system error codes BUSINESS INKJET 2600

System Error Problem description LCD messaging HP service center actions

O110 Electronics module failure Printer error: please turn printer off and on again Replace the Electronics module
O112 Electronics module failed during the firmware upgrade or the Electronics module failed during initializ Printer error: please turn printer off and on again NA
O210 Carriage failure Printer error: please turn printer off and on again Replace carriage assembly
O811 Front panel cannot be detected Printer error: please turn printer off and on again Power cycle else reconnect front panel
1110 Trailing cable failure Printer error: please turn printer off and on again Replace the carriage assembly else the electronics module
1111 Trailing cable badly connected Printer error: please turn printer off and on again Reconnect the trailing cable to the Electronics module else replace the Carriage assembly
2110 Service station failure Printer error: please turn printer off and on again Replace the service station assembly
2210 Ink supply station failure Printer error: please turn printer off and on again Replace the Ink supply station
4210 Carriage motor failure Printer error: please turn printer off and on again Replace the carriage motor assembly
5610 Error during the calibration of the motor encoder system or a problem finding the zero position on th Printer error: please turn printer off and on again Replace the paper axis motor drive assembly or replace the encoder disc
6404 Firmware error (USB port) Firmware error: press RESUME, or unplug power cable and restart prNA
6504 Firmware error (Communication failure) Firmware error: press RESUME, or unplug power cable and restart prNA
7103 Firmware error (Out of memory) Firmware error: press RESUME, or unplug power cable and restart prNA
7103 Firmware error (Out of memory) Firmware error: press RESUME, or unplug power cable and restart prNA
7204 Firmware error (expected) Firmware error: press RESUME, or unplug power cable and restart prNA
7904 Firmware error (unexpected) Firmware error: press RESUME, or unplug power cable and restart prNA
8101 Paper axis shutdown - usually a paper jam caused by a blockage of the paper axis system paper jam: open cover, check trays, rear access panel and clear papReplace the paper axis motor drive assembly
8310 Sheet feeding failure Printer error: please turn printer off and on again Replace out of paper sensor else replace electronics module
8510 Paper axis encoder error Printer error: please turn printer off and on again Make sure encoder sensor cable is connected correctly else replace paper axis motor drive or electronics module
8601 Paper axis shutdown - usually a paper jam caused by a blockage of the scan axis system paper jam: open cover, check trays, rear access panel and clear papPower down printer and clear paper jam else try lubricating the slider rod, or replacing the Service station assembly or replace the Carriage motor assembly
8611 Scan axis shutdown during initialization. Typically, this error occurs when printer detects an incorrect paper jam: open cover, check trays, rear access panel and clear papUnplug power cable and replug, power cycle. Else check that the paper axis drive motor assembly is correctly installed and that the bushing is correctly locked in place else replace the carriage assembly
O111 Electronics module is incorrectly positioned Printer error: please turn printer off and on again Reseat the electronics module by removing it from the printer and reinstalling it again at the correct position
3510 No cleanout assembly (or Duplexer, if installed) detected while loading media Printer error: rear access panel or autoduplexer missing Remove and reinstalled the cleanout assembly, else replace duplexer interconnect PCA else replace cleanout assembly
6510 Communication failure Communication Error: Turn printer off and check connections NA
7114 Out of memory while trying to process firmware upgrade file. Probably this is a firmware bug, beca Firmware error: press RESUME, or turn printer off and upgrade firm Switch off printer, Hold (Resume + Cancel) + PressRelease (Power). Upgrade firmware
7412 Firmware bug in the upgrade process Firmware error: press RESUME, or turn printer off and upgrade firm Download special file in order to update the Bootlog. Request for following info: Firmware release, printer serial number (as found on the info page)
9500 Printhead alignment failure - Printhead alignment cancelled Printhead alignment failure - Printhead alignment cancelled NA
9502 Printhead alignment failure - Printhead alignment cancelled Printhead alignment error: Clean printhead, or replace faulty printhe NA
9504 Firmware error (during printhead alignment) Printhead alignment error: Clean printhead, or replace faulty printhe NA