Scribd
Upload
264 views1 page

Specification AL 150/300/600: Particle Size (1) (ISO 4406) 0.5 Micron 0.5 Micron 0.5 Micron

The document describes three different models of Micfil Ultra Fine Filters - AL 150, AL 300, and AL 600. The key specifications of each model are listed such as particle size filtration, dimensions, weight, volume, flow rates, and element change intervals for different fluids. Micfil filters can filter engine oil, gearbox oil, hydraulic oil, and fuels. They are suited for installation in engines and machinery as either main filters or after-market filters to reduce wear and maintenance costs.

Uploaded by

علوي الهاشمي
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
264 views1 page

Specification AL 150/300/600: Particle Size (1) (ISO 4406) 0.5 Micron 0.5 Micron 0.5 Micron

The document describes three different models of Micfil Ultra Fine Filters - AL 150, AL 300, and AL 600. The key specifications of each model are listed such as particle size filtration, dimensions, weight, volume, flow rates, and element change intervals for different fluids. Micfil filters can filter engine oil, gearbox oil, hydraulic oil, and fuels. They are suited for installation in engines and machinery as either main filters or after-market filters to reduce wear and maintenance costs.

Uploaded by

علوي الهاشمي
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Specification AL 150/300/600

AL 150 AL 300 AL 600


Particle size (1) (ISO 4406) 0.5 micron 0.5 micron 0.5 micron
Housing material Aluminium Almg 4.5 Aluminium Almg 4.5 Aluminium Almg 4.5
Height, overall 170mm 340mm 640mm
Diameter at flange 170mm 170mm 170mm
Diameter at base 130mm 130mm 130mm
Weight 2.37 kg 2.69 kg 3.75 kg
Weight of element 0.22 kg 0.52 kg 1.04 kg
Volume 2 Ltr 4 Ltr 8 Ltr
Inlet/Outlet connections 1/2” id 1/2” id 1/2” or 3/4” id
Max Pressure * 10 bar (20 bar) 10 bar (20 bar) 10 bar (20 bar)
Temperature Range -20˚/120˚C -20˚/120˚C -20˚/120˚C
Flow rate/fuel (2) 350 Ltr/hr 700 Ltr/hr 1400 Ltr/hr
Tank capacity engine oil (2) Up to 50 Ltr Up to 100 Ltr Up to 300 Ltr
Tank capacity hydraulic oil (2) (ISO VG 46) Up to 250 Ltr Up to 500 Ltr Up to 750 Ltr
Tank capacity gearbox (2) Up to 125 Ltr Up to 250 Ltr Up to 375 Ltr
Element change interval - fuel 800 - 1000 h 800 - 1000 h 2000 h
Element change interval - engine oil 500 - 600 h 600 - 800 h 1000 h
Element change interval - hydraulic oil 1000 - 1500 h 1000 - 2000 h 1000 - 2000 h
Element change interval - gearbox oil 800 h 1000 h 1500 h
Element change interval - bio diesel 800 h 800 h 800 h
Water absorber yes yes yes

(1) The patented Micfil Ultra Fine Filter element consists of a tear-resistant fibre mesh with woven-in cellulose fibres.
The filtration performance is down to 0.5 microns. The element possesses a very high contamination absorption
capacity, long life span, lower differential pressure and is water absorbent.

(2) Two or more Micfil filters can be installed in line to increase flow/tank capacity.
ie: Fuel flow rates from 350 L/h to 15,000 L/h are available.

* 20 bar Filters available on request

The Micfil Ultra Fine filters are suited for the filtration of engine oil, gear box oil, and hydraulic oil as well as for fuel.
With engine and gearbox oil, the filter is placed in a bypass, for fuel it is in the main stream and for hydraulic oil it is
in the return.
They can be installed in all engines and all machinery as main filters, or as after-market filters which reduce frictional
wear, lengthen the life span and lower maintenance costs of your machinery.

The Micfil Filter Element can be used for:


Diesel Engine oil Synthetic engine oil Synthetic oil
Bio oil Hydraulic oil Transformer oil Compressor oil
Petrol Gear oil Turbine oil Heavy oil
Heating Oil Deep frying oil
NOTE: The Micfil elements are food safe
Differential pressure in fuel flow is 0.00 bar - 0.15 bar at full flow

The Micfil Ultra Fine Filter possesses approximately 20 times higher filtration performance than a standard filter element.
Dirt, combustion, oxidation and abrasion particles are continuously filtered out from the oil, thereby minimising abrasion.
The remaining smaller particles in the oil do not cause damage, but increase the load bearing capacity (Lubricity)
and thermal resistance of the oil. The Micfil Ultra Fine Filter element is manufactured from the highest quality materials,
absorbs water and stops formation of acid in the oil.

Pro Quip International


14 London Dve Bayswater VIC 3153 Australia
Tel: (03) 9761 1110 Email: [email protected]
VALUE ADDED PRODUCTS www.proquip.com.au

You might also like