Scribd
Upload
278 views4 pages

Pile Capacity FINEL FINEL BY SIR

The document provides information for calculating the ultimate bearing capacity of a pile foundation for a residential complex project. It includes soil data for 5 layers down to a depth of 10.5 meters, with the water table at 0 meters. Calculations are shown for skin friction capacity in cohesionless and cohesive soils in each layer, resulting in a total skin friction capacity of 126 tons. End bearing capacity is also calculated, with values of 137.28 tons for cohesionless soil and 0 tons for cohesive soil, giving a total ultimate capacity of the pile of 263.28 tons. The safe load on the pile is determined to be 105 tons.

Uploaded by

Er Navneet Jassi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
278 views4 pages

Pile Capacity FINEL FINEL BY SIR

The document provides information for calculating the ultimate bearing capacity of a pile foundation for a residential complex project. It includes soil data for 5 layers down to a depth of 10.5 meters, with the water table at 0 meters. Calculations are shown for skin friction capacity in cohesionless and cohesive soils in each layer, resulting in a total skin friction capacity of 126 tons. End bearing capacity is also calculated, with values of 137.28 tons for cohesionless soil and 0 tons for cohesive soil, giving a total ultimate capacity of the pile of 263.28 tons. The safe load on the pile is determined to be 105 tons.

Uploaded by

Er Navneet Jassi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

PROJECT :- Resi.

Complex of CGEWHO at Mohali Ann "C"


DEPTH OF PILE below GL=14.5M, 0.3m dia.

No. of layers of soil (n) = 2 Nos.

Factor of safety for evaluating pile capacity = 2.5 As per IS-2911(Part-1, Sec-2):2010

Stem diameter of pile (D) = 0.6 m

Depth of soffit of pilecap below ground level = 1 m

Depth of ground water table = 0.0 m

Total Depth of Pile= 10.5

Soil data for different layers:


Layers from G.L Layer-1 Layer-2 Layer-3 Layer-4 Layer-5

Depth of layer m below cut off level h 0 0 0 10.5 0

Bulk Unit weight of soil t/m3 g 1.86 1.86 1.86 1.86 1.86

Eff. Unit weight of soil t/m4 ge 1.86 1.86 1.86 1.86 0.86

Surface area of pile stem Asi 0.00 0.00 0.00 19.80 0.00

1 For Cohessionless soils (Due to Skin Friction )


Coefficient of Earth pressure (K=1 to 2 for Loose Med.S) K 1 1 1 1 1

Angle of wall friction b/w pile & soil d 30 30 30 31 30

Degrees to radians 0.523 0.523 0.523 0.541 0.523

Tan Value 0.577 0.577 0.577 0.600 0.577

Angle of internal friction f = d f 30 30 30 31 30

Eff. Overburden pressure PDI 0.00 0.00 0.00 9.77 0.00


Ultimate Bearing Capacity of Pile [ K.PDI.Tand.ASI ] Qus 0.00 0.00 0.00 116.102 0.000 116.10

2 For Cohesive soils (Due to Skin Friction)


Average cohesion throughout length of pile t/m2 Based on corrected N Values
C= 1 1 1 1 1

Average cohesion throughout length of pile t/m2 Cx Asi 0 0 0.00 19.8 0.0

Adhesion Factor α a 0.9 0.9 0 0.5 1.5


Ultimate Bearing Capacity of Pile [ a.C.AS ] Qus 0.00 0.00 0.00 9.90 0.00 9.90

Total Ultimate Bearing Capacity due to Friction Qu 126.00

3 Due to End Bearing


Cross sectional area of pile toe AP 0.2829

For Cohessionless soil


a σv at tip = 19.53

Bearing capacity factor Nq 25.85

Eff. Overburden pressure at pile toe PD 19.53

Ultimate Bearing Capacity σv. [Nq-1 ]. Ap Que 137.28

b For Cohesive soils


Bearing capacity factor Nc 38.13

Average cohesion at pile tip CP 0 From range of N values (IS-2911)

Ultimate Bearing Capacity [ C . Nc. Ap Que 0.00

Total Ultimate Capacity of Pile (Tons) Qu 263.28


Safe Load on Pile (Tons) Q 105.31 Say = 105.00 T
from testing CORRECTED N

IS-2911 Part IV Clause5.8.3 NSL


decision of designer 13

from testing N1 14

10.5

15

from testing WT N1=


19 17.6

from lab testing

16 Nc

pie x Dia of pile x Depth of pile in that layer 0 33 DEG 38.13


22

from geotech investigation 24

0.6 N2=
N2 25 34.0

1.2

37 37 deg 38.13

50
Nq Nϒ

25.85 35.21

25.85 35.21

You might also like