Scribd
Upload
329 views3 pages

MCGB - Data Sheet For Suppliers Old MAT Nos.: 208, - , - : Heat-Treatable Steel, Carbon Steel

This document provides specifications for a heat-treatable carbon steel, including its properties, standards, chemical composition, mechanical properties, alternative international standards, delivery conditions, and revision history. The steel has a tensile strength of 700-950 MPa after heat treatment and is used for small details in machine constructions. The primary standard for the steel is EN 10083-1 (1991) + A1 (1996) for material 28Mn6 (1.1170). It must be delivered in a quenched and tempered condition, quenched from 830-870°C and tempered from 540-680°C.

Uploaded by

baskaran ayyapparaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
329 views3 pages

MCGB - Data Sheet For Suppliers Old MAT Nos.: 208, - , - : Heat-Treatable Steel, Carbon Steel

This document provides specifications for a heat-treatable carbon steel, including its properties, standards, chemical composition, mechanical properties, alternative international standards, delivery conditions, and revision history. The steel has a tensile strength of 700-950 MPa after heat treatment and is used for small details in machine constructions. The primary standard for the steel is EN 10083-1 (1991) + A1 (1996) for material 28Mn6 (1.1170). It must be delivered in a quenched and tempered condition, quenched from 830-870°C and tempered from 540-680°C.

Uploaded by

baskaran ayyapparaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

MAT 2130

MCGB - DATA SHEET FOR SUPPLIERS Old MAT Nos.: 208, -, -

Heat-treatable Steel, Carbon Steel

For more information contact F.L. Smidth

PROPERTIES:
Heat-treatable Carbon Steel with tensile strength after heat treatment of 700-950 Mpa.
Used for small details in ordinary machine constructions.

STANDARDS:
General requirements:
When reference to this MAT NO appears on FLS Drawing or FLS Parts List or in FLS Purchace Order the data from the
Primary Standard is used as acceptance criteria.

Specific deviations in requirements made in the FLS Parts List, the FLS Purchace Order or a FLS Instruction always
overrules this data sheet.

Alternatively accepted International Standards listed in this sheet may be used if the suppliers documentation covers at
least the documentation required in the Primary Listed Standard. This means that supplementary tests in some cases
will be necessary.
Primary Standard:
EN 10083-1 (1991) + A1 (1996) , MATERIAL: 28Mn6 , MATERIAL No.: 1.1170
Quenched and tempered steels - Part 1: Technical delivery conditions for special steels.
In case of dimensions larger than 250 mm use supplementary standard S-EW 550 (1976) mat 1.6580

CHEMICAL COMPOSITION:
Dim, mm % C max % Si max % Mn max or % P max % S max % N max % Al min
or range or range range or range or range or range or range
0.25-0.32 0.4 1.3-1.65 0.035 0.035 - -

Dim, mm % Cr max % Mo max % Ni max % V max % Nb max % Ti max % Cu max % Other max
or range or range or range or range or range or range or range or range
0.4 0.1 0.4 - - - -
%Cr+%Mo+%Ni < 0.63%

MECHANICAL PROPERTIES AT ROOM TEMPERATURE:


Condi- Dim, mm Tensile Strength Yield Strength Elong. Area M.Elas Hardness Imp. Energy
tion MPa MPa % Reduction GPa KV, min
Rm Re A5 Z Z E HRc HB HV °C J
Q+T 0-16 800 - 950 590 - 13 - 40 - - - 250 - 300 - 35
Q+T 16-40 700 - 850 490 - 15 - 45 - - - 240 - 280 - 40
Q+T 40-100 650 - 800 440 - 16 - 50 - - - 220 - 260 - 40
Q + T : Quenched and Tempered

Rev_No: 0,70 Issue_Date: 01-06-1998 Prepared by: AsK


Rev_Date: 15-01-2004 Approved by: ESJ Page 1 of 3
MAT 2130

MCGB - DATA SHEET FOR SUPPLIERS Old MAT Nos.: 208, -, -

Heat-treatable Steel, Carbon Steel

For more information contact F.L. Smidth

ALTERNATIVE INTERNATIONAL STANDARDS TO MAT 2130


Standard Type of Material Name of Material Material No.
ASTM A 322 (1991) Bars Gr. 1330 .
EN 10083-1 (1991) + A1 (1996) General 28Mn6 1.1170
ISO 683-1 (1987) General 28Mn6 .
JIS G 4106 (1979) General S Mn 4 3 3 .

ACEA: Association des Constructeurs Europeans d'Automobiles DIN: Deutsche Industrie-Norm


AGMA: American Gear Manufacturers's Association EN: European Norm
API: American Petroleum Insitute IEC: International Electrotechnical Commission
ASTM: American Society for Testing Material ISO: International Organisation for Standardizatio
BS: British Standard JIS: Japanese Industrial Standard
CCMC: Committee of Common Market Constructors NLGI: National Lubricating Grease Institute
DS: Dansk Standard SAE: Society of Automotive Engineer

DELIVERY CONDITIONS:
This material shall be delivered quenched and tempered. Quenching: from 830 - 870 °C in water or oil.
Tempering: 540 - 680 °C

Rev_No: 0,70 Issue_Date: 01-06-1998 Prepared by: AsK


Rev_Date: 15-01-2004 Approved by: ESJ Page 2 of 3
MAT 2130

MCGB - DATA SHEET FOR SUPPLIERS Old MAT Nos.: 208, -, -

Heat-treatable Steel, Carbon Steel

For more information contact F.L. Smidth

Revisions:
Rev. No Rev. Date Change Responsible
0,60 31-01-2002 Text editions AnJo
Prepared & Approved changed
References to Alternative Standards added to supplier version
Hardness interval can not be used as only acceptance criteria
0,80 15-01-2004 Standards updated. Rev_no updated. An extra decimal place added. AsK

Rev_No: 0,70 Issue_Date: 01-06-1998 Prepared by: AsK


Rev_Date: 15-01-2004 Approved by: ESJ Page 3 of 3

You might also like