0% found this document useful (0 votes)
27 views2 pages

Masterflow 400: Degussa

Uploaded by

faisal nadeem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
27 views2 pages

Masterflow 400: Degussa

Uploaded by

faisal nadeem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

( ‫)ﺍﻭﻟﻴﻦ ﻧﻤﺎﻳﺸﮕﺎﻩ ﻭ ﻓﺮﻭﺷﮕﺎﻩ ﺍﻟﻜﺘﺮﻭﻧﻴﻜﻲ ﻣﺼﺎﻟﺢ ﺳﺎﺧﺘﻤﺎﻧﻲ‬ ‫ﺑﺎﺯﺍﺭ ﻣﺤﺎﺭﻡ‬

degussa. creating essentials ‫ﺷﺮﻛﺖ ﺩﮔﻮﺳﺎ ﺍﻳﺮﺍﻧﻴﺎﻥ‬

MASTERFLOW®
400
High strength, free flowing epoxy grout

Description • Non-shrink and tolerant of damp surfaces.

MASTERFLOW 400 is a solvent free epoxy Packaging / yield


resin grout formulated to withstand static and
MASTERFLOW 400 is supplied in 15kg, which
dynamic loads in a wide variety of applications.
yields 7.5 litres.

MASTERFLOW 400 is suitable for an Typical properties*


application thickness range of 10-80mm. The * Properties listed are only for guidance and are
product is three component and easily mixed on not a guarantee of performance.
site, to a pourable consistency.
Pot life: at 70 min
Typical applications 25°C
at 40 min
40°C
• Crane and transporter rails. Compressive strength (ASTM C579- 7 days 104
91): N/mm²
• New and old machine base plates.
Flexural strength (BS 6319 Part 3 7 days 27.5N/mm
• Structural filling of holes and cavities in 1983): ²
Tensile strength (BS 6319 Part 7): 7 days 15 N/mm²
concrete. Density: 2000
• Industrial equipment and machinery subject kg/m³
Cure: at 7 Days
to static or dynamic forces. 25°C
at 3 Days
• Equipment where chemical and acid spillage 40°C
-5
occurs. Co-efficient of thermal expansion 8 x 10 /°C
(ASTM C531-95):
Secant modulus of elasticity 28 9300N/m
(ASTM C580-93): days m²
Advantages

• No priming required. Placing:


• Excellent flow characteristics. Place immediately after mixing, into the
• Long pot-life. prepared area in such a manner that it has the
• High tensile, flexural and compressive shortest distance to flow. For long pours a
strength. suitable head of pressure may be required.
• Excellent adhesion to steel and concrete. Ensure the area to be grouted is not completely
• Rapid installation and strength gain. sealed, and any displaced air can be expelled.
• High resistance to dynamic loads and Pour continuously from one side only.
chemical attack.

١٥٨٧٥-٣٦٨١ ‫ ﺻﻨﺪﻭﻕ ﭘﺴﺘﻲ‬٨٤١٠٣٥١ -٨٤٣٠٤١٢ :‫ ﺗﻠﻔﻦ ﻭ ﻧﻤﺎﺑﺮ‬٩ ‫ ﻭﺍﺣﺪ‬٩ ‫ ﺍﻧﺘﻬﺎﻱ ﺧﻴﺎﺑﺎﻥ ﺍﺳﺘﺎﺩ ﻣﻄﻬﺮﻱ ﭘﻼﻙ‬- ‫ﺗﻬﺮﺍﻥ‬
http://www.bazarmaharem.com E-Mail: [email protected]
1
( ‫)ﺍﻭﻟﻴﻦ ﻧﻤﺎﻳﺸﮕﺎﻩ ﻭ ﻓﺮﻭﺷﮕﺎﻩ ﺍﻟﻜﺘﺮﻭﻧﻴﻜﻲ ﻣﺼﺎﻟﺢ ﺳﺎﺧﺘﻤﺎﻧﻲ‬ ‫ﺑﺎﺯﺍﺭ ﻣﺤﺎﺭﻡ‬
degussa. creating essentials ‫ﺷﺮﻛﺖ ﺩﮔﻮﺳﺎ ﺍﻳﺮﺍﻧﻴﺎﻥ‬

Allow the grout to set prior to removal of Reseal containers after use. For specific
formwork (normally after 6 hours). Where storage and disposal instructions refer to the
placement exceeds depths of 80mm, Material Safety Data Sheet.
application should be carried out in layers. The
second layer to be applied after 6 hours. Note

Equipment care Field service, where provided, does not


constitute supervisory responsibility. For
Clean all equipment promptly with CLEANING additional information contact your local
SOLVENT NO. 2. Any excess cured material Degussa representative.
will have to be mechanically removed.

Storage Degussa reserves the right to have the true


cause of any difficulty determined by accepted
Store under cover out of direct sunlight and test methods.
protect from extremes of temperature. In
tropical climates the product must be stored in Quality
an air-conditioned environment. Shelf life is up
to one year when stored in unopened All products produced by Degussa certified
containers as above. manufacturing facilities, are produced to
conform to systems designed to meet
Failure to comply with the recommended internationally recognised quality standards.
storage conditions may result in premature
deterioration of the product or packaging. For REQUEST AND REFER TO RECOMMENDED

specific storage advice consult Degussa's INSTALLATION PROCEDURES FOR MASTERFLOW

Technical Services Department. EPOXY GROUTS PRIOR TO USE

11/2003 Degussa-IR
Safety precautions

As with all chemical products, care should be


taken during use and storage to avoid contact
with eyes, mouth, skin and foodstuffs (which
can also be tainted with vapour until product is
fully cured or dried). Treat splashes to skin and
eyes immediately. If accidentally ingested,
seek medical attention.

١٥٨٧٥-٣٦٨١ ‫ ﺻﻨﺪﻭﻕ ﭘﺴﺘﻲ‬٨٤١٠٣٥١ -٨٤٣٠٤١٢ :‫ ﺗﻠﻔﻦ ﻭ ﻧﻤﺎﺑﺮ‬٩ ‫ ﻭﺍﺣﺪ‬٩ ‫ ﺍﻧﺘﻬﺎﻱ ﺧﻴﺎﺑﺎﻥ ﺍﺳﺘﺎﺩ ﻣﻄﻬﺮﻱ ﭘﻼﻙ‬- ‫ﺗﻬﺮﺍﻥ‬
http://www.bazarmaharem.com E-Mail: [email protected]
2

You might also like