Scribd
Upload
150 views4 pages

Read Me

This document provides information about the HIMAX MPTool application, including included files, supported device drivers, version history and change log. The main application and library files that are included are listed. Supported device drivers for various USB to I2C/SPI bridge chips are also listed. The version history shows updates to support additional flash chips, boards, and features like remote control functions and HDCP key programming.

Uploaded by

Ankur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
150 views4 pages

Read Me

This document provides information about the HIMAX MPTool application, including included files, supported device drivers, version history and change log. The main application and library files that are included are listed. Supported device drivers for various USB to I2C/SPI bridge chips are also listed. The version history shows updates to support additional flash chips, boards, and features like remote control functions and HDCP key programming.

Uploaded by

Ankur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

========================================================================

HIMAX MPTool ReadMe


========================================================================
File including:

Application and Library


.\HX_MPTool.exe -Main Application
.\lptio.dll -Peripheral Device library include I2C, SPI, USB, LPT etc
.\WinIo.dll -Library for windows driver
.\firmware.hex -Firmware for Cypress USB, CY7C68013A

Device Driver:
.\Drivers\CH341PAR Usb
.\Drivers\Cypress Usb
.\Drivers\Dimax(Diolan) U2C
.\Drivers\WelTrend Usb2IIC

/////////////////////////////////////////////////////////////////////////////
Version log:
0.5.36
-Fix RVG ISP speed up setting

0.5.35
-Add RVG chip option
-Support MX25L512 flash

0.5.34
-Not RDSR when wait done

0.5.33
-Add I2C speed slow option

0.5.32
-Support 715GT089-C board

0.5.31
-Support S25FL064K flash

0.5.30
-add M2G HDCP checksum function

0.5.29
-Modify "Enable DDC/CI IR" string to "Enable DDC/CI Remote Controller" String
-Modify M2G programming function with M2G EVB (magic4 mp evb) settings
-Add function of DDC/CI remote controller auto test by test script file

0.5.28
-Modify "8051 FW" string to "M2G FW" String in MP Tool

0.5.27
-Support EDID bin file programming

0.5.26
-Fix 715GT039 print port board SDA in

0.5.25
-Support 715GT039 print port board

0.5.24
-Modify DDC/CI register write question

0.5.23
-Add M2G programming function
-Modify isp page memory leaks question
-Add file version describe
-M2G keep HDCP Key function
-Modify DDC/CI register write question

0.5.22
-Add remote controller function with DDC/CI
-Modify memory leak question

0.5.21
-Add M2I ISP WP diable setting

0.5.20
-Add HIMAX FTDI board checking to limit I2C fast mode clock
-Add M2I chip option to support M2I PQ files

0.5.19
-FTDI I2C fast mode as 400Khz
-Fix FTDI I2C ISP stability with new lptio.dll
-Fix GUI item not enable when erase all and force stop

0.5.18
-FTDI I2C fast mode as 300Khz
-FTDI write buffer not work with I2C device ID 0xF4

0.5.17
-Add pure ISP option

0.5.16
-Add FTDI GPIO settings

0.5.15
-Fix PP value not revert with G1 set when write sector protect array fo
Pm25LD020

0.5.14
-Write protect setting in sector protect array of Pm25LD020 SPI flash after
Programming finish

0.5.13
-Support Pm25LD020 SPI flash

0.5.12
-Support W25Q32BV SPI flash
-Add check K310 button at I2C ISP page

0.5.11
-Fix EDID update fail with WT or FTDI USB

0.5.10
-Update lptio.dll to fix FDTI I2C RX first bit always being 0 with no sharp
SCL rising edage

0.5.9
-Update lptio.dll to fix FDTI I2C waveform of SDA change at SCL falling edge
when I2C TX

0.5.8
-Update lptio.dll to fix FDTI I2C ReStart waveform for being compatible with
scaler G1 set

0.5.7
-Support A25L512, A25L010, A25L020, A25L040, A25L080, A25L016, A25L032, and
A25LQ032 SPI flash

0.5.6
-Fix M6G2 can't power on after programming with FTDT
-Remove another bulk CRC calculate after programming success

0.5.5
-Support FTDI FT2232D USB board
-Support W25X10, W25X20, W25X40, EN25B40 and EN25B40T SPI flash

0.5.4
-Fix write test not disable protect first when flash type is MXIC 2026 flash
-Fix panel name of panel coefs can't support whitesapce character
-Fix I2C ISP panel coefs merge/programming error of one more byte for BL PWM
freq
-Fix I2C ISP panel coefs merge/programming error over panel coefs area

0.5.3
-Fix EDID programming may corrupt firmware content

0.5.2
-Fix special string file programming may corrupt firmware content
-Fix panel coefs default value

0.5.1
-Support special string in I2C ISP page
-Support MX25L1605D/MX25L3205D/MX25L6405D SPI flash

0.5.0
-Support M6G2 coefs

0.4.55
-Support AMIC AM25L040 SPI flash

0.4.54
-Support EON EN25F40 SPI flash

0.4.53
-Try to fix flash auto detect fail
-Support Winbond W25X80A SPI flash
-Detect tag in boot logo for animation type

0.4.52
-Device Selection notification

0.4.51
-UART/I2C, VGA/DVI port switching in Debug page
0.4.50
-Support CVT boot animation
-Auto Connect after device reset on Cypress USB
-support speed up M6 system clock with I2C
0.4.49
-Default Setting for HDCP key function
-Keep HDCP key function on/off auto changes when chip changes
-Pop message to user when disable HDCP key function
0.4.48
-debug port (VGA/DVI) switching @ debug page
-Flash erase sector/All for MX2026C
0.4.47
-Support M2D+
-Add keep HDCP key option
0.4.46
-Separate HDMI EDID programming
0.4.45
-Disable write protect before clear logo
-Manual timeout for UART SPI update
-Fix type display of timing delay of panel coefs
-Add stop checking in retry of I2C ISP
-Remove K310 size check
0.4.44
-Support MX25L6445E flash
-Support barcode programming
-Support additional 1D gamma tables for skyworth
0.4.43
-Add MX25L12845E flash support
-Fix checksum value 4-digital display
-Read ISP ID by normal I2C speed
-Support programming standby M6V2 with fast I2C speed
0.4.42
-Support MXIC 2026C
-add Flash auto detect for MX2026
0.4.41
-Add Dither check function
-Add Mx DDCCI function call
-Support 8Mbit MXIC SPI Flash
-Add RGB gain table in PQ coefs
0.4.40
-I2C ISP page support firmware size greater than 512KB
-Panel coefs page support export/create/delete/modify/add
-Rename TPV lpt port and skyworth usb
-Add driver of Skyworth USB to I2C board
/////////////////////////////////////////////////////////////////////////////

You might also like