Scribd
Upload
54 views2 pages

Test Corners

This document provides information about Test Corners produced by Lisun Electronics Inc., including their main application for temperature rise testing, technical parameters such as size and temperature measurement capabilities, basic configuration, and installation and operation instructions. The Test Corners are designed to measure the temperature at 48 points on samples being tested for compliance with IEC60335-1 standards.

Uploaded by

lisun008
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views2 pages

Test Corners

This document provides information about Test Corners produced by Lisun Electronics Inc., including their main application for temperature rise testing, technical parameters such as size and temperature measurement capabilities, basic configuration, and installation and operation instructions. The Test Corners are designed to measure the temperature at 48 points on samples being tested for compliance with IEC60335-1 standards.

Uploaded by

lisun008
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Test corners

(CSJ-A)

Brochure

Global Office of Lisun Electronics Inc.


http://www.Lisungroup.com

Lisun Group (Hong Kong) Limited


Add: Room 803, Chevalier House, 45-51 Chatham Road South, Tsim Sha Tsui, KL, HK
Tel: 00852-68852050 Fax: 00852-30785638
Email: [email protected]

Lisun Electronics (Shanghai) Co., Ltd


Add: 113-114, No. 1 Building, Nanxiang Zhidi Industry Park, No. 1101, Huyi Road, Jiading
District, Shanghai, 201802, China
Tel: +86(21)5108 3341 Fax: +86(21)5108 3342
Email: [email protected]

Lisun Electronics Inc. (USA)


Add: 445 S. Figueroa Street, Los Angeless, CA 90071, U.S.A.
Email: [email protected]

Lisun China Factory


Add: NO. 37, Xiangyuan Road, Hangzhou City, Zhejiang Province, China
Tel: +86-189-1799-6096
Email: [email protected]

Leader in Lighting & Electrical Test Instruments


Rev. 10/18/2019
Lisun Electronics Inc. [email protected] www.Lisungroup.com

Test corners

1.Name of good: Test corners


2.Main application: Temperature rise test
3.Work condition: AC 220V～50Hz
4.Technical Parameters
 Test angle size: 800x800x1000mm
 Thermocouple: Thermocouple with a diameter less than 0.3mm
 Thermocouple arrangement: All drawn on a wire
 Copper for Temperature Testing: diameter 15mm, thickness 1mm(Brass plate)
 Temperature measuring point: 48
 Test angle temperature measuring point: With 100*100mm covering
 Plywood: Thickness of about 20mm, the front is painted with no light black paint,
and the back is pasted with gray film board.
 General requirements IEC60335-1

5.Basic configuration
 Test corners: 1 set
 Spare Brass plate

6.Installation connection
After opening the box, connect the plug of thermocouple wire to the interface of
temperature measuring. And connect the end of thermocouple wire with plug to the
terminal of thermo-detector ’s rear cover.

7.Operation method
 Put the test sample on the test angle as required and on the power supply.
 Through the trunking, thermocouple leads the power to the terminal of
thermo-detector ’s rear cover of the side.
 Measuring the temperature of each point of the current measurement surface

-Page 1 -

You might also like