SOLENOID VALVES 2/2 NC

3
2/2
flapper mechanism, fluid isolation 1
3 3/2
2/2 NO Series
1/8 or pad mounting body
2
1
068
size 22 mm 3/2 U
3 1

FEATURES
• Solenoid valves for use with neutral or aggressive liquids and gases in analytical
and medical systems
• Hermetic separation of control mechanism and fluid:
- Prevents particulate contamination caused by friction of moving parts, assuring
maximum purity of fluid
- Ensures reliable operation in applications with highly aggressive fluids
• Reduced heat transfer between control mechanism and fluid
• Good self-draining capability and easy-to-flush internal cavity
• Low internal volume
• Specific flappermechanism: no pump effect, no stick effect
• Possibility to adapt a power-save connector
• Electrical spade-plug or cable-end connection

GENERAL
Differential pressure -0,9 to +10 bar (usable in 0,1 bar abs. vacuum) [1 bar =100 kPa]
Maximum viscosity 20 cSt (mm2/s)
Response time < 10 ms
Internal volume < 0,48 ml (connections not included)
fluids () temperature range (TS) seal materials ()
FFPM (perfluoroelastomer)
liquids or gases
+5°C to + 50°C FPM (fluoroelastomer)
(filtered 50 µm)
EPDM (ethylene-propylene)

MATERIALS IN CONTACT WITH FLUID

() Ensure that the compatibility of the fluids in contact with the materials is verified
Body PEEK 1 3
Diaphragm FFPM (FPM and EPDM option) 2/2 NC function
Seals FFPM (FPM and EPDM option)

OTHER MATERIALS
Internal parts Stainless steel

ELECTRICAL CHARACTERISTICS
Coil insulation class F
Connector Spade plug (cable Ø 6-8 mm) or cable ends (2)
Connector specification DIN 43650, 11 mm, industry standard B
Electrical safety IEC 335 (cable ends: EN 60730)
Electrical enclosure protection Moulded IP65 (EN 60529) 1 3
Standard voltages DC (=) : 12V - 24V -5% / +10%
2/2 NO function
(Other voltages on request)
power ratings operator
inrush holding ambient replacement coil
prefix (4)
temperature type (1)
Availability, design and specifications are subject to change without notice. All rights reserved.

option ~ ~ = range (TS)

(VA) (VA) (W) (W) (C°) 12 V DC 24 V DC
9,6 400129-005 -
S1 - - - +10 to + 50 01
10 - 400129-007
L0 - - - 10 +10 to + 50 400119-011D 400119-008D 02
(1)
Refer to the dimensional drawings on page 51.
(2)
0,45 m lead wires.
1 2 3
3/2 U function
RECOMMENDATION FOR MAXIMUM DUTY CYCLE
De-energising time: toff = ton x (100% / ED - 1)
100%
90% Example:
80%
1) Determine energising time in minutes (ton):
Duty Cycle ED

70%
60% ton = 15 min
50%
2) Find maximum duty cycle value in diagram:
40%
30% ED = 60%
20% 3) Calculate de-energising time:
10%
0%
toff = 15 min x (100% / 60% - 1) = 10 min
0 5 10 15 20 25 30 4) Complete cycle time:
Energising Time ton (min) tcycle = ton + toff = 15 min + 10 min = 25 min
01035GB-2014/R01

Note: 100% duty cycle possible when using the power-save

connector (catalogue number [24 V DC]: 88100934,
catalogue number [12 V DC]: 833-150063)

All leaflets are available on: www.asconumatics.eu

Pneutrol International Ltd are Platinium Distributors for ASCO Numatics 49
Contact us : 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU www.valves-direct.com [email protected] Tel: +44 (0) 28 9448 1800
 SOLENOID VALVES SERIES 068
SPECIFICATIONS
operating pressure differential
catalogue number
flow (bar) power
pipe orifice
coefficient max. (PS) coil
size size body
Kv gases (W)
min. PEEK
liquids ()
(mm) (m3/h) (l/min) = = x : see “HOW TO ORDER”
2/2 NC - Normally closed
2 0,10 1,66 -0,9 10 10 G068A317xxx00xx
G 1/8 3 0,16 2,66 -0,9 3 10 G068A318xxx00xx
4 0,3 4,99 -0,9 1,5 10 G068A319xxx00xx
2 0,10 1,66 -0,9 10 10 R068A317xxx00xx
pad
3 0,16 2,66 -0,9 3 10 R068A318xxx00xx
mounting (1)
4 0,3 4,99 -0,9 1,5 10 R068A319xxx00xx
2/2 NO - Normally open
2 0,10 1,66 -0,9 5 10 G068A327xxx00xx
G 1/8 3 0,16 2,66 -0,9 2 10 G068A328xxx00xx
4 0,3 4,99 -0,9 1 10 G068A329xxx00xx
2 0,10 1,66 -0,9 5 10 R068A327xxx00xx
pad
3 0,16 2,66 -0,9 2 10 R068A328xxx00xx
mounting (1)
4 0,3 4,99 -0,9 1 10 R068A329xxx00xx
3/2 U - Universal
2 0,10 1,66 -0,9 5 10 G068A337xxx00xx
G 1/8 3 0,16 2,66 -0,9 2 10 G068A338xxx00xx
4 0,3 4,99 -0,9 1 10 G068A339xxx00xx
2 0,10 1,66 -0,9 5 10 R068A337xxx00xx
pad
3 0,16 2,66 -0,9 2 10 R068A338xxx00xx
mounting (1)
4 0,3 4,99 -0,9 1 10 R068A339xxx00xx
(1)
4 hexagon socket head cap mounting screws M3 x 8 mm, stainless steel, ISO 4762 supplied.

HOW TO ORDER

15-DIGIT PRODUCT CODE

G068A317 xx x 00 xx
catalogue no. voltages
F1 = 24 V DC
F3 = 12 V DC

electrical connection
S1 = spade terminals with connector
L0 = with cable ends 457 mm

seal materials catalogue no.

1 = FFPM
V = FPM
E = EPDM

Availability, design and specifications are subject to change without notice. All rights reserved.
Ordering example: R068A317S1E00F1 = 2-way NC (normally closed), orifice size 2 mm, pad-mounting body width 22 mm,
with spade terminals with connector, EPDM seals, 24 V DC

OPTIONS
• Other subbases, contact us
• Power-save connector (2,5 W after 140 ms of operation), catalogue number of 24 V DC version: 88100934,
catalogue number of 12 V DC version: 833-150063
• Impulse manual operator

INSTALLATION
• The solenoid valves can be mounted in any position without affecting operation
• Pad-mounting solenoid valve supplied with seal
• Pipe connections 1/8 have standard thread according to ISO 228/1
01035GB-2013/R01

All leaflets are available on: www.asconumatics.eu

50 Pneutrol International Ltd are Platinium Distributors for ASCO Numatics
Contact us : 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU www.valves-direct.com [email protected] Tel: +44 (0) 28 9448 1800
 SOLENOID VALVES SERIES 068

DIMENSIONS (mm), WEIGHT (kg)

TYPE 01
Solenoid with spade plug connector (S1)
Epoxy moulded
IEC 335 / DIN 43650
IP65
R068A200..214

= 33 =
2/2 NC 1 3 = 44 =
2 4
9 9 2/2 NC
1 2 3

=
2/2 NO
= =

1 3
15

2/2 NO

= 11
1 2 3
3/2 U 1 2 3 3/2 U
1/8 1 3
1 2 3
A 2
B A
B
C
C

J
G J
H 3
H
3
X 2 x 1/8
X

D D
= = = F = = = = F =
E E

TYPE 02
Solenoid with cable ends (L0)
IEC 335 / cable ends, length 0,45 m
IP40

G068A200..214

= 33 = 2 2/2 NC 1 3
= 44 = 4
9 9 2/2 NC
1 2 3
= =

2/2 NO
15

1
=

3
2/2 NO
= 11

1 2 3
1/8 3/2 U 1 3 1 2 3 3/2 U
2 1 2 3
A
Availability, design and specifications are subject to change without notice. All rights reserved.

A
B B
1
C C 1

G
H 3 H
K K 3

X 2 x 1/8
X

D = F =
= D = = F = = =
1 2 wires, length 0,45 m
prefix catalogue
type A B C D E F G H J K X weight (1) 2 4 mounting holes, max. depth 7 mm, for
option number
self-tapping screw (type EJOT PT, K30)
G068A...S1.. 60 28,5 17,5 46,2 62,5 22,3 60,8 67,8 82 - 33 0,130
01 S1 3 Manual operator location
R068A...S1.. 60 28,5 17,5 50 65 22,3 - 61,8 76 - 27 0,124
01035GB-2013/R01

G068A...L0.. 35 28,5 17,5 46,2 - 22,3 60,8 67,8 - 56,5 33 0,124 4 4 mounting holes Ø 3,2 mm (4 hexagon soc-
02 L0
R068A...L0.. 35 28,5 17,5 50 - 22,3 - 61,8 - 50,5 27 0,120 ket head cap mounting screws M3 x 8 mm,
(1)
Type 01: Incl. coil(s) and connector(s). stainless steel, ISO 4762 supplied.)
Type 02: with 0,45 m cable ends

All leaflets are available on: www.asconumatics.eu

Pneutrol International Ltd are Platinium Distributors for ASCO Numatics 51
Contact us : 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU www.valves-direct.com [email protected] Tel: +44 (0) 28 9448 1800
 SOLENOID VALVES SERIES 068

DIMENSIONS (mm), WEIGHT (kg)

SUBBASE MOUNTING PATTERN

1 4 mounting holes Ø 3,2 mm

=
2 Max. diameter 4,5 mm (3 x)

= 11 =
25
1 2 3

=
1
9 9

= 44 =

= 55 =

2/2 NC
1 2 3

2/2 NO
1 2 3
3/2 U
1 2 3

Availability, design and specifications are subject to change without notice. All rights reserved.
01035GB-2013/R01

All leaflets are available on: www.asconumatics.eu

52 Pneutrol International Ltd are Platinium Distributors for ASCO Numatics
Contact us : 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU www.valves-direct.com [email protected] Tel: +44 (0) 28 9448 1800