BRICK, STONE AND

BLOCK MASONRY
Seismic group UET LHR

1
BASIC DEFINITIONS

 BRICK MASONRY
 The art of building structures using bricks and binding
materials like cement is called brick masonry.
 STONE MASONRY
 The art of building structures using stones and binding
materials like cement is called stone masonry.
 BLOCK MASONRY
 The art of building structures using concrete blocks
with binding materials like cement is called block
masonry.
2
 British
Specification
Recommends
 LENGTH (L)
 Minimum Length = 8-5/8”
 Maximum Length = 8-7/8 ”
L
 WIDTH (W)
 Minimum Width = 4-1/8 ” D

 Maximum Width = 4-1/4 ”

W
 DEPTH (D)
 Minimum Depth = 1-15/16 ”
 Maximum Depth = 2-15/16 ”

3
BRICK MASONRY

4
 Brick Masonry
 1.Definitions
 2.Classification of Brick Masonry
 3.Bond in brick masonry
 4.Types of bonds
 5.Wall Junctions
 6.Masons tools in Brick masonry
 7.Reinforced brick Masonry
 8.Constructions of Brick Masonry
 9.General Principles and precautions in Brick Masonry
 10.TECHNIQUES TO MAKE A BOND BETWEEN OLD AND NEW
MASONRY
 11.Defects and Maintenance of Brick Masonry
5
1.DEFINITIONS
 Masonry & Masonry Units
 Arrises
 Frog or kick
 Course
 Header & Stretcher
 Quoins
 Perpends
 Closure and brick bats
 Facing Backing & Hearting
 Reveals, Jamb, Soffit & Sill
 Column, Pillar, Pier, Pilaster and Stanchion
 Mortar and Grout
 Lintel
 Copping
6
 Masonry
 It is used for the work of a mason.
 Mason is a person who built structures with construction
materials.
 Masonry Units
 It is an artificially prepared regular shape block used in the
masonry works.
Like ….
 Brick in brick masonry
 Stone block in stone masonry
 Concrete block in Block masonry

7
 Frog
 Arises
 The edges formed by the
intersection of plane
surfaces of a brick are
called arises.
 Frog
 The depression provided in
the face of a brick during its
manufacturing is called the
frog.
 Course
Each horizontal layer of bricks Arises
laid in mortar is called course.
Courses

8
 Quoins
 The external corners of a wall are Perpends
called Quoins. And the bricks
forming quoins are called quoin
bricks. e.g. quoin header or quoins
stretcher.
 Perpends
 The vertical joints of the bricks are Quoin
Header

called Perpends. The perpends of Quoin Stretcher

the alternate courses should be in

the same vertical line

9
 Header
 Brick laid with its width in elevation is called header. In a course in
which all bricks are header is called heading or header course.
 Stretcher
 Brick laid with its length in elevation is called stretcher. In a course
in which all bricks are stretcher is called stretcher or stretching
course.

10
 Closure
 Closure bricks are prepared by cutting
standard brick across length or in different ways
to fulfill the requirements of bond in straight
walls, corners, junctions or crosses is called
closures.
They are of four types
 Queen closure
 King closure
 Bevelled closure
 Mitered closure

 Brick bats
 Brick bats are prepared by cutting standard
brick across width.
They are of four types
 Three quarter bat
 Half or square bat
 Quarter bat
 Bevelled bat
11
12
 Facing

 The external face of wall is called facing.

 Backing

 The unexposed or internal face of wall is

called backing.
 Hearting

 Theinterior portion between facing and

backing is called hearting.

13
 Reveals
 It is the vertical brick face of sides of door or
window opening from exterior side is called
reveals.
 Jambs
 It is the vertical sides of door or window opening
to which the door is or window frame is
attached.
 Soffit
 The under surface of any structural member such
as a lintel, a slab is called Soffit.
 Sill
 The horizontal surface at the bottom side of a
door or window opening is called sill.

14
 Column
 The vertical load bearing member whose cross sectional
dimensions are much lesser then its length is called column.
 Pillar
 The vertical member used for ornamental purpose or as
memorial is called pillar. (or) It is an Architectural term for a
column.
 Pier
 It is same as a column, but commonly this term is used for such
columns which are designed to withstand lateral water loads.
(or) the columns of a bridge are known as piers.
 Pilaster
 It is an architectural element used to give the appearance of
a supporting column with only an ornamental function.
 Stanchion
 The vertical load bearing member constructed of rolled steel
section is called stanchion.

15
BRICK PILASTER

16
 Mortar
 The mixture of binding material and fine aggregate
forming a workable past is called mortar.
 Grout or slurry
 The thin paste of cement is called grout or slurry. It is
used to fill the joints.
 Lintel
 A small horizontal member to span up small opening
is called lintel.
 Copping
 It is provided at the top of a wall to avoid dampness.
They are specially designed bricks to cover the tops
of brick parapet walls.
17
LINTEL AND LOAD DISTRIBUTION

18
2.CLASSIFICATION OF BRICK
MASONRY

 According to type of Mortar

 Pucca Masonry
 Pucca & Kutcha Masonry

 According to types of bricks

 First class brick Masonry
 Second class brick Masonry
 Third class brick Masonry
 Kutcha Masonry

19
3.BOND IN BRICK MASONRY
 It is the arrangement of bricks in each layer to avoid the continuity of
vertical joints in any two adjacent courses.
 NECESSITY OF BOND
 Bond in brickwork is provided for the following reasons
 To break the continuity of vertical joints in consecutive courses.
 To ensure longitudinal and lateral strength of the masonry work.
 To distribute the load uniformly over the structural mass.
 To ensure the quality of work.
 To ensure systematic work
 To provide good aesthetics
 To economize the work.
 REQUIRENMENTS OF GOOD BOND IN BRICK WORK
 Bricks should be uniform in size.
 Mortar thickness should be less than 10mm
 Vertical joints in alternate courses should be in a single plumb line.
 Header should be exactly in the middle of stretcher in two consecutive courses.
 Brick bats should be avoided.

20
4.TYPES OF BONDS
Following are the different types of bonds used in
brick masonry work.
BONDS IN MASONRY WALLS
 Header bond
 Stretcher bond
 English bond
 Flemish bond
 Facing bond
 Dutch bond Monk bond
BONDS IN MASONRY COLUMNS
 English bond
 Flemish bond
21
 Header Bond

3/4

3/4

First course or Odd courses

Second course or Even courses 22

Header Bond

23
HEADER BOND

24
HEADER BOND ISOMETRIC VIEW

25
Stretcher Bond

26
STRETCHER BOND

27
ENGLISH BOND

28
2 COURSES OF ENGLISH BOND

29
ENGLISH BOND

30
ENGLISH BOND (ISOMETRIC VIEW)

31
FLEMISH BOND

32
FLEMISH BOND

33
FLEMISH BOND

34
FLEMISH BOND

35
5.WALL JUNCTIONS
 The places where the walls of same or different widths meets or crosses
each other are called wall junctions.
TYPES OF WALL JUNCTIONS
 Two types
 Straight junctions
 Squint junctions
 Straight junctions
 The junctions formed when two walls crossing each other at right angle.
 Corner junctions
 Tee junctions
 Cross junctions
 Squint quoins
 The corner formed when two walls are meeting at some angle.
 Obtuse quoins
 Acute quoins

36
CORNER JUNCTIONS (FLEMISH AND ENGLISH BOND)

37
TEE JUNCTIONS (ENGLISH BOND & FLEMISH BOND)

38
CROSS JUNCTION & SQUINT JUNCTIONS

39
SQUINT QUOINS (ENGLISH BOND)

40
6.MASON’S TOOLS IN BICK MASONRY

 Trowel
 Brick hammer
 Lines and pins
 Spirit level and water level
 Straight edge
 Plumb Line
 Mason’s square (guniya)
 Tape (steel)

41
MASON’S TOOLS

42
USE OF TROWEL & LINES AND PINS

43
USE OF PLUMB BOB AND EDGE

44
7.REINFORCED BRICK MASONRY
 The brick masonry done by embedding reinforcement in rich
cement mortar is called Reinforced brick masonry.

 Reinforcement used may be in the form of

 Steel bars
 Hoop iron
 Wire mesh

45
REINFORCED BRICK MASONRY

46
 8.CONSTRUCTIONS OF BRICK MASONRY

 It is the art of laying bricks in a proper bond with

specified mortar to form a structure.
It involves the following activities…
 Selection of bricks
 Stacking of bricks
 Soaking of bricks
 Preparation of mortar (ASTM Specifications C 270, "Mortar for Unit
Masonry“)

 Laying of bricks

47
9.GENERAL PRINCIPLES AND
PRECAUTIONS IN BRICK MASONRY
 English bond should be used if not specified.
 Bricks used should be well burnt and should be uniform in
size, shape and color.
 For facing work selected bricks should be used.
 Curing of bricks should be done for at least 2 hours.
 Frogs can be pointed downward or upward or as
specified by the Engineer, but the important matter is to
fill the frog with mortar.
 Mortar used in brick masonry should be of good quality.
 In walls greater than 9” or 0.225 m width hearting joints
should be filled properly.
 Brick bats are avoided.

48
49
50
51
 10.TECHNIQUES TO
MAKE A BOND BETWEEN
OLD AND NEW MASONRY

52
RACKING

53
TOOTHING

54
11.DEFECTS AND MAINTENANCE
OF BRICK MASONRY
DEFECTS
 Due to Substandard materials
 Due to effect of sulphates
 Due to frost action
 Due to efflorescence

MAINTENANCE
 Cleaning brick masonry
 Removing efflorescence
 Re-conditioning the brick masonry
 Repainting the brick masonry

55
STONE MASONRY

56
DEFINITIONS
 Corbel
 Cornice
 Drip Stone
 Throating
 Coping
 Frieze
 Spalls

57
DEFINITIONS
 Corbel (Bracket)
 Itis a piece of stone projected outside of a wall
to provide support to a structural member of the
Roof or Floor.
 Cornice

 It’s
a large course of stone masonry provided at
the ceiling level of roof, projected outside of wall.
 Drip Stone
A projected stone with toothing at undersurface.
It is provided to through the rain water off the
wall.

58
DEFINITIONS
 Throating
 The process of cutting groves in
 Soffits of sills
 Drip stones
 Coping
 String course etc.
 Its purpose is to avoid the dripping of rain water over
the walls.
 Coping
 It is a special course provided at the top of a wall to
avoid entry of rain water in wall.
 Frieze
 The stone course provided below the cornice is
called frieze

59
60
BLOCK MASONRY

61
62
THE END

63