Scribd
Upload
100 views3 pages

Appendix Field Manual For Concrete Anchoring

This document provides required load values for proof tests and field tests of structural anchoring systems, including adhesive anchors and mechanical anchors. It lists the minimum required loads for various diameters and materials, such as rebar and bolts, for proof tests at 125% of yield strength and field tests at 90% and 70% of yield strength. It also includes forms for recording the results of mechanical and adhesive anchoring system proof tests.

Uploaded by

Zed Baladraf
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100 views3 pages

Appendix Field Manual For Concrete Anchoring

This document provides required load values for proof tests and field tests of structural anchoring systems, including adhesive anchors and mechanical anchors. It lists the minimum required loads for various diameters and materials, such as rebar and bolts, for proof tests at 125% of yield strength and field tests at 90% and 70% of yield strength. It also includes forms for recording the results of mechanical and adhesive anchoring system proof tests.

Uploaded by

Zed Baladraf
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Appendix A: Required Loads for Proof Tests and

Field Tests of Structural Anchoring Systems


Required loads1 for proof tests and field test of adhesive anchors
Yield Required load (lb)
Diam/ Area
Material stress, Proof test Field test Field test
size (in2)
Fy (ksi) (125% Fy) (90% Fy) (70% Fy)2
Grade 60 rebar #3 0.11 60 8,300 5,900
Grade 60 rebar #4 0.20 60 15,000 10,800
Grade 60 rebar #5 0.31 60 23,300 16,700
Grade 60 rebar #6 0.44 60 33,000 23,800
Grade 60 rebar #7 0.60 60 45,000 32,400
Grade 60 rebar #8 0.79 60 59,300 42,700
Grade 60 rebar #9 1.00 60 75,000 54,000
Grade 60 rebar #10 1.27 60 95,300 68,600
Grade 60 rebar #11 1.56 60 117,000 84,200

A307 bolt/threaded rod 3/8” 0.078 36 3,500 2,500 1,970


A307 bolt/threaded rod 1/2” 0.142 36 6,400 4,600 3,600
A307 bolt/threaded rod 5/8” 0.226 36 10,200 7,300 5,700
A307 bolt/threaded rod 3/4” 0.334 36 15,000 10,800 8,400
A307 bolt/threaded rod 7/8” 0.462 36 20,800 15,000 11,600
A307 bolt/threaded rod 1” 0.606 36 27,300 19,600 15,300
A307 bolt/threaded rod 1-1/8” 0.763 36 34,300 24,700 19,200

Required loads1 for proof tests and field tests of mechanical anchors
Load (lb)
Diameter 3 Field test
Proof test
(50% of proof test)
3/8” 3,500 1,750
1/2” 6,400 3,200
5/8” 10,200 5,100
3/4” 15,000 7,500
7/8” 20,800 10,400

NOTES:
1. Proof tests of adhesive anchors, field tests of adhesive anchors, and field tests of mechanical anchors are
required to meet the specified load with less than or equal to 1/16 inch of slip. Sections 712.03 J-K of 2012
MDOT Standard Specifications for Construction.
2. 70% Fy field tests to be used with Bridge Sign Connection Types A1, A2, and B, in accordance with MDOT
Standard Plan SIGN-800-A.
3. There are no mechanical anchors over 3/4” in diameter currently approved for use.

38 Field Manual for Concrete Anchoring


Appendix C: MDOT Form 1927
(Mechanical Anchoring System Proof Test)
Michigan Department ADHESIVE ANCHORING SYSTEM PROOF TEST
Michigan Department
Of Transportation
Of Transportation
1928 (01/15)
MECHANICAL ANCHORING SYSTEM PROOF TEST
1927 (01/15)

CONTROL SECTION JOB NUMBER REPORT NUMBER


CONTROL SECTION JOB NUMBER REPORT NUMBER
CONTRACTOR JOB/STRUCTURE DESCRIPTION
CONTRACTOR JOB/STRUCTURE DESCRIPTION

ADHESIVE PRODUCT EMBEDMENT DEPTH DIAMETER/SIZE

ANCHOR TYPE EMBEDMENT DEPTH DIAMETER


INSTALLED BY TIME INSTALLED DATE INSTALLED

INSTALLED BY DATE INSTALLED REQUIRED PROOF LOAD


TESTED BY TIME TESTED DATE TESTED

TESTED
TEMP.BY
AT INSTALLATION DATE
TEMP.TESTED
AT TESTING REQUIRED PROOF LOAD

HYDRAULIC PUMP/RAM
HYDRAULIC NUMBER
PUMP/RAM NUMBER

DISPLACEMENT (in)
DISPLACEMENT (in) NOTE: MAX ALLOW. = 1/16 (0.0625)
GAGE
GAGE LOAD
LOAD
PRESSURE
PRESSURE TEST NO.
TEST NO.11 TEST
TESTNO.
NO.2 2 TEST NO.NO.
TEST 3 3 TEST NO. 4NO. 4
TEST
(lbs)
(lbs)
(psi)
(psi)
0
0
500
500
1000
1000
1500
1500
2000
2000
2500
2500
3000
3000
3500
3500
4000
4000
4500
4500
5000
5500
5000
6000
5500
6500
6000
7000
6500
7500
7000
8000
7500
PASS/FAIL
8000
COMMENTS
PASS/FAIL
COMMENTS

Clear Form
Prepared by:
MDOT Graphics/Bureaus/Statewide Services/Construction/C&T/Field Manual for Pile Welding/ Field Manual for Concrete Anchoring (kh 5/15)
Clear Form
40 Field Manual for Concrete Anchoring
Appendix B: MDOT Form 1928
(Adhesive Anchoring System Proof Test)
Michigan
Michigan Department
Department ADHESIVE ANCHORING
ADHESIVE ANCHORINGSYSTEM
SYSTEMPROOF
PROOFTEST
TEST
OfOf Transportation
Transportation
1928(01/15)
1928 (01/15)

CONTROL SECTION JOB NUMBER REPORT NUMBER


CONTROL SECTION JOB NUMBER REPORT NUMBER

CONTRACTOR JOB/STRUCTURE DESCRIPTION


CONTRACTOR JOB/STRUCTURE DESCRIPTION

ADHESIVE PRODUCT EMBEDMENT DEPTH DIAMETER/SIZE


ADHESIVE PRODUCT EMBEDMENT DEPTH DIAMETER/SIZE
INSTALLED BY TIME INSTALLED DATE INSTALLED
INSTALLED BY TIME INSTALLED DATE INSTALLED
TESTED BY TIME TESTED DATE TESTED
TESTED BY TIME TESTED DATE TESTED
TEMP. AT INSTALLATION TEMP. AT TESTING REQUIRED PROOF LOAD
TEMP. AT INSTALLATION TEMP. AT TESTING REQUIRED PROOF LOAD
HYDRAULIC PUMP/RAM NUMBER
HYDRAULIC PUMP/RAM NUMBER

DISPLACEMENT (in) NOTE: MAX ALLOW. = 1/16 (0.0625)


GAGE
LOAD DISPLACEMENT (in) NOTE: MAX ALLOW. = 1/16 (0.0625)
PRESSURE TEST NO. 1 TEST NO. 2 TEST NO. 3 TEST NO. 4
GAGE (lbs)
(psi) LOAD
PRESSURE TEST NO. 1 TEST NO. 2 TEST NO. 3 TEST NO. 4
0 (lbs)
(psi)
500
0
1000
500
1500
1000
2000
1500
2500
2000
3000
2500
3500
3000
4000
3500
4500
4000
5000
4500
5500
5000
6000
5500
6500
6000
7000
7500
6500
8000
7000
7500 PASS/FAIL
COMMENTS
8000
PASS/FAIL
COMMENTS

Clear Form

Clear Form 39
Field Manual for Concrete Anchoring

You might also like