Scribd
Upload
994 views6 pages

COLUMN DESIGN (Uniaxial and Bi Axial)

The document summarizes the design of a column subjected to uni-axial bending. It involves calculating load and moment parameters, determining reinforcement ratio, calculating steel area required, and checking design against biaxial bending. The column is designed for an axial load of 576 kN, moment of 85 kN-m, and reinforcement ratio of 1.6%. The required steel area is calculated as 1840 mm^2 using 4 numbers of 16 mm bars.

Uploaded by

Srishti Project Consultants
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
994 views6 pages

COLUMN DESIGN (Uniaxial and Bi Axial)

The document summarizes the design of a column subjected to uni-axial bending. It involves calculating load and moment parameters, determining reinforcement ratio, calculating steel area required, and checking design against biaxial bending. The column is designed for an axial load of 576 kN, moment of 85 kN-m, and reinforcement ratio of 1.6%. The required steel area is calculated as 1840 mm^2 using 4 numbers of 16 mm bars.

Uploaded by

Srishti Project Consultants
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

DESIGN OF COLUMN WITH UNI-AXIAL BENDING

step 1:
AXIAL LOAD(P) 576 kN fck
fy
MOMENT 85 kN-m b
D
factored load 864 kN clear cover
d!/D
factored moment 127.5 kN-m

step2: d!/D adoptd


calculation of the non dimenisonal parameters

pu/fck bd 0.3756521739 from sp-16 chart 43-46


p/fck 0.08
Mu/fckbd^2 0.1108695652

percentage of reinf.. 1.6

step3

Asc required 1840 mm^2

provide 25 mm dia bars

no.of bars 3.7503184713

step 4
design of lateral ties
20
500
230
500
30
0.06

0.1
DESIGN OF COLUMN WITH UNI-AXIAL BENDING

step 1:
AXIAL LOAD(P)

MOMENT (Mx)
MOMENT (My)
factored load

factored moment(Mx)
factored moment(My)

step2:

equivalent bending moment

M=1.15*sqrt(Mx^2+My^2)

Mu 150.6291493

pu/fckbd 0.375
Mu/fckbd^2 0.130981869

percentage of reinforcement 1.6

step3 calculation of area of steel bars

Asc=pbD/100 1840

4 nos of 16 mm bar 803.84

step4 check for the safety against biaxial bending

Mux1/fckbD^2 0.130981869
Mux1 150.6291493

Muy1/fckD*b^2 0.130981869
Muy1 69.28940869
Puz=0.45*fck*Ac+0.75*fy*Asc

puz 1708.44

pu/puz 0.504846527

alpha n 1.508077544

interacation eqn check 1.00097061538261 revise the design


575 kN fck 20
fy 500
85 kN-m b 230 300
20 kN-m D 500
862.5 kN clear cover 30
d!/D 0.06
127.5 kN-m
30 kN-m
d!/D adopt 0.1

25.975
38.9625

KN-m from sp-16 charts

p/fck 0.08

mm^2

p/fck 0.03495

kN-m Mux/Mux1 0.84645

kN-m muy/muy1 0.37


from chart 64

as alpha varies linearly from 1 to 2 for pu/puz values of 0.2-0.8

vise the design

You might also like