Scribd
Upload
72 views2 pages

Inspection & Testing Requirements Scope:: Test and Inspection Per

This document outlines inspection and testing requirements for fiberglass pipes and fittings to be used for gravity flow according to Saudi Aramco specification 01-SAMSS-029. It lists pre-fabrication, in-process, and final inspection and test requirements that must be met which include things like material certification, visual inspection, dimension checks, pressure testing, and providing certificates of compliance. The requirements reference applicable standards like ASTM and AWWA.

Uploaded by

Ali Raza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
72 views2 pages

Inspection & Testing Requirements Scope:: Test and Inspection Per

This document outlines inspection and testing requirements for fiberglass pipes and fittings to be used for gravity flow according to Saudi Aramco specification 01-SAMSS-029. It lists pre-fabrication, in-process, and final inspection and test requirements that must be met which include things like material certification, visual inspection, dimension checks, pressure testing, and providing certificates of compliance. The requirements reference applicable standards like ASTM and AWWA.

Uploaded by

Ali Raza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

INSPECTION & TESTING REQUIREMENTS REVISION: 11/02/2016 CODE NUMBER: PAGE:

SAUDI ARAMCO FORM-175 REPLACES: 12/29/2014 IR012400 1 of 2


SCOPE: RTR (FIBERGLASS) PIPES & FITTINGS FOR GRAVITY FLOW

TEST AND INSPECTION PER: 01-SAMSS-029, AS NOTED BELOW.

(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE


(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0010
0010
***
H X
Pre-Fabrication/Production Requirements
Pre Inspection Meeting
Specification Details / Notes:

0020 R X Cell Classification Per 01-SAMSS-029 & ASTM D 3262 (Table1)

0030 R X Certified Drawings Per 01-SAMSS-029(Table 2)

0040 R X Inspection and test plan

0050 R X Saudi Aramco-Approved Repair Procedure Per 01-SAMSS-029

0060 R X Raw Material certificate Per 01-SAMSS-029

0070 R Design Type Tests: Witnessed and certified by independent agency.

0080 R Pipe Stiffness Test Per 01-SAMSS-029 (For manufacture qualification)

0090 R Chemical Resistance Test Per 01-SAMSS-029 & ASTM D 3262

0100 R Long-Term Ring Bending Strength Per 01-SAMSS-029

0110 R Flange Ratings Per 01-SAMSS-029 & ASTM D 4024

0120 R Joint Integrity Test Per 01-SAMSS-029 & ASTM D 3262

0130 R Beam Strength Test Per 01-SAMSS-029

0020
0010
***
W
In process inspection & test requirement
Pipe Stiffness Test
Specification Details / Notes:
Per 01-SAMSS-029, ASTM D 2412 & AWWA C 950

IR012400 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 11/02/2016 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 12/29/2014 IR012400 2 of 2
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0020 H Visual Inspection Per 01-SAMSS-029 (Table 1) & ASTM D 2563

0030 H Dimensional Inspection Per 01-SAMSS-029 & ASTM D 3567

0040 H Hydrostatic Leak Test Per 01-SAMSS-029 & AWWA C950

0030
0010
***
H
Final inspection & test requirements
Visual/Dimension check
Specification Details / Notes:
Per 01-SAMSS-029, to include loose fittings, flanges, and
adhesive kits as applicable

0020 W Inspecting marking Per 01-SAMSS-029

0030 W X Final material certificates/ documentation Per 01-SAMSS-029(Table 2)

0040 W Packing and preparation for shipment Per 01-SAMSS-029

0050 R X Product test certificates

0060 R X Certificate of compliance

Notes:
(1) Refer detailed instruction sheet SA175 form IR000003 of inspection requirement for ideal use of this form.

End of IR012400

You might also like