Part List, Form No.

100621, Back sheet 1 of 6

Item Part No. Item Part No.

No. No. Req'd Description No. No. Req'd Description
1 303474 1 Copper Tubing 9 250804 6 90° Elbow Fitting
2 17636 1 90° Elbow Fitting 10 350244 1 Air Valve Manifold
3 17565 1 Air Valve 11 10006 1 Soc. Hd. Cap Screw
4 16494 1 Straight Nipple Fitting (1/4-20 X 5/8 Lg.)
5 14281 .8 ft. Plastic Tubing 12 64364BK2 1 Reservoir
6 10623 1 Tee Fitting 13 *51159 1 Air Motor Ass’y (Prior to 5-1-91;
7 12328 1 Straight Fitting (NOTE: Install Keyed shaft; See back sheet 2 of 5)
#12328 Ftting into #10623 Tee Fitting. 14 17634 1 Straight Fitting
Install 1/4 NPTF end of #12328 into 15 11967 1 Plastic Cup
Port No. 3 of #306033 Air Valve.) 16 251797 1 Quick Coupler
8 10020 2 Cap Screw (1/4-20 X 1-1/4 Lg.) 17 19463 1 Tee Fitting
*Note: For air motor repair kit, order no. 252100.

PRESSURE CONTROL VALVE

NOTE: Set at 1500/1700 PSI

Item Part No.

No. No. Req'd Description
1 15456 1 Nipple Fitting
2 18841 1 Straight Fitting
3 21278-15 1 Relief Valve Ass’y

HAND CONTROL ASSEMBLY

Item Part No.
No. No. Req'd Description
1 206105 2 Push Button
2 11033 2 Retaining Ring
3 206104 2 Valve Cartridge (Including seals)
4 203769 2 Decal (Stop)
5 421265 1 Control Valve Body (Includes
decals [Items 4 & 6])
6 203770 1 Decal (Run)
Parts List Form No. 100621

GENERAL ASS'Y TOP VIEW

12
13

14
15
1 16

2
3
4
5 17
6
7 18

22
21 19
8 9 10 11

20

23

Item Part No. Item Part No.

No. No. Req'd Description No. No. Req'd Description
1 351076 1 Tee Assembly 13 15883 2.8ft. Plastic Tubing
2 66209 1 Valve (See Form No. 108100) 14 212897 1 90 °Elbow Fitting
3 10412 1 Screw (3/8-16 UNC x 1/2 Lg.) 15 306033 1 Air Valve
4 19779 1 Seal Washer 16 15457 2 90° Elbow Fitting
5 252653 1 90° Elbow Fitting 17 420096 1 Hose Assembly (25' Lg.)
6 350431 1 Oil Level / Thermometer Gauge 18 208218 6 Straight Fitting
7 212304 1 Plastic Cap 19 212896 1 Grommet
8 10575 4 Drive Screw 20 46626 1 Heat Exchanger Coil
9 10177 9 Screw (1/4-10 X 7/8 Lg.) 21 251796 1 Jam Nut
10 212898 .9ft. Pressure Hose 22 251795 1 Straight Fitting
11 12367 2 Hose Clamp 23 421265 1 Air Operated Hand Control
12 251053 1 Straight Fitting (See back sheet 1 of 5)

Sheet No. 2 of 5

Rev. 6 Date: 21 July 2000

Parts List, Form No. 100621, Back sheet 2 of 5

AIR MOTOR ASSEMBLY

Item Part No. Item Part No.

No. No. Req'd Description No. No. Req'd Description
1 10014 1 Cap Screw (1/4-28 X 1” Lg.) 12 10008 4 Cap Screw (1/4-20 X 3/4 Lg.)
2 10174 2 Machine Screw (1/4-20 X 1/2 Lg.) 13 51158WH2 1 Motor Base
3 33808 2 Handle Bracket 14 *14717 1 Air Motor (See Form #16138)
4 12719 20 Washer 15 10018 3 Cap Screw (1/4-28 X 1-1/4 Lg.)
8 17816 4 Cap Screw (3/8-16 X 3” Lg.) 16 28158 1 Handle
9 37842 1 Shaft Extension 51159 1 Complete Air Motor Ass’y
10 10556 1 Set Screw (1/4-20 UNC X 1/4 Lg.) (Includes Items 1 through 16)
11 30650 1 Gasket
*Note: For air motor repair kit, order no. 252100.
Parts List Form No. 100621

GENERAL PUMP ASSEMBLY

Sheet No. 3 of 5

Rev. 6 Date: 21 July 2000

Parts List, Form No. 100621, Back sheet 3 of 5

Item Part No. Item Part No.

No. No. Req’d Description No. No. Req’d Description
1 10016 3 Cap Screw (1/4-20 X 1” Lg.) 12 20770 1 Connector (Torque to 40/45 in. lbs.)
2 ----- 1 Basic Pump Assembly 13 10015 2 Cap Screw (1/4-28 X 1” Lg.;
(Includes all items on sheet 4 of 5 and Torque to 180 in. lbs.)
items 1, 7, 8, 9,10, 11, 12, 13, 15 & 22 14 21278 1 Relief Valve (Set at
on this sheet) 10,100/10,700 PSI)
3 20937 1 Vent Cap 15 10266 1 O-ring (1/4 X 3/8 X 1/16)
4 46627WH2 1 Cover 16 10268 1 O-ring (1/2 X 3/8 X 1/16)
5 40164 1 Gasket 17 11863 2 Teflon Backup Washer
6 47647 1 External Pressure Regulator 18 20787 1 Valve Connector
(See below) 19 10430 2 Tube Sleeve
7 16177 1 90° Elbow Fitting 20 10431 2 Tube Nut
8 20776 1 Valve Body 21 21045 1 Oil LIne
9 20771 1 Poppet 22 21345 1 Filter Ass’y (Includes Item #23)
10 10425 1 Comp. Spring (3/8 O.D. X 3/4 Lg.) 23 10527 1 O-ring (13/16 X .644 X .087)
11 10261 1 Copper Washer 24 201570 1 Oil Line Tube
(3/4 X 19/32 X 1/32) 25 14844 1 Straight Fitting

PRESSURE REGULATOR ASSEMBLY

NOTE: Set at 10,100/10,700 PSI

14 13 12 2

11 3
COVER PLATE
10

5
9
8
6

7
Item Part No. Item Part No.
No. No. Req’d Description No. No. Req’d Description
1 215693 1 Knob 9 309079 1 Poppet
2 215721 1 Adjustment Stem (Assemble to 10 215428 2 Spring Retainer (Grease pocket
knob with Loctite No. 242 or equiv.) [both ends] before assembly)
3 10396 1 Jam Nut 11 215431 1 Spring (Assemble closed coils of
4 309077 1 Regulator Housing spring form towards seat fitting
5 215429 1 Compression Spring [Item #7])
(1.100 O.D. X 2-1/2 Lg.)
12 21583 1 Locknut
6 47648 1 Regulator Body 13 215430 2 Backup Washer
7 309078 1 Seat Fitting 14 10266 1 O-ring (3/8 X 1/4 X 1/16)
8 13755 1 O-ring (.558 x .414 x .072)
Parts List Form No. 100621

BASIC PUMP ASS'Y

Sheet No. 4 of 5

Rev. 6 Date: 21 July 2000

Parts List, Form No. 100621, Back sheet 4 of 5
Item Part No.
No. No. Req'd Description
1 10020 9 Soc. Hd. Cap Screw
(1/4-20 X 1-1/4 Lg.; Torque to 170-180 in. lbs.)
2 33113 1 High Pressure Pump Ass’y (See back sheet 5 of 5)
3 10361 1 Compression Spring (1/4 O.D. X 1” Lg.)
4 10375 1 Steel Ball (1/4 Dia.)
5 23547 1 Bearing Top Plate
6 23548 1 Top Plate
7 11228 2 Thrust Bearing
8 11813 3 Bearing Race
9 11814 1 Ball Bearing
10 23549 1 Angle Plate
11 11955 1 Roll Pin (1/4 Dia. X 3/4 Lg.)
12 11064 2 Needle Bearing
13 11261 2 Retaining Ring (1-1/8 Shaft)
14 23556 1 Shaft
15 11821 1 Woodruff Key
16 23557 1 Gear
17 30533 1 Pump End Plate
18 10001 12 Soc. Hd. Cap Screw (10-32 X 1-3/4 Lg.; Torque to 50 in. lbs.)
19 21091 1 Aluminum Coupling
20 11199 2 Needle Thrust Bearing (See diagram below)
23 10266 1 O-ring (1/4 X 3/8 X 1/16)
24 21272 1 Drive Gear
25 10303 1 O-ring (7/8 X 3/4 X 1/16)
26 10425 2 Compression Spring (3/8 O.D. X 3/4 Lg.)
27 20771 2 Poppet
28 40120 1 Pump Body
29 10427 1 Pipe Plug (1/8 NPTF)
30 10271 1 O-ring (11/16 x 1/2 X 3/32)
31 12389 1 Teflon Backup Washer (11/16 X 1/2 X 1/16)
32 20849 1 Spool
33 23255 1 Spring Guide
34 10426 1 Compression Spring (1” O.D. X 1-13/16 Lg.)
35 23256 1 Spring Guide

NEEDLE BEARING INSTALLATION

SPECIFICATIONS
.065
.075

.065
.075

When replacing the needle bearings on

the drive gear of the basic pump, the
dimensions shown must be as specified.

Note: Shaded areas reflect last revision(s) made to this form.

Parts List Form No. 100621

HIGH PRESSURE PUMP ASSEMBLY

Sheet No. 5 of 5

Rev. 6 Date: 21 July 2000

Parts List, Form No. 100621, Back sheet 5 of 5

#33113 HIGH PRESSURE PUMP ASS'Y

(3 Pistons - 9/32 Dia.)

Item Part No.

No. No. Req'd Description
1 10442 1 Copper Washer (3/8 X 1/4 X 1/32)
2 10002 1 Soc. Hd. Cap Screw
(1/4-20 NC X 3/8 Lg.; Torque to 140/160 in. lbs.)
3 *24549 6 Valve Guide
4 *10445 6 Compression Spring (.164 O.D. X .718 Lg.)
5 *12223 7 Steel Ball (3/16 Dia.)
6 *10023 7 Soc. Hd. Cap Screw
(1/4-28 NF X 1-1/2 Lg.; Torque to 170/180 in. lbs.)
7 *50411 1 Top Plate (Aluminum)
8 10519 1 Soc. Set Screw (1/4-20 NC X 3/8 Lg.; Torque to 65/70 in. lbs.)
9 *40630 1 Valve Head
10 *41062 1 Pump Barrel
11 *21628 3 Piston

Consult factory when replacing items marked with an asterisk (*).

BOLT TIGHTENING SEQUENCE

NOTE: Assemble in sequence shown.

Lubricate under head and on
threads. Torque to 180 in. lbs.

Refer to any operating instructions included with this product for detailed information about operation,
testing, disassembly, reassembly, and preventive maintenance.

Items found in this parts list have been carefully tested and selected. Therefore: Use only genuine
Power Team replacement parts!

Additional questions can be directed to our Technical Services Department.

Note: Shaded areas reflect last revision(s) made to this form.