Scribd
Upload
12K views5 pages

BMW Coding Parameters - F56 - For MINI Cooper and Cooper S

This document provides coding instructions for various BMW modules to modify vehicle settings and behaviors. Some examples include disabling seatbelt chimes, starting the car without pressing the clutch or brake, increasing angel eyes brightness, and enabling developer menus. The document contains specific module names, coding paths, and value changes needed to implement each modification.

Uploaded by

kenjyaitc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
12K views5 pages

BMW Coding Parameters - F56 - For MINI Cooper and Cooper S

This document provides coding instructions for various BMW modules to modify vehicle settings and behaviors. Some examples include disabling seatbelt chimes, starting the car without pressing the clutch or brake, increasing angel eyes brightness, and enabling developer menus. The document contains specific module names, coding paths, and value changes needed to implement each modification.

Uploaded by

kenjyaitc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Re-Code for Enhanced Bluetooth:

Change FA (VO) to Remove 6NH from VO & Add 6NS to VO


VO Code HU_ENTRY & CMB_MEDIA (or just HU-NBT)
Read FA(VO)Activate FA(VO)Read SVTRight-Click ECU & Select Code

Now Proceed to code HU_ENTRY & CMB_MEDIA (or just HU_NBT) Modules … or re-code if coding was already
present

IF YOU NEED TO DO THE ABOVE … FOLLOW THE INSTRUCTIONS FOR “HOW TO CHANGE
FA” in my BMW Coding Beginner’s Guide. This needs to be done FIRST … meaning before
you perform FDL Coding or Changing Werte Values

ACSM:

Disable Welcome 3 Gongs:


3000  Initialwarnung = nicht_aktiv

SeatBelt Reminder Lights OFF: set all to nicht_aktiv – werte=00


3000Gurtzustandsanzeige_Beifahrer
3000Gurtzustandsanzeige_Fahrer

Turn Off Seat-Belt Reminder Chimes:


3000  SeatBeltReminder_Fahrer = nicht_aktiv
3000  SeatBeltReminder_Beifahrer = nicht_aktiv

ASD Module:

Disable Active Sound Design


3000 Model Range  set to: F021

BDC:

Start Car by pushing button (hold clutch/brake not needed)


3020TCM_STARTLOCK_BRAKE set to: nicht_aktiv
3020TCM_STARTLOCK_CLUTCH set to: nicht_aktiv
3020TCM_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv

Increase Angel Eyes Brightness to 100%


3062  MAPPING_STANDL_V_L_PWM_LEVEL_1 = 100%
3062  MAPPING_STANDL_V_R_PWM_LEVEL_1 = 100%
3062  MAPPING_PARKL_V_L_PWM_1_LEFT = 100%
3062  MAPPING_PARKL_V_L_PWM_2_RIGHT = 100%

Close windows, sunroof & mirror from key fob:


3056  KOMFORTSCHLIESSUNG_FB = aktiv 00 (Comfort Access ONLY)
3056  KOMFORT_SCHLIESSEN  WERTE = 00 (Mirror Fold Delay = 0 sec delay)
3110  ASP_BEIKLAPPEN = aktiv (werte=01)
3110  ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN = (werte=01)
3110  ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN = (werte=01)
Change Mirror Un-Fold Automatically at XX Speed (Binary value in Werte):
3110  ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN  werte=14 (12Mph)

Turn off MMI when door is opened:


3020  TCM_LOGIC_R_OFF_DOOR = aktiv 01

Auto Start/Stop Default OFF:


3023  TCM_MSA_DEFAULT_OFF = aktiv 01

Auto Start/Stop Remember Last Setting:


3023  TCM_MSA_MEMORY = aktiv 01

Unlock Door on Engine OFF (1 pull):


3040  VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK = aktiv 01

Turn off window roll-up door interrupt:


3050  FH_TUERAUF_STOP_MAUT

Change Triple-Blink Count to another Value:


3068  BLINKZYKLEN_ANZAHL_TIPP – Werte = # blinks-1 (4 blinks = werte=3)

Turn on Brake Force Flashing with Hard Braking:


3068  ESS_AKTIVIERBARER_AUSGANG = bremsclicht blinkend

Turn off Amber Side Markers next to Headlight:


3063  MAPPING_SIDEMARKER_L_OUTPUT = OFF
3063  MAPPING_SIDEMARKER_R_OUTPUT = OFF

Tilt Passenger Mirror farther down when in reverse


3110ASP_BORDSTEINAUTOMATIK_DELTA set to: werte=4B

Ambiance Lighting controlled independent from Dimmer Switch


3070  AMBIENTE_NACHFUEHRUNG set to: nicht_aktiv

Enable Illumination of Exterior Door Handle LEDs when in Reverse


3070OVT_BEI_REUCKFAHRLICHT set to: aktiv

Turn on Fog Lights with Welcome Lights:


3063  MAPPING_NEBELSCHW_L_PART_OF_WL = hard on
3063  MAPPING_NEBELSCHW_R_PART_OF_WL = hard on

Activate Rear Fog Lights: (In conjunction with REM Module coding)
3068 NSL_Verbaut = Verbaut

Disable Headlight Washers


3080  WW_SCHEINWERFERREININUNG set to: nicht_aktiv

Turn On Tail Lights with DRLs:


3062  MAPPING_TAGFAHRL_H_L_OUTPUT = sl_l
3062  MAPPING_TAGFAHRL_H_R_OUTPUT = sl_r
3062  MAPPING_TAGAHRL_H2_L_OUTPUT = sl_2_l
3062  MAPPING_TAGAHRL_H2_R_OUTPUT = sl_2_r
Activate Rear Fog Lights feature for lighting switch:
3063 Mapping_Nebelschlussl_L_output = nsl_l
3063 Mapping_Nebelschlussl_L_Function = nebelschlusslicht
3063 Mapping_Nebelschlussl_R_output = nsl_l
3063 Mapping_Nebelschlussl_R_Function = nebelschlusslicht
Auto Light Sensitivity Increase
3130RLS_DEF_FLC_SCHWELLWERT_SATZ set to: option below
3130RLS_FLC_SCHWELLWERT_SATZ set to: option below
Options:
normal = mornal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive

HU_NBT:

Set cell phone ringer as primary


3003INBAND_RINGING set to: aktiv – werte=01

Disable Auto-Locking of Doors once begin driving


3000DOOR_LOCK_AFTER_DRIVING_AWAY set to: nicht_aktiv

Disable Active Sound Design


3000  ASD_SOUND_OFF set to: aktiv

Enable Active Sound Design Configuration Menu


3000  ASD_CONFIGURATION set to: aktiv
3000  ASD_SOUND_4 set to: aktiv

DVD-in-Motion activated:
3000  SPEEDLOCK_X_KMH_MAX werte = FF
3000  SPEEDLOCK_X_KMH_MIN werte = FF
3000  VIDEO_HANDBRAKE set to: nicht_aktiv
3000  VIDEO_FRONT_LOCKED set to: nicht_aktiv
3000  VIDEO_SPEEDLOCK_CONDITION set to: none=00

Allow unit change for Sport Display:


3000  EFF_DYN_SPORT_UNIT = aktiv 01

Enable Sport Displays (Power/Torque) & Unit Changing (kW/nM)


3000  EFF_DYN_SPORT_CID set to: aktiv
3000  EFF_DYN_SPORT_UNIT set to: aktiv

Enable Turn Signals in HUD


3001HUD_TURNSIGNAL set to: aktiv

Change Navi Voice to British English


3000LANGUAGE_ENGLISH_UK set to: master
3000LANGUAGE_ENGLISH_US set to: nicht_aktiv

Navi Trip-Import
3000NAVI_TRIP_IMPORT set to: aktiv
Remove Legal Disclaimers:
3001  LEGAL_DISCLAIMER_TIME = kein_ld
3001  MACRO_CAM_LEGALDISCLAIMER = kein_ld

Display Tire Pressure & Temperaure in Vehicle Info:


3001  RDC_SAFETY = aktiv 01

Enable Video Files from USB


3000 ENT_CODEC_XVID set to: aktiv
3000 ENT_CODEC_XVCD set to: aktiv
3000 API_USB_VIDEO set to: both

Enable the function of saving video files to NBT Hard Drive for play later
3000  ENT_MC_VIDEO_SUPPORT set to: aktiv

Disable Office Function Speed Lock-Out


3000 OFFICE_MESSAGES_SPEEDLOCK_CONDITION set to: nicht_aktiv

Enable Full Text Lines in Office While Driving


3003  PIM_DRIVING_TEXT_LENGTH set to: whole text_07

Disable Audible Chirp/Beep When Locking Car


3000  ACOUSTICAL_LOCK_CONFIRM set to: nicht_aktiv

Enable Speeach Input for E-Mail or SMS


3003  SPEECH_2_TEXT set to: aktiv

Enable Time-Stamp Display for Call Log


3003  TIMESTAMP_DISPLAY set to: aktiv

Add GPS Current Location to Navi Menu Items


3000NAVI_POSITION_MENU set to: aktiv

Enable IPCE Web Server @ 172.16.222.1


3000IPCE_WEBSERVER set to: aktiv

Enable WiFi Hot-Spot


(Need to install a DLNA/UPnP media sharing server on your laptop or phone to be able to use this)
3000ENT_MC_WLAN_STREAM_DMP_COVERART set to: aktiv
3000ENT_MC_WLAN_STREAM_DMP_VIDEO set to: aktiv
3000ENT_MC_WLAN_STREAM_DMP set to: aktiv
3003WLAN_STATUS set to: aktiv
3003WLAN_MODUS set to: ap
3003WLAN_SIGNAL_STRENGTH set to: outdoor
3003WLAN_CHANNEL set to: channel_1 -14

Enable Developer Menu


3000  ENTWICKLER_MENUE set to: aktiv 01

IHKA Module:

A/C System Remembers Last Setting


3003MEMORY_OFF set to aktiv-werte=01
Always Remember Air ReCirculating
3003MEMORY_UMLUFT set to: aktiv

KOMBI:

Add Digital Speed to SpeedoLCD Display via BC button:


3000  BC_DIGITAL_V = aktiv 01

Set Clock via GPS:


3000  GPS_UHR = aktiv 01

Disable HUD Startup Animation


3008HUD_STARTUP_TIME Werte=00

You might also like