Scribd
Upload
44 views1 page

Geotechnical Report

This document provides geotechnical parameters for 5 soil layers between depths of 0-22 meters. It includes information on initial and final elevation, saturated unit weight, average number of blows, grain size, cone resistance, side resistance, and shear wave velocity for each layer. Grain size distribution values of D10, D60 and Uniformity Coefficient are also provided.

Uploaded by

Raja G
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
44 views1 page

Geotechnical Report

This document provides geotechnical parameters for 5 soil layers between depths of 0-22 meters. It includes information on initial and final elevation, saturated unit weight, average number of blows, grain size, cone resistance, side resistance, and shear wave velocity for each layer. Grain size distribution values of D10, D60 and Uniformity Coefficient are also provided.

Uploaded by

Raja G
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

GEOTECHNICAL PARAMETERS

Layer Descript Initial Final Unit Saturate Average D50 Resistan Resistan Shear
Nr ion elevatio elevatio weight d unit number granules ce qc ce to waves
n n (KN/mc weight of (mm) (KPa) side velocity
(m) (m) ) (KN/mc blows friction Vs
) (Nspt) fs (m/s)
(KPa)
1 Fisrt 0 1.5 17.8 18.8 20 0 150 0 100
2 Second 1.5 4 18.2 19 22 0 175 0 90
3 Third 4 10 18 20 17 0 130 0 120
4 Fourth 10 15 19 20 19 0 140 0 110
5 Fifth 15 22 19 20 18 0 130 0 80

Diameter corresponding to the passing of 10% D10 = 1.18mm


Diameter corresponding to the passing of 60% D60 = 0.04mm
Uniformity Coefficient = 31.05

You might also like