COMPANY Job.
Revision
COUNTRY 0
Agip AREA Doc. n°
PLANT
Sheet / of Compiled Date
Dept. /
INSPECTION DATA SHEET (I.D.S.)
Material : WIND ENERGY GENERATION SYSTEM
Tags :
CONCERNED COMPANIES :
A AGIP S SUPPLIER
CERTIFYING AUTHORITIES :
OTHER : OFFICIAL AUTHORITY :
TYPE OF INTERVENTION :
H - BINDING PRESENCE. The cycle continuation is bound to the presence
P - BINDING PRESENCE FOR THE % INDICATED IN THE NOTES.
W - NOT BINDING PRESENCE.In case of unwitnessed test the supplier is autorized
to continue the production cycle, supplying the appropriate documentation.
R - CHECK OF CERTIFICATES AND/OR DOCUMENTS.
C - CHECK CARRIED OUT WITH RELEASE OF THE CERTIFICATE.
N - CHECK CARRIED OUT WITHOUT RELEASE OF THE CERTIFICATE.
D - SIMPLE DOCUMENTATION.
CODES / SPECIFICATIONS / DRAWINGS / REFERENCE STANDARDS :
NOTES :
(1) The dimensions and the masses shall be, the same as those defined by the
Supplier in the Project Specifications, within the tollerance limits specified.
(2) Test carried out at reduced voltage in respect to type test,
in accordance with reference rules.
(3) Verification of the test report carried out in autorized
M laboratories, in accordance to reference rules prescriptions.
O (4) Control of the supplier test certificates for components in plastic
D
. material only.
E
L
E
.
W
E
S
.
0
0
2
/
4
S
h
.
0
1
/
0
0
6 REV. DESCRIPTION PREP'd. CHK'd. APPR'd. DATE
INTERNAL NORMALIZATION This document is Company property. The Company lawfully reserves all rights.
COMPANY Job. Revision
COUNTRY 0
Agip AREA Doc. n°
PLANT
Sheet / of Compiled Date
Dept. /
INSPECTION DATA SHEET (I.D.S.)
FOR WIND ENERGY GENERATION SYSTEM
DESCRIPTION I.D.S. REFERENCE
- WIND GENERATOR Sheet
- FIELDS BOARDS Sheet
- REGULATION AND CONTROL BOARD Sheet
- ACCESSORIES AND MISCELLANEOUS Sheet
M
O
D
.
E
L
E
.
W
E
S
.
0
0
2
/
4
S
h
.
0
2
/
0
6
INTERNAL NORMALIZATION This document is Company property. The Company lawfully reserves all rights.
COMPANY Job. Revision
COUNTRY 0
Agip AREA Doc. n°
PLANT
Sheet / of Compiled Date
Dept. /
INSPECTION DATA SHEET (I.D.S.)
FOR WIND ENERGY GENERATION SYSTEM
MATERIAL : WIND GENERATOR
TAG :
CODE OF
ITEM DESCRIPTION OF CHECKS AND TESTS INTERVENTION REFERENCE
A S
1 TYPE TEST
1.1 - Electrical characteristics measurement
1.2 - Verification of omologation certificate (note 3)
2 ACCEPTANCE INSPECTION
2.1 VISUAL AND DIMENSIONAL CHECKS
2.1.1 - Check of compliance with prototype at position (1)
2.1.2 - Check of dimension and masses (note 1)
2.1.3 - Blade state control
2.1.4 - Connections and termination control in the output j.box
2.1.5 - Frame and sealing control
2.1.6 - Accessories control
2.2 ACCEPTANCE TESTS
2.2.1 - Dielectric tests between terminals (+ , -) and frame
2.2.2 - Electrical characteristics measurement
2.2.3 - By-pass diodes test
2.2.4 - Block diodes test
2.3 MASS CONTROL (WEIGHT) (note 1)
M
O
D
.
E
L
E
.
W
E
S
.
0
0
2
/
4
S
h
.
0
3
/
0
6
INTERNAL NORMALIZATION This document is Company property. The Company lawfully reserves all rights.
COMPANY Job. Revision
COUNTRY 0
Agip AREA Doc. n°
PLANT
Sheet / of Compiled Date
Dept. /
INSPECTION DATA SHEET (I.D.S.)
FOR WIND ENERGY GENERATION SYSTEM
MATERIAL : FIELD BOARDS
TAG :
CODE OF
ITEM DESCRIPTION OF CHECKS AND TESTS INTERVENTION REFERENCE
A S
1 TYPE TEST
- Type test performed according to the reference
1.1
standard
2 ACCEPTANCE INSPECTION
2.1 VISUAL AND DIMENSIONAL CHECKS
2.1.1 - Dimensional checks
2.1.2 - Painting checks
2.1.3 - Impacts resistance control (note 4)
2.1.4 - Check of autoestinguisher material certificate (note 4)
2.1.5 - Protection degree check
2.1.6 - Check of protection against indirect contacts
2.1.7 - Correct components installation control
- Rating plates, wirings, conductors numeration and
2.1.8
terminal strips control
2.1.9 - Block diodes check
2.1.10 - Overvoltage dischargers check
2.2 ACCEPTANCE TESTS
2.2.1 - Dielectric test (note 2)
2.2.2 - Block diodes test
M
O
D 2.2.3 - Functional test
.
E
L 2.3 MASS CONTROL (WEIGHT) (note 1)
E
.
W
E
S
.
0
0
2
/
4
S
h
.
0
4
/
0
6
INTERNAL NORMALIZATION This document is Company property. The Company lawfully reserves all rights.
COMPANY Job. Revision
COUNTRY 0
Agip AREA Doc. n°
PLANT
Sheet / of Compiled Date
Dept. /
INSPECTION DATA SHEET (I.D.S.)
FOR WIND ENERGY GENERATION SYSTEM
MATERIAL : REGULATION AND CONTROL BOARD
TAG :
CODE OF
ITEM DESCRIPTION OF CHECKS AND TESTS INTERVENTION REFERENCE
A S
1 TYPE TEST
1.1 - Electronics regulation units type test
1.2 - Command and protection equipment type test
2 ACCEPTANCE INSPECTION
2.1 VISUAL AND DIMENSIONAL CHECKS
2.1.1 - Equipment, main components and ancillary acceptance
2.1.2 - Dimensional checks
2.1.3 - Nominal data and equipment performances control
2.1.4 - Equipment arrangement control
- Correct components installation, equipment
2.1.5
operability and protection check
2.1.6 - Carpentry, connections and wirings check
2.1.7 - Painting check
2.1.8 - Protection degree control
2.1.9 - Check of protection against indirect contacts
2.1.10 - Rating plates control
2.2 ACCEPTANCE TESTS
2.2.1 - Dielectrical test
M
O
D 2.2.2 - Charge control unit operation test (note 2)
.
E
L 2.2.3 - Alarm logics operation test
E
.
W 2.2.4 - Temperature compensation system operation test
E
S
. 2.2.5 - Output voltage and current measurement
0
0
2 2.3 MASS CONTROL (WEIGHT) (note 1)
/
4
S
h
.
0
5
/
0
6
INTERNAL NORMALIZATION This document is Company property. The Company lawfully reserves all rights.
COMPANY Job. Revision
COUNTRY 0
Agip AREA Doc. n°
PLANT
Sheet / of Compiled Date
Dept. /
INSPECTION DATA SHEET (I.D.S.)
FOR WIND ENERGY GENERATION SYSTEM
MATERIAL : ACCESSORIES AND MISCELLANEOUS
TAG :
CODE OF
ITEM DESCRIPTION OF CHECKS AND TESTS INTERVENTION REFERENCE
A S
1 STRUCTURE
1.1 - Dimensional check
1.2 - Mass control (weight) (note 1)
1.3 - Painting check
1.4 - Accessories check
2 SPARE PARTS
2.1 - Quantity and type check
2.2 - Rating plates control
3 INSPECTION DOCUMENTATION
- Manufacturer shall be supply all documentation about the
3.1 inspection, checks and tests above mentioned (bounded),
according to order and R.D.D.S. for language and
number of copies
M
O
D
.
E
L
E
.
W
E
S
.
0
0
2
/
4
S
h
.
0
6
/
0
6
INTERNAL NORMALIZATION This document is Company property. The Company lawfully reserves all rights.
