0% found this document useful (0 votes)
192 views1 page

Software Update Procedure

This software update for the Simrad E50xx ECDIS/ECS system includes improvements such as allowing the virtual keyboard to be moved around the screen, improved radar overlay presentation, and compliance with S-64 test standards. It also more accurately reflects the "Lost VDR" warning based on the system configuration. The document provides instructions for downloading the update file from a URL, installing it using a USB drive, and verifying the new software version.

Uploaded by

Hamid NA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
192 views1 page

Software Update Procedure

This software update for the Simrad E50xx ECDIS/ECS system includes improvements such as allowing the virtual keyboard to be moved around the screen, improved radar overlay presentation, and compliance with S-64 test standards. It also more accurately reflects the "Lost VDR" warning based on the system configuration. The document provides instructions for downloading the update file from a URL, installing it using a USB drive, and verifying the new software version.

Uploaded by

Hamid NA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Simrad E50xx ECDIS Software Update

Release Date: 11 March 2018


Version: 2.0.1.11498
We are pleased to announce a new software version for the E50xx ECDIS/ECS system.
Improvements

 The virtual keyboard can be moved around the screen 


 Improved radar overlay presentation
 Improved compliance with S-64 test standards
 The "Lost VDR" warning more accurately reflects the system configuration

Procedure to install new software

 Download configuration file from ECDIS to USB


 Download FROM http://downloads.navico-commercial.com/software/index.html?r=1388
 and store the *.upd file to a USB memory stick.
 Remove everything from the USB connections on E50xx
 Insert a USB keyboard and the memory stick containing the *.upd upgrade file.
 Power cycle the device.
 When booting you will get a menu asking if you want to upgrade.
 Use your down arrow key on the keyboard and select "E5000-next-2.0.1.10877-standard-
1.upd" and then press enter.
 When update is done, system will restart. Don’t press anything before you can see ECDIS
running again.
 Then remove all USB devices. And connect the USB trackball/ mouse again.

To verify software version

 Press menu (right top corner)


 Press settings
 Press System
 Press System information

You might also like