Product Data Sheet
Automatic Transmission DM Fluid
Description
CountryMark’s Advantage™ Automatic Transmission DM Fluid is a multi-purpose product for use in GM and
FORD automatic transmissions. It is formulated to meet the viscometrics, friction, wear, and oxidation stability
properties required in passenger car and light truck transmissions.
Features and Benefits
Manufacturer Requirements: Meets pre-2006 GM and FORD vehicle automatic transmission fluid requirements.
It also meets the ALLISON C-4 requirements. It is not recommended for use in applications calling for Dexron
VI, Mercon V, SP and Type F.
High Temperature Performance: Provides excellent oxidation and sludge protection.
Smooth Shifting: Due to its enhanced friction properties, this fluid provides smooth shifting performance
throughout the service interval.
Applications
CountryMark Advantage Automatic Transmission DM Fluid is formulated to meet or exceed a variety of
specifications and requirements by engine manufacturers, including:
• ALLISON: C-3 & C-4
• GM DEXTRON III/II (OBSOLETE)
• FORD MERCON (OBSOLETE)
• CATERPILLAR TO-2
• VOITH G607
• VOLVO S6/66 MANUAL TRANSMISSION
Typical Properties
TEST Advantage
D/M
Viscosity @100˚C D445 7.1
Viscosity Index D2770 191
Pour Point ˚C D97 -40
Color Visual Red
Safety and Health
Caution! Customers are advised to check the oil recommendations for their equipment. Equipment manufacturers
recommend specific viscosity grades of oil for certain ambient temperature ranges. Use of oil outside its
recommended temperature range can cause lubrication-related problems and lead to permanent engine damage.
CountryMark Advantage™ Lubricants
For additional information contact
Phone: 1-800-537-5303
Dennis Mungle (ext: 4355); Doug Baker (ext: 4315); Jeff Inman (ext: 4314)
www.countrymark.com