Scribd
Upload
198 views3 pages

3CH Traffic Light Controller For Manual Programming: Features

This 3-channel traffic light controller can be programmed manually to control traffic lights. It accepts 120-240V AC or up to 30V DC power and provides 10 amps of current per channel to power LEDs, incandescent bulbs, or other lights. The controller has 15 pre-programmed light sequences that can be easily changed using a push button encoder and allows independent control of red, yellow, and green lights with adjustable durations from 0 to 255 seconds depending on the sequence.

Uploaded by

Francisco Granados
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
198 views3 pages

3CH Traffic Light Controller For Manual Programming: Features

This 3-channel traffic light controller can be programmed manually to control traffic lights. It accepts 120-240V AC or up to 30V DC power and provides 10 amps of current per channel to power LEDs, incandescent bulbs, or other lights. The controller has 15 pre-programmed light sequences that can be easily changed using a push button encoder and allows independent control of red, yellow, and green lights with adjustable durations from 0 to 255 seconds depending on the sequence.

Uploaded by

Francisco Granados
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

3CH Traffic Light Controller for Manual Programming

Our 3 Channel Traffic Light Controller is the perfect solution for all of your traffic signal needs.
Accepting standard 120VAC and 240VAC line voltage and DC voltage up to 30VDC, this controller
provides 10 Amps current per channel and will drive full-sized LED’s, incandescent traffic lights (this
includes all household incandescent and LED bulbs) and any other LED strips or DC voltage lamps
and LEDs. This board is based with the electromagnetic relays. Now is very simple to programming
all traffic lights timings. There are 15+ custom sequences packed into our controller, which
are easily changed with the push of an encoder (button).

Features:

- Easy to program mode selection with pushbutton control (encoder).


- 10+ unique light sequence modes including 5+ realistic traffic modes.
- Separate digital control for each of RED, YELLOW and GREEN allows for realistic operation
- User selectable duration from 0 second to 255 seconds (determined by mode).
- Wide input voltage range, accepts from 100 to 240VAC with input fuse protection for board
power supply.
- Universal for 50Hz and 60Hz AC main voltage.
- Highly efficient power conversion draws less than 1W from the logic side.
- Independent relay outputs channels for operating LEDs, incandescent lamps or any other DC
lamp.
- Onboard LEDs to show current output states for easy programming and setup.
- Compatible with all traffic lights & bulbs and DC LED strips / LEDs.

Device specification:

- PCB board dimension – 90mm x 100mm, color green.


- PCB Board Material - 1.6 mm FR-4, with solder mask & silk screen.
- Supply Voltage: 100VAC to 240VAC (50Hz and 60Hz).
- Delay Range: 0 – 255 seconds for each color (RED, YELLOW and GREEN), depends on mode.
- Input Connector - 14-26AWG, 250VAC @ 16A screw terminals.
- Output Connectors - 14-26AWG, 250VAC @ 16A screw terminals.
- Safety fuse - 8A.
- Unit Weight: 100 grams.
Wiring, first option –

Wiring, second option –


Device dimension –

You might also like