Filtration Products

Hydraulic and
lubrication
oil filters
 Eaton combines sales, engineering, Eaton is a leader in manufacturing high quality hydraulic and
lubrication systems, filter media, condition monitoring, and
manufacturing, customer service, and hydraulic and lubrication accessories.
Eaton currently offers a selection of more than 4000 different
technical sales support into one focused filter elements, including corresponding filter housings for
business objective: Provide customers mobile and stationary applications.

with optimum filtration solutions.

The importance of cleanliness Eaton services

Contamination is any solid or liquid substance that is not part In addition to world-proven hydraulic and lubrication filter
of a hydraulic system’s working fluid. There are three principal systems, Eaton provides a full range of services to help you
means through which contamination can occur in a typical maximize the potential of your operation.
hydraulic system: it can be incorporated during system • State-of-the-art testing lab facilities
assembly, generated during system operation, or ingested by
the system during operation. Having a reliable way to manage • Equipment rentals
contamination is vital to your operation. • Calibration services: certifications, software updates,
• Provides maximum efficient productivity test runs
• Reduces equipment downtime • Field service: inspections, start-up, repair, replacement, and
maintenance
• Minimizes safety hazards and prevents contamination-
related failure • Extensive network of sales and service representatives
• Increases the life of system components, improves • Worldwide technical support
operating profitability and decreases maintenance costs • Product specialists dedicated to providing application
engineering

2
Filter media

Microglass (VG)
Multilayer, pleated construction made with synthetic
microglass fiber.

Features:
• High dirt-holding capacity
• High retention of fine contaminants while maintaining per-
formance over the life of the element
• High stability to variable operating pressures and flow rates
• High collapse resistance for added protection

Microglass

Paper (P)
Single layer, pleated construction made with organic cellulose
fiber fleece used for flushing operations.

Paper

Stainless steel wire mesh (G)

Single or multilayer, pleated construction made with stainless
steel wire mesh in different weaves, depending on retention
ratings.

Features:
• Removes particulate from heavily contaminated fluids
• Protects pumps with a minimal pressure drop decreasing
the risk of cavitation
• Compatible with a wide range of fluid types

Stainless steel wire mesh

Surface filtration (mesh) Depth filtration (microglass)

3
 Return-line filters
Series TEF, DTEF, TEFB, TRW
TEFB Application: Mounted on top or in the reservoir with the
outlet port returning to the reservoir
Operating pressure: Up to 145 psi (10 bar)
Flow rates: Up to 1902 gpm (7200 l/min)
Filtration materials: Paper, microglass or
stainless steel wire mesh
TEF
Benefits: Lightweight and easy to change, minimizes chance
of oil spillage during element change and the resulting
environmental concern

TRW

TNRS Return-line filters

with suction connection
Series TRS, TNRS
Application: Tank-mounted return-line filters with suction
connection for mobile hydraulic applications having a minimum
of two independent hydraulic circuits
Operating pressure: 145 psi (10 bar)
Flow rate: Up to 119 gpm (450 l/min)
Filtration materials: Paper, microglass or stainless steel
wire mesh
Benefits: Tank-top-mounted, in-line filters supply clean suction
flow and prevent cavitation; custom designs available
TRS

Stainless steel pressure filters

Series EH, EHP, EHPF
Application: Mounted in pressure lines
EHD
Operating pressure: Up to 6090 psi (420 bar)
EH

Series EHD, EDU, EDA1

Application: Mount in suction, pressure, or return lines. The
filter flow path can be switched to either of the two chambers
Operating pressure: Up to 4568 psi (315 bar)
Benefits: For continuous filtration without system shutdown,
the duplex design is equipped with a three-way changeover
EDA
valve. This makes it possible for the user to divert the flow to
the second filter for servicing or changing

1
Designed according to ASME VIII Div. 1,
U-Stamp option available

4
Duplex pressure filters
Series MDD, HDD
Application: For continuous operation. Mount in suction,
pressure or return lines
Operating pressure: Up to 4567 psi (315 bar) HDD
Flow rates: MDD up to 26.4 gpm (100 l/min),
HDD up to 356 gpm (1350 l/min)
Filtration materials: Paper, microglass or
stainless steel wire mesh
Benefits: For continuous filtration without system shutdown,
the duplex design is equipped with a three-way changeover
valve. This makes it possible for the user to divert the flow to the
second filter for servicing or changing

Series DU, DUV, DSF

Application: For continuous operation. Mount in suction,
pressure or return lines
Operating pressure:
• DU, DUV - 464 psi (32 bar)
• DSF - 363 psi (25 bar)
Flow rates: DU up to 1056 gpm (4000 l/min),
DUV (vertical inlet/outlet) up to 528 gpm (2000 l/min),
DSF (inline) up to 87 gpm (330 l/min)
Filtration materials: Paper, microglass or
stainless steel wire mesh DU 1050

Benefits: For continuous filtration without system shutdown, a

rotary slide or ball valve is internally mounted. This makes it DU 2005
possible to switch from one filter to the other for servicing or
changing filter while in the “off” position
Designed according to AD2000 with an option to provide ASME
equivalent material and supporting calculations

DWF
Series DWF
Application: For continuous operation. Mount in suction,
pressure or return lines
Operating pressures: 232 psi (16 bar)
Flow rates: Up to 1585 gpm (6000 l/min)
Filtration materials: Paper, microglass or
stainless steel wire mesh
Benefits: For continuous filtration without system shutdown,
the duplex design is equipped with a three-way changeover
valve. This makes it possible for the user to divert the flow to the
second filter for servicing or changing
Designed according to ASME VIII Div. 1, U-Stamp option available

Series DA
DA
Application: For continuous operation. Mount in suction,
pressure or return lines
Operating pressure: 580 psi (40 bar)
Flow rates: Up to 528 gpm (2000 l/min)
Filtration materials: Paper, microglass or
stainless steel wire mesh
Benefits: For continuous filtration without system shutdown,
the duplex design is equipped with a three-way changeover
valve. This makes it possible for the user to divert the flow to the
second filter for servicing or changing
Designed according to ASME VIII Div. 1, U-Stamp option available

5
 Pressure filters
PN < 1450 psi (100 bar)
Series LF
Application: Mounted in suction, pressure and return lines
Operating pressure: 464 psi (32 bar)
Flow rate: Up to 1057 gpm (4000 (l/min)
Filtration materials: Paper, microglass or
stainless steel wire mesh
Benefits: LF-series filters have side inlets and bottom outlets
on the same level

LF 401

LF 101

Pressure filters
PN > 1450 psi (100 bar)
Series ML, MNL, MF, MFO, MLO
Application: Mounted in pressure lines; threaded design
Operating pressure: Up to 2320 psi (160 bar)
Flow rate: Up to 119 gpm (450 l/min)
Filtration materials: Microglass or
ML stainless steel wire mesh
Benefits: Economical, lightweight filter used for low to
medium pressure applications. Filter requires minimal
clearance during element change, saving valuable space

MNL

MF

6
Pressure filters
PN > 1450 psi (100 bar)
Series HP3
Application: High pressure filters
Operating pressure: Up to 6000 psi (420 bar)
Flow rates: Up to 357 gpm (1350 l/min)
Filtration materials: Paper, microglass or
stainless steel wire mesh
Benefits: In-line or flange mounting; various port and HP3.30
∆p indicator options. Possible to accommodate very high
flow rates with a single housing HP3.60

HP3.600

Manifold mounted pressure filters

PN > 1450 psi (100 bar)
Series HPF, HPP
Application: Flange or manifold mounted in pressure lines
Operating pressure: 2320 psi (160 bar), 4568 psi (315 bar)
Flow rates: Up to 357 gpm (1350 l/min)
Filtration materials: Paper, microglass or
stainless steel wire mesh
Benefits: Simplified mounting saves valuable space and
provides filtration directly at the point needed. Prevents
contaminants from passing downstream during element
changes HPP HPF

7
 Manifold mounted pressure filters,
PN > 1450 psi (100 bar)
Series HPZ
Application: Manifold mounted in pressure lines
HPZ
Operating pressure: Up to 4568 psi (315 bar)
Flow rates: Up to 24 gpm (90 l/min)
Filtration materials: Paper, microglass or
stainless steel wire mesh
Benefits: Simplified mounting saves valuable space and
provides filtration directly at the point needed. Prevents
contaminants from passing downstream during element
changes

Tank mounted suction filters

Series AS, TS, TSW
Application: Mounted to the side of the reservoir below oil
levels. It is positioned vertically in the TS Series or horizontally
in the TSW Series. The suction side faces the reservoir; a
check valve prevents oil from draining from the reservoir
during servicing
Flow rate: Up to 185 gpm (700 l/min)
Filtration materials: Paper, microglass or
stainless steel wire mesh
Benefits: Suction filters can be serviced from the outside of
the reservoir with no additional check valve needed
TSW
TS

AS

Off-line filters
Series NF
Application: Off-line filter for fine filtration of hydraulic and
NF lubrication circuits; supplements the main filter
Operating pressure: 232 psi (16 bar)
Flow rate: Up to 264 gpm (1000 l/min)
Filtration materials: Paper, microglass or
stainless steel wire mesh
Water absorption elements are also available
Benefits: Offers a large filtration area in a compact size
allowing for high dirt-holding capacity even with small grades
of filter fineness. Filter element can be changed quickly and
without tools

8
Suction strainers
Series SS
Application: Filters coarse particles to prevent pump damage
Operating temperature: -20 to 210 °F (-28 to 100 °C)
Flow rates: Up to 100 gpm (380 l/min)

SS

Tank breathers
Series NBF, EBF, TBF, BFD, BF-WP
Application: Assures that no contamination reaches
the tank through air exchange or water condensation in
the reservoir
Flow rates: Up to 925 gpm (3500 l/min) BFD
Filtration materials:
• NBF, BF-WP - Paper, microglass
• EBF, TBF - Paper
NBF
• BFD - Silica gel, microglass
Benefits: Protects system from airborn debris and/or moisture

Spin-on filters
Series SPL, SPH
Application: In-line filter, mounted into pressure and return
lines for all hydraulic systems
Flow rate: Up to 180 l/min
Filtration materials: Microglass standard, other
materials on request
Benefits: Fits into many leading filter systems

Clogging indicators
Series AE, AOR/AOC, OP/OE, O, E, VS
Application: Wide range of clogging indicators for
hydraulic and lubrication systems
Types: Optical, electrical, optical-electrical, electronic.
Available variations include: block and threaded design, versions
with explosion-proof, reset function and control function
Benefits: Easy integration into automatic control systems,
allows for continuous contamination control and pressure
differential measuring, early identification of increased
contamination, and optimal utilization of filter elements

9
 Filter efficiency data
Multi-pass performance Filtration quotient ßx µm(c) for filter materials
according to ISO 16889 1000

1VG

3VG

6VG

10VG

ß-values 100 25VG

10API

25API

10
2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 32.0
particle size [µm(c)]

Calculation of the filtration quotient ßx µm(c)

amount of particles of the

size ≥ x µm(c) before the filter
ßx µm(c) =
amount of particles of the
size ≥ x µm(c) after the filter

Conversion of filtration
quotient ßx µm(c) into filtration efficiency (in %)

filtration quotient -1
x 100 = %
filtration quotient

(200-1)
e.g. ß10 µm(c) = 200 x 100 = 99.5%
200

10
Systems sensitivity and The cleanliness of the oil in a hydraulic system is determined
by the micron rating of the filter element, the type of
optimal cleanliness class contamination, and the size and distribution of the particles in
the fluid.
This table presents standard data values. To determine the
actual contamination levels of the oil, it should be analyzed
using established procedures for oil analysis.

System types Required class according Required class according to Recommended

Application case to ISO 4406:99 NAS 1638 Eaton filter material

Against fine soiling and gumming 16/12/8 2-3 1 VG

up of sensitive systems 17/13/9 3-4 3 VG
Heavy-duty servo motor systems;
high pressure systems with long 19/15/11 4-6 6 VG
service life
Proportional valves; industrial
hydraulics with high operating 20/16/13 7-8 10 VG
safety

Heavy industries; low pressure

23/19/15 9-11 25 VG
systems; mobile hydraulics

Eaton’s wide range of filter elements enables trouble-free

operation with standard fluids, but also when filtering abrasive
fluids, cooling lubricants or water-based fluids and are
designed to achieve cleanliness class requirements. We can
perform fluid analysis capabilities on-site or in our lab to
determine the best filter element for your hydraulic and
lubrication system requirements.

In addition to proprietary tests developed by Eaton, filter

elements are tested according to several ISO standards:

ISO 2941 Verification of collapse/burst pressure rating

ISO 2942 Verification of fabrication integrity

ISO 2943 Verification of material compatibility
with fluids

ISO 3723 Method for end load test

ISO 3724 Determination of resistance to flow

fatigue using particulate contaminant

ISO 3968 Evaluation of pressure drop versus flow

characteristics

ISO 16889 Multi-pass method for evaluating

filtration performance

11
North America China For more information, please US
44 Apple Street No. 3, Lane 280, email us at [email protected]
Linhong Road
EFINHDL-US
Tinton Falls, NJ 07724
Toll Free: 800 656-3344 Changning District, 200335 or visit www.eaton.com/filtration 02-2019
(North America only) Shanghai, P.R. China
© 2019 Eaton. All rights reserved. All trademarks
Tel: +1 732 212-4700 Tel: +86 21 5200-0099 and registered trademarks are the property of their
respective owners. All information and recommenda-
tions appearing in this brochure concerning the use of
Europe/Africa/Middle East Singapore products described herein are based on tests believed
Auf der Heide 2 100G Pasir Panjang Road #07-08 to be reliable. However, it is the user’s responsibility
53947 Nettersheim, Germany Singapore 118523 to determine the suitability for his own use of such
Tel: +49 2486 809-0 Tel: +65 6825-1668 products. Since the actual use by others is beyond our
control, no guarantee, expressed or implied, is made
Friedensstraße 41 by Eaton as to the effects of such use or the results
68804 Altlußheim, Germany Brazil to be obtained. Eaton assumes no liability arising out
Tel: +49 6205 2094-0 Rua Clark, 2061 - Macuco of the use by others of such products. Nor is the infor-
13279-400 - Valinhos, Brazil mation herein to be construed as absolutely complete,
An den Nahewiesen 24 since additional information may be necessary or
55450 Langenlonsheim, Germany Tel: +55 11 3616-8400
desirable when particular or exceptional conditions or
Tel: +49 6704 204-0 circumstances exist or because of applicable laws or
government regulations.