NTE7039 & NTE7104

Integrated Circuit
Vertical Deflection Output Circuit
w/Drive Circuit for CRT Display

Description:
The NTE7039 and NTE7104 are vertical deflection output ICs developed for use in high–grade TVs
and displays. The interlace and crossover distortion responses, in particular, have been greatly im-
proved, allowing excellent picture quality on large size television screens and high precision interlace
mode displays.
Also, pulse signals can be used for input signals due to the on–chip sawtooth wave generating circuit
and driver circuit. Further, the DC and AC feedback circuits can be formed with these ICs alone, sim-
plyfing pattern design of sets and ensuring stable performance.
The NTE7104 has a maximum deflection current of 1.8Ap–p, making it appropriate for use in portable
to mid–size televisions while the NTE7039 has a minimum deflection current of 2.2Ap–p, so it can be
used for larger size sets, and can drive television screen sizes from 33 to 37 inches.
Features:
D Low Power Dissipation due to On–Chip Pump–Up Circuit
D On–Chip 50/60Hz Vertical Size Control Circuit
D On–Chip Sawtooth Wave Generating Circuit
D On–Chip Drive Circuit
D Vertical Output Circuit
D On–Chip Thermal Protection Circuit
D Excellent Interlace Response
D Excellent Crossover Response
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Driver Supply Voltage, +VCC1 max . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V
Pump–Up Supply Voltage, +VCC8 max . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V
Output Supply Voltage, +VCC13 max . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62V
Deflection Output Current, IDEF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –1.5 to +1.5AP–O
Thermal Resistance, Junction–to–Case, RthJ–C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4°C/W
Allowable Power Dissipation (With Infinite Heat Sink), PD max . . . . . . . . . . . . . . . . . . . . . . . . . . . 8W
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +85°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +150°C
Recommended Operating Conditions: (TA = +25°C unless otherwise specified)
Parameter Symbol Min Typ Max Unit
Driver Supply Voltage +VCC1 8 12 14 V
Pump–Up Supply Voltage +VCC8 10 24 27 V
Deflection Output Current I12p–p
NTE7039 up to 2.2 Ap–p
NTE7104 up to 1.8 Ap–p
Ramp Waveform Pulse Height V6p–p
NTE7039 up to +B1/3 Vp–p
NTE7104 up to –1.01 Vp–p

Electrical Characteristics: (TA = +25°C, +VCC1 = 12V, +VCC8 = 24V unless otherwise specified)
Parameter Symbol Test Conditions Min Typ Max Unit
Driver Supply Current ICC1 5.6 6.7 7.8 mA
Trigger Input Threshold Voltage V2 2.6 2.9 3.2 V
Vertical Amplitude Control Pin Voltage V4 5.9 6.1 6.3 V
Ramp Waveform Generator Start Voltage VRAMP 4.6 4.9 5.2 V
Pump–Up Charge Saturation Voltage VS9–11 I9 = 20mA – – 1.8 V
Pump–Up Discharge Saturation Voltage VS8–9
NTE7039 I = 1.1A – – 3.2 V
NTE7104 I = 0.9A – – 3.0 V
Deflection Output Saturation Voltage (Lower) VS12–11
NTE7039 I = 1.1A – – 1.5 V
NTE7104 I = 0.9A – – 1.2 V
Deflection Output Saturation Voltage (Upper) VS13–12
NTE7039 I = 1.1A – – 3.5 V
NTE7104 I = 0.9A – – 3.2 V
Idling Current IDL 35 – 65 mA
Voltage Gain – 59 – dB

Pin Connection Diagram

(Front View)
13 Power Supply for
Vertical Output
12 Vertical Output
11 GND
10 OSC Stop
9 Pump–Up Output
8 +VCC8
7 Vertical Output
AC/DC Feedback
6 Ramp Generator
5 Vertical Size Control
4 Vertical Amp Control
3 Time Constant
2 Vertical Trigger Input
1 +VCC1
 1.010 (25.6) .095
.134 (4.4) Dia (2.4)

.548
(13.9) .607
(15.4)

1 13

.178
(4.5)

.079 (2.0)