On / Off Hybrid Solar Inverter
Solar System
PH1800 MPK Plus Series
Specification
On/Off Grid Hybrid Solar Inverter
MODEL PH18-1K MPK Plus PH18-2K MPK Plus PH18-3K MPK Plus PH18-4K MPK Plus PH18-5K MPK Plus
Feature: NOMINAL 24VDC 48VDC
Reted Power 1000VA/ 800W 2000VA/ 1600W 3000VA/ 2400W 4000VA/ 3200W 5000VA/4000W
Pure sine wave output Surge Power 2000VA 4000VA 6000VA 8000VA 10000VA
Waveform Pure sine wave
On/off grid inverter with energy storage
AC Voltage Regulation
Multiple operations: On-Grid, Off-Grid, Grid-Tie (Batt.Mode) 230VAC±5%
with Battery Back-up also recognized as Grid-Interactive INVERTER
Electric current 3.4A 7.0A 10.5A 13.0A
Built-in MPPT solar charge controller OUTPUT
Output frequency
50Hz±0.1%
Selectable input voltage range for home appliances precision
Off grid≤2%
and personal computers THD
Grid discharge ≤3%
Selectable charging current based on applications (Linear loads)
Grid charge ≤3%
PH
Configurable AC/Solar input priority via LCD setting
Inverter Efficiency (Peak) 90% 93%
Compatible to mains voltage or generator power
Transfer Time 10ms(FST、APL)；20ms(SLO)
Auto restart while AC is recovering
Voltage 230VAC
Smart battery charger design to optimize battery AC
Selectable Voltage Range 170~280VAC(FST)；90~280VAC(SLO);184-253VAC(APL)
performance INPUT
Cold start function Frequency Range 50Hz/60Hz (Auto sensing)
Parallel operation with up to 3 units (Available for Nominal voltage 24VDC 48VDC
MUST PH18-4K/5K MPK Plus) BATTERY Floating Charge Voltage 27VDC 54VDC
Optional Remote Control Panel available Overcharge Protection 31VDC 60VDC
Introduction: Maximum PV Array
145VDC
Open Circuit Voltage
This is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer PV Array MPPT Voltage
30~130VDC 64~130VDC
uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible Range
SOLAR Standby Power
button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different Consumption
2W
CHARGER
applications. &
Reted Power 1500W 3000W
AC
LCD Display Information Solar System Connection CHARGER Maximum Solar Charge
60A
Current
Maximum Efficiency 98%
1 Maximum AC Charge
10A or 20A 20A or 30A 60A
Current
Maximum Charge Current 60A 120A
2 4
Dimension,W*H*D(mm) 272*372*131 295*528*141
MECHANICAL
PV
PV panel
panel SPECIFICATIONS
Net Weight(kg) 7.4 7.6 8.0 12.5 13.5
3 5
Humidity 5% to 95% Relativ Humidity (Non-condensing)
7 8 12 16 15 9 7 8 12 16 15 9 OTHER Operating Temperature 0°C -55°C
PH
Storage Temperature -15°C -60°C
Utility
Utility Approximate Back-up Time Table
Model Load（VA） Backup Time@24V 100Ah(min) Backup Time@24V 200Ah(min) Model Load（VA） Backup Time@48V 100Ah(min) Backup Time@48V 200Ah(min)
100 2529 5058
11 14 13 10 6 11 10 6 200 766 1610
1KVA 500 482 1035
4KVA-5KVA parallel model 1KVA-5KVA single model
1KVA 600 198 503
1000 186 471
1. LCD display 10. Battery input
Generator 1000 112 269 200 1581 3161
2. Status indicator 11. Circuit breaker Generator External
External
Battery pack
Battery pack Home Appliances
Home Appliances 200 766 1610 2KVA 1000 268 615
3. Charging indicator 12. RS485 communication port
2000 106 257
2KVA 1000 112 269
4. Fault indicator 13. Parallel communication cable (only for parallel model) 300 1054 2107
2000 50 112
5. Function buttons 14. Parallel switch 3KVA 1500 159 402
300 449 1100
6. Power on/off switch 15. Dry contact Back Panel 3000 63 155
3KVA 1500 68 164 400 766 1610
7. AC input 16. USB
4KVA 2000 112 269
8. AC output 3000 28 67
4000 50 112
9. PV input 500 613 1288
NOTE: For parallel model installation and operation, please check separate 5KVA 2500 90 215
parallel installation guide for the details. 5000 40 90
-23- -24-
