DIESEL GENERATOR SET

FEATURES

STANDBY
4000 ekW 5000 kVA
60 Hz 1800 rpm 4160 Volts
Caterpillar is leading the power generation
Market place with Power Solutions engineered to
deliver unmatched flexibility, expandability,
Image shown may not reflect actual package reliability, and cost-effectiveness.

FUEL/EMISSIONS STRATEGY CAT C175-20 DIESEL ENGINE

• Low BSFC • Reliable, rugged, durable design
• Four-stroke diesel engine combines consistent
DESIGN CRITERIA performance and excellent fuel economy with
• The generator set accepts 100% rated load in minimum weight
one step per NFPA 110 and meets ISO 8528-5
transient response. CAT SR5 GENERATOR
• Designed to match performance and output
FULL RANGE OF ATTACHMENTS characteristics of Cat diesel engines
• Wide range of bolt-on system expansion • Single point access to accessory connections
attachments, factory designed and tested
• Flexible packaging options for easy and cost CAT EMCP 4 CONTROL PANELS
effective installation • Simple user friendly interface and navigation
• Scalable system to meet a wide range of
SINGLE-SOURCE SUPPLIER customer needs
• Fully prototype tested with certified torsional • Integrated Control System and Communications
vibration analysis available Gateway

WORLDWIDE PRODUCT SUPPORT

®
• Cat dealers provide extensive post
sale support including maintenance and
repair agreements
• Cat dealers have over 1600 dealer branch
stores operating in 200 countries.
• The Cat® S•O•S SM program effectively
detects internal engine component condition,
even the presence of unwanted fluids and
combustion by products.

EPD0069-B 1
STANDBY 4000 ekW 5000 kVA
60 Hz 1800 rpm 4160 Volts

FACTORY INSTALLED STANDARD & OPTIONAL EQUIPMENT

System Standard Optional

Air Inlet • Air cleaner, 4 x single element canister with service [ ] Air cleaner, 4 x dual element with service
indicator(s) indicator(s)
• Plug group for air inlet shut-off [ ] Air inlet adapters
Cooling • SCAC cooling [ ] Remote horizontal SCAC radiator
• Jacket water and AC inlet/outlet flanges [ ] Remote fuel cooler
[ ] Low coolant level sensor (for remote radiators)
Exhaust • Dry exhaust manifold [ ] Engine Exhaust Temperature Module
• Bolted flange (ANSI 8" & DIN 200) with bellow for [ ] Mufflers (15 dBA,25 dBA, or 40 dBA)
each turbo (qty 4) [ ] Dual 20" or single 24" vertical exhaust collector
[ ] Weld flanges: ANSI 20" and ANSI 24”
Crankcase • Open crankcase ventilation [ ] Crankcase explosion relief valve
Systems
Fuel • Primary fuel filter with water separator
• Secondary fuel filters (engine mounted)
Generator • 3 phase brushless, salient pole [ ] Oversize generators
SR5 • Space heater kit [ ] Power connection arrangement
• IEC platinum stator RTD's
• Cat digital voltage regulator (CDVR)
Governor • ADEM™ A4 [ ] Redundant shutdown
Control • EMCP 4.2 Genset Controller [ ] Local & remote annunciator modules
Panels [ ] Discrete I/O module
[ ] Generator temperature monitoring & protection
[ ] Remote monitoring
[ ] Load share module
Lube • Lubricating oil
• Oil filter, filler and dipstick
• Oil drain line with valves
• Fumes disposal
• Gear type lube oil pump
• Integral lube oil cooler
• Electric prelube pumps
Mounting • Rails-engine / generator [ ] Spring type linear vibration isolators
• Rubber anti-vibration mounts (shipped loose) [ ] IBC vibration isolators
Starting / • Dual 24 volt electric starting motors [ ] Oversized battery set
Charging • Batteries with rack and cables [ ] 75 amp charging alternator
• Battery disconnect switch [ ] Battery chargers (20,35 or 50 Amp)
[ ] Jacket water heater
[ ] Redundant Electric Starter
General • RH service (Except LH Service Oil Filter) [ ] Barring group- manual or air powered
• Paint - Caterpillar Yellow with high gloss black rails [ ] Factory test reports
• SAE standard rotation
• Flywheel and flywheel housing - SAE No. 00

EPD0069-B 2
STANDBY 4000 ekW 5000 kVA
60 Hz 1800 rpm 4160 Volts

SPECIFICATIONS

CAT EMCP 4 CONTROL PANELS

CAT GENERATOR EMCP 4 controls including:
- Run / Auto / Stop Control
Frame ……………………..…………………….. 3055 - Speed Adjust
Excitation ……………………………………………PM - Voltage Adjust
Pitch………………………………………………0.6667 - Engine Cycle Crank
Number of poles……………………………………….4 - Emergency stop pushbutton
Number of bearings …………….…………………….2 EMCP 4.2 controller features:
Number of Leads………………………………………6 - 24-volt DC operation
Insulation ……………………………………….Class F - Environmental sealed front face
IP rating ………………………………..Drip proof IP23 - Text alarm/event descriptions
Over speed capability - % of rated………………125% - True RMS AC metering, 3-phase, ±1%
Wave form deviation………………………………...3 % accuracy.
Voltage regulator…………. ……3 phase sensing with Digital indication for:
selectable V/Hz regulation - RPM
Telephone Influence Factor …………….Less than 50 - DC volts
Harmonic Distortion ……………………..Less than 5% - Operating hours
- Oil pressure (psi, kPa or bar)
- Coolant temperature
- Volts (L-L & L-N), frequency (Hz)
- Amps (per phase & average)
- Power Factor (per phase & average)
CAT DIESEL ENGINE - kW (per phase, average & percent)
C175-20 SCAC, V-20, 4 stroke, water-cooled diesel - kVA (per phase, average & percent)
- kVAr (per phase, average & percent)
Bore ……………………………….175.00 mm (6.89 in) - kW-hr (total)
Stroke ……………………………..220.00 mm (8.66in) - kVAr-hr (total)
Displacement ……………………105.8 L (6456.31 in3) Warning/shutdown with common LED indication
Compression ratio…………….….……………….15.3:1 of shutdowns for:
Aspiration…………………….….…………………….TA - Low oil pressure
Fuel system………………………………Common Rail - High coolant temperature
Governor Type…………………………….ADEM™ A4 - Overspeed
- Emergency stop
- Failure to start (overcrank)
- Low coolant temperature
- Low coolant level
Programmable protective relaying functions:
- Generator phase sequence
- Over/Under voltage (27/59)
- Over/Under Frequency (81 o/u)
- Reverse Power (kW) (32)
- Reverse Reactive Power (kVAr) (32RV)
- Overcurrent (50/51)
Communications
- Customer data link (Modbus RTU)
- Accessory module data link
- Serial annunciator module data link
- 6 programmable digital inputs
- 6 programmable relay outputs (Form A)
- 2 programmable relay outputs (Form C)
- 2 programmable digital outputs

EPD0069-B 3
STANDBY 4000 ekW 5000 kVA
60 Hz 1800 rpm 4160 Volts

Technical Data

Open Generator Set - 1800 rpm/60 Hz/4160 Volts DM8857

Low BSFC

Generator Set Package Performance

Genset Power rating @ 0.8 pf 5000 kVA
Genset Power Rating without fan 4000 ekW
Fuel Consumption
100% Load with fan 1038.5 L/hr 274.4 Gal/hr
75% Load with fan 739.2 L/hr 195.3 Gal/hr
50% Load with fan 746.0 L/hr 197.1 Gal/hr
Inlet Air
3
Combustion air inlet flow rate 338.3 m /min 11946.4 cfm
Exhaust System
Exhaust stack gas temperature (engine out) 479.1 °C 894.4 °F
3
Exhaust gas flow rate 870.0 m /min 30721 cfm
Exhaust system backpressure (maximum allowable) 6.7 kPA 26.9 in water
Heat Rejection
Heat rejection to cooolant (total) 2124 kW 120753 Btu/min
Heat rejection to exhaust (total) 3957 kW 224969 Btu/min
Heat rejection to aftercooler 438 kW 24882 Btu/min
Heat rejection to atmosphere from engine 304 kW 17307 Btu/min
Heat rejection to atmosphere from generator 171 kW 9733 Btu/min
Alternator
Motor starting capabiliy @30% voltage dip 10253 skVA
Frame 3055
Temperature Rise 130 °C 234 °F
Lube System
Sump refil with filter 675 L 178.3 gal
2
Emissions (Nominal)
NOx g/hp-hr 5.27 g/hp-hr
CO g/hp-hr 0.5 g/hp-hr
HC g/hp-hr 0.18 g/hp-hr
PM g/hp-hr 0.04 g/hp-hr
Note: This generator set is not offered with an engine driven radiator. Addition of an engine driven fan will reduce the output below the nameplate rating.

1
Some packages may have oversized generat ors with a diff erent temperature rise and motor starting charac teristics. Generator t emperature rise is based on a 40 degree C
ambient per NEMA MG1-32.
2
Emissions data measurement proc edures are consistent with those described in EPA CFR 40 Part 89, Subpart D & E and ISO8178-1 for meas uring HC, CO, PM, NOx.
Data shown is based on steady s tate operating conditions of 77°F , 28. 42 in HG and number 2 diesel fuel with 35° API and LHV of 18,390 btu/ lb. The nominal emis sions data
shown is subject to instrument ation, measurement, f acility and engine to engine variations. Emis sions data is bas ed on 100% load and thus cannot be used to compare to EPA
regulations which use values based on a weighted cycle. Emis sions values are tailpipe out with af tertreatment inst alled. Values shown as zero may be great er t han zero but were
below the detection level of the equipment used at the tie of measurement.

EPD0069-B 4
STANDBY 4000 ekW 5000 kVA
60 Hz 1800 rpm 4160 Volts

RATING DEFINITIONS AND CONDITIONS

Meets or Exceeds International Specifications: Ratings are based on SAE J1349 standard conditions.
AS1359, CSA, IEC60034-1, ISO3046, ISO8528, NEMA These ratings also apply at ISO3046 standard conditions
MG 1-22, NEMA MG 1-33, UL508A, 72/23/EEC,
98/37/EC, 2004/108/EC Fuel Rates are based on fuel oil of 35º API [16º C (60º
F)] gravity having an LHV of 42 780 kJ/kg (18,390 Btu/lb)
Standby - Output available with varying load for the when used at 29º C (85º F) and weighing 838.9 g/liter
duration of the interruption of the normal source power. (7.001 lbs/U.S. gal.). Additional ratings may be available
Average power output is 70% of the standby power for specific customer requirements, contact your
rating. Typical operation is 200 hours per year, with Caterpillar representative for details. For information
maximum expected usage of 500 hours per year. regarding Low Sulfur fuel and Biodiesel capability, please
Standby power in accordance with ISO8528. Fuel stop consult your Cat dealer.
power in accordance with ISO3046. Standby ambients
shown indicate ambient temperature at 100% load which
results in a coolant top tank temperature just below the
shutdown temperature.

EPD0069-B 5
STANDBY 4000 ekW 5000 kVA
60 Hz 1800 rpm 4160 Volts

DIMENSIONS

Package Dimensions
Length 6719 mm 267.5 in NOTE: For reference only - do not use for
installation design. Please contact your
Width 2377 mm 93.6 in local dealer for exact weight and
dimensions.
Height 2556 mm 100.6 in

www.Cat-ElectricPower.com

©2012 Caterpillar
All rights reserved.

Materials and specifications are subject to change without notice. The

International System of Units (SI) is used in this publication.
Sourced: U.S. Sourced
CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," the “Power
EPD0069-C (03/2012) Edge” trade dress as well as corporate and product identity used herein, are
trademarks of Caterpillar and may not be used without permission.

EPD0069-B 6