Scribd
Upload
133 views2 pages

Pipe Installation Inspection Form: Trench & Bedding Checks (Actual Field Measurements)

This 3-sentence summary provides the key information from the PiPe installation inspection form: The form documents inspections of pipe installations, including measurements of trench dimensions, bedding thickness, and backfill compaction to ensure compliance with specifications. Issues encountered during construction like soft ground or obstructions are noted, along with certification of materials and removal of pavement prior to backfilling. Inspectors and contractors must sign off to confirm accuracy of the documentation and compliance with required standards.

Uploaded by

ReIngenieria S.R.L.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
133 views2 pages

Pipe Installation Inspection Form: Trench & Bedding Checks (Actual Field Measurements)

This 3-sentence summary provides the key information from the PiPe installation inspection form: The form documents inspections of pipe installations, including measurements of trench dimensions, bedding thickness, and backfill compaction to ensure compliance with specifications. Issues encountered during construction like soft ground or obstructions are noted, along with certification of materials and removal of pavement prior to backfilling. Inspectors and contractors must sign off to confirm accuracy of the documentation and compliance with required standards.

Uploaded by

ReIngenieria S.R.L.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CS-6 (3-19)

PiPe installation insPection Form


www.penndot.gov

Project # ___________________________________________ County, Route & Segment

Inspector ___________________________________________ Installation Date

Item # ______________________ Ref. # ________________ Producer Code _____________ Contractor______________

Description ____________________________________________________________________________________________

Station ______________________ Plan Page ____________ Pipe Mat’l (RCP, Metal, HDPE, Iron, Other) ______________

Do not lay slope back or cut extra Pipe Size _________ inches
trench width below top of pipe
W = Width of trench at Top of Pipe feet
W
Refer to RC – 30M
Note: Trench or shoring walls to be vertical to Top of Pipe

Backfill B = Thickness of bedding under pipe. inches


Do T
T = Outside diameter of pipe to trench wall. inches
S = Total Depth of bedding. inches
Bedding
S Do = Outside diameter of pipe inches
B

Trench & Bedding Checks* (Actual Field Measurements)


Check Stations & Location T W B S Do Initial Date

* Check every 50 feet, with a minimum of two checks per run.

Grade Backfill (Document density using TR-478A or TR 4276A)


Field Check
Measurements Method Compaction Soil or Lift Density Date
% passing # compactor
Inspector’s

(Depth - ft) (Ruler, Method/ Aggregate Thickness required


3/8” sieve passes/lift
Initials

laser) Equipment Type (inches) (% SPD)

0’ - 3’ 100 % mmm
3’ - 100 %
100 %
100 %
100 %

Type of Joints (601.3d) ____________________ Joints Installed Satisfactorily?. . . . . . . . . . . . . . . . . . . Yes No

Materials: Certified or Tested and approved prior to incorporation into the project? . . . . . . . . . . . . . . . . . . . . . . Yes No

All pavement undermining cut back and removed prior to compaction? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes No
CS-6 (3-19)

Remarks: Record problems, soft foundations, under cuts, rock, obstructions, utilities encountered, deviations, etc. Describe and
note location of existing conduits encountered, whether connected, plugged and abandoned, reconnected, etc.

Sketch Area:

Inspector’s Signature Date

By signing below, I certify that my company performed the work, the information on both pages of this form is accurate, the work
complied with Publication 408, including Section 601 and references therein, and any deviations are noted on this form.

Name (print): ___________________________________________________ Title:

Company Name: ________________________________________________________________________________________

Signature: _____________________________________________________ Date:

You might also like