avaya.

com

Ethernet Routing Switch 5000 Series

The Avaya Ethernet Routing Switch 5000 series is a set of premium Stackable LAN Switches
providing the resiliency, security and convergence readiness required for today’s high-end
Wiring Closets, high-capacity Data Centers and smaller Core environments.

Avaya’s industry-leading resilient Stack- Avaya offers the highly flexible Ethernet
able Chassis provides high-availability Routing Switch 5000 Series (ERS
for delay-sensitive and business-critical 5000); encompassing the original
data and voice applications. Up to eight 5500 models and the new 5600
Ethernet Routing Switch 5000 units models, combining to offer a versatile
can form a resilient Stacked solution, portfolio of ten models. This provides
manageable as a single entity, of up to Enterprises the ability to choose the
400 ports, with maximized uptime even model that best fits their networking
Ethernet Routing Switch 5500 Series if an individual Switch within the Stack requirements (see table below for details).
should fail. The ERS 5000 Series features 100%
cross-product stacking compatibility.

Scalable, resilient The original ERS 5500 models feature

a stacking capacity of 80 Gbps per
and flexible Ethernet
Switch and up to 640 Gbps for a
Switching full Stack of eight Switches, and the
Recognizing that networking new ERS 5600 models introduce an
requirements vary from business to enhanced stacking capacity of
business – with differing needs at 144 Gbps per Switch and 1.152 Tbps
Ethernet Routing Switch 5600 Series for a full Stack. This is unprecedented
the Edge, Core and Distribution layer,

Model Link and uplink ports

ERS 5510-24T 24 x 10/100/1000, including 2 x Combo 1000BASE-T/SFP

ERS 5510-48T 48 x 10/100/1000, including 2 x Combo 1000BASE-T/SFP

ERS 5520-24T-PWR 24 x 10/100/1000 with Power-over-Ethernet, including 4 x Combo 1000BASE-T/SFP

ERS 5520-48T-PWR 48 x 10/100/1000 with Power-over-Ethernet, including 4 x Combo 1000BASE-T/SFP

ERS 5530-24TFD 24 x 10/100/1000, including 12 x Combo 1000BASE-T/SFP, plus 2 x 10GBASE-XFP

ERS 5632FD 24 x 100/1000BASE-SFP plus 8 x 10GBASE-XFP

ERS 5650TD 48 x 10/100/1000 plus 2 x 10GBASE-XFP

ERS 5650TD-PWR 48 x 10/100/1000 with Power-over-Ethernet plus 2 x 10GBASE-XFP

ERS 5698-TFD 96 x 10/100/1000, including 6 x Combo 1000BASE-T or 100/1000BASE-SFP, plus 2 x 10GBASE-XFP

ERS 5698TFD-PWR 96 x 10/100/1000 with Power-over-Ethernet, including 6 x Combo 1000BASE-T or 100/1000BASE-SFP, plus 2 x 10GBASE-XFP

FACT SHEET 1
 avaya.com

in the industry and ensures optimal

performance for delay-sensitive application AVAYA’S INNOVATIVE, RESILIENT 'STACKABLE
traffic traversing the Stack.
CHASSIS' ARCHITECTURE
ERS 5600 Switches can be Stacked with
Avaya has continued to evolve and perfect its Enterprise Stackable portfolio into a truly
one another or with any Ethernet Routing
Switch 5500 unit, and when connected resilient, high-performance Stackable solution. Avaya’s Ethernet Routing Switch 2500,
to an adjacent ERS 5500, the ERS 5600 4500, and 5500 and 5600 product lines all incorporate key capabilities designed to
automatically adjusts to the ERS 5500’s deliver a ‘Stackable Chassis’ solution, including:
stacking bandwidth of 80 Gbps. This
• Ease of growth/management: Extending capacity is easy; simply cable a new unit into the
enhanced flexibility provides the opportunity
to mix and match port configurations based Stack, and the Stack configuration is automatically updated. The Stack acts as a single entity
on operations needs, while preserving that can be managed via a single IP Address.
existing ERS 5500 investments.
• Scalable performance: The high performance design of Avaya’s Stackable Switches along with
ERS 5000 models come with two in-built their high-speed stack connections (up to 144 Gbps per Switch/1.152 Tbps per Stack) helps
auto-sensing stacking connections — to ensure that the Stack scales proportionally as each new unit is added.
implementing sophisticated queuing — for
• Optimal path forwarding: A bidirectional, multi-path forwarding algorithm between
simple, cost-effective and efficient stacking.
This design frees uplink ports for dedicated Switches can ensure that the shortest, most optimal path is chosen for each flow of
connectivity to the backbone. The ERS traffic. This design offers a clear performance advantage over the basic logical ring or
5000’s high-performance architecture token approaches used by other vendors.
promotes optimized throughput across ports,
• No single point-of-failure: Stack operation is unaffected by the failure of any unit in the
uplinks and the virtual backplane.
Stack. Each unit’s independent switching fabric along with distributed, redundant power
ensures continuous operation of the Stack. Individual Stack units can easily be replaced
Ethernet Routing — i.e., a ‘virtual hot-swap’ capability — without impacting Stack operations (a feature
Switch 5000 known as ‘Auto-Unit Replacement’).

deployment scenarios • Switch Clustering: Switch Clustering (based on Avaya’s SMLT technology) can be enabled
The ERS 5000 Series is a flexible solution on the ERS 5000 Series to enhance overall resiliency of the Stack solution, providing
that can be deployed in a variety of load-balancing and sub-second failover.
Enterprise environments. These include:

High-density Wiring Closet

With its non-blocking design, high-density DMLT to Core/Distribution
GbE and integrated 10GbE port options,
the Ethernet Routing Switch 5000 DMLT to Core/Distribution
Series is perfectly suited to providing the
high-performance and highly available
connectivity solution in the Wiring Closet.
Up to eight ERS 5000 Switches can be
IST
combined into a single Stack with each
ERS 5600 unit providing two 10GbE XFP
ports for high-capacity uplinks to the Core Figure 1. Ethernet Routing Switch 5000 in
or Aggregation layers of the network. ERS Horizontal Stacking/Data Center application
5698 models provide even greater cost,
space and energy efficiency with their

2
 avaya.com

NEW FEATURES FOR

Ethernet Routing
THE v6.2 RELEASE
Switch 2500
The following features and enhancements
highlight those added to the ERS 5000
Series capabilities with the release of v6.2
Operating System software:
Trunks distributed
between Switches • Avaya Energy Saver, including the pre-
in a Stack
defined Efficiency Mode for simplified
implementation
Ethernet Routing • IPv6 Routing, introducing support for
Switch 5632FD
Static Routing and IPv6 Auto-Address
Assignment

Trunks distributed between • Security enhancements including

Switches in a Cluster
the new 802.1X MHMA MultiVLAN
Switch Cluster feature that supports multiple RADIUS-
assigned VLANs per port
Figure 2. Ethernet Routing Switch 5000 Series in a small Core application, with ERS 2500 or 4500 Series
Switches at the Edge delivering resiliency and efficiency • A new Lossless Mode for QoS Buffering
that leverages 802.3x Flow Control
• Additional QoS enhancements to Traffic
ultra-dense Gigabit-to-the-Desktop capacity Servers can then be ‘dual-homed’ to separate
Profile Metering, DSCP Mutation, and
and the added flexibility of up to 6 SFP Stacks of ERS 5000 Switches, which in turn
ports per Switch for long-reach fiber optic appear as a single, logical Switch to the rest Egress Queue Shaping
connections. With the ability to support of the network. This enables active-active • Enhanced interoperability between
Power-over-Ethernet (PoE) across all its connections, load-balancing and sub-second Auto-QoS and both 802.1 MED and
ports, the ERS 5000 Series is an effective failover across the Stacks. These features Avaya Auto-Detect & Auto-Configuration
and flexible Wiring Closet/Edge solution in make the ERS 5000 Series a truly cost-
support of desktop and powered devices. effective Data Center solution that combines • Scaling enhancement for 802.1X EAP,
always-on resiliency with high-performance VLANs, IP Routing, and IP Multicast
connectivity. • Additional SFP support plus numerous
High-performance Data Center Edge
The high-performance, low-latency and high- incremental operational features and
availability requirements of the modern Data Highly scalable small Core enhancements
Center make the ERS 5000 Series a perfect The ERS 5000 Series can also serve as a
solution for Server access and consolidation. high-performing, feature-rich small Core
By utilizing Avaya’s innovative ‘Horizontal solution. With high-density 10GbE and 4500 or third-party Access Switches (see
Stacking’ capability – a Switch at the top of SFP ports (up to 64 10GbE and 192 SFP Figure 2) using Avaya’s Switch Clustering
each Server rack, Stacked ‘Horizontally’ – the ports per Stack), the ERS 5530-24TFD technology (SMLT). ERS 5000s in this
ERS 5000 Series can support cost-effective, and 5632FD models are particularly well- configuration can provide up to 800
high-density Server connections. Up to 400 suited to small Core applications. Coupled ports and over 2.3 Terabits of always-on
Gigabit ports and multiple 10GbE uplinks with dynamic routing protocol support (RIP/ performance – while enabling full use of all
per Stack can be deployed in this manner OSPF) – and field-replaceable, redundant Switches and links across the network.
(see Figure 1). power in the 5600 models — the ERS 5000
Series can provide low-cost, resilient small A comprehensive suite of Layer 3 Routing
Avaya’s Switch Cluster solution can further Core solutions. protocols helps ensure that the ERS 5000
enhance overall resiliency through the Series can be a truly effective Core Switch
addition of a second Horizontally-Stacked The ERS 5000 Series can further act as a for the smaller network. IPv4 has been a
‘Top-of-Rack’ series of Switches. Connected Switch Cluster supporting other ERS 2500,

3
 avaya.com

Avaya’s Industry-leading resilient ‘FAST’ architecture delivers the high-availability crucial for delay-sensitive and business-critical data,
voice and video.

long-standing feature and the latest release it with the ability to automatically configure Resilient operations –
introduces support for IPv6 with Static Quality-of-Service (QoS) settings and VLAN
Routes, Auto-Address Assignment, and IPv4/ membership when an IP Phone is detected. redundant power and
IPv6 Tunnelling. IP Multicast support has This can help to ensure fast and easy IP Phone auto-unit replacement
been enhanced with PIM-SM capability deployments across the network.
extended to a Stacked configuration, and full Field-replaceable Power Supplies
IGMPv3 support. The ERS 5600 models support integrated
Automatic QoS
With Automatic QoS, an ERS 5000 Series AC or DC power supplies for improved
redundancy and uptime. The 5632FD and
Convergence-ready Switch supporting a Unified Communications
5650TD models support two and ERS
solution automatically recognizes the
capabilities special, private Differentiated Service Code 5698TFD models support three integrated,
Point (DSCP) values configurable for these field-replaceable supplies. This power
Power-over-Ethernet applications, and optimizes the management supply design offers not only N+1 power
The ERS 5520-24T-PWR, 5520-48T-PWR, of egress queues. Without this automated redundancy and/or supplementary PoE
5650TD-PWR and 5698TFD-PWR models functionality, operators would need to have power, but also provides savings in valuable
provide Standards-based PoE and are detailed knowledge of how QoS works, and rack space and reduction in overall system,
designed to power devices such as IP Phones, also the private DSCP values, to attempt servicing and sparing costs.
Wireless Access Points, networked CCTV manual configuration for optimized queue
cameras, security and lighting devices, and The ERS 5500 models support the external
operation. This feature can help to ensure that
access control devices such as badge readers. redundant power supply 15 solution,
the process is automated and optimized, and
Full interoperability with all Standards-based providing a similar capability for power
protects against mis-configuration.
equipment means these Switches have the redundancy and/or supplementary PoE
flexibility to power devices from any vendors; power, although requiring additional real
ERS 5000 Switches can supply up to 15.4 Dynamic and Granular QoS estate within the rack.
watts per port, as defined in the IEEE The ERS 5000 Series features advanced
802.3af Standard. ASIC designs enabling fined-grained
control of the QoS Egress Queues. This has
Automatic Unit Replacement
The Ethernet Routing Switch 5000 Series
benefits in deployments where changes to
Link Layer Discovery Protocol and supports Automatic Unit Replacement (AUR),
queue settings need to be made in order to
Auto Detection/Auto Configuration a virtual hot-swap functionality that allows
optimize how the network supports specific
The ERS 5000 Series combines the engineers to quickly and easily replace failed
application behavior. Being able to make
functionality of the Link Layer Discovery units in the Stack. When a unit is replaced, the
on-the-fly changes to queue management,
Protocol (LLDP) and Auto Detection/ configuration and software image are automati-
without the need for a reset, dramatically
Auto Configuration (ADAC) to detect and cally synchronized with that saved by the Stack
enhances the practical effectiveness of the
configure IP Phones. The implementation base unit for the failed Switch. This minimizes
network. And ERS 5600 models further
includes the Location Type-Length-Value manual intervention as well as any interruption
extend these capabilities by supporting
(TLV) which provides a mechanism to enable to neighboring users within the Stack.
granular Egress Queue Shaping, in addition
Emergency Location Services for IP Phones to shaping at the port level.
(for example, ‘Enhanced 911’). The ERS 5000 Series also supports the
ability to load a software image into the base
Auto-discovery is extended with Media unit of the Stack and have it automatically
Endpoint Discovery (LLDP-MED) to propagated to other Switches in the Stack;
automatically perform power and VLAN this further simplifies Stack management.
assignments for enabled devices. Avaya further
extends the use of this protocol by coupling

4
 avaya.com

Security for safeguarding

AVAYA ENERGY SAVER
the network
The Avaya Energy Saver solution aligns the consumption of energy to the use of devices
Protecting the network against both external
and increasingly prevalent internal attacks is and building occupancy. It manages the power that devices consume, “dimming”
a critical part of every IT manager’s job. The consumption during off-peak periods - much like a lighting control system - even
ability to do this requires simple-to-manage, turning off low-priority devices that are not needed after-hours. The energy usage
yet intelligent context-aware security solutions profile of the typical enterprise means that there is great potential to deliver further
that not only look at the identity of the person
incremental energy efficiencies - up to a further 20% - by intelligently pruning off-
logging in, but also at the device connecting
peak power consumption, all without the need for any hardware change or investment
into the network. This network access control
approach helps to ensure that only authorized overhead. Avaya Energy Saver can be administered directly on individual Switches or,
individuals and properly scanned/secured more commonly, centrally managed by the Enterprise Policy Manager component of Avaya
devices are allowed to join the network. Unified Communications Management.

Avaya offers a complete solution of energy-efficient equipment with the necessary

Comprehensive & flexible Access
tools to further align the energy consumption of the network with its genuine usage
Control
Through use of IEEE’s 802.1X-based EAP, a requirements. By combining the efficiencies embedded with the ERS 5000 Series
device’s MAC Address, or via login credentials products with intelligent management of the network via Energy Saver, Avaya achieves
a Network Manager can determine which users the highest levels of energy-efficiency possible.
will be granted access to specified resources.
The ERS 5000 Series can also be used in
conjunction with Avaya’s innovative Identity
Engines portfolio solution for advanced, The ERS 5000 Series also supports MAC Simplified management
Standards-based, policy-based and centralized Address-based security, which allows
authentication of all access devices; network A Stack of ERS 5000 Switches can be
authentication.
access is granted or denied via specific MAC managed as a single entity through one IP
Address identification. The ERS 5000 Series Address, simplifying network management.
Network access control through also supports a Guest VLAN capability.
802.1X-based authentication The ERS 5000 Series offers the
The ERS 5000 Series fully supports the Additionally, for Voice-over-Internet Protocol highest level of secure management
IEEE 802.1X Extensible Authentication (VoIP) deployments where the PC connects with features including Secure Shell
Protocol (EAP)-based security a features, to network through a VoIP handset, both (SSH), IP Manager Lists, RADIUS and
which control access to the network based the PC and the IP device are authenticated TACACS+ Authentication, Simple Network
on User credentials. A User is required to individually. Management Protocol (SNMPv3), and
‘login’ to the network using a username/ Secure Network Access.
password, and a database is maintained
on a centralized authentication server, for Directed attack protection
The ERS 5000 Series supports a set of
Dual image support
example RADIUS, which can itself proxy The ERS 5000 Series supports dual agent
to other directory services such as LDAP security features designed to help protect
images. This allows an administrator to
and Active Directory. The ERS 5000 Series against directed attacks. These include
download a newer image to the Switch/
supports Single- and Multi-Host options, Dynamic Host Control Protocol (DHCP)
Stack, and specify when the unit should
with numerous functionality extensions such Snooping, Dynamic Address Resolution
reboot to take the new image, and even
as Guest VLAN, Non-EAP, Last RADIUS- Protocol Inspection, IP Source Guard and
after a new image is installed and running,
assigned VLAN, Fail-Open VLAN, VLAN IGMP Snooping. Together, these help to
the administrator still has the ability to ‘roll
Names, and the new MultiVLAN option; protect against the most common snooping
back’ to the previous image.
delivering a highly versatile and readily- and man-in-the middle attacks that might
deployable solution. otherwise compromise the network.

5
 avaya.com

IPv6 management Lifetime warranty solution for Wiring Closets, high-speed

The ERS 5000 Series supports either IPv4 or Aggregation and Data Centers, Server Farms
Avaya includes Industry-leading warranty
IPv6-based management. Simply select whether and small Core installations.
services for our portfolio of Stackable Ethernet
the Switch/Stack should be managed via IPv4
Routing Switches, including the ERS 5000 Avaya is uniquely positioned to help your
or IPv6, enter the Switch/Stack IP Address
Series products. We provide complimentary business reduce costs by combining voice
in the correct format, and the appropriate
next-business-day shipment of failed hardware and data into an integrated system. The
management paradigm becomes operational.
- including fans and power supplies - for the Ethernet Routing Switch 5000 Series, along
full life of the product; all countries will receive with other Avaya products, can increase
Many-to-many port mirroring next-business-day shipping to replace failed profitability, streamline business operations,
The new ERS 5600 models introduce hardware. Avaya also offers complimentary increase productivity and help gain a
support for many-to-many port mirroring basic technical support: basic for the competitive edge.
to address enhanced control and visibility supported lifecycle of the product and up to
in complex, converged networks. This advanced for the first 90 days after purchase.
feature provides the ability to have multiple This includes support for the shipped software Learn More
instances (up to four) of many-to-one version, with an optional Software Release
To learn more about the Ethernet Routing
port mirroring, and flows to be captured Service available to provide access to new
Switch 5000 Series, contact your Avaya
simultaneously to traffic analyzers, call feature releases.
Account Manager or Avaya Authorized
recorders, IDS/IPS devices, etc. Partner. Or, visit us online at avaya.com.
Summary
Advanced management features
The reliability benefits from modular power
BootP and TFTP support allows centralized
supplies coupled with advanced security,
Switch IP Address assignment, software
QoS and Layer 3 functionality make the
upgrades and SNMP agent updates over the
Ethernet Routing Switch 5000 Series a
network. The RADIUS-based security feature
highly effective premium high-performance
authenticates local console and TELNET logins.

Features ERS 5510 ERS 5520-PWR ERS 5530 ERS 5650 ERS 5698 ERS 5632
10/100/1000 ports 24 / 48 24 / 48 24 (12 Combo) 48 96 (6 Combo) —

GbE SFP ports 2 4 12 Combo — 6 Combo 24

10Gbps XFP ports — — 2 2 2 8

Power-over-Ethernet — 24 / 48 — 48 (5650TD-PWR) 96 (5698TFD-PWR) —

Resilient FAST architecture Yes Yes Yes Yes Yes Yes

Stack capacity 640 Gbps 640 Gbps 640 Gbps 1.152 Tbps 1.152 Tbps 1.152 Tbps

Number of Switches Up to 4 1 1 — — —
supported by an RPS 15
Module

Number of AC or DC Modular — — — Up to 2 Up to 3 Up to 2
Supplies

Typical deployments Desktop Desktop Connectivity, Small Core Desktop Connectivity Desktop Small Core
Connectivity and PoE for Convergence and Server with optional PoE and Connectivity with and Fiber
Server Aggregation Devices Aggregation Server Aggregation optional PoE Aggregation

6
 avaya.com

Specifications
General & Performance
• Switch Fabric performance: 80 – 384 Gbps • Multiple Spanning Tree Groups: 8
• Frame forwarding rate: 35.7 – 172.7 Mpps • MAC Address: up to 16k
• Latency: 9 µsec • DHCP Snooping: up to 1,024 table entries
• Jitter: 12-14 µsec • ARP Entries: up to 1,792
• Frame length: 64 – 1518 Bytes (802.1Q Untagged), 64 – 1522 bytes • IP Interfaces: up to 64
(802.1Q Tagged) • IPv4 Routes: up to 4k
• Jumbo Frame support: up to 9,000 Bytes (802.1Q Tagged) • OSPF Instances: up to 4
• Multi-Link Trunks: up to 32 Groups, with 8 Links per Group • OSPF Adjacencies: up to 16
• VLANs: up to 1,024 Port/Protocol/802.1Q-based

Pluggable Interfaces
• 1000BASE-T up to 100m over CAT5E or better UTP Cable (RJ-45) • 1000BASE-BX up to 10 and 40 km reach variants on SMF (LC)
• 1000BASE-SX up to 550m reach on MMF (Duplex LC) • 100BASE-FX up to 2km reach over MMF (Duplex LC)*
• 1000BASE-SX up to 550m reach on MMF (Duplex MTRJ) • Ethernet-over-T1 up to 2,874m reach over 22AWG Cable (RJ-48C)
• 1000-BASE-LX up to 550m reach on MMF, and up to 10 km on SMF (Duplex LC) • 10GBASE-SR up to 300m reach over MMF (Duplex LC)
• 1000BASE-XD CDWM up to 40 km reach on SMF (Duplex LC) • 10GBASE-LRM up to 220m over FDDI-grade MMF (Duplex LC)
• 1000BASE-ZX CDWM up to 70 km reach on SMF (Duplex LC) • 10GBASE-LR/LW up to 10km reach over SMF (Duplex LC)
• 1000BASE-EX up to 120 km reach on SMF (Duplex LC) • 10GBASE-ER/EW up to 40km reach over SMF (Duplex LC)
• 10GBASE-ZR/ZW up to 80km reach over SMF (Duplex LC)
Note: Pluggable Transceivers thus denoted “*” are supported on the ERS 5632FD and 5698TFD/-PWR
models only.

IEEE & IETF Standards Compatibility

• IEEE 802.1D Spanning Tree Protocol • RFC 2131 BootP/DHCP Relay Agent
• IEEE 802.1p Prioritizing • RFC 2236 IGMPv2
• IEEE 802.1Q VLAN Tagging • RFC 2328 OSPF v2
• IEEE 802.1X EAPoL • RFC 2453 RIP v2
• IEEE 802.1ab Link Layer Discovery Protocol • RFC 2474 DiffServ
• IEEE 802.3 Ethernet • RFC 2475 DiffServ
• IEEE 802.3u Fast Ethernet • RFC 2665 Ethernet MIB
• IEEE 802.3x Flow Control • RFC 2674 Q-BRIDGE-MIB
• IEEE 802.3z Gigabit Ethernet • RFC 2737 Entity MIBv2
• IEEE 802.3ab Gigabit Ethernet over Copper • RFC 2819 RMON MIB
• IEEE 802.3ad Link Aggregation • RFC 2863 Interfaces Group MIB
• RFC 768 UDP • RFC 2865 RADIUS
• RFC 791 IP • RFC 2866 RADIUS Accounting
• RFC 792 ICMP • RFC 3046 DHCP Relay Agent Information Option
• RFC 793 TCP • RFC 3164 BSD Syslog Protocol
• RFC 826 ARP • RFC 3315 DHCP for IPv6
• RFC 854 Telnet • RFC 3410 SNMPv3
• RFC 894 IP over Ethernet • RFC 3411 SNMP Frameworks
• RFC 951 BootP • RFC 3412 SNMP Message Processing
• RFC 1058 RIP v1 • RFC 3413 SNMPv3 Applications
• RFC 1112 IGMPv1 • RFC 3414 SNMPv3 USM
• RFC 1157 SNMP • RFC 3415 SNMPv3 VACM
• RFC 1213 MIB-II • RFC 3576 RADIUS
• RFC 1271 RMON • RFC 3917 IP Flow Information Export
• RFC 1350 TFTP • RFC 3993 DHCP Subscriber-ID sub-option
• RFC 1493 Bridge MIB • RFC 3954 NetFlow Services Export v9
• RFC 1583 OSPF v2 • RFC 4022 TCP MIB
• RFC 1757 RMON • RFC 4113 UDP MIB
• RFC 1850 OSPF v2 MIB • RFC 4293 IPv6
• RFC 1945 HTTP v1.0 • RFC 4673 RADIUS Dynamic Authorization Server MIB

7
 Specifications (cont.)
Safety Agency Approvals
• Global basis for certification: EN 60950 current edition with CB national member deviations
• Mexico: complies with NOM

Electromagnetic Emissions & Immunity

• Global basis for certification: CISPR 22 Class A & CISPR 24, IEC 60950 with CB member national deviations
• US: complies with FCC CFR47 Part 15
• Canada: complies with ICES Class A
• Europe: complies with EN 55022 Class A; EN 55024; EN 300386 V1.3.3 Class A
• European Union & EFTA: complies with EN 55022; EN 55024; EN 61000-3-2; EN 61000-3-3
• Japan/Nippon: complies with VCCI
• Taiwan: complies with BSMI CNS 13428 & 14336, Class A
• Korea: complies with MIC Class A

Warranty
• Lifetime Next-Business-Day hardware replacement
• Lifetime Basic Technical Support
• 90-Day Advanced Technical Support
• Optional Software Release Service also available: GW5300ASG / GW6300ASG

Country of Origin
• China (PRC)

About Avaya
Avaya is a global leader in enterprise communications systems. The company
provides unified communications, contact centers, and related services directly
and through its channel partners to leading businesses and organizations
around the world. Enterprises of all sizes depend on Avaya for state-of-the-art
communications that improve efficiency, collaboration, customer service and
competitiveness. For more information please visit www.avaya.com.

© 2010 Avaya Inc. All Rights Reserved.

Avaya and the Avaya Logo are trademarks of Avaya Inc. and are registered in the United States and other countries.
All trademarks identified by ®, TM or SM are registered marks, trademarks, and service marks, respectively, of Avaya Inc. avaya.com
All other trademarks are the property of their respective owners. Avaya may also have trademark rights in other terms used herein.
References to Avaya include the Nortel Enterprise business, which was acquired as of December 18, 2009.
03/10 • DN5098-01