Hematoxylin and Eosin Staining
Hematoxylin and Eosin Staining
10
Notes
HEMATOXYLIN AND EOSIN
STAINING
10.1 INTRODUCTION
The sections, as they are prepared, are colourless and different components
cannot be appreciated. Staining them by different coloured dyes, having
affinities of specific components of tissues, makes identification and study of
their morphology possible. Hematoxylin and Eosin (H&E) is the most frequently
used stain in histology.
OBJECTIVES
After reading this lesson, you will be able to:
z describe Hematoxylin and its preparation
z describe the properties of Hematoxylin
z explain Eosin and its preparation
z describe the method of staining.
10.2 HEMATOXYLIN
It is extracted from the bark of a tree”, hematoxylom campechianum”. The
hematoxylin which we buy is extracted from this bloodwood tree. To obtain the
bark of freshly logged tree is chipped off, then boil the chips in water. An orange
red solution is obtained, which turns yellow, then black on cooling. The water
is evaporated leaving crude hematoxylin. Further purification is done.
Solutions of the dye should be oxidized to retain its staining ability longer. The
dye may be oxidized by exposure to the natural light for 3-4 months. Chemical
Histology and Cytology oxidation is achieved by using either sodium iodate or mercuric oxide. The
chemical oxidation converts the dye almost instantaneously but the product does
not have shelf life. Sodium iodate is most commonly used oxidizing agent (0.2
gm oxidizes 1.0 gm hematoxylin).
Hematoxylin is neither a dye nor it has coloring properties. For nuclear staining
it is necessary to oxidize the hematoxylin to hematin which is a weak anionic
Notes purple dye. Anionic hematin will have no affinity for the nucleic acids of nuclei.
Hence a metallic salt or mordant is combined with hematoxylin so that a positive
charge to the dye is obtained by virtue of the metal action. Thus the cationic dye
–metal complex will bind to the anionic nuclear chromatin. Various mordants
are ammonium or potassium alum ferric salt, chrom alum and phosphotungstic
acid. The tissue component most frequently demonstrated is nuclear chromatin
using an alum mordant in the H&E staining method.
Regressive staining - In this method the tissue is overstained and then destained
(differentiate) until the proper endpoint is reached.
The hematoxylin alum gives a reddish hue to the tissues because of acidic pH.
To convert this colour to the final blue, alkaline pH is required. This process is
called “blueing”. It is done either by tap water or by ammonium hydroxide.
Ingredients :
Hematoxylin 5gm
Absolute alcohol 50ml
Ammonium alum 100gm
Distilled water 1000ml Notes
Mercuric oxide 2.5gm
Glacial acetic acid 40ml
Method - Dissolve the hematoxylin in absolute alcohol and ammonium alum
in hot water. Mix the two solutions and heat to boiling. Remove from flame, and
add mercuric oxide and cool rapidly. Glacial acetic acid if added gives brisk
nuclear staining, but life of the solution is reduced. Hence if acetic acid is to be
added, it should be added in working solution.
10.4 EOSIN
Eosin is used as the counterstain that stains the cytoplasm rose coloured. The
intensity of the eosin is individual choice. The most widely used eosin is “eosin
Y”. The “Y” stands for yellowish. It is available in either water soluble or alcohol
soluble form. Most laboratories use the water soluble form of eosin Y in an
alcohol-water solution which is described here.
Eosin Y (water soluble) 1.0gm
Distilled water 80ml
Note
1. At no stage of staining the section should be dry
2. H&E is a regressive stain in which a tissue is over-stained and then excess
dye is removed to obtain desired intensity of stain
3. Filter Hematoxylin each time before staining
4. Change most of alcohol and xylene each time before staining
TERMINAL QUESTIONS
1. Explain the properties of hematoxylin
2. Explain preparation of hematoxylin and Eosin
3. Describe briefly H & E staining
10.1
1. Hematoxylin & Eosin
2. Sodium iodate
Notes
3. Nuclear chromatin
4. Hematoxylin lake
5. Regressive
6. Differentiation
7. Blueing
8. Eosin