MEDICAL IMAGING Technical

Documentation
Order No.: DD+DIS174.01E
CURIX Capacity Plus
*1UO5NV1*
1 piece UO5NV MA 1
Type 5100 / 5105

2nd Supplement

Please file this Supplement in your Technical Documentation as follows:

• Section 0: Replace the Order List

• Section 6.10.12: Remove DD+DIS034.92E
Add DD+DIS174.01E

Contents of the supplement

• Section 6.10.12: Installation Instructions for the "Data Printer Kit" Option

printed in Germany 08 / 2001

 Order List for Documentation

CURIX Capacity Plus

Type 5100 / 5105

The enclosed Order List replaces all previous versions. Take the previous version from your Service
Documentation and file the enclosed Order List in your Service Documentation front of Chapter 1.

The complete Service Documentation may be ordered by specifying the respective order number or
the machine name via:
Telephone: xx49 - (0)89 - 6207 - 3553
Fax: xx49 - (0)89 - 6207 - 7271

Edition Revision Order Number Contents

3 2 DD+DIS024.92E Complete Service Documentation in a folder

This documentation includes all the previously

published documentation

List of all Supplements:

Upon requirement all supplements can be ordered again individually by the respective order numbers.
When you order a supplement, the enclosed order list may already be outdated by another supplement. In this case keep
the one with the higher revision number in your Service Documentation.

Edition Revision Order Number Contents

3 0 DD+DIS062.96E Section 6.8: Maintenance instruction, 2nd Edition, replaces
DD+DIS074.93E
3 0 DD+DIS091.96E Section 5: Functional Discribtion, Supplement:
Timerfunction; Program-Version: >CA2_2108
3 0 DD+DIS092.96E Section 6.6: Creating a device disk - Loading a program
version - Initialising the RK188+
3 0 DD+DIS022.97E Section 6.5: General Circuit Diagrams
3 0 DD+DIS088.97E Section 2: Installation and Startup
3 0 DD+DIS097.97E Installation Instruction for the humdifier , replaces
DD+DIS025.97E
3 0 DD+DIS095.98E Supplement: Section 6.3
3 0 DD+DIS054.99M Spare parts list 4th edition
3 1 DD+DIS229.00E Supplement: Section 6.3
3 2 DD+DIS174.01E Supplement Section 6.10.12: Installation Instructions for the
"Data Printer Kit" (replaces DD+DIS034.92E)

Edition 3, Revision 2 CURIX Capacity Plus Section 0 / 1

(Type 5100 / 5105)
Order List for Documentation

The following sections of the documentation may be ordered separately:

Edition Revision Order Number Contents

3 0 DD+DIS050.91E Installation planning for Curix Filmcenter, 1st edition
3 0 DD+DIS112.91E Exercise book (english)
3 0 DD+DIS112.91S Exercise book (spanish)
3 0 DD+DIS112.91I Exercise book (italian)
3 0 DD+DIS901.92E Operating instruction
3 0 DD+DIS062.96E Section 6.8: Maintenance instruction, 2nd Edition, replaces
DD+DIS074.93E
3 0 DD+DIS057.93E User`s manual for CD-I (english)
3 0 DD+DIS057.93S User`s manual for CD-I (spanish)
3 0 DD+DIS057.93I User`s manual for CD-I (italian)
3 0 DD+DIS054.99M Spare parts list, 4th edition

The following Field Service Bulletins have been published until now:
rd
The following FSBs have been published for the Service Documentation, 3 edition and may be ordered individually with the
respective order number.

FSB Order Number Contents

No. 1 DD+DIS032.94E Problems with the Unlocking Solenoids, Solenoid Valves and the
Empty Detection in the Rapid Feeder
No. 2 DD+DIS044.94E Safety instructions for lifting the transport section
No. 3 DD+DIS006.98M Wrong wiring of the adapter for the connection of the humidifier
(5230/510, 5234/510)!
No. 4 DD+DIS019.98E All Film Handling Modules
No. 5 DD+DIS028.98M Ligth Seal at the Steam Gate
No. 6 DD+DIS018.99M Modified hose system and screw fitting of the pressure system
No. 7 DD+DIS218.00E Scratches on the Film
This Field Service Bulletin is available in the following languages:
German, English, French, Spanish, Italian
No. 8 DD+DIS329.00E Modification of the erasable, programmable logic device (EPLD) in the
RK188+
No. 9 DD+DIS358.00E IOBSTEP Stepper Motor Boards
CM+9.9499.6730.3 / CM+9.9499.3230.6

Section 0 / 2 CURIX Capacity Plus Edition 3, Revision 2

(Type 5100 / 5105)
 Order List for Documentation

Service Documentation for this machine is also available on CD.

OMNI CD:

• The OMNI CD is published every three months always at the beginning of the quarter.
• The Munich Warehouse always sends the newest release.

Explanation of the order number:

DD+OMNI-MI-.. this part of the order number always remains the same. The two
following numbers indicate the release number.
Example: You have Release 09 with order number: DD+OMNI-MI-09
You order now the next higher release with
order number: DD+OMNI-MI-10

Edition 3, Revision 2 CURIX Capacity Plus Section 0 / 3

(Type 5100 / 5105)
Checklist for Completeness
CURIX Capacity Plus (Type 5100 / 5105)

Section Edition Revision Order Number / Designation Pages

0 3 0 DD+DIS024.92E Cover sheet and list of contents (A3)
3 2 Order list 0/1-3
3 2 Checklist for completeness 0/4
3 2 General Information 0/5
1 3 0 DD+DIS050.91E 1/I, 1/1-40
2 3 0 DD+DIS068.97E 2/I, 2/1-33
0 DD+DIS091.93E 2/1-12
3 3 0 DD+DIS073.94E 3.1/I, 3.1/1-5
4 - - - -
5 3 0 DD+DIS024.96E 5/1-10
0 DD+DIS091.96E 5/I; 5/11-29
6.1 3 0 DD+DIS044.94E 6.1/I; 6.1/1-5
6.2 3 0 DD+DIS024.92E 6.2/I; 6.2/1-4
6.3 3 0 DD+DIS095.98E 6.3/I; 6.3/1-36, 39-45
1 DD+DIS229.00E 37-38
6.4 3 0 DD+DIS024.92E 6.4/5-6, 9-14
0 DD+DIS038.93E 7-8
0 DD+DIS058.94E 1-6
0 DD+DIS059.94E 6.4/I; 1-4, 15-16
6.5 3 0 DD+DIS024.92E 3-4
0 DD+DIS072.92E 9
0 DD+DIS012.93E 5-8
0 DD+DIS038.93E 10
0 DD+DIS078.94E 11-14
0 DD+DIS022.97E 6.5/I
6.6 3 0 DD+DIS020.92E 1-16
DD+DIS092.96E 6.6/I-II; 17-22
6.7 3 0 DD+DIS038.93E 6.7/I; 1
6.8 3 0 DD+DIS062.96E 1-31; Checkliste 1-8
6.9 3 0 DD+DIS056.94E 6.9/I; 1-11
6.10.1 - - - -
6.10.2 3 0 DD+DIS095.92E 6.10.2/I; 1-14
0 DD+DIS002.95E 17-19
0 DD+DIS047.93E 15-16
6.10.3 3 0 DD+DIS057.94E 6.10.3/I; 3-6
0 DD+DIS036.93E 1-2
6.10.4 3 0 DD+DIS036.93E 1-2
0 DD+DIS035.94E 3-4
0 DD+DIS060.94E 6.10.4/I; 5-9
0 DD+DIS002.95E 11
6.10.5 3 0 DD+DIS020.93E 1-2; 4
0 DD+DIS035.94E 3
0 DD+DIS002.95E 5
6.10.6 3 0 DD+DIS072.92E 6.10.6/I; 1-6
0 DD+DIS047.93E 7-8
0 DD+DIS002.95E 9-10
6.10.7 3 0 DD+DIS020.93E 1-2, 5-6

Section 0 / 4 CURIX Capacity Plus Edition 3, Revision 2

(Type 5100 / 5105)
 Checklist for Completeness

0 DD+DIS036.93E 3-4
0 DD+DIS017.94E 7-12
0 DD+DIS064.94E 6.10.7/I; 13-38
0 DD+DIS002.95E 39
6.10.8 3 0 DD+DIS003.94E 1-6
0 DD+DIS033.94E 1-43
6.10.9 - - - -
6.10.10 - - - -
6.10.11 3 0 DD+DIS005.94E 6.10.11/I; 1-16
6.10.12 3 2 DD+DIS174.01E 6.10.12/I; 1-7
7 3 0 DD+DIS054.99M 7/V; 1-48
8 3 0 DD+DIS097.97E 8/I, 1-10
9 3 0 DD+DIS007.98E 9/I, 1-12
10 3 0 DD+DIS036.93E 1-2
11 - - - -
Nr. 2 - DD+DIS044.94E 1
Nr. 3 - DD+DIS006.98M 1-4
Nr. 4 - DD+DIS019.98E 1-5
Nr. 5 - DD+DIS028.98M 1-4
Nr. 6 - DD+DIS018.99M 1-10
Nr. 7 - DD+DIS218.00E 1
Nr. 8 - DD+DIS329.00E 1-2
Nr. 9 - DD+DIS358.00E 1-3

Edition 3, Revision 2 CURIX Capacity Plus Section 0 / 5

(Type 5100 / 5105)
General Information

Proceed as follows to check if the present documentation

is up to date and complete

If you want to check whether your documentation is on the newest level, order the order list and the
checklist for completeness as follows:

• INTERNET: DIGINET:
http://www.DigiNet-Agfa.de
Database "General" Forum "Doc Order List"

To view this Internet page you need a user ID and a

password. If you have no access authorization, please
log in as "New User" and apply for a User ID and a
password via e-mail.
If you have problems with your access to DigiNet
please turn to our DigiNet Administrator under the
following e-mail address:
[email protected]

• Fax: As an alternative you may order the order list and the checklist
for completeness by specifying the product name and sending
your request to the following fax number:
+49 - 89 - 6207 - 7271 / 7455

Section 0 / 6 CURIX Capacity Plus Edition 3, Revision 2

(Type 5100 / 5105)
 MEDICAL IMAGING Technical
Documentation

Order No: DD+DIS174.01E

CURIX Capacity plus

*1UO5NV1*
1 piece UO5NV MA 1
Type 5100 / 5105

Installation Instructions for the

"Data Printer Kit" Option
Type 5100/500" ABC Code FS6N6
An enclosure (DD+DIS145.01E) is also enclosed to the accessory.

This enclosure describes the retrofitting of the "Data Printer Kit" option.“

Required time:
approx. 10 minutes

printed in Germany 08 / 2001

5100 / 5105 DD+DIS174.01E

List of Contents

1 General information / scope of delivery .................................... 3

2 Subsequent installation of a data printer.................................. 3
2.1 Installation..................................................................................... 3
2.2 Removal........................................................................................ 4
2.3 Inserting or replacing a paper roll.................................................. 4
3 Adjusting the printer function .................................................... 5
4 Starting the operation................................................................. 5
5 Basic functions of the Control Board........................................ 6
5.1 Input signals.................................................................................. 6
5.2 Main functions............................................................................... 6
5.3 Output signals ............................................................................... 6
5.4 Switch codes................................................................................. 6
5.5 Potentiometer setting .................................................................... 6

Section 6.10.12 / 2 CURIX Capacity Plus Revision 2

(Type 5100 / 5105)
DD+DIS174.01E 5100 / 5105

1 General information / scope of delivery

The "data printer kit" is pre-assembled prior to shipment and only needs to
be inserted and connected.

Scope of delivery:
Type 5100/500 ABC Code FS6N6 Order number Qty
Printer assembled - 1
Roll of thermal paper CM+7.0374.8901.0 2
Enclosure DD+DIS145.01D/E/F/I/S 1

2 Subsequent installation of a data printer

Prior to the modification always switch the machine off!

2.1 Installation
(1) Take off the cover rail below the cassette section (only held by
magnetic snap locks).
(2) Hold the printer connection cable on the left of the printer housing and
slide the printer (A) into the guide rails up to the stop position. Pull up
the locking pin (C) and push the printer fully into the machine.
(3) Plug the printer connection cable into the free plug of the I/O bus
system.
(4) Insert a paper roll (B), push the printer in, and mount the cover rail.
(5) Switch the machine on.
(6) Press reset to activate the printer node.

Figure 1

Revision 2 CURIX Capacity Plus Section 6.10.12 / 3

(Type 5100 / 5105)
5100 / 5105 DD+DIS174.01E

2.2 Removal
(1) Remove the top magazine.
(2) Take off the cover rail below the cassette section (only held by
magnetic snap locks).
(3) Pull the printer (A) (see figure 1).out to stop position.
(4) Press up the locking pin (C) (see figure 1), reach in through the first
magazine drawer.
(5) Remove the printer.
(6) Unplug the connection cable at the printer board or at the I/O bus.

2.3 Inserting or replacing a paper roll

Figure 2

(1) Remove the cover (1) which is held by magnets, at the front.
(2) Pull the printer forward to the stop position (2).
(3) Open the guides (3), insert the new paper roll (A) and thread the paper.
Then press button (B) for the paper advance until the paper is fully
threaded and a couple of inches are visible. Close the guides and insert
the paper between the guides.
(4) Slide the printer back into the machine.
(5) Mount the cover rail again.
(Position the power supply cable (4) for the cassette section correctly.)

Section 6.10.12 / 4 CURIX Capacity Plus Revision 2

(Type 5100 / 5105)
DD+DIS174.01E 5100 / 5105

3 Adjusting the printer function

The data print-out can be requested via the touch-type keyboard by means
of the M and S keys.
Use the M key to select the required statistics.
Confirm the selected print function with the S key.
Procedure:
(1) Turn the machine on.
The machine changes to ready status "OK 2min".
Activated key Display

Press the M key PRINTER

NO => M YES => S
Press the S key FILMS / WEEKDAY
PRINT => S
Press the M key FILMS / MONTH
(or - FILMS / YEAR - FILMS /
TOTAL - ACTIVATION TIMES)
Press the S key OK
PRINT
Selected statistics will be printed!

4 Starting the operation

It is not necessary to install the printer in the software. This function is

automatically carried out when the machine is switched on or with a reset.
Correct installation can be verified in the VD "System Setup".

Revision 2 CURIX Capacity Plus Section 6.10.12 / 5

(Type 5100 / 5105)
5100 / 5105 DD+DIS174.01E

5 Basic functions of the Control Board

5.1 Input signals

Power supply, print data, and control signals via the I/O bus system plug
ST1 (F) (see figure 3).
5.2 Main functions
Preparation of the printer data and data output to the integrated thermal
printer.
5.3 Output signals
Power supply of the thermal printer via the plug ST3 (A), data line via plug
ST2 (B) (see figure 3).
5.4 Switch codes
Wire strap switch S1 (E) = board address
1 2 3 4
off off off on
Jumper ST4 to ST6 (C) = character set

The number of characters/line is adjusted by jumpers depending on the

print unit (factory setting).
ST5 ST4 ST6
on off on
Button S2 (D) is for the paper transport during the threading of the paper
roll (see figure 3).
5.5 Potentiometer setting
The potentiometer R26 is for the adjustment of the print density. The
factory-set potentiometer adjustment should not be changed.

Section 6.10.12 / 6 CURIX Capacity Plus Revision 2

(Type 5100 / 5105)
DD+DIS174.01E 5100 / 5105

Figure 3
A Connector (ST3) for the power supply of the printer motor
B Connector (ST2) for the data lines of the print head
C Jumper (ST4 to ST6) for the number of characters/line according to
print unit
D Button (S2) for the paper transport during threading
E Wire strap switch (S1) for the board address
F Connector (ST1) for the I/O bus system
G Potentiometer for adjustment of the density

Revision 2 CURIX Capacity Plus Section 6.10.12 / 7

(Type 5100 / 5105)