Scribd
Upload
60 views5 pages

Post Logs

The document contains output from several DSP commands on a signaling system. It provides status information on a DSP with index 70, two associated M3UA links, two SCTP links with IDs 49 and 50, an IP path with adjacent node ID 1900, and ping statistics for four IP addresses on the network. All statuses are reported as normal, available, or not congested.

Uploaded by

dineshraj69
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
60 views5 pages

Post Logs

The document contains output from several DSP commands on a signaling system. It provides status information on a DSP with index 70, two associated M3UA links, two SCTP links with IDs 49 and 50, an IP path with adjacent node ID 1900, and ping statistics for four IP addresses on the network. All statuses are reported as normal, available, or not congested.

Uploaded by

dineshraj69
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 5

DSP N7DPC:DPX=70,TOSPECSSN=NO;

EKRH2
+++ EKRH2 2020-01-28 23:06:31
O&M #14818471
%%/*1880751399*/DSP N7DPC: DPX=70,TOSPECSSN=NO;%%
RETCODE = 0 Execution succeeded.

DSP information(M3UA)
---------------------
DSP index = 70
DSP name = NNMLRN2
DSP type = IUR
DSP NI = National standby network
DSP code = H'129(297)
SCCP DSP state = Accessible
Time of SCCP DSP status changed = 2020-01-28 23:04:49
Cause of SCCP DSP status changed = SCCP DPC status changed by MTP_RESUME_IND.
Peer SCCP state = Available
SCCP DSP congested state = Not congested
M3UA DSP congested state = Not congested
M3UA DSP state = Available
Time of M3UA DSP status changed = 2020-01-28 23:04:49
Cause of M3UA DSP status changed = Route change.
(Number of results = 1)

--- END

DSP M3LNK:DSPT=BYDSP,DPX=70;
EKRH2
+++ EKRH2 2020-01-28 23:06:46
O&M #14818476
%%/*1880751400*/DSP M3LNK: DSPT=BYDSP,DPX=70;%%
RETCODE = 0 Execution succeeded.

M3UA linkset state


------------------
Signalling linkset index = 70
Subrack No. = 1
Slot No. = 2
Subsystem No. = 2
Signalling link ID = 0
Operation state = Activated state
Administrative state = M3UA uninhibited
Manual activate flag = Manual activated
Congested state = Not congested
Time of M3UA link operation state switch = 2020-01-28 23:04:48
Reason of M3UA link operation state switch = M3uaLink receive AspActive.
Local Network ID = National standby network
Peer Network ID = <NULL>
Local Traffic Mode = Load Sharing Mode
Peer Traffic Mode = <NULL>
Local OSP Code = H'FE(254)
Peer DSP Code = <NULL>
Local DSP Code = H'129(297)
Peer OSP Code = <NULL>
Local Entity Routing Context on the Local End = 4294967295
Destination Entity Routing Context on the Peer End = <NULL>
Destination Entity Routing Context on the Local End = 4294967295
Local Entity Routing Context on the Peer End = <NULL>

Signalling linkset index = 70


Subrack No. = 1
Slot No. = 4
Subsystem No. = 1
Signalling link ID = 1
Operation state = Activated state
Administrative state = M3UA uninhibited
Manual activate flag = Manual activated
Congested state = Not congested
Time of M3UA link operation state switch = 2020-01-28 23:05:34
Reason of M3UA link operation state switch = M3uaLink receive AspActive.
Local Network ID = National standby network
Peer Network ID = <NULL>
Local Traffic Mode = Load Sharing Mode
Peer Traffic Mode = <NULL>
Local OSP Code = H'FE(254)
Peer DSP Code = <NULL>
Local DSP Code = H'129(297)
Peer OSP Code = <NULL>
Local Entity Routing Context on the Local End = 4294967295
Destination Entity Routing Context on the Peer End = <NULL>
Destination Entity Routing Context on the Local End = 4294967295
Local Entity Routing Context on the Peer End = <NULL>
(Number of results = 2)

--- END

DSP SCTPLNK:SCTPLNKID=49;
EKRH2
+++ EKRH2 2020-01-28 23:07:11
O&M #14818477
%%/*1880751401*/DSP SCTPLNK: SCTPLNKID=49;%%
RETCODE = 0 Execution succeeded.

SCTP link state


---------------
Slot No. = 2
Subsystem No. = 2
SCTP link ID = 49
Operation state = Normal
State Changed Time = 2020-01-28 23:04:48
State Changed Cause = Establish succeeded.
Transmission Buffer Used = 0%
The Primary Destination IP Address = 10.245.251.27
Number of Accumulated Received Init Messages = 1
Last Time for Receiving Init Messages = 2020-01-28 23:04:48
Output Port Information =
(Subrack:0,Slot:19,Port:3,Type:ETHPORT,IP:10.247.84.8)
(Number of results = 1)

--- END
DSP SCTPLNK:SCTPLNKID=50;
EKRH2
+++ EKRH2 2020-01-28 23:07:19
O&M #14818479
%%/*1880751403*/DSP SCTPLNK: SCTPLNKID=50;%%
RETCODE = 0 Execution succeeded.

SCTP link state


---------------
Slot No. = 4
Subsystem No. = 1
SCTP link ID = 50
Operation state = Normal
State Changed Time = 2020-01-28 23:05:34
State Changed Cause = Establish succeeded.
Transmission Buffer Used = 0%
The Primary Destination IP Address = 10.245.251.60
Number of Accumulated Received Init Messages = 1
Last Time for Receiving Init Messages = 2020-01-28 23:05:34
Output Port Information =
(Subrack:0,Slot:19,Port:3,Type:ETHPORT,IP:10.247.84.8)
(Number of results = 1)

--- END

DSP IPPATH:ANI=1900;
EKRH2
+++ EKRH2 2020-01-28 23:07:36
O&M #14818481
%%/*1880751404*/DSP IPPATH: ANI=1900;%%
RETCODE = 0 Execution succeeded.

IP PATH state
-------------
Adjacent node ID = 1900
IP path ID = 1
Operation state = Available
Forward congestion type = Not congested
Backward congestion type = Not congested
PING test = Off
Number of PING test package sent = 0
Number of PING test package received = 0
Number of PING test package lost = 0
Average time delay[ms] = 0
Time delay variations[ms] = 0
Available forward bandwidth of path [kbit/s] = 976065
Available backward bandwidth of path [kbit/s] = 982274
Used forward bandwidth of path [kbit/s] = 1438
Used backward bandwidth of path [kbit/s] = 1162
Configured forward bandwidth of path [kbit/s] = 1000000
Configured backward bandwidth of path [kbit/s] = 1000000
Path Operate status last changed time = 2019-12-12 00:26:27
Path Operate status last changed cause = Bearing port available.
Fault cause = NULL
Block Status = Unblocked
Output Port Information =
(Subrack:0,Slot:19,Port:3,Type:ETHPORT,IP:10.247.84.8)
Transmission detection enhancement status = NULL
(Number of results = 1)

--- END

PING IP:SIPADDR="10.247.84.8",DESTIP="10.245.251.27",CONTPING=NO;
EKRH2
Reply from 10.245.251.27: bytes=256 Sequence=1 ttl=58 time=3 ms
Reply from 10.245.251.27: bytes=256 Sequence=2 ttl=58 time=3 ms
Reply from 10.245.251.27: bytes=256 Sequence=3 ttl=58 time=3 ms
Reply from 10.245.251.27: bytes=256 Sequence=4 ttl=58 time=3 ms
--- 10.245.251.27 ping statistics ---
4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 3/3/3 ms
10 reports in total
(Number of results = 1)

--- END

PING IP:SIPADDR="10.247.84.8",DESTIP="10.245.251.60",CONTPING=NO;
EKRH2
Reply from 10.245.251.60: bytes=256 Sequence=1 ttl=58 time=3 ms
Reply from 10.245.251.60: bytes=256 Sequence=2 ttl=58 time=3 ms
Reply from 10.245.251.60: bytes=256 Sequence=3 ttl=58 time=3 ms
Reply from 10.245.251.60: bytes=256 Sequence=4 ttl=58 time=3 ms
--- 10.245.251.60 ping statistics ---
4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 3/3/3 ms
10 reports in total
(Number of results = 1)

--- END

PING IP:SIPADDR="10.247.84.8",DESTIP="10.245.251.107",CONTPING=NO;
EKRH2
Reply from 10.245.251.107: bytes=256 Sequence=1 ttl=58 time=3 ms
Reply from 10.245.251.107: bytes=256 Sequence=2 ttl=58 time=1 ms
Reply from 10.245.251.107: bytes=256 Sequence=3 ttl=58 time=1 ms
Reply from 10.245.251.107: bytes=256 Sequence=4 ttl=58 time=3 ms
--- 10.245.251.107 ping statistics ---
4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 1/2/3 ms
10 reports in total
(Number of results = 1)

--- END

PING IP:SIPADDR="10.247.84.8",DESTIP="10.245.251.108",CONTPING=NO;
EKRH2
Reply from 10.245.251.108: bytes=256 Sequence=1 ttl=58 time=3 ms
Reply from 10.245.251.108: bytes=256 Sequence=2 ttl=58 time=1 ms
Reply from 10.245.251.108: bytes=256 Sequence=3 ttl=58 time=1 ms
Reply from 10.245.251.108: bytes=256 Sequence=4 ttl=58 time=1 ms
--- 10.245.251.108 ping statistics ---
4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 1/1/3 ms
10 reports in total
(Number of results = 1)

--- END

PING IP:SIPADDR="10.247.84.8",DESTIP="10.245.251.109",CONTPING=NO;
EKRH2
Reply from 10.245.251.109: bytes=256 Sequence=1 ttl=58 time=3 ms
Reply from 10.245.251.109: bytes=256 Sequence=2 ttl=58 time=1 ms
Reply from 10.245.251.109: bytes=256 Sequence=3 ttl=58 time=1 ms
Reply from 10.245.251.109: bytes=256 Sequence=4 ttl=58 time=1 ms
--- 10.245.251.109 ping statistics ---
4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 1/1/3 ms
10 reports in total
(Number of results = 1)

--- END

PING IP:SIPADDR="10.247.84.8",DESTIP="10.245.251.110",CONTPING=NO;
EKRH2
Reply from 10.245.251.110: bytes=256 Sequence=1 ttl=58 time=1 ms
Reply from 10.245.251.110: bytes=256 Sequence=2 ttl=58 time=1 ms
Reply from 10.245.251.110: bytes=256 Sequence=3 ttl=58 time=1 ms
Reply from 10.245.251.110: bytes=256 Sequence=4 ttl=58 time=1 ms
--- 10.245.251.110 ping statistics ---
4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 1/1/1 ms
10 reports in total
(Number of results = 1)

--- END

You might also like