412 - 1412

CONTROL VALVES
 Type
Presentación de la compañía
412
HISTORY Over fifty years experience in fluid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling,
machine-tool and food machinery. Main supplier to the Spanish market with rapidly increasing presence in European and world markets.

TECHNOLOGY Roquet has a large design and development department with substantial fatigue, noise, corrosion-resistance, cleanliness and testing
facilites, backed by a well-equipped metallurgical laboratory.

RELIABILITY A broad range of robust products: designed to perform, built to last. All products ranges life-tested under realistic conditions during
development to ensure their suitability for use in applications such as tractors, fork-lift trucks, loaders, excavators, cranes, dumpers, dock-levellers...
Each and every product tested to a stringent test specification prior to shipment.

CAPABILITY 400 well trained empoyees. Four factories with a total floor area of 30.000m² Current production 180.000 pumps, 300.000 control valve
bodies, 500.000 cylinders and 30.000 power packs per year. Distribution network in over 35 countries.

2
 Type
412
This range of directional control valves is primarily intended for applications such as construction, material handling and agricultural machinery etc.

The valves are actuated by hand-levers, pneumatic operated, cable operated, etc.

Auxiliary valves can be fitted in each port.

Index

Technical data ..................................................................................................................................................................... 4

Directional control valve curves ....................................................................................................................................... 5-6
Directional control valve dimensions ............................................................................................................................... 7
Directional control valve, general view ............................................................................................................................ 8
Hydraulic circuit ................................................................................................................................................................. 8
Identification control valve parts .......................................................................................................................................... 9
Coding system ........................................................................................................................................................... 10-11-12
Inlet section details
Main relief valve and unloading valve ............................................................................................................................. 13
Unloading valve (electric - hydraulic) .............................................................................................................................. 14
Operating section details
Spool types ...................................................................................................................................................................... 15
Spool positions kits ..................................................................................................................................................... 16-17
Operators .................................................................................................................................................................... 17-18
Auxiliary valves ........................................................................................................................................................... 19-20
Rotative operator ............................................................................................................................................................. 21
Multiple rotative operator ................................................................................................................................................ 22
Direct solenoid operated section ............................................................................................................................................ 23
Direct solenoid operated section with emergency operator ................................................................................................... 24
Pneumatic pilot ...................................................................................................................................................................... 25
Hydraulic pilot ........................................................................................................................................................................ 26
Pilot operated check valve ..................................................................................................................................................... 27
Additional sections
3 way flow control for directional control valves ..................................................................................................................... 28
Mid-outlet details
Mid-oulet scheme ............................................................................................................................................................ 29
Return configuration ............................................................................................................................................................... 30
Operating section details
Position microswitch ........................................................................................................................................................ 31
Request a ROQUET control valve ..................................................................................................................................... 32

This Catalogue shows the product in the most standard configuration; customized or special designs are also avaible, please contact to PEDRO
ROQUET S.A. The specifications and data in this catalogue are not open to any interpretation, please contact with PEDRO ROQUET S.A. in case of
doubt.
PEDRO ROQUET S.A. reserves the right to modify, update or revise this catalogue without prior notice.
PEDRO ROQUET S.A. IS NOT RESPONSABLE FOR ANY DAMAGE CAUSED BY AN INCORRECT USE OF THE PRODUCT.
3
 Type
Directional control valves
412

412

Technical data

CONTROL VALVES TYPE 412 1412

Ports A and B 3/8” G. 1/2” G.

Ports P and T 1/2” G. 1/2” G.

Maximum spool quantity 12

Spool diameter (mm) 15

Spool stroke (mm) 5

Type Parallel

Nominal flow 50 (l/min.) / 13 (US GPM)

Working max. pressure 350 bar / 5075 psi

Static spool 80 bar / 1160 psi

Return max. pressure
T port During spool positioning 20 bar / 290 psi

Spool force 18 Kg / 40 Lb

Fluid to be used ISO 6742 mineral-oil-based hydraulic fluid

Temperature range (NBR) -20ºC...+80ºC (-4º F...+176º F)

Viscosity range ISO 3448 CAT. VG22-VG68

Recommended fluid cleanliness 16/13 s./ ISO 4406 - NAS 10

4
 Type
Directional control valve curves
412

Diagrams

P→T
24 (348)
12
22 (319) 11
10
20 (290) 9
8
18 (260) 7
6
16 (230)
5
14 (200)
p=bar
(psi)

4
12 (175)

3
10 (145)

8 (115) 2

6 (85) 1

4 (60)

2 (30)
Relief valve
10 20 30 40 50 60 70 80
(2.6) (5.3) (7.9) (10) (13) (16) (19) (21) 250 (3625)
Q=L/min 230 (3335)
(US GPM)
210 (3045)
190 (2755)
170 (2465)

150 (2175)
p=bar

130 (1885)
(psi)

110 (1595)

90 (1305)
70 (1015)
50 (725)

30 (435)
10 (145)
10 20 30 40 50 60
(2.6) (5.3) (7.9) (10) (13) (16)
P→T2 Q=L/min
60 (870)
(US GPM)
12
11 Minimal pressure curve
10
50 (725) 9
8
7
6
40 (580)
5
p=bar
(psi)

4
30 (435)

20 (290) 2

10 (145)

10 20 30 40 50 60 70 80
(2.6) (5.3) (7.9) (10) (13) (16) (19) (21)
Q=L/min
(US GPM)

5
 Type
Directional control valve curves
412

P→A or B
24 (348)

22 (319)

20 (290)

18 (260)
12
16 (230) From 1 to 12 elements
1
14 (200)
p=bar
(psi)

12 (175)

10 (145)

8 (115)

6 (85)

4 (60)

2 (30)

10 20 30 40 50 60 70 80
(2.6) (5.3) (7.9) (10) (13) (16) (19) (21)
Q=L/min
(US GPM)

A or B→T2 1 Final section

34 (493)

32 (464) 21

30 (435)
321
28 (406)

26 (378) 4321

24 (348)
54321
22 (319)

20 (290) 654321
p=bar

7654321
(psi)

18 (260)

16 (230)
87654321
14 (200)

987654321
12 (175)

10 (145) 10 9 8 7 6 5 4 3 2 1

8 (115)
11 10 9 8 7 6 5 4 3 2 1
6 (85)

4 (60) 12 11 10 9 8 7 6 5 4 3 2 1 First section

2 (30)

10 20 30 40 50 60 70 80
(2.6) (5.3) (7.9) (10) (13) (16) (19) (21)
Q=L/min
(US GPM)

6
 Type
Directional control valve dimensions
412
°
ion 25° ª position 25

30 Nm
14º

Torque:
208

22 Lb-ft
4

14º

56
4ª posit

130
P

100,5

90
68
23 26

63
53
32,5
184 51

14,5
64 64 D
220

94 127

P1 T2
41,5
SPOOL DETAIL END

21
22 Ø9 H9
94 127

Ø15
7
8,3
72

Normal positions
11

Ø14,8
38,5

Mounting Holes Ø9 T T1

A B 5 (1 position) 5 (2 position)
38

(0 position)
E
C

A B
Special positions
38

P1 T2
42
23,5

10,2 (3 position) 9,4 (4 position)

(0 position)
73

P-P1 Pressure ports

A-B Work ports

FREE FLOW
NOTE:
Port A is always next to operator side even if the section is assembled with levers on the other side. T-T1-T2 All are tank ports

Spool count 1 2 3 4 5 6 7 8 9 10 11 12 POWER BEYOND

T Power
C (mm) 118 156 194 232 270 308 346 384 422 460 498 536
T1-T2 Tank port
D (mm) 116 154 192 230 268 306 345 382 420 458 496 534

E (mm) 146 184 222 260 298 336 374 412 450 488 526 564 CLOSED CENTER

Weight in kg 5 8 11 14 17 20 23 26 29 32 35 38 T Closed

Weight in Lb 11 17,5 24,3 31 37,5 44,3 51 57,5 64,3 71 77,5 84,3 T1-T2 Tank port

7
 Type
Directional control valve, general view
412

Spool position
Operator side
kit side

PLUG AUXILIARY VALVES AUXILIARY VALVES PLU

POWER BEYOND CLOSED CENTER

PLUG

PLUG ELECTRICAL UNLOADING VALVE RELIEF VALVE PLUG

DEUTSCH DT04 CONNECTOR IP-67

PLUG

Hydraulic circuit

Hydraulic scheme with Hydraulic scheme with main relief Hydraulic scheme with main relief
main relief valve. valve and auxiliary valves. valve and unloading valve.
T T1 T T1 T T1

A2 B2 A2 B2 A2 B2

A1 B1 A1 B1 A1 B1

P1 P T2 P1 P T2
P1 P T2

8
 Type
Identification control valve parts
412

4 Hand lever

7 Spool Mid oulet Oulet cover 2 Return

3 Spool position
Inlet cover

Auxiliary valve

6 Relief valve

9
 Type
Coding system
412

OPERATING SECTIONS 412 N 11 P A 12 D 24 L12 CODE

1 Control valve type

1 2 3 4 5 6 7 8 9 10
412 Port A - B 3/8” G.
1412 Port A - B 1/2” G.

2 Return configuration 5 Main relief valve position

N Open center both valves.

Z Power beyond both valves.
A C
C Closed center both valves.

3 Spool position kits Standard

2 Three positions with detent.

6 Auxiliary valve pressure range (pressure set al 22l/min.)
7 Two positions with detent, third position return by spring.

9 Two ends positions with detent. Adjustment Pressure Pressure

Adjustable Tamper-proof range bar range psi
11 Three positions return to neutral by spring.
11 41 5-80 (80) 70-1100 (1100)
Two positions, neutral and end position by detent,
14 12 42 85-175 (160) 1200-2500 (2200)
action pushing spool.
13 43 180-250 (200) 2600-3600 (2900)
20 Four positions three return by spring the fourth detented,
14 44 255-350 (315) 3700-5000 (4600)
pulling spool.
22 Three positions pneumatic pilot (see more inf. page 25). 00 Without cavity for valve.
Two positions, neutral and end position by detent,
24
action pulling spool.
Three positions. Central by spring and two end positions 7 Spool types
29
with detent.
Three positions. Rotative device with detent in neutral D 3 position, 4-way, double acting, A and B ports blocked in 0 position.
35
position.
3 position, 4-way, double acting, A and B ports open to tank
I in 0 position.
One end position and neutral position with detents,
36 action pushing spool; and other end position by spring, 3 position, 4 -way, double acting, A and B ports restricted to
U
action pulling spool. tank in 0 position.
71 Three positions hydraulic piloted (see more inf. page 24). 3 position, 3 -way, single acting, A port blocked in position 0,
S B port plugged.
One end position with detent, action pulling spool; Neutral 3 position, 3 -way, single acting, B port blocked in position 0,
74 and other end position by spring, action pushing spool. V A port plugged.
One end position with detent, action pushing spool; Neutral 4 position, 4-way, double acting, A and B port blocked in
75 L position 0, 4th position float.
and other end position by spring, action pulling spool.
Direct solenoid operated, three positions spring centered
83
(see more inf. page 21, 22). 8 D.C. VOLTAGE (Only for spool position kits 83, 84)
Direct solenoid operated, two positions (center + one end).
84
Solenoid side port A. (see more inf. page 21, 22). 12 12 V

24 24 V
4 Operators

X Mechanical joystick or special options.

9 With electrical unloading valve
Y Hydraulic pilot (see more inf. page 24).
P2 Lever box with lever and rubber boot. E12 DEUTSCH connector 12 V.
D2 Lever box with rubber boot, inverted 180º.
E24 DEUTSCH connector 24 V.
Z2 Lever box with rubber boot and without lever.
PI Extension lever box with rubber boot inverted 180º. L12 HIRSCHMANN connector 12 V.
T Spool end cap.
L24 HIRSCHMANN connector 24 V.
S Open spool end (no lever box).
Cable control. L0 Plug.
I
Electrical control with DEUTSCH connector without diode, HP Hydraulic piloted.
E only for 83, 84 spool position kit.
Emergency operator with DEUTSCH connector without
ME diode, only for 83, 84 spool position kit.
10 CODE
R Rotative operator.

10
 Type
Coding system
412

INLET SECTION 412 CV 11 24 S CODE

Control valve type

Code
412

Operative pressure port

Front cover type
S Side port (P1 plugged).
CV Front cover with relief valve.
T Top port (P plugged).
SV Front cover without relief valve.
With electrical unloading valve
Main relief valve pressure range standard (pressure set at 22l/min)
E12 DEUTSCH connector 12 V.
Adjustment Pressure Pressure
Adjustable Tamper-proof range bar range psi E24 DEUTSCH connector 24 V.
11 41 5-80 (80) 70-1100 (1100) L12 HIRSCHMANN connector 12 V.
12 42 85-175 (160) 1200-2500 (2200)
L24 HIRSCHMANN connector 24 V.
13 43 180-250 (200) 2600-3600 (2900)
14 44 255-350 (315) 3700-5000 (4600) L0 Plug.
00 Without main relief valve
(for SV front cover type) HP Hydraulic piloted.
00 Without cavity for unloading valve.

OUTLET SECTION 412 CF N S CODE

Code

Control valve type

Operative tank port
412
S Side port (T1 plugged).
A Turn around port (T plugged).
Outlet
Return configuration
CF Outlet cover.
N Open center.
Z Power beyond.
C Closed center.

MID-OUTLET SECTION 412 CIA N S CODE

Code
Control valve type

Operative tank port

412

S Side port (T plugged).

A Turn around port (T and T1 plugged).
Control valve type
T Top port (T1 plugged).
CIA Side port in A side.
00 For closed center or power beyond.
CIB Side port in B side.
Return configuration

NOTE 1: N Open center both valves.

CIA and CIB its the same components, just rotated 180º when is assembled a complete Z Power beyond both valves.
control valve.
C Closed center both valves.
NOTE 2:
K Closed center-Open canter.
406 and 1406 control valves; inlet, outlet and mid-outlet sections are the same
11
 Type
Coding system
412
PORT A PORT B

OPERATING SECTIONS 412 A 2 Z2 D 12 SA 12 T 0 CODE

Code

Microswitch
(page: 29)

Control valve type Auxiliary valve pressure range (pressure set al 22l/min.)

412 Port A - B 3/8” G. Adjustment Pressure Pressure

1412 Port A - B 1/2” G. Adjustable Tamper-proof range bar range psi
422 Pilot operated check valve A - B 3/8” G. 11 41 5-80 (80) 70-1100 (1100)
12 42 85-175 (160) 1200-2500 (2200)
13 43 180-250 (200) 2600-3600 (2900)
14 44 255-350 (315) 3700-5000 (4600)
0 Without valve.
Main relief valve position

Auxiliary valves

A C VA Port relief and anticavitation valve.

SA Port relief valve.
A Anticavitation.
T Plug.
Standard
0 Section without cavity for valves.

D.C. VOLTAGE (Only for spool position kits 83, 84)

Spool position kits 12 12 V

24 24 V
02 Three positions with detent. 00 When spool position kit is different to 83 or 84.

07 Two positions with detent, third position return by spring.

Spool types
09 Two ends positions with detent.
D 3 position, 4-way, double acting, A and B ports blocked in 0 position.
11 Three positions return to neutral by spring.
3 position, 4-way, double acting, A and B ports open to tank
Two positions, neutral and end position by detent, I in 0 position.
14
action pushing spool. 3 position, 4 -way, double acting, A and B ports restricted to
U
Four positions three return by spring the fourth detented, tank in 0 position.
20
pulling spool. 3 position, 3 -way, single acting, A port blocked in position 0,
S B port plugged.
22 Three positions pneumatic pilot (see more inf. page 25).
3 position, 3 -way, single acting, B port blocked in position 0,
V A port plugged.
Two positions, neutral and end position by detent,
24 4 position, 4-way, double acting, A and B port blocked in
action pulling spool. L position 0, 4th position float.
Three positions. Central by spring and two end positions
29
with detent.
Three positions. Rotative device with detent in neutral Operators
35
position.
X Mechanical joystick or special options.
One end position and neutral position with detents,
Y Hydraulic pilot (see more inf. page 24).
36 action pushing spool; and other end position by spring,
action pulling spool. P2 Lever box with lever and rubber boot.
D2 Lever box with rubber boot, inverted 180º.
71 Three positions hydraulic piloted (see more inf. page 24).
Z2 Lever box with rubber boot and without lever.
One end position with detent, action pulling spool; Neutral PI Extension lever box with rubber boot inverted 180º.
74 and other end position by spring, action pushing spool. T Spool end cap.
One end position with detent, action pushing spool; Neutral S Open spool end (no lever box).
75
and other end position by spring, action pulling spool. I Cable control.
Direct solenoid operated, three positions spring centered Electrical control with DEUTSCH connector without diode,
83 E only for 83, 84 spool position kit.
(see more inf. page 21, 22).
Emergency operator with DEUTSCH connector without
Direct solenoid operated, two positions (center + one end). ME diode, only for 83, 84 spool position kit.
84
Solenoid side port A. (see more inf. page 21, 22). R Rotative operator.

12
 Type
Inlet section details
412

Main relief valve and unloading valve

9803003

Hydraulic unloading
valve kit

* **
97180 3/ - 8411273 224901
* 224904
*
Electric unloading Main relief Main relief valve with
valve kit valve kit Tamper proof kit

Main relief valve (pressure set at 22l/min)

Pressure range Adjustable Tamper-proof Tamper-proof P.N. Hat P.N. Spring P.N.

5-80 (80) bar 70-1100 (1100) psi 11 41 714/8/1

85-175 (160) bar 1200-2500 (2200) psi 12 42 Estándar 1671/23

6420/28
180-250 (200) bar 2600-3600 (2900) psi 13 43 Estándar
255-350 (315) bar 3700-5000 (4600) psi 14 44 2249/29 1670/234

13
 Type
Inlet section details
412

Unloading valve

ELECTRIC Part number

97180 3/
T
Power (W)
Connector type
P 30 30 W
** VDC ** W
100% ED
0 HIRSCHMANN
Voltage (DC)
2 DEUTSCH
D12 12 V
D24 24 V

Technical data

Opening pressure 4-5 bar / 58-72 psi

Unloading electric valve Nominal flow 50 L./mín. / 13 (US GPM)
10 (145) Max. work pressure 350 bar / 5075 psi
9 (130)
8 (115)
7 (100) Max. return pressure 80 bar / 1160 psi
6 (85)
p=bar
(psi)

5 (70) Min. pressure form P to T 6 bar / 87 psi

4 (60)
3 (45) Viscosity range ISO 3448 cat. VG22-VG68
2 (30)
1 (15) Hydraulic fluid temperature range -20ºC a +80ºC / -4ºF a +176ºF)
10 20 30 40 50 60 Control voltage DC 12V - 24V
(2.6) (5.3) (7.9) (10) (13) (16)

Q=L/min. Duty cicle 100%

(US GPM)
Protection DIN 40050 DEUTSCH IP-67
HIRSCHMANN IP-65

HYDRAULIC Part number 9803003

1/8” G

Technical data

Opening pressure 4-5 bar / 58-72 psi

Nominal flow 50 L./min. / 13 (US GPM)

Max. work pressure 350 bar / 5075 psi
Max. return pressure 80 bar / 1160 psi
Min. pressure form P to T 6 bar / 87 psi
Viscosity range ISO 3448 cat. VG22-VG68
Hydraulic fluid temperature range -20ºC...+80ºC / -4ºF...+176ºF)

14
 Type
Operating section details
412

Spool types

D I U
3 position, 4-way, double acting, A and B ports 3 position, 4-way, double acting, A and B ports 3 position, 4 -way, double acting, A and B
blocked in 0 position. open to tank in 0 position. ports restricted to tank in 0 position.
T T T
A B A B A B

PP P T1, T2 PP P T1, T2 PP P T1, T2

S V L
3 position, 3 -way, single acting, A port 3 position, 3-way, single acting, B port blocked 4 position, 4-way, double acting, A and B port
blocked in position 0, B port plugged. in position 0, A port plugged. blocked in position 0, 4th position float.
T T T
A B A B A B

PP P T1, T2 PP P T1, T2 PP P T1, T2

15
 Type
Operating section details
412

Spool position kits

2 P.N. M7799/5/2 7 P.N. M7799/5/7

Three positions with detent. Two positions with detent, third position return by spring.

2 0 1 2 0 1

51
51

9 P.N. M7799/5/9 11 M7799/5/11

Two ends positions with detent. Three positons return to neutral by spring.

2 1
2 0 1

51 51

14 P.N. M8412/221 20 P.N. M8412/176

Two positions, neutral and end position by detent, Four positions three return by spring the fourth detented pulling spool.
action pushing spool.

2 1

51
81

24 P.N. M7799/183 29 P.N. M7799/5/29

Two positions, neutral and end position by detent, action pulling spool. Three positions. Central by spring and two end positions with detent.

2 1

51 81

16
 Type
Operating section details
412

Spool position kits

36 P.N. M7799/5/36 74 P.N. M8412/226

One end position and neutral position with detents, action pushing One end position with detent, action pulling spool; Neutral and other
spool; and other end position by spring, end position by spring, action pushing spool.
action pulling spool.

2 0 1 2 0 1

51
81

75 P.N. M8412/227

One end position with detent, action pushing spool; Neutral and other
end position by spring, action pulling spool.

2 0 1

81

Operators

Lever box without lever

Lever box with lever P.N. 8412267 P2 Z2
(Standard)

D2 Is the same operator rotated 180º but de not allow port vales options

M.8x14
14º

M.8
14º

NOTE: Only includes knob + lever + nut. 49 49

17
 Type
Operating section details
412

Operators

Extension lever box with rubber P.N. 7799/166 PI P.N. M7799/6/4 S

Open spool end (no lever box)
boot rotated 180º

114
90
25

Ø 15

7
9
25 (neutral position)

Spool end cap P.N. M7799/6/5 T

51

NOTE:
Only includes pieces with mark

Mechanical joystick P.N. M7799/123 X

14º
14º

65
NOTE:
14º degree at all directions. 270

Cable control P.N. M7799/6/1 I

M.16x1.5
Ø 23.5

M.6

85

18
 Type
Operating section details
412

Auxiliary valves

Auxilary
Plug
relief valve

M6412/113/1
*
2VSD /SA

Auxilary
Anticavitation valve
relief valve
VA 2VSD /SA

Auxiliary relief with Auxiliary relief with

anticavitation valve anticavitation valve

*
2VSD /VA 2VSD /VA

Port relief pressure setting (pressure set at 12l. min)

Adjustable
* Tamper-proof Pressure ranges
11 41 5-80 (80) bar 70-1100 (1100) psi

12 42 85-175 (160) bar 1200-2500 (2200) psi

13 43 190-250 (200) bar 2600-3600 (2900) psi

14 44 255-350 (315) bar 3700-5000 (4600) psi

Replaced and for the setting pressure (see table).

19
 Type
Operating section details
412

Auxiliary valves

Port relief and anticavitation valve

Adjustable P.N. 2VSD /VA
Tamper-proof P.N. 2VSD /VA
*
A-B

T A-B T

300 (4350) 32 (465)

30 (435)
28 (405)
250 (3625) 26 (380)
24 (350)
200 (2900) 22 (320)
20 (290)

p=bar
p=bar

(psi)
18 (260)
(psi)

150 (2175) 16 (230)

14 (200)
100 (1450) 12 (175)
10 (145)
8 (115)
50 (725) 6 (90)
4 (60)
0 2 (30)
0 10 20 30 40 50 60 70 80 90 100
10 20 30 40 50 60 70 80 90 100
(2.6) (5.3) (7.9) (10) (13) (16) (19) (21) (24) (26)
(2.6) (5.3) (7.9) (10) (13) (16) (19) (21) (24) (26)
Q=L/min Q=L/min
(US GPM) (US GPM)

Port relief valve

Adjustable P.N. 2VSD /SA
Tamper-proof P.N. 2VSD /SA
*
300 (4350)

250 (3625)

200 (2900)
p=bar

A-B
(psi)

150 (2175)

T A-B 100 (1450)

50 (725)

0
T
0 10 20 30 40 50 60 70 80 90 100
(2.6) (5.3) (7.9) (10) (13) (16) (19) (21) (24) (26)
Q=L/min
(US GPM)

Anticavitation P.N. VA

32 (465)
30 (435)
28 (405)
26 (380)
24 (350)
22 (320)
20 (290)
p=bar
(psi)

18 (260)
16 (230)
14 (205)
12 (175)
T A-B 10 (145)
T A-B 8 (115)
6 (90)
4 (60)
2 (30)

10 20 30 40 50 60 70 80 90 100
(2.6) (5.3) (7.9) (10) (13) (16) (19) (21) (24) (26)
Q=L/min
(US GPM)

20
 Type
Operating section details
412

Rotative operator

Spool position
Operator (R) kit (35)

Neutral position (0)

º
90

90
º
131

51,8
48

Turn left Turn right

position (1) position (2)
54

5,5
48
5,5

T T1
37

P T2

NOTE: Rotative pilot normally use a stainless steel spool. Spool position type 35 and operator type R standard P.N. 8412283001

Operator Spool position Kit Function Description

R 35 2 0 1 Rotary device with detent in neutral position.

21
 Type
Operating section details
412

Multiple rotative operator

65 48 Spool position
Operator (R)
kit (35)

48

T T1

37
P T2

65 48

5,5 5,5

Turn right Turn right

position (2) position (1)
º

90
90

Neutral Neutral
position (0) position (0)
90

º
90
º

Turn left Turn left

position (1) position (2)
5,5 5,5

Spool position type 35 and operator type R standard P.N. 8412283001

Spool position type 35 and operator type R extended P.N. 8412283002

NOTE: Rotative pilot normally use a stainless steel spool.

Operator Spool position Kit Function Description

R 35 2 0 1 Rotary device with detent in neutral position.

22
 Type
Operating section details
412

Direct solenoid operated section

Spool position kit 83

88
6
Plug AUXILIARY Plug
VALVES

127
314
NOTE:
When ordering spool position kit 83 “A” main relief valve postion must be used.

Spool position kit 84, according main relief valve in A (Standard) position Kit converter to spool kit type 84.
P.N.: M7799/5/84/85

Connection

236
280
NOTE:
In spool position kit 84, solenoid side is considered operator side.

280 (4060)

240 (3480)
200 (2900)
Coil connector Required connector
Operator Hand lever IP-Protector 200 (2320)
(Female) (Male)
p=bar
(psi)

160 (2320)
E without DEUTSCH DT04-2P DEUTSCH DT06-2S 67
120 (1740)

80 (1160)
Spool
Main relief 40 (580)
position Function Description
Valve position 0
Kit
10 20 30 40 50
(2.6) (5.3) (7.9) (10) (13)
A 83 Three positions; end positions by direct sole-
2 0 1 Q=L/min
noid, neutral position by spring.
(US GPM)
Two positions; neutral position and end po-
A-C 84 sition. Position 0 by spring and end position
by solenoid in side A port.

Ambient operating
Coil voltage Coil wattage Coil resistance Duty Coil insulation
Temperature (Coil)
12 V DC 42 W 3,25 Ohm continuous (100%) -54ºC (-65ºF) / +60ºC (+140ºF) CLASS H

24 V DC 42 W 13,7 Ohm continuous (100%) -54ºC (-65ºF) / +60ºC (+140ºF) CLASS H

23
 Type
Operating section details
412

Direct solenoid operated section with emergency operator

17º
Spool position kit 83 17
º

193
86

86
NOTE:
When ordering spool position kit 83
with emergency operator “A” main
6

127 42
relief position valve must be used. 345

Spool position kit 84, according main relief valve in C position

Connection

NOTE:
In spool position kit 84,
with emergency operator,
solenoid side is considered 268
operator side. 311

280 (4060)

240 (3480)
200 (2900)
Coil connector Required connector 200 (2320)
Operator Hand lever IP-Protector
p=bar

(Female) (Male)
(psi)

160 (2320)

ME with DEUTSCH DT04-2P DEUTSCH DT06-2S 67 120 (1740)

80 (1160)
Spool 40 (580)
Main relief
position Function Description 0
Valve position
Kit 10 20 30 40 50
(2.6) (5.3) (7.9) (10) (13)

A 83 Three positions; end positions by direct sole- Q=L/min

2 0 1
noid, neutral position by spring. (US GPM)

Two positions; neutral position and end po-

A-C 84 sition. Position 0 by spring and end position
by solenoid in side A port.

Ambient operating
Coil voltage Coil wattage Coil resistance Duty Coil insulation
Temperature (Coil)
12 V DC 42 W 3,25 Ohm continuous (100%) -54ºC (-65ºF) / +60ºC (+140ºF) CLASS H

24 V DC 42 W 13,7 Ohm continuous (100%) -54ºC (-65ºF) / +60ºC (+140ºF) CLASS H

24
 Type
Operating section details
412

Pneumatic pilot

NOTE:
Pneumatic pilot normally use an operator type Z2 (standard), S or T. If you want use another type of operator for this pneumatic pilot, please contact.

Operator side (Z2) Spool position

kit (22)

1/8” NPT
1/8” NPT
120

80
6
Plug AUXILIARY VALVES Plug

49 127 99

Operator side (S) Pneumatic Pilot

Entry by SMALL Chamber

100
90
Ø15

80
% Full Flow
7

70
60
50
40
9 30
20
25 (neutral position) 10
0
0 0,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10
Pressure in Pilot Line (bar) Hysteresis Cycle

Operator side (T)

Pneumatic Pilot
Entry by LARGE Chamber

51 100
90
80
% Full Flow

70
60
50
40
30
20
10
0
0 0,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10
Pressure in Pilot Line (bar) Hysteresis Cycle

Operator Spool position Kit Function Description

S
Z2 22 Three positions pneumatic piloted.
T

25
 Type
Operating section details
412

Hydraulic pilot

NOTE:
Hydraulic pilot only use spool position kit 71 and operator Y.

Note: No seal required

Operator side (Y) Spool position

kit (71)

1/8” G 1/8” G

86
6
Plug AUXILIARY VALVES Plug

127

235

Hydraulic Pilot
100

90

80

70
% Full Flow

60

50

40

30

20

10

0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Pressure in Pilot Line (bar) Hysteresis Cycle

Operator Spool position Kit Function Description

Y 71 Three positions pneumatic piloted.

26
 Type
Operating section details
412

Pilot operated check valve

Spool position
Operator side (E)
kit (83)

126
315

CODING SYSTEM EXAMPLE: 422/A83E-I24/0-0/0-0

Spool position
Operator side (Z2)
kit (11)
126

227

246

CODING SYSTEM EXAMPLE: 422/A11Z2-I00/VA-13/VA-13

27
 Type
Additional sections
412

3 way flow control for directional control valves

This flow control section can be fitted at any position in valve assembly except final section, according to which sections are required with a
reduced flow rate.
All sections downstream of this valve can only operated at this reduced flow rate.

T T
P
82

PP1

6 137 max 23

166

NOTE:
Not possible reduce flow on final section.

3 way flow control ajustable P.N. M7792002 3 way flow control with knob P.N. M7792003

36
38

74,5
PP PP

PP1 PP1

T PP P T

T1 PP1 P1 T1

Technical data

Nominal flow rate 50 l/min / 13 (US GPM)

Min. flow rate 5 l/min / 1 (US GPM)

Max. work pressure 350 bar / 5075 psi

28
 Type
Mid-outlet details
412

Mid-outlet scheme

Closed center (return C)

P1 P T2

A1

B1

A2
1/8”G. B2
1/2”G.
1/4”G. 1/4”G.
A3
T B3

T1

B3

A3

T1
1/2”G.

B2
82

A2
1/4”G.

B1
A1

P1 P T2
4 137 38

Free flow (return N)

Operative tank port-plugs

Side port Plug in port T P1 P
T2

Top port Plug in port T1

Turn around port Plug in ports T and T1

A1
B1

1/8”G.
1/2”G. A2
1/4”G. 1/4”G. B2

A3
B3

T T

T1

B3
T1
1/2”G.

A3
82

B2
1/4”G.

A2

B1
A1

4 137 38
P1 P T2

29
 Type
Mid-outlet details
412

Power beyond (return Z)

P1 P T2

200 bar

A1
B1

1/8”G.
1/2”G. A2
1/4”G. 1/4”G. B2

A3
B3

Tp Tp

T1

B3

T1
1/2”G.
A3

82
B2
1/4”G.

A2

B1
A1

200 bar

4 137 38
P1 P T2

Return configuration

Z
C

Ports
Return type Part number
T

N Open center 1/2” G. Standard

Z Power beyond 1/2” G. N8412/177

C Closed center Plug N8412/178

30
 Type
Operating section details
412

Position microswitch *

PRECISION BALL SWITCHES

TECHNICAL DATA

Current Voltage Temperature

Connector Type
range range range

Packard Normally open

0,01-5,0 Amp 5-24 V -40 ºC to 120 ºC
weather pack
Normally close

PACKARD WEATHER PACK

Female connector with male end.

NOTE:
Seal is required

181
114

86
6

127 39

266

* Subject to minimum order quantities

POSITION MICROSWITCH NORMALLY OPEN POSITION MICROSWITCH NORMALLY CLOSE

CODE FOR CONTROL CODE FOR CONTROL

PART NUMBER PART NUMBER
VALVE SECTIONS PART FUNCTION VALVE SECTIONS PART FUNCTION
KIT KIT
NUMBER NUMBER

NO1 M8412/217/1 NC1 M8412/218/1

NO3 M8412/217/3 NC3 M8412/218/3

NO2 M8412/217/2 NC2 M8412/218/2

CODING SYSTEM EXAMPLE: 412/A11Z2-D00/VA-13/T-0-NO3 CODING SYSTEM EXAMPLE: 412/A11Z2-D00/VA-13/T-0-NC3

31
 Type
Request a ROQUET control valve
412

Specification sheet for special control valve with code

Return type End cover Code (additional data, paint, etc.):

Closed center Operativa port:

Top port
Free flow
Front port
H.P.C.O.

Spool position: Auxiliary valve: Section: Without valve Auxiliary valve: Hand lever:
Section: With valve
9
Corredera:

Spool position: Auxiliary valve: Section: Without valve Auxiliary valve: Hand lever:
Section: With valve
8
Corredera:

Spool position: Auxiliary valve: Section: Without valve Auxiliary valve: Hand lever:
Section: With valve
7
Corredera:

Spool position: Auxiliary valve: Section: Without valve Auxiliary valve: Hand lever:
Section: With valve
6
Corredera:

Section: Without valve

Elements

Spool position: Auxiliary valve: Auxiliary valve: Hand lever:

Section: With valve
5
Corredera:

Spool position: Auxiliary valve: Section: Without valve Auxiliary valve: Hand lever:
Section: With valve
4

Corredera:

Spool position: Auxiliary valve: Section: Without valve Auxiliary valve: Hand lever:
Section: With valve
3

Corredera:

Spool position: Auxiliary valve: Section: Without valve Auxiliary valve: Hand lever:
Section: With valve
2

Corredera:

Spool position: Auxiliary valve: Section: Without valve Auxiliary valve: Hand lever:
Section: With valve
1

Corredera:

Type: 406 Unloading valve: Inlet cover: Main relief valve:

1406

Operative port:
Top port
Front port

ROQUET part number

Main relief valve

Type Return S. p. device Hand lever Position Setting Spools Voltage Unloading valve Code

Maximum number of characters as 25 by part number.

Note: Part number must be checked by PEDRO ROQUET S.A., It is reserved the right to change it. The code is provided only by PEDRO ROQUET S.A.

32
 Type
Notes
412

33
 www.pedro-roquet.com

www.ciandisseny.com

EN.08.02.01/05.18