Scribd
Upload
271 views3 pages

Design Report Shear Connection PDF

This document provides the results of a steel connection design check. It analyzes a single plate beam-column flange connection with an ID of 6. Various load cases are considered with demands on the beam and column listed. Geometric details of the connection are provided such as plate dimensions and bolt spacing. A design check is performed for limit states including bolt shear, bolt bearing, plate shear yielding, shear rupture, and weld capacity. The connection is found to meet all limit state ratios considered under the critical load case of D2.

Uploaded by

Darshan Panchal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
271 views3 pages

Design Report Shear Connection PDF

This document provides the results of a steel connection design check. It analyzes a single plate beam-column flange connection with an ID of 6. Various load cases are considered with demands on the beam and column listed. Geometric details of the connection are provided such as plate dimensions and bolt spacing. A design check is performed for limit states including bolt shear, bolt bearing, plate shear yielding, shear rupture, and weld capacity. The connection is found to meet all limit state ratios considered under the critical load case of D2.

Uploaded by

Darshan Panchal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Current Date: 21-Apr-14 17:03

Units system: SI

Steel connections
Results
________________________________________________________________
________________________________________________________________
________________________________________________________

________________________________________________________________
________________________________________________

Connection name : SP BCF


Connection ID : 6
________________________________________________________________
________________________________________________

Family: Beam - Column flange (BCF)


Type: Single plate
Design code: AISC 360-10 ASD

DEMANDS
Beam Column
Description Ru Pu Pu Mu22 Mu33 Load type
[KN] [KN] [KN] [KN*m] [KN*m]
----------------------------------------------------------------
-----------------------------------------------------------------
DL 45.00 0.00 0.00 0.00 0.00 Design
LL 150.00 0.00 0.00 0.00 0.00 Design
Wx 45.00 0.00 0.00 0.00 0.00 Design
D1 45.00 0.00 0.00 0.00 0.00 Design
D2 195.00 0.00 0.00 0.00 0.00 Design
D3 157.50 0.00 0.00 0.00 0.00 Design
D4 90.00 0.00 0.00 0.00 0.00 Design
D5 191.25 0.00 0.00 0.00 0.00 Design
D6 72.00 0.00 0.00 0.00 0.00 Design
----------------------------------------------------------------
-----------------------------------------------------------------

GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------
Shear plate

Length [mm] 304.80 170.00 340.00 p. 10-104

Thickness [mm] 10.00 -- 11.11 p. 10-102

Number of bolts 4 2 12 p 10-102

Distance from the bolt line to the weld line [mm] 55.00 -- 88.90 p 10-102

Plate or beam web thickness [mm] 10.00 -- 11.11 Table 10-9

Vertical edge distance [mm] 38.10 25.40 -- Tables J3.4,


J3.5

Horizontal edge distance [mm] 38.10 38.10 -- p. 10-103

Vertical center-to-center spacing (pitch) [mm] 76.20 50.80 213.60 Sec. J3.3,
Sec. J3.5
Beam

Vertical edge distance [mm] 85.70 25.40 -- Tables J3.4,


J3.5

Horizontal edge distance [mm] 42.30 38.10 -- p. 10-103


Support

Weld size [1/16in] 6 4 -- p. 10-101

Weld length [mm] 304.80 38.10 -- Sec. J2.2b


------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------

DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------
Shear plate
Bolts shear [KN] 197.65 195.00 D2 0.99 Tables (7-1..14)
Bolt bearing under shear load [KN] 340.90 195.00 D2 0.57 Eq. J3-6
Shear yielding [KN] 302.62 195.00 D2 0.64 Eq. J4-3
Shear rupture [KN] 259.01 195.00 D2 0.75 Eq. J4-4
Block shear [KN] 252.55 195.00 D2 0.77 Eq. J4-5
Plate (support side)
Weld capacity [KN] 594.47 195.00 D2 0.33 Tables 8-4 .. 8-11
Beam
Bolt bearing under shear load [KN] 364.72 195.00 D2 0.53 Eq. J3-6
Shear yielding [KN] 490.90 195.00 D2 0.40 Eq. J4-3
Shear rupture [KN] 372.26 195.00 D2 0.52 Eq. J4-4
Support
Welds rupture [KN/m] 4624.98 639.76 D2 0.14 p. 9-5
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------
Global critical strength ratio 0.99
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------

You might also like