Technical Data Sheet
Previous Names: Shell Albida Grease EP 2, Shell Retinax LX 2, Darina XL EP 2, Rotella HD
• Extra Protection
Shell Gadus S3 V220C 2 • High Temperature
• Red Lithium Complex
Premium multi-purpose extreme-pressure grease
Shell Gadus S3 V220C greases are premium multi-purpose greases based on high viscosity index mineral oil and a
Lithium Complex soap thickener. They contain the latest additives to offer excellent High Temperature oxidation
performance and other additives to enhance its anti-oxidation, anti-wear and anti-corrosion properties. Shell Gadus S3
V220C greases are especially suitable for bearings operating at High Temperature and under load.
Performance, Features & Benefits · Shell Gadus S3 V220C greases are used for the grease
· Excellent mechanical stability even under vibrating conditions. lubrication of heavy-duty bearings used in machinery found in
the following applications:
Consistency retained over long periods, even in conditions of
severe vibration. · Continuous casting
· Enhanced extreme-pressure properties. · Vibrating sieves
Excellent load-carrying performance. · Quarries
· Good water resistance. · breakers
Ensures lasting protection even in the presence of large
· Roller conveyors
amounts of water.
· Automotive Wheel bearings
Specifications, Approvals & Recommendations
· High dropping point.
· Long operational life at high temperatures. · ASTM D4950-07 GC-LB
· Effective corrosion protection. · For additional questions and listing of equipment approvals and
Ensures components/bearings do not fail due to corrosion. recommendations, contact your local Shell Technical Helpdesk
or the OEM Approvals website.
Main Applications
Typical physical characteristics
Properties Method Shell Gadus S3 V220C 2
NLGI Consistency 2
color Red
Soap Type Lithium complex
Base Oil Type Mineral
Base Oil Viscosity 0
@40 C cSt IP 71 / ASTM D445 220
Base Oil Viscosity @100 C 0
cSt IP 71 / ASTM D445 19
Cone Penetration, Worked 0
@25 C 0.1mm IP 50 / ASTM D217 265-295
Dropping Point 0
C IP 396 240
Pumpability Long Distance Fair
These Characteristics are typical of current production. While future production will conform to Shell's specification, variations in
These Characteristics may occur.
Page 1 of 2 Shell Gadus S3 V220C 2, v 2.1 06.12.2013.17.52
Heath, Safety & Environment
· Health and Safety
Shell Gadus S3 V220C Grease is unlikely to present any significant health or safety hazard when properly used in the
recommended Application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorized collection point. Do not discharge into drains, soil or water.
Additional Information
· Operating Temperature
0 0
Operating temperature range -20 C to 140 C (peak 150 C) 0
· Re-greasing Intervals
For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed
· Advice
Product recommendations on applications not listed here may be obtained from your Shell representative.
Page 2 of 2 Shell Gadus S3 V220C 2, v 2.1 06.12.2013.17.52
