Scribd
Upload
137 views4 pages

Aqua Flame Brochure PDF

Aqua Flame WB is a white, water-based intumescent coating that provides up to 2 hours of fire rating when applied to electrical cables and cable trays. It produces a char layer when burned to insulate the core and prevent further flame spread. Aqua Flame WB has been tested under international standards IEC 60332-3-22 and IEC 60331-1 to resist mechanical shocks during fire and maintain circuit integrity up to 120 minutes. It is a dual purpose coating that acts as both a flame retardant and provides fire resistance.

Uploaded by

Heramb Trifaley
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
137 views4 pages

Aqua Flame Brochure PDF

Aqua Flame WB is a white, water-based intumescent coating that provides up to 2 hours of fire rating when applied to electrical cables and cable trays. It produces a char layer when burned to insulate the core and prevent further flame spread. Aqua Flame WB has been tested under international standards IEC 60332-3-22 and IEC 60331-1 to resist mechanical shocks during fire and maintain circuit integrity up to 120 minutes. It is a dual purpose coating that acts as both a flame retardant and provides fire resistance.

Uploaded by

Heramb Trifaley
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Aqua

Flame
WB
IEC 60331
IEC 60332 www.agep-international.com
Aqua Aq
Fla
Flame
qua
A
Aqu
qua Flame WB is a white, synthetic resin based intumescent coating that is
applied on electrical cables and/or cable trays to achieve up to 2 hours re

Flam
rating. Aqua Flame WB is water-based coating hence it is completely safe for
the insulation.

ame
Aqua Flame WB is a dual purpose coating that produces char upon burning
and hence does not allow the core temperature to reach tripping point. At the

Aqu
same time, Aqua Flame WB acts as a ame retardant coating that does not
allow further ame spread.

Aqua Flame WB is suitable for application on

HV Cable Coating Fireproofing of Penetration Domestic electrical

ua
switch boxes fireproofing cable fireproofing

Fire rated cable Fireproofing of Substation Bunched cables


coating domestic electrical fireproofing in refineries,
meter rooms petrochemical
Fireproofing of Electrical Cable tray plants, offshore
electrical wall substation fireproofing platforms, rigs etc.
openings fireproofing
Aqua Aq
Fla
Flame
quaAqu
Aqua Flame WB has been tested in accordance with the following
International standards:

IEC 60332 - 3 - 22: 2018


Certied Cat A product, does not allow ame spread more than 1m

Flam
IEC 60331-1: 2018
Resistance to mechanical shocks during re to preserve circuit integrity

ame
IEC 60331-1: 2018

Aqu
Fire rating up to 120 minutes without tripping the circuit
ASTM D 2863
Oxygen index of coating during re. Low smoke during re.

Technical Information

ua
Colour White
Packing 5kg, 20kg,
50kg, 180kg
No. of packs Single pack
Volume Solids 45 +/- 3%
Density 1.37 kg/l
Finish Matt
Theoretical Coverage 3kg per square metre
at 1mm thickness
Application By spray, brush or mitt
Typical Thickness 0.6mm per coat
AGEP India Private Limited
C-002, Grishma, Prakruti Park,
Brahmand, Thane 400607
+917755907001
+91 7620855902
[email protected]

AGEP Limited Partnership


113/2 Moo 5, Pong,

ameFlam
Banglamung, Chonburi 20150
[email protected]

www.agep-international.com

Aqua
qua A
Flame
Fla

You might also like