1

Question Which is chemical Hazard?

Type Multiple Choice

Option Noise Incorrect
Option Explosive Correct
Option Vibration Incorrect
Option Radiation Incorrect
Solution
Marks 1 0

Question Which type of occupational health hazards Involves “Toxic”?

Type Multiple Choice

Option Physical hazard Incorrect
Option Chemical hazard Correct
Option Biological hazard Incorrect
Option Mechanical hazard Incorrect
Solution
Marks 1 0

Question Which is the motive of occupational health and safety?

Type Multiple Choice

Option Decrease employee morale Incorrect
Option Decreasing the quality Incorrect
Option Reducing absentism Correct
Option Minimising productivity Incorrect
Solution
Marks 1 0

1
 2

Question What type of safety covers the wearing of safety shoes in workshop?

Type Multiple Choice

Option General safety Incorrect
Option Personal safety Correct
Option Machine safety Incorrect
Option Occupational safety Incorrect
Solution
Marks 1 0

Question Which is the occupational mechanical

Type Multiple Choice

Option Sickness Incorrect
Option Current leakage Incorrect
Option Unguarded machinery Correct
Option Wrong layout of machinery Incorrect
Solution
Marks 1 0

Question Which is the Biological hazard?

Type Multiple Choice

Option Smoking Incorrect
Option Sickness Incorrect
Option Infection Correct
Option Poor discipline Incorrect
Solution
Marks 1 0

Question Which fire extinguisher used for flammable liquid fires?

2
 3

Type Multiple Choice

Option Halon extinguisher Incorrect
Option Dry powder extinguisher Correct
Option CTC extinguisher Incorrect
Option Water extinguisher Incorrect
Solution
Marks 1 0

Question Which type of personal protection recommended to handle loads with

rough surfaces and pointed projections?
Type Multiple Choice
Option Paper gloves Incorrect
Option Rubber gloves Incorrect
Option Leather gloves Correct
Option Polythene gloves Incorrect
Solution
Marks 1 0

Question Which is toxic in the automobile workshop?

Type Multiple Choice

Option Old bearings Incorrect
Option Paper wrappers Incorrect
Option Used lubricant Correct
Option Old washer, bolts and nuts Incorrect
Solution
Marks 1 0

Question More harmful in place of harmful.

Type Multiple Choice

Option Oxygen Incorrect

3
 4

Option Water vapour Incorrect

Option Carbon dioxide Incorrect
Option Carbon monoxide Correct
Solution
Marks 1 0

Question Which gas is harmful to human health?

Type Multiple Choice

Option Nitrogen Incorrect
Option Water Vapour Incorrect
Option Carbon-di-oxide Incorrect
Option Carbon- monoxide Correct
Solution
Marks 1 0

Question What is the effect of air borne dust in workshop?

Type Multiple Choice

Option Diarrhoea Incorrect
Option Dehydration Incorrect
Option Throat infection Correct
Option Rise in blood pressure Incorrect
Solution
Marks 1 0

Question Which device is used to remove toxic waste?

Type Multiple Choice

Option Water wash Incorrect
Option Incinerators Incorrect
Option Compressed air Incorrect

4
 5

Option Vacuum cleaner Correct

Solution
Marks 1 0

Question What is the name of safety device?

Type Multiple Choice

Option Goggle Correct
Option Hand gloves Incorrect
Option Hand screen Incorrect
Option Helmet screen Incorrect
Solution
Marks 1 0

Question Which distance is known as wheel base of the vehicle?

Type Multiple Choice

Option Centre to centre distance between front wheels Incorrect
Option Centre to centre distance between rear wheels Incorrect
Option Centre to centre distance between front and rear Correct
wheels
Option End to end distance between front and rear wheels Incorrect
Solution
Marks 1 0

Question Which part of body is bleeding profusely is considered serious and need
professional attention?
Type Multiple Choice
Option Leg of the human body Incorrect
Option Knee of the human body Incorrect
Option Wrist of the human body Correct
Option Thigh of the human body Incorrect
Solution

5
 6

Marks 1 0

Question How to treat burns and scalds?

Type Multiple Choice

Option Blow hot air to the burnt hand Incorrect
Option Blow cool air to the burnt hand Incorrect
Option Covering with water Correct
Option Covered hot water to the burnt hand Incorrect
Solution
Marks 1 0

Question What is first aid?

Type Multiple Choice

Option It is the emergency medical treatment Incorrect
Option It is an immediate life saving treatment Correct
Option It is the intensive medical treatment Incorrect
Option It is the rule to assessing the treatment Incorrect
Solution
Marks 1 0

Question What will you do if an electric shock victim unable to release his grip from
the conductor?
Type Multiple Choice
Option Make sure the power is turned off Correct
Option Cover all burns with a dry loose dressing Incorrect
Option Place the victim on one side with head down Incorrect
Option Ask a bystander to help you to move the victim Incorrect
Solution
Marks 1 0

6
 7

Question Which class of fire involves liquefied gases?

Type Multiple Choice

Option Class A Incorrect
Option Class B Incorrect
Option Class C Correct
Option Class D Incorrect
Solution
Marks 1 0

Question Which fire extinguisher suitable for class “C”fire?

Type Multiple Choice

Option Foam filled extinguisher Incorrect
Option Water filled extinguisher Incorrect
Option Dry powder fire extinguisher Correct
Option Carbon-di-oxide fire extinguisher Incorrect
Solution
Marks 1 0

Question Which factor isolate the fire from oxygen by blanketing?

Type Multiple Choice

Option Cooling Incorrect
Option starving Incorrect
Option Misfiring Correct
Option Smothering Incorrect
Solution
Marks 1 0

Question Which class of fire involves wood

Type Multiple Choice

7
 8

Option Class ‘A’ fire Correct

Option Class ‘B’ fire Incorrect
Option Class ‘C fire Incorrect
Option Class ‘D’ fire Incorrect
Solution
Marks 1 0

Question How the waste oil is disposed?

Type Multiple Choice

Option Hand over back to the customer Incorrect
Option Throw the removed oil in the drain Incorrect
Option Keep in small containers in remote corners Incorrect
Option Collect waste oil container and dispose to register Correct
vendors
Solution
Marks 1 0

8
 9

Question Which type of energy to minimize the waste without affecting

production?|
Type Multiple Choice
Option Utilization of energy Incorrect
Option Modification of energy Incorrect
Option Conservation of energy Correct
Option Manipulation of energy Incorrect
Solution
Marks 1 0

Question What type of energy reduces consumption by replacing old bulb with new
LED?
Type Multiple Choice
Option Utilization of energy Incorrect
Option Modification of energy Incorrect
Option Manipulation of energy Incorrect
Option Conservation of energy Correct
Solution
Marks 1 0

Question Which are the major energy conservation opportunities?

Type Multiple Choice

Option Stopping of leakage Incorrect
Option Replacement machineries Correct
Option Replacement of house hold appliance Incorrect
Option Laps in house keeping Incorrect
Solution
Marks 1 0

Question Which type of energy conservation comes under the replacement of old

9
 10

machineries?
Type Multiple Choice
Option Minor energy conservation opportunities Incorrect
Option Major energy conservation opportunities Correct
Option Medium energy conservation opportunities Incorrect
Option Very minor energy conservation opportunities Incorrect
Solution
Marks 1 0

Question Which type of energy conservation opportunity involves stopping of water

leakage points?
Type Multiple Choice
Option Minor energy conservation opportunities Correct
Option Major energy conservation opportunities Incorrect
Option Medium energy conservation opportunities Incorrect
Option Extra major energy conservation Incorrect
Solution
Marks 1 0

Question Which are medium energy conservation opportunities?

Type Multiple Choice

Option Housekeeping Incorrect
Option Stopping of water leakage Incorrect
Option Renovation of the old building Incorrect
Option Replacement of existing house hold appliances Correct
Solution
Marks 1 0

Question What is the name of part marked as X?

Type Multiple Choice

10
 11

Option Beam Incorrect

Option Fixed jaw Incorrect
Option Vernier scale Incorrect
Option Depth measuring blade Correct
Solution
Marks 1 0

Question What is the name of the part marked as X?

Type Multiple Choice

Option Cap Incorrect
Option Lock Correct
Option Stock Incorrect
Option Graduated sleeve Incorrect
Solution
Marks 1 0

Question What is the least count of the metric outside micrometer?|

Type Multiple Choice

Option 0.01mm Correct
Option 0.10mm Incorrect
Option 0.0001mm Incorrect
Option 0.00001mm Incorrect
Solution
Marks 1 0

Question Which part ensures uniform pressure on the measuring faces in the
outside micrometer?
Type Multiple Choice
Option Barrel Incorrect
Option Spindle Incorrect

11
 12

Option Thimble Incorrect

Option Ratchet stop Correct
Solution
Marks 1 0

Question Which is the fixed measuring face of micrometer?

Type Multiple Choice

Option Anvil Correct
Option Barrel Incorrect
Option Spindle Incorrect
Option Thimble Incorrect
Solution
Marks 1 0

Question Which instrument is used to measure the diameter of cam shaft journals?

Type Multiple Choice

Option Depth micrometer Incorrect
Option Three-point internal micrometer Incorrect
Option Inside micrometer Incorrect
Option Outside micrometer Correct
Solution
Marks 1 0

Question Which material used in the outside micrometer anvil?

Type Multiple Choice

Option Brass Incorrect
Option Bronze Incorrect
Option Carbon Incorrect
Option Carbide Correct

12
 13

Solution
Marks 1 0

Question What is the name of the part marked as X?

Type Multiple Choice

Option Anvil Incorrect
Option Frame Correct
Option Spindle Incorrect
Option Thimble Incorrect
Solution
Marks 1 0

Question What is the name of the part marked as X?

Type Multiple Choice

Option Anvil Correct
Option Frame Incorrect
Option Spindle Incorrect
Option Thimble Incorrect
Solution
Marks 1 0

Question How many equal thimble divisions are made in outside micrometer?

Type Multiple Choice

Option 30 Divisions Incorrect
Option 40 Divisions Incorrect
Option 50 Divisions Correct
Option 60 Divisions Incorrect
Solution
Marks 1 0

13
 14

Question What is the value of one thimble division reading in outside micrometer?

Type Multiple Choice

Option 0.05 mm Incorrect
Option 0.01 mm Correct
Option 0.02 mm Incorrect
Option 0.03 mm Incorrect
Solution
Marks 1 0

Question What is the name of the measuring instrument?

Type Multiple Choice

Option Depth gauge Incorrect
Option Bore dial gauge Correct
Option Telescopic gauge Incorrect
Option Vernier gauge Incorrect
Solution
Marks 1 0

Question What is the name of the part marked as X?

Type Multiple Choice

Option Spindle Incorrect
Option Plunger Incorrect
Option Centring shoes Correct
Option Fixed anvil insert Incorrect
Solution
Marks 1 0

Question What is the name of the part marked as X?

14
 15

Type Multiple Choice

Option Spindle Incorrect
Option Plunger Correct
Option Fixed Anvil Insert Incorrect
Option Centring shoes Incorrect
Solution
Marks 1 0

Question What is the name of the part marked as X?

Type Multiple Choice

Option Stem Correct
Option Plunger Incorrect
Option Fixed Anvil Insert Incorrect
Option Centring shoes Incorrect
Solution
Marks 1 0

Question Which part actuates the movement of the dial for reading measurement
of dial bore gauge?
Type Multiple Choice
Option Stem Incorrect
Option Plunger Correct
Option Fixed anvil Incorrect
Option Centring shoe Incorrect
Solution
Marks 1 0

Question Which instrument used to read the telescopic gauge measurement?

Type Multiple Choice

15
 16

Option Depth micrometer Incorrect

Option Inside micrometer Incorrect
Option Outside micrometer Correct
Option Three point internal micrometer Incorrect
Solution
Marks 1 0

Question What is the name of the part marked as X?

Type Multiple Choice

Option Anvil Incorrect
Option Stem Incorrect
Option Plunger Correct
Option Pointer Incorrect
Solution
Marks 1 0

Question Name the part marked as X

Type Multiple Choice

Option Anvil Incorrect
Option Clamp Correct
Option Plunger Incorrect
Option Stem Incorrect
Solution
Marks 1 0

Question Which instrument is used to check the end- play of crank shaft?

Type Multiple Choice

Option Dial test indicator Correct
Option Telescopic gauge Incorrect

16
 17

Option Bore dial gauge Incorrect

Option Slip gauge Incorrect
Solution
Marks 1 0

Question What is the name of the gauge?

Type Multiple Choice

Option Feeler gauge Correct
Option Snap gauge Incorrect
Option Telescopic gauge Incorrect
Option Plug gauge Incorrect
Solution
Marks 1 0

Question Which can be measured by feeler gauge?

Type Multiple Choice

Option Radius Incorrect
Option Screw pitch Incorrect
Option Surface roughness Incorrect
Option Gap between mating parts Correct
Solution
Marks 1 0

Question Which marking media is used on the rough surfaces?

Type Multiple Choice

Option Whitewash Correct
Option Prussian blue Incorrect
Option Copper Sulphate Incorrect
Option Cellulose lacquer Incorrect

17
 18

Solution
Marks 1 0

Question Which marking media used to mark in the finished surfaces?

Type Multiple Choice

Option Whitewash Incorrect
Option Prussian blue Correct
Option Copper Sulphate Incorrect
Option Cellulose lacquer Incorrect
Solution
Marks 1 0

Question Which marking media is poisonous?

Type Multiple Choice

Option Whitewash Incorrect
Option Prussian blue Incorrect
Option Copper sulphate Correct
Option Cellulose lacquer Incorrect
Solution
Marks 1 0

Question What is the name of equipment?

Type Multiple Choice

Option Surface plate Correct
Option Angle plate Incorrect
Option ‘V’ Block Incorrect
Option Parallel Block Incorrect
Solution
Marks 1 0

18
 19

Question What is the basic unit of length as per SI unit?

Type Multiple Choice

Option mm Incorrect
Option cm Incorrect
Option Meter Correct
Option Km Incorrect
Solution
Marks 1 0

Question What is the least count of engineer steel rule?

Type Multiple Choice

Option 1 mm Incorrect
Option 0.5 mm Correct
Option 2 mm Incorrect
Option 3 mm Incorrect
Solution
Marks 1 0

Question Which marking device used to scribe circle?

Type Multiple Choice

Option Jenny calliper Incorrect
Option Inside calliper Incorrect
Option Spring divider Correct
Option Outside calliper Incorrect
Solution
Marks 1 0

Question Which instrument is used to check the right angle?

19
 20

Type Multiple Choice

Option Steel rule Incorrect
Option Try square Correct
Option Firm joint calliper Incorrect
Option Spring Joint calliper Incorrect
Solution
Marks 1 0

Question What is the use of outside calliper?

Type Multiple Choice

Option Check the flatness Incorrect
Option Check the angle Incorrect
Option Check the internal dia of the job Incorrect
Option Check the external dia of the job Correct
Solution
Marks 1 0

Question What is the name of the calliper?

Type Multiple Choice

Option Inside calliper Incorrect
Option Outside calliper Incorrect
Option Firm joint calliper Incorrect
Option Spring joint outside calliper Correct
Solution
Marks 1 0

Question What is the name of the calliper?

Type Multiple Choice

Option Firm joint calliper Incorrect

20
 21

Option Spring joint outside calliper Incorrect

Option Inside calliper Incorrect
Option Jenny calliper Correct
Solution
Marks 1 0

Question Name the part marked as X

Type Multiple Choice

Option Snug Incorrect
Option Spindle Incorrect
Option Guide pin Correct
Option Rockerarm Incorrect
Solution
Marks 1 0

Question Name the part marked X in universal surface gauge?

Type Multiple Choice

Option Snug Incorrect
Option Scribe Incorrect
Option Rocker arm Correct
Option Vee groove Incorrect
Solution
Marks 1 0

Question What is the point angle of centre punch?

Type Multiple Choice

Option 30° Incorrect
Option 45° Incorrect
Option 60° Incorrect

21
 22

Option 90° Correct

Solution
Marks 1 0

Question What is the angle of prick punch?

Type Multiple Choice

Option 60° Correct
Option 90° Incorrect
Option 120° Incorrect
Option 180° Incorrect
Solution
Marks 1 0

Question What is the name of the chisel?

Type Multiple Choice

Option Flat chisel Incorrect
Option Cross cut chisel Correct
Option Half round nose chisel Incorrect
Option Diamond point chisel Incorrect
Solution
Marks 1 0

Question What is the name of the chisel?

Type Multiple Choice

Option Flat chisel Incorrect
Option Crosscut chisel Incorrect
Option Half round nose chisel Correct
Option Diamond point chisel Incorrect
Solution

22
 23

Marks 1 0

Question What is the name of the chisel?

Type Multiple Choice

Option Flat chisel Incorrect
Option Crosscut chisel Incorrect
Option Half round nose chisel Incorrect
Option Diamond point chisel Correct
Solution
Marks 1 0

Question What is the name of part marked as X?

Type Multiple Choice

Option Face Incorrect
Option Pein Correct
Option Cheek Incorrect
Option Eye hole Incorrect
Solution
Marks 1 0

Question What is the name of the hammer part marked as X?|

Type Multiple Choice

Option Cheek Correct
Option Wedge Incorrect
Option Face Incorrect
Option Eye hole Incorrect
Solution
Marks 1 0

23
 24

Question What is the name of the device?

Type Multiple Choice

Option Pipe vice Incorrect
Option Hand vice Incorrect
Option Pin vice Incorrect
Option Bench vice Correct
Solution
Marks 1 0

Question What is the name of the vice?

Type Multiple Choice

Option Pipe vice Correct
Option Hand vice Incorrect
Option Tool maker vice Incorrect
Option Bench vice Incorrect
Solution
Marks 1 0

Question What is the name of the plier?

Type Multiple Choice

Option Slip-joint plier Incorrect
Option End cutting plier Correct
Option Flat nose plier Incorrect
Option Side cutting plier Incorrect
Solution
Marks 1 0

Question What is the name of the tool?

24
 25

Type Multiple Choice

Option Jack Incorrect
Option Puller Correct
Option Wrench Incorrect
Option Extractor Incorrect
Solution
Marks 1 0

Question What is the working media of pneumatic tool?

Type Multiple Choice

Option Oil Incorrect
Option Air Correct
Option Water Incorrect
Option Kerosene Incorrect
Solution
Marks 1 0

Question What is the name of the screw driver?

Type Multiple Choice

Option Recess screw driver Incorrect
Option Ratchet screw driver Correct
Option Stumpy screw driver Incorrect
Option Offset screw driver Incorrect
Solution
Marks 1 0

Question What is the material used to make Allen keys?

Type Multiple Choice

Option Cast iron Incorrect

25
 26

Option Aluminium alloy Incorrect

Option High speed steel Incorrect
Option Chrome vanadium steel Correct
Solution
Marks 1 0

Question What is the use of a bench vice?

Type Multiple Choice

Option To hold a work piece Correct
Option To hold a tool Incorrect
Option To hold a work table Incorrect
Option To hold a chuck Incorrect
Solution
Marks 1 0

Question What is the name of the spanner

Type Multiple Choice

Option Open spanner Incorrect
Option Tubular spanner Incorrect
Option Socket spanner Correct
Option Ring spanner Incorrect
Solution
Marks 1 0

Question What is the name of the spanner?

Type Multiple Choice

Option Socket spanner Incorrect
Option Tubular spanner Incorrect
Option Hook spanner Incorrect

26
 27

Option Adjustable spanner Correct

Solution
Marks 1 0

Question Calculate the value of 1 vernier scale in the figure.

Type Multiple Choice

Option 0.06 Units Correct
Option 0.07 Units Incorrect
Option 0.08 Units Incorrect
Option 0.09 Units Incorrect
Solution
Marks 1 0

Question What is the name of the part marked as X in vernier calliper?

Type Multiple Choice

Option Beam Incorrect
Option Lock screw Incorrect
Option Sliding unit Correct
Option Movable jaw Incorrect
Solution
Marks 1 0

Question What is the least count of vernier calliper in metric system?

Type Multiple Choice

Option 0.1 mm Incorrect
Option 0.01 mm Incorrect
Option 0.02 mm Correct

Option 0.001 mm Incorrect

Solution

27
 28

Marks 1 0

Question Which measuring instrument used to measuring inside, outside and depth
of work piece?
Type Multiple Choice
Option Steel rule Incorrect
Option Micrometer Incorrect
Option Dial caliper Incorrect
Option Vernier caliper Correct
Solution
Marks 1 0

Question Which part of vernier calliper used to measure internal and external
measurement?
Type Multiple Choice
Option Beam Incorrect
Option Sliding unit Incorrect
Option Fixed jaw Incorrect
Option Movable jaw Correct
Solution
Marks 1 0

Question What is the reading of vernier calliper with theleastcountof0.1mm?|

Type Multiple Choice

Option 44.8 mm Incorrect
Option 44.4 mm Correct
Option 44.6 mm Incorrect
Option 45.2mm Incorrect
Solution
Marks 1 0

28
 29

Question What is the reading of vernier calliper with theleastcountof0.1mm?

Type Multiple Choice

Option 0.03mm Incorrect
Option 0.3mm Correct
Option 0.003mm Incorrect
Option 1.03mm Incorrect
Solution
Marks 1 0

Question Name the part marked X in vernier calliper

Type Multiple Choice

Option Incorrect
54

Option 54.2 Incorrect

Option 54.4 Correct
Option 55.4 Incorrect
Solution
Marks 1 0

Question What is the smallest possible measurement that can be taken with the
depth micrometer?
Type Multiple Choice
Option 0.01mm Correct
Option 0.02mm Incorrect
Option 0.001 mm Incorrect
Option 0.002 mm Incorrect
Solution
Marks 1 0

Question What is the measuring instrument used to measure diameter of a piston pin?

29
 30

Type Multiple Choice

Option Depth micrometer Incorrect
Option Inside micrometer Incorrect
Option Outside micrometer Correct
Option 3 point internal micrometer Incorrect
Solution
Marks 1 0

Question What is the reading of the outside micrometer

Type Multiple Choice

Option 8.20 mm Incorrect
Option 8.59 mm Incorrect
Option 8.69 mm Correct
Option 8.44 mm Incorrect
Solution
Marks 1 0

Question What is the reading of the outside micrometer(0-25mm)?

Type Multiple Choice

Option 2.25 Incorrect
Option 2.5 Incorrect
Option 2.75 Correct
Option 20.75 Incorrect
Solution
Marks 1 0

Question Which instrument not used to check inside size of slots ?

Type Multiple Choice

Option Vernier calliper Incorrect

30
 31

Option Outside micrometer Correct

Option Inside micrometer Incorrect
Option Telescopic gauge Incorrect
Solution
Marks 1 0

Question What is to be checked with vacuum gauge?

Type Multiple Choice

Option Leak in the cooling system Incorrect
Option Leak in the air brake system Incorrect
Option Leak in the inlet-manifold system Correct
Option Leak in the hydraulic brake system Incorrect
Solution
Marks 1 0

Question What is the Purpose of chisel?

Type Multiple Choice

Option Grinding Incorrect
Option Machining Incorrect
Option Reaming Incorrect
Option Chipping Correct
Solution
Marks 1 0

Question Which chisel is used to remove metal from large flat surface?

Type Multiple Choice

Option Flat chisel Correct
Option Cross cut chisel Incorrect
Option Half round nose chisel Incorrect

31
 32

Option Diamond point chisel Incorrect

Solution
Marks 1 0

Question Which type of chisel used for squaring material at the corners?

Type Multiple Choice

Option Flat chisel Incorrect
Option Half round nose chisel Incorrect
Option Cross cut chisel Incorrect
Option Diamond point chisel Correct
Solution
Marks 1 0

Question What is the purpose of the eye hole in a hammer?

Type Multiple Choice

Option Strike the job Incorrect
Option Fix the handle Correct
Option Reduce the weight Incorrect
Option Stamp the details Incorrect
Solution
Marks 1 0

Question What is the use of lump hammer?

Type Multiple Choice

Option Strike the metal Incorrect
Option Punch the metal Incorrect
Option Spread the metal Incorrect
Option Light demolition work Correct
Solution

32
 33

Marks 1 0

Question What is the purpose of mallets?

Type Multiple Choice

Option Riveting operation Incorrect
Option Strike on soft metal Correct
Option Strike on hard metal Incorrect
Option Spread the metal to all sides Incorrect
Solution
Marks 1 0

Question Which screw driver is used in the space limitation?

Type Multiple Choice

Option Cross-recers screwdriver Incorrect
Option Ratchet screw driver Incorrect
Option Stumpy screw driver Correct
Option Offset screw driver Incorrect
Solution
Marks 1 0

Question Which vice is used to hold a very small diameter job?

Type Multiple Choice

Option Pipe vice Incorrect
Option Hand vice Incorrect
Option Pin vice Correct
Option Toolmaker’s vice Incorrect
Solution
Marks 1 0

33
 34

Question Which condition the tyre pressure not to be checked?

Type Multiple Choice

Option Tyre is cold Incorrect
Option Tyre is carrying load Incorrect
Option Before start of journey Incorrect
Option Tyre is hot after long run Correct
Solution
Marks 1 0

Question What is the name of the screw?

Type Multiple Choice

Option Hexagon head screw Incorrect
Option Hexagon socket head thumb screw Correct
Option Square head counter sunk head screws Incorrect
Option Thump screws Incorrect
Solution
Marks 1 0

Question What is the name of the washer?

Type Multiple Choice

Option Plain washer Incorrect
Option Thumb Screw Correct
Option Spring washer Incorrect
Option Toothed lock washer Incorrect
Solution
Marks 1 0

Question What is the name of the screw?

Type Multiple Choice

34
 35

Option Grub screw Incorrect

Option Thump screw Incorrect
Option Hexagonal screw Incorrect
Option Counter sink head screw Correct
Solution
Marks 1 0

Question What is the name of the screw?

Type Multiple Choice

Option Set screw Incorrect
Option Thump screw Correct
Option Hexagonal screw Incorrect
Option Grub screws Incorrect
Solution
Marks 1 0

Question What is the name of the plier?

Type Multiple Choice

Option Side cutting plier Correct
Option Nose plier Incorrect
Option Circlip plier Incorrect
Option End cutting plier Incorrect
Solution
Marks 1 0

Question What is the name of the counter sink screw?

Type Multiple Choice

Option Slotted counter sink head screw Correct
Option Slotted raised counter sink head screw Incorrect

35
 36

Option Cross-recessed counter sink head screw Incorrect

Option Cross recessed raised counter sink head screw Incorrect
Solution
Marks 1 0

Question What is the name of the counter sink screw?

Type Multiple Choice

Option Slotted counter sink Incorrect
Option cross-recessed counter sink head screw Correct
Option Slotted raised counter sink Incorrect
Option Cross recessed raised countersink Incorrect
Solution
Marks 1 0

Question What is the name of the countersunk screw?

Type Multiple Choice

Option Slotted counter sink screw Incorrect
Option cross-recessed counter sink head screw Incorrect
Option Slotted raised counter sink head screw Correct
Option Cross recessed raised counter sink head Incorrect
Solution
Marks 1 0

Question What is the type of the machine screw head?

Type Multiple Choice

Option Pan head Correct
Option Round head Incorrect
Option Cheese head Incorrect
Option Raised cheese head Incorrect

36
 37

Solution
Marks 1 0

Question What is the name of the nut?

Type Multiple Choice

Option Squarenut Incorrect
Option Lock nut Incorrect
Option Castle nut Correct
Option Self locking nut Incorrect
Solution
Marks 1 0

Question What is the name of nut?

Type Multiple Choice

Option Lock nut Correct
Option Castle nut Incorrect
Option Square nut Incorrect
Option Slotted round nut Incorrect
Solution
Marks 1 0

Question Which nut is used for structural and machine tool construction?

Type Multiple Choice

Option Square nut Incorrect
Option Hexagonal nut Correct
Option Wing nut Incorrect
Option Castle nut Incorrect
Solution
Marks 1 0

37
 38

Question What is the name of the tool?

Type Multiple Choice

Option Face wrench Correct
Option Hook wrench Incorrect
Option Pin wrench Incorrect
Option Face pin wrench Incorrect
Solution
Marks 1 0

Question What is the name of the tool?

Type Multiple Choice

Option Face wrench Incorrect
Option Hook wrench Correct
Option Pin wrench Incorrect
Option Face pin wrench Incorrect
Solution
Marks 1 0

Question What is the name of the nut marked X?

Type Multiple Choice

Option Chuck nut Incorrect
Option Thumb Nut Correct
Option Domed cap nut Incorrect
Option Hexagonal nut with collar Incorrect
Solution
Marks 1 0

38
 39

Question What is the name of the nut?

Type Multiple Choice

Option Lock nut Incorrect
Option Thumbnut Incorrect
Option Domed cap nut Correct
Option Hexagonal nut with collar Incorrect
Solution
Marks 1 0

Question What is the name of the nut?

Type Multiple Choice

Option Thumbnut Incorrect
Option Domed cap nu Incorrect
Option Hexagonal nut with collar Correct
Option Chuck nut Incorrect
Solution
Marks 1 0

Question Which type of nut required to align the axle shaft hole and slot of the nut
for locking?
Type Multiple Choice
Option Castle nut Correct
Option Chuck nut Incorrect
Option Thumbnut Incorrect
Option Self lock nut Incorrect
Solution
Marks 1 0

Question What is the name of the key?

39
 40

Type Multiple Choice

Option Hollow saddle key Correct
Option Flat saddle key Incorrect
Option Circular taper key Incorrect
Option Parallel sunk key Incorrect
Solution
Marks 1 0

Question What is the name of the key?

Type Multiple Choice

Option Hollow saddle key Incorrect
Option Flat saddle key Correct
Option Circular taper key Incorrect
Option Parallel sunk key Incorrect
Solution
Marks 1 0

Question Which type of locking device used on shaft and similar parts?|

Type Multiple Choice

Option Split pin Incorrect
Option Wire lock Incorrect
Option Internal circlip Incorrect
Option External circlip Correct
Solution
Marks 1 0

Question Which type of the key used on the shaft and hub?

Type Multiple Choice

Option Hollow saddle key Incorrect

40
 41

Option Flat saddle key Incorrect

Option Circular taper key Incorrect
Option Parallel sunk key Correct
Solution
Marks 1 0

Question What is the name of bolt?

Type Multiple Choice

Option Anti fatigue bolt Incorrect
Option Bolt with clearance hole Incorrect
Option ‘T’ Bolt Incorrect
Option Body fit bolt Correct
Solution
Marks 1 0

Question What is the name of the key?

Type Multiple Choice

Option Circular taper key Incorrect
Option Parallel sunk key Incorrect
Option Gib-head key Correct
Option Wood ruff key Incorrect
Solution
Marks 1 0

Question What is the method of the metal cutting operation?

Type Multiple Choice

Option Abrasion Correct
Option Fusion Incorrect
Option Incision Incorrect

41
 42

Option Rough grinding Incorrect

Solution
Marks 1 0

Question What is the method of metal cutting operation?

Type Multiple Choice

Option Abrasion Incorrect
Option Fusion Correct
Option Incision Incorrect
Option Rough grinding Incorrect
Solution
Marks 1 0

Question What is the name of the file?

Type Multiple Choice

Option Single cut Correct
Option Double cut Incorrect
Option Rasp cut Incorrect
Option Curved cut Incorrect
Solution
Marks 1 0

Question What is the name of the file?

Type Multiple Choice

Option Single cut Incorrect
Option Double cut Correct
Option Rasp cut Incorrect
Option Curved cut Incorrect
Solution

42
 43

Marks 1 0

Question What is the name of the file?

Type Multiple Choice

Option Single cut Incorrect
Option Double cut Incorrect
Option Rasp cut Correct
Option Curved cut Incorrect
Solution
Marks 1 0

Question What is the type of hacksaw frame?

Type Multiple Choice

Option Deep cutting frame Incorrect
Option Adjustable flat type frame Incorrect
Option Adjustable Tubular Correct
Option Solid frame Incorrect
Solution
Marks 1 0

Question Name the method of removing broken stud?

Type Multiple Choice

Option Prick punch method Incorrect
Option Filling square form method Incorrect
Option Making drill hole method Correct
Option Ezy-out method Incorrect
Solution
Marks 1 0

43
 44

Question Name the method of removing broken stud?

Type Multiple Choice

Option Making drill hole method Incorrect
Option Ezy-out method Correct
Option Filling square form method Incorrect
Option Prick punch method Incorrect
Solution
Marks 1 0

Question What is the name of drilling machine?

Type Multiple Choice

Option Ratchet drilling machine Incorrect
Option Bevel gear drilling machine Correct
Option Pneumatic drilling machine Incorrect
Option Breast drilling machine Incorrect
Solution
Marks 1 0

Question Which type of portable drilling machine have variable speed?

Type Multiple Choice

Option Breast hand drill Incorrect
Option Heavy duty electric hard drill Correct
Option Ratchet hand drill Incorrect
Option Bevel gear hand drill Incorrect
Solution
Marks 1 0

Question Which part of drill bit fits in to the slot of drilling machine spindle?

Type Multiple Choice

44
 45

Option Body Incorrect

Option Tang Correct
Option Flute Incorrect
Option Web Incorrect
Solution
Marks 1 0

Question What is the name of the angle marked as ‘x’?

Type Multiple Choice

Option Helix angle Incorrect
Option Rake angle Correct
Option Point angle Incorrect
Option Clearance angle Incorrect
Solution
Marks 1 0

Question What is the material of the hand tap?

Type Multiple Choice

Option Cast Iron Incorrect
Option Low carbon steel Incorrect
Option High speed steel Correct
Option Stainless steel Incorrect
Solution
Marks 1 0

Question Which nut provided with Nylon ring in the groove?

Type Multiple Choice

Option T-nut Incorrect
Option Castle nut Incorrect

45
 46

Option Slotted nut Incorrect

Option Self locking nut Correct
Solution
Marks 1 0

Question Which key used for easy fixing and removing?

Type Multiple Choice

Option Feather key Incorrect
Option Gib-Head key Correct
Option Hollow saddle key Incorrect
Option Circular tapper key Incorrect
Solution
Marks 1 0

Question Which key is used while hub slides axially on the shaft

Type Multiple Choice

Option Wood ruff key Incorrect
Option Gib-Head key Incorrect
Option Feather key Correct
Option Hollow saddle key Incorrect
Solution
Marks 1 0

Question Which key is used for tapered shaft fitting?

Type Multiple Choice

Option Wood ruff key Correct
Option Feather key Incorrect
Option Flat saddle key Incorrect
Option Hollow saddle key Incorrect

46
 47

Solution
Marks 1 0

Question What is the pitch of hacksaw blade?

Type Multiple Choice

Option Distance between adjacent teeth Correct
Option Distance between pin holes Incorrect
Option Distance between edges of blade Incorrect
Option Distance between Top and bottom edges Incorrect
Solution
Marks 1 0

Question Which type of the file used for filling wood and leather?

Type Multiple Choice

Option Rasp cut file Correct
Option Basterd file Incorrect
Option Second cut file Incorrect
Option Smooth file Incorrect
Solution
Marks 1 0

Question What is Tolerance of limits and fits system?

Type Multiple Choice

Option Difference between actual size and basic size Incorrect
Option Difference between standard and minimum size Incorrect
Option Difference between standard and maximum size Incorrect
Option Difference between maximum and minimum size Correct
Solution
Marks 1 0

47
 48

Question Which type of fit will have maximum size hole and minimum size shaft?

Type Multiple Choice

Option Interference fit Incorrect
Option Clearance fit Correct
Option Transition fit Incorrect
Option Shrinkage fit Incorrect
Solution
Marks 1 0

Question Which type of fit represent the tolerance zone of the hole and shaft over
lap each other?
Type Multiple Choice
Option Transition fit Correct
Option Clearance fit Incorrect
Option Shrinkage fit Incorrect
Option Interference fit Incorrect
Solution
Marks 1 0

Question How to hold the small jobs while working on bench grinder?

Type Multiple Choice

Option Hold the job with cotton waste Incorrect
Option Hold the job with gloves Incorrect
Option Hold the job with pliers Correct
Option Hold the job with hand Incorrect
Solution
Marks 1 0

Question What type of operation carried out on grinding wheel?

48
 49

Type Multiple Choice

Option Glazing Incorrect
Option Loading Incorrect
Option Dressing Correct
Option Pinning Incorrect
Solution
Marks 1 0

Question What is the recommended gap between tool post and grinding wheel?

Type Multiple Choice

Option 1 mm Incorrect
Option 2 mm Correct
Option 3 mm Incorrect
Option 4 mm Incorrect
Solution
Marks 1 0

Question What is the pitch of wave set in hexablade

?
Type Multiple Choice
Option 0.4 mm Incorrect
Option 0.8 mm Correct
Option 1.2mm Incorrect
Option Over 1.0 mm Incorrect
Solution
Marks 1 0

Question Which drilling machine is used to drill holesbetween6mmto12mm?

Type Multiple Choice

Option Breast drill Correct

49
 50

Option Ratchet hand drill Incorrect

Option Pneumatic hand drill Incorrect
Option Electric hand drill light duty Incorrect
Solution
Marks 1 0

Question What are the tools are used to remove the drills and sockets from the
machine spindle?
Type Multiple Choice
Option Screw driver and hammer Incorrect
Option Spanner and hammer Incorrect
Option Punch and hammer Incorrect
Option Drift and hammer Correct
Solution
Marks 1 0

Question Which angle helps in the penetration of the cutting edges in the material?

Type Multiple Choice

Option Helixangle Incorrect
Option B Point angle Incorrect
Option Clearance angle Correct
Option Rake angle Incorrect
Solution
Marks 1 0

Question Which tap in a set have 20° chamfer at its end?

Type Multiple Choice

Option Intermediate tap Incorrect
Option Taper tap Incorrect
Option Plug tap Correct

50
 51

Option Second tap Incorrect

Solution
Marks 1 0

Question Why alternate teeth are staggered in hacksaw blade?

Type Multiple Choice

Option For free cutting action Correct
Option For curve cutting action Incorrect
Option For coarse cutting action Incorrect
Option For straight cutting action Incorrect
Solution
Marks 1 0

Question Which material resist the flow of electron?

Type Multiple Choice

Option Gold Incorrect
Option Glass Correct
Option Silver Incorrect
Option Copper Incorrect
Solution
Marks 1 0

Question Which is measured by ammeter in an electricalcircuit?

Type Multiple Choice

Option Power Incorrect
Option Voltage Incorrect
Option Current Correct
Option Resistances Incorrect
Solution

51
 52

Marks 1 0

Question What is the unit of capacitance?

Type Multiple Choice

Option Ohm Incorrect
Option voltage Incorrect
Option farad Correct
Option ampere Incorrect
Solution
Marks 1 0

Question What is the name of the apparatus?

Type Multiple Choice

Option Hydrometer Correct
Option Thermometer Incorrect
Option Lactometer Incorrect
Option Barometer Incorrect
Solution
Marks 1 0

Question Name the logic gate shown in figure?

Type Multiple Choice

Option AND gate Correct
Option OR gate Incorrect
Option NOT gate Incorrect
Option NAND gate Incorrect
Solution
Marks 1 0

52
 53

Question Name the logic gate shown in figure?

Type Multiple Choice

Option AND gate Incorrect
Option OR gate Correct
Option NOT gate Incorrect
Option NAND gate Incorrect
Solution
Marks 1 0

Question What is the name of the Symbol?

Type Multiple Choice

Option OR gate Incorrect
Option AND gate Incorrect
Option NOT gate Correct
Option NAND gate Incorrect
Solution
Marks 1 0

Question Which logic gate is called as “Inverter”?

Type Multiple Choice

Option OR gate Incorrect
Option AND gate Incorrect
Option NOT gate Correct
Option NAND gate Incorrect
Solution
Marks 1 0

Question What is the name of the electrical part?|

Type Multiple Choice

53
 54

Option Fuse Correct

Option Plug Incorrect
Option Bulb Incorrect
Option Relay Incorrect
Solution
Marks 1 0

Question Which part is connected and completes the Horn circuit of the push
button pressed?
Type Multiple Choice
Option Core Incorrect
Option Tone disc Incorrect
Option Horn points Incorrect
Option Ground plate Correct
Solution
Marks 1 0

Question What does number 25 in the cable size (25/0.012) indicate?

Type Multiple Choice

Option Length of the strand Incorrect
Option Number of the strand Correct
Option Diameter of the strand Incorrect
Option Thickness of the cable Incorrect
Solution
Marks 1 0

Question What is the purpose of colour code in cables?

Type Multiple Choice

Option Colour refers the current rating Incorrect
Option Colour refers the voltage rating Incorrect

54
 55

Option Easy identification of each circuit Correct

Option Refers the size of the wire Incorrect
Solution
Marks 1 0

Question Which device have the ability to store electrical charge?

Type Multiple Choice

Option Capacitor Correct
Option Resistor Incorrect
Option Insulator Incorrect
Option Conductor Incorrect
Solution
Marks 1 0

Question What is the energy conversion of battery during discharge?

Type Multiple Choice

Option Electrical energy into heat energy Incorrect
Option Chemical energy into electrical energy Correct
Option Electrical energy into chemical energy Incorrect
Option Electrical energy into mechanical energy Incorrect
Solution
Marks 1 0

Question What is the energy conversion of battery during charging?

Type Multiple Choice

Option Electrical energy into chemical energy Correct
Option Electrical energy into heat energy Incorrect
Option Chemical energy into electrical energy Incorrect
Option Electrical energy into mechanical energy Incorrect

55
 56

Solution
Marks 1 0

Question What is the material of positive plate in the lead acid battery?

Type Multiple Choice

Option Tin Incorrect
Option Lead peroxide Correct
Option Antimony Incorrect
Option Spongy lead Incorrect
Solution
Marks 1 0

Question Which acid is used in the lead acid battery?

Type Multiple Choice

Option Nitric acid Incorrect
Option Sulphuric acid Correct
Option Hydrobromic acid Incorrect
Option Hydrochloric Incorrect
Solution
Marks 1 0

Question What is the specific gravity of fully charged battery?

Type Multiple Choice

Option 1.170 -1.200 Incorrect
Option 1.210 - 1.230 Incorrect
Option 1.240 - 1.250 Incorrect
Option 1.260 - 1.280 Correct
Solution
Marks 1 0

56
 57

Question What type of emf is produced if the conductor moved and cut the
magnetic field?
Type Multiple Choice
Option Dynamically induced emf Correct
Option Statistically induced emf Incorrect
Option Electro-chemical induced emf Incorrect
Option Electro-magnetic induced emf Incorrect
Solution
Marks 1 0

Question What is the effect of the soft Iron bar in a closed circuit?

Type Multiple Choice

Option Shock effect Incorrect
Option Heating effect Incorrect
Option Magnetic effect Correct
Option Chemical effect Incorrect
Solution
Marks 1 0

Question What is the name of the Electronic Symbol?

Type Multiple Choice

Option Diode Correct
Option Switch Incorrect
Option Battery Incorrect
Option Transistor Incorrect
Solution
Marks 1 0

57
 58

Question Which electronic component is used as a solid state switch?

Type Multiple Choice

Option Inductor Incorrect
Option Resistor Incorrect
Option Capacitor Incorrect
Option Transistor Correct
Solution
Marks 1 0

Question Which is a temperature sensitive resistor?

Type Multiple Choice

Option Diode Incorrect
Option Thyristor Incorrect
Option Thermistor Correct
Option Transistor Incorrect
Solution
Marks 1 0

Question What is the ampere hour rating of battery deliver 5 ampere and period of
20 hours?
Type Multiple Choice
Option 80 Ampere hour Incorrect
Option 90 Ampere hour Incorrect
Option 100 Ampere hour Correct
Option 110 Ampere hour Incorrect
Solution
Marks 1 0

Question What is the name of the circuit?

58
 59

Type Multiple Choice

Option Open circuit Correct
Option Short circuit Incorrect
Option Closed circuit Incorrect
Option Parallel circuit Incorrect
Solution
Marks 1 0

Question What is the net resistance ‘R’ if ‘R1’and

‘R2’resistanceareconnectedinseries?
Type Multiple Choice
Option R = R1 + R2 | R = R1 + R2 Correct
Option R = R1 – R2 | R = R1 – R2 Incorrect
Option R = R1 x R2 | R = R1 x R2 Incorrect
Option R = R1/R2 | R =R1/R2 Incorrect
Solution
Marks 1 0

Question What is the name of electrical symbol?

Type Multiple Choice

Option Cell Incorrect
Option Battery Correct
Option Earth Incorrect
Option Resistance Incorrect
Solution
Marks 1 0

Question What is the name of the electrical measuring instrument?

Type Multiple Choice

Option Ammeter Incorrect

59
 60

Option Volt meter Incorrect

Option Watt meter Incorrect
Option Multi meter Correct
Solution
Marks 1 0

Question What is the name of the part marked X in nucleus?

Type Multiple Choice

Option Atom Incorrect
Option Proton Correct
Option Neutron Incorrect
Option Electron Incorrect
Solution
Marks 1 0

Question Which is the semi conductor material?

Type Multiple Choice

Option Iron Incorrect
Option Gold Incorrect
Option Silicon Correct
Option Carbon Incorrect
Solution
Marks 1 0

Question Which component is made by semi conductor material?

Type Multiple Choice

Option Switch Incorrect
Option Resistor Incorrect
Option Capacitor Incorrect

60
 61

Option Transistor Correct

Solution
Marks 1 0

Question What is the name of central part of an atom?

Type Multiple Choice

Option Proton Incorrect
Option Electron Incorrect
Option Neutron Incorrect
Option Nucleus Correct
Solution
Marks 1 0

Question How the flow of Electron is called

Type Multiple Choice

Option Current Correct
Option Power Incorrect
Option Voltage Incorrect
Option Resistance Incorrect
Solution
Marks 1 0

Question Which Law state that “The current is directly proportional toʺ the voltage
and inversely proportional to the resistance
Type Multiple Choice
Option Ohm’s Law Correct
Option Hook’s Law Incorrect
Option Boyle’s Law Incorrect
Option Newton’s Law Incorrect
Solution

61
 62

Marks 1 0

Question Which electrical measuring instruments is fitted on the vehicle panel

board?
Type Multiple Choice
Option Ammeter Correct
Option Voltmeter Incorrect
Option Wattmeter Incorrect
Option Ohm meter Incorrect
Solution
Marks 1 0

Question Which circuit the ballast resistor is used?

Type Multiple Choice

Option Horn circuit Incorrect
Option Wiper circuit Incorrect
Option Flasher circuit Correct
Option Head lamp circuit Incorrect
Solution
Marks 1 0

Question What type of resistor is used in the vehicle flasher unit?

Type Multiple Choice

Option Ballast resistor Correct
Option Film resistor Incorrect
Option Printed resistor Incorrect
Option Integrated resistor Incorrect
Solution
Marks 1 0

62
 63

Question What is the advantage of free maintenance sealed battery?

Type Multiple Choice

Option No need for check and top up distilled water Correct
Option No need for recharging of battery Incorrect
Option No chance for sulphation of battery terminals Incorrect
Option No need for disconnect the terminals to remove Incorrect
battery
Solution
Marks 1 0

Question How the battery capacity is expressed?

Type Multiple Choice

Option Ampere-hour rating Correct
Option Voltage - hour rating Incorrect
Option Ampere rating Incorrect
Option Voltage rating Incorrect
Solution
Marks 1 0

Question Which are the semi conductor materials?

Type Multiple Choice

Option Arsenic and boron Incorrect
Option Gallium and indium Incorrect
Option Germanium and silicon Correct
Option Aluminium and antimony Incorrect
Solution
Marks 1 0

Question What is the Quenching media of normalising?

63
 64

Type Multiple Choice

Option Water spray Incorrect
Option Open air Correct
Option Oil bath Incorrect
Option Water bath Incorrect
Solution
Marks 1 0

Question What is the name of welding device?

Type Multiple Choice

Option Motor generator Incorrect
Option Engine generator Correct
Option Regulator Incorrect
Option Alternator Incorrect
Solution
Marks 1 0

Question What is the name of edge preparation and set up in welding process?

Type Multiple Choice

Option Single ‘V’ Butt Correct
Option Flange butt Incorrect
Option Lap butt Incorrect
Option Corner butt Incorrect
Solution
Marks 1 0

Question What is the name of edge preparation method used in welding process?

Type Multiple Choice

Option Single ‘V’ Butt Correct

64
 65

Option Soldering Incorrect

Option Riveting Incorrect

Option Brazing Incorrect

Solution
Marks 1 0

Question Which type of physical transformation takes place during arc welding
process?
Type Multiple Choice
Option Colour transfer Incorrect
Option Metal transfer Correct
Option Current transfer Incorrect
Option Heat transfer Incorrect
Solution
Marks 1 0

Question What is the colour of acetylene gas cylinder?

Type Multiple Choice

Option Red Incorrect
Option Maroon Correct
Option Black Incorrect
Option Peacock blue Incorrect
Solution
Marks 1 0

Question What is the colour of oxygen gas cylinder?

Type Multiple Choice

Option Red Incorrect
Option Maroon Incorrect
Option Black Correct

65
 66

Option Peacock blue Incorrect

Solution
Marks 1 0

Question What is the name of oxy- acetylene gas flame?

Type Multiple Choice

Option Arc flame Incorrect
Option Neutral flame Correct
Option Carburising flame Incorrect
Option Oxidising flame Incorrect
Solution
Marks 1 0

Question What is the name of the weld joint?

Type Multiple Choice

Option Double ‘V’ butt Incorrect
Option Double ‘U’ butt Incorrect
Option Single bevel butt Correct
Option Double j butt Incorrect
Solution
Marks 1 0

Question Name the welding process?

Type Multiple Choice

Option Plasma arc welding Incorrect
Option Electro-slag welding Correct
Option Gas metal arc welding Incorrect
Option Submerged arc welding Incorrect
Solution

66
 67

Marks 1 0

Question What is the dia of medium coated MS electrode used in fillet weld lap joint
with 110/120 Amps welding current?|
Type Multiple Choice
Option 1.0 mm Incorrect
Option 1.5 mm Incorrect
Option 2.5 mm Incorrect
Option 3.15mm Correct
Solution
Marks 1 0

Question What is the electrode angle with weld?

Type Multiple Choice

Option 70° to80° Correct

Option 50° to60° Incorrect

Option 45° to50° Incorrect
Option 35° to 40° Incorrect
Solution
Marks 1 0

Question Which is protecting the eyes from harmful rays of the electric arc welding?

Type Multiple Choice

Option Helmet Incorrect
Option Leather 1apron Incorrect
Option Leather gloves Incorrect
Option Welding helmet screen Correct
Solution
Marks 1 0

67
 68

Question What is the name of equipment?

Type Multiple Choice

Option Motor generator set Incorrect
Option Engine generator set Incorrect
Option DC generator machine Incorrect
Option Alternating current welding machine Correct
Solution
Marks 1 0

Question What is the name of part marked as X?

Type Multiple Choice

Option Regulator Incorrect
Option Blow pipe Incorrect
Option Spark lighter Correct
Option None-return disc Incorrect
Solution
Marks 1 0

Question Which solution is used for acetylene gas connection leakage test?

Type Multiple Choice

Option Kerosene Incorrect
Option Naked fire Incorrect
Option Soap water Correct
Option Fresh water Incorrect
Solution
Marks 1 0

Question What is the colour of hose carrying oxygen?

Type Multiple Choice

68
 69

Option Red Incorrect

Option Black Correct
Option Maroon Incorrect
Option Peacock blue Incorrect
Solution
Marks 1 0

Question What is the colour of hose carrying

Type Multiple Choice

Option Red Incorrect
Option Black Incorrect
Option Maroon Correct
Option Peacock blue Incorrect
Solution
Marks 1 0

Question What is the name of part marked as ‘X’?

Type Multiple Choice

Option Safety plug Correct
Option Valve socket Incorrect
Option Valve spindle Incorrect
Option Dissolved acetylene Incorrect
Solution
Marks 1 0

Question What is the name of process?

Type Multiple Choice

Option Annealing Incorrect
Option Carburising Correct

69
 70

Option Normalising Incorrect

Option Case hardening Incorrect
Solution
Marks 1 0

Question Which type of hardening used eddy current in the metal bar?

Type Multiple Choice

Option Flame hardening Incorrect
Option Nitriding hardening Incorrect
Option Induction hardening Correct
Option Annealing hardening Incorrect
Solution
Marks 1 0

Question Which type of hardening used for cam shaft production?

Type Multiple Choice

Option Annealing Incorrect
Option Carburising Incorrect
Option Normalising Incorrect
Option Induction hardening Correct
Solution
Marks 1 0

Question What is the name of process?

Type Multiple Choice

Option Nitriding Correct
Option Annealing Incorrect
Option Carburising Incorrect
Option Induction hardening Incorrect

70
 71

Solution
Marks 1 0

Question What is the name of gas flame?

Type Multiple Choice

Option Neutral flame Incorrect
Option Starting flame Incorrect
Option Oxidising flame Incorrect
Option Carburising flame Correct
Solution
Marks 1 0

Question What is the name of part marked as X?

Type Multiple Choice

Option Nozzle Incorrect
Option Handle Incorrect
Option Oxygen control valve Correct
Option Acetylene control valve Incorrect
Solution
Marks 1 0

Question What is the name of part marked as X?

Type Multiple Choice

Option Switch Correct
Option Ceramic nozzle Incorrect
Option Welding current Incorrect
Option Tungsten electrode Incorrect
Solution
Marks 1 0

71
 72

Question What is the name of part marked as ‘X’?

Type Multiple Choice

Option Pilot arc Incorrect
Option Electrode Incorrect
Option Weld pool Incorrect
Option Contact tube Correct
Solution
Marks 1 0

Question Which one is the heat treatment process?

Type Multiple Choice

Option Casting Incorrect
Option Machining Incorrect
Option Welding Incorrect
Option Annealing Correct
Solution
Marks 1 0

Question Which quenching media applied in the flame hardening process?

Type Multiple Choice

Option Still air Incorrect
Option Oil bath Incorrect
Option Brine solution bath Incorrect
Option Water spray Correct
Solution
Marks 1 0

72
 73

Question What is the purpose of hardening?

Type Multiple Choice

Option Increase ductility Incorrect
Option Increase malleability Incorrect
Option Increase strength Correct
Option Increase brittleness Incorrect
Solution
Marks 1 0

Question What is the purpose of annealing?

Type Multiple Choice

Option Improve hardness Incorrect
Option Improve machinability Correct
Option Improve brittleness Incorrect
Option Improve weld ability Incorrect
Solution
Marks 1 0

Question What is the advantage of AC arc welding machine?

Type Multiple Choice

Option More initial cost Incorrect
Option Freedom from arc blow Correct
Option More maintenance cost Incorrect
Option Un suitable for non ferrous metal Incorrect
Solution
Marks 1 0

Question What is the advantage of using rectifier set in arc welding machine?

Type Multiple Choice

73
 74

Option Suitable for all ferrous and non-ferrous Correct

Option Initial cost is lower Incorrect
Option Maintenance cost in less Incorrect
Option Not special safety precaution required Incorrect
Solution
Marks 1 0

Question What is the name of welding process?

Type Multiple Choice

Option Arc welding Correct
Option Carbon arc welding Incorrect
Option Plasma arc welding Incorrect
Option Submerged arc welding Incorrect
Solution
Marks 1 0

Question Which machine can be used anywhere in the field for welding away from
electric main supply?
Type Multiple Choice
Option Motor generator set Incorrect
Option Engine generator set Correct
Option AC arc welding machine Incorrect
Option AC welding transformer with a rectifier Incorrect
Solution
Marks 1 0

Question Which one of the following metals cannot be welded by AC welding

machine?
Type Multiple Choice
Option Brass Correct

74
 75

Option Cast iron Incorrect

Option Mild steel Incorrect
Option High carbon steel Incorrect
Solution
Marks 1 0

Question Which is the safety method for carry the oxy-acetylene gas cylinders?

Type Multiple Choice

Option Rolling Incorrect
Option Sliding Incorrect
Option Dragging Incorrect
Option Use a trolley Correct
Solution
Marks 1 0

Question Which is the stage of heat treatment process?

Type Multiple Choice

Option Cooling the metal Incorrect
Option Heating the metal slowly Correct
Option Hold at a given temperature Incorrect
Option Heat and cool the metal as soon as possible Incorrect
Solution
Marks 1 0

Question What is the importance of case hardening?|

Type Multiple Choice

Option To increase softness Incorrect
Option To with stand wear resistance Correct
Option To with stand heavy load Incorrect

75
 76

Option To decrease the brittleness Incorrect

Solution
Marks 1 0

Question Which valve to be closed first while gas flames napsout and backfire?

Type Multiple Choice

Option Oxygen valve in cylinder Incorrect
Option Oxygen valve at blowpipe Correct
Option Acetylene valve in cylinder Incorrect
Option Acetylene valve at blow pipe Incorrect
Solution
Marks 1 0

Question Which gas cutting process is suitable for all position, location and under
water?
Type Multiple Choice
Option Gas cutting Incorrect
Option Plasma cutting Correct
Option Manual cutting Incorrect
Option Machine cutting Incorrect
Solution
Marks 1 0

Question Which device is used in hydraulic brake system?

Type Multiple Choice

Option Air tank Incorrect
Option Master cylinder Correct
Option Pressure gauge Incorrect
Option Un loader cylinder Incorrect
Solution

76
 77

Marks 1 0

Question What is the name of the part marked as ‘X’?

Type Multiple Choice

Option Air tank Incorrect
Option Air pressure gauge Incorrect
Option Brake valve Incorrect
Option Compressor Correct
Solution
Marks 1 0

Question Which type of pump used in the hydraulic jack?|

Type Multiple Choice

Option Gear pump Incorrect
Option Plunger pump Correct
Option Vane pump Incorrect
Option Internal gear pump Incorrect
Solution
Marks 1 0

Question Which device converts mechanical into pneumatic energy?

Type Multiple Choice

Option Actuator Incorrect
Option Generator Incorrect
Option Alteration Incorrect
Option Compressor Correct
Solution
Marks 1 0

77
 78

Question Which device converts hydraulic energy in to mechanical energy?

Type Multiple Choice

Option Actuator Correct
Option Regulator Incorrect
Option Compressor Incorrect
Option Control Valve Incorrect
Solution
Marks 1 0

Question What is the name of the hydraulics cylinder?

Type Multiple Choice

Option Double rod cylinder Incorrect
Option Double acting cylinder Incorrect
Option Single acting cylinder Correct
Option Rotary acting cylinder Incorrect
Solution
Marks 1 0

Question What is the name of the valve?

Type Multiple Choice

Option Pressure relief valve Incorrect
Option Bypass valve Incorrect
Option Check valve Correct
Option Inlet valve Incorrect
Solution
Marks 1 0

Question What is the name of the valve?

Type Multiple Choice

78
 79

Option Check valve Incorrect

Option Choke valve Incorrect
Option Throttle valve Correct
Option Pressure relief valve Incorrect
Solution
Marks 1 0

Question What is the name of the manual symbol?

Type Multiple Choice

Option Roller operated Incorrect
Option Foot pedal Correct
Option Push Button Incorrect
Option General button Incorrect
Solution
Marks 1 0

Question What is the name of the mechanical symbol?

Type Multiple Choice

Option Plunger Incorrect
Option Push button Incorrect
Option Roller Correct
Option Foot Pedal Incorrect
Solution
Marks 1 0

Question What is the name of the part marked as ‘X’?

Type Multiple Choice

Option Slave cylinder Incorrect
Option Master cylinder Correct

79
 80

Option Air cylinder Incorrect

Option Wheel cylinder Incorrect
Solution
Marks 1 0

Question What is the name of the part marked as ‘X’?

Type Multiple Choice

Option Steering gear Incorrect
Option Piston rod Incorrect
Option Pressure line Incorrect
Option Fluid reservoir Correct
Solution
Marks 1 0

Question Which is the power source of the pneumatic system?

Type Multiple Choice

Option Actuator Incorrect
Option Control value Incorrect
Option Air Compressor Correct
Option Air Service unit Incorrect
Solution
Marks 1 0

Question What is the type of the compressor?

Type Multiple Choice

Option Gear type Incorrect
Option Vane type Incorrect
Option Rotary type Incorrect
Option Reciprocating type Correct

80
 81

Solution
Marks 1 0

Question Which law is applied in hydraulic brake system?

Type Multiple Choice

Option Boyle’s law Incorrect
Option Charles law Incorrect
Option Pascal’s law Correct
Option Newton’s law Incorrect
Solution
Marks 1 0

Question Which act as a seal in the external gear pump?

Type Multiple Choice

Option Housing Incorrect
Option Drive gear Incorrect
Option Driver gear Incorrect
Option Gear meshing Correct
Solution
Marks 1 0

Question What is the name of drive pump?

Type Multiple Choice

Option Van pump Incorrect
Option Plunger pump Incorrect
Option Internal gear drive pump Incorrect
Option External gear drive pump Correct
Solution
Marks 1 0

81
 82

Question What is the name of pump?

Type Multiple Choice

Option Rotor Pump Incorrect
Option Plunger pump Incorrect
Option Internal gear pump Correct
Option External gear pump Incorrect
Solution
Marks 1 0

Question Which type of clutch system used in the slave cylinder?

Type Multiple Choice

Option Vacuum clutch Incorrect
Option Hydraulic clutch Correct
Option Overrunning clutch Incorrect
Option Electromagnetic clutch Incorrect
Solution
Marks 1 0

Question What is the name of NDT method?

Type Multiple Choice

Option Ultrasonic test Incorrect
Option Eddy current test Incorrect
Option Magnetic particle test Correct
Option Radiographic test Incorrect
Solution
Marks 1 0

Question What is the name of pneumatic Component marked as ‘X’?

82
 83

Type Multiple Choice

Option Actuator Correct
Option Compressor Incorrect
Option Control valve Incorrect
Option Reservoir tank Incorrect
Solution
Marks 1 0

Question Name the pneumatic component marked as X?

Type Multiple Choice

Option FRL Correct
Option Actuator Incorrect
Option Compressor Incorrect
Option Reservoir tank Incorrect
Solution
Marks 1 0

Question Name the pneumatic component marked as X?

Type Multiple Choice

Option Actuator Incorrect
Option Compressor Incorrect
Option Control valve Correct
Option Reservoir tank Incorrect
Solution
Marks 1 0

Question Name the pneumatic component marked as X

Type Multiple Choice

Option Actuator Incorrect

83
 84

Option Compressor Correct

Option Control valve Incorrect
Option Reservoir tank Incorrect
Solution
Marks 1 0

Question What is the name of NDT method?

Type Multiple Choice

Option Ultrasonic testing Incorrect
Option Radiographic testing Incorrect
Option Liquid penetrate testing Correct
Option Electromagnetic yoke testing Incorrect
Solution
Marks 1 0

Question What is the name of part marked as X?

Type Multiple Choice

Option Peda Incorrect
Option Return spring Incorrect
Option Wheel cylinder Incorrect
Option Master cylinder Correct
Solution
Marks 1 0

Question What is the name of valve?

Type Multiple Choice

Option Non return valve Incorrect
Option Flow control valve Incorrect
Option 4/2 normally open Incorrect

84
 85

Option Pressure relief valve Correct

Solution
Marks 1 0

Question What the function of brake valve in the pneumatic brake system?

Type Multiple Choice

Option Allow the air pressure to the system Correct
Option Release the air to the atmosphere Incorrect
Option Maintain air pressure in the tank Incorrect
Option Allow air pressure to pressure gauge Incorrect
Solution
Marks 1 0

Question What is the direction of rotation of driven gear meshing in the external
driving gear?
Type Multiple Choice
Option Same direction Incorrect
Option Inclined direction Incorrect
Option Opposite direction Correct
Option Perpendicular direction Incorrect
Solution
Marks 1 0

Question Which part in the internal gear pump act as seal?

Type Multiple Choice

Option Gears Incorrect
Option Gasket Incorrect
Option Sealing ring Incorrect
Option Crescent-shaped spacer Correct
Solution

85
 86

Marks 1 0

Question Which type of NDT method used ferrous particles is applied to the area
between the poles?
Type Multiple Choice
Option Ultra sonic testing Incorrect
Option Radiographic testing Incorrect
Option Liquid penetrate testing Incorrect
Option Electromagnetic yoke testing Correct
Solution
Marks 1 0

Question When did first car rolled out in the street of Calcutta?

Type Multiple Choice

Option 1810 Incorrect
Option 1887 Correct
Option 1910 Incorrect
Option 1950 Incorrect
Solution
Marks 1 0

Question Which year Hindustan motor established Ambassador car industry in

India?
Type Multiple Choice
Option 1900 Incorrect
Option 1920 Incorrect
Option 1940 Correct
Option 1980 Incorrect
Solution
Marks 1 0

86
 87

Question When did Maruti car launched in India?

Type Multiple Choice

Option 1920 Incorrect
Option 1940 Incorrect
Option 1983 Correct
Option 1990 Incorrect
Solution
Marks 1 0

Question What is indicating 2498 CC in vehicle specification?

Type Multiple Choice

Option Engine capacity Correct
Option Full tank capacity Incorrect
Option Single bore capacity Incorrect
Option Master cylinder capacity Incorrect
Solution
Marks 1 0

Question What is the term for 2 WD in vehicle specification?

Type Multiple Choice

Option Two wheel drive Correct
Option Four wheel drive Incorrect
Option Rear wheel drive Incorrect
Option Front wheel drive Incorrect
Solution
Marks 1 0

87
 88

Question Which increases the torque in the steering system?

Type Multiple Choice

Option Drop arm Incorrect
Option Gearbox Correct
Option Fluidplump Incorrect
Option Knuckle arm Incorrect
Solution
Marks 1 0

Question What is the information given by 6J x 15?

Type Multiple Choice

Option Rim size Correct
Option Tyre size Incorrect
Option Engine size Incorrect
Option Vehicle size Incorrect
Solution
Marks 1 0

Question Which is the digit indicate the engine type in the groups of VDC 17 digit of
VIN number?
Type Multiple Choice
Option 2 Incorrect
Option 3 Incorrect
Option 5 Incorrect
Option 8 Correct
Solution
Marks 1 0

Question What is indicate 12 - 17 digit in 17 digit VIN number?

88
 89

Type Multiple Choice

Option Body type Incorrect
Option Vehicle type Incorrect
Option Serial number Correct
Option Plant of product Incorrect
Solution
Marks 1 0

Question Which is the Ministry of India regulate the motor vehicle activities?

Type Multiple Choice

Option Ministry of finance Incorrect
Option Ministry of defence Incorrect
Option Ministry of rural and development Incorrect
Option Ministry of road transport and highways Correct
Solution
Marks 1 0

Question What is the name of part marked as ‘X’?

Type Multiple Choice

Option Belt Incorrect
Option Cock Incorrect
Option Motor Incorrect
Option Drain plug Correct
Solution
Marks 1 0

Question What is the name of equipment?

Type Multiple Choice

Option Jack stand Incorrect

89
 90

Option Hydraulic Jack Incorrect

Option Mechanical Jack Correct
Option Hydraulic car hoist Incorrect
Solution
Marks 1 0

Question What is the name of part marked as ‘X’?

Type Multiple Choice

Option Split pin Incorrect
Option Top plate Incorrect
Option Centre rod Incorrect
Option Revolving disc Correct
Solution
Marks 1 0

Question What is the name of the equipment?

Type Multiple Choice

Option Car hoist Incorrect
Option Engine hoist Correct
Option Hydraulic jack Incorrect
Option Hydraulic press Incorrect
Solution
Marks 1 0

Question What is the name of the equipment?

Type Multiple Choice

Option Car hoist Incorrect
Option Grease gun Incorrect
Option Hydraulic jack Incorrect

90
 91

Option Hydraulic jack Correct

Solution
Marks 1 0

Question Which type of vehicle capable of sensing its environment and navigating
without human input?
Type Multiple Choice
Option Diesel car Incorrect
Option Petrol car Incorrect
Option Electric car Incorrect
Option Driver less car Correct
Solution
Marks 1 0

Question Which type of service equipment used to hold the lifted vehicle for a long
period?
Type Multiple Choice
Option Hoist Correct
Option Jack stand Incorrect
Option Arbor press Incorrect
Option Hydraulic jack Incorrect
Solution
Marks 1 0

Question : Which type service equipment used in car service station to lift the car?

Type Multiple Choice

Option Arbor press Incorrect
Option Hydraulic jack Incorrect
Option Hydraulic hoist Correct
Option Hydraulic press Incorrect

91
 92

Solution
Marks 1 0

Question Which is used for quick inspection under the chassis of a car?

Type Multiple Choice

Option Stands Incorrect
Option Screw jack Incorrect
Option Trolley jack Correct
Option Two post hoist Incorrect
Solution
Marks 1 0

92