Scribd
Upload
162 views5 pages

MML Commands

This document provides instructions for configuring BTS in 6 steps: 1) Create D-Channel links for O&M and TRX, 2) Create BCF, 3) Create BTS, 4) Create TRX, 5) Default power control parameters, and 6) Default handover control parameters. It also provides useful BSC commands for checking status, configuration, alarms and more.

Uploaded by

sibi krishnan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
162 views5 pages

MML Commands

This document provides instructions for configuring BTS in 6 steps: 1) Create D-Channel links for O&M and TRX, 2) Create BCF, 3) Create BTS, 4) Create TRX, 5) Default power control parameters, and 6) Default handover control parameters. It also provides useful BSC commands for checking status, configuration, alarms and more.

Uploaded by

sibi krishnan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

BTS Configuration

1. Create and activate the D-Channel links for O&M and TRX

 Create O&M Link (Assume P202O is the O&M link ID)


#ZDSE:P202O:BCSU,1:62,1:64,36-31:;
 Activate BCSU
#ZDTC:P202O:WO;

 Create TRX Link (Assume P2021 is the TRX link ID)


#ZDSE:p2021:BCSU,1:0,1:64,36-30:;
 Activate TRX
#ZDTC:P2021:WO;

 Check the links status by executing below commands


#ZDSB:NAME=P202O;
#ZDSB:NAME=P2021;

2. Create BCF

 Assume that BCF number is 202, DNAME is as created in the O&M link:P202O)
#ZEFC:202,P:DNAME=P202O,::::;
 Check the status of the BCF
#ZEEI:BCF=202:;

3. Create BTS

 Assume BCF id is 202 and BCF Id is 202


#ZEQC:BCF=202,BTS=202,:CI=3299,BAND=1800:NCC=0,BCC=0:MCC=520,MN
C=18,LAC=26214:HOP=N,:GENA=Y,NSEI=1000,RAC=1,:;

NOTE: The following contents can be available in lab support database


CI, Band, MNC, MCC, LAC, NSEI, RAC

 Check the status of BTS


#ZEEI:BTS=202;

4. Create TRX

 Take the D-Channel name and BTS Id from step 1 to create TRX
#ZERC:BTS=202,TRX=1:PREF=P,:FREQ=544,TSC=0,PCMTSC=36-
1:DNAME=P2021:CH0=MBCCH,CH1=SDCCH,:;

NOTE: FREQ can be available in the lab support data, PCMTSL ET36 time slot 1

5. Default Power control parameters (Assume that BTS no. is 202)


#ZEUC:BTS=202:;

6. Default Handover control parameters (Assume that BTS no. is 202)


#ZEHC:BTS=202:;

Update the BTS software build


 Check the software build on 202 Id
#ZEWO:202;
 List the BTS software builds
#ZEWL;
 Attach the BTS software build to 202 Id
#ZEWA:202:NW:CX5_ULTRA:;
NOTE: CX5_ULTRA is one of the BTS software build
 Activate the software build to BTS
#ZEWV:202:NW:;

Useful commands

1. Check the software packages and active packages on the BSC


#ZWQO:CR;

2. Check the running packages on the BSC


#ZWQO:RUN;

3. To enable EGPRS on BTS (Before executing this command lock the BTS)
#ZEQV:BTS=202:EGENA=Y,;

4. Lock BTS (Assume BTS no. is 202)


#ZEQS:BTS=202:L:;

5. Modify D-Channel working status


#ZDTC:P2021:AD:;

6. Check the D-Channel signalling link status


ZDSB:NAME=P202%
NOTE:’%’ takes any single character

7. Delete O&M link (Delete all TRX, BTS, BCF before deleting the following link)
#ZDSD:P202O:;

8. Delete BTS (Assume that BTS no. is 202, Before executing this command lock the BTS)
#ZEQD:BTS=202::;

9. Delete BCF (Assume that BCF no.202, Before executing this command delete BTS)
#ZEEI:BCF=202::;

10. Unlock TRX (Assume that BTS no. is 202)


#ZERS:BTS=202,TRX=1,:U:;

11. Unlock BTS (Assume that BTS no. is 202)


#ZEQS:BTS=202:U:;

12. Adjust Power (Assume that BTS no. is 202)


#ZEUG:BTS=202:PMIN=30,PMAX=30:;

13. BSC Network information


#ZEEL;

14. List the status of UNITS


#ZDTI;
15. List the executed commands
#ZIGO;

16. Clearing the alarms for UNITS


#ZUST;

17. Creating DAP pool, this is needed if we are enabled EGPRS


#ZESE:ID=1,CRCT=36-25&&-29,BCSU=0,PCU=4:;
Attaching the DAP pool to TRX
ZERM:BTS=202,TRX=1:DAP=1,;

18. List O&M and Signalling D-Channel links for a particular ET number
#ZDTI:::PCM=37,:;

19. D-Channel telecom link set (Assume BTS id is 202)


#ZERO:BTS=202,TRX=1:;

20. List the units and computer identifier


#ZUSI:COMP;

21. Blocking SDCCH (BTS Id and TRX Id should be in hexadecimal number)


#ZOS:*,<computer_id>,1B4,,,,,5996,,,XW<bts_id>,<trx_id>,<tsl_id>,7

22. Deblock SDCCH


ZOS:*,<computer_id>,1B4,,,,,9500,,,XW<bts_id>,<trx_id>,<tsl_id>

23. Checking the SDCCH subchannel state information in the given TRXs
#ZDDS:;
#7 (NOTE: Define a character to be used for the extension)
#Z7T:<bts_id,trx_id>

24. Start FOXMEA service terminal extension


#ZDDS:;
#4 (NOTE: Define a character to be used for the extension)
#ZLE:4,FOX_BXSX
Useful BSC Commands

 General

ZAHO Alarms currently on


ZEOL BTS alarms
ZUSI Unit states

 A-Interface

ZNEL Signaling Link states


ZNET Route and link set states
ZNHI SCCP Subsystem states
ZRCI Circuits / Circuits Groups
ZDRI Synchronization
ZQWI Service channel configuration
ZNRI Signaling Point data
ZWGO Output Transcoder PCM information
ZWGF Fetch through connections from teanscoder

 Abis-Interface

ZEEI Radio Network Configuration states


ZEFO BCF state and parameters
ZEQO BTS states and parameters
ZERO TRX states and parameters
ZEOL BCF alarms currently on
ZDTI D-Channel states
ZRCI Circuits / Circuits Groups
ZDSB D-Channel parameters
ZRBI Semipermanent connections

 BCF SW

ZEWL Existing SW packages


ZEWO SW configuration of BCF
ZEWP Contents of SW packages

 BSC SW

ZWQO:CR SW packages and active packages


ZWQH SW package change history
1. Useful MSC Commands

 General

ZAHO Alarms currently on


ZUSI Unit states

 A-Interface

ZNEL Signaling Link states


ZNET Route and link set states
ZNHI SCCP Subsystem states
ZRCI Circuits / Circuits Groups
ZDRI Synchronization
ZNRI Signaling Point data

 Circuits and D-Channels

ZDTI D-Channel states


ZRCI Circuits / Circuits Groups
ZDSB D-Channel parameters

 MSC SW

ZWQO:CR SW packages and active package


ZWQH SW package charge history

 HLR

ZMI_ Home subscriber handling


ZMB_ Basic service handling

You might also like