Pneufit® C series

PUSH-IN fittings, metric

> Port size: Ø 4 ... 16 mm Releasable stainless

O/D tube, BSP threads steel grab-ring to grip
PA or PUR tube (85 or 95
> Norgren Pneufit® C
durometer).
fittings are ready to use,
offering fast assembly > Nickel plated brass
with no need for tools components provide
providing optimum flow. corrosion and
contamination resistance
> Pneufit® C offers a broad
and an extended life.
range of over 1,000
composite push-in > Pre applied thread
pneumatic fittings to sealant on all taper
complement our threads and recessed
established all brass captive O-ring on parallel
Pneufit® series. threads provides
optimum rapid sealing.
Technical features
Medium: Ambient/Media temperature: Warning: Materials:
Compressed air -20°C ... +60°C ( -4 ... 140°F) The Norgren Pneufit® C range Body: PBT
Operating pressure: Tube sizes: must not be used in vehicle air Seals: NBR (silicone free)
10 bar (145 psi) max. 4, 6, 8, 10, 12, 16 mm braking or ancillary systems. For u-packing and O-rings
Vacuum: Tubing types: push in fittings suitable for these Threaded bodies: nickel plated
750 mm of Hg PA 11 or 12 applications, please refer to the brass
Thread sizes: PUR 85, 95 or 98 durometer Fleetfit range. Release sleeve and backing ring:
M5, M6, 1/8, 1/4, 3/8 and 1/2 POM
ISO G, ISO Rc and ISO R Grab-ring: stainless steel
Collar: nickel plated brass
Thread sealant: chemitech G-
175L
Method of assembly

1. Ensure that the end of the tube 2. Push the tube through the collet 3. Continue pushing the tube 4. To disconnect push the tube into
is cut square and is free from into the fitting. through the ‘O’-ring until it the fitting, hold down the collet
burrs. bottoms on the tube stop and withdraw the tube.
then pull back.

Components

2
1
3 1 Impact resistant PBT body in black
2 Release buttons are red for metric, grey for inch
3 Stainless steel grab ring with special design to retain softer tube and provide easy releasability.
5
4 Silicon free U-packing provides leak tight tube seal under side loading.
4 5 Stem seal provides leak tight 360° swivel connection.
6 Nickel plated brass threads and notches on hex to signify NPT.
7 Pre-applied thread sealant on tapered threads and recessed captive O-ring on parallel threads.

6 7

Option selector C0˙˙˙˙˙˙˙

Thread type Thread size/tube size
Shape Thread size/tube size

Our policy is one of continued research and development. We therefore reserve the right to amend, 4/15
without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.01
 Pneufit® C series
PUSH-IN fittings, metric

Straight adaptors and connectors

Straight adaptor, Straight adaptor, Straight adaptor, Female adaptor, Straight union Straight union Stem reducer
BSPT thread BSPP thread metric or metric or C0020 (unequal) C0023
(external + internal (external + internal BSPT thread BSPP thread C0020
hex) hex) (internal hex only) C0226
C0125 C0225 C012A/C022A

Page 7 Page 7 Page 7 Page 7 Page 8 Page 8 Page 8

Stem expander Bulkhead union Straight adaptor, Stem union Stem union Plug Cap
(stem/tube) C0029 BSPP thread (equal) (unequal) C0004 (female plug)
C0023 (female bulkhead) C0022 C0022 C0012
C0232

Page 8 Page 8 Page 8 Page 8 Page 9 Page 9 Page 9

Elbow adaptors and connectors

Union elbow 90° Swivel elbow 90° Swivel elbow Stem elbow 90° Swivel elbow 90° Swivel elbow Bulkhead union
C0040 adaptor, BSPT adaptor, C0043 adaptor (extended), adaptor (female), elbow
thread BSPP thread metric or metric or C0049
C0147 C0247 BSPT thread BSPT thread
CO154/CO254 C0148/C0248

Page 9 Page 9 Page 9 Page 10 Page 10 Page 10 Page 10

Y and quadruple connectors

Union Y Swivel Y adaptor, Swivel Y adaptor, Stem Y Quadruple stem Quadruple Y Quadruple Y Quadruple re-
(equal + unequal) BSPT thread BSPP thread (equal + unequal) reducer union, union, ducer
C0082 C0188 C0288 C0084 C0096 BSPT thread BSPP thread C0097
C0195 C0295

Page 11 Page 11 Page 11 Page 11 Page 12 Page 12 Page 12 Page 12

Tee connectors and adaptors

Union tee Union tee Swivel tee adaptor, Swivel tee adaptor, Swivel side tee adaptor Stem tee
(equal) (unequal) BSPT thread BSPP thread (female), metric or (equal)
C0060 C006A C0167 C0267 BSPT thread C016C/ C0063
C026C

Page 12 Page 12 Page 13 Page 13 Page 13 Page 13

Stem tee Stem side tee Stem side tee Swivel side tee adaptor, Swivel side tee adaptor,
(unequal) (equal) (unequal) BSPT thread C0168 BSPP thread C0268
C0063 C0064 C0064

Page 13 Page 14 Page 14 Page 14 Page 14

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.02 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

Banjo flow controler

Banjo flow control (out), Banjo flow control (out), Banjo flow control Banjo flow control (in), Shrouded banjo (out), Shrouded banjo (out),
BSPT thread metric or BSPP thread (in), BSPT thread metric or BSPP thread BSPT thread metric or BSPP thread
C0TA0 COK51 COSAO COL51 COTBO COKBO

Page 20 Page 20 Page 21 Page 21 Page 21 Page 21

Swivel speed control Swivel speed control Speed control and pilot Speed control and pilot In-line flow control In-line flow control
(out), (out), check, check, COOGE C00GP
BSPT thread metric or BSPP thread metric or BSPT thread metric or BSPT thread
COT56 COK56 CO1GN CO2GN

Page 22 Page 22 Page 23 Page 23 Page 24 Page 24

Cross and manifolds

Union cross Manifold union Male manifold, BSPT Stem manifold
C0090 C00D3 thread C00J3
C01D3

Page 14 Page 15 Page 15 Page 15

Banjo, metric or BSPP Banjo (with top port), 2x Swivel elbow 2x Swivel elbow adap- 3x Swivel elbow adap- 3x Swivel elbow adap-
thread metric or BSPT thread adaptor, tor, tor, tor,
C0A51 COD51, COE51, COF51, BSPT thread BSPP thread BSPT thread BSPP thread
COG51 C0Q51 C0B51 COH51 C0C51

Page 15 Page 15 Page 16 Page 16 Page 16 Page 16

Single universal tee, Single universal tee, Double universal tee, Double universal tee, Triple universal tee, Triple universal tee,
BSPT thread BSPP thread BSPT thread BSPP thread BSPT thread BSPP thread
C0N71 C0A71 COQ71 C0B71 C0H71 COC71

Page 17 Page 17 Page 17 Page 17 Page 18 Page 18

Branch adaptor, Branch adaptor, metric Female branch adaptor, Female branch adaptor, Double branch adaptor, Double branch adaptor,
BSPT thread or BSPP thread BSPT thread metric or BSPP thread BSPT thread BSPP thread
CON70 COA70 C0*7K C0*7J C0Q70 C0B70

Page 18 Page 18 Page 19 Page 19 Page 19 Page 19

Triple branch adaptor, Triple branch adaptor,

BSPT thread BSPP thread
COH70 C0C70

Page 20 Page 20

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.03
 Pneufit® C series
PUSH-IN fittings, metric

In-line non-return valve

In-line non-return valve In-line non-return valve In-line non-return valve In-line non-return valve In-line non-return valve
C00GL (in), BSPT thread (in), metric or BSPP (out), BSPT thread (out), metric or BSPP
C01G2 thread C01G3 thread
C02G2 C02G3

Page 25 Page 25 Page 25 Page 25 Page 25

Self sealing adaptors

Straight adaptor, Straight adaptor, Straight union Swivel elbow, Swivel elbow,
BSPT thread BSPP thread C002J BSPT thread BSPP thread
C0124 C0224 CO14J C024J

Page 26 Page 26 Page 26 Page 26 Page 26

Hand valves
3/2 Shut-off valves, 3/2 Shut-off valves, 3/2 Shut-off valves, 3/2 Shut-off valves
BSPT thread CO1GG BSPT thread CO1GH BSPT thread CO1GJ CO1GF

Page 27 Page 27 Page 27 Page 27

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.04 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

Speed controllers flowrate for C0K51, C0TA0, Speed controllers flowrate for C00GE, C00GP
C0L51, C0K56, C0T56 and C0SA0 banjo types

3, 4 and 6 mm C00G*0400
M5
Control flow Free flow Control flow Free flow
160
Flow rate (l/m)

Flow rate (l/m)

Flow rate (l/m)

Flow rate (l/m)

8 125
Pressure (bar)

Pressure (bar)
140
120 7 150 8 100
100 7
80 5 100 5 75
3 60 3 50
40 50
1 20 1 25
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8
Needle turn Pressure (bar) Needle turn Pressure (bar)

4, 6 and 8 mm C00G*0600
1/8

Control flow Free flow Control flow Free flow

400 8
Flow rate (l/m)

Flow rate (l/m)

500 250
Flow rate (l/m)

Flow rate (l/m)

500
Pressure (bar)

Pressure (bar)
7 400 7
300 200 400
5 300 150 5 300
200 3
3 200 04-01 100 200
100 1 100 50 1 100

0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8
Needle turn Pressure (bar) Needle turn Pressure (bar)

4, 6, 8, 10 and 12 mm C00G*0800
1/4
Control flow Free flow Control flow Free flow
800 8
Flow rate (l/m)

Flow rate (l/m)

8
Flow rate (l/m)

Flow rate (l/m)

1000 1000
Pressure (bar)

Pressure (bar)

7 350 7
600 800 800
5 250 5
400 600 600
3
3 400 150 400
200 1 200 06-02, 04-02 1 200
50
0 1 2 3 4 5 6 7 8 9 10 1112 0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8
Needle turn Pressure (bar) Needle turn Pressure (bar)

6, 8, 10 and 12 mm C00G*1000
3/8
Control flow Free flow Control flow Free flow
Flow rate (l/m)

Flow rate (l/m)

Flow rate (l/m)

Flow rate (l/m)

8
Pressure (bar)

Pressure (bar)

1400 1400 700 8

7 7 800
1000 5 1000 500
5 600
800 3 600 300 3 400
600 1 200 1 200
100
0 1 3 5 7 9 11 13 15 0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8
Needle turn Pressure (bar) Needle turn Pressure (bar)

8, 10 and 12 mm1/2 C00G*1200

Control flow Free flow Control flow Free flow

2000
Flow rate (l/m)

Flow rate (l/m)

8
Flow rate (l/m)

Flow rate (l/m)

1000
Pressure (bar)

Pressure (bar)

7 8
Pressure (bar)

1500 2000 7 1000

5 1500 600
1000 5 750
3 1000 500
3
500 1 500 200 250
1

0 1 3 5 7 9 11 13 0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8
Needle turn Pressure (bar) Needle turn Pressure (bar)

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.05
 Pneufit® C series
PUSH-IN fittings, metric

Speed controllers flowrate for C01GN and C02GN banjo types

6 and 8 mm 8, 10 and 12 mm
1/8 3/8

Control flow Free flow Control flow Free flow

400 500 800 500
Flow rate (l/m)

Flow rate (l/m)

Flow rate (l/m)

Flow rate (l/m)

Pressure (bar)

Pressure (bar)
400 5
300 600 400
5 300 3 300
200 400
3 200 200
100 1 200 1
100 100
0 0 0 0
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8
Needle turn Pressure (bar) Needle turn Pressure (bar)

6 and 8 mm 10 and 12 mm
1/4 1/2

Control flow Free flow Control flow Free flow

Flow rate (l/m)

Flow rate (l/m)

400 500 500
Flow rate (l/m)

Flow rate (l/m)

1000
Pressure (bar)

Pressure (bar)
5 5
300 400 800 400
3 300 600 3 300
200
200 400 200
100 1 200 1
100 100
0 0 0 0
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 9 10 11 0 1 2 3 4 5 6 7 8
Needle turn Pressure (bar) Needle turn Pressure (bar)

T
øK
øA
øX

Technical data
ØA ØK T*1) ØX Thread Recommended torque Thread Recommended torque
4 10,5 15 9,5 M5 1,5 Nm
6 12,5 16,5 12 M6 2,3 Nm
8 14,5 18,5 14 G1/8 10 Nm R1/8 7 Nm
10 17,5 20 16,5 G1/4 15 Nm R1/4 12 Nm
12 20,5 23 19 G3/8 25 Nm R3/8 22 Nm
16 27 23,5 25 G1/2 40 Nm R1/2 28 Nm

*1) Dimensions here and in the individual tables refer to the collet being in the
‘IN’ position.

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.06 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

Dimensions in mm
Straight adaptor (external + internal hex) Female adaptor Projection/First angle
C0125 C0226 C
C G

øA
øA

B
B
G

ØA B C G 1 Model ØA B C G Model
4 R1/8 21,5 8 10 3 C01250418 4 M5 26 7 12 C02260405
4 R1/4 20,5 10 14 3 C01250428 4 G1/8 26,5 9 14 C02260418
4 R3/8 22 11 17 3 C01250438 4 G1/4 28,5 11 17 C02260428
6 R1/8 22 8 12 4 C01250618 4 G3/8 30 12 22 C02260438
6 R1/4 21 10 14 5 C01250628 6 G1/8 27,5 9 14 C02260618
6 R3/8 22 11 17 5 C01250638 6 G1/4 29,5 11 17 C02260628
6 R1/2 29,5 14 19 5 C01250648 6 G3/8 30 12 22 C02260638
8 R1/8 27,5 8 14 5 C01250818 8 G1/8 28,5 9 14 C02260818
8 R1/4 25,5 10 14 6 C01250828 8 G1/4 30,5 11 17 C02260828
8 R3/8 23 11 17 6 C01250838 8 G3/8 31,5 12 22 C02260838
8 R1/2 29,5 14 19 6 C01250848 8 G1/2 34,5 14 24 C02260848
10 R1/8 28,5 8 17 5 C01251018 10 G1/8 31,5 9 17 C02261018
10 R1/4 30,5 10 17 6 C01251028 10 G1/4 31,5 11 17 C02261028
10 R3/8 24,5 11 17 8 C01251038 10 G3/8 32,5 12 22 C02261038
10 R1/2 29,5 14 19 8 C01251048 10 G1/2 34,5 14 24 C02261048
12 R1/8 31,5 8 19 5 C01251218 12 G1/4 34,5 11 22 C02261228
12 R1/4 33 10 19 6 C01251228 12 G3/8 34,5 12 22 C02261238
12 R3/8 30 11 19 8 C01251238 12 G1/2 36,5 14 24 C02261248
12 R1/2 30 14 19 8 C01251248
16 R3/8 37,5 11 24 10 C01251638
16 R1/2 40,5 14 24 10 C01251648

Straight adaptor (external + internal hex) Straight adaptor (internal hex only)
C0225 C C012A, C022A
1

1
øA

øA
B

G G

ØA B C G 1 Model ØA B C G 1 Model
4 M5 22 4 10 - C02250405 4 M5 22 4,5 2 C022A0405
4 M6 22 8 10 - C02250406 4 M6 22 4 3 C022A0406
4 G1/8 21,5 6 13 3 C02250418 4 R1/8 20,5 8 3 C012A0418
4 G1/4 23,5 8 15 3 C02250428 4 R1/4 20,5 10 3 C012A0428
4 G3/8 22 8 17 3 C02250438 4 R3/8 20,5 11 3 C012A0438
6 M5 23,5 5 12 - C02250605 6 M5 22,5 5 2 C022A0605
6 M6 23 4 12 - C02250606 6 M6 22,5 4 3 C022A0606
6 G1/8 26,5 6 13 4 C02250618 6 R1/8 22 8 4 C012A0618
6 G1/4 24,5 8 15 5 C02250628 6 R1/4 22,5 10 4 C012A0628
6 G3/8 25,5 8 17 5 C02250638 6 R3/8 22,5 11 4 C012A0638
8 G1/8 26,5 6 15 5 C02250818 8 R1/8 27 8 5 C012A0818
8 G1/4 26,5 8 15 6 C02250828 8 R1/4 25 10 6 C012A0828
8 G3/8 25 8 17 6 C02250838 8 R3/8 25 11 6 C012A0838
8 G1/2 26 9 21 6 C02250848 8 R1/2 25 14 6 C012A0848
10 G1/8 29,5 6 17 5 C02251018 10 R1/8 28 8 5 C012A1018
10 G1/4 30 8 17 8 C02251028 10 R1/4 29 10 6 C012A1028
10 G3/8 27 8 17 8 C02251038 10 R3/8 29 11 8 C012A1038
10 G1/2 28,5 9 21 8 C02251048 10 R1/2 29 14 8 C012A1048
12 G1/4 32 8 19 8 C02251228 12 R1/8 35 8 5 C012A1218
12 G3/8 31,5 8 19 8 C02251238 12 R1/4 32,5 10 6 C012A1228
12 G1/2 31,5 9 21 8 C02251248 12 R3/8 32,5 11 8 C012A1238
16 G3/8 36,5 8 24 8 C02251638 12 R1/2 32,5 14 8 C012A1248
16 G1/2 36,5 9 24 10 C02251648

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.07
 Pneufit® C series
PUSH-IN fittings, metric

Dimensions in mm
Straight union Straight union (unequal) Projection/First angle
C0020 C0020

C C

ø A1
øD

øA
øA

H
O

ØA C ØD H O Model ØA Ø A1 C Model
4 34,5 3,3 4,5 10,5 C00200400 6 4 36,5 C00200604
6 37 3,3 5,5 12,5 C00200600 8 4 38,5 C00200804
8 39,5 4,3 7 14,5 C00200800 8 6 37,5 C00200806
10 43 4,3 8 17,5 C00201000 10 6 40 C00201006
12 48 4,3 9,5 20,5 C00201200 10 8 41 C00201008
16 51 - - - C00201600* 12 8 46 C00201208
*No nail hole in 16 mm 12 10 44 C00201210
16 12 49,5 C00201612
Stem reducer
C0023
Stem union (equal)
ø A1
øA

C0022

øA
F
C
C

ØA Ø A1 C F Model
6 4 41 21,5 C00230604 ØA C Model
8 4 42 22,5 C00230804 4 37 C00220400
8 6 44,5 23,5 C00230806 6 38 C00220600
10 6 47,5 26,5 C00231006 8 41 C00220800
10 8 49,5 27,5 C00231008 10 44 C00221000
12 6 52 29,5 C00231206 12 49 C00221200
12 8 52,5 30,5 C00231208 16 53 C00221600
12 10 56,5 31 C00231210
16 12 57,5 33 C00231612
Straight adaptor (female bulkhead)
1
Stem expander (stem/tube) C0232
C0023
øA1

øA
B1
øA

B
F P G
C C

ØA Ø A1 C F Model
4 6 41 24 C00230406 ØA B B1 C G P 1 Model
6 8 44 26,5 C00230608 4 G1/8 M12x1 26,5 9 4 14 14 C02320418
4 G1/4 M12x1 29 11 4 14 17 C02320428
4 G3/8 M12x1 30 12 4 14 22 C02320438
Bulkhead union C
6 G1/8 M14x1 28,5 9 4 17 17 C02320618
C0029
6 G1/4 M14x1 30,5 11 4 17 17 C02320628
6 G3/8 M14x1 31,5 12 4 17 22 C02320638
8 G1/8 M16x1 29,5 9 5 19 19 C02320818
øA
B

8 G1/4 M16x1 31,5 11 5 19 19 C02320828

8 G3/8 M16x1 32,5 12 5 19 22 C02320838
P 10 G1/4 M20x1 32,5 11 5 24 24 C02321028
O 10 G3/8 M20x1 33,5 12 5 24 24 C02321038
10 G1/2 M20x1 36 14 5 24 24 C02321048
ØA B C O P Model 12 G1/4 M22x1 38 11 5 26 24 C02321228
4 M12x1 35,5 24,5 4 14 C00290400 12 G3/8 M22x1 38 12 5 26 24 C02321238
6 M14x1 40 27,5 4 17 C00290600 12 G1/2 M22x1 40 14 5 26 24 C02321248
8 M16x1 42 29,5 5 19 C00290800
10 M20x1 45 31,5 5 24 C00291000
12 M22x1 50,5 36 5 26 C00291200

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.08 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

Dimensions in mm
Stem union (unequal) Plug
Projection/First angle
C0022 C0004

øA1
ø A1

øA
F F

øA
C C

ØA Ø A1 C F Model ØA Ø A1 C F Model
4 6 38 18 C00220604 4 4 30 17,5 C00040400
6 8 41,5 20,5 C00220806 6 6 34 18,5 C00040600
8 10 43,5 21,5 C00221008 8 8 38 21 C00040800
10 12 46,5 22,5 C00221210 10 10 42 24 C00041000
12 16 52 25 C00221612 12 12 46 29,5 C00041200
16 16 50 30 C00041600

Union elbow E
Cap (female plug)
C
C0040 øD C0012
øA

ø A1
H

øA
O

ØA ØD E H O Model ØA Ø A1 C Model
4 3,3 19 8,5 10,5 C00400400 4 10,5 18 C00120400
6 3,3 21 7,5 12,5 C00400600 6 12,5 19 C00120600
8 4,3 22,5 9 14,5 C00400800 8 14,5 21 C00120800
10 4,3 26 12 18 C00401000 10 17,5 23 C00121000
12 4,3 30 13,5 21 C00401200 12 19,5 25 C00121200
16 4,3 34 16 25,5 C00401600 16 24 25 C00121600

90° Swivel elbow adaptor E 90° Swivel elbow adaptor E

C0147 C0247
øA
øA

C
G
G

B B

ØA B C E G Model ØA B C E G Model
4 R1/8 24,5 18,5 8 10 C01470418 4 M5 22 18,5 4,5 10 C02470405
4 R1/4 26,5 18,5 10 14 C01470428 4 M6 22 18,5 4,5 10 C02470406
4 R3/8 27,5 18,5 11 17 C01470438 4 G1/8 22,5 18,5 6 14 C02470418
6 R1/8 26,5 20,5 8 12 C01470618 4 G1/4 24,5 18,5 8 17 C02470428
6 R1/4 29,5 20,5 10 14 C01470628 4 G3/8 24,5 18,5 8 20 C02470438
6 R3/8 30,5 20,5 11 17 C01470638 6 M5 24 20,5 4,5 12 C02470605
6 R1/2 33,5 20,5 14 21 C01470648 6 M6 24 20,5 4,5 12 C02470606
8 R1/8 28 23 8 14 C01470818 6 G1/8 24,5 20,5 6 14 C02470618
8 R1/4 31 23 10 14 C01470828 6 G1/4 26,5 20,5 8 17 C02470628
8 R3/8 32 23 11 17 C01470838 6 G3/8 26,5 20,5 9 20 C02470638
8 R1/2 35 23 14 21 C01470848 8 G1/8 26 23 8 14 C02470818
10 R1/8 28,5 23,5 8 17 C01471018 8 G1/4 28 23 8 17 C02470828
10 R1/4 31,5 23,5 10 17 C01471028 8 G3/8 28 23 9 20 C02470838
10 R3/8 32,5 23,5 11 17 C01471038 8 G1/2 29 23 10 24 C02470848
10 R1/2 35,5 23,5 14 21 C01471048 10 G1/8 26,5 23,5 6 17 C02471018
12 R1/8 32,5 27,5 8 19 C01471218 10 G1/4 28,5 23,5 8 17 C02471028
12 R1/4 34,5 27,5 10 19 C01471228 10 G3/8 28,5 23,5 9 20 C02471038
12 R3/8 35,5 27,5 11 19 C01471238 10 G1/2 29,5 23,5 10 24 C02471048
12 R1/2 38,5 27,5 14 21 C01471248 12 G1/4 32,5 27,5 8 19 C02471228
16 R3/8 43 32,5 11 24 C01471638 12 G3/8 32,5 27,5 9 20 C02471238
16 R1/2 46 32,5 14 24 C01471648 12 G1/2 32,5 27,5 10 24 C02471248
16 G3/8 41 32,5 9 24 C02471638
16 G1/2 42 32,5 10 24 C02471648

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.09
 Pneufit® C series
PUSH-IN fittings, metric

Dimensions in mm
Stem elbow 90° Swivel elbow adaptor (female) Projection/First angle
C0043 E C0148/C0248 E

øA

øA

C
C

G
øA1 B

ØA Ø A1 C E F Model ØA B C E G Model
4 4 28,5 19 22 C00430400 4 M5 21,5 18,5 4,5 10 C02480405
6 6 31,5 20,5 24 C00430600 4 M6 21,5 18,5 4,5 10 C02480406
8 8 34,5 23 26 C00430800 4 R1/8 22,5 18,5 9 14 C01480418
10 10 38 24 28 C00431000 4 R1/4 24,5 18,5 11 17 C01480428
12 12 41 28 30 C00431200 6 M5 23,5 20,5 4,5 12 C02480605
16 16 48,5 32 35 C00431600 6 M6 23,5 20,5 4,5 12 C02480606
6 R1/8 24,5 20,5 9 14 C01480618
6 R1/4 26,5 20,5 11 17 C01480628
90° Swivel elbow adaptor (extended)
6 R3/8 27,5 20,5 12 21 C01480638
C0154/C0254 E
8 R1/8 26 23 9 14 C01480818
8 R1/4 28 23 11 17 C01480828
øA

8 R3/8 29 23 12 22 C01480838
10 R1/4 28,5 23,5 11 17 C01481028
10 R3/8 29,5 23,5 12 22 C01481038
C

10 R1/2 31,5 23,5 14 24 C01481048

12 R1/4 31,5 27,5 11 19 C01481228
12 R3/8 32,5 27,5 12 22 C01481238
G

12 R1/2 34,5 27,5 14 24 C01481248

B

ØA B C E G Model Bulkhead union elbow E

4 M5 33,5 18,5 4,6 10 C02540405 C0049
4 M6 33 18,5 4,6 10 C02540406
øA

4 R1/8 35,5 18,5 8 10 C01540418

4 R1/4 37,5 18,5 10 14 C01540428
4 R3/8 38,5 18,5 11 17 C01540438

C
6 M5 38 20,5 4,5 12 C02540605
P
G
6 M6 37,5 20,5 4,5 12 C02540606
6 R1/8 40 20,5 8 12 C01540618
F

6 R1/4 42 20,5 10 14 C01540628

øA
6 R3/8 43 20,5 11 17 C01540638
B
6 R1/2 46 20,5 14 21 C01540648
8 R1/8 44 23 8 14 C01540818
ØA B C E F G P Model
8 R1/4 46 23 10 14 C01540828
8 R3/8 47 23 11 17 C01540838 4 M12x1 32,5 18,5 5,5 9 4 14 C00490400

8 R1/2 50 23 14 21 C01540848 6 M14x1 38 20,5 6 11 4 17 C00490600

10 R1/8 47,5 23,5 8 17 C01541018 8 M16x1 40,5 23 6,5 11,5 5 19 C00490800

10 R1/4 49,5 23,5 10 17 C01541028 10 M20x1 42,5 23,5 7 12 5 24 C00491000

10 R3/8 50,5 23,5 11 17 C01541038 12 M22x1 48 27,5 7,5 15 5 26 C00491200

10 R1/2 53,5 23,5 14 21 C01541048

12 R1/8 54 27,5 8 19 C01541218
12 R1/4 56 27,5 10 19 C01541228
12 R3/8 57 27,5 11 19 C01541238
12 R1/2 60 27,5 14 21 C01541248
16 R3/8 69 32,5 11 24 C01541638
16 R1/2 72 32,5 14 24 C01541648

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.10 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

Union Y Dimensions in mm
Swivel Y adaptor
Projection/First angle
C0082 C0288

øA
øA

ø A1
L

B
L
G
D C
H
C
O

Equal
ØA Ø A1 C D H L O Model ØA B C G L Model
4 4 37 3,3 14,5 10,5 10,5 C00820400 4 M5 35 4,5 10,5 10 C02880405
6 6 40 3,3 16,5 12,5 12,5 C00820600 4 M6 35 4,5 10,5 10 C02880406
8 8 43 4,3 18,5 14,5 14,5 C00820800 4 G1/8 41 6 10,5 14 C02880418
10 10 47,5 4,3 19 17,5 17,5 C00821000 4 G1/4 43 8 10,5 17 C02880428
12 12 53 4,3 22 20,5 20,5 C00821200 4 G3/8 43 8 10,5 20 C02880438
6 M5 41,5 4,5 12,5 12 C02880605
6 M6 41,5 4,5 12,5 12 C02880606
Unequal
6 G1/8 42,5 6 12,5 14 C02880618
ØA Ø A1 C D H L O Model
6 G1/4 44,5 8 12,5 17 C02880628
4 6 38 3,3 15 10,5 10,5 C00820604
6 G3/8 45,5 9 12,5 20 C02880638
4 8 39,5 3,3 15 10,5 15 C00820804
6 G1/2 46,5 10 12,5 24 C02880648
6 8 41 4,3 16 12,5 13 C00820806
8 G1/8 43,5 6 14,5 14 C02880818
6 10 43 3,3 16,5 13 17,5 C00821006
8 10 43 4,3 17 14,5 15 C00821008 8 G1/4 45,5 8 14,5 17 C02880828
8 12 48 3,3 17,5 15 21 C00821208 8 G3/8 46,5 9 14,5 20 C02880838
10 12 46,5 4,3 18,5 17,5 18 C00821210 8 G1/2 47,5 10 14,5 24 C02880848
10 G1/8 49,5 6 17,5 17 C02881018
10 G1/4 51,5 8 17,5 17 C02881028
Swivel Y adaptor 10 G3/8 52,5 9 17,5 20 C02881038
C0188 10 G1/2 53,5 10 17,5 24 C02881048
12 G1/4 55 8 20,5 19 C02881228
øA

12 G3/8 56 9 20,5 20 C02881238

L

12 G1/2 57 10 20,5 24 C02881248

G
C
Stem Y
ØA B C G L Model
C0084
øA

4 R1/8 41,5 8 10,5 10 C01880418 ø A1

L

4 R1/4 42,5 10 10,5 14 C01880428

4 R3/8 43,5 11 10,5 17 C01880438 F
6 R1/8 44 8 12,5 12 C01880618 C
6 R1/4 47 10 12,5 14 C01880628
6 R3/8 48 11 12,5 17 C01880638
Equal
6 R1/2 51 14 12,5 21 C01880648
ØA Ø A1 C F L Model
8 R1/8 45,5 8 14,5 14 C01880818
4 4 49,5 22 10,5 C00840400
8 R1/4 48,5 10 14,5 14 C01880828
6 6 54,5 24 12,5 C00840600
8 R3/8 48,5 11 14,5 17 C01880838
8 8 60 26 14,5 C00840800
8 R1/2 52,5 14 14,5 21 C01880848 10 10 66 28 17,5 C00841000
10 R1/8 49 8 17,5 17 C01881018 12 12 71,5 30 20,5 C00841200
10 R1/4 52 10 17,5 17 C01881028
10 R3/8 53 11 17,5 17 C01881038 Unequal
10 R1/2 56,2 14 17,5 21 C01881048 ØA Ø A1 C F L Model
12 R1/8 52,5 3 20,5 19 C01881218 4 6 51,5 24 10,5 C00840604
12 R1/4 54,5 8 20,5 19 C01881228 6 8 56,5 26 12,5 C00840806
12 R3/8 55,5 11 20,5 19 C01881238 8 10 62 28 14,5 C00841008
12 R1/2 58,5 14 20,5 22 C01881248 10 12 68 30 17,5 C00841210

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.11
 Pneufit® C series
PUSH-IN fittings, metric

Dimensions in mm
Quadruple stem reducer Quadruple Y union
Projection/First angle
C0096 C0295

øA

ø A1
L

øA
L

B
D
H
C D G
H
C
O

ØA B C ØD G H L O* Model
4 G1/8 46 3,3 5 14 10,5 21 14 C02950418
ØA Ø A1 C ØD H L O Model 4 G1/4 49 3,3 6,5 14 10,5 21 17 C02950428
4 6 37 3,3 14 10,5 21 C00960604 6 G1/8 49 3,3 6,5 15,5 12,5 25,5 14 C02950618
6 8 40,5 3,3 15,5 12,5 25,5 C00960806 6 G1/4 52 3,3 8 15,5 12,5 25,5 17 C02950628
* see drawing C0096 series

Quadruple Y union Quadruple reducer

C0195 C0097

øA
øA

ø A1
B

L
L

D G D F
H H
C C

ØA B C ØD G H L O Model ØA Ø A1 C ØD F H L O* Model
4 R1/8 44 3,3 8 14 10,5 21 12 C01950418 4 6 43,5 3,3 17 14 12,5 21 C00970604
4 R1/4 48 3,3 10 14 10,5 21 14 C01950428 6 8 48 3,3 19 15,5 14,5 25,5 C00970806
6 R1/8 48 3,3 8 15,5 12,5 25,5 14 C01950618 * see drawing C0096 series
6 R1/4 51 3,3 10 15,5 12,5 25,5 14 C01950628
* see drawing C0096 series

Union T (equal) Union T (unequal)

C0060 C006A
C C
øD
øD

øA
øA

H
H

C1
C1

G
G

O O

øA ø A1
E E

ØA C C1 ØD E G H O Model ØA Ø A1 C C1 ØD E G H O Model
4 36,5 19 3,3 13 12,5 8,5 10,5 C00600400 6 4 41,5 19 3,3 14 12,5 8 12,5 C006A0604
6 42 21,5 3,3 15 13,5 7,5 12,5 C00600600 8 6 45 22 4,3 17 13,5 9,5 15 C006A0806
8 45 23,5 4,3 18 15 9 14,5 C00600800 10 6 49 23 4,3 17 13,5 11 17,5 C006A1006
10 48 25,5 4,3 20 15,5 11 17,5 C00601000 10 8 49 25 4,3 19 15 11 17,5 C006A1008
12 57 29,5 4,3 26 16,5 12,5 20,5 C00601200 12 8 56 25,5 4,3 19 15 12,5 20,5 C006A1208
16 68 34,5 4,3 32 18 16 25,5 C00601600 12 10 56 27,5 4,3 22 15,5 12,5 20,5 C006A1210
16 10 61 30,5 4,3 23 15,5 16 25,5 C006A1610
16 12 63,5 33 4,3 26 16,5 16 25,5 C006A1612

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.12 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

Swivel tee adaptor Dimensions in mm

Swivel tee adaptor
Projection/First angle
C0167 C0267
C C

øA

øA
E
E

G
G
B
B

ØA B C E G Model ØA B C E G Model
4 R1/8 37,5 24,5 8 10 C01670418 4 M5 37,5 22 4,5 10 C02670405
4 R1/4 37,5 26,5 10 14 C01670428 4 M6 37,5 22 4,5 10 C02670406
4 R3/8 37,5 27,5 11 17 C01670438 4 G1/8 37,5 22 6 14 C02670418
6 R1/8 41 26,5 8 12 C01670618 4 G1/4 37,5 24 8 17 C02670428
6 R1/4 41 29,5 10 14 C01670628 4 G3/8 37,5 24 8 20 C02670438
6 R3/8 41 30,5 11 17 C01670638 6 M5 41 24 4,5 12 C02670605
6 R1/2 41 33,5 14 21 C01670648 6 M6 41 24 4,5 12 C02670606
8 R1/8 44 28 8 14 C01670818 6 G1/8 41 24,5 6 14 C02670618
8 R1/4 44 31 10 14 C01670828 6 G1/4 41 26,5 8 17 C02670628
8 R3/8 44 32 11 17 C01670838 6 G3/8 41 27,5 9 20 C02670638
8 R1/2 44 35 14 21 C01670848 6 G1/2 41 28,5 9 24 C02670648
10 R1/8 47 28,5 8 17 C01671018 8 G1/8 44,5 26 6 14 C02670818
10 R1/4 47 32 10 17 C01671028 8 G1/4 44,5 28 8 17 C02670828
10 R3/8 47 32,5 11 17 C01671038 8 G3/8 44,5 29 9 20 C02670838
10 R1/2 47 35,5 14 21 C01671048 8 G1/2 44,5 30 10 24 C02670848
12 R1/8 55 32,5 8 19 C01671218 10 G1/8 47 26,5 6 17 C02671018
12 R1/4 55 34,5 10 19 C01671228 10 G1/4 47 28,5 8 17 C02671028
12 R3/8 55 35,5 11 19 C01671238 10 G3/8 47 29,5 9 20 C02671038
12 R1/2 55 38,5 14 21 C01671248 10 G1/2 47 30,5 10 24 C02671048
16 R3/8 64,5 43 11 24 C01671638 12 G1/4 55 31,5 8 19 C02671228
16 R1/2 64,5 46 14 24 C01671648 12 G3/8 55 32,5 9 20 C02671238
12 G1/2 55 33,5 10 24 C02671248
C
Swivel tee adaptor (female) 16 G3/8 64,5 40 9 24 C02671638
C016C/C026C 16 G1/2 64,5 41 10 24 C02671648
øA

Stem tee øA
C0063
E
G

ØA B C E G Model
C

4 M5 37,5 17 8 10 C026C0405
øA1

4 M6 37,5 17 8 10 C026C0406
4 R1/8 38 17 9 14 C016C0418 F
4 R1/4 38 17 11 17 C016C0428 E
6 M5 41 17,5 8 12 C026C0605 Equal
6 M6 41 17,5 8 12 C026C0606
ØA Ø A1 C E F Model
6 R1/8 41 17,5 9 14 C016C0618
4 4 37,5 32,5 24 C00630400
6 R1/4 41 17,5 11 17 C016C0628
6 6 41 34,5 25 C00630600
6 R3/8 41 17,5 12 22 C016C0638
8 8 44,5 36 26 C00630800
8 R1/8 44,5 18,5 9 14 C016C0818
10 10 47 37,5 28 C00631000
8 R1/4 44,5 18,5 11 17 C016C0828
12 12 55 39 30 C00631200
8 R3/8 44,5 18,5 12 22 C016C0838
8 R1/2 44,5 18,5 14 24 C016C0848 Unequal
10 R1/8 47 19,5 9 17 C016C1018 ØA Ø A1 C E F Model
10 R1/4 47 19,5 11 17 C016C1028 4 6 37,5 33,5 25 C00630604
10 R3/8 47 19,5 12 22 C016C1038 6 8 41 35,5 28 C00630806
10 R1/2 47 19,5 14 24 C016C1048 8 10 44,5 38,5 28 C00631008
12 R1/4 55 22 11 19 C016C1228 10 12 47 39,5 30 C00631210
12 R3/8 55 22 12 22 C016C1238
12 R1/2 55 22 14 24 C016C1248

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.13
 Pneufit® C series
PUSH-IN fittings, metric

Dimensions in mm
Stem side tee Swivel side tee adaptor Projection/First angle
C0064 C0268 E
øA
E

øA

C
øA

G
F
B

øA1

Equal
ØA Ø A1 C E F Model ØA B C E G Model
4 4 58 20,5 17 C00640400 4 M5 42 20 4,5 10 C02680405
6 6 52,5 21,5 17,5 C00640600 4 M6 42 20 4,5 10 C02680406
8 8 67 23,5 18,5 C00640800 4 G1/8 43 20 6 14 C02680418
10 10 73 25,5 19,5 C00641000 4 G1/4 45 20 8 17 C02680428
12 12 82 30 22 C00641200 4 G3/8 45 20 8 20 C02680438
6 M5 46 21,5 4,5 12 C02680605
Unequal 6 M6 46 21,5 4,5 12 C02680606
ØA Ø A1 C E F Model 6 G1/8 47 21,5 6 14 C02680618
4 6 59 20 17 C00640604 6 G1/4 49 21,5 8 17 C02680628
6 8 63,5 21,5 17,5 C00640806 6 G3/8 50 21,5 9 20 C02680638
8 10 69,5 23,5 18,5 C00641008 8 G1/8 50 23,5 6 14 C02680818
10 12 75 25,5 19,5 C00641210 8 G1/4 52 23,5 8 17 C02680828
8 G3/8 56 23,5 9 20 C02680838
8 G1/2 54 23,5 10 24 C02680848
Swivel side tee adaptor E 10 G1/8 54 25,5 6 17 C02681018
C0168 10 G1/4 56 25,5 8 17 C02681028
10 G3/8 57 25,5 9 20 C02681038
10 G1/2 58 25,5 10 24 C02681048
12 G1/4 62 30 8 19 C02681228
øA

12 G3/8 63 30 9 20 C02681238
12 G1/2 64 30 10 24 C02681248
G

B Union cross
C0090 C

ØA B C E G Model
4 R1/8 45 20 8 10 C01680418
4 R1/4 48 20 10 14 C01680428
C1
øA

4 R3/8 49 20 11 17 C01680438
6 R1/8 48,5 21,5 8 12 C01680618
6 R1/4 51 21,5 10 14 C01680628
6 R3/8 52 21,5 11 17 C01680638
6 R1/2 55 21,5 14 21 C01680648 E
8 R1/8 52 23,5 8 14 C01680818
8 R1/4 55 23,5 10 14 C01680828
øD

8 R3/8 56 23,5 11 17 C01680838

H

8 R1/2 59 23,5 14 21 C01680848

10 R1/8 55,5 25,5 8 17 C01681018
10 R1/4 58,5 25,5 10 17 C01681028 O

10 R3/8 59,5 25,5 11 17 C01681038

ØA C C1 ØD E H O Model
10 R1/2 62,5 25,5 14 21 C01681048
4 36,5 38 3,3 13 6,5 10,5 C00900400
12 R1/8 63 30 8 19 C01681218
6 42 42,5 4,3 15 7,5 12,5 C00900600
12 R1/4 65 30 10 19 C01681228
8 45 47 4,3 18 9 14,5 C00900800
12 R3/8 66 30 11 19 C01681238
12 R1/2 69 30 14 21 C01681248 10 48 50,5 4,3 20 10 17,5 C00901000
12 55 57 4,3 24 12 20,5 C00901200

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.14 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

Dimensions in mm
Manifold union Banjo
Projection/First angle
C00D3 C C0A51
C

C1

øA
C1
øA L

E
E

G
ø A1
B
H

øD
O
ØA B C C1 E G Model
4 M5 25 18 10 3,5 8 C0A510405
ØA Ø A1 C C1 D E H L O Model 4 G1/8 30,5 25 14,5 11 8 C0A510418
4 6 63,5 18 3,3 34 7,5 10,5 12,5 C00D30604 4 G1/4 34,5 29 16,5 10 8 C0A510428
4 8 65,5 21,5 4,3 35 9 10,5 14,5 C00D30804 6 M5 18 28 11 3,5 8 C0A510605
6 8 71,5 22,5 4,3 41 9,5 12,5 14,5 C00D30806 6 G1/8 31 25 14,5 8 8 C0A510618
6 G1/4 35 29 16,5 10 12 C0A510628
6 10 78 23,5 4,3 42 9,5 12,5 17,5 C00D31006
6 G3/8 38,5 32,5 20,5 11 14 C0A510638
8 10 83,5 26 4,3 47 9,5 14,5 17,5 C00D31008
8 G1/8 33 25 13,5 8 8 C0A510818
8 G1/4 37 29 16 10 12 C0A510828
Male manifold 8 G3/8 40 32,5 20,5 11 14 C0A510838
C
C01D3 G
8 G1/2 46 39,5 23 14 17 C0A510848
øA1

10 G1/4 39 29 15,5 10 12 C0A511028

10 G3/8 42 32,5 19,5 11 14 C0A511038
10 G1/2 47,5 39,5 23 14 17 C0A511048
B

12 G3/8 46 32,5 18,5 11 14 C0A511238

C1

12 G1/2 50 39,5 21,5 14 17 C0A511248

øA L
E Banjo (with top port)
C0D51/C0E51/C0F51/C0G51 C

ØA Ø A1 B C C1 E G L Model B1

4 6 R1/8 72 24 34 8 10,5 12 C01D30418 G1

4 8 R1/8 74 28,5 35 8 10,5 14 C01D30428
6 8 R1/4 82,5 34 41 10 12,5 14 C01D30628
8 10 R3/8 95 34,5 47 10 14,5 17 C01D30838
C1

øA
E

Stem manifold
G

C00J3 B
C
F
ØA B & B1 C C1 E G G1 Model
øA

4 M5 25 20 10 3,5 6 8 C0D510405
ø A2

4 R1/8 30,5 30 14,5 9 8 14 C0E510418

4 R1/4 34,5 35,5 18 11 10 17 C0F510428
C1

6 M5 28 20 11 3,5 6 8 C0D510605

ø A1 L 6 R1/8 31 30 14,5 9 8 14 C0E510618

E
6 R1/4 35 35,5 18 11 10 17 C0F510628
6 R3/8 38,5 41 21 12 11 21 C0G510638
8 R1/8 33 30 15,5 9 8 14 C0E510818
ØA Ø A1 Ø A2 C C1 E F L Model 8 R1/4 38 35,5 19 11 10 17 C0F510828
4 6 6 84,5 24 34 25 10,5 C00J30604 8 R3/8 40 41 21 12 11 21 C0G510838
4 8 8 89,5 28,5 35 28,5 10,5 C00J30804 10 R1/4 39 35,5 20 11 10 17 C0F511028
6 8 8 95,5 34 41 28,5 12,5 C00J30806 10 R3/8 42 41 22,5 12 11 21 C0G511038
8 10 10 109,5 34,5 47 31 14,5 C00J31008 12 R3/8 46 41 23 12 11 21 C0G511238

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.15
 Pneufit® C series
PUSH-IN fittings, metric

2x Swivel elbow adaptor 3x Swivel elbow adaptor Dimensions in mm

Projection/First angle
C0Q51 C C0H51 C
H J H J
G G

B
B

E
E
øA
øA

ØA B C E G H J Model ØA B C E G H J Model
4 R1/8 52 24 8 22,5 18 14 C0Q510418 4 R1/8 70 24 8 22,5 18 14 C0H510418
4 R1/4 63 26 10 27,5 22 17 C0Q510428 4 R1/4 85 26 10 27,5 22 17 C0H510428
4 R3/8 65 28 11 29 22 21 C0Q510438 4 R3/8 87 28 11 29 22 21 C0H510438
4 R1/2 74 30 14 34 24 24 C0Q510448 4 R1/2 97,5 30 14 34 24 24 C0H510448
6 R1/8 52 25 8 22,5 18 14 C0Q510618 6 R1/8 70 25 8 22,5 18 14 C0H510618
6 R1/4 63 27 10 27,5 22 17 C0Q510628 6 R1/4 85 27 10 27,5 22 17 C0H510628
6 R3/8 65 28,5 11 29 22 21 C0Q510638 6 R3/8 87 28,5 11 29 22 21 C0H510638
6 R1/2 74 30 14 34 24 24 C0Q510648 6 R1/2 97,5 30 14 34 24 24 C0H510648
8 R1/8 52 27 8 22,5 18 14 C0Q510818 8 R1/8 70 27 8 22,5 18 14 C0H510818
8 R1/4 63 28,5 10 27,5 22 17 C0Q510828 8 R1/4 85 28,5 10 27,5 22 17 C0H510828
8 R3/8 65 30,5 11 29 22 21 C0Q510838 8 R3/8 87 30,5 11 29 22 21 C0H510838
8 R1/2 74 32 14 34 24 24 C0Q510848 8 R1/2 97,5 32 14 34 24 24 C0H510848
10 R1/8 52 28,5 8 22,5 18 14 C0Q511018 10 R1/8 70 28,5 8 22,5 18 14 C0H511018
10 R1/4 63 30,5 10 27,5 22 17 C0Q511028 10 R1/4 85 30,5 10 27,5 22 17 C0H511028
10 R3/8 65 32,5 11 29 22 21 C0Q511038 10 R3/8 87 32,5 11 29 22 21 C0H511038
10 R1/2 74 34,5 14 34 24 24 C0Q511048 10 R1/2 97,5 34,5 14 34 24 24 C0H511048
12 R1/4 63 36 10 27,5 22 17 C0Q511228 12 R1/4 85 36 10 27,5 22 17 C0H511228
12 R3/8 65 36 11 29 22 21 C0Q511238 12 R3/8 87 36 11 29 22 21 C0H511238
12 R1/2 74 38 14 34 24 24 C0Q511248 12 R1/2 87,5 38 14 34 24 24 C0H511248

2x Swivel elbow adaptor 3x Swivel elbow adaptor

C
C0B51 C0C51 C
H J H J
G
G
B

B
E

øA øA

ØA B C E G H J Model ØA B C E G H J Model
4 G1/8 50 24 5 20,5 18 14 C0B510418 4 G1/8 68 24 5 20,5 18 14 C0C510418
4 G1/4 61 26 6,5 25,5 22 17 C0B510428 4 G1/4 83 26 6,5 25,5 22 17 C0C510428
4 G3/8 62 28 6,5 26 22 21 C0B510438 4 G3/8 84 28 6,5 26 22 21 C0C510438
4 G1/2 70 30 8 29,5 24 24 C0B510448 4 G1/2 93 30 8 29,5 24 24 C0C510448
6 G1/8 50 25 5 20,5 18 14 C0B510618 6 G1/8 68 25 5 20,5 18 14 C0C510618
6 G1/4 61 27 6,5 25,5 22 17 C0B510628 6 G1/4 83 27 6,5 25,5 22 17 C0C510628
6 G3/8 62 28,5 6,5 26 22 21 C0B510638 6 G3/8 84 28,5 6,5 26 22 21 C0C510638
6 G1/2 70 30 8 29,5 24 24 C0B510648 6 G1/2 93 30 8 29,5 24 24 C0C510648
8 G1/8 50 27 5 20,5 18 14 C0B510818 8 G1/8 68 27 5 20,5 18 14 C0C510818
8 G1/4 61 28,5 6,5 25,5 22 17 C0B510828 8 G1/4 83 28,5 6,5 25,5 22 17 C0C510828
8 G3/8 62 30,5 6,5 26 22 21 C0B510838 8 G3/8 84 30,5 6,5 26 22 21 C0C510838
8 G1/2 70 32 8 29,5 24 24 C0B510848 8 G1/2 93 32 8 29,5 24 24 C0C510848
10 G1/8 50 28,5 5 20,5 18 14 C0B511018 10 G1/8 68 28,5 5 20,5 18 14 C0C511018
10 G1/4 61 30,5 6,5 25,5 22 17 C0B511028 10 G1/4 83 30,5 6,5 25,5 22 17 C0C511028
10 G3/8 62 32,5 6,5 26 22 21 C0B511038 10 G3/8 84 32,5 6,5 26 22 21 C0C511038
10 G1/2 70 34,5 8 29,5 24 24 C0B511048 10 G1/2 83 34,5 8 29,5 24 24 C0C511048
12 G1/4 61 36 6,5 25,5 22 17 C0B511228 12 G1/4 83 34 6,5 25,5 22 17 C0C511228
12 G3/8 62 36 6,5 26 22 21 C0B511238 12 G3/8 84 35 6,5 26 22 21 C0C511238
12 G1/2 70 38 8 29,5 24 24 C0B511248 12 G1/2 93 38 8 29,5 24 24 C0C511248

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.16 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

Single universal tee Dimensions in mm

Single universal tee Projection/First angle
C0N71 C0A71
C C

øA
øA

E
E

H
H

G
G
B
B

ØA B C E G H Model ØA B C E G H Model
4 R1/8 47 34 8 25,5 14 C0N710418 4 G1/8 47 32 5 20,5 14 C0A710418
4 R1/4 50,5 41 10 27,5 17 C0N710428 4 G1/4 50,5 39 6,5 25,5 17 C0A710428
4 R3/8 54,5 43 11 29 21 C0N710438 4 G3/8 54,5 40 6,5 26 21 C0A710438
4 R1/2 58,5 50 14 34 24 C0N710448 4 G1/2 58,5 45,5 8 29,5 24 C0A710448
6 R1/8 48,5 34 8 22,5 14 C0N710618 6 G1/8 48,5 32 5 20,5 14 C0A710618
6 R1/4 52 41 10 27,5 17 C0N710628 6 G1/4 52 39 6,5 25,5 17 C0A710628
6 R3/8 56 43 11 29 21 C0N710638 6 G3/8 56 40 6,5 26 21 C0A710638
6 R1/2 58,5 50 14 34 24 C0N710648 6 G1/2 58,5 45,5 8 29,5 24 C0A710648
8 R1/8 52 34 8 22,5 14 C0N710818 8 G1/8 52 32 5 20,5 14 C0A710818
8 R1/4 55,5 41 10 27,5 17 C0N710828 8 G1/4 55,5 39 6,5 25,5 17 C0A710828
8 R3/8 59,5 43 11 29 21 C0N710838 8 G3/8 59,5 40 6,5 26 21 C0A710838
8 R1/2 63,5 50 14 34 24 C0N710848 8 G1/2 62,5 45,5 8 29,5 24 C0A710848
10 R1/8 56 34 8 22,5 14 C0N711018 10 G1/8 56 32 5 20,5 14 C0A711018
10 R1/4 59,5 41 10 27,5 17 C0N711028 10 G1/4 59,5 39 6,5 25,5 17 C0A711028
10 R3/8 63,5 43 11 29 21 C0N711038 10 G3/8 63,5 40 6,5 26 21 C0A711038
10 R1/2 67 50 14 34 24 C0N711048 10 G1/2 67 45,5 8 29,5 24 C0A711048
12 R1/4 66 41 10 27,5 17 C0N711228 12 G1/4 66 39 6,5 25,5 17 C0A711228
12 R3/8 70 43 11 29 21 C0N711238 12 G3/8 70 40 6,5 26 21 C0A711238
12 R1/2 74,5 50 14 34 24 C0N711248 12 G 1/2 74,5 45,5 8 29,5 24 C0A711248

C
Double universal tee Double universal tee C
H J H J
C0Q71 C0B71

G G

E
E

B
B

øA øA

ØA B C E G H J Model ØA B C E G H J Model
4 R1/8 52 47 8 22,5 18 14 C0Q710418 4 G1/8 50 47 5 20,5 18 14 C0B710418
4 R1/4 63 50,5 10 27,5 22 17 C0Q710428 4 G1/4 61 50,5 6,5 25,5 22 17 C0B710428
4 R3/8 65 54,5 11 29 22 21 C0Q710438 4 G3/8 62 54,5 6,5 26 22 21 C0B710438
4 R1/2 74 58,5 14 34 24 24 C0Q710448 4 G1/2 69,5 58,5 8 29,5 24 24 C0B710448
6 R1/8 52 48,5 8 22,5 18 14 C0Q710618 6 G1/8 50 48,5 5 20,5 18 14 C0B710618
6 R1/4 63 52 10 27,5 22 17 C0Q710628 6 G1/4 61 52 6,5 25,5 22 17 C0B710628
6 R3/8 65 56 11 29 22 21 C0Q710638 6 G3/8 62 56 6,5 26 22 21 C0B710638
6 R1/2 74 58,5 14 34 24 24 C0Q710648 6 G1/2 69,5 58,5 8 29,5 24 24 C0B710648
8 R1/8 52 52 8 22,5 18 14 C0Q710818 8 G1/8 50 52 5 20,5 18 14 C0B710818
8 R1/4 63 55,5 10 27,5 22 17 C0Q710828 8 G1/4 61 55,5 6,5 25,5 22 17 C0B710828
8 R3/8 65 59,5 11 29 22 21 C0Q710838 8 G3/8 62 59,5 6,5 26 22 21 C0B710838
8 R1/2 74 62,5 14 34 24 24 C0Q710848 8 G1/2 69,5 62,5 8 29,5 24 24 C0B710848
10 R1/8 52 56 8 22,5 18 14 C0Q711018 10 G1/8 50 56 5 20,5 18 14 C0B711018
10 R1/4 63 59,5 10 27,5 22 17 C0Q711028 10 G1/4 61 59,5 6,5 25,5 22 17 C0B711028
10 R3/8 65 63,5 11 29 22 21 C0Q711038 10 G3/8 62 63,5 6,6 26 22 21 C0B711038
10 R1/2 74 67 14 34 24 24 C0Q711048 10 G1/2 69,5 67 8 29,5 24 24 C0B711048
12 R1/4 63 66 10 27,5 21 17 C0Q711228 12 G1/4 61 66 6,5 25,5 21 17 C0B711228
12 R3/8 65 70 11 29 21 21 C0Q711238 12 G3/8 62 70 6,5 26 21 21 C0B711238
12 R1/2 74 74,5 14 34 24 24 C0Q711248 12 G 1/2 69,5 74,5 8 29,5 24 24 C0B711248

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.17
 Pneufit® C series
PUSH-IN fittings, metric

Dimensions in mm
Branch adaptor Branch adaptor
Projection/First angle
C0N70 C0A70

E E

øA

øA
C
C

H
H
G

G
B B

L
L
ØA B C E G H L Model ØA B C E G H L Model
6 R1/8 25 23 8 14,5 12,5 11 C0N700618 4 M5 18 19,5 3,6 10 10,5 8 C0A700405
8 R1/4 29 28,5 10 18,5 15 15 C0N700828 6 G1/8 23,5 23 4,5 14 12,5 8 C0A700618
10 R1/4 29 31 10 19,5 17,5 15 C0N701028 8 G1/4 28 28,5 6 17,5 15 12 C0A700828
10 R3/8 32,5 31 11 20,5 17,5 19 C0N701038 10 G1/4 28 31 6 19 17,5 12 C0A701028
12 R3/8 32,5 36 11 22 20,5 19 C0N701238 10 G3/8 32,5 31 6 21 17,5 14 C0A701038
12 R1/2 39,5 36,5 14 25,5 20,5 24 C0N701248 12 G3/8 32,5 36 6 22,5 20,5 14 C0A701238
12 G1/2 34 36,5 7,5 23 20,5 17 C0A701248

Triple universal tee Triple universal tee

C0H71 C
C0C71 C
H J H J

G G
E
B

E
B

øA øA

ØA B C E G H J Model ØA B C E G H J Model
4 R1/8 70 47 8 22,5 18 14 C0H710418 4 G1/8 68 47 5 20,5 18 14 C0C710418
4 R1/4 85 50,5 10 27,5 22 17 C0H710428 4 G1/4 83 50,5 6,5 25,5 22 17 C0C710428
4 R3/8 87 54,5 11 29 22 21 C0H710438 4 G3/8 84 54,5 6,5 26 22 21 C0C710438
4 R1/2 97,5 58,5 14 34 24 24 C0H710448 4 G1/2 93 58,5 8 29,5 24 24 C0C710448
6 R1/8 70 48,5 8 22,5 18 14 C0H710618 6 G1/8 68 48,5 5 20,5 18 14 C0C710618
6 R1/4 85 52 10 27,5 22 17 C0H710628 6 G1/4 83 52 6,5 25,5 22 17 C0C710628
6 R3/8 87 56 11 29 22 21 C0H710638 6 G3/8 84 56 6,5 26 22 21 C0C710638
6 R1/2 97,5 58,5 14 34 24 24 C0H710648 6 G1/2 93 58,5 8 29,5 24 24 C0C710648
8 R1/8 70 52 8 22,5 18 14 C0H710818 8 G1/8 68 52 5 20,5 18 14 C0C710818
8 R1/4 85 55,5 10 27,5 22 17 C0H710828 8 G1/4 83 55,5 6,5 25,5 22 17 C0C710828
8 R3/8 87 59,5 11 29 22 21 C0H710838 8 G3/8 84 59,5 6,5 26 22 21 C0C710838
8 R1/2 97,5 62,5 14 34 24 24 C0H710848 8 G1/2 93 62,5 8 29,5 24 24 C0C710848
10 R1/8 70 56 8 22,5 18 14 C0H711018 10 G1/8 68 56 5 20,5 18 14 C0C711018
10 R1/4 85 59,5 10 27,5 22 17 C0H711028 10 G1/4 83 59,5 6,5 25,5 22 17 C0C711028
10 R3/8 87 63,5 11 29 22 21 C0H711038 10 G3/8 84 63,5 6,6 26 22 21 C0C711038
10 R1/2 97,5 67 14 34 24 24 C0H711048 10 G1/2 93 67 8 29,5 24 24 C0C711048
12 R1/4 85 66 10 27,5 21 17 C0H711228 12 G1/4 83 66 6,5 25,5 21 17 C0C711228
12 R3/8 87 70 11 29 21 21 C0H711238 12 G3/8 84 70 6,5 26 21 21 C0C711238
12 R1/2 97,5 74,5 14 34 24 24 C0H711248 12 G 1/2 93 74,5 8 29,5 24 24 C0C711248

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.18 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

Branch adaptor (female) Dimensions in mm

Branch adaptor (female)
Projection/First angle
C0*7J C0*7K
E E
B B

G1

G1
øA

øA
C

C
H

H
G

G
B B

L
ØA B C E G / G1 H L Model ØA B C E G / G1 H L Model
6 R1/8 30 23 8 14,5 12,5 14 C0E7J0618 4 M5 20 19,5 3,5 / 7 10 10,5 8 C0D7K0405
8 R1/4 35,5 28,5 10 18,5 15 17 C0F7J0828 6 G1/8 30 23 8 14 12,5 14 C0E7K0618
10 R1/4 35,5 31 10 19,5 17,5 17 C0F7J1028 8 G1/4 35,5 27 10 17,5 14,5 17 C0F7K0828
10 R3/8 41 31 11 20,5 17,5 21 C0G7J1038 10 G1/4 35,5 28 10 17,5 17,5 17 C0F7K1028
12 R3/8 41 36 11 22 20,5 21 C0G7J1238 10 G3/8 41 30 11 17,5 17,5 21 C0G7K1038
12 R1/2 50 36,5 14 25,5 20,5 24 C0H7J1248 12 G3/8 41 33 11 17,5 20,5 21 C0G7K1238
12 G1/2 50 35 14 20 20,5 24 C0H7K1248

Double branch adaptor

C
C0Q70 Double branch adaptor
H J
C0B70 C
G
H J
G
B

B
E

E
øA
øA

ØA B C E G H J Model ØA B C E G H J Model
4 R1/8 52 24 8 22,5 18 14 C0Q700418 4 G1/8 50 24 5 20,5 18 14 C0B700418
4 R1/4 63 26 10 27,5 22 17 C0Q700428 4 G1/4 61 26 6,5 25,5 22 17 C0B700428
4 R3/8 65 28 11 29 22 21 C0Q700438 4 G3/8 62 28 6,5 26 22 21 C0B700438
4 R1/2 74 30,5 14 34 24 24 C0Q700448 4 G1/2 69,5 30,5 8 29,5 24 24 C0B700448
6 R1/8 52 25 8 22,5 18 14 C0Q700618 6 G1/8 50 25 5 20,5 18 14 C0B700618
6 R1/4 63 27 10 27,5 22 17 C0Q700628 6 G1/4 61 27 6,5 25,5 22 17 C0B700628
6 R3/8 65 28,5 11 29 22 21 C0Q700638 6 G3/8 62 28,5 6,5 26 22 21 C0B700638
6 R1/2 74 31 14 34 24 24 C0Q700648 6 G1/2 69,5 31 8 29,5 24 24 C0B700648
8 R1/8 52 27 8 22,5 18 14 C0Q700818 8 G1/8 50 27 5 20,5 18 14 C0B700818
8 R1/4 63 30,5 10 27,5 22 17 C0Q700828 8 G1/4 61 30,5 6,5 25,5 22 17 C0B700828
8 R3/8 65 30,5 11 29 22 21 C0Q700838 8 G3/8 62 30,5 6,5 26 22 21 C0B700838
8 R1/2 74 32,5 14 34 24 24 C0Q700848 8 G1/2 69,5 32,5 8 29,5 24 24 C0B700848
10 R1/8 52 28,5 8 22,5 18 14 C0Q701018 10 G1/8 50 28,5 5 20,5 18 14 C0B701018
10 R1/4 63 30,5 10 27,5 22 17 C0Q701028 10 G1/4 61 30,5 6,5 25,5 22 17 C0B701028
10 R3/8 65 32,5 11 29 22 21 C0Q701038 10 G3/8 62 32,5 6,5 26 22 21 C0B701038
10 R1/2 74 35 14 34 24 24 C0Q701048 10 G1/2 69,5 35 8 29,5 24 24 C0B701048
12 R1/4 63 34 10 27,5 22 17 C0Q701228 12 G1/4 61 34 6,5 25,5 22 17 C0B701228
12 R3/8 65 35 11 29 22 21 C0Q701238 12 G3/8 62 35 6,5 26 22 21 C0B701238
12 R1/2 74 39 14 34 24 24 C0Q701248 12 G 1/2 69,5 39 8 29,5 24 24 C0B701248

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.19
 Pneufit® C series
PUSH-IN fittings, metric

Banjo flow control (out) Banjo flow control (out) Dimensions in mm

Projection/First angle
C0TA0 C0K51
C C

C1

C1

øA
øA
2 2
E

E
1
G

G
1 2 1 2
B B

ØA B C > C1 < C1 E G Model ØA B C > C1 < C1 E G Model

4 R1/8 30,5 35 40 14,5 8 11 C0TA00418 3 M5 21,5 27 30 9,5 3,5 8 C0K510305
4 R1/4 34,5 40 45,5 18 10 15 C0TA00428 4 M5 25 27 30 10 3,5 8 C0K510405
6 R1/8 31 35 31 14,5 8 11 C0TA00618 4 G1/8 30,5 35 40 15 6 8 C0K510418
6 R1/4 35 40 45,5 18 10 15 C0TA00628 4 G1/4 34,5 40 45,5 17 8 12 C0K510428
6 R3/8 38,5 46,5 55 21 11 19 C0TA00638 6 M5 28 27 30 11 3,5 8 C0K510605
8 R1/8 33 35 40 15,5 8 11 C0TA00818 6 G1/8 31 35 40 15 6 8 C0K510618
8 R1/4 37 40 45,5 19 10 15 C0TA00828 6 G1/4 35 40 45,5 17 8 12 C0K510628
8 R3/8 40 46,5 55 21 11 19 C0TA00838 6 G3/8 38,5 46,5 55 21 8 14 C0K510638
8 R1/2 46 53 60 25 14 24 C0TA00848 8 G1/8 33 35 40 14 6 8 C0K510818
10 R1/4 39 40 45,5 20 10 15 C0TA01028 8 G1/4 37 40 45,5 16 8 12 C0K510828
10 R3/8 42 46,5 55 22,5 11 19 C0TA01038 8 G3/8 40 46,5 55 21 8 14 C0K510838
10 R1/2 47,5 53 60 25 14 24 C0TA01048 8 G1/2 46 53 60 22,5 9 17 C0K510848
12 R1/4 41 40 45,5 22 10 15 C0TA01228 10 G1/4 39 40 45,5 18 8 12 C0K511028
12 R3/8 46 46,5 55 23 11 19 C0TA01238 10 G3/8 42 46,5 55 19,5 8 14 C0K511038
12 R1/2 50 53 60 27 14 24 C0TA01248 10 G1/2 47,5 53 60 22,5 9 17 C0K511048
12 G1/4 41 40 45,5 20 8 12 C0K511228
12 G3/8 46 46,5 55 19 8 14 C0K511238
12 G1/2 50 53 60 21 9 17 C0K511248

Triple branch adaptor C

Triple branch adaptor
C
C0H70 H J
C0C70
H J
G G
B
B

E
E

øA øA

ØA B C E G H J Model ØA B C E G H J Model
4 R1/8 52 24 8 22,5 18 14 C0H700418 4 G1/8 68 24 5 20,5 18 14 C0C700418
4 R1/4 63 26 10 27,5 22 17 C0H700428 4 G1/4 83 26 6,5 25,5 22 17 C0C700428
4 R3/8 65 28 11 29 22 21 C0H700438 4 G3/8 84 28 6,5 26 22 21 C0C700438
4 R1/2 74 30,5 14 34 24 24 C0H700448 4 G1/2 93 30,5 8 29,5 24 24 C0C700448
6 R1/8 52 25 8 22,5 18 14 C0H700618 6 G1/8 68 25 5 20,5 18 14 C0C700618
6 R1/4 63 27 10 27,5 22 17 C0H700628 6 G1/4 83 27 6,5 25,5 22 17 C0C700628
6 R3/8 65 28,5 11 29 22 21 C0H700638 6 G3/8 84 28,5 6,5 26 22 21 C0C700638
6 R1/2 74 31 14 34 24 24 C0H700648 6 G1/2 93 31 8 29,5 24 24 C0C700648
8 R1/8 52 27 8 22,5 18 14 C0H700818 8 G1/8 68 27 5 20,5 18 14 C0C700818
8 R1/4 63 30,5 10 27,5 22 17 C0H700828 8 G1/4 83 30,5 6,5 25,5 22 17 C0C700828
8 R3/8 65 30,5 11 29 22 21 C0H700838 8 G3/8 84 30,5 6,5 26 22 21 C0C700838
8 R1/2 74 32,5 14 34 24 24 C0H700848 8 G1/2 93 32,5 8 29,5 24 24 C0C700848
10 R1/8 52 28,5 8 22,5 18 14 C0H701018 10 G1/8 68 28,5 5 20,5 18 14 C0C701018
10 R1/4 63 30,5 10 27,5 22 17 C0H701028 10 G1/4 83 30,5 6,5 25,5 22 17 C0C701028
10 R3/8 65 32,5 11 29 22 21 C0H701038 10 G3/8 84 32,5 6,5 26 22 21 C0C701038
10 R1/2 74 35 14 34 24 24 C0H701048 10 G1/2 93 35 8 29,5 24 24 C0C701048
12 R1/4 63 34 10 27,5 22 17 C0H701228 12 G1/4 83 34 6,5 25,5 22 17 C0C701228
12 R3/8 65 35 11 29 22 21 C0H701238 12 G3/8 84 35 6,5 26 22 21 C0C701238
12 R1/2 74 39 14 34 24 24 C0H701248 12 G 1/2 93 39 8 29,5 24 24 C0C701248

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.20 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

Banjo flow control (in) Dimensions in mm

Shrouded banjo (out)
Projection/First angle
C0SA0 C0TB0 C

C1

øA
2

E
1

G
1 2 1 2
B

ØA B C C1 min. C1 max.E G Model ØA B C C1 E G Model

4 R1/8 30,5 35 40 14,5 8 11 C0SA00418 4 R1/8 30,5 31,5 15 8 11 C0TB00418
4 R1/4 34,5 40 45,5 18 10 15 C0SA00428 4 R1/4 34,5 37 18,5 10 15 C0TB00428
6 R1/8 31 35 40 14,5 8 11 C0SA00618 6 R1/8 31 31,5 15 8 11 C0TB00618
6 R1/4 35 40 45,5 18 10 15 C0SA00628 6 R1/4 35 37 18,5 10 15 C0TB00628
6 R3/8 39 46,5 55 21 11 19 C0SA00638 6 R3/8 38,5 43,5 22 11 19 C0TB00638
8 R1/8 33 35 40 15,5 8 11 C0SA00818 8 R1/8 33 31,5 16,5 8 11 C0TB00818
8 R1/4 37 40 45,5 19 10 15 C0SA00828 8 R1/4 37 37 19,5 10 15 C0TB00828
8 R3/8 40 46,5 55 21 11 19 C0SA00838 8 R3/8 40 43,5 22 11 19 C0TB00838
8 R1/2 46 53 60 25 14 24 C0SA00848 8 R1/2 46 50 26,5 14 24 C0TB00848
10 R1/4 39 40 45,5 20 10 15 C0SA01028 10 R1/4 39 37 21 10 15 C0TB01028
10 R3/8 42 46,5 55 22,5 11 19 C0SA01038 10 R3/8 42 43,5 23,5 11 19 C0TB01038
10 R1/2 47,5 53 60 25 14 24 C0SA01048 10 R1/2 47,5 50 26,5 14 24 C0TB01048
12 R1/4 41 40 45,5 22 10 15 C0SA01228 12 R1/4 41 37 22,5 10 15 C0TB01228
12 R3/8 46 46,5 55 23 11 19 C0SA01238 12 R3/8 46 43,5 24 11 19 C0TB01238
12 R1/2 50 53 60 27 14 24 C0SA01248 12 R1/2 50 50 28 14 24 C0TB01248

Banjo flow control (in) Shrouded banjo (out)

C0L51 C0KB0 C
C
C1
C1

øA

øA
2
E

1 1
G
G

B B
1 2 1 2

ØA B C > C1 < C1 E G Model ØA B C C1 E G Model

3 M5 21,5 27 30 9,5 3,5 8 C0L510305 4 M5 25 23 10,5 3,5 8 C0KB00405
4 M5 25 27 30 10 3,5 8 C0L510405 4 G1/8 30,5 31,5 15 6 8 C0KB00418
4 G1/8 30,5 35 40 15 6 8 C0L510418 4 G1/4 34,5 37 17,5 8 12 C0KB00428
4 G1/4 34,5 40 45,5 17 8 12 C0L510428 6 M5 28 23 11,5 3,5 8 C0KB00605
6 M5 28 27 30 11 3,5 8 C0L510605 6 G1/8 31 31,5 15 6 8 C0KB00618
6 G1/8 31 35 40 15 6 8 C0L510618 6 G1/4 35 37 17,5 8 12 C0KB00628
6 G1/4 35 40 45,5 17 8 12 C0L510628 6 G3/8 38,5 43,5 21 8 14 C0KB00638
6 G3/8 39 46,5 55 21 8 14 C0L510638 8 G1/8 33 31,5 14 6 8 C0KB00818
8 G1/8 33 35 40 14 6 8 C0L510818 8 G1/4 37 37 17 8 12 C0KB00828
8 G1/4 37 40 45,5 16 8 12 C0L510828 8 G3/8 40 43,5 21 8 14 C0KB00838
8 G3/8 40 46,5 55 21 8 14 C0L510838 8 G1/2 46 50 23 9 17 C0KB00848
8 G1/2 46 53 60 22,5 9 17 C0L510848 10 G1/4 39 37 19 8 12 C0KB01028
10 G1/4 39 40 45,5 18 8 12 C0L511028 10 G3/8 42 43,5 20 8 14 C0KB01038
10 G3/8 42 46,5 55 19,5 8 14 C0L511038 10 G1/2 47,5 50 23 9 17 C0KB01048
10 G1/2 47,5 53 60 22,5 9 17 C0L511048 12 G1/4 41 37 20,5 8 12 C0KB01228
12 G1/4 41 40 45,5 20 8 12 C0L511228 12 G3/8 46 43,5 19 8 14 C0KB01238
12 G3/8 46 46,5 55 19 8 14 C0L511238 12 G1/2 50 50 21,5 9 17 C0KB01248
12 G1/2 50 53 60 21 9 17 C0L511248

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.21
 Pneufit® C series
PUSH-IN fittings, metric

Dimensions in mm
Swivel speed control (out) Swivel speed control (out) Projection/First angle
C0T56 C0K56

øA øA
E E

2 2

C1
C1
1 2 1 2

C
C

H
H

1 1
G

G
B B
360°
360°

ØA B C*1) C1 E G H Model ØA B C*1) C1 E G H Model

4 R1/8 35/40 20,5 14,5 8 15 11 C0T560418 4 M5 27/30 20,5 12,5 3,6 9,5 8 C0K560405
4 R1/4 4045,5 20,5 18 10 18,5 15 C0T560428 4 G1/8 35/40 20,5 14,5 8 15,5 8 C0K560418
6 R1/8 35/40 24 15,5 8 15 11 C0T560618 4 G1/4 40/45,5 20,5 18 12 17,5 12 C0K560428
6 R1/4 40/45,5 26 20,5 10 18,5 15 C0T560628 6 M5 27/30 22,5 13,5 3,6 9,5 8 C0K560605
6 R3/8 47/55 26 23,5 11 21,5 19 C0T560638 6 G1/8 35/40 24 15,5 8 15,5 8 C0K560618
8 R1/8 35/40 25,5 16 8 15,5 11 C0T560818 6 G1/4 40/45,5 26 20,5 12 17,5 12 C0K560628
8 R1/4 40/45,5 29 19,5 10 18,5 15 C0T560828 6 G3/8 47/55 26 23,5 14 21,5 14 C0K560638
8 R3/8 47/55 30 24,5 11 22 19 C0T560838 8 G1/8 35/40 25,5 16 8 14,5 8 C0K560818
8 R1/2 53/60 30 26,5 14 26 24 C0T560848 8 G1/4 40/45,5 29 19,5 12 17,5 12 C0K560828
10 R1/4 40/45,5 31 20,5 10 18,5 15 C0T561028 8 G3/8 47/55 30 24,5 14 21 14 C0K560838
10 R3/8 47/55 32 24,5 11 22 19 C0T561038 8 G1/2 53/60 30 26,5 17 23 17 C0K560848
10 R1/2 53/60 33 26,5 14 26,5 24 C0T561048 10 G1/4 40/45,5 31 20,5 12 17,5 12 C0K561028
12 R1/4 40/45,5 33,5 22 10 18,5 15 C0T561228 10 G3/8 47/55 32 24,5 14 21 14 C0K561038
12 R3/8 47/55 34,5 24,5 11 22 19 C0T561238 10 G1/2 53/60 33 26,5 17 23 17 C0K561048
12 R1/2 53/60 36 26,5 14 26,5 24 C0T561248 12 G1/4 40/45,5 33,5 22 12 17,5 12 C0K561228
* min/max 12 G3/8 47/55 34,5 24,5 14 21 14 C0K561238
12 G1/2 53/60 36 26,5 17 23 17 C0K561248
* min/max

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.22 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

Dimensions in mm
Speed control and pilot check E
360° Projection/First angle
C01GN øK
E1
øA
B1

C1

G1
1

C3
C2
2

C
12

H
øL

G
1

øE2 B
Note: E3
Pilot check is not suitable for extreme high cycling applications.

ØA B B1 C C1 C2*1) C3 E E1 Ø E2 E3 G G1 H ØK ØL 1 Model
6 R1/8 M5 41 24 50,6/55,4 12,9 14,2 14,3 15 24,2 16 8,5 16 12,5 12 12 10 C01GN0618
6 R1/4 R1/8 49,1 25,9 57,1/61,9 15,6 19,3 18,7 18,8 30,1 11 10 19 13 15,3 17 13 C01GN0628
8 R1/8 M5 41 24,9 50,6/55,4 12,6 15,4 14,3 15 24,2 8,5 8,5 16 14,8 12 12 10 C01GN0818
8 R1/4 R1/8 49,1 28,3 57,1/61,9 15,9 18,3 18,7 18,8 30,1 11 10 19 14,8 15,3 17 13 C01GN0828
8 R3/8 R1/8 56,9 29,3 67,2/72,2 19,1 23,3 22,8 23 37,1 12 10 22,5 15 20,2 19 17 C01GN0838
10 R3/8 R1/8 56,9 31,7 67,2/72,2 19,1 23,3 22,8 23 37,1 12 10 22,5 17,5 20,2 19 17 C01GN1038
10 R1/2 R1/4 70,8 33,1 81,3/87 25,6 26,3 29,1 28,7 47,4 15 13,5 28 17,5 27,2 24 23 C01GN1048
12 R3/8 R1/8 56,9 34,4 67,2/72,2 19,1 23,3 22,8 23 37,1 12 10 22,5 20,5 20,2 19 17 C01GN1238
12 R1/2 R1/4 70,8 35,8 81,3/87 25,6 26,3 29,1 28,7 47,4 15 13,5 28 20,5 27,2 24 23 C01GN1248
*1) min./max. control flow see page 5

Speed control and pilot check E

360°
C02GN øK
E1
øA
B1
C1

G1

1
C3
C2

2
H

12 øL
G

1
øE2 B
E3
Note:
Pilot check is not suitable for extreme high cycling applications.

ØA B B1 C C1 C2*1) C3 E E1 Ø E2 E3 G G1 H ØK ØL 1 Model
6 G1/8 M5 41 24 50,6/55,4 12,9 14,2 14,3 15 24,2 5 8,5 16 12,5 12 12 10 C02GN0618
6 G1/4 G1/8 49,1 25,9 57,1/61,9 15,6 19,3 18,7 18,8 30,1 6,5 9,5 19 13 15,3 17 13 C02GN0628
8 G1/8 M5 41 24,9 50,6/55,4 12,6 15,4 14,3 15 24,2 5 8,5 16 14,8 12 12 10 C02GN0818
8 G1/4 G1/8 49,1 28,3 57,1/61,9 15,9 18,3 18,7 18,8 30,1 6,5 9,5 19 14,8 15,3 17 13 C02GN0828
8 G3/8 G1/8 56,9 29,3 67,2/72,2 19,1 23,3 22,8 23 37,1 7 9,5 22,5 15 20,2 19 17 C02GN0838
10 G3/8 G1/8 56,9 31,7 67,2/72,2 19,1 23,3 22,8 23 37,1 7 9,5 22,5 17,5 20,2 19 17 C02GN1038
10 G1/2 G1/4 70,8 33,1 81,3/78,5 25,6 26,3 29,1 28,7 47,4 8,5 13 28 17,5 27,2 24 23 C02GN1048
12 G3/8 G1/8 56,9 34,4 67,2/72,2 19,1 23,3 22,8 23 37,1 7 9,5 22,5 20,5 20,2 19 17 C02GN1238
12 G1/2 G1/4 70,8 35,8 81,3/78,5 25,6 26,3 29,1 28,7 47,4 8,5 13 28 20,5 27,2 24 23 C02GN1248
*1) min./max. control flow see page 5

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.23
 Pneufit® C series
PUSH-IN fittings, metric

Dimensions in mm
In-line flow control
Projection/First angle
C00GE
C
E
D

C1

øA

øK
1 2

N
1 2 B

ØA B C > C1 < C1 D E ØK N Model

4 12 45 30 33 3,3 15 11 13,5 C00GE0400
6 16 50 35 39,5 4,4 20,5 13 17,5 C00GE0600
8 19 55,5 37,5 42 4,4 23 15 20 C00GE0800
10 23 61 44 49 4,4 28 17,5 23 C00GE1000
12 26,5 70 47,5 53,5 4,4 32 20,5 25,5 C00GE1200
Control flow see page 4

In-line and panel mounting flow control

C00GP C
E
D
C1

C2

øA

øK
1 2

N
1 2
B

ØA B C > C1 < C1 C2 D E ØK N Panel hole Panel Model

thickness
4 12 42 35,5 38 5,5 3,2 15,5 11 13,5 12 11 5 C00GP0400
6 16 49,5 43 48,5 8 4,3 20,5 13 17,5 17 15 6 C00GP0600
8 19 56,5 47,5 53 8,5 4,3 23 15 20 19 17 6 C00GP0800
10 23 63 53,5 61,5 10,5 4,3 27,5 17,5 23 22 17 7 C00GP1000
12 26,5 73,5 57,5 64,5 12 4,4 32,5 20,5 25,5 24 21 7 C00GP1200
Control flow see page 4

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.24 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

In-line non-return valve (PBT) In-line non-return valve (Aluminium) Dimensions in mm

Projection/First angle
C00GL C00GL

C C

øA

øA
ØA C Model ØA C Model
4 42 C00GL0400 10 65 C00GL1000
6 47,5 C00GL0600 12 73 C00GL1200
8 55,5 C00GL0800

In-line non-return valve (in), taper thread In-line non-return valve (out), taper thread
C01G2 C01G3
C C
øA

øA
B

B
G G

IN OUT

ØA B C G Model ØA B C G Weight Model

(g)
4 R1/8 27,5 8 10 C01G20418
4 R1/8 27,5 8 10 11 C01G30418
6 R1/8 32,5 8 12 C01G20618
6 R1/8 32,5 8 12 16 C01G30618
8 R1/4 37,5 10 14 C01G20828
8 R1/4 37,5 10 14 24 C01G30828

In-line non-return valve (in), ISO G thread In-line non-return valve (out), ISO G thread
C02G2 C02G3
C C
øA

øA
B

G G

IN OUT

ØA B C G Model ØA B C G Model
4 M5 31,5 3,5 10 C02G20405 4 M5 31,5 3,5 10 C02G30405
4 G1/8 27,5 6 10 C02G20418 4 G1/8 27,5 6 10 C02G30418
6 G1/8 32,5 6 12 C02G20618 6 G1/8 32,5 6 12 C02G30618
8 G1/4 37 7 15 C02G20828 8 G1/4 37 7 15 C02G30828
10 G3/8 54 8 22 C02G21038 10 G3/8 54 8 22 C02G31038
12 G1/2 60,5 9 24 C02G21248 12 G1/2 60,5 9 24 C02G31248

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.25
 Pneufit® C series
PUSH-IN fittings, metric

Self sealing fittings Dimensions in mm

Projection/First angle

STOP
No air flow when tubing is removed - air flow is restored when tubing is inserted

Straight adaptor C Swivel elbow E

C0124 C014J

øA

øA
B

C
G
B

ØA B C G Model ØA B C E G Model
4 R1/8 26 8 10 C01240418 4 R1/8 27 27,5 5 10 C014J0418
6 R1/8 29 8 12 C01240618 6 R1/8 30 32 5 12 C014J0618
6 R1/4 29 10 14 C01240628 6 R1/4 32 30,5 6,5 14 C014J0628
8 R1/4 33,5 10 14 C01240828 8 R1/8 34,5 41,5 6,5 14 C014J0818
8 R3/8 33,5 11 17 C01240838 8 R1/4 34 40 6,5 17 C014J0828
10 R1/4 35,5 10 17 C01241028 10 R1/4 32 26,5 6,5 17 C014J1028
10 R3/8 35,5 11 17 C01241038 10 R3/8 36 45 6,5 17 C014J1038
10 R1/2 35,5 14 21 C01241048 10 R1/2 37,5 43 8 21 C014J1048
12 R1/4 42 10 19 C01241228 12 R3/8 40 53,5 6,5 19 C014J1238
12 R3/8 42 11 19 C01241238 12 R1/2 41,5 51,5 8 21 C014J1248
12 R1/2 42 14 21 C01241248

Straight adaptor Swivel elbow

C0224 C024J
C E
øA
øA
B

C
G
ØA B C G Model
B
4 G1/8 25,5 5 12 C02240418
6 G1/8 28 5 12 C02240618
6 G1/4 27 6,5 15 C02240628 ØA B C E G Model
8 G1/4 32 6,5 15 C02240828 4 M5 20,5 29,5 4 10 C024J0405
8 G3/8 32 6,5 17 C02240838 4 G1/8 27 27,5 5 14 C024J0418
10 G1/4 35 6,5 17 C02241028 6 M5 22,5 33 4 12 C024J0605
10 G3/8 36,5 6,5 17 C02241038 6 G1/8 30 32 5 14 C024J0618
10 G1/2 37,5 8 21 C02241048 6 G1/4 32 30,5 6,5 14 C024J0628
12 G1/4 43,5 6,5 19 C02241228 8 G1/4 34,5 41,5 6,5 17 C024J0828
12 G3/8 43,5 6,5 21 C02241238 8 G3/8 34 40 6,5 20 C024J0838
12 G1/2 44 8 21 C02241248 10 G1/4 32 26,5 6,5 17 C024J1028
10 G3/8 36 45 6,5 20 C024J1038
10 G1/2 37,5 43 8 24 C024J1048
Straight union 12 G3/8 40 53,5 6,5 20 C024J1238
C002J 12 G1/2 41,5 51,5 8 24 C024J1248
C
øA

ØA C Model
4 42 C002J0400
6 46 C002J0600
8 53,5 C002J0800
10 58 C002J1000
12 67 C002J1200

Our policy is one of continued research and development. We therefore reserve the right to amend,
en 9.1.020.26 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. 4/15
 Pneufit® C series
PUSH-IN fittings, metric

3/2 Shut-off valves 3/2 Shut-off valves Dimensions in mm

C
Projection/First angle
C01GG E C01GJ
ø 4,3
C
E
ø 4,3

B
N
G

øA

B
2 1

N
1

G
C1

C2

ØA B C C1 * C2 E G N O* Model
O 6 R1/8 62 40,5 26 19 8 18,5 18 14 C01GJ0618
1 Exhaust bore hole 6 R1/4 65 40,5 26 19 10 18,5 18 14 C01GJ0628
B C C1 E G N O Model 6 R3/8 66 40,5 26 19 11 18,5 21 17 C01GJ0638
R1/8 71 40,5 19 8 18,5 18 14 C01GG1818 8 R1/8 65 40,5 27,5 19 8 18,5 18 14 C01GJ0818
R1/4 77 40,5 19 10 18,5 18 14 C01GG2828 8 R1/4 66 40,5 27,5 19 10 18,5 18 14 C01GJ0828
R3/8 81 41 24 11 21,5 21 17 C01GG3838 8 R3/8 67 40,5 27,5 19 11 18,5 21 17 C01GJ0838
R1/2 90 41 24 14 21,5 21 21 C01GG4848 10 R1/4 70,5 41 31 24 10 21,5 18 17 C01GJ1028
10 R3/8 71,5 41 31 24 11 21,5 21 17 C01GJ1038
10 R1/2 74,5 41 31 24 14 21,5 21 21 C01GJ1048
3/2 Shut-off valves
12 R1/4 75,5 41 34 24 10 21,5 18 19 C01GJ1228
C01GH 12 R3/8 76,5 41 34 24 11 21,5 21 19 C01GJ1238
C
E 12 R1/2 79,5 41 34 24 14 21,5 21 21 C01GJ1248
ø 4,3
* see drawing C01GG series

3/2 Shut-off valves

C01GF C
øA
B

2 1 E
N

ø 4,3
G C2

ØA B C C1 * C2 E G N O* Model
øA

2 1

N
6 R1/8 62 40,5 26 19 8 18,5 18 14 C01GH0618
6 R1/4 65 40,5 26 19 10 18,5 18 14 C01GH0628
6 R3/8 66 40,5 26 19 11 18,5 21 17 C01GH0638
8 R1/8 63 40,5 27,5 19 8 18,5 18 14 C01GH0818 ØA C C1 * E N O* Model
8 R1/4 66 40,5 27,5 19 10 18,5 18 14 C01GH0828 6 52,5 40,5 19 18,5 18 C00GF0600
8 R3/8 67 40,5 27,5 19 11 18,5 21 17 C01GH0838 8 53 40,5 19 18,5 18 C00GF0800
10 R1/4 67 41 31 24 10 21,5 18 17 C01GH1028 10 62 41 24 21,5 21 C00GF1000
10 R3/8 71,5 41 31 24 11 21,5 21 17 C01GH1038 12 68,5 41 24 21,5 21 C00GF1200
10 R1/2 74,5 41 31 24 14 21,5 21 21 C01GH1048
* see drawing C01GG series
12 R1/4 75,5 41 34 24 10 21,5 18 19 C01GH1228
12 R3/8 76,5 41 34 24 11 21,5 21 19 C01GH1238
12 R1/2 79,5 41 34 24 14 21,5 21 21 C01GH1248
* see drawing C01GG series

Warning
These products are intended for use in industrial compressed air The system designer is warned to consider the failure modes of all
systems only. Do not use these products where pressures and component parts used in fluid power systems and to provide adequate
temperatures can exceed those listed under safeguards to prevent personal injury or damage to equipment in the
»Technical features/data«. event of such failure.
Before using these products with fluids other than those specified, System designers must provide a warning to end users in the system
for non-industrial applications, life-support systems or other instructional manual if protection against a failure mode cannot be
applications not within published specifications, consult IMI NORGREN. adequately provided.
System designers and end users are cautioned to review specific
Through misuse, age, or malfunction, components used in fluid warnings found in instruction sheets packed and shipped with these
power systems can fail in various modes. products.

Our policy is one of continued research and development. We therefore reserve the right to amend,
4/15 without notice, the specifications given in this document. (2006 - 9005f) © 2015 Norgren Ltd. en 9.1.020.27