Scribd
Upload
146 views1 page

Product Specification: 4310M-4310M HCF1/2 LM

This document provides product specifications for a 1/2" super flexible cable assembly with 4310M male connectors on both ends. The cable has an inner conductor of copper-clad aluminum wire, dielectric of physical foam polyethylene, outer conductor of corrugated copper tube, and black PE jacket. Key specs include impedance of 50 ohms, insertion loss up to 6 GHz, insulation resistance over 10,000MΩ, operating temperature from -45°C to +85°C, and compliance with RoHS environmental standards.

Uploaded by

latinocomm2009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
146 views1 page

Product Specification: 4310M-4310M HCF1/2 LM

This document provides product specifications for a 1/2" super flexible cable assembly with 4310M male connectors on both ends. The cable has an inner conductor of copper-clad aluminum wire, dielectric of physical foam polyethylene, outer conductor of corrugated copper tube, and black PE jacket. Key specs include impedance of 50 ohms, insertion loss up to 6 GHz, insulation resistance over 10,000MΩ, operating temperature from -45°C to +85°C, and compliance with RoHS environmental standards.

Uploaded by

latinocomm2009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Product Specification

4310M-4310M HCF1/2 Lm HXT2015 Rev: A0

1/2" Super Flexible Cable Assembly


4310 Male To 4310 Male

Product Description
Jumper Length Lm(As Per Customized)
Cable Type HRCAY-50-9(1/2" Super Flexible)
Inner Conductor Copper-Clad Aluminum Wire
Dielectric Physical Foam Polyethylene
Outer Conductor Corrugated Copper Tube
Jacket Black PE
Connector Type 4.3-10 type male(Screw Type) 4.3-10 type male(Screw Type)
Inner Conductor Pin Brass/Silver Plating Brass/Silver Plating
Body&Outer Conductor Brass/Trimetal Plating Brass/Trimetal Plating
Insulator PTFE PTFE
Gasket Silicon Rubber Silicon Rubber
Nut Brass/Nickel Plating Brass/Nickel Plating

Electrical Specifications
Characteristics Impedance 50 Ohm
Frequency Range DC~6 GHz
Insulation Resistance ≥10000MΩ
Dielectric Withstanding Voltage 2500V rms (DC)
Operating Voltage 1500V
Insertion Loss @DC-2.7GHz ≤0.21*L+0.2dB (L=Cable Length)
VSWR @0.8-1.0GHz ≤1.08
@1.7-3.0GHz ≤1.10
PIM3 @1800MHz(2*43dBm) ≤-160dBc

Environmental & Mechanical Specifications


Cable Tensile resistance ≥500N
Torque Proof (Nut) 4310M：5N.m
Storage Temperature -45°C to +65°C
Operating temperature -45°C to +85°C
Water Proof level IP68 24hr, 1m, 20℃
RoHS Compliant

Regulatory Compliance / Certification


ISO 9001:2015 Compliant

The facts and figures contained herein are carefully complied to the best of our knowledge, but they are intended for
general informational purposes only.
www.hengxin.com

DISTRIBUIDOR AUTORIZADO EN ; CHILE- COLOMBIA - ECUADOR - COSTA RICA.


Bogotá-Colombia: Calle 150 # 10-54 of 201- WhatsApp: +56 9 9401 5884 Cel: +57 314 693 9477 Email: sergio [email protected]
Santiago-Chile: Los Corraleros 08160 C77 Condominio Cumbres del Peñon Email: [email protected] tel: +56 9 94014503

You might also like