Scribd
Upload
44 views1 page

Planta de Relleno Hidraulico Cementado DATA SHEET N°: W51-2019-7102-3000-IC-DSH-013 LUBRICATED PLUG VALVE

This document provides specifications for lubricated plug valves used in a cement slurry filling plant, including technical details about the valve body, trim, actuator, and solenoid. The valves have a 3" ANSI 150 flanged connection and full port design, with carbon steel construction. They are designed to operate with a maximum pressure of 140 psi and temperature of 25°C, controlling the flow of process water in the liquid phase with densities up to 1000kg/m3. Pneumatic actuators will open and close the valves within 2 inches per second when signals are received from solenoids located in a shared NEMA 4 rated electrical cabinet.

Uploaded by

Anthony Inostroza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views1 page

Planta de Relleno Hidraulico Cementado DATA SHEET N°: W51-2019-7102-3000-IC-DSH-013 LUBRICATED PLUG VALVE

This document provides specifications for lubricated plug valves used in a cement slurry filling plant, including technical details about the valve body, trim, actuator, and solenoid. The valves have a 3" ANSI 150 flanged connection and full port design, with carbon steel construction. They are designed to operate with a maximum pressure of 140 psi and temperature of 25°C, controlling the flow of process water in the liquid phase with densities up to 1000kg/m3. Pneumatic actuators will open and close the valves within 2 inches per second when signals are received from solenoids located in a shared NEMA 4 rated electrical cabinet.

Uploaded by

Anthony Inostroza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Planta de Relleno Hidraulico Cementado

DATA SHEET N°: W51-2019-7102-3000-IC-DSH-013 LUBRICATED PLUG VALVE


Project: Ingenieria de Detalle para la Planta de Relleno Hidraulico Cementado - Colquisiri By: C. Romero
Number: W51-2019-D01-7102 Rev. J. Salvá
Tag Equipment: 200-HV-221, 300-HV-301, HV-321. Apr: J. Lara
Date: 5/28/2020 Tech.Specification W51-2019-7102-3000-I-CDD-001 Rev: A
1 W51-2019-D01-7102-DE-I-300-001 300-HV-301 Units Normal Max.
P&ID Nº W51-2019-D01-7102-DE-I-300-002 300-HV-321 Flow Rate m3/h 58.4 72.9
GENERAL

Inlet Pressure psi 67 67


2 Altitude 180 m a.s.l. Pressure Drop psi VTS VTS
3 Ambient temperature 12 to 20°C Average Operating Temperature °C 5.0 25

PROCESS
4 Area class UNCLASSIFIED Relative Humidity (%)
75 to 90 Avg max. Operating Solids by mass % Cw. 1 1
5 Line Size/Sched 3" ANSI #150 Operating Density kg / m3 1000 1000
6 Pipe Material C.S. Operating Viscosity cP 1
PIPE

7 Yield stress Pa 0
8 Fluid & Fluid phase PROCESS WATER - LIQUID
9 Pipe Isolation None Design Press. 140 psi Design Temp. 25°C
10 Manufacturer Valve Switches TAG Proposed
11 Max. Pressure Max. Temp. 140 psi 25°C HV-221 HV221-L HV221-H
12 Body Type SLOTTED LUG HV-321 HV321-L HV321-H
13 Body / Bonnet Material CARBON STEEL A216 WCB
VALVE BODY

14 Liner Material / ID SLEEVES / ELASTOMER


15 End Connect: Flg / Size / Class ANSI B16.5 FF
16 End Ext / Material Bolting Material VTS STEEL
17 Cover A216 WCB
18 Flow to Open / Close OPENS
19 Flow Direcction BI-DIRECTIONAL
20 Packing Material / Type FLEXIBLE GRAPHITE / PTFE
21 Port Type FULL PORT
22 Port Size Rated Travel VTS VTS
23 Seal Material / Liner ELASTOMER / URETHANE
VALVE TRIM

24 Retainer Mat. Gasket Mat STEEL Flexible graphite+stailess steel/PTFE


25 Rated CV / FL / XT
26 Sleeve Material Plug material SS A182 F304
27 Seat Material Ring Mat. ELASTOMER URETHANE
28 Gate / Guide Material O´Ring CAST STEEL NBR / FEP / SBR
29 Stem Material CARBON STEEL A216 WCB
30 Pneumatic cylinder Manufacturer Model N°
31 Type Size PNEUMATIC CYLINDER
32 On/Off or Modulating Operat. Speed ON / OFF 2 inch/s
33 When De-Energize Handwheel Type Close NO REQUIRED
ACTUATOR

34 Actuator Orientation VERTICAL UP N/A


35 Available Air Supply: Min to Max 72 to 100 psi
36 Bench Range: Min to Max. N/A
37 Action: ATO/ATC Fail Position ATON / ATC FAIL TO CLOSE
38 Min Req Press. Enclosure 72 psi NEMA 4
39 Motive Power Power Supply N/A N/A
40 Power / Control Connection Tubing: Neumatic Distribution cabinet to actuator
41 Open & Close Switch Mechanical Limit switch, SPDT
POSITION

42 Rating (Amps/Volt/Hz.) 2 A. 250 VAC, 60 Hz.


43 Accessories included Included switches connection box, cable entry 3/4" NPT-F
44 Manufacturer Cabinet drawing W51-2019-D01-7102MD-000-011 Model N°
SOLENOID / ACTUATOR TAG

45 Solenoids located in Neumatic cabinet, air set and manifold, shared w. 6 valves
46 Coil Rating/P.Supply 220 VAC 60 Hz, 1 Ph
47 Neumatic cabinet characteristics Cabinet NEMA 4, with door with transparent window
48 Air and electrical power lines entries from the bottom
49 Cable entry 1" NPT-F
50 Share the cabinet and manifold with 5 other valves
51 Cable entry 1" NPT-F
52 Coil conn Pneumatic conn. Ø 2.5 mm VTS
53 1. AFFIX ENGRAVED SS TAG TO VALVE, ACTUATOR AND JUNCTION BOX
NOTES

54 2. NUMBER OF UNITS TO PROVIDE 2 UNITS


55 3. VTS = VENDOR TO SPECIFY.
56

Lara Consulting 1 de 1

You might also like