TEST REPORT

Name of Customer HSCC (INDIA) LIMITED Report No. 1067

Site Office- AIIMS Project, Plot no - 02, Sector -20, MIHAN, Near W Building,
Address of Customer Report Date 6/5/2020
Nagpur -441108

HSCC/AIIMS NAGPUR/Material
Name of Contractor M/s AHLUWALIA CONTRACTS (INDIA) LIMITED Ref. No. Testing/2019-20 Dated 29.05.2020

Construction of Hospital and Academic Campus at AIIMS Nagpur, including internal and external Electrical, HVAC, PHE, Fire Fighting,
Name of Work
External Development etc. and their maintenance during defect liability period.

BIPL Ref No. BIPL/0231

Sample Description Wet Mix Macadam
Sampled By Customer

Dt. of Sample Received 29.05.2020 Name of Test Physical Test

As per Morth 5th

Dt. of Test Conducted From 30.05.2020 Onwards Test Method Specification

TEST ON WET MIX MACADAM (WMM) AS PER MORTH 5TH REVISION

A. Material Source and Percent Proportions :

S.No Material Description % Proportions Source/Location

MEDICAL LAB (SOUTH SIDE) TO DIRECTOR BUNGLOW (EAST SIDE) JUNCTION

1 WMM 100.00% ROAD, ROAD No. 16

B. Grading For WMM Mix

I.S. Sieve Size

1 53.0 45.0 22.4 11.2 4.75 2.36 0.600 0.075
(mm)

2 % PASSING 100.0 92.13 74.98 51.63 32.58 21.69 10.98 2.36

Limits As Per
3 MORT&H 100 95-100 60-80 40-60 25-40 15-30 8-22 0-5
Table 400-13

C. Physical Characteristics of WMM Mix :

Specification Limits as per

S.No Test Description Test Method Test Results
MORTH 5th Rev.

1 Atterberg's Limits

a) Liquid Limit (%) 18.3 -

IS:2720 (P-5)
b) Plasticity Index (%) Non Plastic 6% Max.

2 Combine Flakiness & Elongation IS:2386 (P-3) 29.05 35 Max.

3 Water Absorption of Aggregates (%) 1.18 2% Max.

IS:2386 (P-3)
4 Specific Gravity 2.838 -

5 Aggregate Impact Value (Dry)(%) 12.80 30% Max

IS:2386 (P-4)
6 Los Angeles Abrasion Value (%) 14.51 40% Max

7 Modified Compaction

a) Maximum Dry Density (gm/cc) 2.248

IS:2720 (P-8) Not Specified
b) Optimum Moisture Content (%) 4.30
Remarks:-

P.N. 1 of 6
Source / Location : MEDICAL LAB (SOUTH SIDE) TO DIRECTOR BUNGLOW (EAST SIDE) JUNCTION ROAD, ROA
Type of Materials : Wet Mix Macadam

Specified Limits
IS Sieve mm % Passing
Median Lower Upper

53.0 100.0 100.00 100 100

45.0 92.13 97.50 95 100

22.4 74.98 70.00 60 80

11.2 51.63 50.00 40 60

4.75 32.58 32.50 25 40

2.36 21.69 22.50 15 30

0.600 10.98 15.00 8 22

0.075 2.36 2.50 0 5

110

100
Lower
90

80 Upper
70 % Passing
% Passing

60
Median
50

40

30

20

10

0
0.3 3.0 30.0

Sieve Size (mm)

P.N. 2 of 6
 MEDICAL LAB (SOUTH SIDE) TO DIRECTOR BUNGLOW
Source Volume of Moulds (cc) 2244.3 cc
(EAST SIDE) JUNCTION ROAD, ROAD No. 16
Sample Description : Wet Mix Macadam Weight of Empty Mould (gms) 6196 gms

MODIFIED PROCTOR COMPACTION TEST

Weight of Soil gms (IS: 2720, Part 8)
Weight of Mould +

Wt. Of Water gms

Wt. dry Soil gms

Moisture Content
Wet Soil gms
Container no.
Wet density

REMARKS
Dry Density
Soil gms
Sr. No.

gm/cc

gm/cc
%
1 11031 4835 2.154 8 1000.00 984.5 15.50 1.57 2.121

2 11234 5038 2.245 17 1000.00 972.3 27.70 2.85 2.183

3 11451 5255 2.341 12 1000.00 959.6 40.40 4.21 2.247

4 11423 5227 2.329 10 1000.00 952.5 47.50 4.99 2.218

5 11362 5166 2.302 14 1000.00 931.9 68.10 7.31 2.145

2.280

2.260
Dry Density in gm/cc

2.240

2.220

2.200

2.180

2.160

2.140

2.120

Specification :
2.100
1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00
Moisture %

M.D.D. (gm/cc) = 2.248

O.M.C. (%) = 4.30

Verified by For Becquerel Industries Pvt. Ltd.

Mr Imran Khan Mr. P. S. Chouhan

Dy Technical Manager Quality Head
P.N. 3 of 6
 CALIFORNIA BEARING RATIO
IS 2720 (Part 16)-1979
Client HSCC (INDIA) LIMITED Date: 6/5/2020
Report No.: 1067
Construction of Hospital and Academic Campus at AIIMS Nagpur, including internal
Project and external Electrical, HVAC, PHE, Fire Fighting, External Development etc. and
their maintenance during defect liability period. GSB Grading I

Material GSB Mix Grading I

Sample Type: Disturbed
used

Type of Compaction: Modified Condition of Specimen : Soaked

OMC (%) : 2.248 Period of Soaking : 96 hr
MDD (kg/cm ): 3
4.30 Surcharge Weight Weight Used : 2.5 Kg

LOAD PENETRATION CURVE

2500
Soaked
Polynomial
(Soaked )

2000
Load (kg)

1500

1000

500

0
0 2 4 6 8 10 12 14

Penetration (mm)

Results:
Soaked

CBR of Specimen at 2.5 mm Penetration 50.32

CBR of Specimen at 5 mm Penetration 57.86

Verified by For Becquerel Industries Pvt. Ltd.

Mr Imran Khan Mr. P. S. Chouhan

Dy Technical Manager Quality Head
P.N. 4 of 8
 CBR - Unsoaked Condition CBR - Soaked Condition

12.00 2500.00
Standard
Modified
10.00
Disturbed 2000.00
Load in Kg

Undisturbed
8.00
1500.00

Load in Kg
6.00

1000.00
4.00

500.00
2.00

0.00 0.00
0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 0 2 4 6 8 10 12 14
Penetration in mm Penetration in mm
0 12 14
 FORMAT NO: BIPL/QSFM/7.11/39A

IS: 2386 (Part I) 1963 - (RA 2016)

SRAF No. Date

Date Of Test From To

Sample I/M GSB Mix Grading - Max. Size of Material Present in Substantial Quantity in mm

Visual Classification Max. Individual Particle Size Present in mm

□ Oven Dry □ Dry At

Air Dry Condition Wt. Of Sample Taken For Analysis -gms 5000
Room Temp.
Max. Size of Material
Present in Substantial 63 50 40/31.5 25 20/16 12.5 10 6.3 4.75 2.36
Quantity in mm →
Mass to be taken for test
50 35 15 5 2 1 0.5 0.2 0.2 0.1
in Kg. →

Accuracy of balance required 0.1 % of the weight of the test sample.

Sieve Size-mm Wt. Retained-gms % Retained Cumulative % Passing % Passing

75.0 0.00 0.00 0.00 100.0

53.0 393.50 7.87 7.87 92.1

26.5 857.50 17.15 25.02 75.0

9.5 1167.50 23.35 48.37 51.6

4.75 952.50 19.05 67.42 32.6

2.36 544.50 10.89 78.31 21.7

0.425 535.50 10.71 89.02 11.0

0.075 431.00 8.62 97.64 2.4

Results = Sample Complies to Zone Fineness Modulus =

IS Sieves -mm 2.36 1.18 0.6 0.3 0.15 0.075

Maximum weight to be retain at the
completion of sieving Maximum wt. For 20 mm
200 100 75 50 40 25
dia. sieve–gms.
Equipments Used :

Oven BIPL/133 Balance BIPL/201 Sieve BIPL/63 to BIPL/281H

Analyst By Checked By
(Asst. Manager/Technician) (Dy. Tech Manager)

Name of Laboratory: Becquerel Industries Pvt. Ltd

Document No.: BIPL/QSFM/8.3 Document Name: Quality System Format

Amend
Issue No.: 04 Issue Date: 01.08.2018 Amend Date: 29.08.2019
No.02
Prepared
by: Issued by:
 Amend
Issue No.: 04 Issue Date: 01.08.2018 Amend Date: 29.08.2019
No.02
Prepared
by: Issued by:
 FORMAT NO: BIPL/QSFM/7.11/39B
WATER ABSORPTION & SPECIFIC GRAVITY OF FINE AGGREGATE
IS : 2386 (Part 3) – 1963 (RA 2016) – Method I

SRAF No. Date

Date Of Test From To

Sample I/M Maximum Particle Size in mm

Visual
Weight of Sample Taken – gms.
Classification
Room
Water Temperature 0C
Temperature 0C

Date at which sample immersed in water for 24±1/2 hours

Date at which sample kept in oven at temp. 100 0C to 1100C for 24±1/2 hours

The Difference in temperature of between two weighing shall not

Balance accuracy reqd. 0.5 gms.
exceed by 20C

Temperature of Water required between 22 0C to 320C Oven Temperature Reqd. between 1000C to 1100C

Observations

Pyknometer No.
Water (Weight of Basket + Aggregate in A1) – gms 2169.0 2146.0
Weight of Empty Basket in Water (A2) – gms 723.0 723.0
Weight of Saturated Aggregate in Water (A) = (A1 – A2) – gms 1446.0 1423.0
Weight of Saturated Surface Dry Aggregate in Air (B) – gms 2214.0 2188.0
Weight of Oven Dried Aggregate in Air (C) – gms 2188.0 2163.0
Specific Gravity = C/(B - A) 2.849 2.827
Apparent Specific Gravity = C/(C - A) 2.949 2.923

Water Absorption (% by Dry Weight) = (100 x (B - C))/C 1.19 1.16

Average Specific Gravity 2.838

Average Water Absorption - % 1.18

Equipments Used :
Oven BIPL/275 BalanceBIPL/168
Pyknome
PYK/001 Thermometer BIPL/5A
ter

Analyst By Checked By
(Asst. Manager/Technician) (Dy. Tech Manager)

Name of Laboratory: Becquerel Industries Pvt. Ltd

Document No.: BIPL/QSFM/8.3 Document Name: Quality System Format

Issue Issue Date:

Amend No.02 Amend Date: 29.08.2019
No.: 04 01.08.2018
Prepared by: Issued by:
 FORMAT NO: BIPL/QSFM/7.11/39E
IMPACT VALUE OF COARSE AGGREGATE
IS : 2386 (Part 4) – 1963 (RA 2016)

SRAF No. Date

Date Of Test From To

Sample I/M

Observations

Weight of Empty Cup (W1) – gms. 1780 1780

Weight of Cup + Aggregate (W2) – gms. 2238 2236

Weight of Aggregate (A) = (W2 – W1) – gms 458 456

Weight of Aggregate Passing 2.36 mm Sieve (B) – gms. 59 58

Weight of Aggregate Retained on 2.36 mm Sieve (C) – gms. 399 398

Total Weight Passing + Retained on 2.36 mm Sieve (B+C) – gms. 458 456

Aggregate Impact Value of Aggregate in % = (B/A)x100 12.88 12.72

Average Impact Value - % 12.80

Notes

1.       The test sample shall be taken as aggregate passing 12.5 mm sieve & retained on 10 mm sieve.

2.       The test sample shall be dried in an oven for four hours at temperature of 100 0C to 1100C and then cooled it.

3.       The impact cup shall be filled about one-third with test samples & tamped with 25 strokes & again repeat it for each layer.

4.       On test sample give total 15 blows at an interval of not less than one second.

5.       Accuracy of Balance required 0.1 gms

6.       If total weight (B+C) is less than the initial weight (A) by more than one gram, then result shall be discarded & a fresh test required.

7.       Individual impact value shall be recorded to the first decimal place.

8.       Average impact value shall be reported to the nearest whole number.

Equipments Used :

Impact Machine BIPL/130 BalanceBIPL/168

Tamping Rod BIPL/78K SieveBIPL/61, BIPL/63, BIPL/281A

Measure BIPL/75G OvenBIPL/275

Analyst By Checked By
(Asst. Manager/Technician) (Dy. Tech Manager)

Name of Laboratory: Becquerel Industries Pvt. Ltd

Document No.: BIPL/QSFM/8.3 Document Name: Quality System Format

Issue Date: Amend Date:

Issue No.: 04 Amend No.02
01.08.2018 29.08.2019
Prepared by: Issued by:
 FORMAT NO: BIPL/QSFM/7.11/39H
TEN PERCENT FINES VALUE OF COARSE AGGREGATE
IS : 2386 (Part 4) – 1963 (RA 2016)

SRAF No. Date

Date Of Test From To

Sample I/M

Depth of Penetration Required in 10 minutes after applying load on Aggregate samples

Penetration in mm 15 20 24

Rounded or Partially Honeycombed Aggregate

Type of Sample Rounded Aggregate Normal Crushed Aggregate
(Uncrushed Gravels) (Shales, Slags)

Observations :

Weight of Empty Cylinder (W1) – gms. 11628 11628

Weight of Cylinder + Aggregate (W2) – gms. 14407 14412

Weight of Aggregate (A) = (W2 – W1) – gms 2779 2784

Weight of Aggregate Passing 2.36 mm Sieve (B) – gms. 298 290

% Fines Passing Through Sieve (Y) = (B/A)x100 10.72 10.42

Load Required for Penetration (X) – tonnes 24.6 24.7

Load Required For 10 % Fines = 23.4 23.98

Average Load Required For 10 % Fines – tonnes 23.69

Average Load Required For 10 % Fines – KN 232.4

Notes

1.       About 6.5 kg of natural Aggregate req. to provide the two test samples . Less of light weight aggregate is required.

2.       The test sample shall be taken as aggregate passing 12.5 mm sieve & retained on 10 mm sieve.

3.       The test sample shall be dried in an oven for four hours at temperature of 100 0C to 1100C and then cooled it up to room temperature.

4.       The cylinder shall be filled about one-third with test samples & tamped with 25 strokes & again repeat it for each layer. Total 3 Layers. Depth of sample
shall be 10 cms.

5.       Accuracy of Balance required 1 gms having capacity 3 kg.

6.       Normally % Fines Passing through Sieve falls within the range of 7.5 % to 12.5 %. Beyond these range load should be adjusted & repeat the test up to %
fines within the range of 7.5 % to 12.5 %.
7.       The load required to 10 % fines shall be reported to nearest whole number for loads of 10 tonnes or more and nearest 0.5 tonnes for loads less than 10
tonnes.

Equipments Used :

CTM BIPL/34 BalanceBIPL/168

Tamping Rod BIPL/78J Sieve BIPL/61, 63, 281A

Cylinder BIPL/25D OvenBIPL/275 Measuring CylinderBIPL/25E

Analyst By Checked By
(Asst. Manager/Technician) (Dy. Tech Manager)

Name of Laboratory: Becquerel Industries Pvt. Ltd

Document No.: BIPL/QSFM/8.3 Document Name: Quality System Format
Issue No.: 04 Issue Date: 01.08.2018 Amend No.02 Amend Date:
29.08.2019
Prepared by: Issued by:
 FORMAT NO: BIPL/QSFM/7.11/39G
ABRASION VALUE OF COURSE AGGREGATE BY LOS ANGELES MACHINE
IS: 2386 (Part 4) – 1963 (RA 2016)

SRAF No. Date

Date Of Test

Sample I/M

Grading of Test Samples

Sieve Size (Square Hole) Weight in gms of Test Sample For Grade

Passing – mm Retained - mm A B C D E F G

80 63 ----- ----- ----- ----- 2500 ----- -----

63 50 ----- ----- ----- ----- 2500 ----- -----

50 40 ----- ----- ----- ----- 5000 5000 -----

40 25 1250 ----- ----- ----- ----- 5000 5000

25 20 1250 ----- ----- ----- ----- ----- 5000

20 12.5 1250 2500 ----- ----- ----- ----- -----

12.5 10 1250 2500 ----- ----- ----- ----- -----

10 6.3 ----- ----- 2500 ----- ----- ----- -----

6.3 4.75 ----- ----- 2500 ----- ----- ----- -----

4.75 2.36 ----- ----- ----- 5000 ----- ----- -----

Grading A B C D E F G
Abrasive Charge
Used No. Of Spheres 12 11 8 6 12 12 12

Weight of Charge 5000 ± 25 4584 ± 25 3330 ± 20 2500 ± 15 5000 ± 25 5000 ± 25 5000 ± 25

Machine Revolutions 500 500 500 500 1000 1000 1000

Observations

Weight of Aggregate for Testing (A) – gms 5000

Weight of Aggregate Retained on 1.70 mm Sieve (B) - gms 4185

Weight of Aggregate Passing 1.70 mm Sieve (C) – gms 725.3

Aggregate Abrasion Value (Wear) in % = (C/A)x100 14.51

Notes

1.       The test sample shall be dried in an oven for four hours at temperature of 100 0C to 1100C and then cooled it at room temperature.

2.       The machine rotated at a speed of 20 to 33 rev/min.

3.       The material coarser than the 1.7 mm sieve shall be washed dried in an oven at 105 to 110 0C

4.       Accuracy of weight required 1 gms.

Equipments Used :

Los Angeles Machine BIPL/122 BalanceBIPL/168

Oven BIPL/275 SieveBIPL/44 to BIPL/76

Analyst By Checked By
(Asst. Manager/Technician) (Dy. Tech Manager)

Name of Laboratory: Becquerel Industries Pvt. Ltd

Document No.: BIPL/QSFM/8.3 Document Name: Quality System Format

Issue Date:
Issue No.: 04 Amend No.02 Amend Date: 29.08.2019
01.08.2018
Prepared by: Issued by: