Scribd
Upload
46 views1 page

Field Remote Instrument Enclosure: FD-1801 Loop Drawing

The document describes a field remote instrument enclosure. It lists the field designation as FD-1801 and indicates it has a PLC with tag 0 in rack 0 slot 0 channel 0. The document also notes that cable shields should be grounded at the marshalling ground terminal point and relates the field designation to a flame detector that loads pumps number 1 with a +24V signal.

Uploaded by

kurmakk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views1 page

Field Remote Instrument Enclosure: FD-1801 Loop Drawing

The document describes a field remote instrument enclosure. It lists the field designation as FD-1801 and indicates it has a PLC with tag 0 in rack 0 slot 0 channel 0. The document also notes that cable shields should be grounded at the marshalling ground terminal point and relates the field designation to a flame detector that loads pumps number 1 with a +24V signal.

Uploaded by

kurmakk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FIELD REMOTE INSTRUMENT ENCLOSURE

FD-1801 0 1 PLC 0
PLC Tag 0
+ FGS-JB-1800+ 1 + Rack 0
- FGS-JB-1800- Core # 0 - Slot 0
Channel 0

NOTES: Loop Drawing


Cable Shields to be grounded at the FD-1801
marshalling ground terminal point Flame Detector Loading Pumps #1 (+24V)

0 NM APPROVED Mar-13
REV # BY COMMENT DATE www.Automationforum.in
REVISION DETAILS

You might also like