CE51A
Uploaded by
Diana PontillasCE51A
Uploaded by
Diana PontillasSunday, March 22, 2020, 06:13 PM
PAGE NO. 1
****************************************************
* *
* STAAD.Pro V8i SELECTseries5 *
* Version 20.07.10.41 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= MAR 22, 2020 *
* Time= 17:57:28 *
* *
* USER ID: *
****************************************************
1. STAAD SPACE
INPUT FILE: RC Final.STD
2. START JOB INFORMATION
3. ENGINEER DATE 22-MAR-20
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 0 0 0; 2 3.075 0 0; 3 8 0 0; 4 0 3 0; 5 3.075 3 0; 6 8 3 0; 7 0 6 0
9. 8 3.075 6 0; 9 8 6 0; 10 0 0 3.2; 11 3.075 0 3.2; 12 8 0 3.2
10. 13 0 3 3.2; 14 3.075 3 3.2; 15 8 3 3.2; 16 0 6 3.2; 17 3.075 6 3.2
11. 18 8 6 3.2; 19 0 0 8.2; 20 3.075 0 8.2; 21 8 0 8.2; 22 0 3 8.2
12. 23 3.075 3 8.2; 24 8 3 8.2; 25 0 6 8.2; 26 3.075 6 8.2; 27 8 6 8.2
13. 28 0 0 12.5; 29 3.075 0 12.5; 30 8 0 12.5; 31 0 3 12.5; 32 3.075 3 12.5
14. 33 8 3 12.5; 34 0 6 12.5; 35 3.075 6 12.5; 36 8 6 12.5
15. MEMBER INCIDENCES
16. 1 4 5; 2 5 6; 3 7 8; 4 8 9; 5 1 4; 6 2 5; 7 3 6; 8 4 7; 9 5 8; 10 6 9
17. 11 13 14; 12 14 15; 13 16 17; 14 17 18; 15 10 13; 16 11 14; 17 12 15
18. 18 13 16; 19 14 17; 20 15 18; 21 22 23; 22 23 24; 23 25 26; 24 26 27
19. 25 19 22; 26 20 23; 27 21 24; 28 22 25; 29 23 26; 30 24 27; 31 31 32
20. 32 32 33; 33 34 35; 34 35 36; 35 28 31; 36 29 32; 37 30 33; 38 31 34
21. 39 32 35; 40 33 36; 41 4 13; 42 5 14; 43 6 15; 44 7 16; 45 8 17
22. 46 9 18; 47 13 22; 48 14 23; 49 15 24; 50 16 25; 51 17 26; 52 18 27
23. 53 22 31; 54 23 32; 55 24 33; 56 25 34; 57 26 35; 58 27 36
24. ELEMENT INCIDENCES SHELL
25. 59 4 6 33 31; 60 7 9 36 34
26. ELEMENT PROPERTY
27. 59 60 THICKNESS 0.1
28. DEFINE MATERIAL START
29. ISOTROPIC CONCRETE
30. E 2.17185E+007
31. POISSON 0.17
32. DENSITY 23.5616
33. ALPHA 1E-005
34. DAMP 0.05
35. TYPE CONCRETE
36. STRENGTH FCU 27579
37. END DEFINE MATERIAL
38. MEMBER PROPERTY
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 1 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 2
39. 5 TO 10 15 TO 20 25 TO 30 35 TO 40 PRIS YD 0.2 ZD 0.4
40. 1 TO 4 11 TO 14 21 TO 24 31 TO 34 41 TO 58 PRIS YD 0.4 ZD 0.2
41. CONSTANTS
42. MATERIAL CONCRETE ALL
43. SUPPORTS
44. 1 TO 3 10 TO 12 19 TO 21 28 TO 30 FIXED
45. LOAD 1 LOADTYPE DEAD TITLE DL
46. SELFWEIGHT Y -1 LIST ALL
47. LOAD 2 LOADTYPE LIVE REDUCIBLE TITLE LL
48. FLOOR LOAD
49. YRANGE 3 6 FLOAD -5 GY
**NOTE** about Floor/OneWay Loads/Weights.
Please note that depending on the shape of the floor you may
have to break up the FLOOR/ONEWAY LOAD into multiple commands.
For details please refer to Technical Reference Manual
Section 5.32.4.2 Note d and/or "5.32.4.3 Note f.
50. PERFORM ANALYSIS
P R O B L E M S T A T I S T I C S
-----------------------------------
NUMBER OF JOINTS 36 NUMBER OF MEMBERS 58
NUMBER OF PLATES 2 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 12
SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER
ORIGINAL/FINAL BAND-WIDTH= 29/ 13/ 72 DOF
TOTAL PRIMARY LOAD CASES = 2, TOTAL DEGREES OF FREEDOM = 144
SIZE OF STIFFNESS MATRIX = 11 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 12.2/ 197772.1 MB
51. START CONCRETE DESIGN
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 2 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 3
52. CODE ACI
53. FC 21000 ALL
54. FYMAIN 415000 ALL
55. FYSEC 415000 ALL
56. DESIGN BEAM 1 TO 58
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 3 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 4
=====================================================================
BEAM NO. 1 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3075. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 0. 1823. YES NO
2 343. 2 - 12MM 0. 767. YES NO
3 343. 2 - 12MM 1155. 3075. NO YES
B E A M N O. 1 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.70 KNS Vc= 49.80 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.83 KNS Vc= 49.86 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 4J____________________ 3075X 200X 400_____________________ 5J____
| |
||================= ===============================================||
| 2No12 H 343. 0.TO 767 2No12 H 343.1155.TO 3075 |
| |
| 2No12 H 57. 0.TO 1823 |
||============================================ |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______ _______
| | | | | | | | | | | | | |
| oo | | oo | | | | oo | | oo | | oo | | oo |
| 2#12 | | 2#12 | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | | | |
| oo | | oo | | oo | | oo | | | | | | |
| | | | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 4 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 5
=====================================================================
BEAM NO. 2 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4925. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 839. 4291. NO NO
2 343. 2 - 12MM 0. 1331. YES NO
3 343. 2 - 12MM 3799. 4925. NO YES
B E A M N O. 2 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 4.73 KNS Vc= 52.31 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.28 KNS Vc= 52.31 KNS Vs= 0.00 KNS
Tu= 0.03 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 5J____________________ 4925X 200X 400_____________________ 6J____
| |
||=================== =================||
| 2No12 H 343. 0.TO 1331 2No12 H 343.3799.TO 4925 |
| |
| 2No12 H 57. 839.TO 4291 |
| ======================================================= |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______ _______
| | | | | | | | | | | | | |
| oo | | oo | | | | | | | | oo | | oo |
| 2#12 | | 2#12 | | | | | | | | 2#12 | | 2#12 |
| | | | | | | | | | | | | |
| | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| | | | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 5 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 6
=====================================================================
BEAM NO. 3 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3075. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 0. 1568. YES NO
2 343. 2 - 12MM 0. 510. YES NO
3 343. 2 - 12MM 1155. 3075. NO YES
B E A M N O. 3 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.32 KNS Vc= 52.33 KNS Vs= 0.00 KNS
Tu= 0.09 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.21 KNS Vc= 52.33 KNS Vs= 0.00 KNS
Tu= 0.09 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 7J____________________ 3075X 200X 400_____________________ 8J____
| |
||=========== ===============================================||
| 2No12 H 343. 0.TO 510 2No12 H 343.1155.TO 3075 |
| |
| 2No12 H 57. 0.TO 1568 |
||===================================== |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______ _______
| | | | | | | | | | | | | |
| oo | | | | | | oo | | oo | | oo | | oo |
| 2#12 | | | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 |
| | | | | | | | | | | | | |
| 2#12 | | 2#12 | | 2#12 | | 2#12 | | | | | | |
| oo | | oo | | oo | | oo | | | | | | |
| | | | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 6 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 7
=====================================================================
BEAM NO. 4 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4925. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 821. 4719. NO NO
2 343. 2 - 12MM 0. 1742. YES NO
3 343. 2 - 12MM 3799. 4925. NO YES
B E A M N O. 4 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 4.93 KNS Vc= 50.64 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.08 KNS Vc= 91.66 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 8J____________________ 4925X 200X 400_____________________ 9J____
| |
||========================= =================||
| 2No12 H 343. 0.TO 1742 2No12 H 343.3799.TO 4925 |
| |
| 2No12 H 57. 821.TO 4719 |
| ============================================================= |
| |
|___________________________________________________________________________|
_______ _______ _______ _______ _______ _______ _______
| | | | | | | | | | | | | |
| oo | | oo | | oo | | | | | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 | | | | | | 2#12 | | 2#12 |
| | | | | | | | | | | | | |
| | | | | 2#12 | | 2#12 | | 2#12 | | 2#12 | | |
| | | | | oo | | oo | | oo | | oo | | |
| | | | | | | | | | | | | |
|_______| |_______| |_______| |_______| |_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 7 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 8
=====================================================================
BEAM NO. 5 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 3000. YES YES
2 143. 3 - 12MM 982. 3000. NO YES
B E A M N O. 5 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.01 KNS Vc= 93.51 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.01 KNS Vc= 92.92 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 1J____________________ 3000X 400X 200_____________________ 4J____
| |
| |
| ===================================================||
| 3No12cHc 57. 0.TO 3000No12|H|143. 982.TO|3000 | | | | | |20*12c/c 72| | |
||=========================================================================||
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 8 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 9
=====================================================================
BEAM NO. 6 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 1037. YES NO
2 143. 3 - 12MM 732. 3000. NO YES
B E A M N O. 6 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.18 KNS Vc= 81.60 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.18 KNS Vc= 80.93 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 2J____________________ 3000X 400X 200_____________________ 5J____
| |
| |
| =========================================================||
| 3No12cHc 57. 0.TOo1037|143. 732.TO 3000 20*12c/c 72 |
||========================= |
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | | | |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 9 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 10
=====================================================================
BEAM NO. 7 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 804. 3000. NO YES
2 143. 3 - 12MM 0. 1143. YES NO
B E A M N O. 7 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.22 KNS Vc= 94.07 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.22 KNS Vc= 93.49 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 3J____________________ 3000X 400X 200_____________________ 6J____
| |
| |
||=========================== |
| 3No12cHc143. 0.TO3No12|H| 57. 804.TO 3000 20*12c/c 72 |
| =======================================================||
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| ooo | | | | |
| 3#12 | | 3#12 | | 3#12 |
| | | ooo | | ooo |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 10 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 11
=====================================================================
BEAM NO. 8 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 3000. YES YES
2 143. 3 - 12MM 0. 643. YES NO
3 143. 3 - 12MM 982. 3000. NO YES
B E A M N O. 8 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.05 KNS Vc= 85.44 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.9 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.05 KNS Vc= 84.80 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.9 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 4J____________________ 3000X 400X 200_____________________ 7J____
| |
| |
||=============== ===================================================||
| 3No12cHc157.| |0.TO 3000No12|H|143. 982.TO|3000 | | | | | |20*12c/c 72| | |
||=========================================================================||
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 11 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 12
=====================================================================
BEAM NO. 9 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 1347. YES NO
2 143. 3 - 12MM 982. 3000. NO YES
B E A M N O. 9 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.41 KNS Vc= 79.18 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.41 KNS Vc= 78.48 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 5J____________________ 3000X 400X 200_____________________ 8J____
| |
| |
| ===================================================||
| 3No12cHc 57. 0.TO 1347No12|H|143. 982.TO 3000 20*12c/c 72 |
||================================= |
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | | | |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 12 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 13
=====================================================================
BEAM NO. 10 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 1242. 3000. NO YES
2 143. 3 - 12MM 0. 1643. YES NO
B E A M N O. 10 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.39 KNS Vc= 85.76 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.9 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.39 KNS Vc= 85.12 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.9 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 6J____________________ 3000X 400X 200_____________________ 9J____
| |
| |
||======================================== |
| 3No12cHc143. 0.TO 1643 3No12 H |57.1242.TO 3000 20*12c/c 72 |
| ============================================||
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| ooo | | ooo | | |
| 3#12 | | 3#12 | | 3#12 |
| | | ooo | | ooo |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 13 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 14
=====================================================================
BEAM NO. 11 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3075. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 339. 1839. NO NO
2 343. 2 - 12MM 0. 767. YES NO
3 343. 2 - 12MM 1412. 3075. NO YES
B E A M N O. 11 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 1.64 KNS Vc= 52.31 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.88 KNS Vc= 52.31 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 13J____________________ 3075X 200X 400_____________________ 14J____
| |
||================= =========================================||
| 2No12 H 343. 0.TO 767 2No12 H 343.1412.TO 3075 |
| |
| 2No12 H 57. 339.TO 1839 |
| ====================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 14 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 15
=====================================================================
BEAM NO. 12 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4925. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 762. 4368. NO NO
2 343. 3 - 12MM 0. 1331. YES NO
3 343. 2 - 12MM 3799. 4925. NO YES
B E A M N O. 12 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 30.27 KNS Vc= 51.61 KNS Vs= 0.00 KNS
Tu= 0.10 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 2126. MM
AT END SUPPORT - Vu= 25.60 KNS Vc= 51.61 KNS Vs= 0.00 KNS
Tu= 0.10 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 2126. MM
___ 14J____________________ 4925X 200X 400_____________________ 15J____
| |
||=================== =================||
| 3No12 H 343.| 0.TO 1331 2No12 H 343.3799.TO 4925 |
| 14*12c/c172 | | | | 14*12c/c172 |
| |3No12|H |57. 762.TO 4368 | | | |
| ========================================================= |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| ooo | | | | oo |
| 3#12 | | | | 2#12 |
| | | | | |
| | | 3#12 | | |
| | | ooo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 15 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 16
=====================================================================
BEAM NO. 13 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3075. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 348. 1830. NO NO
2 343. 2 - 12MM 0. 767. YES NO
3 343. 2 - 12MM 1155. 3075. NO YES
B E A M N O. 13 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 1.46 KNS Vc= 91.65 KNS Vs= 0.00 KNS
Tu= 0.09 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.06 KNS Vc= 49.93 KNS Vs= 0.00 KNS
Tu= 0.09 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 16J____________________ 3075X 200X 400_____________________ 17J____
| |
||================= ===============================================||
| 2No12 H 343. 0.TO 767 2No12 H 343.1155.TO 3075 |
| |
| 2No12 H 57. 348.TO 1830 |
| ====================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 16 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 17
=====================================================================
BEAM NO. 14 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4925. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 762. 4779. NO NO
2 343. 3 - 12MM 0. 1331. YES NO
3 343. 2 - 12MM 3799. 4925. NO YES
B E A M N O. 14 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 31.18 KNS Vc= 52.24 KNS Vs= 0.00 KNS
Tu= 0.16 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 2126. MM
AT END SUPPORT - Vu= 24.69 KNS Vc= 60.93 KNS Vs= 0.00 KNS
Tu= 0.16 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 2126. MM
___ 17J____________________ 4925X 200X 400_____________________ 18J____
| |
||=================== =================||
| 3No12 H 343.| 0.TO 1331 2No12 H 343.3799.TO 4925 |
| 14*12c/c172 | | | | 14*12c/c172 |
| |3No12|H |57. 762.TO 4779 | | | | | |
| =============================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| ooo | | | | oo |
| 3#12 | | | | 2#12 |
| | | | | |
| | | 3#12 | | |
| | | ooo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 17 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 18
=====================================================================
BEAM NO. 15 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 1273. YES NO
2 143. 3 - 12MM 982. 3000. NO YES
B E A M N O. 15 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.14 KNS Vc= 81.23 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.14 KNS Vc= 80.55 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 10J____________________ 3000X 400X 200_____________________ 13J____
| |
| |
| ===================================================||
| 3No12cHc 57. 0.TO 1273No12|H|143. 982.TO 3000 20*12c/c 72 |
||=============================== |
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | | | |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 18 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 19
=====================================================================
BEAM NO. 16 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 1062. YES NO
2 143. 3 - 12MM 732. 3000. NO YES
B E A M N O. 16 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.26 KNS Vc= 82.61 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.8 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.26 KNS Vc= 81.94 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.8 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 11J____________________ 3000X 400X 200_____________________ 14J____
| |
| |
| =========================================================||
| 3No12cHc 57. 0.TOo1062|143. 732.TO 3000 20*12c/c 72 |
||========================= |
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | | | |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 19 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 20
=====================================================================
BEAM NO. 17 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 689. 3000. NO YES
2 143. 3 - 12MM 0. 1143. YES NO
B E A M N O. 17 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.37 KNS Vc= 81.73 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.37 KNS Vc= 81.05 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 12J____________________ 3000X 400X 200_____________________ 15J____
| |
| |
||=========================== |
| 3No12cHc143. 03No121H3|57. 689.TO 3000 20*12c/c 72 |
| ==========================================================||
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| ooo | | | | |
| 3#12 | | 3#12 | | 3#12 |
| | | ooo | | ooo |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 20 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 21
=====================================================================
BEAM NO. 18 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 1316. YES NO
2 143. 3 - 12MM 982. 3000. NO YES
B E A M N O. 18 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.30 KNS Vc= 78.97 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.30 KNS Vc= 78.27 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 13J____________________ 3000X 400X 200_____________________ 16J____
| |
| |
| ===================================================||
| 3No12cHc 57. 0.TO 1316No12|H|143. 982.TO 3000 20*12c/c 72 |
||================================ |
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | | | |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 21 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 22
=====================================================================
BEAM NO. 19 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 1456. YES NO
2 143. 3 - 12MM 982. 3000. NO YES
B E A M N O. 19 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.59 KNS Vc= 79.70 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.59 KNS Vc= 79.01 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 14J____________________ 3000X 400X 200_____________________ 17J____
| |
| |
| ===================================================||
| 3No12cHc 57. 0.TO 1456No12|H|143. 982.TO 3000 20*12c/c 72 |
||=================================== |
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | | | |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 22 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 23
=====================================================================
BEAM NO. 20 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 1124. 3000. NO YES
2 143. 3 - 12MM 0. 1643. YES NO
B E A M N O. 20 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.85 KNS Vc= 79.22 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.85 KNS Vc= 45.40 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 15J____________________ 3000X 400X 200_____________________ 18J____
| |
| |
||======================================== |
| 3No12cHc143. 0.TO 1643 |3No12|H| 57.1124.TO 3000 20*12c/c 72 |
| ===============================================||
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| ooo | | ooo | | |
| 3#12 | | 3#12 | | 3#12 |
| | | ooo | | ooo |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 23 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 24
=====================================================================
BEAM NO. 21 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3075. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 345. 1834. NO NO
2 343. 2 - 12MM 0. 767. YES NO
3 343. 2 - 12MM 1155. 3075. NO YES
B E A M N O. 21 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 1.64 KNS Vc= 52.31 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.88 KNS Vc= 52.31 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 22J____________________ 3075X 200X 400_____________________ 23J____
| |
||================= ===============================================||
| 2No12 H 343. 0.TO 767 2No12 H 343.1155.TO 3075 |
| |
| 2No12 H 57. 345.TO 1834 |
| ====================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 24 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 25
=====================================================================
BEAM NO. 22 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4925. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 762. 4368. NO NO
2 343. 3 - 12MM 0. 1331. YES NO
3 343. 2 - 12MM 3799. 4925. NO YES
B E A M N O. 22 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 32.19 KNS Vc= 51.55 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 2126. MM
AT END SUPPORT - Vu= 27.27 KNS Vc= 51.55 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 2126. MM
___ 23J____________________ 4925X 200X 400_____________________ 24J____
| |
||=================== =================||
| 3No12 H 343.| 0.TO 1331 2No12 H 343.3799.TO 4925 |
| 14*12c/c172 | | | | 14*12c/c172 |
| |3No12|H |57. 762.TO 4368 | | | |
| ========================================================= |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| ooo | | | | oo |
| 3#12 | | | | 2#12 |
| | | | | |
| | | 3#12 | | |
| | | ooo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 25 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 26
=====================================================================
BEAM NO. 23 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3075. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 355. 1824. NO NO
2 343. 2 - 12MM 0. 767. YES NO
3 343. 3 - 12MM 1155. 3075. NO YES
B E A M N O. 23 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 1.46 KNS Vc= 91.65 KNS Vs= 0.00 KNS
Tu= 0.06 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.07 KNS Vc= 49.89 KNS Vs= 0.00 KNS
Tu= 0.06 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 25J____________________ 3075X 200X 400_____________________ 26J____
| |
||================= ===============================================||
| 2No12 H 343. 0.TO 767 3No12 H 343.1155.TO 3075 |
| |
| 2No12 H 57. 355.TO 1824 |
| ====================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | ooo | | ooo |
| 2#12 | | 3#12 | | 3#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 26 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 27
=====================================================================
BEAM NO. 24 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4925. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 762. 4779. NO NO
2 343. 3 - 12MM 0. 1331. YES NO
3 343. 2 - 12MM 3799. 4925. NO YES
B E A M N O. 24 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 33.17 KNS Vc= 52.25 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 2126. MM
AT END SUPPORT - Vu= 26.30 KNS Vc= 60.96 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 2126. MM
___ 26J____________________ 4925X 200X 400_____________________ 27J____
| |
||=================== =================||
| 3No12 H 343.| 0.TO 1331 2No12 H 343.3799.TO 4925 |
| 14*12c/c172 | | | | 14*12c/c172 |
| |3No12|H |57. 762.TO 4779 | | | | | |
| =============================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| ooo | | | | oo |
| 3#12 | | | | 2#12 |
| | | | | |
| | | 3#12 | | |
| | | ooo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 27 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 28
=====================================================================
BEAM NO. 25 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 1273. YES NO
2 143. 3 - 12MM 982. 3000. NO YES
B E A M N O. 25 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.14 KNS Vc= 81.34 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.14 KNS Vc= 80.67 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 19J____________________ 3000X 400X 200_____________________ 22J____
| |
| |
| ===================================================||
| 3No12cHc 57. 0.TO 1273No12|H|143. 982.TO 3000 20*12c/c 72 |
||=============================== |
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | | | |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 28 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 29
=====================================================================
BEAM NO. 26 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 1069. YES NO
2 143. 3 - 12MM 732. 3000. NO YES
B E A M N O. 26 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.26 KNS Vc= 82.90 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.8 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.26 KNS Vc= 82.24 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.8 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 20J____________________ 3000X 400X 200_____________________ 23J____
| |
| |
| =========================================================||
| 3No12cHc 57. 0.TOo1069|143. 732.TO 3000 20*12c/c 72 |
||========================== |
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | | | |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 29 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 30
=====================================================================
BEAM NO. 27 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 675. 3000. NO YES
2 143. 3 - 12MM 0. 1143. YES NO
B E A M N O. 27 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.37 KNS Vc= 81.85 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.37 KNS Vc= 81.18 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 21J____________________ 3000X 400X 200_____________________ 24J____
| |
| |
||=========================== |
| 3No12cHc143. 03No121H3|57. 675.TO 3000 20*12c/c 72 |
| ==========================================================||
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| ooo | | | | |
| 3#12 | | 3#12 | | 3#12 |
| | | ooo | | ooo |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 30 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 31
=====================================================================
BEAM NO. 28 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 1319. YES NO
2 143. 3 - 12MM 982. 3000. NO YES
B E A M N O. 28 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.31 KNS Vc= 79.02 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.31 KNS Vc= 78.32 KNS Vs= 0.00 KNS
Tu= 0.01 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 22J____________________ 3000X 400X 200_____________________ 25J____
| |
| |
| ===================================================||
| 3No12cHc 57. 0.TO 1319No12|H|143. 982.TO 3000 20*12c/c 72 |
||================================ |
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | | | |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 31 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 32
=====================================================================
BEAM NO. 29 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 1470. YES NO
2 143. 3 - 12MM 982. 3000. NO YES
B E A M N O. 29 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.59 KNS Vc= 79.86 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.59 KNS Vc= 79.17 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 23J____________________ 3000X 400X 200_____________________ 26J____
| |
| |
| ===================================================||
| 3No12cHc 57. 0.TO 1470No12|H|143. 982.TO 3000 20*12c/c 72 |
||==================================== |
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | | | |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 32 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 33
=====================================================================
BEAM NO. 30 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 1105. 3000. NO YES
2 143. 3 - 12MM 0. 1643. YES NO
B E A M N O. 30 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.87 KNS Vc= 79.28 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.87 KNS Vc= 46.34 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 24J____________________ 3000X 400X 200_____________________ 27J____
| |
| |
||======================================== |
| 3No12cHc143. 0.TO 1643 3No12 H |57.1105.TO 3000 20*12c/c 72 |
| ================================================||
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| ooo | | ooo | | |
| 3#12 | | 3#12 | | 3#12 |
| | | ooo | | ooo |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 33 of 86
Sunday, March 22, 2020, 06:13 PM
STAAD SPACE -- PAGE NO. 34
=====================================================================
BEAM NO. 31 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3075. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 0. 1818. YES NO
2 343. 2 - 12MM 0. 767. YES NO
3 343. 2 - 12MM 1155. 3075. NO YES
B E A M N O. 31 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.71 KNS Vc= 49.79 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.82 KNS Vc= 49.84 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 31J____________________ 3075X 200X 400_____________________ 32J____
| |
||================= ===============================================||
| 2No12 H 343. 0.TO 767 2No12 H 343.1155.TO 3075 |
| |
| 2No12 H 57. 0.TO 1818 |
||=========================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 |
| | | | | |
| 2#12 | | 2#12 | | |
| oo | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 34 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 35
=====================================================================
BEAM NO. 32 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4925. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 803. 4327. NO NO
2 343. 2 - 12MM 0. 1331. YES NO
3 343. 2 - 12MM 3799. 4925. NO YES
B E A M N O. 32 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 4.72 KNS Vc= 52.31 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.29 KNS Vc= 52.31 KNS Vs= 0.00 KNS
Tu= 0.02 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 32J____________________ 4925X 200X 400_____________________ 33J____
| |
||=================== =================||
| 2No12 H 343. 0.TO 1331 2No12 H 343.3799.TO 4925 |
| |
| 2No12 H 57. 803.TO 4327 |
| ======================================================= |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | | | oo |
| 2#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 35 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 36
=====================================================================
BEAM NO. 33 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3075. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 0. 1562. YES NO
2 343. 2 - 12MM 0. 510. YES NO
3 343. 2 - 12MM 1155. 3075. NO YES
B E A M N O. 33 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.36 KNS Vc= 52.33 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.16 KNS Vc= 52.33 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 34J____________________ 3075X 200X 400_____________________ 35J____
| |
||=========== ===============================================||
| 2No12 H 343. 0.TO 510 2No12 H 343.1155.TO 3075 |
| |
| 2No12 H 57. 0.TO 1562 |
||===================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 |
| | | | | |
| 2#12 | | 2#12 | | |
| oo | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 36 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 37
=====================================================================
BEAM NO. 34 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4925. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 784. 4757. NO NO
2 343. 2 - 12MM 0. 1742. YES NO
3 343. 2 - 12MM 3799. 4925. NO YES
B E A M N O. 34 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 4.91 KNS Vc= 50.80 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.11 KNS Vc= 91.65 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 35J____________________ 4925X 200X 400_____________________ 36J____
| |
||========================= =================||
| 2No12 H 343. 0.TO 1742 2No12 H 343.3799.TO 4925 |
| |
| 2No12 H 57. 784.TO 4757 |
| ============================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | | | oo |
| 2#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 37 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 38
=====================================================================
BEAM NO. 35 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 3000. YES YES
2 143. 3 - 12MM 982. 3000. NO YES
B E A M N O. 35 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.00 KNS Vc= 93.87 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.00 KNS Vc= 93.28 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 28J____________________ 3000X 400X 200_____________________ 31J____
| |
| |
| ===================================================||
| 3No12cHc 57. 0.TO 3000No12|H|143. 982.TO|3000 | | | | | |20*12c/c 72| | |
||=========================================================================||
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 38 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 39
=====================================================================
BEAM NO. 36 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 1042. YES NO
2 143. 3 - 12MM 732. 3000. NO YES
B E A M N O. 36 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.18 KNS Vc= 81.85 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.18 KNS Vc= 81.18 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.7 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 29J____________________ 3000X 400X 200_____________________ 32J____
| |
| |
| =========================================================||
| 3No12cHc 57. 0.TOo1042|143. 732.TO 3000 20*12c/c 72 |
||========================= |
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | | | |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 39 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 40
=====================================================================
BEAM NO. 37 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 793. 3000. NO YES
2 143. 3 - 12MM 0. 1143. YES NO
B E A M N O. 37 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.21 KNS Vc= 94.42 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.21 KNS Vc= 93.84 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 2.2 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 30J____________________ 3000X 400X 200_____________________ 33J____
| |
| |
||=========================== |
| 3No12cHc143. 0.TO3No12|H| 57. 793.TO 3000 20*12c/c 72 |
| =======================================================||
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| ooo | | | | |
| 3#12 | | 3#12 | | 3#12 |
| | | ooo | | ooo |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 40 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 41
=====================================================================
BEAM NO. 38 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 3000. YES YES
2 143. 3 - 12MM 0. 893. YES NO
3 143. 3 - 12MM 982. 3000. NO YES
B E A M N O. 38 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.08 KNS Vc= 85.65 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.9 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.08 KNS Vc= 85.00 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.9 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 31J____________________ 3000X 400X 200_____________________ 34J____
| |
| |
||===================== ===================================================||
| 3No12cHc157.| |0.TO 3000No12|H|143. 982.TO|3000 | | | | | |20*12c/c 72| | |
||=========================================================================||
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| ooo | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | ooo | | ooo |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 41 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 42
=====================================================================
BEAM NO. 39 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 0. 1363. YES NO
2 143. 3 - 12MM 982. 3000. NO YES
B E A M N O. 39 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.40 KNS Vc= 79.31 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.40 KNS Vc= 78.61 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 32J____________________ 3000X 400X 200_____________________ 35J____
| |
| |
| ===================================================||
| 3No12cHc 57. 0.TO 1363No12|H|143. 982.TO 3000 20*12c/c 72 |
||================================= |
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| | | ooo | | ooo |
| 3#12 | | 3#12 | | 3#12 |
| ooo | | | | |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 42 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 43
=====================================================================
BEAM NO. 40 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3000. MM FY - 415. FC - 21. MPA, SIZE - 400. X 200. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 3 - 12MM 1224. 3000. NO YES
2 143. 3 - 12MM 0. 1893. YES NO
B E A M N O. 40 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.36 KNS Vc= 85.96 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.9 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
AT END SUPPORT - Vu= 0.36 KNS Vc= 85.32 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.9 KN-MET Ts= 0.0 KN-MET LOAD 1
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 72. MM C/C FOR 1364. MM
___ 33J____________________ 3000X 400X 200_____________________ 36J____
| |
| |
||============================================== |
| 3No12cHc143. 0.TO 1893 3No12 H |57.1224.TO 3000 20*12c/c 72 |
| ============================================||
| |
| |
|___________________________________________________________________________|
_______________________ _______________________ _______________________
| | | | | |
| | | | | |
| ooo | | ooo | | |
| 3#12 | | 3#12 | | 3#12 |
| | | ooo | | ooo |
| | | | | |
| | | | | |
|_______________________| |_______________________| |_______________________|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 43 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 44
=====================================================================
BEAM NO. 41 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3200. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 0. 2175. YES NO
2 343. 2 - 12MM 0. 1044. YES NO
3 343. 2 - 12MM 1490. 3200. NO YES
B E A M N O. 41 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 1.06 KNS Vc= 49.89 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.70 KNS Vc= 49.95 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 4J____________________ 3200X 200X 400_____________________ 13J____
| |
||======================= ========================================||
| 2No12 H 343. 0.TO 1044 2No12 H 343.1490.TO 3200 |
| |
| 2No12 H 57. 0.TO 2175 |
||================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 |
| | | | | |
| 2#12 | | 2#12 | | |
| oo | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 44 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 45
=====================================================================
BEAM NO. 42 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3200. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 588. 2212. NO NO
2 343. 2 - 12MM 0. 1044. YES NO
3 343. 2 - 12MM 1756. 3200. NO YES
B E A M N O. 42 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 2.16 KNS Vc= 52.29 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.61 KNS Vc= 52.29 KNS Vs= 0.00 KNS
Tu= 0.04 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 5J____________________ 3200X 200X 400_____________________ 14J____
| |
||======================= ==================================||
| 2No12 H 343. 0.TO 1044 2No12 H 343.1756.TO 3200 |
| |
| 2No12 H 57. 588.TO 2212 |
| ======================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | | | oo |
| 2#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 45 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 46
=====================================================================
BEAM NO. 43 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3200. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 0. 2169. YES NO
2 343. 2 - 12MM 0. 1044. YES NO
3 343. 2 - 12MM 1490. 3200. NO YES
B E A M N O. 43 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 1.12 KNS Vc= 49.90 KNS Vs= 0.00 KNS
Tu= 0.08 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.64 KNS Vc= 49.92 KNS Vs= 0.00 KNS
Tu= 0.08 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 6J____________________ 3200X 200X 400_____________________ 15J____
| |
||======================= ========================================||
| 2No12 H 343. 0.TO 1044 2No12 H 343.1490.TO 3200 |
| |
| 2No12 H 57. 0.TO 2169 |
||================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 |
| | | | | |
| 2#12 | | 2#12 | | |
| oo | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 46 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 47
=====================================================================
BEAM NO. 44 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3200. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 0. 2179. YES NO
2 343. 2 - 12MM 0. 777. YES NO
3 343. 2 - 12MM 1490. 3200. NO YES
B E A M N O. 44 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.76 KNS Vc= 52.30 KNS Vs= 0.00 KNS
Tu= 0.14 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.00 KNS Vc= 52.30 KNS Vs= 0.00 KNS
Tu= 0.14 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 7J____________________ 3200X 200X 400_____________________ 16J____
| |
||================= ========================================||
| 2No12 H 343. 0.TO 777 2No12 H 343.1490.TO 3200 |
| |
| 2No12 H 57. 0.TO 2179 |
||================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 |
| | | | | |
| 2#12 | | 2#12 | | |
| oo | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 47 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 48
=====================================================================
BEAM NO. 45 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3200. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 324. 2209. NO NO
2 343. 2 - 12MM 0. 1044. YES NO
3 343. 2 - 12MM 1756. 3200. NO YES
B E A M N O. 45 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 1.99 KNS Vc= 52.36 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.77 KNS Vc= 50.33 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 8J____________________ 3200X 200X 400_____________________ 17J____
| |
||======================= ==================================||
| 2No12 H 343. 0.TO 1044 2No12 H 343.1756.TO 3200 |
| |
| 2No12 H 57. 324.TO 2209 |
| ============================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | | | oo |
| 2#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 48 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 49
=====================================================================
BEAM NO. 46 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 3200. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 0. 1897. YES NO
2 343. 2 - 12MM 0. 1044. YES NO
3 343. 2 - 12MM 1490. 3200. NO YES
B E A M N O. 46 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 0.90 KNS Vc= 52.28 KNS Vs= 0.00 KNS
Tu= 0.16 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 3.87 KNS Vc= 52.28 KNS Vs= 0.00 KNS
Tu= 0.16 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 9J____________________ 3200X 200X 400_____________________ 18J____
| |
||======================= ========================================||
| 2No12 H 343. 0.TO 1044 2No12 H 343.1490.TO 3200 |
| |
| 2No12 H 57. 0.TO 1897 |
||============================================ |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | oo | | oo |
| 2#12 | | 2#12 | | 2#12 |
| | | | | |
| 2#12 | | 2#12 | | |
| oo | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 49 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 50
=====================================================================
BEAM NO. 47 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 5000. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 895. 3897. NO NO
2 343. 2 - 12MM 0. 1344. YES NO
3 343. 2 - 12MM 3448. 5000. NO YES
B E A M N O. 47 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 4.11 KNS Vc= 50.55 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.05 KNS Vc= 50.58 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 13J____________________ 5000X 200X 400_____________________ 22J____
| |
||=================== =======================||
| 2No12 H 343. 0.TO 1344 2No12 H 343.3448.TO 5000 |
| |
| 2No12 H 57. 895.TO 3897 |
| =============================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | | | oo |
| 2#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 50 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 51
=====================================================================
BEAM NO. 48 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 5000. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 699. 4093. NO NO
2 343. 3 - 12MM 0. 1344. YES NO
3 343. 3 - 12MM 3448. 5000. NO YES
B E A M N O. 48 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 28.09 KNS Vc= 51.24 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 2164. MM
AT END SUPPORT - Vu= 28.79 KNS Vc= 51.24 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 2164. MM
___ 14J____________________ 5000X 200X 400_____________________ 23J____
| |
||=================== =======================||
| 3No12 H 343.| 0.TO 1344 3No12|H 343.3448.TO 5000 |
| 14*12c/c172 | | | | | | 14*12c/c172 |
| 2No12 H 57. 699.TO 4093 | | | | |
| ===================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| ooo | | | | ooo |
| 3#12 | | | | 3#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 51 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 52
=====================================================================
BEAM NO. 49 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 5000. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 850. 3942. NO NO
2 343. 2 - 12MM 0. 1344. YES NO
3 343. 2 - 12MM 3448. 5000. NO YES
B E A M N O. 49 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 4.11 KNS Vc= 50.80 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.05 KNS Vc= 50.84 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 15J____________________ 5000X 200X 400_____________________ 24J____
| |
||=================== =======================||
| 2No12 H 343. 0.TO 1344 2No12 H 343.3448.TO 5000 |
| |
| 2No12 H 57. 850.TO 3942 |
| ================================================ |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | | | oo |
| 2#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 52 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 53
=====================================================================
BEAM NO. 50 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 5000. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 890. 3902. NO NO
2 343. 2 - 12MM 0. 1344. YES NO
3 343. 2 - 12MM 3448. 5000. NO YES
B E A M N O. 50 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 4.10 KNS Vc= 52.32 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.06 KNS Vc= 52.32 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 16J____________________ 5000X 200X 400_____________________ 25J____
| |
||=================== =======================||
| 2No12 H 343. 0.TO 1344 2No12 H 343.3448.TO 5000 |
| |
| 2No12 H 57. 890.TO 3902 |
| =============================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | | | oo |
| 2#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 53 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 54
=====================================================================
BEAM NO. 51 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 5000. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 685. 4106. NO NO
2 343. 3 - 12MM 0. 1344. YES NO
3 343. 3 - 12MM 3448. 5000. NO YES
B E A M N O. 51 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 27.81 KNS Vc= 51.96 KNS Vs= 0.00 KNS
Tu= 0.08 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 2164. MM
AT END SUPPORT - Vu= 29.07 KNS Vc= 51.71 KNS Vs= 0.00 KNS
Tu= 0.08 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 2164. MM
___ 17J____________________ 5000X 200X 400_____________________ 26J____
| |
||=================== =======================||
| 3No12 H 343.| 0.TO 1344 3No12|H 343.3448.TO 5000 |
| 14*12c/c172 | | | | | | 14*12c/c172 |
| 2No12 H 57. 685.TO 4106 | | | | |
| ===================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| ooo | | | | ooo |
| 3#12 | | | | 3#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 54 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 55
=====================================================================
BEAM NO. 52 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 5000. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 841. 3951. NO NO
2 343. 2 - 12MM 0. 1344. YES NO
3 343. 2 - 12MM 3448. 5000. NO YES
B E A M N O. 52 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 4.10 KNS Vc= 52.30 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 4.06 KNS Vc= 52.30 KNS Vs= 0.00 KNS
Tu= 0.00 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 18J____________________ 5000X 200X 400_____________________ 27J____
| |
||=================== =======================||
| 2No12 H 343. 0.TO 1344 2No12 H 343.3448.TO 5000 |
| |
| 2No12 H 57. 841.TO 3951 |
| ================================================= |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | | | oo |
| 2#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 55 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 56
=====================================================================
BEAM NO. 53 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4300. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 792. 3687. NO NO
2 343. 2 - 12MM 0. 1585. YES NO
3 343. 2 - 12MM 2894. 4300. NO YES
B E A M N O. 53 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 4.23 KNS Vc= 52.30 KNS Vs= 0.00 KNS
Tu= 0.06 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.61 KNS Vc= 52.30 KNS Vs= 0.00 KNS
Tu= 0.06 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 22J____________________ 4299X 200X 400_____________________ 31J____
| |
||=========================== ========================||
| 2No12 H 343. 0.TO 1585 2No12 H 343.2894.TO 4300 |
| |
| 2No12 H 57. 792.TO 3687 |
| ==================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | | | oo |
| 2#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 56 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 57
=====================================================================
BEAM NO. 54 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4300. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 674. 3805. NO NO
2 343. 3 - 12MM 0. 1227. YES NO
3 343. 2 - 12MM 2894. 4300. NO YES
B E A M N O. 54 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 23.13 KNS Vc= 51.53 KNS Vs= 0.00 KNS
Tu= 0.38 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 1813. MM
AT END SUPPORT - Vu= 20.19 KNS Vc= 51.53 KNS Vs= 0.00 KNS
Tu= 0.38 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 1813. MM
___ 23J____________________ 4299X 200X 400_____________________ 32J____
| |
||==================== ========================||
| 3No12 H 343.| 0.TO 1227 2No12 H|343.2894.TO 4300 |
| 12*12c/c172 | | | | 12*12c/c172 |
| 2No12 H 57. 674.TO 3805 | | | | |
| ========================================================= |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| ooo | | | | oo |
| 3#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 57 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 58
=====================================================================
BEAM NO. 55 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4300. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 780. 3699. NO NO
2 343. 2 - 12MM 0. 1585. YES NO
3 343. 2 - 12MM 2894. 4300. NO YES
B E A M N O. 55 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 4.19 KNS Vc= 52.32 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.64 KNS Vc= 52.32 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 24J____________________ 4299X 200X 400_____________________ 33J____
| |
||=========================== ========================||
| 2No12 H 343. 0.TO 1585 2No12 H 343.2894.TO 4300 |
| |
| 2No12 H 57. 780.TO 3699 |
| ===================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | | | oo |
| 2#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 58 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 59
=====================================================================
BEAM NO. 56 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4300. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 784. 4053. NO NO
2 343. 2 - 12MM 0. 1585. YES NO
3 343. 2 - 12MM 3252. 4300. NO YES
B E A M N O. 56 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 4.44 KNS Vc= 50.25 KNS Vs= 0.00 KNS
Tu= 0.11 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.40 KNS Vc= 52.14 KNS Vs= 0.00 KNS
Tu= 0.11 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 25J____________________ 4299X 200X 400_____________________ 34J____
| |
||=========================== ==================||
| 2No12 H 343. 0.TO 1585 2No12 H 343.3252.TO 4300 |
| |
| 2No12 H 57. 784.TO 4053 |
| =========================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | | | oo |
| 2#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 59 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 60
=====================================================================
BEAM NO. 57 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4300. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 663. 3817. NO NO
2 343. 3 - 12MM 0. 1227. YES NO
3 343. 2 - 12MM 3252. 4300. NO YES
B E A M N O. 57 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 24.32 KNS Vc= 51.03 KNS Vs= 0.00 KNS
Tu= 0.51 KN-MET Tc= 1.6 KN-MET Ts= 0.0 KN-MET LOAD 2
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 172. MM C/C FOR 1813. MM
AT END SUPPORT - Vu= 3.01 KNS Vc= 54.32 KNS Vs= 0.00 KNS
Tu= 0.06 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 26J____________________ 4299X 200X 400_____________________ 35J____
| |
||==================== ==================||
| 3No12 H 343.| 0.TO 1227 2No12 H 343.3252.TO 4300 |
| 12*12c/c172 | | |
| 2No12 H 57. 663.TO 3817 |
| ========================================================= |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| ooo | | | | oo |
| 3#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 60 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 61
=====================================================================
BEAM NO. 58 DESIGN RESULTS - FLEXURE PER CODE ACI 318-08
LEN - 4300. MM FY - 415. FC - 21. MPA, SIZE - 200. X 400. MMS
LEVEL HEIGHT BAR INFO FROM TO ANCHOR
(MM) (MM) (MM) STA END
_____________________________________________________________________
1 57. 2 - 12MM 1136. 4060. NO NO
2 343. 2 - 12MM 0. 1585. YES NO
3 343. 2 - 12MM 2894. 4300. NO YES
B E A M N O. 58 D E S I G N R E S U L T S - SHEAR
AT START SUPPORT - Vu= 4.35 KNS Vc= 50.28 KNS Vs= 0.00 KNS
Tu= 0.13 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 2.48 KNS Vc= 56.36 KNS Vs= 0.00 KNS
Tu= 0.13 KN-MET Tc= 1.5 KN-MET Ts= 0.0 KN-MET LOAD 1
STIRRUPS ARE NOT REQUIRED.
___ 27J____________________ 4299X 200X 400_____________________ 36J____
| |
||=========================== ========================||
| 2No12 H 343. 0.TO 1585 2No12 H 343.2894.TO 4300 |
| |
| 2No12 H 57.1136.TO 4060 |
| ==================================================== |
| |
|___________________________________________________________________________|
_______ _______ _______
| | | | | |
| oo | | | | oo |
| 2#12 | | | | 2#12 |
| | | | | |
| | | 2#12 | | |
| | | oo | | |
| | | | | |
|_______| |_______| |_______|
********************END OF BEAM DESIGN**************************
57. DESIGN COLUMN 1 TO 58
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 61 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 62
====================================================================
COLUMN NO. 1 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 2 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 3 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 62 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 63
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 4 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 5 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 6 DESIGN PER ACI 318-08 - AXIAL + BENDING
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 63 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 64
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 7 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 8 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 64 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 65
====================================================================
COLUMN NO. 9 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 10 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 11 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 65 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 66
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 12 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 13 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 14 DESIGN PER ACI 318-08 - AXIAL + BENDING
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 66 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 67
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 15 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 16 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 67 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 68
====================================================================
COLUMN NO. 17 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 18 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 19 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 68 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 69
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 20 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 21 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 22 DESIGN PER ACI 318-08 - AXIAL + BENDING
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 69 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 70
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 23 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 24 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 70 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 71
====================================================================
COLUMN NO. 25 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 26 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 27 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 71 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 72
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 28 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 29 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 30 DESIGN PER ACI 318-08 - AXIAL + BENDING
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 72 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 73
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 31 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 32 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 73 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 74
====================================================================
COLUMN NO. 33 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 34 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 35 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 74 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 75
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 36 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 37 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 38 DESIGN PER ACI 318-08 - AXIAL + BENDING
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 75 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 76
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 39 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 40 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 400.0 X 200.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 76 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 77
====================================================================
COLUMN NO. 41 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 42 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 43 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 77 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 78
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 44 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 45 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 46 DESIGN PER ACI 318-08 - AXIAL + BENDING
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 78 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 79
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 47 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 48 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 79 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 80
====================================================================
COLUMN NO. 49 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 50 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 51 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 80 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 81
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 52 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 53 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 54 DESIGN PER ACI 318-08 - AXIAL + BENDING
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 81 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 82
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 55 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.900
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 56 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 82 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 83
====================================================================
COLUMN NO. 57 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
====================================================================
COLUMN NO. 58 DESIGN PER ACI 318-08 - AXIAL + BENDING
FY - 415.0 FC - 21.0 MPA, RECT SIZE - 200.0 X 400.0 MMS, TIED
ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 800.0 SQ. MM
BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI
----------------------------------------------------------
4 - 16 MM 1.005 1 END 0.650
(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 12 SPACING 200.00 MM
********************END OF COLUMN DESIGN RESULTS********************
58. CONCRETE TAKE
59. CLB 0.02 MEMB 59 60
60. CLS 0.02 ALL
61. CLT 0.02 MEMB 59 60
62. FC 21000 MEMB 59 60
63. FYMAIN 415000 MEMB 59 60
64. DESIGN ELEMENT 59 60
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 83 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 84
ELEMENT DESIGN SUMMARY
----------------------
ELEMENT LONG. REINF MOM-X /LOAD TRANS. REINF MOM-Y /LOAD
(SQ.MM/MM) (KN-MM/MM) (SQ.MM/MM) (KN-MM/MM)
FY: 414.997 MPA FC: 21.000 MPA COVER (TOP): 20.000 MM
COVER (BOTTOM): 20.000 MM TH: 100.000 MM
59 TOP : Longitudinal direction - Only minimum steel required.
59 BOTT: Longitudinal direction - Only minimum steel required.
59 TOP : Transverse direction - Only minimum steel required.
59 BOTT: Transverse direction - Only minimum steel required.
59 TOP : 0.179 0.11 / 2 0.179 0.04 / 2
BOTT: 0.179 0.00 / 0 0.179 0.00 / 0
FY: 414.997 MPA FC: 21.000 MPA COVER (TOP): 20.000 MM
COVER (BOTTOM): 20.000 MM TH: 100.000 MM
60 TOP : Longitudinal direction - Only minimum steel required.
60 BOTT: Longitudinal direction - Only minimum steel required.
60 TOP : Transverse direction - Only minimum steel required.
60 BOTT: Transverse direction - Only minimum steel required.
60 TOP : 0.179 0.15 / 2 0.179 0.06 / 2
BOTT: 0.179 0.00 / 0 0.179 0.00 / 1
***************************END OF ELEMENT DESIGN***************************
65. END CONCRETE DESIGN
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 84 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 85
************** CONCRETE TAKE OFF **************
(FOR BEAMS, COLUMNS AND PLATES DESIGNED ABOVE)
NOTE: CONCRETE QUANTITY REPRESENTS VOLUME OF CONCRETE IN BEAMS, COLUMNS, AND PLATES DESIGNED ABOVE.
REINFORCING STEEL QUANTITY REPRESENTS REINFORCING STEEL IN BEAMS AND COLUMNS DESIGNED ABOVE.
REINFORCING STEEL IN PLATES IS NOT INCLUDED IN THE REPORTED QUANTITY.
TOTAL VOLUME OF CONCRETE = 53.8 CU.METER
BAR SIZE WEIGHT
NUMBER (in lbs)
-------- --------
12 4027
16 2931
------------
*** TOTAL= 6957
66. PERFORM ANALYSIS
67. FINISH
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 85 of 86
Sunday, March 22, 2020, 06:14 PM
STAAD SPACE -- PAGE NO. 86
*********** END OF THE STAAD.Pro RUN ***********
**** DATE= MAR 22,2020 TIME= 17:57:35 ****
************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://selectservices.bentley.com/en-US/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright © 1997-2013 Bentley Systems, Inc.
* http://www.bentley.com *
************************************************************
C:\SProV8i SS5\STAAD\Sections\RC Final.anl Page 86 of 86
You might also like
- Tuesday, March 09, 2021, 08:48 AM: Warning - All Degrees of Freedom FixedNo ratings yetTuesday, March 09, 2021, 08:48 AM: Warning - All Degrees of Freedom Fixed5 pages
- 2020-09-01 Genard Residential STAAD Output (Frame) 1.0.0No ratings yet2020-09-01 Genard Residential STAAD Output (Frame) 1.0.0108 pages
- Design Calculation For Ae Office at NawadaNo ratings yetDesign Calculation For Ae Office at Nawada164 pages
- STAAD - Pro Report BM 12: Job InformationNo ratings yetSTAAD - Pro Report BM 12: Job Information8 pages
- P01P0054-SS-PSA 01 - HP Small Horizontal Saddle Support Report (Staad Output)No ratings yetP01P0054-SS-PSA 01 - HP Small Horizontal Saddle Support Report (Staad Output)37 pages
- Wednesday, August 25, 2010, 11:55 AM: Page 1 of 8 E:/ravi/Structure1.anlNo ratings yetWednesday, August 25, 2010, 11:55 AM: Page 1 of 8 E:/ravi/Structure1.anl8 pages
- Thursday, October 24, 2024, 09:16 PM: Page 1 of 136 D:/STRUCTURE/Structure1.anlNo ratings yetThursday, October 24, 2024, 09:16 PM: Page 1 of 136 D:/STRUCTURE/Structure1.anl136 pages
- 25m X 60m Analyze Report Is800-2007 LSDNo ratings yet25m X 60m Analyze Report Is800-2007 LSD62 pages
- C:/Users/ARNOLD/Desktop/mr and Mrs Castillo/staad/mr and Mrs Castillo - AnlNo ratings yetC:/Users/ARNOLD/Desktop/mr and Mrs Castillo/staad/mr and Mrs Castillo - Anl10 pages
- C:/Users/ARNOLD/Desktop/acaardio Dela Cruz/staad/structure1.anlNo ratings yetC:/Users/ARNOLD/Desktop/acaardio Dela Cruz/staad/structure1.anl44 pages
- Monday, August 19, 2019, 01:29 AM: Page 1 of 9 C:/Users/ECO CIVIL/Desktop/FINAL/SBR CHK/3.Actuator Frame - Anl0% (1)Monday, August 19, 2019, 01:29 AM: Page 1 of 9 C:/Users/ECO CIVIL/Desktop/FINAL/SBR CHK/3.Actuator Frame - Anl9 pages
- Proposed Renovation of 2 Storey ResidentialNo ratings yetProposed Renovation of 2 Storey Residential32 pages
- Platform Design Calculation - Rev B - 21!03!18No ratings yetPlatform Design Calculation - Rev B - 21!03!1810 pages
- STAAD RESULTS BLDG1_053c3654-ed63-441e-973d-35c945b3b324No ratings yetSTAAD RESULTS BLDG1_053c3654-ed63-441e-973d-35c945b3b32412 pages
- The Ultimate Guide To Auto Cad 2022 3D Modeling For 3d Drawing And ModelingFrom EverandThe Ultimate Guide To Auto Cad 2022 3D Modeling For 3d Drawing And ModelingNo ratings yet
- ACSEE Physics F5 T2 S4 SimpleHarmonicMotionNo ratings yetACSEE Physics F5 T2 S4 SimpleHarmonicMotion3 pages
- Application of Fluid Dynamics in SportsNo ratings yetApplication of Fluid Dynamics in Sports13 pages
- Optimization of One Step Block Method With Three Hybrid Points For Solving First-Order Ordinary Differential EquationsNo ratings yetOptimization of One Step Block Method With Three Hybrid Points For Solving First-Order Ordinary Differential Equations6 pages
- Heating With Coils and Jackets-Spirax SarcoNo ratings yetHeating With Coils and Jackets-Spirax Sarco11 pages
- Ac Axial Fan FP-108-1: FP-108-1 Weight: Bearing System: Impeller: HousingNo ratings yetAc Axial Fan FP-108-1: FP-108-1 Weight: Bearing System: Impeller: Housing1 page
- The Inclination and Shape Factors For The Bearing Capacity of FootingsNo ratings yetThe Inclination and Shape Factors For The Bearing Capacity of Footings8 pages
- Determination of Azimuth and Latitude From Observations of A Single Unknown Star by A New MethodNo ratings yetDetermination of Azimuth and Latitude From Observations of A Single Unknown Star by A New Method9 pages
- Allele Biotech. v. Regeneron - Complaint (Sans Exhibits)No ratings yetAllele Biotech. v. Regeneron - Complaint (Sans Exhibits)13 pages
- MIF Year 11: 8 - Introduction To Calculus (Adv)No ratings yetMIF Year 11: 8 - Introduction To Calculus (Adv)8 pages
- Parametric Analysis On Shell and Tube Heat Exchanger: Mr. P. Amit KumarNo ratings yetParametric Analysis On Shell and Tube Heat Exchanger: Mr. P. Amit Kumar26 pages
- Instrument Panel Layout: Electrical System G3516B Generator SetNo ratings yetInstrument Panel Layout: Electrical System G3516B Generator Set4 pages
- Balanced and Unbalanced Forces: Learning Task No. 1: Identify The Situation If It Shows Balance or Unbalanced Force100% (1)Balanced and Unbalanced Forces: Learning Task No. 1: Identify The Situation If It Shows Balance or Unbalanced Force4 pages
