Performances - Maxroy B105
Dosing pump m-Roy Series – A, B, H & P
● Maximum Flow rate: 94 l/h ● Maximum Pressure: 126 kg/cm2g ● hydraulically actuated diaphragm
● Conforms to API-675 Standard
Technical characteristics
Flow rate up to:
- 94 l/h for m-Roy A with metallic liquid end @ 7 kg/cm2 g
- 9.5l/h for m-Roy A with metallic liquid end @ 126 kg/cm2 g
Pressure up to:
- 126 kg/cm2 g for m-Roy with metallic liquid end
- 10 kg/cm2 g for m-Roy with plastic liquid end
Maximum temperature of pumped liquid:
- +90 ºC for metallic liquid end
- +45 ºC for plastic liquid end
Manual or automatic flow control, adjustment of flow rate while
running: from 0 to 100%
High-efficiency, hydraulically actuated PTFE diaphragm for
long life and high precision check valves for reliable sealing
Steady state accuracy ±1% of the rated capacity
Repeatability ±3% of the rated capacity
Turndown ratio 10:1
m-Roy - Metallic Liquid End
Maximum suction pressure condition: 6 kg/cm2 g
Adjustable internal hydraulic relief valve for pump protection
Diaphragm Rupture Detection System (DRDS) Liquid end construction
Options:
Components Materials
Variable speed drive, Electronic capacity controller, Pneumatic
actuator / ACC
m-Roy A,
DRDS with pressure gauge is standard. Pressure H, B & P
Model m-Roy A & H (Plastic Liquid End)
switch/transmitter is optional. (Metallic
Liquid End)
Characteristics of motors
Head CF8M PP PVC PVDF
Standard Motor Data:
m-Roy A & P Model: 0.5HP TEFC Enclosure Cartridge/Suction
SS-316 PVC PVC PVDF
m-Roy B & all model: 1.0HP TEFC Enclosure & Discharge valve
Power Supply: 415V – 50 Hz – 3 phase
Degree of protection: IP 55, class F Ball SS-316 CERAMIC CERAMIC CERAMIC
Motor Speed: 1440 rpm, IE2
Options: Seat SS-316 TEFLON TEFLON TEFLON
Flame/Explosion proof motors
Contour plate SS-316 SS-316 SS-316 SS-316
Accessories
Diaphragm PTFE PTFE PTFE PTFE
To meet your installation needs a large range of
accessories are available on request (Pulsation
dampeners, safety and back pressure valves), consult Note: Alloy20, SS316L, SS304 are the MOC options available for liquid
end. Contact company for more details.
us.
Doc.no: MRI-mROY-001
Performances m-Roy A (Metallic Liquid End)
PLUNGER GEAR
FLOW (LPH) Vs PRESSURE (Kg/Cm2 (g)) @ 100% STROKE Viscos
MODEL SPM ity in
DIAMETER RATIO 7 Kg 10 Kg 14 Kg 21 Kg 24.5 Kg 28 Kg 56 Kg 84 Kg 105 Kg 126 Kg
CPS
/Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2
MRA 11 H 7/16" 77:1 19 1.7 Performances
1.7 1.7 m-Roy
1.7 P (Metallic
1.7 1.7 Liquid
1.5 End
1.3 with
1.3 DRDS)
1 2400
MRA 12 H 7/16" 48:1 30 2.3 2.0 2.0 2.0 2.0 2.0 1.8 1.8 1.8 1.7 1460
MRA 13 H 7/16" 24:1 60 5.2 5.2 5.2 5.0 5.0 5.0 4.5 4.2 4 3.6 460
MRA 14 H 7/16" 15:1 96 8.5 8.3 8.3 8.3 8.0 8.0 7.7 7 6.5 6 250
MRA 15 H 7/16" 9.5:1 152 13.5 12.5 12.5 12.5 12.5 12.5 12.5 11 10 9.5 90
MRA 32 1-1/16" 48:1 30 19 18.5 18.5 17.8 17.0 -- -- -- -- -- 130
MRA 33 1-1/16" 24:1 60 38.5 38.0 38.0 36.0 35.0 -- -- -- -- -- 60
MRA 34 1-1/16" 15:1 96 60.8 60.5 60.0 58.0 57.0 -- -- -- -- -- 30
MRA 35 1-1/16" 9.5:1 152 94 92.5 91.0 -- -- -- -- -- -- -- 90
Note: Plastic liquid ends can be offered in specific cases for a maximum pressure of 10Kg/cm2 g. Contact factory for more details.
Performances m-Roy A (Metallic Liquid End with DRDS)
PLUNGER GEAR
FLOW (LPH) Vs PRESSURE (Kg/Cm2 (g)) @ 100% STROKE Viscos
MODEL SPM ity in
DIAMETER RATIO 7 Kg 10 Kg 14 Kg 21 Kg 24.5 Kg 28 Kg 56 Kg 84 Kg 105 Kg 126 Kg
CPS
/Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2
MRA 11D 7/16" 77:1 19 1.5 1.5 1.5 1.5 1.5 -- -- -- -- -- 2400
MRA 12D 7/16" 48:1 30 2.3 1.9 1.9 1.9 1.9 -- -- -- -- -- 1460
MRA 13D 7/16" 24:1 60 4.9 4.9 4.9 4.8 4.8 -- -- -- -- -- 460
MRA 14D 7/16" 15:1 96 8.1 7.9 7.9 7.9 7.6 -- -- -- -- -- 250
MRA 23D 5/8” 24:1 60 11.2 10.9 10.9 10.5 10.5 -- -- -- -- -- 220
MRA 32D 1-1/16" 48:1 30 18.1 17.6 17.6 16.9 16.2 -- -- -- -- -- 130
MRA 33D 1-1/16" 24:1 60 36.6 36.1 36.1 34.2 33.3 -- -- -- -- -- 60
MRA 34D 1-1/16" 15:1 96 57.8 57.5 57 55.1 54.2 -- -- -- -- -- 30
MRA 35D 1-1/16" 9.5:1 152 89.3 87.9 86.5 -- -- -- -- -- -- -- 90
Note: Plastic liquid ends can be offered in specific cases for a maximum pressure of 10Kg/cm2 g. Contact factory for more details.
Performances m-Roy P (Metallic Liquid End)
PLUNGER GEAR
FLOW (LPH) Vs PRESSURE (Kg/Cm2 (g)) @ 100% STROKE Viscos
MODEL SPM ity in
DIAMETER RATIO 7 Kg 10 Kg 14 Kg 21 Kg 24.5 Kg 28 Kg 56 Kg 84 Kg 105 Kg 126 Kg
CPS
/Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2
MRP 11 7/16" 77:1 19 1.5 1.5 1.5 1.5 1.5 -- -- -- -- -- 12200
MRP 12 7/16" 48:1 30 2 1.8 1.8 1.8 1.8 -- -- -- -- -- 7500
MRP 13 7/16" 24:1 60 4.5 4.5 4.5 4.0 4.0 -- -- -- -- -- 4000
MRP 14 7/16" 15:1 96 7.5 7 7.0 7.0 6.5 -- -- -- -- -- 2000
MRP 23 5/8” 24:1 60 10 9.5 9.5 9.0 9.0 -- -- -- -- -- 2500
MRP 32 1-1/16" 48:1 30 16 15.5 15.5 15.2 14 -- -- -- -- -- 1000
MRP 33 1-1/16" 24:1 60 32.5 32 32 30 29 -- -- -- -- -- 500
MRP 34 1-1/16" 15:1 96 52 51 51 49 48 -- -- -- -- -- 300
Note: Plastic liquid ends can be offered in specific cases for a maximum pressure of 10Kg/cm2 g. Contact factory for more details.
Doc.no: MRI-mROY-001
Performances m-Roy P (Metallic Liquid End with DRDS)
PLUNGER GEAR
FLOW (LPH) Vs PRESSURE (Kg/Cm2 (g)) @ 100% STROKE Viscos
MODEL SPM ity in
DIAMETER RATIO 7 Kg 10 Kg 14 Kg 21 Kg 24.5 Kg 28 Kg 56 Kg 84 Kg 105 Kg 126 Kg
/Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 CPS
MRP 11D 7/16" 77:1 19 1.4 1.4 1.4 1.4 1.4 -- -- -- -- -- 12200
MRP 12D 7/16" 48:1 30 1.9 1.7 1.7 1.7 1.7 -- -- -- -- -- 7500
MRP 13D 7/16" 24:1 60 4.3 4.3 4.3 3.8 3.8 -- -- -- -- -- 4000
MRP 14D 7/16" 15:1 96 7.1 6.7 6.7 6.7 6.2 -- -- -- -- -- 2000
MRP 23D 5/8” 24:1 60 9.5 9 9.0 8.6 8.6 -- -- -- -- -- 2500
MRP 32D 1-1/16" 48:1 30 15.2 14.7 14.7 14.5 13.3 -- -- -- -- -- 1000
MRP 33D 1-1/16" 24:1 60 30.9 30.4 30.4 28.5 27.6 -- -- -- -- -- 500
MRP 34D 1-1/16" 15:1 96 49.4 48.5 48.5 46.6 45.6 -- -- -- -- -- 300
Note: Plastic liquid ends can be offered in specific cases for a maximum pressure of 10Kg/cm2 g. Contact factory for more details.
Performances m-Roy B (Metallic Liquid End)
PLUNGER
GEAR
FLOW (LPH) Vs PRESSURE (Kg/Cm2 (g)) @ 100% STROKE Viscos
MODEL DIAMETER SPM ity in
RATIO 7 Kg 10 Kg 28 Kg 41 Kg 65 Kg 83 Kg 100 Kg
(mm) -- -- -- CPS
/Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2 /Cm2
MRB 11 15 25:1 58 18.0 17.5 17.0 16.5 16.0 15.0 14.0 -- -- -- 130
MRB 12 15 15:1 96 27.5 27.0 26.5 26.0 25.0 24.5 24.0 -- -- -- 59
MRB 13 15 10:1 144 45.0 44.0 42.0 40.0 39.0 38.0 36.0 -- -- -- 39
MRB 21 22 25:1 58 34.0 33.0 32.0 31.0 30.0 -- -- -- -- -- 325
MRB 22 22 15:1 96 65.5 65.0 60.0 57.0 50.0 -- -- -- -- -- 143
MRB 23 22 10:1 144 88.0 87.0 83.0 80.0 75.0 -- -- -- -- -- 94
Note: Plastic liquid ends can be offered in specific cases for a maximum pressure of 10Kg/cm2 g. Contact factory for more details.
Performances m-Roy B (Metallic Liquid End with DRDS)
PLUNGER
GEAR
FLOW (LPH) Vs PRESSURE (Kg/Cm2 (g)) @ 100% STROKE Viscos
MODEL DIAMETER SPM ity in
RATIO 7 Kg 10 Kg 28 Kg 41 Kg 65 Kg
(mm) -- -- -- -- -- CPS
/Cm2 /Cm2 /Cm2 /Cm2 /Cm2
MRB 21D 22 25:1 58 32.0 31.0 30.0 27.0 28.0 -- -- -- -- -- 325
MRB 22D 22 15:1 96 62.0 61.0 57.0 57.0 47.0 -- -- -- -- -- 143
MRB 23D 22 10:1 144 83.0 82.0 78.0 76.0 77.0 -- -- -- -- -- 94
Note: Plastic liquid ends can be offered in specific cases for a maximum pressure of 10Kg/cm2 g. Contact factory for more details.
Doc.no: MRI-mROY-001
Performances m-Roy A (Metallic Liquid End with DRDS)
m-ROY A WITH PLASTIC LIQUID ENDS m-ROY A WITH PLASTIC LIQUID ENDS & DRDS
FLOW (LPH) Vs PRESSURE (Kg/Cm2 (g)) @ FLOW (LPH) Vs PRESSURE (Kg/Cm2 (g)) @
100% STROKE 100% STROKE
MODEL SPM MODEL SPM
7 Kg/Cm2 (g) 10 Kg/Cm2 (g) 7 Kg/Cm2 (g) 10 Kg/Cm2 (g)
MRA 11 H 19 1.7 1.7 MRA 11D 19 1.5 1.5
MRA 12 H 30 2.3 2 MRA 12D 30 2.3 1.9
MRA 13 H 60 5.2 5.2 MRA 13D 60 4.9 4.9
MRA 14 H 96 8.5 8.3 MRA 14D 90 8.1 7.9
MRA 15 H 152 13.5 12.5 MRA 23D 60 11.2 10.9
MRA 32 30 19 18.5 MRA 32D 30 18.1 17.6
MRA 33 60 38.5 38 MRA 33D 60 36.6 36.1
MRA 34 96 60.8 60.5 MRA 34D 96 57.8 57.5
MRA 35 152 94 92.5 MRA 35D 152 89.3 87.9
Note: Plastic liquid ends can be offered in specific cases for a maximum pressure of 10Kg/cm2 g. Contact factory for more details.
Dimensions
General Arrangement Of mROY-A & H Series Pump (Metallic Liquid End)
Doc.no: MRI-mROY-001
General Arrangement Of mROY-A Series Pump (Metallic Liquid End)
General Arrangement Of mROY-A Series Pump (Plastic Liquid End)
Doc.no: MRI-mROY-001
General Arrangement Of mROY-B Series Pump (Metallic Liquid End)
*Any changes in this catalogue applicable without prior Information
Plot No: 45/1, 8th Avenue, Domestic Tariff Area,
Mahindra World City, Chengalpet District,
Chengalpet – 603004, Tamilnadu, India.
Tel Ph. No: +91-44-71113111
[email protected] |www.miltonroyindia.com
Doc.no: MRI-mROY-001
