Component Catalogue Formwork

Component Catalogue Formwork

© Copyright by PERI GmbH
e 08/2005 10ma Art.Nr.: 791916

PERI GmbH
P. O. Box 12 64
89259 Weissenhorn
Tel.: 0 73 09 / 9 50-0
Fax: 0 73 09 / 9 51-0
[email protected]
www.peri.de
D
Edition 08/2005

PERI GmbH
P. O. Box 12 64
89259 Weissenhorn
Tel.: 0 73 09 / 9 50 -0
Fax: 0 73 09 / 9 51 -0
[email protected]
www.peri.de

Important notes:

Our products are to be used in accordance

with the relevant national and european safety
regulations.

The illustrations in this brochure are photographs

of real site situations. Safety or formwork anchor
details are therefore not to be taken as a definitive
guide to the way the equipment is to be used.

Safety precautions and allowable loads are to be

strictly observed. Separate structural calculations
are required for any deviations from the standard
design data.

The information contained herein is subject to

technical change in the interests of progress.
1 Formwork Girders 1.10 Girder GT 24 3-6
1.20 Girder VT 20K

2 Girder 2.10 VARIO GT 24 7 - 30

Wall Formwork 2.20 VARIO Box Culvert Form

2.40 Façade Formwork FTF 31 - 38

3 Circular 3.10 Articulated Waler GRV 39 - 52

Wall Formwork 3.20 RUNDFLEX

4 Panel 4.10 TRIO 4.20 TRIO-L Alu 53 - 84

Wall Formwork 4.30 TRIO 330 4.40 TRIO Structure

4.50 TRIO HOUSING 85 - 102

4.60 DOMINO 103 - 116

4.70 HANDSET 117 - 128

5 Climbing-, 5.10 Climbing System KG 129 - 144

Platform Systems
5.20 Climbing System CB 145 - 160

5.30 Single Sided Climbing System SKS 161 - 172

5.40 Internal Platform BR 173 - 176

5.50 Platform System FB 180 177 - 190

5.60 Platform System ASG 160 191 - 206

5.70 ACS Self Climbing System (on request)

6 Column Formwork 6.10 RAPID Column 207 - 212

6.20 VARIO GT 24 Column 213 - 218

6.30 TRIO Column 219 - 224

6.40 QUATTRO Column 225 - 232

6.50 SRS Steel Circular Column 233 - 240

7.10 - 23.10 Alphabetical and numerical index

241 - 455
456 - 486
 1.10
-
1.10 Girders GT 24 1.20 Girders VT 16 K, VT 20 K 1.20

Page Page

070750 End Protection Cap GT 24, galv. 4 074900 Cutting Cost Girder VT 5
075000 Girder GT24, Spec. Length l=6.00-17.80m 4 074610 Girder VT 16K, l=2.45m 5
075090 Girder GT24, l=0.60m RF 4 074620 Girder VT 16K, l=2.90m 5
075100 Girder GT24, l=0.90m 4 074630 Girder VT 16K, l=3.30m 5
075120 Girder GT24, l=1.20m 4 074640 Girder VT 16K, l=3.60m 5
075150 Girder GT24, l=1.50m 4 074650 Girder VT 16K, l=3.90m 5
075180 Girder GT24, l=1.80m 4 074660 Girder VT 16K, l=4.90m 5
075210 Girder GT24, l=2.10m 4 074670 Girder VT 16K, l=5.90m 5
075240 Girder GT24, l=2.40m 4
075270 Girder GT24, l=2.70m 4 074990 Girder VT 20K, l=1.45m 5
075300 Girder GT24, l=3.00m 4 074905 Girder VT 20K, l=2.15m 5
075330 Girder GT24, l=3.30m 4 074910 Girder VT 20K, l=2.45m 5
075360 Girder GT24, l=3.60m 4 074890 Girder VT 20K, l=2.65m 5
075390 Girder GT24, l=3.90m 4 074920 Girder VT 20K, l=2.90m 5
075420 Girder GT24, l=4.20m 4 074930 Girder VT 20K, l=3.30m 5
075450 Girder GT24, l=4.50m 4 074940 Girder VT 20K, l=3.60m 5
075480 Girder GT24, l=4.80m 4 074950 Girder VT 20K, l=3.90m 5
075510 Girder GT24, l=5.10m 4 074960 Girder VT 20K, l=4.50m 5
075540 Girder GT24, l=5.40m 4 074970 Girder VT 20K, l=4.90m 5
075570 Girder GT24, l=5.70m 4 074980 Girder VT 20K, l=5.90m 5
075600 Girder GT24, l=6.00m 4

German Approval Certificate No.: Z-9.1-157

D for Girder GT 24

German Approval Certificate No.: Z-9.1-216

for Girder VT 16K and VT 20K

3
 Weight kg Item no.

GT 24 Girder
German Approval
Certificate No. Z-9.1-157
Perm. Shear Force QD = 14,0kN* * QD = Permiss. shear force on compression struts
Perm. Shear Force QZ = 13,0kN** **QZ = Permiss. shear force on tension struts
Perm. Bending Moment M = 7,0kNm
Moment of Inertia ly = 8000cm4

918 1510 2102 2694 3286 3878 4470 5062 5654

1214 1806 2398 2990 3582 4174 4766 5358 5950

Nominal Lengths
0,60m RF 4,45 075090
0,90m 5,30 075100
1,20m 7,10 075120 Girder end
To simplify handling the most 1,50m 8,90 075150 163 296 296 = standard joint spacing

common GT 24 Girders are 1,80m 10,60 075180

colour coded for length. 2,10m 12,40 075210
60 120 60

2,40m 14,20 075240

240

brown 2,70m 15,90 075270

grey 3,00m 17,70 075300
blue 3,30m 19,50 075330 311 28
red 3,60m 21,20 075360 80
green 3,90m 23,00 075390 Girder joint
4,20m 24,80 075420
296 296
4,50m 26,60 075450
4,80m 28,30 075480
5,10m 30,10 075510
5,40m 31,90 075540
5,70m 33,60 075570
6,00m 35,40 075600
GT 24 Special Lengths 5,90/m 075000
6,00-17,80m
Girder Joint 070700

End Protection Cap GT 24, galv. 0,06 070750

For protecting timber chord of girder
against being sawn off accidentally.
55 30
1
80

4
 1.10
-
1.20
Weight kg Item no.

VT 20K Girder
With steel end caps.
German Approval

40
Certificate No. Z-9.1-216

perm. Q = 11,0kN

200

120

22
perm. M = 5,0kNm
ly = 4290cm4

40
27
50 140 140
80

Nominal lengths
1,45m 8,60 074990
2,15m 12,70 074905
2,45m 14,50 074910
2,65m 15,60 074890
2,90m 17,10 074920
3,30m 19,50 074930
3,60m 21,20 074940
3,90m 23,00 074950
4,50m 26,70 074960
4,90m 28,90 074970
5,90m 34,80 074980
2150 2650 3300 3900 4900
1450 2450 2900 3600 4500 5900
Cutting Cost VT Girder 074900

VT 16K Girder*
German Approval
Certificate No. Z-9.1-216
40

Perm. Shear Force Q = 8,5kN

160

80

Perm. Bending Moment M = 3,5kNm

Moment of Inertia ly = 2420cm4
40

* is no longer produced 27

80

Nominal Lengths
2,45m 11,30 074610
2,90m 13,30 074620
3,30m 15,20 074630
3,60m 16,60 074640
3,90m 17,90 074650
4,90m 22,50 074660
5,90m 27,10 074670 2450 3300 3900 5900
2900 3600 4900

Cutting Cost VT Girder 074900

5
6
2.10 VARIO GT 24
2.10
Page Page -
2.20
010350 Additional Row of SRZ Slots 11 024640 Quick Str. Hook Strap 24-100/140, galv. 16
102945 Alignment Clamp VRS Architect. Concrete 14 027110 Scaffold Jack GB 80 21
103054 Articulated Coupling GKS 60/60 14 101706 Shutter Joint Profile 21/40 l=3.00m 20
013220 Articulated Coupling GKZ 60/60 13 Steel Waler SRZ U100 10
013210 Articulated Coupling GKZ 76/76 13 010080 Steel Waler SRZ U100, Spec. Length 11
013230 Articulated Coupling GKZ Spec. Length 13 010150 Steel Waler SRZ U120, Spec. Length 11
104027 Attachment VARIO 24 U120 12 010090 Steel Waler SRZ U140, Spec. Length 11
013240 Bulkhead Tie 17 Steel Waler Universal SRU U120 12
031200 Chamfer Strip with Flange l=2.50m 20 103943 Steel Waler Universal SRU U140 l=4.97m 12
024270 Coach Screw DIN 571 8x 60, galv. 20 024210 Tie Yoke SKZ 17
024260 Coach Screw DIN 571 8x 80, galv. 20 024470 TSS-Torx 6x60, galv. 20
100541 Connector for Platform VARIO 25 024690 TSS-Torx 6x80, galv. 20
013130 Corner Coupling EKZ 76/76 13 103737 Universal Coupling UK 70 14
013140 Corner Coupling EKZ 95/43 13 010440 VARIO Steel Waler VSRZ-24 U100 l=1.20/12 10
013180 Corner Coupling EKZ Spec. Length 13 010420 VARIO Steel Waler VSRZ-24 U100 l=2.45/12 10
027070 Corner Scaffold Bracket EGB 80, left 21 028060 Wedge Headpiece SRZ/SRU 18
027060 Corner Scaffold Bracket EGB 80, right 21 024250 Wedge K, galv. 17
024220 Coupling Compression Plate KDP 17 024240 Wedge KZ, galv. 17
401395 Coupling Offset VVKZ 3/99 13 010400 Welding Unit for KRZ 11
102825 Coupling VKS 99 Architec. Concrete 14 010500 Welding Unit for VSRZ 10
013010 Coupling VKZ 99 13 010490 Welding Unit for VSRZ/12 10
013020 Coupling VKZ 147 13
013030 Coupling VKZ 211 13
013080 Coupling VKZ Special Length 13
021980 Crane Eye 24, left 19 2.20 VARIO Box Culvert Form
021990 Crane Eye 24, right 19
070760 Crane Splice GT 24 19
010180 Cross Waler KRZ U100, Spec. Length 11 022400 Adjustable Spindle RKR 28
010270 Cross Waler KRZ U120, Spec. Length 11 022410 Corner Spindle RKR 28
010190 Cross Waler KRZ U140, Spec. Length 11 022310 Culvert Frame Waler RKR U100 26
018280 Double Head Nail l=65mm 20 022320 Culvert Frame Waler RKR U120 26
024170 Double Hook Strap for GT 24, galv. 15 022330 Culvert Frame Waler RKR U140 26
Element VARIO S 100 8 022340 Culvert Frame Waler RKR U160 26
Element VARIO S 125 8 022350 Culvert Frame Waler RKR U180 26
Element VARIO S 187.5 8 022440 Double Spindle RKR 28
Element VARIO S 250 8 022380 Double Spindle RKR with Wheel 28
710001 End Plate SRZ 11 701991 Welding Plate 50x20x120 28
103932 End Platform VARIO 23 022460 Welding Unit for RKR 26
024480 Extension Splice 24-2 19
103992 External Corner Platform VARIO 23
024140 F.H. Bolt DIN 603 M 8x 70 w.N, galv. 15
710240 F.H. Bolt DIN 603 M 8x100 w.N, galv. 15
104031 Filler Pin Ø 21x120 14
024630 Fix Strap U100-120, galv. 16
030260 Formwork Joint SSP l=2.50m 20
024600 Girder Claw HB 16
028050 Girder Headpiece GT 24, galv. 18
028070 Girder Headpiece GT 24/A, galv. 18
103865 Handrail Frame for End Platform 23
034580 Handrail Post HSGP 24
027590 Hook Strap for SB, galv. 18
024070 Hook Strap HB 24-100/120, galv. 15
024080 Hook Strap HB 24-140/160, galv. 15
024860 Hook Strap HB Clamp 150, galv. 15
024610 Hook Strap HBA 30, galv. 16
104930 Hook Strap Uni Doubel HBUD 20-24 15
104096 Hook Strap Uni Doubel HBUD 24-28 15
104931 Hook Strap Uni HBU 20-24 15
103845 Hook Strap Uni HBU 24-28 15
Inside Corner Panel VARIO S 75/75 8
010200 Internal Corner Waler IRZ 75/75 11
107738 Ladder 240-360 25
103850 Outside Corner Coupling AKZ 85/85 14
105480 Platform Beam VARIO, left 24
105484 Platform Beam VARIO, right 24
105823 Platform Bracket VARIO VBK 90 24
100813 Platform Handrail 80 VARIO 25
101273 Platform Strut 167 VARIO 25
101269 Platform Strut 246 VARIO 25
Platform VARIO 100 22
Protection Board 8
Quick Release Corner SSE 20

7
VARIO GT 24
Weight kg Item no.

Panels VARIO S
Formlining: 21mm
Perm. fresh concrete pressure: 60kN/m2
Panels with slip boards, cover board and
crane lifting eye 24 (1x left, 1x right).

Width of Panel = 2.50m

250 x 240* 317,00 101241
250 x 300 378,00 101242
250 x 360 485,00 101243
250 x 420 593,00 101244
250 x 480 642,00 101245
250 x 540 749,00 101246
250 x 600 798,00 101247

Width of Panel b = 1.875m

187 x 240* 240,00 101248
187 x 300 287,00 101249
187 x 360 368,00 101250
187 x 420 450,00 101251 Height of panel h = 2.40m
187 x 480 487,00 101252
187 x 540 569,00 101253
187 x 600 605,00 101254

Width of Panel = 1.25m

125 x 240* 173,00 101255
125 x 300 210,00 101256
125 x 360 267,00 101257
125 x 420 324,00 101258
125 x 480 352,00 101259
125 x 540 410,00 101260
125 x 600 438,00 101261

Width of Panel = 1.00m

100 x 240* 145,00 101411
100 x 300 175,00 101410
100 x 360 224,00 101409
100 x 420 273,00 101408
100 x 480 295,00 101407
100 x 540 344,00 101406
100 x 600 366,00 101405

Corner Panels
75/75 x 240* 214,00 101471
75/75 x 300 255,00 101470
75/75 x 360 330,00 101469
75/75 x 480 435,00 101467
Height of panels 3.00m – 6.00m
75/75 x 600 541,00 101465

* 2.40m high panels do not have

cover board and crane lifting eyes.

Accessories:
Cover board 250 6,50 101311
Cover board 187.5 4,80 101318
Cover board 125 3,20 101319
Cover board 100 2,60 101404
Cover board IE 75/75 5,50 101464

Load-bearing point
Permissible load: 700kg, Height of corner panels
2.40m/3.00m/3.60m/4.80m/6.00m
at maximum angle of inclination of 15°.

8
 2.10
Width of panel = 2.50m -
2500 2.20
78 297 350 350 350 350 350 297

21
240
100
625 1250 625

Width of panel = 1.875m Corner Panels 75/75

1875 750
78 319,5 360 360 360 319,5

750
625 625 625

Width of panel = 1.25m

1250
78 297 180 320 297

6.00*

5.40

Width of panel = 1.00m

1000
78 297 250 297 4.80*
1184

1184
4.20

Panel heights for 3.60*

– VARIO Panel, Standard
– * VARIO Corner Panels,
1184

1184

1184

1184

Standard
3.00*
5950
5358

2.40*
4766
1184

1184

1184

1184
1184
4174
3582
2990
1776
2398
1184

1184

1184

1184

1184

1184
459

459

459

459

459

459

459

9
 Weight kg Item no.

Steel Waler SRZ SRZ 95 23,10 010600

Profile U100 SRZ 120 25,30 010030
30 170 135 135 170 30
Wy = 82,4cm3 SRZ 145 34,00 010610
Iy = 412cm4 SRZ 182.5 40,00 010060
SRZ 195 42,70 010070
SRZ 245 52,10 010050 950
SRZ 295 61,90 010120

30 170 135 135 170 30

End-Detail 1200

ø6 93 25
ø9 30 170 135 205 205 135 170 30
60

52
100

52 20 60 46
1450
152 40 7 x 60 = 420
6 x 60 = 360
(SRZ 95) 30 170 135 205 205 135 170 30

913
1825

30 170 135 205 205 135 170 30

975
1950

30 170 135 205 445 445 205 135 170 30

50
2450

30 170 135 205 445 445 205 135 170 30

300 300
Special lengths and other 2950
profiles upon request.

Steel Waler VARIO

VSRZ 24 U100 l=120/12 32,40 010440
VSRZ 24 U100 l=245/12 59,10 010420
Profile U100
Wy = 82,4cm3 20 236
Iy = 412cm4 ø9
45

30

26

93
181

25
236
210
46

120 100
60

52 30 170 135 135 170 30 52

100 1200

445 205 135 170 30

2450

Special lengths and other

profiles upon request.
Welding Unit for VSRZ/12 010490
Welding Unit for VSRZ 010500

10
 Weight kg Item no.
2.10
Internal Corner Waler IRZ 75/75 43,50 010200 -
With U100 channel section. 2.20
For erecting a 750x750mm corner panels.
Allows easier striking.

715 152
66 301 38 130
Shuttered

236
100
727
300

38
Wedge KZ for bracing.
(not supplied) 55
ca. 24mm

Accessories:
KZ Wedge (1x) 0,85 024240

Cross Waler KRZ Special Length

For narrow lift shafts. 52
20
KRZ U100 22,00/m 010180
KRZ U120 28,00/m 010270
KRZ U140 33,00/m 010190
Welding Unit for KRZ 010400

85 60 46
52

100
236

180
93

26
40 170 135 25
100 236 ø9 130
C

For ordering give dimensions C and D.

Steel Waler SRZ Special Length 55 52 55

60 52 60
50 52 50
SRZ U100 22,00/m 010080
SRZ U120 28,00/m 010150
140
120
100

SRZ U140 33,00/m 010090

Maximum length 12,0m

U100 U120 U140
Wy = 82.4cm3 Wy = 121.4cm3 Wy = 172.8cm3
Additional Row of SRZ Slots 010350 Iy = 412cm4 Iy = 728cm4 Iy = 1210cm4

End Plate SRZ 0,35 710001

For special steel waler. ø6 58 58 5
ø9
39 13
60

14
6

51,6

11
 Weight kg Item no.
51 7 x 60 = 420
Universal Steel Waler SRU 55 52 55 60
Complete with Spacer Sleeve, 46
ø 21
Hex. Bolt M20x90, galv. and

37 53
120
Hex. Nut M20, galv.
48 125 n x 125
U120 profile SRU 72 18,20 103868
Wy =121,4cm3 SRU 97 24,40 103871 60 52 60

Iy =728cm4 SRU 122 31,00 103874

SRU 147 37,60 103877

140
U140 profile SRU 172 44,40 103886
21 100
Wy =172,8cm3 SRU 197 51,00 103889
Iy =1210cm4 SRU 222 57,60 103898 7 17
SRU 247 64,40 103892

19
SRU 272 71,00 103929

112
SRU 297 77,60 103903
SRU 347 91,00 103906
SRU 397 104,00 103915 36 70 x
SRU 447 117,00 103918 65 65 65
198,5
SRU 497 131,00 103922
SRU 547 144,00 103925
SRU 597 157,00 103928
597
SRU 497 158,00 103943

70
U140*

535
547

70

70
535
497 497*

700
70

70
70
535

535
447

70
616
70

70

70
821
535

70
397

654

654
70

519
70

70
535

347 70

70
70
654
70

519
532
70

654
558
535

297
70

70

5972
585

70
70

70

272

70
5472
70

599

639
70

70
535

247

4972
4972

654
898
636

872
70
70

525
535

222
70
70

4472
70

535

197 70
70

70
70

3972

70

70
680

933

821
70

535

172
654
3472
70 323 70

638
615

645

532

519
70

535

147
70

2972
70

70
2722

70

70

70
70

70
561

70
70

122
70
70

2472
2222
410 70

800
800

97
595

700
657

654

654

654
636

616
615
1972

585
550
70

1722
70

72
1472
70

70

70

70

70

70

70

70

70

70

70

70

70
70

1222
70

879
972
760

530

595

535

535

535

535

535

535

535

535

535

535

535

535
510

722
70

70

70

70

70

70

70

70

70

70

70

70

70

70

70

70

70

VARIO Extension 24 U120 7,33 104027 52 52 60 M 16

Complete with:
53
120

Hex. Bolts ISO 4017 M16x50-8.8, galv.

Item no. 710252, washer 18, DIN 434, galv. 162 46

Item no. 710880 and Hex. Nut ISO 7040

M16-8, galv., Item no. 104024 (4 each)
236

12
 Weight kg Item no.
2.10
Coupling VKZ -
For continuously variable tight (tension and 2.20
compression) connection of steel walers
SRZ, SRU or for Filler Profiles.

8
Wy = 17,1cm3

44
160 160 160
Iy = 68,3cm4
11

32 80 46

20

80
990
1470
2110

VKZ 99 9,00 013010

VKZ 147 13,30 013020
VKZ 211 19,10 013030
VKZ Special Length 9,00/m 013080

160 160 10
Offset Coupling VVKZ 3/99 7,11 101395
10
For connecting extended VARIO elements with

30
non-extended VARIO elements above the
12
extension.

30
Wy =12,6cm3 32 80
Iy =50,4cm4
80

80
45
990

30

Articulated VARIO Coupling GKZ

For continuously variable tight (tension and
compression) connection of steel walers
with oblique angles greater than 48°.
GKZ 60/60 11,40 013220
GKZ 76/76 14,20 013210 640 483
GKZ Special Length 9,00/m 013230 790 690
44
80

600 600
760 760

Corner Coupling EKZ

For continuously variable tight (tension and
44

compression) connection of steel walers

especially for shaft formwork.
EKZ 95/43 12,00 013140
EKZ 76/76 13,40 013130 948
EKZ Special Length 9,00/m 013180 765
80
429
765

13
 Weight kg Item no.

Universal Coupling UK 70 10,80 103737

For bending-resistant connection of the
SRU Universal Steel Waling and
Connecting SLS heavy-duty spindles. 685

62,5 187,5 125 187,5 62,5 46

47,5
210

47,5
40
ø 21 51
21 mm diam. Connection for ø 50 for using
SLS heavy-duty spindle Tie Rod Cylinder Yoke, galv.
Accessories:
Fitting bolt ø 21x120mm 0,46 104031

44 845
External corner coupling AKZ 85/85 24,80 103850
For continuous connections of SRU

120
and SRZ steel walings under tension
and pressure on external corners.
Wedge position to articulate
the coupling

845 Wedge position to articulate

the coupling

VARIO coupling VKS 99 8,70 102825

For connecting VARIO GT 24 panels.
Can be used to eliminate offsets
of up to 5mm.

44
11 160 160 160

32 80 46

80
990

Accessories:
VARIO alignment clamp VRS, galv. 2,10 102945

Articulated coupling GKS 60/60 11,30 103054

Can be used to eliminate offsets
640 483
of up to 5mm.
44

600 600
Accessories:
VARIO alignment clamp VRS, galv. 2,10 102945

m
VARIO alignment clamp VRS, galv. 2,10 102945 5m
x.
ma
Used in conjunction with coupling
VKS 99 or articulated coupling GKS.
Can be used to eliminate offsets
247

of up to 5mm.

B15

14
 Weight kg Item no.
2.10
Hook Strap 24, galv. -
For connection of GT 24 Girder to SRZ. 102 2.20
HB 24-100/120 0,61 024070
For SRZ U100/U120 M 8x70
HB 24-140/160 0,69 024080 DIN 603

For SRZ U140/U160

152 (U100)
20 82 20 162 (U120)
172 (U140)
182 (U160)

Spare Bolt:
F.H. Bolt M8x70 MU DIN 603, galv. 0,04 024140

Hook Strap Uni HBU 20-24 0,83 104931

Hook Strap Uni HBU 24-28 0,85 103845
For fixing one GT24 or VT 20K girders to
steel walings U100 – U140. Girders can be
infinitely fixed at rightangles or oblique to
the waling. Also used outside the node point! 80

max. 240
min. 200
152 (162) (172)

Hook Strap Uni Double HBUD 20-24 0,85 104930

Hook Strap Uni Double HBUD 24-28 0,88 104096
For fixing two GT24 girders or VT 20K
girders to steel walings U100 – U140.
Girders can be infinitely fixed at rightangles
or oblique to the waling.
Also used outside the node point!
160
max. 280
min. 240

152 (162) (172)

Hook Strap HB Cross Strap 150 0,58 024860

Double Hook Strap for GT 24 0,73 024170
For connecting 1 (2) GT 24 outside the joint,
and for connecting edge timbers to the steel
waler SRZ. Girders can also be fixed oblique 98 20

to the waling. M 8x70 (164)

(M 8x100)
DIN 603
152 (U100)
162 (U120)

20

150 (184)

Spare Bolt:
F.H. Bolt M8x70 MU DIN 603, galv. 0,04 024140
F.H. Bolt M8x100 MU DIN 603, galv. 0,05 710240

15
 Weight kg Item no.

Girder Claw HB 0,86 024600

For SRZ U100/U120.
For connection of end Girders GT 24
to SRZ Steel Waler. 64 78 M8x100
DIN 603

152 (U100)

162 (U120)
151
100
20

164

Spare Bolt:
F.H. Bolt M8x100 MU DIN 603, galv. 0,05 710240

Fix Strap U100/120, galv. 0,72 024630 Chord timber 6/8 e ≈ 1.0m
For connection of GT 24 Girder
in a VARIO Corner unit. M8x100
DIN 603

162 (U120)
152 (U100)

80
20

36

20 113
Spare Bolt:
F.H. Bolt M8x100 MU DIN 603, galv. 0,05 710240

Quick Strike Hook Strap 24-100/140, galv. 0,92 024640

For the connection of GT 24 Girder
to SRZ Steel Waler U100 - U140
at any position or angle.

SAFETY PRECAUTION!
If the crane splice 24 or crane lifting point
Secured with double-
unit 24 is being used, GT 24 girders Nail hole ø 4 headed nail (x2)
connected with the quick strike hook strap 54 90 Always use hook
strap crosswise.
must also be screwed with a corresponding
number of formlining screws!
98

Nail hole ø 4

Hook Strap HBA 30, galv. 0,74 024610

For connection of GT 24 Girder to
SRZ U100/U120 when Steel Waler
is fixed off node.
82 20
45

34
152 (U100)

Spare Bolt:
F.H. Bolt M8x70 MU DIN 603, galv. 0,04 024140

16
 Weight kg Item no.
2.10
SKZ Tie Yoke 2,30 024210 -
For tensioning external corners. 92 2.20

35°
Suitable for SRZ Profile U 100 to U 140

0°
ø 18

x7
min
or couplings.

ma
155
131
22
Wedge KZ
Accessories:
51
KZ Wedge (1x) 0,85 024240

20
48
Wedge KZ 0,85 024240
For connecting panels with VARIO
couplings or fixing tie yoke SKZ.

254
`
2 Wedge KZ configurations
possible:

Wedge KZ with Wedge KZ with

Note: 4 slots free 2 slots free
Always leave even number of slots
free between the wedges KZ .

Coupling Compression Plate KDP 1,30 024220 90 128

For connecting GT 24 to VARIO Couplings 48 12

to form infills.
48

25
120
95

ø4 ø 12
22

Accessories:
Wedge K (1x) 0,34 024250
107

Coach Screw
F.H. Bolt M8x60 DIN 571, galv. (4x) 0,023 024270

Wedge K 0,34 024250 35 20

For connecting Coupling Compression

Plate KDP or Wedge Head Piece.
208

ø8 8

Stopend Tie VARIO 2,10 013240

For stopend panels in VARIO GT 24.
SW 30/70
Thread
DW15
8

390
20
80

Permissible Load: 30,0kN

Accessories:
Wedge KZ (2x) 0,85 024240

17
 Weight kg Item no.

Girder Headpiece GT 24, galv. 4,50 028050

For fixing Push-Pull Props
and Kicker Braces to the GT 24 Girder.
Complete with: 136 145
Pin ø 16x42 and Cotter Pin 4/1 (1x). 40 14

170
100
60
ø 16x42 min 40
FS 4/1
max 100

Girder Headpiece GT 24/A, galv. 4,60 028070

For attaching push-pull props or as a
replacement for the Platform Connector
with extended GT 24 girders in the area
of the Extension Splice 24-2.
Complete with: 145
Pin ø 16x42 and Cotter Pin 4/1 (1x).
30 15

170
ø 16x42
FS 4/1

max 100
min 52

155

Wedge Headpiece SRZ/SRU 2,10 028060

For fixing Push-Pull Props and Kicker Braces
to the Steel Walers SRZ/SRU
100

24

Profile U100, U120 and U140.

Complete with:
Pin ø 16x42 and Cotter Pin 4/1 (1x).
U140 27

48 U120 27
14
80

Accessories: ø 16x42 U100 27

Wedge K (1x) 0,34 024250 FS 4/1

Hook Strap for SB 1 / 2, galv. 2,80 027590

For connecting Brace Frame SB 1 and SB 2
to SRZ Steel Walers U100 to U140.
150 35

30
152 (U100)
162 (U120)
M14

Requires 22mm spanner.

18
 Weight kg Item no.
2.10
Extension Splice 24-2 7,20 024480 -
For height extension of formwork panels 2.20
with GT 24 Girders up to a height of 8,0m.
Complete with:
Triple Wingnut (2x)

Required quantity per panel b = 2,50m.

- form height up to 5,00m: 4 pieces.
- form height up to 8,00m: 8 pieces.

850
626
28

For load capacity

122
refer to PERI Formwork
and Design Tables.

Crane Splice 24 3,90 070760

60
Min. 2 N° per formwork unit.
Complete with:
Pin ø 16x65/86 and Cotter Pin 4/1 (1x).

110
Follow Instructions for Use.
35
59

31

≤ 15°
ø 16x65/86 648
FS 4/1

Lifting device to
BGR 500
Permissible load: 30 25
700kg, at maximum
angle of inclination 117
of 15°.

Crane Eye 24, right 2,80 021990

Crane Eye 24, left 2,80 021980
Complete with: 60
Hex. Bolt ISO 4014 M10x110-8.8, galv.,
Washer DIN 440 R 11, galv. and
Hex. Nut ISO 7042 M10-8, galv. (4x).
110

Drawing shows Crane Eye 24 left.

≤ 15°
55
90

225
90

Load-bearing point
Permissible load: 20 180
700kg, at maximum 228 M10x110
angle of inclination
of 15°.

19
 Weight kg Item no.

Coach Screw DIN 571, galv.

Requires 13mm spanner
for additional connection of girders
to the end plates SRZ.

8x60, galv. 0,023 024270

8x80, galv. 0,027 024260

TSS-Torx, galv.
For Torx-Bits TX 30. Self-tapping.
For fixing formlining.

6x60 0,008 024470

6x80 0,010 024690

Double Headed Nail L = 65mm 1,00 018280

For securing Quick Strike Hook Straps. 75
Delivered in packs of 1000 pcs. 10

ø 3,1

Formwork Joint SSP 21/20 L = 2,50m 0,50 030260

Formwork Joint SSP 21/40 L = 3,00m 1,20 101706
Plastic. For easy stripping of shaft forms.
34 65

21

21
max 20 max 40

15
Chamfer Strip with Flange L = 2,50m 0,47 031200
Plastic.
15
20

2,7

126
Quick Release Corner SSE
For easy stripping of shaft forms.
150

150

It is recommended that the SSE

is removed immediately after
180

concreting.
300

SSE 100 32,20 025200

SSE 200 70,00 025210
SSE 300 105,00 025220
SSE 400 140,00 025230
1000
640

SSE 500 180,00 025240

SSE Special Length 35,00/m 025250
700

180
2000

150
700

21
150

235

Formlining 150mm
shorter than concrete.
300

235

20
 Weight kg Item no.
2.10
Scaffold Bracket GB 80 10,80 027110 -
Complete with: 2.20
Captive Locking Pin.
65 35

125
460

1050
Girder spacing
min 220

72 761

600
184

ø7

45
85

Permissible Load: 150kg/m2

Max. Allowable Spacing: 1,25m

Corner Scaffold Bracket

EGB 24-80 right 13,50 027060
Corner Scaffold Bracket
EGB 24-80 left 13,50 027070
Complete with:
Captive Locking Pin.

Drawing shows: EGB 24-80 R

120

Permissible Load: 150kg/m2

Allowable Spacing: 1,25m
460

1050

1650
50

ø7
70

85
92

21
 Weight kg Item no.

VARIO Platform 100x250* 154,00 105986

100x187,5 114,00 102920
100x100 82,70 103203
With 45mm thick platform.
* with VARIO Platform Handrail 80 (2x).

2327 (1702) (827) 1015

215 1897 877

470
1175
541
2480 (1855) (980) 1299
left

250
164 164
164
right

Permitted loading capacity: 150kg/m2

Accessories:
VARIO Platform Connector (4x) 4,05 100541
VARIO Platform Brace 167 (2x) or 8,38 101273
VARIO Platform Brace 246 (2x) 12,00 101269

VARIO Platform with 100x250* 155,00 105985

access hatch 100x125 97,90 102415
With 45mm thick platform and integrated,
self-closing, access hatch.
* with VARIO Platform Handrail 80 (2x).

2327 (1077) 1015

215 1897 877
470
1175
541

2480 (1230) 1299

250
164 164
645

164

690

Permitted loading capacity: 150kg/m2

Accessories:
VARIO Platform Connector (4x) 4,05 100541
VARIO Platform Brace 167 (2x) or 8,38 101273
VARIO Platform Brace 246 (2x) 12,00 101269

22
 Weight kg Item no.
2.10
VARIO External corner platform 62,80 103992
-
Wrap-around platform with pivoting 2.20
handrail and continuous 45mm
thick platform.
For external corners of 80° to 100°.

1040
Transport size 2190

1110

849
2125

Permitted loading capacity: 150kg/m2

VARIO End platform 35,00 103932

For stopend formwork.
Per stopend formwork and platform level (2x).

986
1020 275

Handrail for end platform VARIO 22,30 103865

With folding platform handrail 80 VARIO.
For wall thicknesses of up to 500mm.
Per end platform (1x).
1290
1288
140

23
 Weight kg Item no.

VARIO Platform beam left 15,80 105480

right 15,80 105484
For assembling VARIO filler platforms
with bolted boarding.

268
1299

175
268
1299

175
Accessories:
VARIO Platform Connector (2x) 4,05 100541
VARIO Platform Brace 167 (1x) or 8,38 101273
VARIO Platform Brace 246(1x) 12,00 101269
Handrail Post HSGP (1x) 3,54 034580

Platform Bracket VARIO VBK 90 9,40 105823

Complete with:
Pin ø 20x120 DIN 2341 Form B and
cotter pin 4/1 (1x).
1042
896

740

ø6

ø7
Permitted loading capacity: 150kg/m2
Maximum spacing: 1,25m
85

60

Accessories:
Handrail Post HSGP (1x) 3,54 034580

Handrail Post HSGP 3,54 034580

65
120

35
560

1050

1300

39

24
 Weight kg Item no.
2.10
VARIO Platform Connector 4,05 100541 -
For connecting the VARIO platform and 2.20
the platform brace to the VARIO panel.

190

132
82
4 x per VARIO platform

25
208

77
151
50

80

14

26
15
60

208

VARIO Platform Brace 167 8,38 101273

VARIO Platform Brace 246 12,00 101269
2 x per VARIO platform
Complete with:
pin ø 16x65 and
4/1 cotter pin (2x)

1726 (2518)
30 1576 (2368) 25
65

50
50
VARIO Platform Handrail 80 5,44 100813
Complete with:
pin ø 12x105 (2x) and
4/1 cotter pin (2x) ø12x105 FS 4/1 830
810
35
420

350

115

ø12x70 ø12x105 FS 4/1

20 50
880

20 60
35

Ladder 240-360 24,10 107738

Telescopic
56
38

50

94

2210-3710
350

300 180

25
 Weight kg Item no.

Culvert Frame Waler RKR Notes for ordering

RKR - Profile U100 22,00/m 022310 PERI Culvert Frame RKR:
RKR - Profile U120 28,00/m 022320 For ordering please use a copy of this page
RKR - Profile U140 33,00/m 022330 and add the necessary dimensions.
RKR - Profile U160 40,00/m 022340 The length of the outstand sections to the
RKR - Profile U180 45,00/m 022350 vertical walers (l = 236mm) must be included
to obtain the total length of frame required
Welding Unit for RKR 022460 Welding for the RKR (1 unit per vertical waler)
must be ordered separately.

Other profiles upon request.

Version with 2 Corner Spindles RKR.

A
C G 80 F 80 G C
C

H H

E
ø 26 ø 26
J
D

B
K
30
130

100

Structure Fabrication dimensions

dimensions Vertical Waler Horizontal Waler Adjusting Brace

A B C D E F G H J K
Culvert
frame Culvert Culvert Plywood = B - C - 134 = A-2C-2G-160
width height thickness

Profile U 100 361 340

Quantity (No)

Profile U 120 381 360

Quantity (No)

Profile U 140 401 380

Quantity (No)

Profile U 160 421 400

Quantity (No)

Profile U 180 441 420

Quantity (No)

Dimensions to be given in mm J / K = ordering dimension / average

extended length of spindle

26
 Weight kg Item no.
2.10
Culvert Frame Waler RKR Notes for ordering -
RKR - Profile U100 22,00/m 022310 PERI Culvert Frame RKR: 2.20
RKR - Profile U120 28,00/m 022320 For ordering please use a copy of this page
RKR - Profile U140 33,00/m 022330 and add the necessary dimensions.
RKR - Profile U160 40,00/m 022340 The length of the outstand sections to the
RKR - Profile U180 45,00/m 022350 vertical walers (l = 236mm) must be included
to obtain the total length of frame required
Welding Unit for RKR 022460 Welding for the RKR (1 or 2 per wall waler)
must be ordered separately.

Other profiles upon request.

Version with 1 Corner Spindle RKR.

A
C G 80 F G C
C

E
ø 26
J
D

B
K
30
130

100

Structure Fabrication dimensions

dimensions Vertical Waler Horizontal Waler Adjusting Brace

A B C D E F G H J K
Culvert
frame Culvert Culvert Plywood = B - C - 134 = A-2C-2G-80
width height thickness

Profile U 100 361 340

Quantity (No)

Profile U 120 381 360

Quantity (No)

Profile U 140 401 380

Quantity (No)

Profile U 160 421 400

Quantity (No)

Profile U 180 441 420

Quantity (No)

Dimensions to be given in mm J / K = ordering dimension / average

extended length of spindle

27
 Weight kg Item no.

Double Spindle RKR with Wheel 23,30 022380

Double Spindle RKR 20,60 022440
Complete with:
Hex. Bolt ISO 4017 M16x50-8.8, galv.,
ø 38
Hex. Nut ISO 4032 M16-8, galv. and 368
Washer 18 DIN 434, galv. (4x).
112
52

55
ø 26

70
710
150

90
115
30

30
130
ø 200 60

100
140

Bearing Capacity:
Double Spindle = 102.5kN when x = 170mm
52
Wheel = 6.0kN

Corner Spindle RKR 19,80 022410 80 300

Complete with:
F
Hex. Bolt ISO 4014 M16x45-8.8, galv.,
Hex. Nut ISO 4032 M16-8, galv. and
25

Washer 18 DIN 434, galv. (10x).

100 40 20

Load capacity F: 90kN

49
Order weldable
plate separately

76

45 150
112

Accessories:
Welding Plate 50x20x120 0,95 701991 120 20
50

20

ø 17

Adjustable Spindle RKR 12,30/m 022400

Complete with:
Pin ø 25x100 and Cotter Pin 4/1 (2x).

max L = J or K + 440mm - min L = J or K - 440

520 520
Tr 36x6
48

ø 25x100
FS 4/1

Only for bracing!

28
 2.10
-
2.20

29
30
2.40 Façade Formwork FTF

Page

103606 Anchor Bolt PERI MMS 20x130 35

106000 Base Plate-2 for RSS 35
105905 Cable 2-Strands Ø=10mm, L=4.0m 35
2.40
103938 Corner Coupling EKZ 47/43 36
027070 Corner Scaffold Bracket EGB 80, left 37
027060 Corner Scaffold Bracket EGB 80, right 37
723910 Crane Eye A18 32
017020 Double Coupler NK 48/48, galv. 34
103981 FTF 500 Bracket 32
104195 FTF Assembly Device 34
103949 FTF Bracket with Spindle 33
104744 FTF Clamp 33
104018 FTF End Guardrail, complete 37
103946 FTF Platform 36
103945 FTF Spindle Guide 33
104070 FTF Spindle Guide with Spindle 33
103942 FTF Tie Plate DW 15, complete 36
104017 FTF Tie Unit 65, complete 36
104083 FTF Waler Coupler 33
103944 FTF Waler Coupler w. Brace Connector 33
104803 FTF Wrench SW 38/1500 34
105822 Pin Ø 20x102, galv. 33
028020 Push-Pull Prop RSS II 35
027110 Scaffold Jack GB 80 37
026412 Scaffold Tube, Steel 48.3x3.2, galv. l=2.0m 34
026413 Scaffold Tube, Steel 48.3x3.2, galv. l=3.0m 34
103868 Steel Waler Universal SRU U120 l=0.72m 34
103871 Steel Waler Universal SRU U120 l=0.97m 34
103889 Steel Waler Universal SRU U120 l=1.97m 34
103943 Steel Waler Universal SRU U140 l=4.97m 32
024240 Wedge KZ, galv. 36

31
 Weight kg Item no.

FTF 500 Bracket 314,00 103981

Complete with:
Universal Steel Waling SRU U140, L=4,97m, (1x)
FTF Spindle Guide with Spindle (1x),

338
FTF Spindle Guide (2x),
FTF Waling Coupling (2x), FTF Waling Coupling
1300
with Prop Connection (1x),
Standard Coupling NK 1 (4x),
FTF Adjusting Bracket with Spindle (2x)
and Crane Eye A 18 with Fixing (1x).

4970
min. 1300

Universal Steel Waling SRU 497 U140 158,00 103943

Powder coated, red.

172 50 7 x 60 = 420
60
52 46
37 53
140

48 125 n x 125
4970

21 100

5
724

115

200 65 65 65
724
605

Accessories for SRU 497 U 140:

36 70

Crane Eye A18 0,80 723910

Hex. Bolt ISO 4014 M20x90-8.8, galv. (1x) 0,34 710226
Hex. Nut ISO 7042 M20-8, galv. (1x) 0,065 781053

32
 Weight kg Item no.

FTF Bracket with Spindle 61,80 103949

Complete with:
Pin ø 20x102 (2x) and
Cotter Pin FS 4/1 (2x) min. 35 80 150 2.40
max. 670

38
220
SW36
250
B20

125 max. 310

200
338

1125
33

200
200
SW36

791 302
968

FTF Waling Coupling 5,66 104083

FTF Waling Coupling with Prop Connection* 6,37 103944

ø 48,3

ø 48,3
Complete with:

201

201
125

125
Pin ø 20x102 (3x).
*Pin ø 16x42 (1x) and
72
Cotter Pin 4/1 (3x), *(4x)

344 408

170
48

20
48
FTF Spindle Guide with Spindle 5,56 104070
For adjusting the upper precast concrete FinPly 21mm
and for connecting scaffold couplings. 82 max. 235 150
Complete with:
Pin ø 20x102 (2x) and
Cotter Pin FS 4/1 (2x)
184
125

526

FTF Spindle Guide 1,89 103945 52

For connecting scaffold couplings.
Complete with:
Pin ø 20x102 (2x) and
ø42

Cotter Pin FS 4/1 (2x)

125
175

235

FTF Clamp 7,13 104744

Alternative fixing of the upper prefabricated 800 103
concrete. Complete with:
Pin ø 20x102 (2x) and
Cotter Pin FS 4/1 (2x)
237

Prefab. section
d= max. 400

33
 Weight kg Item no.

Universal Steel Waling SRU

120mm section
coated with red powder
Standard lengths for FTF units and 51 7 x 60 = 420
column formwork. 55 52 55 60
46
SRU 72 18,20 103868 ø 21
SRU 97 24,40 103871

37 53
120
SRU 197 51,00 103889
48 125 n x 125

70 510 70

722

70 760 70

972

70 535 70 550 70 535 70

See the VARIO range for other lengths 1972

of SRU steel walings.

Standard Coupling NK 48/48mm, galv. 1,10 017020

Width across flats 19mm

Scaffold Tube Steel, ø 48,3x3,2, galv.

L = 2,00m 7,10 026412
L = 3,00m 10,70 026413

FTF Assembly Device 8,92 104195

As assembly aid for the basic assembly of
the façade formwork.
345

80 1400

FTF Wrench SW 38/1500 2,77 104803

For easily adjusting the top adjusting
brackets from the ground.

SW 38 SW 36

ø 18
1524

34
 Weight kg Item no.

Push-Pull Props RSS II L = 2,91-3,80m 21,70 028020

2.40

36
71
40 2775
ø 16
ø 16

10
15

ø 70
Extended length [m] 2.91 3.00 3.25 3.50 3.80

Permiss. tension and

compr. force [kN] 30 30 25 19 13

Base Plate-2 for RSS, galv. 1,81 106000

Complete with:
Pin ø 16x42 and Cotter Pin 4/1 (1x). 60 ø 11
65
ø 21

100
80

60
10
67

12
30 70 30
150

Anchor Bolt PERI MMS 20x130 0,33 103606

For erecting props etc. without plugs.
Can be used several times. SW 30

130

Drill depth
min. 140
Use 18mm drill to 20

DIN 8035 !

Cable 2-Strands Ø=10mm, L=4,0m 11,0 105905

0
. 400
app.

≤ 45°

700 kg 700 kg

35
 Weight kg Item no.

Corner Coupling EKZ 47/43 8,87 103938

For continuous connection of steel walings

44
on façade formwork with column formwork.
468

20

80
46
32

428
80

Accessories:
KZ Wedge (4x) 0,85 024240

FTF Tie Unit 65, complete 5,72 104017

For tying the column formwork
Complete with:
B15
SKZ Tie Yoke (1x) and
DW 15 Wing Nut, galv. (1x)

40

92
83
595

717

Accessories:
KZ Wedge (1x) 0,85 024240
Pin ø 20x102 (1x) 0,24 105822
Cotter Pin FS 4/1 (1x) 0,030 018060

FTF Tie Plate DW 15 complete 5,54 103942 DW15

For tying the column formwork
in the area of the breast wall/parapet. 57
Complete with:
80
Pin ø 20x102 (2x) and
Cotter Pin FS 4/1 (2x) 226
57

102

125

FTF Platform 180 x 60 19,70 103946

39mm Kerto blockboard panel to form a
working scaffold for integrated
column formwork.
ø9
600

1800

Accessories:
F.H. Bolt DIN 603 M6x60 MU, galv. (4x) 0,03 104146
Washer ISO 7093-1-08-200 HV, galv. (4x) 0,01 710342

36
 Weight kg Item no.

FTF End Guardrail with Holder 11,70 104018

ø6
2.40

460
150 860

Accessories:
Double Headed Nail L = 65mm 1,00 018280

Corner Scaffold Bracket

EGB 24-80 right 13,50 027060
Corner Scaffold Bracket

120
EGB 24-80 left 13,50 027070
For assembling concreting scaffold with
integrated support framework.

460

1050

1650
Drawing shows: EGB 24-80 R ø7 50
70

Permissible Load: 150kg/m2 85

92

Allowable Spacing: 1,25m

Scaffold Bracket GB 80 10,80 027110

65 35
For larger cross-sections with integrated
column formwork.
125
460

1050

Girder spacing
min 220

72 761
600

184

ø7

150kg/m2
45
85

Permissible Load:
Max. Allowable Spacing: 1,25m

37
38
3.10 Articulated Waler GRV 3.20 RUNDFLEX

Page Page

021240 Adjustable Bolt STS 260, galv. 41 021610 Adjustable Spindle 210, galv. 47
021250 Adjustable Bolt STS 360, galv. 41 021620 Adjustable Spindle 500, galv. 47
021150 Articulated Spindle Waler GSRV 65-90 40 021620 Adjustable Spindle 500, galv. 47
021140 Articulated Waler GRV 30 40 023940 Alignment Coupler 38, galv. 48
021130 Articulated Waler GRV 60 40 023500 Alignment Coupler BFD, galv. 48
021120 Articulated Waler GRV 75 40 726055 Betoplan Strip 4x20x2500mm 49
021110 Articulated Waler GRV 90 40 700485 Betoplan Strip 8x20x2500mm 49 3.10
021270 Bearing Block GRV, left 41 021980 Crane Eye 24, left 49 -
021280 Bearing Block GRV, right 41 021990 Crane Eye 24, right 49 3.20
022230 Cotter Pin 5/1, galv. 41 070760 Crane Splice 24 48
021260 Half Round Washer HRS, galv. 41 021630 Distribution Waler 47
022250 Hex. Nut ISO 4032 M24-8, galv. 41 021650 Edge Girder Strap, galv. 46
021160 Hook Spanner HKS for GRV 40 021720 Edge Profile 60, left 45
022210 Pin for GRV, galv. 41 021710 Edge Profile 60, right 45
021290 Spindle Connector GRV 41 021700 Edge Profile 120, left 45
021680 Edge Profile 120, right 45
021740 Edge Profile 240, left 45
021730 Edge Profile 240, right 45
021450 Edge Profile 300, left 45
021440 Edge Profile 300, right 45
021760 Edge Profile 360, left 45
021750 Edge Profile 360, right 45
024480 Extension Splice 24-2 48
075090 Girder GT24 l=0.60m RF 45
075120 Girder GT24 l=1.20m 45
075240 Girder GT24 l=2.40m 45
075300 Girder GT24 l=3.00m 45
075360 Girder GT24 l=3.60m 45
028050 Girder Headpiece GT 24, galv. 50
028070 Girder Headpiece GT 24/A, galv. 50
020830 Inside Panel I 72x120 44
020850 Inside Panel I 72x240 44
020870 Inside Panel I 72x300 44
020890 Inside Panel I 72x360 44
021910 Inside Panel I 123x 60 43
021930 Inside Panel I 123x120 43
102853 Inside Panel I 123x120 2R 43
021950 Inside Panel I 123x240 43
021430 Inside Panel I 123x300 43
021970 Inside Panel I 123x360 43
021810 Inside Panel I 240x 60 42
021830 Inside Panel I 240x120 42
102855 Inside Panel I 240x120 2R 42
021850 Inside Panel I 240x240 42
021410 Inside Panel I 240x300 42
021890 Inside Panel I 240x360 42
020820 Outside Panel O 85x120 44
020840 Outside Panel O 85x240 44
020860 Outside Panel O 85x300 44
020880 Outside Panel O 85x360 44
021900 Outside Panel O 128x 60 43
021920 Outside Panel O 128x120 43
102854 Outside Panel O 128x120 2R 43
021940 Outside Panel O 128x240 43
021420 Outside Panel O 128x300 43
021960 Outside Panel O 128x360 43
021800 Outside Panel O 250x 60 42
021820 Outside Panel O 250x120 42
102856 Outside Panel O 250x120 2R 42
021840 Outside Panel O 250x240 42
021400 Outside Panel O 250x300 42
021880 Outside Panel O 250x360 42
098217 Radius Template E85/I72 49
099540 Radius Template O250/I240, O128/I123 49
021790 Ratchet Spanner SW 24 "Combi" 49
027110 Scaffold Jack GB 80 50
710262 Selftapping Screw 5.5x45 TX 30, galv. 49
021660 Strap 24 for RUNDFLEX, galv. 46
024690 TSS-Torx 6x80, galv. 49
021600 T-Waler 46
021580 T-Waler 800 46
021640 Waler Bolt for RUNDFLEX, galv. 47

39
Articulated Waler GRV
Weight kg Item no.

Articulated Waler GRV

For tie-less circular formwork. Fully
adjustable to suit minimum radii stated.
Connected to GT 24 Girder with
Hook Strap HB 24. GRV 90 GRV 75 GRV 60 GRV 30
GRV 30 18,20 021140 A 900 750 600 300
GRV 60 24,60 021130 B 770 620 470 170
GRV 75 21,20 021120 min r. 1.80m 1.50m 1.20m 0.60m
GRV 90 30,90 021110

A
65 B

116 39

U 100
ø 21 ø 40
88
152

82
70

left right

Custom lengths and connection-pieces

Tension and Compression Load: 400kN available on request.

Articulated Adjustable Waler GSRV 65-90 50,10 021150

For closing a ring of GRV walers.
Adjustment range 650 to 900mm. Connected
to GT 24 Girder with Hook Strap HB 24. 650-900

200 ø 40
116 39

88
40 60 40

140

Tension and Compression Load: 400kN

Hook Spanner HKS for GRV 2,60 021160

Tool for Adjustable Waler GSRV 65-90.
105
40

385
18

40
 Weight kg Item no.

Accessories per GRV and GSRV 65-90:

➀ Adjustable Bolt STS 360, galv. (1x) 1,20 021250

➀ Adjustable Bolt STS 260, galv. (1x) 0,90 021240 360/260
➁ Hex. Nut ISO 4032 M24-8, galv. (4x) 0,10 022250 10
➂ Half Round Washer HRS, galv. (4x) 0,20 021260

3.10
➀ M24 -
➁ SW 17 15
3.20
58
8

44
➂ ø 25

SW 36

Pin for GRV, galv. 1,94 022210

For the connection of both GRV
and GSRV Walers. 200
148

ø 40
ø6

Cotter Pin 5/1, galv. 0,033 022230

For Pins ø 25-40mm

ø5

Bearing Block GRV, left 15,20 021270

Bearing Block GRV, right 15,60 021280 70 82
150

200 200 200

left right
left right

Spindle Connector GRV 4,90 021290

For connecting 1 or 2 compression braces.
190 100
40

90

ø 22
10
50

90

ø 21
35 100 35

41
RUNDFLEX Panels
Weight kg Item no.

625 1250 625 tie holes with

RUNDFLEX Panels for Radii ≥ 4,0m
Distribution Waler
Plywood: 21mm.
Panels without Distribution Waler

Outside Panels
A 250x 60 Panel with Crane Eye 24 (2x) 131,00 021800 220 230 380 230 380 230 380 230 220
A 250x120 Extension panel 181,00 021820 335 610 610 610 335 tie holes without
A 250x120 2R 241,00 102856 Distribution Waler
A 250x240 358,00 021840 A 2500
A 250x300 432,00 021400
A 250x360 533,00 021880
I 2400
Inside Panels 324 584 584 584 324 tie holes without
I 240x 60 Panel with Crane Eye 24 (2x) 127,00 021810 Distribution Waler
I 240x120 Extension panel 173,00 021830 209 230 354 230 354 230 354 230 209

I 240x120 2R 227,00 102855

I 240x240 343,00 021850
I 240x300 416,00 021410
I 240x360 510,00 021890
600 1200 600 tie holes with
Distribution Waler

25
620
442
47
50

A 2500

I 2400
25

2994
1776
296

1218
460
27

A 2500

I 2400

460
25

27
A 2500

I 2400
296

1218

25
460
27

A 2500

I 2400
25

1184

3586
2402
1184

1184
460

460
27

A 2500
27

A 2500
I 2400
I 2400

42
 Weight kg Item no.

640 640 tie holes with

RUNDFLEX Panels for Radii ≥ 2,5m
Distribution Waler
Plywood: 18mm
Panels without Distribution Waler

Outside Panels
A 128x 60 Panel with Crane Eye 24 (2x) 74,50 021900 210 250 380 250 210
A 128x120 Extension panel 102,00 021920 tie holes without
335 610 335
A 128x120 2R 134,00 102854 Distribution Waler 3.10
A 128x240 200,00 021940 A 1280 -
A 128x300 248,00 021420 3.20
A 128x360 298,00 021960
I 1232
Inside Panels tie holes without
324 584 324
I 123x 60 Panel with Crane Eye 24 (2x) 73,10 021910 Distribution Waler
199 250 354 250 199
I 123x120 Extension panel 97,10 021930
I 123x120 2R 126,00 102853
I 123x240 190,00 021950
I 123x300 239,00 021430
I 123x360 283,00 021970
616 616 tie holes with
Distribution Waler

25
620
443
47
50

A 1280

I 1232
25

2994
1776
296

1218
460
27

A 1280
460

I 1232
25

27

A 1280

I 1232
25
296

1218
460
27

A 1280

I 1232
25

1184

3586
2402

1184
1184

460
460

27
27

A 1280 A 1280

I 1232 I 1232

43
 Weight kg Item no.

RUNDFLEX Panels for Radii ≥ 1,0m 425 425 tie holes

Plywood: 2x9mm

Outside Panels
A 85x120 96,30 020820
A 85x240 142,00 020840 250 350
A 85x300 180,00 020860 A 850
A 85x360 211,00 020880

Inside Panels
I 722
I 72x120 76,00 020830
241 240 241
I 72x240 118,00 020850
I 72x300 155,00 020870
I 72x360 176,00 020890

360 361 tie holes

25
25
296

1218
460
27

A 850

2994
I 722

1776
25

460
27
2402

A 850
1184

I 722
25
460
27

A 850

I 722
1184

3586
1184
460
27

A 850

I 722

44
RUNDFLEX Accessories
Weight kg Item no.

GT 24 Girder
German Approval
Certificate No. Z-9.1-157

Perm. Shear Force QD = 14,0kN*

Perm. Shear Force QZ = 13,0kN** 163 296
Perm. Bending Moment M = 7,0kNm
Moment of Inertia Iy = 8000cm4 3.10
* QD = Permiss. shear force on -
compression struts 3.20
**QZ = Permiss. shear force on
tension struts
311

60
240
120
60
28

80

Nominal Lengths for RUNDFLEX Panels

GT 24 Girder L = 0,60m RF 4,45 075090
GT 24 Girder L = 1,20m 7,10 075120
GT 24 Girder L = 2,40m 14,20 075240
GT 24 Girder L = 3,00m 17,70 075300
GT 24 Girder L = 3,60m 21,20 075360

Edge Profile
For panel connection with BFD Alignment
Coupler or Alignment Coupler 38.
360
120

ø 36
60 right 6,02 021710
40

80

60 left 6,02 021720

120 right 10,70 021680 31 34 40
120 left 10,70 021700 105 300
240 right 19,20 021730
240 left 19,20 021740
300 right 31,60 021440
300 left 31,60 021450
360 right 28,40 021750
240
360 left 28,40 021760
1184

3585
2993
1776

120
2401

1184
1184

60
296

1217
48

619

487

487

487

487
487

50

45
 Weight kg Item no.

T-Waler 9,03 021600 23

To support 2 GT 24 Girders.

83 150

340
105
27 43
160 45
ø 36
27

50 52 50
465

T-Waler 800 14,70 021580

To support 2 GT 24 Girders
23
on External Panel Type A 85.

83 250

340
105
27 43
ø 36 328 45 27

50 52 50

800

RUNDFLEX Strap 24, galv. 0,33 021660

For fixing GT 24 Girders to T-Waler
or T-Waler 800.
102 44
M8x100
DIN 603

Spare Bolt:
F.H. Bolt M8x100 MU DIN 603, galv. 0,05 710240

Edge Girder Strap, galv. 1,41 021650

For fixing the outermost GT 24 Girders M8x100
on External Panels. DIN 603
Not required for External Panels h = 0,60m.
120
10

65
42

32
110
135

Spare Bolt:
F.H. Bolt M8x100 MU DIN 603, galv. 0,05 710240

46
 Weight kg Item no.

Adjustable Spindle 210, galv. 2,70 021610

With self-cleaning hexagonal thread.
For adjustment of Internal Panels and
Edge Profiles to all Panels.
Complete with:
250
Cotter Pin 5/1 (2x).
ø 40 30 90 SW 24

3.10
-

125
3.20

75
FS 5/1

ø 35

min. 70
max. 210
Requires 24mm spanner

Adjustable Spindle 500, galv. 3,70 021620

With self-cleaning hexagonal thread.
For adjustment of External Panels
and for panel joint to all Panels.
Complete with:
Cotter Pin 5/1 (2x).
500
ø 40 180 160 SW 24

125

75 FS 5/1
ø 35

min 220
max 460

Requires 24mm spanner

Distribution Waler 18,00 021630

For distribution of tie forces to two
adjacent T-Walers.
Halves the number of ties required.

770 200
690 100
50 45 50
60
37

150

590

Waler Bolt, galv. for RUNDFLEX 1,23 021640

For fixing of Distribution Waler to T-Waler. ø 40
Complete with:
Cotter Pin 5/1 (1x)
150
75

100

FS 5/1
ø 35

47
 Weight kg Item no.

Alignment Coupler BFD, galv. 4,05 023500

For connection of TRIO and RUNDFLEX Panels.
Filler width up to 100mm.

260

60
64
Alignment Coupler 38, galv. 6,08 023940

51
52
For connection of RUNDFLEX Panels.
Filler width up to 260mm.
25
Clamping length 1-220mm

60
164

58
288

Clamping length 1-380mm

434
Permissible tension load: 20kN.

Crane Splice 24 3,92 070760

Minimum two per formwork unit. 60
Complete with:
Pin ø 16x65/86 and Cotter Pin 4/1 (1x).
Follow Instructions for Use.

110
35
59

31
≤ 15°
ø 16x65/86

648
FS 4/1

30 25

117
Safe working load: 700kg,
with legs of sling at ≤ 15° to the vertical.

Extension Splice 24-2 7,18 024480

For height extension of formwork panels or
RUNDFLEX Panels with GT 24 Girders up
to a height of 8,0m.
Complete with:
Triple Wingnut (2x)
850
626

M permiss. = 1,73kNm
Q permiss. =0
or:
M permiss. =0
Q permiss. = 5kN 28
122

Extension Splices 24-2 are required

to each girder joint in RUNDFLEX Panels.

48
 Weight kg Item no.

Crane Eye 24, right 2,80 021990

Crane Eye 24, left 2,80 021980
RUNDFLEX Panels h = 600mm are supplied
complete with a pair of Crane Eyes 24.
Complete with:
60
Hex. Bolt M 10x110 DIN 931-8.8 galv.,
Washer R 11 DIN 440 galv. and
Hex. Nut M 10 DIN 985-8 galv. (4x). 3.10

110
Drawing shows Crane Eye 24 left. -
3.20
≤ 15°

55
90

225
90
Safe working load:
700kg, at maximum
angle of inclination
20 180
of 15°.
228 M10x110
DIN 931-8.8

Ratchet Spanner SW 24 "Combi" 1,00 021790

24mm spanner.
Length approx. 500mm.

TSS-Torx 6x80, galv. 0,01 024690

For Torx-Bits TX 30. Self-tapping. Torx 30
40
ø 12

80 ø6

Self tapping Screw ISO 15482 5.5x45, galv. 0,007 710262

For Torx-Bits TX 30. For fixing edge 45

profiles to the plywood.

ø 11,5

ø 5,5

Torx 30

Betoplan Strip 4x20x2500mm 0,13 726055

Betoplan Strip 8x20x2500mm 0,31 700485
For tacking to Girder GT 24.

Plywood Fin-Ply 21mm, 18mm, 9mm upon request

Cut to size and edge sealed.

Template RUNDFLEX, plywood

Each Template can be used for External
and Internal Panels.
internal radius external radius
Customised for particular project.
Template A 250, I 240, A 128, I 123 099540
external radius
Template A 85, I 72 098217 internal radius

49
 Weight kg Item no.

65 35
Scaffold Bracket GB 80 10,50 027110
Complete with:
Captive Locking Pin.

125
460

1050
Girder spacing
min 220
72 761

600
184

104

45
Permissible load: 150kg/m2
Permissible spacing: 1,25m

Girder Headpiece 24, galv. 4,48 028050

For fixing Push-Pull Props
and Kicker Braces to the GT 24 Girder.
136 145
Complete with:
Pin ø 16x42 and Cotter Pin 4/1 (1x). 40 14

170
100
60

ø 16x42 min 40
FS 4/1
max 100

Girder Headpiece 24/A, galv. 4,64 028070

For fixing Push-Pull Props
and Kicker Braces to the GT 24 Girder
when extended with Extension Splice 24
Complete with:
Pin ø 16x42 and Cotter Pin 4/1 (1x).
145

30 15
170

ø 16x42
FS 4/1
max 100
min 52

155

50
 3.10
-
3.20

51
52
4.10 TRIO

Page Page

027680 Adapter SB-1,2 - TRIO/DOMINO 69 023080 Stopend Panel TRIO MTF 120x24/25 61
023500 Alignment Coupler BFD, galv. 64 023078 Stopend Panel TRIO MTF 120x30 61
Articulated Corners TGE 59 023079 Stopend Panel TRIO MTF 120x35/36 61
106126 Base Spindle TRH 75 023074 Stopend Panel TRIO MTF 270x20 61
023660 Brace Connector TRIO , galv. 67 023075 Stopend Panel TRIO MTF 270x24/25 61
Bracings 74 023077 Stopend Panel TRIO MTF 270x30 61
023640 Bulkhead Tie TS, galv. 65 023076 Stopend Panel TRIO MTF 270x35/36 61
023550 Compensation Waler TAR 85 64 054518 Struts TRP 74
022950 Concreting Platform TRIO 120x270 70 023630 Top Tie Bracket-2 AH, galv. 68
025740 Connector SB-A,B,C - TRIO/DOMINO 69 023920 Universal Waler 245 67
107021 Corner Handrail TRP 73 023551 Waler 85 64 4.10
107009 Corner Platform TRP 73 023930 Waler Stop 67 -
054519 End Handrail TRP, foldable 72 Wall Thickness Compensations WDA 63 4.40
054517 Erection Device TRP 200, 10 kN 74
Filler Plates 62
Filler Profiles TPP 63
023800 Foundation Strap TRIO 68 4.20 TRIO-L Alu
023010 Foundation Tie Clamp TRIO TLS 68
101592 Handrail Post Holder TRIO 71
034580 Handrail Post HSGP 71 Corners Alu TAE 76-77
107793 Hinged Step TRP 75 023860 Multipurpose Panel Alu TAM 270x72 76
023650 Hook Tie DW 15/400, galv. 65 023980 Multipurpose Panel Alu TAM 90x72 77
023820 Hook Tie Head DW 15, galv. 65 Panels Alu TRA 90 77
022840 Inside Corner TE 60 58 Panels Alu TRA 270 76
022660 Inside Corner TE 120 59
022580 Inside Corner TE 270 59
103284 Internal Corner TEI 120/135° 60
103317 Internal Corner TEI 270/135° 60 4.30 TRIO 330
750343 Kicker TRP 118 74
107738 Ladder 240-360 75
106608 Landing with Ladder TRH 90 75 054414 Articulated Corner TGE 330 80
044770 Lifting Gear -3 TRIO 66 054384 Filler Plate LA 330x36 80
044760 Lifting Gear Combi -2 TRIO 66 101829 Filler Profile TPP 330, Alu 81
023690 Lifting Hook 1,5t 66 101846 Filler Profile TPP 330/27, Alu 81
023440 Lifting Pin TRIO 65 054430 Filler Support TPA 330 81
022630 Multipurpose Panel TRM 120x72 57 054374 Inside Corner TE 330 80
022540 Multipurpose Panel TRM 270x72 55 054344 Multipurpose Panel TRM 330x72 79
103330 Outside Corner TEA 120/135° 60 Panels TR 330 78-79
103337 Outside Corner TEA 270/135° 60 105525 Shaft Panel TSE 330 81
Panels TR 60 58 023050 Stopend Panels TR 330x24 81
Panels TR 120 56-57 Wall Thickness Compensations WDA 330 80
Panels TR 270 54-55
023020 Perforated Foundation Tie 68
027690 Pin Ø 19x165, galv. SB-TRIO 69 4.40 TRIO Structure
Platforms TRP 72
030300 Plug Ø 20/24mm 67
023560 Projection Waler TVR 45/45 64 023301 Articulated Corner TSGE 120 82
Push-Pull Props TRP 74 023201 Articulated Corner TSGE 270 82
107019 Retainer Corner Platform TRP 73 Corners TRIO Structure TSE 82
023670 Scaffold Bracket TRG 80 70 Multipurpose Panels TRIO Structure TSM 82
023590 Scaffold Bracket TRG 100/112 71 Panels TRIO Structure TS 120 82
023680 Scaffold Bracket TRG 120 70 Panels TRIO Structure TS 270 82
026647 Screw Plate DW 15/115, galv. 73 Panels TRIO Structure TS 330 82
105524 Shaft Panel TSE 120 60 Wall Thickness Compensations WDAS 120 83
105523 Shaft Panel TSE 270 60 Wall Thickness Compensations WDAS 270 83
750303 Stacking Aid TRIO DW 20 65 Wall Thickness Compensations WDAS 330 83
023390 Stacking Device TRIO, galv. 65
023030 Stopend Panel TR 120x24 62
023040 Stopend Panel TR 270x24 62
023067 Stopend Panel TRIO AT 120x3 61
105978 Stopend Panel TRIO AT 120x5 61
023060 Stopend Panel TRIO AT 270x3 61
105953 Stopend Panel TRIO AT 270x5 61
023068 Stopend Panel TRIO MT 120x20 61
023069 Stopend Panel TRIO MT 120x24/25 61
023071 Stopend Panel TRIO MT 120x30 61
023072 Stopend Panel TRIO MT 120x35/36 61
023061 Stopend Panel TRIO MT 270x20 61
023062 Stopend Panel TRIO MT 270x24/25 61
023064 Stopend Panel TRIO MT 270x30 61
023065 Stopend Panel TRIO MT 270x35/36 61
023081 Stopend Panel TRIO MTF 120x20 61

53
TRIO Steel Panels, h = 2,70m
Weight kg Item no.

Panel TR 270x240 = 6,48m2 329,00 022570

Fitted with 18mm Finply formlining.

2400

300 600 600 600 300

150
300

575
300
300
ø 24

300
2700

300
ø 24

150

300
75

300
75 680
ø 24
300

575
300

150
120

150 100 100 150

540 1320 540

ø 27

Detail:
The tapered tie hole allows
120

the tie to be angled at 6° in

Levering corner any direction.

Panel TR 270x120 = 3,24m2 159,00 022510

Panel TR 270x30 = 0,81m2 52,90 022560
Fitted with 18mm Finply formlining.

1200

300 300 300

ø 24
2700
2700
120

ø 27

Detail:
The tapered tie hole allows
the tie to be angled at 6° in
any direction.
25 25

Levering corner Also with levering corner as

from the year 2002

54
 Weight kg Item no.

Panel TR 270x90 = 2,43m2 112,00 022520

Panel TR 270x60 = 1,62m2 80,30 022550
Fitted with 18mm Finply formlining.

900 600

300 300 300

4.10
-
4.40

2700
2700

Also with levering corner as

from the year 2002

Panel TR 270x72 = 1,94m2 89,20 022530

Multi Panel TRM 270x72 = 1,94m2 93,80 022540
ø 24
For external corners, for oblique
angles, wall junctions, stopends etc..
Fitted with 18mm Finply formlining.
Complete with:
Plug 20/24 (44x)

30 30
30 30 30
25 49

720 720

300 300 150

300

575
37
600

23
300
2700

2700

300
300

ø 24
600

575
300

150

Also with levering corner as Levering corner 25 25

from the year 2002
150 150

55
TRIO Steel Panels, h = 1,20m
Weight kg Item no.

Panel TR 120x240 =2,88m2 160,00 022514

Fitted with 18mm Finply formlining.

2400
300 600 600 600 300
150

25

150
200

300
300
1200
800

300
300
200
540 1320 540

120

Panel TR 120x120 =1,44m2 67,90 022600

Fitted with 18mm Finply formlining.

1200

300 300

25

150
300
300
1200

300

325
300

150

25 25

Panel TR 120x90 =1,08m2 52,80 022610

Fitted with 18mm Finply formlining.
900

300 300
1200

56
 Weight kg Item no.

Panel TR 120x72 =0,86m2 43,50 022620

Multi Panel TRM 120x72 =0,86m2 51,90 022630
For external corners, for oblique ø 20

angles, wall junctions, stopends etc.

Fitted with 18mm Finply formlining.
Complete with:
Plug 20/24 (44x)

30
25 30 30
49
720

300
720 4.10
300 -
4.40

30
150
37
300

867
300
ø 24

1200
1200

37
600

23

333
150
25 25

150 150

Panel TR 120x60 =0,72m2 39,50 022640

Fitted with 18mm Finply formlining.

600

300
1200

Panel TR 120x30 =0,36m2 24,90 022650

Fitted with 18mm Finply formlining.

300
1200

57
TRIO Steel Panels, h = 0,60m
Weight kg Item no.

Panel TR 60x90 = 0,54m2 31,40 022790

Fitted with 18mm Finply formlining. 900
300 300 300

300
600
300
120
TRIO TR 60x60 panel = 0,36m2 24,20 022810
Fitted with 18mm Finply formlining.

600
300

600
Panel TR 60x30 = 0,18m2 14,60 022820
Fitted with 18mm Finply formlining.

300

600

Panel TR 60x72 = 0,43m2 26,30 022800

Fitted with 18mm Finply formlining.

720
300
600

Inside Corner TE 60-2 = 0,36m2 18,00 022840 300

35
Fitted with 18mm Finply formlining.
35
300
600

300
120
300

58
 Weight kg Item no.

Inside Corner TE
For 90° inside corners.
Fitted with 18mm Finply formlining.

TE 270-2 = 1,62m2 70,50 022580

300
TE 120-2 = 0,72m2 33,50 022660
35

120
300
300
575

300
4.10
-

300
4.40

300
300
35

2700

300

35

300
300

865

300
300
ø 24

1200
ø 24

300
300
575

333
300
300

Articulated Corner TGE

For oblique angles from 75°.
Can be used internally and externally.
To be used as a 90° inside corner 584
with TVR 45/45 Offset Waler.
Fitted with Steel formlining. 292 33 ≥ 75°

TGE 270 = 1,62m2 94,80 023200

120

TGE 120 = 0,72m2 43,60 023300

300

575

300
300
300

300
300

584

292 33
2700

300

33
300

300
300
300

1200

x ø 24

ø 24
300

300
575

333
300
300

Detail x
ø 24

33 30
30 30

59
 Weight kg Item no.

Shaft Panel TSE 270 = 0,27m2 124,00 105523

Shaft Panel TSE 120 = 0,12m2 69,30 105524
For lifting complete internal formwork
in shafts. Height extendable.
Complete with:
Pin 20x140, galv. and
Cotter Pin 4/1 (7x or 5x). Shuttered

100

300

1200
455
100

1560

2700
Struck

900
1200
55

600
25

632

569
297

297
600/720/900/1200 panel

300mm panel

Load-bearing point
Permissible load: 2000kg

Panel 135° Corner

for forming 135° corners.

Internal Panel TEI 270/135° 58,10 103317

TEI 120/135° 29,40 103284

External Panel TEA 270/135° 76,00 103337

TEA 120/135° 35,00 103330

33

290
300
120

575
0
29

300

135°
300

190
300
0
19

120

33
2700

300

135°
33

300
300

300
300

1200
240

300
300
575

333
300

300

135°

60
 Weight kg Item no.

Stopend Panel Wall thickness d [cm]

b Concrete cover approx. 25mm Concrete cover approx. 50mm
H = 2,70m [mm] 20 24/25 30 35/36 24/25 30 35/36 40
AT 270x3 15,90 023060 – 2 2 2 2
AT 270x5 17,40 105953 – 2 2 2 2
without water bar without water bar
MT 270x20 27,50 023061 118 1 1
MT 270x24/25 31,00 023062 158 1 1
MT 270x30 37,30 023064 218 1 1
MT 270x35/36 42,30 023065 268 1 1
with water bar with water bar
MTF 270x20 29,50 023074 118 1 1 4.10
MTF 270x24/25 33,90 023075 158 1 1 -
MTF 270x30 39,00 023077 218 1 1 4.40
MTF 270x35/36 43,00 023076 268 1 1

H = 1,20m
AT 120x3 7,17 023067 – 2 2 2 2
AT 120x5 7,84 105978 – 2 2 2 2
without water bar without water bar
MT 120x20 12,30 023068 118 1 1
MT 120x24/25 14,00 023069 158 1 1
MT 120x30 16,80 023071 218 1 1
MT 120x35/36 19,00 023072 268 1 1
with water bar with water bar
MTF 120x20 14,30 023081 118 1 1
MTF 120x24/25 14,90 023080 158 1 1
MTF 120x30 17,00 023078 218 1 1
MTF 120x35/36 18,80 023079 268 1 1

Without water bar MT With water bar MTF

MT MTF
AT AT

MT MTF
AT AT

Without water bar With water bar

c

c
d

d
b

b
c

Concrete cover c c = d – b – ø of reinforcing bar.

2

61
 Weight kg Item no.

Stopend Panel 24
For 240mm thick walls.
Can also be used as a wall panel.
Fitted with 18mm Finply formlining.

TR 270x24 = 0,65m2 44,00 023040

240
TR 120x24 = 0,29m2 20,60 023030

575
900
240

25

2700
900

25
1200
900

575

325
25 77

120

Filler Plate LA
Closes any gap from 60 to 360mm.

LA 270x36 = up to 0,97m2 48,80 023170

LA 120x36 = up to 0,43m2 24,30 023270

40
150

570

400
120
40

550

40
2700

33
150

567
867

ø 24
1200
620
570

ø 24
333
150
150

62
 Weight kg Item no.

Wall Thickness Compensation WDA

For variations in wall thickness at corners.
To be clamped onto panel with
BFD Alignment Coupler.
60
WDA-2 270/5, steel = 0,14m2 16,20 023182

120
WDA-2 270/6, steel = 0,16m2 17,10 023192
WDA 270/10, alu = 0,27m2 10,70 023995

WDA-2 120/5, steel = 0,06m2 7,49 023282 50/60/100

WDA-2 120/6, steel = 0,07m2 7,90 023292
WDA 120/10, alu = 0,12m2 4,95 023990 4.10

150
-

430

570
4.40

40
2700
50/60/100

150

33
430

567
867
40
1200
570
430

333
150

150
Filler Support TPP, alu TPP 270 8,08 101813
TPP 120 3,61 101823
TPP 270/27 7,86 101834
TPP 120/27 3,35 101839
With nailing strip.
For infilling with 21mm
(27mm) plywood filler. max. 360

Filler Support TPA TPA 270 5,79 023460

TPA 120 2,53 023450
Coniferous timber.
For infilling with 21mm plywood filler.

Detail TPP
51
(27)
21

32
98 (92)

66

60
2700

Detail TPA
36
21

1200
96

60

50

63
TRIO Accessories
Weight kg Item no.

Alignment Coupler BFD, galv. 4,05 023500

For all main connections.

Clamping length 25

max. 220
220mm
mm

60
164

260
52

60
64
58

51
288

Permissible Tension Force: 20kN.

Compensation Waler TAR 85 12,50 023550

Powder-coated, red.
For infilling, transfers tie forces, aligns.
Waler 85 8,67 023551
Powder-coated, yellow.
Without mounting hook.

850 80
30 30
45

180
Max compensation
width 360

Permissible Bending Moment: 4,4kNm

Projection Waler TVR45/45 8,91 023560

For connecting internal corners without
using TRIO TE Corners, particularly for
wall offsets. 450
450

40 40 30

45

64
 Weight kg Item no.

Hook Tie DW15 L = 400, galv. 0,64 023650

Thread DW15

58
400 20

Permissible Tension Force: 20kN.

4.10
Hook Tie Head DW15, galv. 0,42 023820 -
4.40

68
30 102
Female thread
DW15
Permissible Tension Force: 20kN.

Stopend Tie TS, galv. 1,20 023640

For transmitting force from stopends into
panel frame.

140
50
440

Thread DW15

58
Permissible Tension Force: 20kN.

Stacking Device TRIO, galv. 7,06 023390

For stacking and shifting 5 TRIO Panels
of any size. Allows the stack to be shifted
by crane or fork-lift truck.
4 devices are required for each stack.
Follow Instructions for Use.
790

2nd to 5th panel with

formlining facing up

1st panel with formlining

facing down
146
120

Lifting device to BGR 500 150

Permissible load: 500kg

Lifting Pin TRIO 0,33 023440

254
125
ø 18

Stacking Aid DW20 0,021 750303

Prevents the panels from slipping.
Protects formlining against damage.
ø 33

ø 22

ø 25

56

65
 Weight kg Item no.

Lifting Gear-3 TRIO 15,60 044770

For lifting stacks of panels.

TRANSPORTGEHÄNGE-3
Art.Nr: 044770
Fabr.Nr: Prüfplakette

Baujahr: 200
Betriebsanleitung
beachten!

3500
TR 330x240
ø 5x
S
10
TR 270x240 4
5x 0c
m
24
<

N 8x

Follow Instructions
for Use.

Lifting Gear Combi-2 TRIO 26,10 044760

For lifting stacks of panels and
TRIO Lifting Hooks or galvanized stacking
devices can be connected to the hooks.

TRIO-Kombigehänge-2
Art.Nr: 044760
Fabr.Nr: Prüfplakette

Baujahr: 200
Betriebsanleitung
beachten!
0
350

45° TR 330x240
ø S 5x
12 4300 kg 4 TR 270x240
60° 5x
m
0c

N
24
<

3100 kg 8x

Follow Instructions
for Use.

Lifting Hook TRIO 1.5t 7,06 023690

Use 2 for each unit to be lifted!
Follow Instructions for Use.

≤ 30°
110

60
510

1,50 t steel 1,50 t

0,75 t alu 0,75 t
208
®

TRIO-Versetzhaken 1,5t
Schalung und Gerüste

Art.Nr.: 023690
Fabr.Nr.:
Baujahr: 199
Tragfähigkeit: 1,5t
Gehängeneigungswinkel max.30°
Betriebsanleitung beachten!

Perm. load: 1500kg,

184 80
by max. angle of
inclination of 30°.

66
 Weight kg Item no.

Universal Waler 245 81,80 023920

For tying acute and obtuse angles of
thick walls. (eg bridge abutments).
Complete with:
Spacers (3x),
Hex. Bolt ISO 4014 M20x100-8.8, galv. (3x),
Hex. Nut ISO 7042 M20-8, galv. (3x),
and Compensation Washer 20 (6x).

132
ø 50

4.10

140
-
4.40
80 52

Spacer adjustable
Requires 30mm spanner

2466
20
52

60
46
24 39x60 = 2340

Waler Stop 4,65 023930

Used in combination with Universal Waler 245.

44
3 x 80 = 240 46

80
20

80
ø 36
130 34

350

Accessories:
Tie Rod Cylinder Yoke SW, galv. (1x) 2,10 022030
Wedge KZ (2x) 0,85 024240

Brace Connector TRIO, galv. 3,26 023660

For fixing Push-Pull Props and Kickers
to the TRIO panels.
Complete with:
Pin ø 16x42 and Cotter Pin 4/1. 160 222
41

104

Plug Ø 20/24mm 0,003 030300

For sealing tie holes ø 20 to 24mm, which
ø 28
are not required.
Supplied in packs of 250 pcs. ø 21
20

ø 19

67
 Weight kg Item no.

Top Tie Bracket-2 AH, galv. 2,00 023630 145

For anchoring independantly of the panel

grid, particularly in case of foundations ø 25

and extensions.

30

50

60
21
150

51

61
➊
➋
60

100 75

90

Permissible tie force

Hole ➊ = 15kN
Hole ➋ = 30kN

Foundation Strap TRIO 4,84 023800

For connecting TRIO Panels with 60mm
wide edge section assembled in the

88
“windmill” configuration.

48
150 342

100

80 142

182

Foundation Tie Clamp TLS 2,29 023010

For tying foundation formwork.
Complete with:
Captive Pin

140

SW 14
170

65
136

Requires 14mm spanner.

Permissible Tension Force with Perforated l 55m
m
Foundation Tie: 16kN. trave
ping
Clam

Perforated Foundation Tie, 16,90 023020

25m roll
For use with TRIO
Foundation Tie Clamp.
22
15

50

Permissible Tension Force: 16kN.

68
 Weight kg Item no.

Connector SB-1,2 - TRIO, DOMINO 48,80 027680

For single face formwork with SB 1 and 2
brace frame.
250

120 240

60
4.10
-
4.40

265
min 1270 max 1650

1770

650
160
60

490
Load-bearing point ø 21

Perm. load of the crane lifting eye: 1000kg

with lifting chains ≤ 15° to the vertical
25 25

Accessories:
Pins ø 19x165, galv. SB-TRIO (2x) 0,40 027690

Connector SB-A,B,C - TRIO, DOMINO 8,76 025740

One for each tie point

ø 21
117

25
125

130
25
203

cam nut 50

B 15 120
130

Accessory:
Pin ø 19x165, galv. 0,40 027690
(One for each connection)

Pin ø 19x165, galv. 0,40 027690

145
20
ø 19
ø 35

8 165

For 120mm thick formwork panels.

69
 Weight kg Item no.

Concreting Platform 120x270 130,00 022950

Preassembled 2,7m wide working and
concreting platform, which is mounted
on the panel from above with self-locking
mechanism.
Always lift with 4-chain Lifting Gear!
Crane lifting points are yellow for easy
identification.

440 1800 440

2680

80 1164

995
1210
328
120
163
163
312

Permissible Load: 150kg/m2

Scaffold Bracket TRG 65 35

Secured automatically when mounted TRG 80
on horizontal or vertical struts.
120

TRG 80 12,70 023670

560

TRG 120 16,80 023680

1051

895
1821

TRG 120

65 35
120
635

560
115 185

1051

200
1262
1821
635
115 185

200

Permissible Load: 150kg/m2

Allowable Spacing: 1,35m

70
 Weight kg Item no.

Scaffold Bracket TRG 100/112 13,10 023590

For mounting on horizontal and vertical
intermediate struts. Mounting on the top
struts allows the scaffold planking to extend
right to the front edge of the formlining.
Complete with:

1050
Pin (1x) and Cotter Pin 4/1 (2x).

4.10
-
4.40

max 154 981

110

290

758
216 44
Permissible Load: 150kg/m2 ø 20

Allowable Spacing: 1,35m

185 115
Accessories: 76
Handrail Post HSGP 3,54 034580

Handrail Post Holder TRIO 2,56 101592

Required from 3.0m drop, to comply with pa
n
xs
ZH 1/603 of German Association for the Ma .10m
2
Building Trade. l=
Maximum width of load to be carried = 1,35m.
Permissible l for 3x15 handrail boards = 2,10m.
Complete with:
Cotter Pin 4/1 (1x)
> 3000
213

155

Accessories:
43
213

Handrail Post HSGP 3,54 034580

Handrail Post HSGP 3,54 034580 65

Mounted on safety handrail post holder

120

TRIO, or TRIO scaffold bracket TRG 100/112.

35
560

1050

1300

39

71
Platform TRP and Accessories
Weight kg Item no.

Platform TRP 240 104,00 054500

With 45mm thick decking. 120 73,80 054501
90 66,00 054502
72 61,20 054503
60 56,40 054504

1032

1050
119
164 1950 266

2380 (1180, 880, 700, 580)

Platform TRP with hatch 240 125,00 054505

With 45mm thick decking and 120 90,20 054506
integrated, self-closing access hatch.

1032

1050
119
840 700 840

2380 (1180)

End Handrail TRP 12,60 054519

Usable from left and right.
End safety handrail for the
TRIO platform TRP.

1189
934
30
834
490

1030

72
 Weight kg Item no.

Corner Platform TRP 15,00 107009

For creating external corners d = 39mm.

0
10
0

630
12
1682
4.10
-
4.40

Accessories:
Corner Handrail TRP (1x) 16,40 107021
Screw Plate DW 15/115, galv. (2x) 0,60 026647
Fixation Corner Platform TRP (2x) 0,70 107019

Corner Handrail TRP 16,40 107021

1561

490

990
1412

Screw Plate DW 15/115, galv. 0,60 026647

For connecting Corner Platform TRP
to the adjacent platforms.
B 15
100

50

60 10 115

Fixation Corner Platform 0,70 107019

For connecting Corner Platform TRP
to the adjacent platforms. 95
50

DW 15
50

73
 Weight kg Item no.

Push-Pull Prop TRP 150/210 27,50 107546

Complete with Brace TRP 240/300 31,10 054511 1142
and Kicker TRP 118. 300/360 33,60 054512

Brace TRP

1070 - 1770
1970 - 2670
2570 - 3270
Push-Pull
Prop

Kicker
TRP 118

1041

Brace TRP 8,02 054518

40
1212

Kicker TRP 118 7,77 750343

1156
62

Bracing TRP 240cm 11,60 054529

TRP 120cm 6,26 054528
Mounted at kicker level to secure base
2070
of ladder. Only required when unsing
platforms with hatch.
89
207

Erection Device TRP 200, 10 kN 32,60 054517

for all extended elements

396
60

110
1710

74
 Weight kg Item no.

Ladder 240-360 24,10 107738

Telescopic.

56

38

50

94
4.10
-
4.40
350 min. 2345 - max. 3695

300 180

Base Spindle TRH 6,76 106126

For adjusting large TRIO or
TRIO-H elements.

840

141 60

708
Landing with Ladder TRH 90 11,80 106608
For attaching to the horizontal braces.
Max. standing height 100cm.
621
340

Hinged Step TRP 12,90 107793

For fixing the lowest access ladder of 558
the TRIO Platform TRP if the Bracing TRP
is not used, e.g. when using climbing
139

120

scaffold.
730

540

75
TRIO-L Panels Alu, h = 2,70m
Weight kg Item no.

Panel Alu TRA 270x90 = 2,43m2 70,60 023850

Panel Alu TRA 270x60 = 1,62m2 49,70 023870
Panel Alu TRA 270x30 = 0,81m2 31,70 023880
Fitted with 18mm Finply formlining.
900 600

300 300 300 300

ø 24

2700
120

ø 27

Detail:
The tapered tie hole allows
the tie to be angled at 6° in
any direction.

Corner Alu TAE 270-2 = 1,62m2 42,60 023891 ø 24

For 90° internal corners
Multi Panel Alu TAM 270x72 = 1,94m2 60,90 023860
For external corners, for oblique
angles, for wall junctions, stopends etc..
Complete with:
Plug ø 20/24 (44x).
30 30
30 30 30
120

25 49
300

720

300
300
33
150
300

300
575

575
300

37
600

23
300

300
300
2700

300
300

300
300

ø 24
300

600
300
575

575
300

300

150

25 25

150 150

Fitted with 18mm Finply formlining.

76
TRIO-L Panels Alu, h = 0,90m
Weight kg Item no.

Panel Alu TRA 90x120 = 1,08m2 33,30 023900

Fitted with 18mm Finply formlining.
1200

300
900

300
4.10
-
4.40

Multi Panel Alu TAM 90x72 = 0,65m2 23,70 023980

ø 24
For external corners, for oblique
angles, for wall junctions, stopends etc..
stopends etc.
Complete with:
Plug ø 20/24 (44x). 30 30
30 30 30
25 49

720

300

30
37
300
900

300
300

37
30
25 25
Fitted with 18mm Finply formlining.

Panel Alu TRA 90x60 = 0,54m2 18,40 023950

Panel Alu TRA 90x30 = 0,27m2 11,00 023960 600 300
Fitted with 18mm Finply formlining. 300 300
300
300
900

300
120

Corner Alu TAE 90-2 = 0,54m2 15,20 023971

For 90° internal corners
Fitted with 18mm Finply formlining. 300
33
33
300
900

300

120
300
300

ø 24

77
TRIO Steel Panels, h = 3,30m
Weight kg Item no.

Panel TR/4 330x240 = 7,92m2 398,00 054304

Fitted with 18mm Finply formlining.
2400

300 600 600 600 300

150
300

575
300

1175
300
300
300
ø 24

3300

300
300
150

75 75

300
ø 24

1650
680
300
300

575
120

300

150
150 100 100 150

ø 27 540 1320 540

Detail: ø 20
77

The tapered tie hole allows

120

the tie to be angled at 6° in

any direction.

Levering corner

Panel TR/4 330x120 = 3,96m2 192,00 054314

Panel TR/4 330x 30 = 0,99m2 64,90 054364
Fitted with 18mm Finply formlining. 1200

300 300
300
25 25

ø 24
3300

3300

ø 24
120

ø 27

Detail:
The tapered tie hole allows
the tie to be angled at 6° in 75
any direction.
112,5 112,5
Levering corner Also with levering corner as
from the year 2002

78
 Weight kg Item no.

Panel TR/4 330x90 = 2,97m2 135,00 054324

Panel TR/4 330x60 = 1,98m2 97,40 054354
Fitted with 18mm Finply formlining.

900 600

300 300 300

4.10
-
4.40

3300

3300
Also with levering
corner as from the year 2002

Panel TR/4 330x72 = 2,38m2 108,00 054334

Multi Panel TRM/4 330x72 = 2,38m2 122,00 054344
ø 24
For external corners, for oblique
angles, wall junctions, stopends etc..
Fitted with 18mm Finply formlining.
Complete with:
Plug ø 20/24 (88x).
30
30 30
25 49

720 720

300 300
300

37
600

23
600
3300

3300

300
300
300
600
300

Also with levering corner as Levering corner

from the year 2002

79
 Weight kg Item no.

Inside Corner TE/4 330 = 1,98m2 86,10 054374

120
For 90° inside corners.
Fitted with 18mm Finply fomlining.

300
Articulated Corner TGE/4 330 = 1,98m2 121,00 054414

120
For oblique angles from 75°, used internally

300
and externally. 300

Fitted with steel formlining. ≥ 75°

300 584
33 292 33

290
300

575
575

300
300

1175

1175
300
300

300
300

300
300
ø 24

175
3300

3300
300

125
300
300

300
300

1650

1650
300
300

300
300
575

575
310
300

TRIO Wall Thickness Compensation WDA

For wall thickness compensation in
corner areas. 60 400
WDA-2 330/5 = 0,17m2 20,10 054391
40 120
120

WDA-2 330/6 = 0,20m2 21,20 054401

WDA/4 330/10 = 0,33m2 12,40 054435
550

Filler Plate LA/4 330x36 = 1,19m2 62,20 054384

Closes any gap from 60 to 360mm. 50/60/100 40
150
150
430

570
570

900
1170
1170

ø 24
3300
3300

1650
1650

50
1170

900
570
570
430

150
150

80
 Weight kg Item no.

Stopend Panel TR/4 330x24 = 0,65m2 53,80 023050

For 240mm thick walls.
Can also be used as a wall panel.
300

Shaft Panel TSE 330 = 0,33m2 140,00 105525

For lifting complete internal formwork

455
100
to shafts. Height extendable.
Complete with:
Pin 20x140, galv. and Shuttered
Cotter Pin 4/1 (7x/5x). 240

4.10
-

575
4.40
100

1200

600

1500
480
3300

3300
900

Struck

1080
2125

1200
55
1650
1200

25
575

569

297
Load-bearing point 300mm panel
Permissible load: 2000kg 600/720/900/1200mm panel

Filler Support TPP 330 9,87 101829

With nailing strip. TPP 330/27 9,17 101846 max. 360
For filling gaps with
21mm (27mm) plywood.

Filler Support TPA 330 7,10 054430

Coniferous timber.
For infilling with 21mm plywood filler.

Detail TPP
51
(27)
21

32
98 (92)

66

3300

60

Detail TPA

36
21
96

60

50

81
Panels TRIO Structure
Weight kg Item no.

TRIO Structure Panels

fitted with 21mm fixing board.

Panels h = 3,30m
TS/4 330x240 375,00 054305
TS/4 330x120 181,00 054315
TS/4 330x 90 127,00 054325
TS/4 330x 72 101,00 054335
TS/4 330x 60 91,60 054355
TS/4 330x 30 62,10 054365
TSM/4 330x 72 118,00 054345

Corner TR-Structure TSE/4 330 81,10 054375

Panels h = 2,70m
TS 270x240 310,00 022571
TS 270x120 150,00 022511
TS 270x 90 105,00 022521
TS 270x 72 83,20 022531
TS 270x 60 75,60 022551
TS 270x 30 50,60 022561
TSM 270x 72 90,10 022541

Corner TR-Structure TSE 270 65,80 022581

Panels h = 1,20m
TS 120x120 63,70 022601
TS 120x 90 49,60 022611
TS 120x 72 41,00 022621
TS 120x 60 37,40 022641
TS 120x 30 23,90 022651
TSM 120x 72 49,50 022631

Corner TR-Structure TSE 120 31,30 022661

Artic. Corner TR-Structure

TSGE 270 87,00 023201
TSGE 120 41,90 023301

≥ 75°

251 251
21
120
575

331

331
2700

331
1200
575

35

82
 Weight kg Item no.

Wall Thickness Compensation WDAS, Alu

With nailing strip.
WDAS/4 330/5 10,80 054395
WDAS/4 330/6 14,30 054405
WDAS 270/5 8,83 023181 60
WDAS 270/6 9,55 023191

120
WDAS 120/5 3,98 023281 50 or 60
WDAS 120/6 4,32 023291

150
60

433

120
50 or 60

137

1170
4.10

150
-

1650

433
4.40

137
60

3300

2130

120
50 or 60

2700

33
150
433

570
867
1200
570

570
433

433

150
150

150

83
84
4.50 TRIO HOUSING

Page

023500 Alignment Coupler BFD, galv. 99

103606 Anchor Bolt PERI MMS 20x130 100
107600 Angle TRH 180x 6 96
107607 Angle TRH 180x15 96
107601 Angle TRH 270x 6 96
107608 Angle TRH 270x15 96
106126 Base Spindle TRH 96
023550 Compensation Waler TAR 85 99
107470 Element TRH 264x180 I 86
107474 Element TRH 264x180 O 86
107480 Element TRH 264x270 I 87
107481 Element TRH 264x270 O 87
107472 Element TRH 264x360 I 88
107473 Element TRH 264x360 O 88
107492 Element TRH 264x540 I 89 4.50
107493 Element TRH 264x540 O 89
107497 Element TRH 354x180 I 92
107498 Element TRH 354x180 O 92
107502 Element TRH 354x270 I 93
107503 Element TRH 354x270 O 93
108983 Element with Corner Platform TRH 264x270 I 91
108984 Element with Corner Platform TRH 354x270 I 95
108995 Extension Waler TRH 125 101
101592 Handrail Post Holder TRIO 101
034580 Handrail Post HSGP 101
054475 Handrail Post TRH 97
106147 Handrail TRH 180 Retractable 97
106148 Handrail TRH 270 Retractable 97
023650 Hook Tie DW 15/400, galv. 101
108842 Inside Corner TRH 330-66x66 90
108830 Inside Corner TRH 420-66x66 94
108225 Kicker TRH 135 100
108566 Ladder TRH 264 97
108568 Ladder TRH 354 97
106608 Landing with Ladder TRH 90 98
108785 Outside Corner TRH 330-90x90 90
108808 Outside Corner TRH 420-90x90 94
023960 Panel Alu TRA 90x 30 99
023950 Panel Alu TRA 90x 60 99
023880 Panel Alu TRA 270x 30 99
023870 Panel Alu TRA 270x 60 99
028010 Push-Pull Prop RSS I 100
054461 Push-Pull Prop with Kicker Brace TRH 116 100
054464 Spacer TRH 15-30 98
108719 Tie Rod Spanner TRH SW 22 98
054480 Tie TRH 15-30/99 98
104032 Tool Box TRH 96
106087 Top Tie TRH 98
023551 Waler 85 99
030370 Wingnut Pivot Plate DW 15 , galv. 101

85
 Weight kg Item no.

Panel TRH 264 x 180 l (4,75m2) 589,00 107470

Fin-Ply plywood, 18 mm
Complete with: Stacking height
Lifting gear TRH, 2-sling (1x)
Concreting plate TRH 180 (1x)

470
Stacking brackets TRH (2x)
Bracket TRH, left (1x)

470
Bracket TRH, right (1x)
Grid TRH 180 (1x)

470
Grid clamps TRH (6x)
Handrails TRH 180 (1x)

1750
906

1045

100
3510
2640
2440

950
340 130 450 900 450
1800

Accessories:
Angle TRH 180x6 (1x) 17,20 107600

Panel TRH 264x180 A (4,75m2) 471,00 107474

Fin-Ply plywood, 18 mm
Complete with: Stacking height
Lifting gear TRH, 2-sling (1x)
340 340 340

Concreting plate TRH 180 (1x)

100
2640
950

340 450 900 450

1800

Accessories:
Angle TRH 180x6 (1x) 17,20 107600

86
 Weight kg Item no.

Panel TRH 264x270 I (7,13m2) 835,00 107480

Fin-Ply plywood, 18 mm
Complete with:
Lifting gear TRH, 2-sling (1x)
Concreting plate TRH 180 (1x)
Stacking brackets TRH (3x)
Bracket TRH, left (1x)
Bracket TRH, right (1x)
Grid TRH 180 (1x)
Grid clamps TRH (6x)
Handrails TRH 180 (1x)

2650

4.50

100
3485
2640
950
450 900 900 450
2700

Accessories:
Angle TRH 270x6 (1x) 25,70 107601

Panel TRH 264x270 A (7,13m2) 678,00 107481

Fin-Ply plywood, 18 mm
Complete with:
Lifting gear TRH, 2-sling (1x)
Concreting plate TRH 180 (1x)
100
2640
950

450 900 900 450

2700

Accessories:
Angle TRH 270x6 (1x) 25,70 107601

87
 Weight kg Item no.

Panel TRH 264x360 I (9,50m2) 1142,00 107472

Fin-Ply plywood, 18 mm
Complete with:
Lifting gear TRH, 2-sling (1x)
Concreting plate TRH 180 (2x)
Stacking brackets TRH (4x)
Bracket TRH, left (2x)
Bracket TRH, right (2x)
Grid TRH 180 (2x)
Grid clamps TRH (12x)
Handrails TRH 180 (2x)

3550

100
3510
2640
950

450 900 900 900 450

3600

Accessories:
Angle TRH 180x6 (2x) 17,20 107600

Panel TRH 264x360 A (9,50m2) 906,00 107473

Fin-Ply plywood, 18 mm
Complete with:
Lifting gear TRH, 2-sling (1x)
Concreting plate TRH 180 (2x)
100
2640
950

450 900 900 900 450

3600

Accessories:
Angle TRH 180x6 (2x) 17,20 107600

88
 Weight kg Item no.

Panel TRH 264x540 I (14,26m2) 1641,00 107492

Fin-Ply plywood, 18 mm
Complete with:
Lifting gear TRH, 2-sling (1x)
Concreting plate TRH 180 (2x)
Stacking brackets TRH (6x)
Bracket TRH, left (2x)
Bracket TRH, right (2x)
Grid TRH 180 (2x)
Grid clamps TRH (12x)
Handrails TRH 180 (2x)

5350

4.50

100
3510
2640
950

450 900 900 900 900 900 450

5400

Accessories:
Angle TRH 270x6 (2x) 25,70 107601

Panel 264x540 A (14,26m2) 1328,00 107493

Fin-Ply plywood, 18 mm
Complete with:
Lifting gear TRH, 2-sling (1x)
Concreting plate TRH 180 (2x)
100
2640
950

450 900 900 900 900 900 450

5400

Accessories:
Angle TRH 270x6 (2x) 25,70 107601

89
 Weight kg Item no.

Inside Corner TRH 330-66x66 (4,36m2) 210,00 108842

For 90° internal corners
Formlining: Finply 18mm
Complete with:
Lifting gear TRH 2-sling (1x)
Adjustable spindle TRH internal corner (2x)

600
475
3300

1075
575
25
Stacking
660

660
Stacking aid

Outside Corner TRH 330-90x90 (5,94m2) 356,00 108785

For 90° internal corners
Formlining: Finply 18mm
Complete with:
Lifting gear TRH 2-sling (1x)
600
475

3300
1075

Stacking
575

1020

1020

90
 Weight kg Item no.

Element with Corner Platform

TRH 264x270 I (7,13m2) 849,00 108983
Formlining Finply 18mm
Complete with:
Lifting gear TRH 1-sling (1x)
Concreting plate TRH 270 (1x)
Stacking spacer TRH (3x) 2650
Bracket TRH left (1x)
Bracket TRH right (1x)
Corner grating TRH 270 (1x)
Grating clamps TRH (6x)
Handrails TRH 270 (1x)

100
Can also be used as standard
wall element.
4.50

3485
2640
950
450 900 900 450
2700

Accessories:
Angle TRH 270x6 (1x) 25,70 107601

91
 Weight kg Item no.

Element TRH 354x180 I (6,37m2) 740,00 107497

Fin-Ply plywood, 18 mm
Complete with:
Lifting gear TRH, 2-sling (1x)
Concreting plate TRH 180 (1x)
Stacking brackets TRH (2x)
Bracket TRH, left (1x)
Bracket TRH, right (1x)
Grid TRH 180 (1x)
Grid clamps TRH (6x)
Handrails TRH 180 (1x) 906 1750

1045

100
4835
3540
3340

1200
640
340 130 450 900 450
1800

Accessories:
Angle TRH 180x6 (1x) 17,20 107600

Element TRH 354x180 A (6,37m2) 626,00 107498

Fin-Ply plywood, 18 mm
Complete with:
Lifting gear TRH, 2-sling (1x)
Concreting plate TRH 180 (1x)
100
3540
640

340 450 900 450

1800

Accessories:
Angle TRH 180x6 (1x) 17,20 107600
Handrails TRH 180, lowerable (1x) 25,20 106147

92
 Weight kg Item no.

Element TRH 354x270 I (9,56m2) 1060,00 107502

Fin-Ply plywood, 18 mm
Complete with:
Lifting gear TRH, 2-sling (1x)
Concreting plate TRH 270 (1x)
Stacking brackets TRH (3x)
Bracket TRH, left (1x)
Bracket TRH, right (1x)
Grid TRH 270 (1x)
Grid clamps TRH (6x)
Handrails TRH 270 (1x) 1750

100
4.50

4835
3540
1200
640
450 900 900 450
2700

Accessories:
Angle TRH 270x6 (1x) 25,70 107601

Element TRH 354x270 A (9,56m2) 907,00 107503

Fin-Ply plywood, 18 mm
Complete with:
Lifting gear TRH, 2-sling (1x)
Concreting plate TRH 270 (1x)
100
3540
1200
640

450 900 900 450

2700

Accessories:
Angle TRH 270x6 (1x) 25,70 107601
Handrails TRH 270, lowerable (1x) 32,20 106148

93
 Weight kg Item no.

Inside Corner TRH 420-66x66 (5,55m2) 261,00 108830

For 90° corners
Formlining: Finply 18mm
Complete with:
Lifting gear TRH 2-sling (1x)
Adjustable spindle TRH internal corner (2x)

600
4200

475
1075
575
25
Stacking
660

660
Stacking aid

Outside Corner TRH 420-90x90 (7,56m2) 440,00 108808

For 90° corners
Formlining: Finply 18mm
Complete with:
Lifting gear TRH 2-sling (1x)
600
475

4200
1075
575

Stacking
1020

1020

94
 Weight kg Item no.

Element with Corner Platform

TRH 354x270 I (9,56m2) 1073,00 108984
Formlining: Finply 18mm
2650
Complete with:
Lifting gear TRH 1-sling (1x)
Concreting plate TRH 270 (1x)
Stacking spacer TRH (3x)

100
Bracket TRH left (1x)
Bracket TRH right (1x)
Corner grating TRH 270 (1x)
Grating clamps TRH (6x)
Handrails TRH 270 (1x)

Can also be used as standard

wall element.

4385
4.50

3540
1200
640
450 900 900 450
2700

Accessories
Angle TRH 270x6 (1x) 25,70 107601

95
 Weight kg Item no.

Angle TRH
As bottom spacer for
projecting installations.
Complete with:
Hex. bolt ISO 4014,
M20x100-8.8, galv. (3 or 4x)
Hex. nut ISO 7042 M20-8, galv. (3 or 4x)

TRH 180x6 17,20 107600

TRH 270x6 25,70 107601
TRH 180x15 35,10 107607
TRH 270x15 52,70 107608

750 750

60 or 150

90 1798
M20x100

800 800 800

2698

Tool box TRH 25,10 104032

For storing accessories and tools.
Complete with:
Hex. bolt ISO 4017 M12x30-8.8, galv. (4x)‚
400

900
204

714

Base spindle TRH 6,76 106126

For aligning large TRIO or TRIO-H elements.
840

141 60

96
 Weight kg Item no.

Ladder TRH 264 19,60 108566

Ladder TRH 354 24,50 108568
Complete with:
Support
355
300 120

246
246
4.50

10 x 280 = 2800
3121
7 x 280 = 1960
2280

Handrail post TRH 4,26 054475

For safety on external elements.
2 posts for 180 and 270 panel lengths
140

4 posts for 360 and 540 panel lengths

65
400

783
800

270 50

Handrail TRH 180, foldaway 25,20 106147

Handrail TRH 270, foldaway 32,20 106148
For external elements.

2680 40
715
950

100

97
 Weight kg Item no.

Spacer TRH 15-30 2,02 054464

For wall thicknesses from 15 to 30 cm. Detail
2 spacers for 180 and 270 panel lengths, 20 20 20 30
4 spacers for 360 and 540 panel lengths. 443

50
13

80

50
20 20 20 20

Top Tie TRH 7,77 106087

When using TRIO extensions without
concreting plate TRH. 652 210
For wall thicknesses from 15 to 30 cm.

120
Accessories:
Alignment Coupler BFD 4,05 023500

Tie TRH 15-30/99 4,66 054480

For wall thicknesses from 15 to 30 cm. 990
1 (2) tie for each strongback height 264 (354)
Complete with: SW 46

hex. union nut M30 DIN 6331-10 (1x)

and cotter pin 6/2 (1x).
DW 30 M30
FS 5/1

SW 22

15 - 30 cm

Tie Rod Spanner TRH SW 22 3,65 108719

Landing with Ladder TRH 90 11,80 106608 708

For attaching to the horizontal braces.
Max. standing height 100cm.
621
340

98
 Weight kg Item no.

Element TRA 90x30 = 0,27 m2 11,00 023960

Element TRA 270x30 = 0,81 m2 31,70 023880
For extending TRIO-H elements by 30 cm. 900

300
2700

300
4.50
Accessories:
Alignment coupler BFD 4,05 023500
Spacer anchor TRH, top 7,77 106087

Element TRA 90x30 = 0,27 m2 18,40 023950

Element TRA 270x30 = 0,81 m2 49,70 023870 900
For extending TRIO-H elements by 30 cm.

600
2700

600
Accessories:
Alignment Coupler BFD 4,05 023500
Spacer Anchor TRH, top 7,77 106087

Alignment coupler BFD 4,05 023500

For all main connections.
Clamping length 25

max.
max.220mm
220 mm
60
164

260
52

60
64
58

51

288
Permissible tensile force: 20kN

Compensation waler TAR 85 12,50 023550

850 80
For infilling, transfers tie forces, aligns.
Waler 85 8,67 023551
30 30

Powder coated yellow.

45

180

Without mounting hook.

max. 360

Permissible bending moment: 4,4 kNm

99
 Weight kg Item no.

Adjusting prop TRH 116 with brace 19,60 054461

For TRH 264 panels. 2 for each panel.
mi
n.
10
80
–m
ax.
19
00

28°
40
1095

150
100
10
ø 21

Kicker TRH 135 7,31 108225

For TRH 354 panels and extended panels.
2 per unit.

40

1350

150
100
10

ø 21

Push-Pull Prop RSS I L=2,05-2,94m 18,00 028010

in connection with kicker brace TRH 135.
Perm. loads: see PERI design tables.

min 2050-max 2940

36
71

40 1915 ø 16
ø 16
10
15

ø 70

Anchor bolt MMS 20x130 0,33 103606

For erecting push-pull props
without plugs, tension cables etc.
Use drill Ø 18 mm according to DIN 8035!
SW 30
Drilling depth min. 140mm.
130

20

100
 Weight kg Item no.

110
Extension Waler TRH 125 16,60 108995
For extending TRH elements 110

by 30 or 60mm.

1250
1222
4.50
Accessories:
Hook Tie DW15 L = 400, galv. (1x) 0,64 023650

110
Wingnut Pivot Plate DW 15, galv. (1x) 1,54 030370

Hook Tie DW15 L = 400, galv. 0,64 023650

Thread DW15

58
400 20

Permissible Tension Force: 20kN.

Wingnut Pivot Plate DW 15, galv. 1,54 030370

With pivoted, captive nut.
120

76
27

ø9
8° 8°

110
Permissible load to DIN 18216: 90kN

Handrail Post Holder TRIO 2,56 101592

Required from 3,0m drop, to comply with
ZH 1/603 of German Association for the
Building Trade.
Maximum width of load to be carried = 1,35m.
Permissible l for 3x15 handrail boards = 2,10m.
213

Complete with: Cotter Pin 4/1 (1x)

155
43
213

Accessories:
Handrail Post HSGP 3,54 034580
120

Handrail Post HSGP 3,54 034580

Mounted on safety handrail post holder TRIO.
35
560

65
1050

1300

39

101
102
4.60 DOMINO

Page Page

066080 Alignment Coupler DRS 110 066086 Top Tie Bracket DAH, galv. 113
066067 Articulated Corner DGE 75 108 066093 Transporting Device DOMINO 114
066047 Articulated Corner DGE 125 107 066068 Wall Thickness Compensation DWD 75x 5 108
066029 Articulated Corner DGE 250 105 066048 Wall Thickness Compensation DWD 125x 5 107
066082 Brace Connector DRA 112 101964 Wall Thickness Compensation DWD 125x10 107
066083 Bulkhead Tie DAS, galv. 112 066030 Wall Thickness Compensation DWD 250x 5 105
066088 Chamfer Strip DSD 250 114 101986 Wall Thickness Compensation DWD 250x10 105
066073 Column Panel D 75x20 115 066081 Wedge Clamp DKS 110
066072 Column Panel D 75x30 115
066071 Column Panel D 75x35 115
066070 Column Panel D 75x40 115
066058 Column Panel D 125x20 115
066057 Column Panel D 125x30 115
066056 Column Panel D 125x35 115
066055 Column Panel D 125x40 115
066038 Column Panel D 250x20 115
066037 Column Panel D 250x30 115
066036 Column Panel D 250x35 115
066035 Column Panel D 250x40 115 4.60
066084 Compensation Waler DAR 80 110
066053 Filler Support DPA 125 107
066054 Filler Support DPA 125/27 107
066033 Filler Support DPA 250 105
066034 Filler Support DPA 250/27 105
066090 Foundation Tie Clamp DOMINO DLS 113
106877 Handrail Post Holder DOMINO 111
034580 Handrail Post HSGP 111
066091 Lifting Hook DOMINO 500kg 110
066052 Multi Panel Alu DMA 125x75 106
066032 Multi Panel Alu DMA 250x75 104
066062 Multi Panel DM 75x75 108
066042 Multi Panel DM 125x75 106
066024 Multi Panel DM 250x75 104
066066 Outside Corner Angle DAW 75 108
066046 Outside Corner Angle DAW 125 107
066028 Outside Corner Angle DAW 250 105
066051 Panel Alu DA 125x 75 106
066050 Panel Alu DA 125x100 106
066023 Panel Alu DA 250x 75 104
066021 Panel Alu DA 250x100 104
066064 Panel D 75x 25 108
066063 Panel D 75x 50 108
066061 Panel D 75x 75 108
066060 Panel D 75x100 108
066044 Panel D 125x 25 106
066043 Panel D 125x 50 106
066041 Panel D 125x 75 106
066040 Panel D 125x100 106
066026 Panel D 250x 25 104
066025 Panel D 250x 50 104
066022 Panel D 250x 75 104
066020 Panel D 250x100 104
023020 Perforated Foundation Tie 113
030290 Plug Ø 20mm 112
066100 Positioning DEA 90° 105
066097 Positioning DGE 135° external 105
066095 Positioning DGE 135° internal 105
066085 Scaffold Bracket DG 85 111
066099 Stacking Aid DOMINO DSW 114
066094 Stacking Device DOMINO, galv. 113
101934 Stopend Panel DOMINO AT 125x3 109
108856 Stopend Panel DOMINO AT 125x5 109
101927 Stopend Panel DOMINO AT 250x3 109
108855 Stopend Panel DOMINO AT 250x5 109
101935 Stopend Panel DOMINO MTF 125x20 109
101936 Stopend Panel DOMINO MTF 125x24/25 109
101937 Stopend Panel DOMINO MTF 125x30 109
101940 Stopend Panel DOMINO MTF 125x35/36 109
101928 Stopend Panel DOMINO MTF 250x20 109
101929 Stopend Panel DOMINO MTF 250x24/25 109
101930 Stopend Panel DOMINO MTF 250x30 109
101931 Stopend Panel DOMINO MTF 250x35/36 109

103
DOMINO Panels h = 2,50m
Weight kg Item no.

Panels with steel frame, red

Panel D 250x100 = 2,50m2 86,50 066020
Panel D 250x 75 = 1,88m2 70,10 066022
Panel D 250x 50 = 1,25m2 53,50 066025
Panel D 250x 25 = 0,63m2 37,60 066026
Formlining: 15mm Combi

Panels with aluminium frame, yellow

Panel DA 250x100 = 2,50m2 57,30 066021
Panel DA 250x 75 = 1,88m2 46,10 066023
Formlining: 15mm Combi
1000 750 500
250 250 250 250 250 250

250

530
250
250
250
250
2500

1440
250
250

40
250

ø 20
250

530
250

56 160
120
160 56 120 56 160 160 56 56 160 160 100 56
117

50

125 125 125 125 125 125 125 125 250 125

Multi Panel
DM 250x75 = 1,88m2 steel, red 75,10 066024

DMA 250x75 = 1,88m2 alu, yellow 49,00 066032

For oblique angles, wall offsets,
750 Detail x
wall junctions, stopends etc.
250 250
Formlining: 15mm Combi
Complete with:
250

ø 20
Plug ø 20 item no. 030290 (46 pcs.)
530

x
500

41 34 30
30
250
250

1440
2500
250
250
500

Additional hole
530

for identifying
the multi panel
250

in a stack.

160 5612056 160

117

50

125 125 125 125

Accessories:
Plug ø 20mm 0,002 030290

104
 Weight kg Item no.

Articulated Corner
DGE 250 = 1,25m2 39,10 066029
Aluminium, yellow powder coated. 492 250
For obtuse and acute angles from 75°.

117
Can be used inside and outside.

250
Complete with:
Corner Locking 90° DEA (2x) 246
Detail x

260
30 40

530
x ø 20

298
250 203
250

1440
2500

250
250
250
4.60

250

530
240
≥ 75°

120
Locking 90° DEA 1,48 066100
Positioning Pin 135° Ext.
Positioning Pin DGE 135° Int. 1,07 066095
60
120

120
Positioning Pin DGE 135° Ext. 1,59 066097
Complete with:
Hex. Bolt ISO 4017 M12x40-8.8, galv. (2x) 470
135°

M12x40
°

135°
90

320

Locking 90° DEA M12x40 Positioning Pin 135° Int.

Outside Corner Angle DAW 250 10,20 066028

Aluminium, yellow powder coated.
For the external corner joint.

Wall Thickness Compensation DWD

DWD 250/5 = 0,13m2 7,23 066030
DWD 250/10 = 0,25m2 11,40 101986
Aluminium, yellow powder coated.
For adjusting to the wall thickness
in the vicinity of corners and T-junctions.
117 25 27 93
Filler Support DPA 250 4,20 066033
36

50
117

117
117

For infills using 21mm DPA 250/27 3,90 066034

(27mm) plywood. Timber. 50 100
250

355
430

533

530
250

40

40
250
250
250
2500

2500

2500

2490
250
250
250
250

527
430

355

280
250

105
DOMINO Panels h = 1,25m
Weight kg Item no.

Panels with steel frame, red

Panel D 125x100 = 1,25m2 45,90 066040
Panel D 125x 75 = 0,94m2 37,80 066041
Panel D 125x 50 = 0,63m2 28,20 066043
Panel D 125x 25 = 0,31m2 19,00 066044
Formlining: 15mm Combi

Panels with aluminium frame, yellow

Panel DA 125x100 = 1,25m2 29,70 066050
Panel DA 125x 75 = 0,94m2 23,80 066051
Formlining: 15mm Combi

1000 750 500

250 250 250 250 250 250

40

40
250
250

930

930
1250
250
40
250 ø 20

240
280
250

40
40 280

56 160
120 120
160 56 56 160 160 56 56 160 160 100 56
117

50

125 125 125 125 125 125 125 125 250 125

Multi Panel
DM 125x75 = 0,94m2 steel, red 49,10 066042

DMA 125x75 = 0,94m2 alu, yellow 30,00 066052

For oblique angles, wall offsets,
wall junctions, stopends etc.
Formlining: 15mm Combi
Complete with:
Plug ø 20 item no. 030290 (46x)
750
250 250 Detail x
40
250

ø 20
250

930
1250
250

34 30
x 41
500

30
280

Additional hole
for identifying
the multi panel
in a stack.
160 5612056 160
117

50

125 125 125 125

Accessories:
Plug ø 20mm 0,002 030290

106
 Weight kg Item no.

Articulated Corner
DGE 125 = 0,63m2 21,60 066047
Aluminium, yellow powder coated.
For obtuse and acute angles from 75°.
Can be used inside and outside.
Complete with:
Corner Locking 90° DEA (1x)
492 250

117

250
246 Detail x

40
30 40

260
ø 20

250

930
1250

238 250
x

280
253
4.60

≥ 75°

120
Locking 90° DEA 1,48 066100
Positioning Pin 135° Ext.
Positioning Pin DGE 135° Int. 1,07 066095
60
120

120

Positioning Pin DGE 135° Ext. 1,59 066097

Complete with:
Hex. bolt ISO 4017 M12x40-8.8, galv. (2x) 470
135°

M12x40
135°
°
90

320

Locking 90° DEA M12x40 Positioning Pin 135° Int.

Outside Corner Angle DAW 125 5,20 066046

Aluminium, yellow powder coated.
For the external corner joint.

Wall Thickness Compensator DWD

DWD 125/5 = 0,06m2 3,68 066048
DWD 125/10 = 0,125m2 5,88 101964
Aluminium, yellow powder coated.
For adjusting the wall thickness
in the vicinity of corners and T-junctions.
117 25 93
27
Filler support DPA 125 2,10 066053
36

50
117
117

117

For infills using 21mm DPA 125/27 1,90 066054

(27mm) plywood. Timber. 50 100
43

43
40 175
250

355
250

40
1250

1250

1250

1240
250
250

355
277

280
250

175

107
DOMINO Panels h = 0,75m
Weight kg Item no.

Panel D 75x100 = 0,75m2 30,70 066060

Panel D 75x 75 = 0,56m2 26,00 066061
Panel D 75x 50 = 0,38m2 18,30 066063
Panel D 75x 25 = 0,19m2 11,60 066064
Panels with steel frame, red 1000 750 500
Formlining: 15mm Combi 250 250 250 250 250 250

40
250

430
40

250
750
ø 20

280
250
56 160
160 56 120 56 160 160 56 120 56 160 160 100 56

117
50
125 125 125 125 125 125 125 125 250 125

DOMINO Multi Panel DM 75x75 = 0,56m2 37,30 066062

For oblique angles, wall offsets, 750 Detail x
wall junctions, stopends etc. 250 250
Formlining: 15mm Combi

40
Complete with: ø 20

250
Plug ø 20 item no. 030290 (23x)

430
x

750
500

280
41 34 30
30

160 5612056 160

117

Additional hole
50

for identifying 125 125 125 125

the multi purpose
panel in a stack.

Articulated Corner DGE 75 = 0,38m2 13,80 066067

Aluminium, yellow powder coated.
For obtuse and acute angles from 75°.
Can be used inside and outside. Detail x
Complete with: 30 40
Corner Locking 90° DEA (1x)
246 ø 20
40
238 260

430

x
750

280
253

492 250
117

≥ 75°
250

DAW 75 Outside Corner Angle 3,20 066066

Aluminium, yellow powder coated.
For the external corner joint.
50
DWD Wall Thickness
43

Compensator DWD 75x5 = 0,04m2 2,32 066068

40 175
250

Aluminium, yellow powder coated.

750
250
750

For adjusting the wall thickness

in the vicinity of corners and T-junctions.
277
250

175

117 25
117
117

108
DOMINO Stopend Panel
Weight kg Item no.

Stopend Panel DOMINO H = 2,50m b d

[mm] [mm]
Outside piece AT 250x 3 15,10 101927 – –
AT 250x 5 16,80 108855 – –
Center piece w. waterst. MTF 250x20 27,40 101928 118 200
MTF 250x24/25 31,40 101929 158 240/250
MTF 250x30 34,80 101930 218 300
MTF 250x35/36 40,00 101931 268 350/360

MTF
1. With waterstop
AT
c

d
b
c

4.60

2. Without waterstop
c
b

d
c

Concrete cover c: c = d – b – ø Rebar

2

Stopend Panel DOMINO

H = 1,25m b d
[mm] [mm]
Outside piece AT 125x 3 7,60 101934 – –
AT 125x 5 8,45 108856 – –
Center piece w. waterst. MTF 125x20 14,80 101935 118 200
MTF 125x24/25 15,30 101936 158 240/250
MTF 125x30 17,60 101937 218 300
MTF 125x35/36 19,40 101940 268 350/360

3. For expansion joint

MTF

AT
c
b

d
c

Concrete cover c: c = d – b – ø Rebar

2

109
DOMINO Accessories
Weight kg Item no.

Alignment Coupler DRS 3,63 066080

For all panel joints.
Fillers up to 120mm wide.
Yellow galvanised.

241
52

61
Opening width 1 to 173

24
132

58
288

Wedge Clamp DKS 1,33 066081

For standard panel joints

140
not under high load.
Yellow galvanised.

50

134

25
121

Compensation Waler DAR 80 8,49 066084

For infilling and stopends. 790 60
Transfers the tie forces.
Captive connectors.
32 30

165
30

Maximum compensation 300

Lifting Hook DOMINO 500 kg 6,44 066091 60

Use 2 hooks to lift each unit!
Follow instructions for use!
≤ 30°
110
505

500 kg 500 kg
195

Lifting device to BGR 500

Permissible load: 500kg
By max angle of
137 80
inclination ≤ 30°.

110
 Weight kg Item no.

DOMINO Scaffold Bracket DG 85 6,67 066085

For mounting on horizontal or vertical struts. 850 30
With safety pin.

40 42

600
Permissible uniformly distributed
imposed load: 150kg/m2
at maximum distance of 2,00m
Accessory:
Handrail Post HSGP 3,54 034580
4.60

End Handrail Frame 55 15,00 065066

End safety handrail for all PERI scaffold
platforms and individual bracket scaffolds.
322

1020

1230
400
1645

Adjustment
max 415

739
550
160

Handrail Post HSGP 3,54 034580

Mounted on safety handrail post holder
120

DOMINO or Scaffold Bracket DG 85

35
560

1050

1300

39
Maximum width of load to be
carried = 2,00m.
Permissible span for 3x15
handrail boards = 2,10m.

Handrail Post Holder DOMINO 2,45 106877

Required from 3,0m drop, to comply with
ZH 1/603 of German Association for the
261

Building Trade. Maximum width of load to be

carried = 2,00m. Permissible span
for 3x15 handrail boards = 2,10m.
Complete with: Cotter Pin 4/1 (1x) 135
30

213

Accessories:
Handrail Post HSGP 3,54 034580

111
 Weight kg Item no.

Push-Pull Prop Connector DRA 0,94 066082

For connecting push-pull props and
kickers to horizontal and vertical struts.
Complete with: 120

Pin ø 16x42 and cotter pin 4/1

68
ø 16x42
FS 4/1

82 90

Stopend Tie DSA, galv. 1,96 066083

For transferring force from stopends
into the frame of the panel. 443
53

95
Thread DW15

134
Hook Tie DW15/400, galv. 0,64 023650

Thread DW15

58

502 20

Permissible Tension Force: 20kN.

Hook Tie Head DW15, galv. 0,42 023820

102 30
Female thread
DW15
68

Permissible Tension Force: 20kN.

Plug ø 20mm 0,002 030290

For sealing tie holes ø 20mm,
which are not required. 14
ø 23
ø 21

Supplied in packs of: 500pcs.

112
 Weight kg Item no.

Foundation Tie Clamp DOMINO DLS 2,89 066090

For tying foundation formwork in
combination with perforated foundation tie. 152

SW 14

167
90

34
m
travel 55m
Clamping

Perforated Foundation Tie, 25m roll 16,90 023020

For use with foundation tie
clamp DOMINO DLS.

22

4.60

15
50

Permissible Tension Force: 16kN.

Top Tie Bracket DAH, galv. 1,10 066086

For tying at any position along
the frame, particularly for foundations. 88
ø 20
20
40

100

100 38 26

Stacking Device DOMINO, galv. 8,44 066094

For stacking and lifting 2 to 8 DOMINO
panels of each size. Allows the panels to
be moved with the crane or fork-lift truck.
4 devices needed for each stack.
Follow instructions for use!
1150

2nd to 8th panel

with formlining
facing up

1st panel with formlining

facing
down
146

100

150
Lifting device to BGR 500
Permissible load:
250kg/device or
1000kg per stack.

113
 Weight kg Item no.

Chamfer Strip DSD 250 2,13 066088

Plastic. For DOMINO column formwork
and external corners.

2500
141
141

24
24

Stacking Device DOMINO DSH 0,02 066093

Plastic. Prevents the panels slipping. ø 30
55

ø 20 ø 30

Stacking Aid DOMINO DSW 0,03 066099 Stacking device DSH

For stacking of DOMINO panels.
4 devices needed for each stack.

2nd and subsequent

50 panels with formlining
facing up

1st panel with formlining

50

facing down

Stacking aid DSW

114
DOMINO Column Panels
Weight kg Item no.

Column Panels DS, h = 2,50m

Panels with steel frame, red.
400 350 300
Without tie hole.
200 175 150 200
DS 250x40 = 1,00m2 47,10 066035
DS 250x35 = 0,88m2 44,20 066036

250
DS 250x30 = 0,75m2 41,00 066037
DS 250x20 = 0,50m2 32,80 066038

250
250
250
250
2500

250
250
250
4.60

250
250
117
Accessories:
Chamfer Strip DSD 250 2,13 066088

Column Panels DS, h = 1,25m

Panels with steel frame, red.
Without tie hole.
DS 125x40 = 0,50m2 24,40 066055
400 350 300
DS 125x35 = 0,44m2 22,60 066056
200 175 150 200
DS 125x30 = 0,38m2 21,20 066057
DS 125x20 = 0,25m2 16,00 066058
250
250
1250

250
250
250
117

Column Panels DS, h = 0,75m

Panels with steel frame, red.
Without tie hole.
DS 75x40 = 0,30m2 16,10 066070
DS 75x35 = 0,26m2 15,10 066071
DS 75x30 = 0,22m2 14,00 066072 400 350 300
DS 75x20 = 0,15m2 9,90 066073 200 175 150 200
250
750

250
250
117

115
116
4.70 HANDSET

Page

034210 Articulated Corner HSG 90 120

034230 Articulated Corner HSG 120 120
034200 Articulated Corner HSG 150 120
034550 Brace Connector HSRA 125
034570 Bracket HSK 60 125
034540 Bulkhead Tie HST, galv. 123
030130 Cam Nut DW 15, galv. 123
034500 Clip HSC, galv. 123
034510 Compensation Waler HSR 59 122
034520 Crane Hook HSKA 123
034330 Filler Bar HSAS 90x5 121
034460 Filler Bar HSAS 90x6 121
034370 Filler Bar HSAS 120x5 121
034470 Filler Bar HSAS 120x6 121
034320 Filler Bar HSAS 150/5 121
034480 Filler Bar HSAS 150/6 121
034140 Filler Panel HSAP 90x15 121
034280 Filler Panel HSAP 120x15 121
034130 Filler Panel HSAP 150x15 121
034180 Filler Plate HSLA 90 122
034290 Filler Plate HSLA 120 122
034170 Filler Plate HSLA 150 122
034410 Filler Support HSP 90 121
034390 Filler Support HSP 120 121
4.70
034400 Filler Support HSP 150 121
034680 Foundation Tie Clamp HANDSET HLS 124
034580 Handrail Post HSGP 125
034160 Inside Corner HSE 90 120
034220 Inside Corner HSE 120 120
034150 Inside Corner HSE 150 120
034530 Locking Strip HSS 60 123
034120 Multi Panel HSM 90x45 119
034110 Multi Panel HSM 120x45 119
034100 Multi Panel HSM 150x45 119
034260 Outside Corner Angle HSW 90 120
034240 Outside Corner Angle HSW 120 120
034250 Outside Corner Angle HSW 150 120
065080 Pallet HS 120x90, galv. 126
065081 Pallet HS 150x90, galv. 126
034040 Panel HS 90x 30 119
034030 Panel HS 90x 60 119
034020 Panel HS 90x120 119
034080 Panel HS 120x 30 118
034070 Panel HS 120x 60 118
034060 Panel HS 150x 30 118
034050 Panel HS 150x 60 118
034010 Panel HS 150x 90 118
023020 Perforated Foundation Tie 124
030290 Plug Ø 20mm 126
034660 Quick Connector HSSA 10/12, galv. 124
034670 Quick Connector HSSA 14/16, galv. 124
034560 Scaffold Bracket HSK 80 125
034690 Scaffold Tube Holder HSGH 124
034360 Striking Fillet HSL 90 122
034380 Striking Fillet HSL 120 122
034350 Striking Fillet HSL 150 122
034650 Timber Holder HSKH 14, galv. 124
034620 Timber Holder HSKH 22, galv. 124
034640 Timber Strut Coupling HSRB 125
034610 Top Tie Bracket HSAH, galv. 123

117
 Weight kg Item no.

Panel HS 150x90 = 1,35m2 39,10 034010

Panel HS 150x60 = 0,90m2 27,80 034050
Panel HS 150x30 = 0,45m2 16,20 034060
Panels powder-coated, red.
With plywood Finply 12mm.

900

25 300 550 25 600 300 80

300

325
300

1500
300

850
300

325
ø 20
300

300 300 300 300 300

Panel HS 120x60 = 0,72m2 22,80 034070

Panel HS 120x30 = 0,36m2 13,20 034080
Panels powder-coated, red.
With plywood Finply 12mm.

600

25 550 25 300 80
25
300

ø 20
300

850

1200
300

325
300

300 300

118
 Weight kg Item no.

Panel HS 90x120 = 1,08m2 32,10 034020

Panel HS 90x 60 = 0,54m2 17,90 034030
Panel HS 90x 30 = 0,27m2 10,30 034040
Panels powder-coated, red.
With plywood Finply 12mm.
1200

325 850 25 80

25
300

300
250

900
300

300
300

25
300 300 300 300
ø 20

600 300
4.70

ø 20 ø 20

Multi Panel HSM

For outside corners, oblique angles,
wall offsets, wall laps and columns.
Multi Panel HSM 90x45 = 0,41m2 17,50 034120
Multi Panel HSM 120x45 = 0,54m2 22,20 034110
Multi Panel HSM 150x45 = 0,68m2 26,90 034100
Panels powder-coated, red.
With plywood Finply 12mm.
Detail x

25 25 25
325
25

ø 20
30 25 25

450
25

1500
300

850

850
1200
850

900
300

ø 20
325

325
300

25

x 300 ø 20

119
 Weight kg Item no.

Outside Corner Angle HSW

For connecting the panels
at the outside corner.
HSW 150 8,08 034250
HSW 120 6,50 034240 ø 20

80
HSW 90 4,84 034260
80

ø 20

300
ø 20

1499
300

300
1199
300

300

300
899
300

300

300
Inside Corner HSE
Inside corner for 90° corners.
HSE 150 = 0,60m2

25
26,50 034150

80
200
HSE 120 = 0,48m2 21,50 034220
HSE 90 = 0,36m2 16,30 034160

300
80

25
200

300
300
300
25

300

300
1500

300
300
300

1200
300

300

300
900

300
300

300
300

300

300
ø 20 ø 20 ø 20
25

25

25

Articulated Corner HSG

80

For all oblique layouts from 75° upwards.

HSG 150 = 0,60m2 36,10 034200
200
HSG 120 = 0,48m2 29,20 034230
HSG 90 = 0,36m2 21,80 034210
200

25

≥ 75°
250
25

384
300
250

192 25
300
25

25 25
300

300
1500
250

300

300
1200

300

300
300
900

300

300
300

250

250
250

25

25
25

120
 Weight kg Item no.

Filler Bar HSAS

For wall thickness compensation
at corners and infills.
HSAS 150x5 = 0,08m2 10,30 034320
HSAS 120x5 = 0,06m2 8,32 034370
HSAS 90x5 = 0,05m2 6,25 034330
HSAS 150x6 = 0,09m2 10,93 034480
HSAS 120x6 = 0,07m2 8,84 034470

300
HSAS 90x6 = 0,05m2 6,63 034460

25
25
300

300
25
25

1500
300

300

300
25

1200
25

300

300

300
900
300

300

300
ø 20 ø 20 ø 20

80 50 (60) 80 50 (60) 80 50 (60)

4.70

Filler Panel HSAP

For infilling.
HSAP 150x15 = 0,23m2 11,90 034130
HSAP 120x15 = 0,18m2 9,62 034280
HSAP 90x15 = 0,14m2 7,54 034140

25
25
300

300
25
25

25
300

1500
300

300
1200
300
900

300

300

ø 20 ø 20
300

300

300
25

150 80 150 80 150 80

ø 20

Formlining to be provided
Filler Support HSP by client 40
For infilling gaps with formlining.
HSP 150 4,61 034400
58

25

HSP 120 3,70 034390 ø6

49,5

HSP 90 2,75 034410

25
50

200
300
25

49,5

ø6
200
25
50

300
300

200
49,5

200
25

ø6
200
25

1499
50

200
200

300
300

300

1199
200

200
200
899

300
300

300

200

200
200

200

200
200

ø 20 ø 20 ø 20

121
 Weight kg Item no.

Filler Plate HSLA

Plate for continuously adjustable
infilling of gaps from 30 to 180mm.
HSLA 150 = 0,27m2 11,00 034170
HSLA 120 = 0,22m2 8,83 034290
HSLA 90 = 0,16m2 6,59 034180

200

80
10 180

300
300

300
1500
1200

300

300
300
900

300

300
300

25

25
25

25

25
20

50

50

50
Striking Fillet HSL
Tapered, for easy striking, especially
in narrow shafts, used in pairs.
HSL 150 2,62 034350
HSL 120 2,20 034380
46
33

13

HSL 90 1,56 034360 80

75
80

300
75
300

300
75

1500
150
300

300

ø 35 ø 35
1200

300
150
900

150

ø 35
300

300

300
75

75

75

Compensation Waler HSR 59 5,40 034510

With captive clamping wedges,
transmits the tie forces, when 590
infilling gaps, used in combination
with HST Bulkhead Tie to hold stopends,
30

stabilizes wall offsets.

110

41

160
185

122
 Weight kg Item no.

Clip HSC, galv. 0,38 034500

For connecting all elements. 125

62

50

34
Crane Hook HSKA 4,50 034520
2 per unit being lifted.
Follow Instructions for Use.
≤ 30°

500kg 500kg

ø 16
Lifting device to BGR 500
Permissible load: 500kg 285 72
by max. angle of 340
4.70
inclination of 30°.

Stopend Tie HST, galv. 0,87 034540

For transferring end force into the panel frame
and resisting tension with fillers up to 200mm.
DW 15

53
20
40 30
290

Accessories:
Cam Nut DW 15, galv. 0,32 030130

50
Cam Nut DW 15, galv. 0,32 030130
SW 27

6
25
12

50
0°

°
120
Permissible load to DIN 18216: 90kN

Top Tie Bracket HSAH, galv. 0,67 034610 20

For clamping above the formwork,
independently of the pattern of tie holes.
60

82

90

12
110
70

Locking Strip HSS 60 1,89 034530

Used as top tie above formwork over a width
from 150 to 600mm in 50mm increments. 784

306 50 50
55
80

281 50 50
5
35

123
 Weight kg Item no.

Foundation Tie Clamp HANDSET HLS 2,60 034680 42 90

For tying foundation formwork.

349

312
SW 14

90
Requires 14mm spanner.
Permissible Tension Force with Perforated l 55mm
g trave
Foundation Tie: 16kN. Clampin

Perforated Foundation Tie, 25m roll 16,90 023020

For use with PERI Foundation Tie Clamp.

22

15
50

Permissible Tension Force: 16kN

Quick Connector HSSA

With captive wedge, for quickly clamping 100 140
100x100 to 120x160mm timbers.
120 160
HSSA 10/12, galv. 1,50 034660
For timbers 10x12, 12x12
HSSA 14/16, galv. 1,68 034670
For timbers 14x12, 16x12,

260
260

respectively girder VT 16K.

125

210 250 125

60
60

Timber Holder HSKH

For quickly clamping timbers with a
depth of up to 200mm. 259
179
HSKH 14, galv. 0,20 034650 235
For timbers 12x10 155
HSKH 22, galv. 0,26 034620
8
34

For timbers 20x10, respectively VT 20K Girder.

8
34
102

102

Scaffold Tube Holder HSGH, galv 0,50 034690 40 Scaffold tube ø 48,3
For aligning HANDSET formwork
with scaffold tube ø 48mm.
117

ø 19

34
131,5

124
 Weight kg Item no.

Brace Connector HSRA 1,12 034550 ø 20 ø 16-42

FS 4/1
For fixing Push-Pull Props ø 18

170

50 50
and Kickers to the HANDSET panels.

60

14
Fitted with clip HSC (1x). 34

122

400
Timber Strut Coupling HSRB 1,10 034640
For use in connection with the 65 65 65 65 20
HSRA Brace Connector.

60

30
40
ø 17 ø5

6
Handrail Post HSGP 3,54 034580 65
For mounting on HSK 80 Scaffold Bracket.

120
35

560
4.70

1050

1300
39

Scaffold Bracket HSK 80 5,12 034560

Without any loose small parts, 923
simply engaged, self-locking.
28
10 86
120
410

489

Permissible Load: 150kg/m2

Allowable Spacing: 1,50m

Bracket HSK 60 9,49 034570

For erecting a working scaffold quickly 140
and easily at very low formwork heights. 75

895

28
10
40

1001
380

600
40

Permissible Load: 150kg/m2

Allowable Spacing: 1,50m

125
 Weight kg Item no.

Pallett HS, galv. ! Important safety note!

For stacking and transportation of When stacking light, large surface
10 HANDSET Panels. items outdoors the maximum stacking
Pallet HS 120x90, galv. 65,00 065080 height must be reduced.
Pallet HS 150x90, galv. 66,60 065081
Follow Instructions for Use.
1440 1110

1240 910

820
1070

120
580

1580

1440 1110

1240 910
820
1070

120

580

Lifting device to BGR 500

Permissible load: 750kg
Max. stacking height: 3
Min. length of rope: 3,0m

Plug Ø 20mm 0,002 030290

For sealing tie holes ø 20mm,
which are not required.
14
Supplied in packs of: 500 pcs.
ø 23
ø 21

126
 4.70

127
128
5.10 Climbing System KG

Page

029270 Advancing Screw M 24, galv. 142

026100 Anchor Chain ZAH 137
029280 Anchor Positioning Plate 15, galv. 142
026420 Anchor Positioning Stud M 24, galv. 142
026230 Anchor Sleeve M24 141
027030 Articulated Joint GT 24 134
027040 Articulated Joint TRIO 134
026180 Bracket KG 130 136
026030 Bracket KG 180 132
026050 Bracket KG 240 131
026040 Cantilever Beam KG 180 133
026060 Cantilever Beam KG 240 131
027010 Carriage FW 130
026035 Climbing Bracket KG 180 132
026055 Climbing Bracket KG 240 130
031220 Climbing Cone-2 M 24/DW 15, galv. 140
029440 Coach Screw DIN 571 6x20, galv. 142
026240 Cone for Anchor Sleeve M24 141
026160 Connector ZAH-KG 137
022230 Cotter Pin 5/1, galv. 135
027160 Counterplate for Locating Shoe 135
030050 Cutting Cost Tie Rod DW 15 / B 15 140
035700 Handrail Holder 133
026120 Handrail Post 125 for KG 133
026430 Hex. Bolt ISO 4014 M24x 70-10.9 137
103740 Hex. Bolt ISO 4016 M16x280-4.6 with Nut 135
031652 KK Concrete Cone M24-67/52 140
031658 KK Concrete Cone M24-67/52 BOL 141 5.10
051410 Ladder 180/6, galv. 138
051420 Ladder 220/6, galv. 138
109105 Ladder Base 30 adjustable, galv. 139
103718 Ladder Hook, galv. 139
104132 Ladder Safety Cage 75, galv. 138
051450 Ladder Safety Cage 150, galv. 138
026150 Lifting Eye KG 1,0t 132
027150 Locating Shoe for Articulated Joint 135
027170 Pin Ø 16x 42, galv. 135
018050 Pin Ø 16x 65/86, galv. 135
026200 Pin Ø 25x160 for KG, galv. 135
026250 Plug Ø 26mm for Anchor Sleeve M24 141
026075 Post Extension 150 KG 180 133
026085 Post Extension 150 KG 240 131
026140 Post Extension KG 180 Spec. Length 133
026170 Post Extension KG 240 Spec. Length 131
102988 Pressure Plate Articulated Joint 135
027100 Ratchet Lever SW 17 130
030960 Screw-On Cone M 24/DW 20, galv. 141
051610 Side Handrail Post 139
051430 Sliding Hatch Cover 139
065027 Spacer Tube rough DR 22 l=2.00m 140
030860 Threaded Anchor Plate DW 20 141
030840 Threaded Plate DW 15 140
030030 Tie Rod DW 15 spec. Length 140
026110 Wall Scaffold Hinge WGS 136

German Approval Certificate for KGF 240,

D No. P31-162/86.

German Approval Certificate for KG 180,

No. II B3-543-641.

129
 Weight kg Item no.

Climbing Bracket KG 240 154,00 026055

Complete with:
KG 240 Bracket, KG 240 Cantilever Beam
and KG 125 Handrail Post for Climbing
Scaffold.

1250
40 Scaffold board length 2340

38

40 Scaffold board length 1050

1097

Carriage FW 36,30 027010

Complete with: 1408
Wedge for continuously variable locking (1x)
35 1292 81
Pin ø 16x42 and Cotter Pin 4/1 (1x),
117
Pin ø 16x65/86 and Cotter Pin 4/1 (1x). View x

SW17
ø17
67 75
22
100

168

168
251

17
120

335

374
223

261

x
34
100

35

100 1024 160

ø 16x65/86
FS 4/1 ø 16x42
FS 4/1
40

70
48

13

Accessories:
60
Ratchet Lever SW 17 1,76 027100

Ratchet Lever SW 17 1,76 027100

For moving the Carriage KGF.

130
 Weight kg Item no.

Bracket KG 240 129,00 026050

Complete with:
Screw-on Coupling 48mm (2x),
Pin ø 16x42 and Cotter Pin 4/1 (1x).

2400
20 2320
1030 908 192 60

875 70
ø 16x42
FS 4/1

110
235
ø 50 ø 50

175

150

415
140
x IPE 140

250
720
View x 70
85
40
57 25

200

2530
180

1720
IPE 200
200
2079
2120

200
View y 50

200
5.10
80 100 100

321
100100

150
128
25

190

Post Extension 150 for KG 240 49,60 026085

Complete with:
Screw-on Coupling 48mm (2x), ø 25x160
Pin ø 25x160 and Cotter Pin 5/1 (2x). FS 5/1
190
41
150
13 x 100 = 1300

IPE 200
1204

1422

ø 13
150
35

Post Extension KG 240 Special Length 27,50/m 026170

41

Without Pin, Cotter Pin and

Screw-on Coupling.

Cantilever Beam KG 240 17,70 026060 1097

Complete with:
977
Hex. Bolt ISO 4017 M12x40-8.8, galv., MU (6x).
192
120 150

250

IPE 120

M12x40
100

131
 Weight kg Item no.

Climbing Bracket KG 180 110,00 026035

Complete with:
KG 180 Bracket, KG 180 Cantilever Beam and
KG 125 Handrail Post for Climbing Scaffold.

1250
40 Scaffold board length 1787

38

40 Scaffold board length 927

962

1850
Bracket KG 180 90,70 026030
Complete with: 20 1770

Screw-on Coupling 48mm (2x), 620 730 207 60

Pin ø 16x42 and Cotter Pin 4/1 (1x). ø 16x42 70
FS 4/1

110
ø 50 ø 50

235
175

150

395
View x 70
120

IPE 120
40 x
250
15
57
180

720

85
200

2510
IPE 180
2079

200
2120

View y 48
1720
200
200
200

321
80

200

128 y
150

190

Lifting Eye KG 1,0t 0,77 026150

For moving platforms without formwork
and climbing units with mounted 88 12
TRIO formwork.
123
213

114

12 46

132
 Weight kg Item no.

Post Extension 150 for KG 180 44,20 026075

Complete with: ø 25x160
Screw-on Coupling 48mm (2x), FS 5/1
190
Pin ø 25x160 and Cotter Pin 5/1 (2x).

41
150
13 x 100 = 1300

IPE 180

1422
1204
ø 13

150
35
Post Extension KG 180 Special Length 24,00/m 026140

41
48
Without Pin, Cotter Pin and
Screw-on Coupling 48mm.

962
Cantilever Beam KG 180 12,50 026040
845
Complete with: 192
Hex. Bolt ISO 4017 M12x40-8.8, galv., MU (4x)

100 140

250
IPE 100
5.10

90
M 12 x 40

80
150
Handrail Post 125 KG 8,30 026120
Complete with:
ø 17
Pin ø 16x65/86 and Cotter Pin 4/1 (1x).

550 65
1110
1410

ø9

ø 16x65/86
FS 4/1
120

50

50

65
Handrail Holder 9,81 035700 190

Up to 420mm depth.
120
460
995

min 20
max 420
70

35

185

133
 Weight kg Item no.

Articulated Joint 24 33,00 027030 min. 175 min. 175

For use with PERI VARIO GT 24.
200
Complete with:

axis GT 24
Plate for Articulated Joint (2x) with
Hex. Bolt ISO 4014 M12x110-8.8, galv., and
Hex. Nut ISO 4032 M12-8, galv. (4x). 90
Articulated Joint Connector (2x) with
Hex. Bolt ISO 4016 M12x120-4.6, galv., MU (4x).

145
Lifting Eye (1x).
Pin ø 16x42 with Cotter Pin 4/1 (1x)

U 80
180
700

ø 16x42
FS 4/1

550
130
max. 200
min. 22
TR 48x10
Load-bearing point 210
Load Capacity Lifting Eye: 1500kg

Articulated Joint TRIO 25,10 027040

For use with PERI TRIO Elements. 900

Lifting Eye (1x),

Pin ø 16x65/86 and Cotter Pin 4/1 (1x).

ø 16x65/86
FS 4/1

22
190

550
80
max. 290

25
min. 22

Load-bearing point
Load Capacity Lifting Eye: 1500kg TR 48x10

230 90
Accessories: 240
Alignment Coupler BFD, galv. (2x) 4,05 023500

134
 Weight kg Item no.

Locating Shoe for Articulated Joint KG 3,62 027150

60 60

ø 17

17

75
40
15
100 130

250
Accessoires:
Pin ø 16x65/86 (1x) 0,17 018050
Cotter Pin 4/1 (1x) 0,03 018060

130
Pressure Plate Articulated Joint 4,22 102988 t=15mm
17

120
60
ø9
316

Hex. Bolt ISO 4016

M16x280-4.6, galv. MU 0,48 103740 5.10

Counterplate for Locating Shoe 1,46 027160

100 20
6
10

110
47
27

ø 17
100
120

Pin ø 25x160, galv. 0,61 026200

ø 6,5
For Post Extension KG 180 and KG 240,
and Connector ZAH/KG.
ø 25

ø 44

135 10

160
Accessories:
Cotter Pin 5/1, galv. 0,03 022230

Pin ø 16x65/86, galv. 0,17 018050 110

88
67
ø 16

ø 24

Accessories:
Cotter Pin 4/1, galv. 0,03 018060 ø 5,5

Pin ø 16x42, galv. 0,10 027170 60

45
ø 25

Accessories:
ø 16

Cotter Pin 4/1, galv. 0,03 018060 ø5

135
 Weight kg Item no.

Bracket KG 130 37,50 026180

65 ø 48
With welded-on Handrail Post.
Can also be moved as a complete platform

120
unit, when two or more are combined
using scaffold tube and Swivel Couplings.

600

1120
12
40

1300

30
85
200

100
35

50
ø 26 80
200
ø 17

1260
ø5 ø9
ø 48

50

100
ø 17

118 230 250 240 240

80

238 240
ø 13 ø9

! Assembled formwork may not

be braced against the bracket.

Wall Scaffold Hinge WGS 7,77 026110

For KG 130, KG 180 and KG 240.
185
Complete with:
Captive Safety Pin.
172
260

ø 25 ø 22
90

45

145 10 65 ø 35

115

100
Accessories:
Hex. Bolt ISO 4014 M24x70-10.9 0,33 026430
For connecting to:
Climbing Cone 2 M24/DW15 1,03 031220
Screw-on Cone M24/DW20 0,88 030960
Anchor Sleeve M24 1,03 026230

136
 ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Anchor Chain ZAH 7,72 026100

To prevent tilting of KG 180 and KG 240.
Complete with:
Pin ø 16x42 and Cotter Pin 4/1 (2x),
Hex. Bolt M12x40 MU DIN 601, galv. (4x)
View of head plate

ø 26 100

62
14
49

100
Centre-line of chain

106

57

18
17

50

max 1200 1098 at KG 240

min 935 968 at KG 180

Position for KG 180

5.10

180
57 49

ø 16x42 ø 16x42
FS 4/1 FS 4/1 M12x40

Permiss. Tension Load: 25kN

Accessories:
Hex. Bolt ISO 4014 M24x70-10.9 0,33 026430

Connector ZAH/KG 0,47 026160

For connecting the Tension Anchor to the
KG 240 or KG 180 Bracket.

25 50
55

ø 16,3

60
16 6

26,5

Accessories:
Pin ø 25x160, galv. 0,61 026200
Cotter Pin 5/1, galv. 0,03 022230

Hex. Bolt ISO 4014 M24x70-10.9 0,33 026430

High-strength bolt (black) for anchoring
the scaffold.
SW 36
M 24

70

137
 Weight kg Item no.

Ladder 220/6, galv. 12,80 051420 25 400

Complete with:
ø 13
Hex. Bolt ISO 4017 M12x40-8.8, galv.
and Hex. Nut ISO 7042 M12-8, galv. (4x).

30
390

965
298
25

9°
2085
3 x 298 = 894

1095
220 153

20 130
M12x40
18 407 40

Ladder 180/6, galv. 13,10 051410 50

25 400
Complete with:
Hex. Bolt ISO 4017 M12x40-8.8, galv.

130 20
and Hex. Nut ISO 7042 M12-8, galv. (4x).
95

ø 13

80
80
5 x 298 = 1490

1810
1960

25
220 155

20 130

M12x40
20 405 40

Ladder Safety Cage 75, galv. 15,50 104132

Ladder Safety Cage 150, galv. 25,20 051450
Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. (4x),
Clamping plate (4x)
50

25 325 355
450

710
1500 (750)

50 79

294

M12x25

138
 Weight kg Item no.

Ladder hook, galv. 0,68 103718 SW 19

Only for the lower ladder (2x)
Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. and
Hex. Nut ISO 7042 M12-8, galv. (2x).

320
120

Ladder Base 30 adjustable, galv. 5,10 109105

443 95 ø 13
For horizontal restraint of ladders on

20
platform decking.

170

130

20
525

0 – 320
423 30

Sliding Hatch Cover 38,80 051430 5.10

Complete with: M12x25
Hex. Bolt ISO 4017 M12x25-8.8, galv. (4x)
53

and Hex. Nut ISO 7042 M12-8, galv. (4x).

ø9
830

730
50

550 60 40
Accessories:
1140
Lag Screw DIN 571 6x80, galv. 0,014 051640
TSS-Torx 6x40, galv. 0,005 024540

Side Handrail Post 6,95 051610

50

To be screwed to the end of the main

beam for supporting end handrails.
440

ø9
1270
440

340
80 80 80 80
40

ø7
190
30 60

Accessories:
80
Lag Screw DIN 571 6x80, galv. (5x) 0,014 051640
F.H. Bolt DIN 603 M8x100 MU, galv. 0,050 710240 50 100

139
 ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Climbing Cone-2 M24/DW15, galv. 1,03 031220

For anchoring climbing scaffold.
Permissible load: see product information.

25 100 SW 36

ø4

DW15
M 24
ø 49

ø28
50
Accessories:
Tie Rod DW15 Special Length or 1,44/m 030030 125 70,4
Tie Rod B15 Special Length 1,55/m 030740
Cutting Cost Tie Rod DW15/B15 030050
Threaded Anchor Plate DW20 0,60 030840

Threaded Anchor Plate DW15 0,60 030840

Permissible load see product information.
60 6

DW15
ø 27

ø 80
KK Concrete Cone M24-67/52 0,27 031652
For closing anchor points constructed with
M24/DW15 climbing cones 2.
In packs of 50 ø 40,3
ø 67,4

23,5

52

Accessories:
5kg Pack of Sealing Compound 6,13 031554

Tie Rod DW 15 1,44/m 030030

alternative:
Tie Rod B 15 1,55/m 030740
Cutting Cost Tie Rod DW 15 / B 15 030050

Spacer Tube Rough DR 22 L = 2,00m 0,41 065027

L
ø 26

ø 22

140
 ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Screw-On Cone M24/DW20, galv. 0,88 030960

For anchoring climbing scaffold.
Permissible load: see product information. 25 60 65 SW 36

M 24
ø 49

ø28
DW20
150 70,4

Accessories:
Threaded Anchor Plate DW20 0,70 030860

65 6
Threaded Anchor Plate DW20 0,70 030860
Permissible load see product information.

DW20
ø 100
ø 32
KK Concrete Cone M24-67/52 scr. 0,26 031658
For closing anchor points constructed with
M24/DW20 screw-on cones.
In packs of 50 5.10

ø 36,2
ø 67,4
23,5

52

Accessories:
5kg Pack of Sealing Compound 6,13 031554

Bolt Anchor Sleeve M24 1,03 026230

For anchoring climbing scaffold.
Permissible load: see product information.

152

120 8 100

12 ø 12
68
ø 35
ø 30

Accessories: Cone for anchor bolt sleeve M24 M24

Cone for Bolt Anchor Sleeve M24 0,013 026240
Plug ø 26mm Bolt Anchor Sleeve M24 0,005 026250

24
Cone for Bolt Anchor Sleeve M24 0,013 026240
Concrete cover 24mm 3 2
ø 50
26

34

38

Plug for Bolt Anchor Sleeve M24 0,005 026250

21
For closing the cone for the M24 bolt
anchor sleeve.
ø 24
ø 26

141
 Weight kg Item no.

Advancing Bolt M24, galv. 0,30 029270

For connecting the Bolt Anchor Sleeve M24
or Screw On Cone M24/DW20 or Climbing
Cone-2 M24/DW15 to the plywood form face,

SW 19
M24
ø 34
when it can be drilled.
20 53

70

100

Accessories:
Anchor Positioning Plate 15, galv. 0,20 029280

Anchor Positioning Plate 15, galv. 0,20 029280

When using Advancing Bolt, galv. 60
45

65
80
ø7

ø 25

6
Accessories:
Coach Screw 6x20 DIN 571, galv. (4x) 0,005 029440

Anchor Positioning M24, galv. 0,22 026420

For connecting the Bolt Anchor Sleeve M24
or Screw On Cone or Climbing Cone-2 to
the plywood form face, when it cannot be
drilled.

M24
ø 60

2,8
40 ø 4,8

Accessories:
14mm Allen key, long 0,45 027212
Nail 30 x 80 (4x) 0,005 710312

142
 5.10

143
144
5.20 Climbing System CB

Page

051110 Adjustable Brace CB 164-224 148

051130 Adjusting Unit CB 160 147
029270 Advancing Screw M 24, galv. 157
027212 Allan Key SW 14, long 157
029280 Anchor Positioning Plate 15, galv. 157
026420 Anchor Positioning Stud M 24, galv. 157
051260 Belt Connector CB 150
051270 Belt Connector Wall 150
051020 Carriage CB 240 146
051100 Climbing Bracket CB 160 147
051000 Climbing Bracket CB 240 146
031220 Climbing Cone-2 M 24/DW 15, galv. 156
029440 Coach Screw DIN 571 6x20, galv. 158
051640 Coach Screw DIN 571 6x80, galv. 153
051640 Coach Screw DIN 571 6x80, galv. 158
024520 Coach Screw DIN 571 8x160, galv. 158
051090 Connector TRIO-CB 149
030050 Cutting Cost Tie Rod DW 15 / B 15 156
F.H. Bolt DIN 603 158
051230 Finishing Platform Beam CB 152
051160 Handrail Connector CB 150
035700 Handrail Holder 153
051210 Handrail Post 190 152
051190 Handrail Post 200 152
051220 Handrail Post 370 152
051030 Height Adjusting Unit CB 149
029560 Hex. Bolt ISO 4014 M24x120-10.9 157
051630 Intermediate Handrail Post CB 153
031652 KK Concrete Cone M24-67/52 156
031658 KK Concrete Cone M24-67/52 BOL 156
051410 Ladder 180/6, galv. 154
051420 Ladder 220/6, galv. 154 5.20
109105 Ladder Base 30 adjustable, galv. 155
103718 Ladder Hook, galv. 155
104132 Ladder Safety Cage 75, galv. 154
051450 Ladder Safety Cage 150, galv. 154
051010 Lifting Eye CB 240, galv. 147
051120 Platform Connection CB 160 148
051200 Platform Post 225 151
051050 Post Extension 180 for CB 151
051040 Rack CB 240 147
027180 Ratchet Lever SW 19 146
029470 Scaffold Mounting Ring 15, galv. 157
026415 Scaffold Tube 48.3x3.2, galv. per m 158
026417 Scaffold Tube Cost per Cut 158
030960 Screw-On Cone M 24/DW 20, galv. 156
017040 Screw-On Coupling AK 48, galv. 158
051610 Side Handrail Post 153
051430 Sliding Hatch Cover 155
031480 Socket Wrench SW 36, cromatized 157
051060 Strongback 270 CB 148
051150 Strongback 380 CB 148
051080 Strongback Connector-2, galv. 149
017010 Swivel Coupling DK 48/48, galv. 158
107007 Tension Anchor Connector CB 150
107008 Tension Anchor Connector Wall 150
051250 Tension Belt L=5.70 m / 25 KN 150
030860 Threaded Anchor Plate DW 20 156
030840 Threaded Plate DW 15 156
030030 Tie Rod DW 15 spec. Length 156
024540 TSS-Torx 6x40, galv. 158
024690 TSS-Torx 6x80, galv. 158

German Approval Certificate for CB 240,

D No. P31-95/91.

German Approval Certificate for CB 160,

No. II B4-540-136/91.

145
CB Climbing Scaffold and Accessories
Weight kg Item no.

Climbing Bracket CB 240 112,00 051000

Complete with:
50
Captive Locking Pin, 30 2381

50
Screw-on Coupler 48mm (2x),
Handrail Post with Hex. Bolt
ISO 4014 M16x80-8.8, galv., ø9

440
and Hex. Nut ISO 7042 M16-8, galv. (1x)

1100
ø 50
36
75 1030 1030

440
ø 17

80 20
350
ø 26

165
150

400

3212
ø 17
1800

00
10

ø 17
280
80

160 80 80
80
448

5°

80
5°

Accessories:
Cotter Pin 4/1 0,030 018060

Carriage CB 240 34,10 051020

Complete with:
Captive Gear Locking Wedge 1175 250
60
for locking in any position. 25 160 900
ø 26 ø 26 SW 19
45
360 (VT 16K)
80
440 (GT 24)

625

Centre-line of bracket
140

1030 98

180

Accessories:
Ratchet Lever SW 19 1,76 027180

Ratchet Lever SW 19 1,76 027180

For moving the Carriage CB 240.

146
 Weight kg Item no.

Rack CB 240 8,97 051040

Complete with: ø 16x65/86
Pin ø 16x65/86 and FS 4/1
Cotter Pin 4/1 (1x).
64

2240
430 900

35

30
10
Lifting Eye CB 240, galv. 0,93 051010
ø 20
Complete with:
Pin ø 16x65/86 and Cotter Pin 4/1 (1x).

140
93
62
Load-bearing point FS 4/1 ø 16x65/86
Permiss. Load: 700kg

Climbing Bracket CB 160 79,50 051100

Complete with:
Captive Locking Pin, 50
1672
Screw-on Coupler 48mm (2x),
Handrail Post with Hex. Bolt
ISO 4014 M16x80-8.8, galv.,
and Hex. Nut ISO 7042 M16-8, galv. (1x)

80 50
705 (1025)
5.20

440
ø9
1490

80
30 15 985
x

440
140 450 150
140 170
ø 21 ø 21
50

630

2815 (3135)
60 250

50

Detail x
1620

ø 17
1100

ø 21 M16x80
1800
1870

40 50 50

ø 26
30
70 200

80

ø 17 80
100 90

Adjusting Unit CB 160 12,90 051130 230

Complete with: 120
Hex. Bolt ISO 4014 M20x150-8.8, galv., 50 80
and Hex. Nut ISO 7042 M20-8, galv. (2x).
SW 19
35

ø 26
237

M20x150
150

52

200 83
Centre-line 260
of bracket

147
 Weight kg Item no.

Platform Connection CB 160 4,58 051120

For easy connection of platform surface 20
on to CB 160 Climbing Bracket.
Complete with: 50

70
Hex. Bolt ISO 4014 M20x130-8.8, galv., ø9
with Spring Washer DIN 128 A20 FST, galv.,

55
and Hex. Nut ISO 4032 M20-8, galv. (2x)

110
235
M20x130

90
40

20
45 50 35
Centre-line
130 of bracket 90
Load-bearing point
Permiss. Load: 500kg

Strongback 270 CB 76,00 051060 U 120

For formwork heights up to 3,60m.
ø 25

Strongback 380 CB 104,00 051150

For formwork heights from 3,60 to 5,40m.
Complete with:
Pin ø 25x180 and Cotter Pin 4/1 (1x).

196

27 x 60 = 1620
86 U 120

ø 25

8x60=480

56

3800
240

ø 26 ø 26

30 30
1430
1430

2730
587
1510

7 x 60 = 420

7 x 60 = 420
800

195

195
240

240
45

ø 25x180 ø 25x180
Permiss. Load: 1900kg FS 4/1 FS 4/1

Adjustable Brace CB 164-224 25,00 051110

For exact adjustment of inclination.
Complete with:
Pin ø 25x180 and
Cotter Pin 4/1 (2x).
1580
ø 25x180 60
ø 89

FS 4/1
ø 50

min. 1640 - max. 2240

148
 Weight kg Item no.

Height Adjusting Unit CB 5,55 051030

For easy height adjustment of
VARIO wall formwork panels.
Complete with: TR 30x6 65
Pin ø 25x180 and Cotter Pin 4/1 (1x). ø 25x180
FS 4/1

Adjustment range 182

Strongback

100
190
240

82
30 68

65
60
SW 19

Requires 19mm spanner.

Adapter TRIO/CB 13,50 051090

For the connection of TRIO Panels
on to the CB Strongbacks.
Horizontal or vertical use is possible.
With built-in height adjustment.
Complete with:
Pin ø 25x180 and Cotter Pin 4/1 (1x).

415

345
SW 19

75

ø 25x180
5.20
Adjustment range

FS 4/1
Strongback
400
100
75

62,5

42

82

180
Axis Strongback

Connection to Connection to vertical

horizontal strut strut
100

100

360 360

Requires 19mm spanner.

Strongback Connector-2, galv. 2,14 051080

For the connection of Steel Walers
SRZ U100 up to U140 on to
Strongback CB 270 and 380.
120
35

76
max. 172

16

170

149
 Weight kg Item no.

Handrail Connector CB 0,90 051160

Enables handrails to be formed
by means of scaffold tube ø 48mm.

103

60
Accessories: 60 ø 48
F.H. Bolt DIN 603
41
M8x70 MU, galv. 0,038 024140

Tension anchor connector CB 3,41 107007

Used to resist wind loads, if statically
required.
Complete with:
hex. bolt ISO 4014-M16x100-8.8, galv.
and hex. nut ISO 7042 M 16-8, galv.
30 400

64
Accessories:
tie rod DW 15 special length 1,44/m 030030
wall tension connector 3,88 107008

Wall tension connector 3,88 107008

Used to resist wind loads,
if statically required.

45
180

57

Complete with::

100
Bolts 16-42, galv. and
57

cotter pin 4/1, galv.

Accessories:
Hex. Bolt ISO 4014 M24x70-10,9 0,33 026430

Tension Belt L = 5,70m, 25kN 2,79 051250

Used when statically required
to resist wind load.
Permissible Tension Force = 25kN
app. 1000
min. 1600 - max. 5700

Accessories:
Belt Connector (1x) 3,29 051260
Belt Connector Wall (1x) 1,62 051270

Belt Connector 3,29 051260

For connecting Tension Belt L = 5,70m, 25kN 400

to the Brackets CB 240 or CB 160. 340

59
25

ø 20 M16x100

Belt Connector Wall 1,62 051270

For connecting Tension Belt L = 5,70m, 25kN
0
12

to the following anchor. ø 50

80

ø 25

Accessories: 12
100
Hex. Bolt ISO 4014 M24x70-10,9 0,33 026430

150
 Weight kg Item no.

Platform Post 225 44,40 051200

For pour heights up to 3,60m.
M16x130

30
In combination with Post Extension 180 for
pour heights from 3,60m up to 5,40m
Complete with:

200
Hex. Bolt ISO 4014 M16x130-8.8, galv.,
and Hex. Nut ISO 7042 M16-8, galv. (2x)

500

800
200

60
U 80

2510
1000
1750
ø 22

ø 17
5.20
200
30

86

Post Extension 180 for CB 26,40 051050

For pour heights from 3,60 up to 5,40m. 80 80
Complete with: M16x130
20

Hex. Bolt ISO 4014 M16x130-8.8, galv.,

and Hex. Nut ISO 7042 M16-8, galv. (2x)
200
500

995
200

1800

2040
1195

80
200

ø 17
20

151
 Weight kg Item no.

Platform Cantilever Beam CB 17,00 051230 232 965

For Finishing Platforms. 80 50
M16x130 M16x130

30
Complete with:

30
ø7
Hex. Bolt ISO 4014 M16x130-8.8, galv.,

200
270
200
and Hex. Nut ISO 7042 M16-8, galv. (4x).

25 150

30 100
30

80
30 80
ø 17

80
16 965
1230

86
Handrail Post 200 17,40 051190 M16x130

30
Basic extension for Handrail Post 190
and 370.
Complete with:
Hex. Bolt M ISO 4014 M16x130-8.8, galv.,
and Hex. Nut ISO 7042 M16-8, galv. (1x).

1125
156

500
2225

440
280
ø 17

80
200

440
80
500

ø 17

385
200

60
30

25 140

Handrail Post 190 19,00 051210

For pour heights up to 3,60m.
A B C
Handrail Post 370 34,60 051220
Handrail Post 190 2155 1 x 500 = 500 1895
For pour heights from 3,60 up to 5,40m.
Complete with: Handrail Post 370 3955 5 x 500 = 2500 3695
Hex. Bolt ISO 4014 M16x130-8.8, galv.,
and Hex. Nut ISO 7042 M16-8, galv. (2x).

M16x130 U 80
200

ø9
B
80
A

440
C

80
440

ø 17
80
330
200
30

25

152
 Weight kg Item no.

End Handrail Post CB 11,10 051630

To be screwed to the outer main

50
beam for supporting the handrail,
to limit the handrail span.

440
ø9

8
1270

440

8
ø7

30 60 120
230

190
110 80 80 80

30 50

Accessories: 280
Lag Screw 6x80 DIN 571, galv. (6x) 0,014 051640

Side Handrail Post 6,95 051610

To be screwed to the
end of the main beam
50
for supporting end handrails.
440

5.20

6
ø9
1270
440

340

80 80 80 80

40

ø7
190
30 60

Accessories: 80

Lag Screw 6x80 DIN 571, galv. (5x) 0,014 051640 50 100

Handrail Holder 9,79 035700

190
For easy and quick clamping to the
platform for supporting handrails. 30 65
Adjustable from 20 up to 420mm.
120
460

995
min. 20

max. 420

70
35

185

153
 Weight kg Item no.

Ladder 220/6, galv. 12,80 051420

Complete with: 25 400

Hex. Bolt ISO 4017 M12x40-8.8, galv. ø 13

and Hex. Nut ISO 7042 M12-8, galv. (4x).

30
390

965
298
25

9°
2085
3 x 298 = 894

1095
220 153

20 130
M12x40
18 407 40

Ladder 180/6, galv. 13,10 051410 50

25 400
Complete with:
Hex. Bolt ISO 4017 M12x40-8.8, galv.

130 20
and Hex. Nut ISO 7042 M12-8, galv. (4x).
95

ø 13

80
80
5 x 298 = 1490

1810
1960

25
220 155

20 130

M12x40
20 405 40

Ladder Safety Cage 75, galv. 15,50 104132

Ladder Safety Cage 150, galv. 25,20 051450
Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. (4x),
Clamping plate (4x)
50

25 325 355
450

710
1500 (750)

50 79

294

M12x25

154
 Weight kg Item no.

Ladder Hook, galv. 0,68 103718

Only for the lower ladder (2x) SW 19
Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. and
Hex. Nut ISO 7042 M12-8, galv. (2x).

320
120

Ladder Base 30 adjustable, galv. 5,10 109105

For horizontal restraint of ladders on
443 95 ø 13
platform decking.

20
170

130

20
525

0 – 320
423 30

Sliding Hatch Cover 38,90 051430

Complete with: M12x25
Hex. Bolt ISO 4017 M12x25-8.8, galv. (4x) 5.20
and Hex. Nut ISO 7042 M12-8, galv. (4x).
53

ø9
830

730
50

550 60 40

1140

155
Anchoring CB ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Screw-On Cone M24/DW20, galv. 1,03 030960

For anchoring climbing scaffold.
Permissible load: see product information. 25 60 65 SW 36

DW 20
M 24
ø 49

ø28
150 70,4

Accessories:
Threaded Anchor Plate DW20 0,70 030860

Threaded Anchor Plate DW20 0,70 030860

65 6
Permissible load see product information.

DW 20
ø 100
ø 32
KK Concrete Cone M24-67/52 scr. 0,26 031658
For closing anchor points constructed with
M24/DW20 screw-on cones.

ø 36,2
ø 67,4
In packs of 50

23,5

52
Accessories:
5kg Pack of Sealing Compound 6,13 031554

Climbing Cone-2 M24/DW15, galv. 1,03 031220

For anchoring climbing scaffold.
Permissible load: see product information.
25 100 SW 36

ø4
DW 15
M 24
ø 49

ø28

50
Accessories: 125 70,4
Tie Rod DW15 Special Length or 1,44/m 030030
Tie Rod B15 Special Length 1,55/m 030740
Cutting Cost Tie Rod DW15/B15 030050
Threaded Anchor Plate DW15 0,60 030840

Threaded Anchor Plate DW15 0,60 030840

60 6
Permissible load see product information.
DW 15
ø 27

ø 80

KK Concrete Cone M24-67/52 0,27 031652

For closing anchor points constructed with
M24/DW15 climbing cones 2.
ø 40,3
ø 67,4

In packs of 50
23,5

52

Accessories:
5kg Pack of Sealing Compound 6,13 031554

156
 ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Scaffold Mounting Ring 15, galv. 0,73 029470

For mounting Climbing Brackets 72,5
CB 240 and CB 160.

ø 24,5
ø 58

ø 73
ø 50
Accessories: 65
Hex. Bolt ISO 4014 M24x120-10.9 0,54 029560

Anchor Positioning Stud M24, galv. 0,22 026420

For connecting the Bolt Anchor Sleeve M24
or Screw On Cone or Climbing
Cone-2 to the plywood formface,
when it cannot be drilled.

M24
ø 60
2,8
40 ø 4,8
Accessories:
Nail 3,0x80 (4x) 0,05 710312
14mm Allen Key, long 0,45 027212

Advancing Bolt M24, galv. 0,30 029270

For connecting the Bolt Anchor Sleeve M24

SW 19
M 24
or Screw On Cone M24/DW20 or Climbing ø 34
Cone-2 M24/DW15 to the plywood formface,
when it can be drilled. 20 53

70 5.20
100

19mm across flats.

Anchor Positioning Plate 15, galv. 0,20 029280 60

When using Advancing Bolt, galv. 45

ø7
65

80

ø 25

Accessories:
Coach Screw 6x20 DIN 571, galv. (4x) 0,005 029440
6

Hex. Bolt ISO 4014 M24x120-10.9 0,54 029560

Hex. Bolt ISO 4014 M24x 70-10.9 0,33 026430 SW 36
High strength bolt (black) for scaffold
anchoring.
M 24

120/70

36mm across flats.

Allen Key 14mm, long 0,45 027212

For unscrewing M24, M30 and M36
anchor positioning studs.

90° Socket spanner SW 36 2,50 031480

For tightening and loosening scaffold
M24/DW15 climbing cones or M24/DW20
screw-on cones.
Length approx. 500mm

157
Erection Accessories
Weight kg Item no.

Screw-On Coupling AK, galv. 0,85 017040

With welded Pin M20x32.

Width across flats 30mm and 19mm.

Swivel Coupling DK 48/48mm, galv. 1,22 017010

Width across flats 19mm.

Scaffold Tube Steel 48,3x3,2 L = 1,0m 3,55 026411

L = 2,0m 7,10 026412
L = 3,0m 10,65 026413
L = 4,0m 14,20 026414
L = 5,0m 17,75 026419
L = 6,0m 21,60 026418
Special Length 3,55/m 026415
Cutting Costs for Scaffold Tubes 026417

Coach Screw DIN 571, galv.

Requires 13mm spanner.

M6x20 0,005 029440

M6x80 0,014 051640
M8x160 0,052 024520

F.H. Bolt DIN 603 MU, galv.

Including nut.

M6x100 0,030 024280

M6x180 0,06 051650
M8x100 0,05 710240
M8x125 0,06 024360

TSS-Torx, galv.
For Torx-Bits TX 30. Self-tapping.

6x40 0,005 024540 40

ø 4,3

6x80 0,010 024690

ø 12

ø6

80 (40)
Torx 30

158
 5.20

159
160
5.30 Single Sided Climbing System SKS

Page

029240 Adjustable Joint SKS 167

029450 Advancing Screw M 30, galv. 170
029460 Advancing Screw M 36, galv. 170
027212 Allan Key SW 14, long 170
029380 Anchor Positioning Plate 20, galv. 170
029390 Anchor Positioning Plate 26, galv. 170
026450 Anchor Positioning Stud M 30, galv. 170
026460 Anchor Positioning Stud M 36, galv. 170
030920 Climbing Cone-2 M 30/DW 20, galv. 168
030940 Climbing Cone-2 M 36/DW 26, galv. 169
029440 Coach Screw DIN 571 6x20, galv. 170
029200 Compression Brace 2 SKS, 1.35-1.95m 163
029210 Compression Brace 3 SKS, 1.75-2.35m 163
029220 Compression Brace 4 SKS, 2.55-3.15m 163
030800 Cutting Cost Tie Rod DW 20 / DW 20 168
030500 Cutting Cost Tie Rod DW 26 169
029130 DAM Scaffold Bracket SKS 180 162
029140 DAM Scaffold Bracket SKSF 240 162
104756 Finishing Platform Post SKS 3 164
104757 Finishing Platform Post SKS 4 164
104754 Finishing Platform Waler SKS 164
104755 Handrail Post SKS 165
029540 Hex. Bolt ISO 4014 M30x130-10.9 168
029550 Hex. Bolt ISO 4014 M36x130-10.9 169
029420 Hex. Bolt ISO 4017 M30x 70-8.8, galv. 168
029430 Hex. Bolt ISO 4017 M36x 70-8.8, galv. 169
029320 H-Kicker SKS 166
105585 Lifting Chain, 2-Strands, 6.0m, adj. 166
027180 Ratchet Lever SW 19 170
029610 Ratchet Wrench 1" 170
072180 Ratchet Wrench 1/2 " 170
029310 Scaffold Jack SKS 90 165
029480 Scaffold Mounting Ring 2-20, galv. 168
029490 Scaffold Mounting Ring 2-26, galv. 169
029620 Socket SW 19-1/2" 170
029630 Socket SW 46-1" 170 5.30
029640 Socket SW 55-1" 170
105588 Spreader Beam 2.5t 166
051080 Strongback Connector-2, galv. 163
029300 Tension Anchor SKS 20 167
029290 Tension Anchor SKS 26 167
030860 Threaded Anchor Plate DW 20 168
030870 Threaded Anchor Plate DW 26 169
030700 Tie Rod DW 20 Spec. Length per m 168
030340 Tie Rod DW 26 Spec. Length 169
029150 V-Strongback 12-2 163
029160 V-Strongback 12-3 163
029170 V-Strongback 14-3 163
029180 V-Strongback 14-4 163

161
SKS Climbing Scaffold and Accessories
Weight kg Item no.

Climbing Bracket SKSF 240 226,00 029140

Complete with:
Adjusting Unit and Carriage SKSF 26 (1x),
2521
Locking Pin ø 25x240 (1x),

50
Screw-on Coupling 48mm (2x), 2400
Handrail Post (1x) with

500
Hex. Bolt ISO 4014 M16x80-8.8, galv., 120 15x60=900
and Hex. Nut ISO 7042 M16-8, galv. (2x). 340

1230
180 ø9

500
30 M16x45 ø 26
80
25
SW 19

35

50
230
96

160

660
ø 26

350
240 ø 26

500
ø 25x240

60

1103 1068
2480

2204

1250

150
70

50

100
290 100
ø 17
268

Accessories:
Insert Socket SW 19 1,76 027180

Climbing Bracket SKS 180 177,00 029130

Complete with:
1921
Adjusting Unit SKS 26 (1x),
Locking Pin ø 25x240 (1x),

50
Screw-on Coupling 48mm (2x), 1800
Handrail Post (1x) with

500
120 900
Hex. Bolt ISO 4014 M16x80-8.8, galv.,
and Hex. Nut ISO 7042 M16-8, galv. (2x). 340
1230

180 ø9
30 M16x45 500
80
SW 19 ø 26
25
80
35

50
230
96

160

660

240
350

ø 26
500

ø 25x240

60

1571
2480

2204

1250

150
70

50

100 100
290
ø 17
268
Accessories:
Insert Socket SW 19 1,76 027180

162
 Weight kg Item no.

V-Strongback SKS
Complete with: 230 190

Height adjusting spindle (1x) U 120, U 140 80

with Hex. Bolt ISO 4017 M16x50-8.8, galv., ø 17
with U-Washer 18 DIN 434, galv.,

65
and MU ISO 4032 M16-10, galv.(2x).

6x15°
Compression Brace Adapter (1x) with Hex. Bolt
ISO 4017 M16x50-8.8, galv. , with U-Washer 18
DIN 434, galv., and MU ISO 4032 M16-10, galv.(4x).
Pin ø 25x280 (1x) with Cotter Pin 4/1 (2x).

700
V-Strongback 12-2 88,40 029150
L = 2200, Profile U120
ø 26
V-Strongback 12-3 105,00 029160
L = 2800, Profile U120

6x100=600
M16x50
V-Strongback 14-3 121,00 029170
L = 2800, Profile U140

L
L+300
V-Strongback 14-4 154,00 029180
L = 3800, Profile U140

SW 19

ø 25x280
FS 4/1
185

Load-bearing point
Permissible load: 4000kg, with
5.30
160
sling chains at ≤ 30° to the vertical

Strongback Connector-2, galv. 2,14 051080

For the connection of Steel Walers SRZ
120
35

76

U100 up to U140 on to V-Strongback.

max 172

17

170

Compression Brace SKS

Complete with:
Pin ø 25x180 (2x) with Cotter Pin 4/1 (4x).

Compression Brace 2 SKS, 1,35-1,93m 34,40 029200

Compression Brace 3 SKS, 1,75-2,33m 38,90 029210
Compression Brace 4 SKS, 2,55-3,13m 48,80 029220
100

ø 25x180 L
FS 4/1

For load capacity refer to PERI Formwork Design Tables

163
 Weight kg Item no.

SKS Finishing platform hanger

Complete with:
Hex. Bolts ISO 4014 M16x130-8.8, galv. (2x)
and Hex. Nut ISO 7042 M16-8, galv. (2x)

SKS 3 Hanger L = 1500 20,20 104756

SKS 4 Hanger L = 2000 25,40 104757

U 100 50
M16x130

50
150
100
SKS Guardrail post
L

M16x30

SKS Finishing platform beam

SKS Finishing platform beam 14,90 104754

Complete with:
Hex. Bolt ISO 4017 M16x30-8.8, galv. (2x)
and Hex. Nut ISO 7042 M16-8, galv. (2x)

60
M16x30
120

95

200
80

375 1000

1485

164
 Weight kg Item no.

SKS Guardrail post 6,60 104755

Complete with:
Hex. Bolts ISO 4014 M16x80-8.8, galv. (2x)
and Hex. Nut ISO 7042 M16-8, galv. (2x)

50

50
ø9

500

1480
500
100
M16x80

5.30
SKS 90 Scaffold bracket 15,20 029310
Used as concreting platform bracket when
mounted on the V-strongback, or in
connection with the SKS Adjustable Joint as
access platform with inclined SKS
50

Climbing Brackets. ø9
Complete with:
Pin 16x205mm (1) with cotter pin 4/1 (1)
Pin 16x165mm (1) with cotter pin 4/1 (2)
500
1400

500

100 120

120

60 900

ø 16x165
FS 4/1
60

ø 16x205
FS 4/1

165
 Weight kg Item no.

H-Kicker SKS 32,60 029320

Additional component for the first lift.
Complete with:
Screw-on Coupling 48mm (1x).

150 1100 86
ø 26
370
ø 60 Double tie yoke

255
75 100

215
ø 26
15
100 40 1230 65

76
15

Crane Pick-up Spreader 2,5 t 129,00 105588

For moving Scaffold and Formwork Units.

3700
100
50
160

Lifting device to
Follow instructions BGR 500
for use! Perm. load: 2500kg

120
Accessories:
2 Sling assembly, 6m, with shortener 19,00 105585

2 Sling assembly, 6m, with shortener 19,00 105585

max. ca. 6000

Load capacity [kg] of angle of inclination

0-45° 45-60° 0-45° 45-60°
2800 2000 2240 1600
Crane slings to BGR 500

166
 Weight kg Item no.

Tension Anchor SKS 125

Used when statically required ø 25x180
to resist wind load. FS 4/1

Without Tie Rod DW15.

Complete with:
Pin ø 25x180 (2x) with

200
Cotter Pin 4/1 (4x),
Wingnut DW15, galv. (2x).

35
Tension Anchor SKS 20 10,70 029300
For Climbing Cone M30/DW20

Tension Anchor SKS 26 10,60 029290 Tie rod DW15

For Climbing Cone M36/DW26 provided by client

L
Tie rod DW15
provided by client

35
200
5.30
ø 25x180

70
FS 4/1

ø 36,5 SKS 26
ø 30,5 SKS 20
125

Accessories: Calculation of required tie rod length.

Hex. Bolt ISO 4017 M30x70-8.8 (Assumption: Anchor location and
M30x70, galv. For SKS 20 (1x) 0,59 029420 pour height is same for each lift)
Hex. ISO 4017 M36x70-8.8 SKSF 240
M36x70, galv. For SKS 26 (1x) 0,93 029430
Tie Rod DW15 Special Length 1,44/m 030030 L= (b – 9)2 + 2292 – 20
Cutting Cost Tie Rod DW15 030050 b= Pour height (cm)

Adjustable Joint SKS 6,18 029240

When using Scaffold Bracket SKS 90
as access platform on the Climbing
Bracket SKS.
Adjustable in increments of 15°.
Complete with: 15°
15° 15° 15° 72
° 15
Hex. Bolt ISO 4014 M16x110-8.8, galv., 15 °
and Hex. Nut ISO 7042 M16-8, galv. (2x).
120

ø 50 ø 17
260

ø 17
10

M16x110
105

120
60
135 110

290

167
Anchoring SKS ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Climbing Cone-2 M 30/DW20 1,67 030920

For anchoring climbing scaffold.
Permissible load: see product information 25 117 SW 46
ø6

DW20
ø 59
M30
72

142 84

Accessories:
Tie Rod DW20 2,56/m 030700
Threaded Anchor Plate DW20 0,70 030860

KK Concrete Cone M30-80/52 0,40 031653

For closing anchor points with
climbing-cone-2 M 30/DW 20.

ø 80,5

ø 50,5
23,5

Pack of 50 52
Accessories:
5kg Pack of Sealing Compound 6,13 031554

Scaffold Mounting Ring 2-20, galv. 1,83 029480

For mounting climbing brackets
SKSF 240 und SKS 180.
90

ø 30,5

ø 60

ø 88
ø 85

Accessories:
Hex. Bolt ISO 4014 M30x130-10.9 (1x) 0,92 029540
For Climbing Cone-2 M30/DW20.

Hex. Bolts 130

High strength bolt for scaffold anchoring. 72
Hex. Bolt ISO 4014 M30x130-10.9 0,92 029540 SW 46

Hex. Bolt ISO 4017 M30x70-8.8 0,59 029420

M30

70 SW 46
M30

Threaded Anchor Plate DW20 0,70 030860 65 6

Permissible load: see product information

DW20
ø 100
ø 32

Tie Rod DW20 Special Length 2,56/m 030700 L

Non-weldable!
Permissible load to DIN 18216: 150kN.
Observe certification requirements!
Cutting Cost Tie Rod DW20 / B20 030800

168
 ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Climbing Cone-2 M 36/DW26 3,04 030940

For anchoring climbing scaffold.
25 137 SW 55
Permissible load: see product information
ø6

DW26
M36
ø 74
93 95
162

Accessories:
Tie Rod DW26 4,48/m 030340
Threaded Anchor Plate DW26 1,20 030870

KK Concrete Cone M36-90/52 0,57 031654

For closing anchor points with
climbing cone-2 M 36/DW 26.

ø 65,3
ø 90,5
23,5
Pack of 50
52
Accessories:
5kg Pack of Sealing Compound 6,13 031554

Scaffold Mounting Ring 2-26, galv. 1,72 029490

For mounting climbing brackets
SKSF 240 und SKS 180. 90

ø 36,5
ø 85

ø 70

ø 98
Accessories:
5.30
Hex. Bolt ISO 4014 M36x130-10.9 (1x) 1,40 029550
For Climbing Cone-2 M36/DW26.

Hex. Bolts 130

SW 55
High strength bolt for scaffold anchoring. 84
Hex. Bolt ISO 4014 M36x130-10.9 1,40 029550
Hex. Bolt ISO 4017 M36x70-8.8 0,93 029430
M36

70 SW 55
M36

Threaded Anchor Plate DW26 1,20 030870 70 6

Permissible load: see product information

DW26
ø 40

120

Tie Rod DW26 Special Length 4,48/m 030340 L

Non-weldable!
Permissible load to DIN 18216: 250kN.
Observe certification requirements!
Cutting Cost Tie Rod DW26 030500

169
 Weight kg Item no.

Advancing Bolt, galv.

For positioning of Climbing Cone-2
M30/DW20 or M36/DW26 on
form face, when it can be drilled.
Advancing Bolt M30, galv. 0,28 029450
Advancing Bolt M36, galv. 0,30 029460

M30/ø 44

M36/ø 44

SW 19
M30

M36
20 53
70
100

Requires 19mm spanner.

Anchor Positioning Plate, galv.

60
When using Advancing Bolt, galv..
45
Anchor Positioning Plate 20, galv. 0,20 029380
Anchor Positioning Plate 26, galv. 0,20 029390 ø 30,5/ø 37

80
65
ø7

Accessories:

6
Coach Screw 6x20 DIN 571, galv. (4x) 0,005 029440

Anchor Positioning Stud, galv.

For positioning of Climbing Cone-2
M30/DW20 or M36/DW26 on
form face, when it cannot be drilled.
Anchor Positioning Stud M30, galv. 0,25 026450
Anchor Positioning Stud M36, galv. 0,32 026460 SW 14 ø 4,5

ø7

M30
2,8 M36
73
Accessories: 30

14mm Allen key, long 0,45 027212

Nail 30 x 80 (4x) 0,005 710312

Ratchet Wrench 1/2" 0,56 072180

Overall length about 270mm.
Ratchet Wrench 1" 5,30 029610
Overall length about 700mm.

Socket SW 19-1/2" for M12 0,08 029620

Socket SW 46-1" for M30 0,58 029630
Socket SW 55-1" for M36 1,00 029640

Ratchet Lever SW19 1,76 027180

For moving the Carriage SKSF 240.

170
 5.30

171
172
5.40 Internal Platform BR

Page

108162 Bearing Box BR 175

020610 Crane Eye BR 0,4t 175
105401 Crane Eye BR 2.5t 175
020330 Folding Bearing Plate 25 175
020600 Gravity Pivot Plate BR 174
026430 Hex. Bolt ISO 4014 M24x 70-10.9 175
020320 Platform Beam BR U100 174
020510 Platform Beam BR U120 174
020310 Platform Beam BR U140 174
020520 Platform Beam BR U160 174
020620 Spacer for Platform Beam BR 175

5.40

173
BR Shaft Platforms and Accessories
Weight kg Item no.

Platform Beam BR With gravity pivot plate With folding bearing

As main beam for shaft platforms. plate 25
Permissible spans see PERI Tables.

Platform Beam BR U100 Special Length 21,80/m 020320

Platform Beam BR U120 Special Length 28,00/m 020510
Platform Beam BR U140 Special Length 32,80/m 020310
Platform Beam BR U160 Special Length 38,60/m 020520

The listed Item no. is for the

platform beams only. (2 pcs.)
Required accessories are to be
ordered separately.

565 BR Crane eye 2.5t with

Spacer for Platform Beam BR

ø 21

50

100-
160
50
115 273 54 123

Spacer for Platform Beam BR

Accessories:
BR Spacing (spacing ≤ 700mm) 0,56 020620

BR Crane eye 2,5t (2x) or 2,21 105401 max. 700

BR Crane eye 0,4t (2x) 2,09 020610

Folding Bearing Plate 25 (2x) or 12,10 020330

Gravity Pivot Plate BR (2x) 6,74 020600

Gravity Pivot Plate BR 6,74 020600

2 per Platform Beam.
Complete with:
Hex. Bolt ISO 4014 M20x90-8.8, galv.
and Hex. Nut ISO 7042 M20-8, galv. (1x).

130 237
ø 80
SW 30
70
48
65

75 125

437

120 M20x90

Perm. load: 38kN

(when using BR profile U100)
45

52
80

See PERI tables.

Accessories:
Bearing Box BR 1,61 108162

174
 Weight kg Item no.

234 50
Folding Bearing Plate 25 12,10 020330
For supporting Platform Beams BR. ø 25 axis of
Eliminates the need of wall box-outs. anchorage

140
350

291
163

258

Perm. load: 25kN

See PERI tables.
Accessories: 200
Hex. Bolt ISO 4014 M24x70-10,9 0,33 026430 60

Spacer for Platform Beam BR 0,56 020620

Max. Spacing e = 700mm.
Number depends on length of Platform Beams.
52 M20x90
Complete with: SW 30
Hex. Bolt ISO 4014 M20x90-8.8, galv.,
and Hex. Nut ISO 7042 M20-8, galv. (1x).

Crane Eye for Platform Beam BR 0,4t 2,09 020610

2 per Platform Beam.
Complete with:
Hex. Bolt ISO 4014 M20x90-8.8, galv.,
ø 50
and Hex. Nut ISO 7042 M20-8, galv. (2x).
165
85

M20x90
SW 30
30

54 10 5.40
100 52
Load-bearing point
Perm. Load: 400kg

BR Crane eye 2,5t 2,21 105401

2 per Platform Beam. 100 max. 24°
ø 60
135
245

Load-bearing point
Perm. Load: 2,5t
Accessories:
Spacer for Platform Beam BR 0,56 020620

Bearing Box BR 1,61 108162

Gives the required box-out in the M24
concrete when using Gravity Pivot Plates.
30°

210
170
150

120 70
Accessories: 140
Advancing Bolt M24, galv. 0,30 029270

175
176
5.50 Platform System FB 180

Page

029270 Advancing Screw M 24, galv. 188

027212 Allan Key SW 14, long 188
026636 Anchor Loop 189
029280 Anchor Positioning Plate 15, galv. 188
026420 Anchor Positioning Stud M 24, galv. 188
026230 Anchor Sleeve M24 186
051270 Belt Connector CB-2 183
026651 Bracket Strut FB 180-3 180
030130 Cam Nut DW 15, galv. 183
026627 Compression Strut FB-2 180
029440 Coach Screw DIN 571 6x20, galv. 188
026240 Cone for Anchor Sleeve M24 186
026626 Corner Frame FBE 183
018060 Cotter Pin 4/1, galv. 183
710326 F.H. Bolt DIN 603 M 8x60 w.N, galv. 182
026631 Finishing Platform Bracket FBN-2 182
026625 Finishing Platform FBN-2/300 179
026652 Folding Bracket FB 180-3 182
026649 Folding Corner Platform FEB 180-3/300 178
026648 Folding Platform FB 180-3/300 178
026635 Handrail Extension FB 184
026637 Handrail FB-300 181
026628 Handrail Post FBP 184
026430 Hex. Bolt ISO 4014 M24x 70-10.9 186
029560 Hex. Bolt ISO 4014 M24x120-10.9 186
026629 Horizontal Strut 181
026622 Intermediate Platform FBZ 240 179
031658 KK Concrete Cone M24-67/52 BOL 187
026645 Loop Mounting Head-2 FB 189
026638 Mounting Extension ASG for Anchor Loop 189
026632 Mounting Head FB 186
715357 Pin Ø 16x150, galv. with washer 183
026644 Pipe Bracing Connector, galv. 182
026250 Plug Ø 26mm for Anchor Sleeve M24 186
026641 Plywood Board 81x298, FBN-2 181
026640 Plywood Board 168x236, FBZ 240 181
026639 Plywood Board 169x298, FB 180-2 181
026530 Safety Net 6,0x2,0m/100mm mesh 184
029470 Scaffold Mounting Ring 15, galv. 187
026415 Scaffold Tube 48.3x3.2, galv. per m 184
026417 Scaffold Tube Cost per Cut 184
026647 Screw Plate DW 15/115, galv. 179
030960 Screw-On Cone M 24/DW 20, galv. 187
031480 Socket Wrench SW 36, cromatized 188
026623 Support Extension 200 FB-2 180
5.50
026624 Support Extension 300 FB-2 180
051250 Tension Belt L=5.70 m / 25 KN 183
030860 Threaded Anchor Plate DW 20 187
026646 Transportation Fork FB, galv. 185
026990 Wall Scaffold Hinge FB 186

D -PR
ÜFZ
ER
BG

Bau
94121

geprüfte
Sicherheit

177
FB 180-3 and Accessories
Weight kg Item no.

Folding Platform FB 180-3/300 318,00 026648 Uniformly distributed imposed load: 300kg/m2
With continuous 45mm thick staging and Up to 450kg/m2 for special applications.
folding handrail frame and brackets.
Complete with strut FB 180-3 (2x)
and mounting head FB (2x).
For work and protective access to DIN 4420.
100 120

Detail x ø 30

110
70
35
200
1690 ø9

385 1120

1040
x

14x50=700 200
1752

2055
160
2000

ø9
Folding Corner Platform FEB 180-3/300 486,00 026649
Unit fully preassembled from FB 180-3/300 ø 48,3
Folding Platform and FBE Corner Frame.
Complete with strut FB 180-3 (2x)
and mounting head FB (2x).

ø 13
100

100

ø 48,3

2500
2980

Stacking height Folding platform

260
260
355

178
 Weight kg Item no.

Intermediate Platform FBZ 240 117,00 026622 1645

With continuous 45mm thick staging and
folding removable handrail frame.
For work and protective access to DIN 4420.

1030
130
1420

ø 32 ø 32

1745

1080
Bracket axis 1800

2414

Stacking height of intermediate platform

90
90
90
Uniformly distributed imposed load: 300kg/m2

Screw Plate DW15/115, galv. 0,60 026647

For connecting the FB 180-2 Folding Bracket
to the Intermediate Platform FBZ.
2 per bracket.

B15
100

50

60 10 115

Finishing Platform FBN-2/300 118,00 026625 805 5.50

For attaching to support extension ø9
200 or 300 FB-2.
With continuous 45mm thick staging and
folding handrail frame.
For work and protective access to DIN 4420.
Stacking height of finishing platform
1040

1260

165 165
270

900

Nail-hole ø 9

ø 48,3

2980
Uniformly distributed imposed load: 150kg/m2

179
 Weight kg Item no.

Support Extension 200 FB-2 29,50 026623

Support Extension 300 FB-2 42,30 026624
Galvanized.
For extending the bottom compression
point by 0.60 to 2.00m or 1.50 to 3.00m.
Adjustable in 100mm increments.

160

2793
3013

3013
17x100=1700

2037
2037

14x100=1400
1620

100
100

175
175
120
240 80 240 80 115
320 435 200
Accessories for 300 FB-2:
Compression Strut FB-2 21,20 026627

Compression Strut FB-2 21,20 026627

Required when using the
Support Extension 300 FB-2.

152
3139
50

180

3234

Bracket Brace FB 180-3 11,30 026651

For assembling Folding Platform
Folding Corner Platform and
Folding Bracket.
Complete with:
Captive Pin ø 22 (2x)

ø 22
50 2150

180
 Weight kg Item no.

Horizontal Strut 10,10 026629

Complete with:
Hex. Bolt ISO 4017 M16x45, galv. (4x)
Hex. Nut ISO 7042 M16-8, galv. (4x)
ø 48,3

160
2400

(Bracket axis 2500) 60

Handrail Frame FB-300 34,20 026637

Accessories for mounting on
FB 180-3/300 Folding Platform or
FBN-2 Finishing Platform.
Hex. Bolt ISO 4014 M8x100, galv. (2x) 0,050 710285
Hex. Bolt ISO 4014 M8x60, galv. (2x) 0,031 710284
Self-cleaning nut M8, galv. (4x) 0,005 024090
2980
ø9

30

60
399
1040

60
386

60
2500

Plywood Board
45mm thick Plywood Boards.
FB 300 169x298 108,70 026639
FBZ 240 168x236 85,60 026640
FBN-2 81x298 51,30 026641
5.50

FB 300 FBZ 240 FBN-2

1690 1680 810
2360
1800
2980

2980

181
 Weight kg Item no.

Folding Bracket FB180-3, complete 82,00 026652 Handrail ø9

Complete with: foldable when
used
strut FB 180-3 (1x) and ø 48,3

1085
mounting head FB (1x).
Edge of wall 385 1120 320

18x50=900
2055

2010
ø 13

160
95
2000

180
40 80
17x80=1360 80

390
Accessories:
For fitting the sheet of plywood:
F.H. Bolt DIN 603 M8x60 Mu, galv. (8x) 0,03 710326 2055

Scaffold Tube Connector, galv. 2,29 026644

For connecting Scaffold Tube ø 48,3mm 30
100
to the bracket for special platforms with
a non-standard bracket spacing.
260

Complete with:
100

Hex. Bolt ISO 4017 M16x45-8.8, galv. (2x)

Hex. Nut ISO 7042 M16-8, galv. (2x)
30

60
150

M16x45 w. n.

Finishing Platform FBN-2 15,90 026631

60

30

ø9
490

ø 48,3
1085

30

100
140 590
175

885 170

Finishing bracket shown folded

1275

Accessories:
270

For fitting the sheet of plywood:

F.H. Bolt DIN 803 M8x60 Mu, galv. (6x) 0,03 710326

182
 Weight kg Item no.

Corner Frame FBE 178,00 026626

Powder coated. Complete with:
Hex. Bolt ISO 4017 M16x45-8.8, galv. and
Hex. Nut ISO 7042 M16-8, galv. (6x)
1000 200 100 200 1000
Allows any FB 180-3/300 Folding Platform
to be used as a corner platform. Cannot be 12 888 100 400 100 888 12
The folding platform cantilevers 1,55m connected
here
past the corner of the building.

433
3x50

150
450
2x50

1845
1928

1320
170°

257
100 100 2400

Tension Belt L = 5,70m, 25kN 2,79 051250

Used when statically required
to resist wind load.
Connected to the Folding Bracket with
additional Pin ø 16x150,
Item No. 715357 and
Cotter Pin 4/1, Item No. 018060. 1000
5.50
max. 5700
Permissible Tension Load: 25kN min. 1600

Belt Connector Wall 1,62 051270 100

For connecting the Tension Belt L = 5,70m, 25kN 50
to the remaining anchor.
0
12
30°
80

Accessories:
25
Hex. Bolt ISO 4014 M24x70-10,9 0,33 026430

Cam Nut DW15, galv. 0,32 030130

For attaching as base plate for RSS
to the multi-purpose connector with DW 15. 50
SW 27

6
25
12

50
0°

°
120

Accessories:
Tie Rod DW15 Special Length 1,44/m 030030

183
 Weight kg Item no.

Handrail Post FBP 6,90 026628

Screwed onto the folding bracket from

120
above with DW15 thread.
ø 48,3

503
1005

382
90
DW15

120

120
Handrail Extension FB 3,74 026635
For extending handrails up to h = 2,00m.
Complete with:
Scaffold tube
Welded-on scaffold tube coupler. coupler
ø 48,3

977

1143
ø 38

Protection Net 6000x2000mm 2,40 026530 6000

Side protection net for roofing scaffold, 100
of high-resistance polypropylene,
5mm thick, without knots.
Net type A2 to DIN EN 1263-1.
100

Energy resistance 4.2kJ

Colour: Green
2000

Licensed by the Construction Trades

Accident Association.

Scaffold Tube Steel 48,3x3,2 L = 1,0m 3,55 026411

L = 2,0m 7,10 026412
L = 3,0m 10,65 026413
L = 4,0m 14,20 026414
L = 5,0m 17,75 026419
L = 6,0m 21,60 026418
Special Length 3,55/m 026415

Cutting Costs for Scaffold Tubes 026417

184
 Weight kg Item no.

Transportation Fork FB 180-3, galv. 202,00 026646

Perm. load: 750kg
which corresponds to a folding corner platform
with support extension and finishing platform.

! DANGER:
Follow Instructions for Use!
Not approved for transporting personnel.
Do not shift stacks.
Comply with the instructions for use
given on the type plate.
1

3
2

6°

120 1301

4567

2870
ø 25x180
705

type

80
plate
1621
1756

5.50
Lifting device to 1360
BGR 500 1600
Perm. load: 750kg

4
Used in following positions: Handle
1055

1 FB 180-3/300 Folding Platform or

FBZ 240 Intermediate Platform

2 FEB 180-3/300 Folding Corner Platform 4670

and/or FBN-2 Finishing Platform.

3 Empty
(for entering platform stack)

4 Transportation position
(hang from 2 handles)

185
Anchoring FB 180-3 ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Mounting Head FB 6,30 026632 Mounting axis

For mounting the Folding
Platform on the FB Wall Scaffold Hinge FB

35
or Scaffold Mounting Ring 15.

329

200
125 46

130

Wall Scaffold Hinge FB 2,95 026990 25

For mounting the FB 180-2/300 Folding
Platform with Mounting Head FB.
Allows mounting point to be moved

75
± 25mm laterally.

200
70
30

55
45 25
98
70 118
Accessories:
Hex. Bolt ISO 4014 M24x70-10,9 0,33 026430

Bolt Anchor Sleeve M24 1,03 026230

For anchoring the folding platform with
the wall scaffold hinge FB.
Permissible load see product information. 152

120 8 100

12 ø 12
68
ø 35
ø 30

Cone for anchor bolt sleeve M24 M24

Accessories:
Cone for Bolt Anchor Sleeve M24 0,013 026240
Plug ø 26mm Bolt Anchor Sleeve M24 0,005 026250

24
Cone for Bolt Anchor Sleeve M24 0,013 026240
Concrete cover 24mm 3 2
ø 50
26

34

38

Plug for Bolt Anchor Sleeve M24 0,005 026250 21

For closing the cone for the M24 bolt
anchor sleeve.
ø 24
ø 26

Hex. Bolt ISO 4014-10,9

M24x70 0,33 026430 SW 36
M24x120 0,54 029560
High-strength bolts (black)
M24

for anchoring scaffolds.

70

(120)

186
 ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Screw-On Cone M24/DW20, galv. 1,03 030960

For anchoring the folding platform with
the wall scaffold hinge FB.
Permissible load: see product information

25 60 65 SW 36

M24

ø 49
ø 28
DW
20
150 70,4

Accessories:
Threaded Anchor Plate DW20 0,70 030860

KK Concrete Cone M24-67/52 scr. 0,26 031658

For closing anchor points with
screw-on cone M 24/DW 20.

ø 36,2
ø 67,4
23,5

52

Pack of 50
Accessories:
5kg Pack of Sealing Compound 6,13 031554

Threaded Anchor Plate DW20 0,70 030860

Permissible load: see product information
65 6

5.50
DW20
ø 100
ø 32

Scaffold Mounting Ring 15, galv. 0,73 029470

For mounting the FB 180-3/300 Folding
Platform with Mounting Head FB.
For connecting to
Screw-on Cone M24/DW20 or
Climbing Cone-2 M24/DW15.
72,5
ø 24,5
ø 58

ø 73
ø 50

65

Accessories:
Hex. Bolt ISO 4014 M24x120-10,9 0,54 029560

187
 ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Advancing Bolt M24, galv. 0,30 029270

For connecting the Bolt Anchor Sleeve M24
or Screw On Cone M24/DW20 or Climbing
Cone-2 M24/DW15 to the plywood form face,

SW 19
when it can be drilled.

M24
ø 34
20 53

70

100

Accessories:
Anchor Positioning Plate 15, galv. 0,20 029280

Anchor Positioning Plate 15, galv. 0,20 029280

When using Advancing Bolt, galv.
60
45

65
80
ø7

ø 25

6
Accessories:
Coach Screw 6x20 DIN 571, galv. (4x) 0,005 029440

Anchor Positioning M24, galv. 0,22 026420

For connecting the Bolt Anchor Sleeve M24
or Screw On Cone or Climbing Cone-2 to
the plywood form face, when it cannot be
drilled. M24
ø 60

2,8
40 ø 4,8

Accessories:
14mm Allen key, long 0,45 027212
Nail 30 x 80 (4x) 0,005 710312

Allen Key 14mm, long 0,45 027212

For unscrewing M24, M30 and M36
anchor positioning studs.

90° Socket spanner SW 36 2,50 031480

For tightening and loosening scaffold
M24/DW15 climbing cones or M24/DW20
screw-on cones.
Length approx. 500mm

188
 ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Loop Mounting Head-2 FB 5,30 026645

For mounting the Folding Platform
on the Anchor Loop.

140

100
250
121

375
200
121

Accessories:
Anchor Loop
2 per anchor location. 1,10 026636

Anchor Loop 1,10 026636

Always use in pairs.
740

220

ø 10
120

70
Height Extension for Loop 18,00 026638
For hanging the Folding Platform 600
to a maximum of 700mm lower than
with the Loop Mounting Head-2 FB.

5.50
702
984
200

124 117

Accessories:
Anchor Loop
2 per anchor location. 1,10 026636

189
190
5.60 Platform System ASG 160

Page

027212 Allan Key SW 14, long 202

026636 Anchor Loop 201
026420 Anchor Positioning Stud M 24, galv. 202
026230 Anchor Sleeve M24 202
026520 Bracket ASG 160 196
105845 Bracket ASG 70-100 203
026526 Bracket Connector ASG 196
105907 Clip for Bracket 70/100 203
026523 Compression Strut ASE 195
026522 Compression Strut ASG 199
026240 Cone for Anchor Sleeve M24 202
026527 Corner Plate ASG 196
026512 Corner Platform ASE 195
103513 Drop-in Corner ASU 90° 194
065066 End Handrail Frame 55 198
710326 F.H. Bolt DIN 603 M 8x60 w.N, galv. 203
026583 Handrail Extension ASG 192
103753 Handrail Extension ASU 194
101079 Handrail Extension ASZ 193
026528 Handrail Holder 105 ASG 198
104675 Handrail Post ASG 198
026529 Height Adjusting Internal Corner ASE 197
026535 Heigth Adjusting ASG 197
026430 Hex. Bolt ISO 4014 M24x 70-10.9 202
026581 Intermediate Platform ASZ 240, Mesh 193
026580 Main Platform ASG 160/240, Mesh 192
026532 Mounting Extension ASG 197
026536 Mounting Plate ASG 201
105843 Platform ASG 70-100/240 203
105844 Platform ASG 70-100/298 203
026250 Plug Ø 26mm for Anchor Sleeve M24 202
108870 Pre-Cast Wall Mounting ASG 204
026582 Rear Handrail Section ASE 195
101085 Rear Handrail Section ASG 192
101083 Rear Handrail Section ASZ 193
026647 Screw Plate DW 15/115, galv. 196
108869 Sleeve for pre-cast wall mounting ASG 204
031480 Socket Wrench SW 36, cromatized 202
026521 Support Extension 370 ASG 199
026533 Transportation Fork ASG 160, galv. 200
104958 Wall Scaffold Hinge ASE 201
026531 Wall Scaffold Hinge ASG 201

5.60
-
5.70

D -PR
ÜFZ
ER
BG

Bau
95001

geprüfte
Sicherheit

191
ASG 160 and Accessories
Weight kg Item no.

Main Platform ASG 160/240, Mesh Panel 225,00 026580 Unif. distributed imposed load: 200kg/m2
With continuous 39mm thick staging and Up to 300kg/m2 for special applications.
folding handrail frame and brackets.
For work and protective access and
roof safety platform according to DIN 4420.

1038
153 1000
250
86

83
700

2027
1179
142

120
1712

2336

Accessories:
Rear Safety Mesh Panel ASG 34,10 101085 2000
Pin ø 16x55x50 ST, galv. (2x) 0,09 710682 2413
Sleeve 4x26, galv. (2x) 0,001 710683
Plywood Board ASG 160/240 68,70 026541

Handrail Extension ASG 23,40 026583

For extending the main platform
ASG 160/240, mesh panel

48
2336
2040

1000
1150

ø4

2326

192
 Weight kg Item no.

Intermediate Platform ASZ 240, 103,00 026581 Unif. distributed imposed load: 200kg/m2
Mesh Panel
With continuous 45mm thick staging
and folding, removable handrail frame. 1384

1027
125 1065

ø 32

1483

1077
1880

2404
Accsessories:
Rear Safety Mesh Panel ASZ 28,50 101083
Plywood Board ASZ 240 71,36 026540

Handrail Extension ASZ 22,50 101079

For extending the intermediate platform
ASG 160/240, mesh panel

48
2459

1013

965
1995

ø4

2343
54

5.60
-
5.70

193
 Weight kg Item no.

Corner Platform ASU 90° 92,90 103513

Safe and easy bridging over right
angled external corners without any

Guardrail height
extra anchoring.
Completely foldable.

85 Stacking height

1000

1060
1200

AS
G
70
15

2964 / Stacking width

0
20

2615
ASU
90°
1340
20
0

G
AS

Uniformly distributed imposed load: 200kg/m2

Handrail Extension ASU 25,40 103753

For extending the guardrail of the 90° ASU
Corner Platform, for example when used as
a roof safety scaffold.
Extension height
1013

966

2556

410

194
 Weight kg Item no.

Corner Platform ASE 84,30 026512

With continuous 39mm thick staging.

39
For internal and external corners.

266
1947
1820

1820
ø 32

1065 128

65
Internal corner

21
1065 216
Accessories: External corner
Plywood Board ASG 160/240 57,60 026542

7
41
Accessories:
Rear Safety Mesh Panel ASE (2x) 23,30 026582

1656
Rear Safety Mesh Panel ASE 23,30 026582 1500 48
For corner platforms ASE, or corner

160
solutions with separate brackets ASG,
and for extension.

1308
1089
ø4

5.60
-
5.70
2 pcs rear safety mesh panel required
per corner platform (4 pcs for extensions).

Compression Strut ASE 13,10 026523

For bracing ASE corner platforms at
external corners when handling as a
complete unit.

2614
552
600

195
 Weight kg Item no.

Bracket ASG 160 32,50 026520 1562

Incorporated in main platforms ASG 160/240. 86
For supplementing end and corner platforms.
Can also be used as single bracket.

46
Can be stacked with built-in
stacking device.

700
ø 48

2165
1985
1176
142

120

32
1712

60
60

60 60
60

Corner Plate ASG 1,55 026527 16

For supporting ASG 160 brackets at

26
right angled external corners.
Complete with: 60
Pin ø 16x42 and Cotter Pin 4/1 (2x).

225
90°

210

Bracket Connector ASG 8,94 026526

For connecting the ASG 160 bracket to
intermediate or corner platform, or as
a complete unit for lifting for special
applications.
227

95 1065 250

DW15
Bracket axis
60

1275

Accessories:
Screw Plate DW15/115, galv. (2x) 0,60 026647

Screw Plate DW15/115, galv. 0,60 026647

For connecting the ASG 160 bracket
adapter to the ASZ intermediate
or ASE corner platform.
B 15
100

50

60 10 115

196
 Weight kg Item no.

Heigth Adjusting ASG 27,90 026535

For mounting ASG higher by 1,25m
or lower by 0,70m. For the use on Main
Platform Corner Platform and single
Bracket ASG 160.

721
620
700

1330
1250

2025

814
1220
193

180
Mounting Extension ASG 18,40 026532 86
For mounting ASG lower by 0,70m
main platform, corner platform and
separate bracket.

620
700

700
1523
750
168
253

5.60
-
5.70
Height Adjusting Internal Corner ASE 15,00 026529
For lowering the internal corner ASE
by 0,70m, or raising the internal corner
ASE by 0,70m or 1,25m.
382

1,25m higher

370
0,70m higher 0,70m lower
1625
1365

1250

155
815

700

585
700

155

28 56 28

197
 Weight kg Item no.

Guardrail post ASG 4,26 104675

For stabilizing the ASE Rear safety mesh
190
panel when using the ASE corner platform
ø5 ø 48
as a crane unit and as a guardrail post for
ASG brackets.

170
SW 14

Height of safety handrail above top

30-80 mm

410

of staging 1.05m

1132
260
55

292
Handrail Holder 105 ASG 4,20 026528 65
Handrail boards are nailed.
For mounting on ASG 160 brackets.

120

Height of safety handrail above top

ø 55

410
ø5

of staging 1.05m

1112
285
275

55
126

End Handrail Frame 55 15,00 065066

End safety handrail for all PERI
scaffold platforms and individual bracket
scaffolds.

322
1020

1230

400
1645

Adjustment

739
550
max 415

160

198
 Weight kg Item no.

Support Extension 370 ASG 19,10 026521

For continuously adjustable extension of the
bottom pressure point from 2,70 to 4,40m.
The ASG Compression Strut must be used.

adjustable from 2.70 to 4.40 to centre-line of support

785

2886
1706

245
60

165 295

Accessories:
Compression Strut ASG 15,20 026522

Compression Strut ASG 15,20 026522

Required when using the Support
Extension 370 ASG.

5.60
-
5.70
3581

158

116

199
 Weight kg Item no.

Transportation Fork ASG 160 129,00 026533

For moving main platforms, intermediate
platforms, e.g. for projecting roofs.

80 934

4131

2947
705

40
1460

Type
plate
1560

1000
1200

Transit position
845

4136

Lifting device to BGR 500

Permissible load: 350kg

! Danger:
Not approved for transporting personnel.
Do not lift stacks!
Comply with the instructions for use
given on the type plate.
Follow Instructions for Use.

200
Anchoring ASG 160 ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Wall Scaffold Hinge ASG 7,73 026531

For suspending the ASG 160 on concrete
constructions. Wall formwork of up to ø 25
5.40m in height can be carried.

40

70

70

116
240
200
150

Accessories: 180

Bolt Anchor Sleeve M24 1,03 026230

Hex. Bolt M24x70 DIN 931-10,9 0,33 026430

40
Wall Scaffold Hinge Internal Corner ASE 3,23 104958
For suspending the corner platform ASE

40
25
with right-angled internal corners.

110
170
Wall formwork up to a maximum of 5,40m
high can be erected.

200

200

245
Accessories:
Bolt Anchor Sleeve M24 (2x) 1,03 026230
Hex. Bolt ISO 4014 M24x70-10,9 (2x) 0,33 026430 245

Anchor Loop 1,10 026636 740

Always use in pairs. 220

ø 10
120

70

5.60
-
Mounting Plate ASG 11,20 026536 5.70
For subsequent formation of mounting
points. The wall is continued above the
mounting plate, which is subsequently
withdrawn from the inside.
Fixing with flush, removable heavy duty t = 12 Opening for wrecking bar
ø 22
expansion bolts.
180

220
80

175 75

750

Warning:
No use possible near external corners
where brickwork is continued.

201
 ! Important Safety Note: Only
anchor the scaffold with components
Weight kg Item no. specified by PERI for the purpose!

Bolt Anchor Sleeve M24 1,03 026230

Permissible load: see product information.

152

120 8 100

12 ø 12
68

ø 35
ø 30
Accessories: Cone for anchor bolt sleeve M24 M24
Cone for Bolt Anchor Sleeve M24 0,013 026240
Plug ø 26mm for Bolt Anchor Sleeve 0,005 026250

Cone for Bolt Anchor Sleeve M24 0,013 026240 24

For Bolt Anchor Sleeve M24 and
3 2
Anchor Sleeve DW15.
Concrete cover 24mm.

ø 50
26

34
38

Plug ø 26mm for Bolt Anchor Sleeve 0,005 026250

For closing the cone for anchor sleeve M24.
21

ø 24
ø 26

Hex. Bolt ISO 4014 M24x70-10,9 0,33 026430

High-strength bolt (black)
for anchoring scaffolds.
SW 36 M24

70

36mm across flats.

Anchor Positioning Stud M24, galv. 0,22 026420

For connecting the Bolt Anchor Sleeve
to the plywood form face,
when it cannot be drilled.
M24
ø 60

2 8
ø 4,8
Accessories: 40
Nail 30 x 80 (4x) 0,005 710312

Socket Spanner 36mm, chromium-plated 2,46 031480

For manipulating M24 scaffold anchor
system bolts and climbing cones.
Length about 500mm.

Allen Key 14mm, long 0,45 027212

For unscrewing M24, M30 and M36
anchor positioning studs.

202
 Weight kg Item no.

Platform ASG 70-100x240 45,10 105843 Unif. distributed imposed load: 150kg/m2
Platform ASG 70-100x298 50,00 105844
1056
Working platform with robust platform decking
For tight working spaces. Telescopic. 150 470 45
Platform width can be extended by means of 88 7x40=280
planking.

90
Stacking

631

100
100
137
64

240
200

2500

2980
2000

2400
Accessories:

240
200

Handrail Post HSGP (2x) 3,54 034580

Wall Scaffold Hinge ASG (2x) 7,73 026531

Bracket ASG 70-100 12,10 105845 165 469 95 45

7x40=280
As individual bracket or for special platforms 88
with planking.
90
631

5.60
-
5.70
64

112

Accessories:
112 90 90

Handrail Post HSGP 3,54 034580

Wall Scaffold Hinge ASG 7,73 026531
Clip for Bracket ASG 70-100 0,05 105907

57
Clip for Bracket ASG 70-100 0,05 105907
for mounting decking components.
58

100

Accessories:
F.H. Bolt M8x60 DIN 603 MU 0,03 710326

203
 Weight kg Item no.

Pre-Cast Wall Mounting ASG 6,19 108870 Max. live loads on ASG platforms
Adapter for mounting of platforms restricted 150kg/m2.
ASG 70-100 or ASG 160 in pre-cast cavity walls. Cavity wall to be separately verified!
Utilisation without lost parts.
Complete with:
Sleeve for pre-cast wall mounting ASG.

520

231
340
368

67

78
98
Sleeve for pre-cast wall mounting ASG 0,71 108869
Reusable, high impact-resistant plastic sleeve.
Spray with PERI releasing agent before
concreting.

204
 5.60
-
5.70

205
206
6.10 RAPID Column

Page

103724 Access Ladder 180/2, galv. 210

037190 Brace Connector -3 RAPID, galv. 208
037210 Chamfer Strip RAPID l=3.0m 208
037270 Column Frame 60, Alu 208
037260 Column Frame 210, Alu 208
037250 Column Frame 300, Alu 208
037410 Concreting Landing 211
037400 Concreting Platform, complete 211
037440 Crane Hook Concreting Platform 211
037320 Crane Lifting Unit -2 RAPID 209
037420 Handrail 52, galv. 211
037430 Handrail 134, galv. 211
051410 Ladder 180/6, galv. 210
051460 Ladder Base, galv. 210
103369 Ladder Connector RAPID, galv. 209
103718 Ladder Hook, galv. 210
104132 Ladder Safety Cage 75, galv. 210
051450 Ladder Safety Cage 150, galv. 210
037160 Locking Pin Ø 20x205, galv. 209
030440 Spherical Nut DW 15, galv. 209
037150 Tie Yoke DW 15 209

6.10

207
 Weight kg Item no.

Column Frames RAPID, Alu 794 794

For column cross section up to 600x600mm.
Complete with:
Clamping Profile, Column Tie Yoke DW15,

250
250
Spherical Nut DW15, galv., Locking Pin
ø 20x205, galv., and Hex. Bolt ISO 4017
M20x50-8.8, galv. with Hex. Nut
ISO 7042 M20-8, galv. (2x).

800
1000

2100

800
3000

500

250
1000

794

600
250

300
800

500 64
60 654 80
243

23
120

M20x50
ø 21 25 19x30=570

Column Frame 300 59,90 037250

Column Frame 210 42,70 037260
Column Frame 60 14,30 037270

Chamfer Strip RAPID L = 3,00m 0,32 037210

For clamping plywood to the Column
Frames RAPID. 15 20
5
15

20

35

Brace Connector-3 RAPID, galv. 3,05 037190 290

For fixing Push-Pull Props and
ø 16
Kicker Braces to the Column Frames RAPID.
Complete with:
Locking Pin ø 20x205, galv. (1x)
165
205

Pin ø 16x42, (1x), and Cotter Pin 4/1 (2x).

ø 16x42
FS 4/1
ø 20x205
FS 4/1
DW15
20

208
 Weight kg Item no.

Crane Lifting Unit-2 RAPID 14,00 037320

4 for a fully assembled column form. 400 118
Only 2 needed when a concreting platform
is used. 118 400
500

ø 18

100
ø 22
119
798
Load-bearing point 250
Permissible load: 500kg

Column Tie Yoke DW15 0,60 037150

For tying RAPID Column Frames.
290
Comes with the RAPID Column Frames.
For Column Frame 300 (4x), 210 (3x), 60 (1x)

DW15
42
ø 21

28
Permissible Load to DIN 18216: 90kN

Locking Pin ø 20x205, galv. 0,74 037160

125
For tying RAPID Column Frames.
Comes with the RAPID Column Frames.

ø 20
For Column Frame 300 (4x), 210 (3x), 60 (1x)
Complete with:
Cotter Pin 4/1 (1x)
205

ø 34
120

20

FS 4/1

SW 27
Spherical Nut DW 15, galv. 0,49 030440
For tying RAPID Column Frames.
Comes with the RAPID Column Frames.
For Column Frame 300 (4x), 210 (3x), 60 (1x)
68

106

6.10

Permissible Load to DIN 18216: 90kN DW15

Ladder connector RAPID, galv. 6,58 103369

For connecting ladders to RAPID
column frames.
50
260

Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. (2x) and
Clamping plate (2x)
195

230
178

469
SW 19
661

209
 Weight kg Item no.
Eyes for security chain
Ladder 180/6, galv. 13,10 051410
25 400 50 534 50
Access Ladder 180/2, galv. 11,10 103724
Complete with: ø 13

95
400

20
Hex. Bolts ISO 4017 M12x40-8.8, galv. and

130
80
Hex. Nut ISO 7042 M12-8, galv. (4x)

80

1200
5 x 298 = 1490

1810
1960

1885
298
25
155

168
SW 19

220

220
130
20
20 405 40 20 405

Accessories:
Formwork chain 3kN, 2,5m 1,37 065073

Ladder Hook, galv. 0,68 103718

Only for the lower ladder (2x) SW 19
Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. and
Hex. Nut ISO 7042 M12-8, galv. (2x)

320
120

Ladder Base 2,36 051460

For preventing the ladders sliding.

405 50
25 100

53
210

130
40

13

Ladder Safety Cage 75, galv. 15,50 104132

50

Ladder Safety Cage 150, galv. 25,20 051450

Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. (4x),
750 (1500)

Clamping plate (4x)

50

25 325 355
450

710

79

294

210
 Weight kg Item no.

Concreting Platform, complete 126,00 037400

Used for TRIO, RAPID and QUATTRO columns.
Consisting of:
Concreting Landing (1x)
Handrail 52 galv. (2x)
Handrail 134 galv. (2x)
Crane Hook Concreting Platform (3x)

Concreting Landing, Alu 51,50 037410 1524

Powder-coated 1420
Suitable for any cross section up to a
1340
maximum of 600x600mm. It is mounted
525
with the Crane Hook Concreting Platform. 130
40

40
525
710
500

1524
ø 20

ø 14

adjustable
840 620
Permissible Load: 150kg/m2

Handrail 52, galv. 10,50 037420 Eyes for security chain

Handrail 134, galv. 18,10 037430 ø 38
2 of each per concreting platform.
Locks in place automatically.
1005

1305
100

1340 525 50

6.10

Crane Hook Concreting Platform 5,70 037440

137 60
3 per concreting platform.
Complete with: Captive Fixing Pin
and Cam Nut DW15, galv.
110
74
520

70
225

ø 19
150

Load-bearing point DW15

Permissible load: 1000kg

211
212
6.20 VARIO GT 24 Column

Page

103724 Access Ladder 180/2, galv. 217

031200 Chamfer Strip with Flange l=2.50m 215
012060 Column Main Waler SGRZ 181 214
012050 Column Vario Waler SVRZ 120 214
012080 Column Waler SSRZ U100 Spec. Length 214
012040 Column Waler SSRZ U120 Spec. Length 214
012090 Column Waler SSRZ U140 Spec. Length 214
012150 Column Waler SSRZ-24 97/ 85 214
012160 Column Waler SSRZ-24 113/101 214
027070 Corner Scaffold Bracket EGB 80, left 216
027060 Corner Scaffold Bracket EGB 80, right 216
070760 Crane Splice GT 24 216
024070 Hook Strap HB 24-100/120, galv. 215
024080 Hook Strap HB 24-140/160, galv. 215
051410 Ladder 180/6, galv. 217
051460 Ladder Base, galv. 217
104064 Ladder Connector VARIO, galv. 216
103718 Ladder Hook, galv. 217
104132 Ladder Safety Cage 75, galv. 217
051450 Ladder Safety Cage 150, galv. 217
037160 Locking Pin Ø 20x205, galv. 214
030010 Tie Rod DW 15 l=0.85m 215
024210 Tie Yoke SKZ 215
024240 Wedge KZ, galv. 215
012300 Welding Unit for SSRZ 214
030100 Wingnut DW 15, galv. 215

6.20

213
VARIO GT24 Column and Accessories
Weight kg Item no.

Column Waler SSRZ-24 97/85 40,20 012150

Profile U100
For cross section 240x240mm up
to 480x600mm.
Column Waler SSRZ-24 113/101 47,20 012160 A
Profile U100 25
555
For cross section 400x400mm up
to 640x760mm. 40 7x60=420 46
152

7
30
325 300
175

B
A B 52 52
SSRZ 24-97/85 972 852
U 100 130
SSRZ 24-113/101 1132 1012

Column Waler SSRZ U100 Spec. Length 22,00/m 012080

Column Waler SSRZ U120 Spec. Length 28,00/m 012040
Column Waler SSRZ U140 Spec. Length 33,00/m 012090
Welding for SSRZ U100 to U140 012300

Column Vario Waler SVRZ 120, U 100 31,60 012050

For cross section up to 800x1200mm
in connection with steel waler SRU
or column main waler SGRZ 181.
20
48
ø 21
31 620 300
46 74

300

375
46

U 100
52

20

56 705 300 52

40 15x60=900 162
1274

Special lengths and other

profiles upon request.
Accessories:
Locking Pin ø 20x205, galv. (2x) 0,74 037160
Wedge KZ, galv. for VARIO (1x) 0,85 024240
Steel Waler SRU, U 120 See range 2.10 VARIO GT 24!

Column Main Waler SGRZ 181, U 120* 49,00 012060

For cross section up to 800x1200mm
in connection with column
vario waler SVRZ 120.
1806

40 28x60=1680 86

25
46
11

52,5
20

55
162
653 500
U 120

*This waler is no longer in production

52
and is only available from hire stock.

214
 Weight kg Item no.

Hook Strap HB 24, galv.

For connection of GT 24 Girder to SRZ
HB 24-100/120 0,61 024070
102
For SRZ U100/U120
HB 24-140/160 0,68 024080
For SRZ U140/U160 M8x70
DIN 603

152 (U100)
20 82 20 162 (U120)
172 (U140)
Spare Bolt:
F.H. Bolt DIN 603 M8x70 MU, galv. 0,04 024140

Tie Yoke SKZ 2,30 024210

For outside corner ties at VARIO 92
Columns for SSRZ profiles U100 to U140.

35°

0°
ø 18

x7
min
ma
155

131
22
Wedge KZ
51
Accessories:
Wedge KZ (1x) 0,85 024240

Wedge KZ 0,85 024240

For connecting Main Waler with 47 20
VARIO Waler and fixing Tie Yoke SKZ. 254

Chamfer Strip with Flange L = 2,50m 0,47 031200

15
Plastic.
15
35

2,7

Tie Rod DW15, L = 0,85m 1,22 030010

Non-weldable! Observe approval conditions!
L
6.20

Permissible load to DIN 18216: 90kN

Wingnut DW15, galv. 0,44 030100

50
27

110

Permissible load to DIN 18216: 90kN

215
 Weight kg Item no.

Crane Splice 24 3,92 070760

60
Min. 2 N° per formwork unit.
Complete with:
Pin ø 16x65/86 and Cotter Pin 4/1 (1x).

110
Follow Instructions for Use.

35
59

31
≤ 15°
ø 16x65/86

648
FS 4/1

Lifting device to
BGR 500
Permissible load: 30 25
700kg, at maximum
angle of inclination 117
of 15°.

Corner Scaffold Bracket

EGB 24-80 right 13,70 027060
Corner Scaffold Bracket
EGB 24-80 left 13,70 027070

120
Complete with:
Captive Locking Pin.

Drawing shows: EGB 24-80 R

460
Permissible Load: 150kg/m2
Allowable Spacing: 1,25m

1050

1650
50

ø7
70

85
92

Ladder connector VARIO, galv. 6,26 104064

For connecting ladders to VARIO
column walings.
Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. (2x)
Clamping plate (2x), 20x205 Bolts (2x) and
Cotter pin 4/1 (2x)
50
218
230

178

SW 19

469
735

216
 Weight kg Item no.
Eyes for security chain
Ladder 180/6, galv. 13,10 051410
25 400 50 534 50
Access ladder 180/2, galv. 11,10 103724
Complete with: ø 13

95
400

20
Hex. Bolts ISO 4017 M12x40-8.8, galv. and

130
80
Hex. Nut ISO 7042 M12-8, galv. (4x)

80

1200
5 x 298 = 1490

1810
1960

1885
298
25
155

168
SW 19

220

220
130
20
20 405 40 20 405

Accessories:
Formwork chain 3kN, 2,5m 1,37 065073

Ladder hook, galv. 0,68 103718

Only for the lower ladder (2x) SW 19

Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. and
Hex. Nut ISO 7042 M12-8, galv. (2x)

120 320

Ladder Base 2,36 051460

For preventing the ladders sliding.

405 50
25 100

53
210

130
40

13

Ladder Safety Cage 75, galv. 15,50 104132

50

Ladder Safety Cage 150, galv. 25,20 051450

Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. (4x),
750 (1500)

Clamping plate (4x)

50 6.20

25 325 355
450

710

79

294

217
218
6.30 TRIO Column

Page

103724 Access Ladder 180/2, galv. 222

023500 Alignment Coupler BFD, galv. 220
054240 Chamfer Strip 15/15 l=2.70m 221
054220 Column Panel TRS 60x90 220
054210 Column Panel TRS 120x90 220
054200 Column Panel TRS 270x90 220
054230 Column Tie Bolt TRIO, galv. 220
037410 Concreting Landing 223
037400 Concreting Platform, complete 223
037440 Crane Hook Concreting Platform 223
037420 Handrail 52, galv. 223
037430 Handrail 134, galv. 223
103721 Inserting Nut TRS, complete 221
051410 Ladder 180/6, galv. 222
051460 Ladder Base, galv. 222
103362 Ladder Connector TRIO, galv. 221
103718 Ladder Hook, galv. 222
104132 Ladder Safety Cage 75, galv. 222
051450 Ladder Safety Cage 150, galv. 222
030320 Plug Ø 25mm for TRS 221
103716 TRS Clamp DW 15, galv. 221
030370 Wingnut Pivot Plate DW 15 , galv. 220

6.30

219
TRIO Column Panels and Accessories
Weight kg Item no.

Column Panel TRS, steel

red powder-coated.
Fitted with 18mm Finply formlining. 21
Complete with: Plug ø 25mm TRS

TRS 270x90 = 2,43m2 141,00 054200

TRS 120x90 = 1,08m2 61,80 054210

40
TRS 60x90 = 0,54m2 47,30 054220

75 50 50

50 50

120
900
900

350

1200
600
40
2700
80

900

600
61

350
61
600
350
Accessories:
Column Tie Bolt TRIO, galv. 0,62 054230
Wingnut Pivot Plate DW 15, galv. 1,54 030370

Column Tie Bolt TRIO, galv. 0,62 054230 283

SW 30
100
ø19

Thread DW 15

Wingnut Pivot Plate DW 15, galv. 1,54 030370

With pivoted, captive nut.
120

76
27

ø9 8° 8°
110

Permissible load to DIN 18216: 90kN

Alignment Coupler BFD, galv. 4,05 023500

For extending the Column Panel TRS.

Clamping length 25

max. 220 mm
60
164

260
52

60
64
58

51

288

Permissible Tension Force: 20kN.

220
 Weight kg Item no.

TRS Tie DW15, galv. 2,24 103716

ø19

DW15
266
342

TRS Insertion Nut, complete 0,90 103721

Complete with:

40
Pin ø 14x160, galv., item no.: 103715
Cotter Pin 4/1, item no.: 018060 (each 1x)

160
ø14

FS 4/1

74
118

Chamfer Strip 15/15 L = 2,70m 1,90 054240

For TRIO Column Formwork.
7 x 300 = 2100
300 300

150
115
170
90
30

2700 67

Plug ø 25mm TRS 0,004 030320

21
For TRIO TRS Column Panel.
Fitted flush.
ø 23
ø 25

Ladder Connector TRIO, galv. 7,34 103362

For connecting ladders to TRIO
TRS column units.
Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. (2x)
Clamping plate (2x) and cotter pin 4/1 (1x) 921
ø 20
214
50

6.30
251

469
SW 19

221
 Weight kg Item no.
Eyes for security chain
Ladder 180/6, galv. 13,10 051410
25 400 50 534 50
Access Ladder 180/2, galv. 11,10 103724
Complete with: ø 13

95
400

20
Hex. Bolts ISO 4017 M12x40-8.8, galv. and

130
80
Hex. Nut ISO 7042 M12-8, galv. (4x)

80

1200
5 x 298 = 1490

1810
1960

1885
298
25
155

168
SW 19

220

220
130
20
20 405 40 20 405

Accessories:
Anchor chain 3kN, 2,5m 1,37 065073

Ladder Hook, galv. 0,68 103718

Only for the lower ladder (2x) SW 19
Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. and
Hex. Nut ISO 7042 M12-8, galv. (2x)

320
120

Ladder Base 2,36 051460

For preventing the ladders sliding.

405 50
25 100

53
210

130
40

13

Ladder Safety Cage 150, galv. 25,20 051450

50

Ladder Safety Cage 75, galv. 15,50 104132

Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. (4x),
750 (1500)

Clamping plate (4x)

50

25 325 355
450

710

79

294

222
 Weight kg Item no.

Concreting Platform, complete 126,00 037400

Used for TRIO, RAPID and QUATTRO columns.
Consisting of:
Concreting Landing (1x)
Handrail 52 galv. (2x)
Handrail 134 galv. (2x)
Crane Hook Concreting Platform (3x)

Concreting Landing, Alu 51,50 037410 1524

Powder-coated 1420
Suitable for any cross section up to a
1340
maximum of 600x600mm. It is mounted
525
with the Crane Hook Concreting Platform. 130
40

40
525
710
500

1524
ø 20

ø 14

adjustable
840 620
Permissible Load: 150kg/m2

Handrail 52, galv. 10,50 037420

Handrail 134, galv. 18,10 037430 Connector for safty chain
ø 38
2 of each per concreting platform.
Locks in place automatically.
1005

1305
100

1340 525 50

Crane Hook Concreting Platform 5,70 037440

137 60
3 per concreting platform.
Complete with: Captive Fixing Pin
and Cam Nut DW15, galv.
110

6.30
74
520

70
225

ø 19
150

Load-bearing point DW15

Permissible load: 1000kg

223
224
6.40 QUATTRO Column

Page

103724 Access Ladder 180/2, galv. 228

037550 Bottom Slide Bar QUATTRO QB 227
037530 Brace Connector QUATTRO QR 227
037590 Chamfer Strip QDL 50 227
037600 Chamfer Strip QDL 125 227
037610 Chamfer Strip QDL 275 227
105448 Chamfer Strip QDL 350 227
037410 Concreting Landing 229
037400 Concreting Platform, complete 229
037540 Corner Tie Unit QUATTRO QA 227
018060 Cotter Pin 4/1, galv. 226
037440 Crane Hook Concreting Platform 229
037420 Handrail 52, galv. 229
037430 Handrail 134, galv. 229
051410 Ladder 180/6, galv. 228
051460 Ladder Base, galv. 228
103391 Ladder Connector QUATTRO, galv. 227
103718 Ladder Hook, galv. 228
104132 Ladder Safety Cage 75, galv. 228
051450 Ladder Safety Cage 150, galv. 228
037520 Panel QUATTRO QE 50 226
037510 Panel QUATTRO QE 125 226
037500 Panel QUATTRO QE 275 226
104674 Panel QUATTRO QE 350 226
724500 Pin Ø 20x 42, galv. 227
105400 Pin Ø 20x140, galv. 226
105791 Transportation Wheel QUATTRO 230

6.40

225
QUATTRO Column frames and Accessories
Weight kg Item no.

QUATTRO Column Frames Corner detail

Steel, powder coated.
For column cross sections from 200x200
to 600x600mm in 50mm increments.

Finply 21mm formlining, screwed from

behind. Eye bolts provided act as crane
lifting or frame extension points. Pin ø 20 x 140

Complete with:
Eye bolt M20x120, Item no. 724812,
Nut M20, Item no. 710045 (2x),
Pin ø 20x140, galv. Item no. 724501 and
Cotter pin 4/1, galv. Item no. 018060.

The QE 350 and the QE 275 frames

include the QUATTRO base plate QB, QUATTRO chamfer strip
Item no. 037550.
Stacking height
Frame without chamfer strip

121
691

121
QE 350 Frame 201,00 104674

484

121
QE 275 Frame 152,00 037500

121
QE 125 Frame 71,80 037510
QE 50 Frame 31,50 037520 844

Load-bearing point
Permissible load: 1000kg

Pin ø 20x140 (1x)

2750

for striking position

3500

Pin ø 20x140 (1x)

for striking position

725

725

Pin ø 20x140 (1x)

for striking position
1250

500

725 725

226
 Weight kg Item no.

Frame Spanner QUATTRO QA 2,42 037540

For pulling QUATTRO column
frames tight. Only required
at one corner of column.

45
Number required:
Column height 350mm - 6pcs.
Column height 275mm - 4pcs. ø 21 DW15
Column height 125mm - 2pcs.
Column height 50mm - 1pcs. 251

89

57
195

Brace Connector QUATTRO QR 1,16 037530

For connecting push-pull props
and kickers to QUATTRO panels.
Complete with:
Pin ø 16x42 and cotter pin 4/1 (1x).

155
93

Detail mounted to
Base Plate QUATTRO QB 3,30 037550 the frame
Protects formlining against damage.
Complete with:

100
Profiled nut, Item no. 030130 (2x).

3°
80

530
DW 15

725

Plastic Chamfer Strip with Lip L [m] 15

Plastic.
Special length for QUATTRO column frames:
15

QDL 350 0,67 105448 3,50

20

QDL 275 0,52 037610 2,75

QDL 125 0,23 037600 1,25 2,7
QDL 50 0,10 037590 0,50

Ladder connector QUATTRO, galv. 4,89 103391

For connecting ladders to QUATTRO
50

column frames.
160

Complete with:
Hex. Bolts ISO 4017 M12x25-8.8, galv. (2x)
and Clamping plate (2x)
178
230

SW 19
6.40
469

750

227
 Weight kg Item no.
Eyes for security chain
Ladder 180/6, galv. 13,10 051410
25 400 50 534 50
Access Ladder 180/2, galv. 11,10 103724
Complete with: ø 13

95
400

20
Hex. Bolts ISO 4017 M12x40-8.8, galv and

130
80
Hex. Nut ISO 7042 M12-8, galv. (4x)

80

1200
5 x 298 = 1490

1810
1960

1885
298
25
155

168
SW 19

220

220
130
20
20 405 40 20 405

Accessories:
Formwork Chain 3kN, 2,5m 1,37 065073

Ladder Hook, galv. 0,68 103718

Only for the lower ladder (2x) SW 19
Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. and
Hex. Nut ISO 7042 M12-8, galv. (2x).

320
120

Ladder Base 2,36 051460

To prevent the ladders sliding.

405 50
25 100

53
210

130
40

13

Ladder Safety Cage 75, galv. 15,50 104132

50

Ladder Safety Cage 150, galv. 25,20 051450

Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. (4x),
750 (1500)

Clamping plate (4x)

50

25 325 355
450

710

79

294

228
 Weight kg Item no.

Concreting Platform, complete 136,00 037400

Used for TRIO, RAPID and QUATTRO columns.
Consisting of:
Concreting Landing (1x)
Handrail 52 galv. (2x)
Handrail 134 galv. (2x)
Crane Hook Concreting Platform (3x)

Concreting Landing, Alu 51,50 037410 1524

Powder-coated 1420
Suitable for any cross section up to a
1340
maximum of 600x600mm. It is mounted
525
with the Crane Hook Concreting Platform. 130
40

40
525
710
500

1524
ø 20

ø 14

adjustable
840 620
Permissible Load: 150kg/m2

Handrail 52, galv. 10,50 037420

Eyes for security chain
Handrail 134, galv. 18,10 037430 ø 38
2 of each per concreting platform.
Locks in place automatically.
1005

1305
100

1340 525 50

Crane Hook Concreting Platform 5,70 037440

137 60
3 per concreting platform.
Complete with: Captive Fixing Pin
and Cam Nut DW15, galv.
110
74
520

70 6.40
225

ø 19
150

Load-bearing point DW15

Permissible load: 1000kg

229
 Weight kg Item no.

Transportation Wheel QUATTRO 17,20 105791 388 135

To move QUATTRO Columns.
4 pcs. per column needed.
Permissible load: 500kg

592
ø inside 28
ø outside 38

operate with Scaffold Tube ø 48,3 x 3.2 mm

or Tie Rod DW15 - DW20

20

230
 6.40

231
232
6.50 SRS Steel Circular Column

Page

103724 Access Ladder 180/2, galv. 238

045200 Adapter Strip SRS-TRIO l=3.00m 236
045211 Circular Column Landing 25-70 236
102176 Circular Column Landing 75-120 237
Circular Column Panels 234
045210 Circular Column Platform 25-70, complete 236
102177 Circular Column Platform 75-120, complete 237
103417 Exit Handrail Post SRS 134, galv. 239
037430 Handrail 134, galv. 236
102178 Handrail 184, galv. 237
051410 Ladder 180/6, galv. 238
051460 Ladder Base, galv. 238
103374 Ladder Connector SRS, galv. 239
104196 Ladder Holder SRS, galv. 239
103718 Ladder Hook, galv. 238
104132 Ladder Safety Cage 75, galv. 238
051450 Ladder Safety Cage 150, galv. 238

6.50

233
SRS Steel Circular Column and Accessories

Steel Circular Column Formwork

Complete with:
Captive Column Bolt and Eye Bolt for
crane handling and for extending.
Item no. and weight are specified for
each column element (half form).

h d 25 cm 30 cm 35 cm 40 cm 45 cm 50 cm 55 cm 60 cm 65 cm 70 cm
045013 045023 045033 045043 045053 045063 045073 045083 045093 045103 Item no.
3,00 m
116,00 131,00 139,00 149,00 163,00 171,00 187,00 193,00 205,00 217,00 Weight kg
045012 045022 045032 045042 045052 045062 045072 045082 045092 045102 Item no.
2,40 m
99,30 112,00 119,00 126,00 137,00 144,00 157,00 162,00 171,00 181,00 Weight kg
045011 045021 045031 045041 045051 045061 045071 045081 045091 045101 Item no.
1,20 m
61,50 69,40 72,60 77,00 83,70 87,50 95,50 97,50 103,00 109,00 Weight kg
045010 045020 045030 045040 045050 045060 045070 045080 045090 045100 Item no.
0,30 m
21,70 25,70 26,60 28,30 31,60 32,90 37,00 37,00 39,50 42,30 Weight kg
B 62,0 67,0 72,0 77,0 82,0 87,0 92,0 97,0 102,0 107,0 cm
H 49,0 54,0 59,0 64,0 69,0 74,0 79,0 84,0 89,0 94,0 cm
x 29 31 34 36 39 41 44 46 49 52 cm
y 20 21 21 23 25 24 30 28 31 27 cm

h d 75 cm 80 cm 85 cm 90 cm 95 cm 100 cm 105 cm 110 cm 115 cm 120 cm

045107 045111 045115 045119 045123 045127 045131 045135 045139 045143 Item no.
3,00 m
241,00 254,00 265,00 278,00 287,00 301,00 309,00 311,00 342,00 353,00 Weight kg
045106 045110 045114 045118 045122 045126 045130 045134 045138 045142 Item no.
2,40 m
200,00 210,00 220,00 230,00 237,00 249,00 256,00 271,00 282,00 292,00 Weight kg
045105 045109 045113 045117 045121 045125 045129 045133 045137 045141 Item no.
1,20 m
114,00 120,00 125,00 131,00 134,00 141,00 144,00 152,00 159,00 164,00 Weight kg
045104 045108 045112 045116 045120 045124 045128 045132 045136 045140 Item no.
0,30 m
44,90 47,10 49,50 52,10 53,20 56,20 57,30 61,60 64,50 66,90 Weight kg
B 112 117 122 127 132 137 142 147 152 157 cm
H 101,0 106 111 116 121 126 131 136 141 146 cm
x 54 57 59 62 64 67 69 72 74 77 cm
y 28 29 31 32 33 33 35 37 37 38 cm

Special sizes ø = 75 to 120cm are not rentable.

Plan view Stacking height

d
y
H

y
x

Load-bearing point
Permissible load: 1000kg

234
 d
h = 300

d
h = 1200

d
h = 2400

d
h = 3000

235
6.50
 Weight kg Item no.

Circular Column Platform, complete 144,00 045210

Adjustable to suit any column diameter from
ø 250mm to ø 700mm in 50mm increments.
Consisting of:
Circular Column Landing (1x)
Handrail 134 (4x)

Circular Column Landing 70,80 045211 1554 130

Alu, powder-coated.
Adjustable to suit any column diameter from
ø 250mm to ø 700mm in 50mm increments.

1472
198
Permissible Load = 150kg/m2

Handrail 134, galv. 18,10 037430 Eyes for security chain 38

4 per Column Platform 25/70 required
2 per Column Platform 75/120 required
Locks in place automatically.
1005

1305
100

300

50
1340

Adapter Strip 4,05 045200

Circular Column-TRIO L = 3,0m
For connecting SRS Circular
Column to TRIO.
3000 18
Alu, powder-coated.
40
60

110
22

11
28 x 100 = 2800

Accessories:
Plug ø 20/24mm 0,003 030300

236
 Weight kg Item no.

Circular Column Platform 75/120 159,00 102177

Adjustable to suit any column diameter from
ø 750mm to ø 1200mm in 50mm increments.
Consisting of:
Circular Column Landing 75/120 (1x)
Handrail 134, galv. (2x)
Handrail 184, galv. (2x)

Circular Column Landing 75/120 77,80 102176

Alu, powder-coated.
Adjustable to suit any column diameter from
ø 750mm to ø 1200mm in 50mm increments.

2054 130
1472

215

Permissible Load = 150kg/m2

Handrail 184, galv. 22,60 102178

2 per Column Platform 75/120 required
Locks in place automatically.

38
1005

1305
100

300

1840 50
6.50

237
 Weight kg Item no.
Eyes for security chain
Ladder 180/6, galv. 13,10 051410
25 400 50 534 50
Access ladder 180/2, galv. 11,10 103724
Complete with: ø 13

95
400

20
Hex. Bolts ISO 4017 M12x40-8.8, galv. and

130
80
Hex. Nut ISO 7042 M12-8, galv. (4x)

80

1200
5 x 298 = 1490

1810
1960

1885
298
25
155

168
SW 19

220

220
130
20
20 405 40 20 405

Accessories:
Formwork chain 3kN, 2,5m 1,37 065073

Ladder hook, galv. 0,68 103718

Only for the lower ladder (2x) SW 19
Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. and
Hex. Nut ISO 7042 M12-8, galv. (2x).

120 320

Ladder Base 2,36 051460

For preventing the ladders sliding.

405 50
25 100

53
210

130
40

13

Ladder Safety Cage 75, galv. 15,50 104132

50

Ladder Safety Cage 150, galv. 25,20 051450

Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. (4x),
750 (1500)

Clamping plate (4x)

50

25 325 355
450

710

79

294

238
 Weight kg Item no.

Ladder connector SRS, galv. 9,86 103374

50
For connecting ladders to SRS
circular column units up to ø 700mm
Complete with:
Hex. Bolts ISO 4017 M12x25-8.8, galv. (2x)
Clamping plate (2x), ø 16x42 Bolt, galv. (1x)
and cotter pin 4/1 (1x)

992

450
140
SW 19
469

Ladder holder SRS, galv. 0,70 104196

For fixing access ladders to the
SRS access handrail.
2 for each ladder.
Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. (1x) and
Clamping plate (1x)

48
40

8
M12x25 22
152

Access handrail SRS 134, galv. 14,90 103417 38

For circular column landings 25-70
1 for each access
1005

1305
100

300

50
1340

6.50

239
240
07.10
-
23.10
7 Bridges 7.10 Civil Engineering 241 - 248

and Tunnels
7.20 Heavy Duty Prop HD 200 249 - 258

7.30 Cantilevered Parapet Carriage GKW 259 - 268

7.40 Cantilevered Parapet Platform GKB 269 - 278

8 Panel Slab 8.10 SKYDECK 279 - 292

Formwork
9 Girder Slab 9.10 MULTIFLEX 293 - 300

Formwork
9.20 Tableform, UNIPORTAL 301 - 312

9.30 UZ Beam Formwork, AW Stopend 313 - 316

10 Shoring Systems 10.10 PD 8 Table System 10.20 PD 8 Shoring Tower 317 - 330
10.30 PD 8 Stair Tower

11 Support Frames 11.10 ST 100 Stacking Tower 331 - 336

12 Props, 12.10 MULTIPROP 12.30 PEP 10, PEP 20, PEP 30 337 - 352
Push-Pull-Props 12.40 RS and RSS Push-Pull-Prop

13 Brace Frame 13.10 SB Brace Frame 353 - 368

14 Tie Rod 14.10 DW 15, B 15 14.20 DW 20, B 20, DW 26 369 - 386

14.30 DK, SK, KK

15 Assembly Tools 15.10 Formwork Tools 15.20 Accessories 387 - 404

and Accessories 15.30 Screws, Nails, Pins

16 Site Equipment 16.10 Paletts, Stopend Systems 405 - 418

16.20 ASP Box-Out Formwork

18 Plywood 18.10 Plywood 419 - 424

19 Services 19.10 - 19.30 TRIO-, SKYDECK-, DOMINO Service 425 - 432

19.90 Technical Planning

20 PERI UP 20.30 Shoring 433 - 440

20.40 Scaffold Units 441 - 446

23.10 Stairs PERI UP, PERI Public 447 - 455

Alphabetical and numerical index 456 - 486
 7.10
7.10 Civil Construction

Page

010350 Additional Row of SRZ Slots 243

104027 Attachment VARIO 24 U120 244
108688 BPA Ø 125 Adapter TRIO 246
108504 Clear Slide BPA Ø 125 246
024000 Compensation Washer 16, galv. 243
024180 Compensation Washer 20, galv. 243
108493 Concrete Pump Connector BPA Ø 125 246
018060 Cotter Pin 4/1, galv. 242
108543 Coupling BPA Ø 125 246
710001 End Plate SRZ 243
104031 Filler Pin Ø 21x120 242
104131 Handrail Holder SRU/SRZ 245
061260 Handrail Post SGP 245
022040 Heavy Duty Roller 150kN / Type B-II 247
022041 Heavy Duty Roller 200kN / Type A-II 247
022042 Heavy Duty Roller 300kN / Type B-III 247
022043 Heavy Duty Roller 300kN / Type N-III 247
022044 Heavy Duty Roller 400kN / Type A-III 247
101773 Heavy Duty Spindle SLS 80/140 243
101774 Heavy Duty Spindle SLS 100/180 243
101776 Heavy Duty Spindle SLS 140/240 243
101778 Heavy Duty Spindle SLS 200/300 243
101779 Heavy Duty Spindle SLS 260/360 243
710219 Hex. Bolt ISO 4014 M16x100-8.8, galv. 243
024910 Hex. Bolt ISO 4014 M20x100-8.8, galv 243
710229 Hex. Nut ISO 4032 M16-8, galv. 243
710334 Hex. Nut ISO 4032 M20-8, galv. 243
072180 Ratchet Wrench 1/2 " 246
102784 Socket SW 24-1/2" 246
010080 Steel Waler SRZ U100, Spec. Length 243
010150 Steel Waler SRZ U120, Spec. Length 243
010090 Steel Waler SRZ U140, Spec. Length 243
103868 Steel Waler Universal SRU U120 l=0.72m 244
103871 Steel Waler Universal SRU U120 l=0.97m 244
103874 Steel Waler Universal SRU U120 l=1.22m 244
103877 Steel Waler Universal SRU U120 l=1.47m 244
103886 Steel Waler Universal SRU U120 l=1.72m 244
103889 Steel Waler Universal SRU U120 l=1.97m 244
103898 Steel Waler Universal SRU U120 l=2.22m 244
103892 Steel Waler Universal SRU U120 l=2.47m 244
103929 Steel Waler Universal SRU U120 l=2.72m 244
103903 Steel Waler Universal SRU U120 l=2.97m 244
103906 Steel Waler Universal SRU U120 l=3.47m 244
103915 Steel Waler Universal SRU U120 l=3.97m 244
103918 Steel Waler Universal SRU U120 l=4.47m 244
103922 Steel Waler Universal SRU U120 l=4.97m 244
103925 Steel Waler Universal SRU U120 l=5.47m 244
103928 Steel Waler Universal SRU U120 l=5.97m 244
103943 Steel Waler Universal SRU U140 l=4.97m 244
022030 Tie Rod Cylinder Yoke SW, galv. 242
024470 TSS-Torx 6x60, galv. 246
103737 Universal Coupling UK 70 242
022002 Waler Hinge adjustable, galv. 242
022001 Waler Hinge, galv. 242

241
Civil-Construction
Weight kg Item no.

Universal Coupling UK 70 10,80 103737

For bending-resistant connection of the
SRU Universal Steel Waling and 685
Connecting SLS heavy-duty spindles.
62,5 187,5 125 187,5 62,5 46

47,5
210

47,5
40
ø 21 51
21 mm diam. Connection for ø 50 for use of
SLS heavy-duty spindle tie rod cylinder yoke, galv.

30

Accessories:
Fitting Bolt ø 21x120mm 0,46 104031

Fitting Bolt ø 21x120mm 0,46 104031

207

125
20

21

23
Accessories: FS 4/1
Cotter Pin 4/1 0,03 018060

615
Waler Hinge, galv. 17,90 022001
35 180 180 180 40 50
As an articulated joint for Steel Walers.
ø 21
269

ø 21 68
ø 21

831
Waler Hinge adjustable, galv. 18,60 022002
800
As an articulated joint for Steel Walers.
With built-in adjustment. max 310 300 max 140
min 205 105 min 245 50
100
275

ø 21
SW24

ø 21 ø 80

Tie Rod Cylinder Yoke SW, galv. 2,10 022030

150
For use with universal coupling UK 70,
waler hinge or waler hinge adjustable.
ø 50

ø 20

242
 7.10

Weight kg Item no.

Heavy Duty Spindle SLS

For transferring loads, particularly
in bridge-building.
Typ L min. L max. A
SLS 80/140 12,60 101773 SLS 80/140 800 1400 746
SLS 100/180 17,90 101774 SLS 100/180 1000 1800 946
SLS 140/240 24,40 101776 SLS 140/240 1400 2400 1346
SLS 200/300 31,80 101778 SLS 200/300 2000 3000 1946
SLS 260/360 37,90 101779 SLS 260/360 2600 3600 2546

Detail SRU Detail SRZ

Fitting Bolt ø 21x120 Hex. Nut ISO 4032

Item no. 104031 M20-8, galv., Hex. Bolt ISO 4014
Item no. 710334 M20x100-8.8, galv.
Item no. 024910

2 x spacing washers 20, galv.

Cotter pin 4/1, Item no. 024180
Item no. 018060

L min. - L max.
ø 20 A

ø 89
ø 48

Compensation Washer 16, galv. 0,17 024000 12,5

Compensation Washer 20, galv. 0,17 024180 58
6
When using hex. bolts M16 or M20 at
the VARIO elongated hole.
46

ø 16,5 / ø 20,5

Hex. Bolt ISO 4014 M16x100-8.8, galv. 0,18 710219

Hex. Bolt ISO 4014 M20x100-8.8, galv. 0,30 024910

Hex. Nut ISO 4032 M16-8, galv. 0,03 710229

Hex. Nut ISO 4032 M20-8, galv. 0,06 710334

60 52 60
Steel Waler SRZ Special Length SRZ U100 22,00/m 010080 50 52 50
55 52 55
SRZ U120 28,00/m 010150
SRZ U140 33,00/m 010090
140
120
100

Maximum length: 12,0m

U100 U120 U140
Wy =82,4cm3 Wy =121,4cm3 Wy =172,8cm3
Additional row of SRZ slots 010350 Iy =412cm4 Iy =728cm4 Iy =1210cm4

End Plate SRZ 0,35 710001

For special steel waler. ø6 58 58 5
ø9
39 13
60

14
6

51,6

243
 Weight kg Item no.

Universal Steel Waler SRU SRU 72 18,20 103868 51 7 x 60 = 420

55 52 55
U120 profile U140 profile SRU 97 24,40 103871 60
46
Wy =121,4cm3 Wy =172,8cm3 SRU 122 31,00 103874 ø 21

37 53
Iy =728cm4 Iy =1210cm4 SRU 147 37,60 103877

120
SRU 172 44,40 103886
SRU 197 51,00 103889 48 125 n x 125
SRU 222 57,60 103898 60 52 60
SRU 247 64,40 103892
SRU 272 71,00 103929

140
SRU 297 77,60 103903
SRU 347 91,00 103906 21 100
SRU 397 104,00 103915 7 17
SRU 447 117,00 103918
SRU 497 131,00 103922

19
112
SRU 547 144,00 103925
SRU 597 157,00 103928
36 70 x
SRU 497 158,00 103943
U140* 198,5 65 65 65

597

70
535
547

70

70
535
497 497*

700
70

70
70
535

535
447

70
616
70

70

70
821
535

70
397

654

654
70

519
70

70
535

347 70

70
70
654
70

519
532
70

654
558
535

297
70

70

5972
585

70
70

70

272

70
5472
70

599

639
70

70
535

247

4972
4972

654
898
636

872
70
70

525
535

222
70
70

4472
70

535

70
197
70

70
70

3972

70

70
680

933

821
70

535

172
654
3472
70 323 70

638
615

645

532

519
70

535

147
70

2972
70

70
2722

70

70

70
70

70
561

70
70

122
70
70

2472
2222
410 70

800
800

97
595

700
657

654

654

654
636

616
615
1972

585
550
70

1722
70

72
1472
70

70

70

70

70

70

70

70

70

70

70

70

70
70

1222
70

879
972
760

530

595

535

535

535

535

535

535

535

535

535

535

535

535
510

722
70

70

70

70

70

70

70

70

70

70

70

70

70

70

70

70

70

VARIO Extension 24 U120 7,33 104027 52 52 60 M16

Complete with:
53
120

Hex. Bolts ISO 4017 M16x50-8.8, galv.

Item no. 710252, washer 18, DIN 434, galv. 162 46
Item no. 710880 and Hex. Nut ISO 7040
M16-8, galv., Item no. 104024 (4 each)
236

244
 7.10

Weight kg Item no.

Handrail Holder SRU/SRZ 4,38 104131 45

Fits SRU and SRZ U 100, U 120, U 140
steel walings.
For fixing the SGP handrail post to slab
edges, e.g. on bridge formwork or

308
slab tables.
Complete with:
Bolts ø 20x140, galv. (2x)

80
Cotter pin 4/1, galv. (2x)
140
495

Detail SRZ

Accessories: Detail SRU

Handrail Post SGP 5,82 061260

Handrail Post SGP 5,82 061260

Powder-coated.

35 65
120

ø5
425
1416

425
1750

44

ø 10 112
15

245
 Weight kg Item no.

Concrete Pump Connector BPA ø 125 22,40 108493

For connecting concrete feed pipes
with ø 125mm, 5,5” to PERI system ø9
formwork. ø 22

ø 121,8
ø 133

380
340

M12x60

Accessories for girder formwork :

TSS Torx 6x60, galv. (12x) 0,008 024470 406
Accessories for panel formwork:
BPA ø 125 Adaptor TRIO (2x) 1,81 108688

Coupling BPA ø 125 4,90 108543

Suitable for all common concrete feed pipes
with ø 125mm or 5,5”.

235 52
257

144

Clear Slide BPA ø 125 6,44 108504

For removing residual concrete from the
concrete pump connector BPA ø 125.

ø 148 595
SW24

SW41
ø 120

Accessories:
Ratchet Wrench 1/2” 0,56 072180
Socket SW24-1/2” 0,095 102784

BPA ø 125 Adaptor TRIO 1,81 108688

For attaching the concrete pump connector
BPA ø 125 to TRIO panels.
110 400
78
40

100 SW30
DW15

246
 7.10

Weight kg Item no.

Heavy Duty Roller 150kN / Type B-II 8,40 022040

Moving device for special and heavy-duty
220 190
construction.
180 155
14

14
73
20

10
123 12 60
113

Heavy Duty Roller 200kN / Type A-II 11,70 022041

Moving device for special and heavy-duty 220 190
construction. 150 155

14

14
87
20

10
123 12 60
113

Heavy Duty Roller 300kN / Type B-III 14,10 022042

Moving device for special and heavy-duty
construction.
270 210

220 175

18

14

90
30
10

15 68
153
130

Heavy Duty Roller 300kN / Type N-III 13,00 022043

Moving device for special and heavy-duty 270
construction.
217 130
For welding to construction.
6
25
92

30
10

153 15 68

Heavy Duty Roller 400kN / Type A-III 19,30 022044

Moving device for special and heavy-duty
construction. 270 210

190 175
18
14

104

30
10

15 68
153 130

247
248
7.20 Heavy Duty Prop HD 200
7.20
Page

103724 Access Ladder 180/2, galv. 257

022019 Base Adapter HD 253
022024 Base Plate HD 255
022016 Brace Connector HDR 255
022025 Centering Bar 40x20x400mm 251
022013 Centering Bolt HD M12, galv. 253
022022 Compression Prop Head HD 255
022023 Compression Prop Spindle HD 255
028080 Connector Kicker/Push-Pull Prop, galv. 253
022020 Coupling Section HD30 250
017020 Double Coupler NK 48/48, galv. 255
022011 Double Tie Yoke HDD 251
034580 Handrail Post HSGP 256
022007 Head Spindle HDK 45 252
101916 Height Compensation HD, h=200mm 254
051410 Ladder 180/6, galv. 257
051460 Ladder Base, galv. 257
104646 Ladder Connector HD 200 256
103718 Ladder Hook, galv. 257
104132 Ladder Safety Cage 75, galv. 257
051450 Ladder Safety Cage 150, galv. 257
022003 Lowering Device HDA 252
022014 Main Beam Clamp HD 40mm, galv. 254
106183 Main Beam Clamp HD 70mm, galv. 254
022010 Main Beam HDT 280 251
022009 Main Beam HDT 440 251
022008 Main Beam HDT 880 251
022006 Prop Section HDS 30 250
022005 Prop Section HDS 90 250
022004 Prop Section HDS 270 250
103993 Prop Section HDSS 210 250
022017 Scaffold Bracket HD 75 256
022018 Shear Pin HDA 252
022026 Steel Beam Clamp IPB 300-1000 254
017010 Swivel Coupler DK 48/48, galv. 255
022021 Trolley HD 254
024590 Wedge Lowering Device 420 kN 253
022027 Wing Nut Spanner HD 252

German Approval Certificate for HD 200,

D No. S/N 950184.

249
HD 200 Heavy Duty Prop
Weight kg Item no.

Prop Section HDS/HDSS

Powder-coated.
Complete with:
Chord coupling for connection to
other sections, Lowering Device HDA,
Coupling Section HD 30,
and Base Adapter HD.

Alu, white HDS 270 29,50 022004

Alu, white HDS 90 11,30 022005
Alu, white HDS 30 5,31 022006
Steel, red HDSS 210 64,00 103993
251

ø 48
281
22
5

2700
2741

2141
2100
900
941

300
341

Coupling Section HD 30 3,26 022020 251

Alu, white powder-coated.
Chord couplings on both faces
enable Head Spindle HDK to be
used at both ends of the HD 200.
281

22
5
290

250
 Weight kg Item no.
7.20
Main Beam HDT
300
Profile HEB 300
Complete with:
Pin ø 50x330, Cotter Pin 8 and

300
sleeve 10x80 (1x) for connecting
Main Beam HDT. ø 50x330, cotter pin 8,
Sleeve 10x80
HDT 880 1072,00 022008
HDT 440 556,00 022009
HDT 280 363,00 022010
2980

250 1150 1295

200 6x400 = 2400

120
ø 25

4580

250 950 2000 1095

200 10x400 = 4000

120
ø 25

100
8980

250 950 3200 3200 1095 100 105

200 21x400 = 8400 195

120

ø 25

Centering Bar HD 40x20x400 2,00 022025

For centering secondary beams
on the primary beam HDT.
20
40

400

Double Tie Yoke HDD 13,20 022011

For diagonal bracing with tie rod
DW15 or DW20 in the Main Beam HDT.

600

500

161
ø 60

ø 25

Permiss. Tension Load: 2x50kN

251
 Weight kg Item no.

Head Spindle HDK 45 25,70 022007

3°
3°
Adjustable by 450mm.
Allows tilting in one direction by 3°.
Complete with:

max 860
min 410
Chord coupling for connecting
to the Prop Sections HDS or

269
Coupling Section HD 30.

666
Centering bolt M12 Centering bolt M12
depends by use on the depends not by use on the
right position of the right position of the primary
primary beam HDT beam HDT

180

50
360

330
120
50
Note:
When used on both ends of an
HD prop loads greater than 60kN 220
prevent release of the collar. 284
Accessorie:
Wing Nut Spanner HD 4,23 022027

Wing Nut Spanner HD 4,23 022027

For easy release of the adjustable wing nut.

985
135

ø 48

Lowering Device HDA 31,50 022003

Adjustable by 100mm.
Only use fully extended.
120

To be connected to the Prop Sections

by the chord couplings.
Angle of inclination max. 3°
max. 344
min. 242

SW 19
300

Attention:
Never use an impact wrench for release!
Doing so it may break the Shear Pin HDA.
250
Spare Part:
Shear Pin HDA 0,002 022018

252
 Weight kg Item no.
7.20
Base Adapter HD 18,60 022019
For use with prop section HDS in conjunction
with wedge lowering device 420kN,
M24
Item no.: 024590. ø 26
Complete with:

295
Removable centering bolt.

120
50

50 80
30
160
SW 24 200
325

Centering Bolt HD M12, galv. 0,14 022013

Complete with:
Hex. Nut ISO 4032 M12-8, galv.
SW 19

80
35
M12

Width across flats 19.

Wedge Lowering Device 420kN 32,00 024590

For use with base adapter HD.

75
SW 46
Allows release or lowering of high loads.

max 268
Bearing capacity: 420kN

min 168
Adjusting range: 168-268mm

200

230
50

ø 32
260
160

Width across flats 46.

Connector Kicker / Push-Pull Prop, 2,99 028080

For connection of kicker brace AV
and push-pull props.
Complete with:
Pin ø 16x42, galv. and Cotter Pin 4/1 (1x). ø 16x42 ø 25
FS 4/1
100

14
67

12

40
➁ ➀
120 50 35

205

Perm. tension force 14,9kN under 30°

Perm. compression force 31,6kN under 30°

Connection to Main Beam:

Either hole ➀ or ➁ may be used.
Fixing with Expansion Bolt: 30°
Only hole ➁ may be used.

Accessories for Connection to Main Beam:

Main Beam Clamp HD 70mm, galv. (2x) 2,20 106183

253
 Weight kg Item no.

Height Compensation HD, h = 200mm 23,00 101916 200

For height adjustment of 200mm.

200
ø 25

220
300
Accessories:
Beam Clamp HD, 40mm, galv. 1,24 022014
Hex. Bolt ISO 4014 M24x70-10.9 0,33 026430 120
Hex. Nut ISO 4032 M24-8, galv. 0,10 022250 300

Main Beam Clamp HD 40mm, galv.* 1,24 022014

max. 40
Main Beam Clamp HD 70mm, galv. 2,20 106183

35
For connecting primary- and secondary
beams running crosswise.
54

54

* for hire only

16-70

37

50
Comply with conditions of approval!

Trolley HD 200 31,90 022021

To move secondary beams
on the Main Beams HDT.
Load capacity: 2500kg.

410
320
655

810
152

1121
80

1040
1474

Flange Clamp IPB 300-1000 1,74 022026 150 86

ø 25
To prevent tilting taking place.
22 70

130

70

254
 Weight kg Item no.
7.20
for ø 48
Brace Connector HDR 1,28 022016
Complete with:
Pin ø 16x42, galv. and Cotter Pin 4/1 (1x).

160
75
35
ø 16x42
14 FS 4/1 60

Standard Coupling 48/48mm, galv. 1,12 017020

Swivel Coupling 48/48mm, galv. 1,22 017010

Width across flats 19

Spare parts:
Hammer Head Bolt M14x98/110 0,10 710290
Collar Nut M14 requiring 19mm Spanner 0,03 710340

ø 36
Prop Head HD 21,00 022022
For using prop sections HDS as props
(also inclined).

225
110

325

125
295

Compression Brace Spindle HD 22,20 022023

For using prop sections HDS as props
(also inclined).
Only in connection with Base Plate HD!

870
max. 990
min. 523

295
264

Base Plate HD 13,20 022024

For using prop sections HDS as props
(also inclined). 100 100
Including ø 35x160 galvanised pins ø 22
and cotter pins 7. ø 36
175
65
120

40
55

300
ø 32 ø 26 ø 52 400

255
 Weight kg Item no.

Scaffold Bracket HD 75 5,05 022017 855

For access platform.
With nailing strip.
Permissible Load: 150kg/m2
Max. Spacing: 1.25m.

370
285
43

112
754

Accessories:
Handrail Post HSGP 3,50 034580

Handrail Post HSGP 3,54 034580

65
120

35
560

1050

1300

39

Ladder Connector HD 200, galv. 4,27 104646

714
626
230

178

468

256
 Weight kg Item no.
7.20
Ladder 180/6, galv. 7,15 051410
Eyes for security chain
Access Ladder 180/2, galv. 11,10 103724
25 400 50 534 50
Complete with:
Hex. Bolts ISO 4017 M12x40-8.8, galv. ø 13

95
400

20
and Hex. Nut ISO 7042 M12-8, galv. (4x)

130
80
80

1200
5 x 298 = 1490

1810
1960

1885
298
25
155

168
SW 19

220

220
130
20
20 405 40 20 405

Ladder Hook, galv. 0,68 103718

Only for the lower ladder (2x) SW 19
Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. and
Hex. Nut ISO 7042 M12-8, galv. (2x)

120 320

Ladder Base 2,36 051460

For preventing the ladders sliding.

405 50
25 100

53
210

130
40

13

Ladder Safety Cage 75, galv. 15,50 104132

50

Ladder Safety Cage 150, galv. 25,20 051450

Complete with:
Hex. Bolt ISO 4017 M12x25-8.8, galv. (4x),
750 (1500)

Clamping plate (4x)

50

25 325 355
450

710

79

294

257
258
7.30 Cantilevered Parapet Carriage GKW

Page

056029 GKW Anchor Unit 267

056032 GKW Ballast 2.25 t 260
056003 GKW Ballast Support 260
7.30
056019 GKW Boom 600 263
056000 GKW Carriage Beam with Rollers 260
056028 GKW Compression Unit U100-U160 266
056023 GKW Corner Handrail Post 266
056002 GKW Cross Beam 280, left 260
056001 GKW Cross Beam 280, right 260
056012 GKW Cross Beam 350, left 260
056011 GKW Cross Beam 350, right 260
056010 GKW Cross Brace 270 262
056009 GKW Cross Brace 316 261
056014 GKW Cross Brace 334 261
056018 GKW Cross Frame 264
056004 GKW Diagonal Brace 388 262
056007 GKW Diagonal Brace 423 262
056030 GKW Fastener Kit 267
056022 GKW Handrail Post 266
056008 GKW Horizontal Strut 246 261
056005 GKW Intermediate Strut 262 262
056013 GKW Intermediate Strut 324 262
056020 GKW Parapet Upright 480 264
056021 GKW Platform Beam 340 265
056026 GKW Spindle Coupler, cpl. 265
056016 GKW Tension Strut for Boom 263
056027 GKW V-Beam 265
056006 GKW V-Boom Support 261
101773 Heavy Duty Spindle SLS 80/140 267
024590 Wedge Lowering Device 420 kN 267

259
GKW Cantilevered Parapet Carriage
Weight kg Item no.

GKW Carriage Beam with Rollers 444,00 056000

Powder coated.
Complete with:
rollers (4x), galvanised pins ø 30x240 (2x)
and cotter pins FS 5/1 (4x).

2940 400

590
2000

GKW Cross Beam 350, right 212,00 056011

GKW Cross Beam 350, left 212,00 056012
GKW Cross Beam 280, right 182,00 056001
GKW Cross Beam 280, left 182,00 056002
Powder coated. ø 41
For erecting carriage.
ø 30,5

3500
4120

ø 41

ø 30,5

610
160

2800
3420

GKW Ballast Support 126,00 056003

Powder coated.
For carrying counterweights.

2820 200
190

2400 250
GKW Ballast 2,25t 2250,00 056032
1500

260
 Weight kg Item no.

GKW Cross Brace 334 51,50 056014

For bracing 3,50m gauge carriage frame
GKW Cross Brace 316 49,30 056009 Diagonal bracing 334 (2570) = Cross beam 350 ø 18
For bracing 2,80m gauge carriage frame Diagonal bracing 316 (2574) = Cross beam 280
Diagonal bracing 316 (2464) = Boom support
7.30

Diagonal bracing 334 (2128) = Cross beam 350

Diagonal bracing 316 (1832) = Cross beam 280

and top half of boom supports.

Diagonal bracing 316 (1977) = Boom support

Powder coated.
Di
ag
Di on
ag al
on br
al ac
br ing
ac 33
ing 4
31 (3
6 34
(3 0)
15 =
9) Cr
= os
Cr sb
os ea
sb m
ea 35
m 0
28
0

GKW V-Boom Support 151,00 056006

Powder coated.
ø 41
Complete with:
Pin ø 30x240 (1x) and
Cotter pins FS 5/1 (2x).

4004

ø 41

160
280

GKW Horizontal Strut 246 27,20 056008

Powder coated
Spacer for boom supports.

2534 50
100

ø 18

261
 Weight kg Item no.

GKW Diagonal Brace 423 80,20 056007

GKW Diagonal Brace 388 74,20 056004
Powder coated.
Complete with:
Pins ø 40x240 (2x) and
Cotter pins FS 5/1 (4x).
For fitting between cross beam
and boom support.

116

240

Diagonal brace 423 (4366)

Diagonal brace 388 (4020)
Diagonal brace 423 (4226)
Diagonal brace 388 (3880)
100

GKW Intermediate Strut 324 63,60 056013

GKW Intermediate Strut 262 53,10 056005
Powder coated.
Complete with:
Pins ø 40x240 (2x) and
Cotter pins FS 5/1 (4x).
For fitting between cross beam
and boom support.

116

240

Intermediate strut 324 (3378)

Intermediate strut 262 (2755)
Intermediate strut 324 (3238)
Intermediate strut 262 (2615)
100

GKW Cross Brace 270 42,50 056010

Powder coated.
For bracing bottom half of the
boom supports.

2464
ø 18
1100

269
8

262
 Weight kg Item no.

GKW Boom 600 397,00 056019

Powder coated.
Complete with:
Pin ø 30x240 (1x) and 7.30
Cotter pins FS 5/1 (2x).

600
598

ø 41

1160 1160
6160

GKW Tension Strut for Boom 87,30 056016

Powder coated.
Complete with:
Pins ø 40x240 (2x) and
Cotter pins FS 5/1 (4x).
For fitting between boom
and boom support.

4859
120

4709
240

263
 Weight kg Item no.

GKW Cross Frame 49,70 056018

Powder coated.
2 No. required for fixing between booms
600 and 1 No. between parapet uprights.

2202 60
ø 18

1220
GKW Parapet Upright 480 297,00 056020
Powder coated.

1160

4800
598

770

264
 Weight kg Item no.

GKW Spindle Coupler, complete 29,10 056026

Powder coated.
7.30

910
ø 21

488
ø 18

400
GKW V-Beam 154,00 056027
Powder coated.
Supports cantilevered parapet formwork.
800
7x60=420 198

20
ø 21
3220

34 x 50 = 1700

Accessories:
U160
Hook Strap HB 24-140/160, galv. 0,68 024080

GKW Platform Beam 340 160,00 056021

Powder coated.
For work platform assembly.

3476 450

ø 18 ø 18 ø 18
430
U160

265
 Weight kg Item no.

GKW Handrail Post 16,90 056022

Powder coated. 60

ø9

1995
ø 18

GKW Corner Handrail Post 17,00 056023

Powder coated.
ø9

1905

ø9

60 340

GKW Compression Unit U100-U 160 7,60 056028

Powder coated.
ø 21
Connects GKW V-Beam to GKW
spindle coupler.
178

370
120

266
 Weight kg Item no.

Heavy duty spindle SLS 80/140 12,60 101773

Powder coated.
746
ø 21 7.30

min 800
max 1400

GKW Anchor Unit, complete 19,50 056029

Powder coated.
Permissible load = 10kN
Accessories: expansion bolts 79
0
e.g. HILTI HSL M24 (3x) per anchor plate

280
430

ø 26

150

Wedge Lowering Device 420kN 32,00 024590

Allows large loads to be released
or lowered. SW 46 75
Load capacity = 420kN

max 268
min 168
Lowering range: 168-268mm

200

230
50

ø 32
160

260

GKW Fastener Kit 21,00 056030

For erecting PERI GKW
cantilevered parapet carriage.
Consisting of:

Quantity Name Size ISO/DIN Item no.

84 Hex. Bolt M16x 60 ISO 4014-8.8, galv. 710299
12 Hex. Bolt M16x 80 ISO 4014-8.8, galv. 710222
16 Hex. Bolt M16x110 ISO 4014-8.8, galv. 710233
6 Hex. Bolt M20x100 ISO 4014-8.8, galv. 024910
112 Hex. Nut M16 ISO 7042-8, galv. 710229
112 Washer M16 ISO 7089-200 HV 711074
6 Hex. Nut M20 ISO 7042-8, galv. 710334
6 Washer M20 ISO 7089-200 HV, galv. 710871
56 Plain washer 18 DIN 434, galv. 710880

267
268
7.40 Cantilevered Parapet Platform GKB

Page

102786 Adapter 1/2" - 3/4" 277

026420 Anchor Positioning Stud M 24, galv. 277
102111 Anchor Sleeve M24, galv. 277
026400 Anchor Sleeve M24, Stainless Steel 277
108360 Anchor Sleeve M24, Stainless Steel spec. L. 277
026240 Cone for Anchor Sleeve M24 277
072160 Extension 1/2" l=250mm 277 7.40
750076 F.H. Bolt DIN 603 M 8x90 w.N, galv. 270
102217 GKB Abutment Bracket 180 273
102220 GKB Abutment Platform 180x120 273
102219 GKB Abutment Platform 180x240 273
102394 GKB Anchor Bolt M24x200/10° 277
102327 GKB Cantilever Parapet Bracket 180 271
102185 GKB Cantilever Parapet Platform 180x120 271
102184 GKB Cantilever Parapet Platform 180x240 270
102195 GKB Formwork Projecting Slab 140x120 276
102395 GKB Handrail Post 270
102396 GKB Handrail Post 115° 276
102188 GKB Protection Board 90/120 276
102187 GKB Protection Board 120 271
102186 GKB Protection Board 240 270
102778 GKB Side Formwork 60x120 272
102779 GKB Side Formwork 60x245 272
102329 GKB Side Formwork Beam 272
102317 GKB Socket M24/15-35 277
102193 GKB Soffit Formwork 45x120 272
102190 GKB Soffit Formwork 45x245 272
102328 GKB Soffit Formwork Beam 272
102196 GKB Spindle for Cantilever Slab Formwork 276
102197 GKB Work Cage 274
104181 GKB Work Cage Protection Panel 275
026250 Plug Ø 26mm for Anchor Sleeve M24 277
021790 Ratchet Spanner SW 24 "Combi" 277
072180 Ratchet Wrench 1/2 " 277
102784 Socket SW 24-1/2" 277
102785 Socket SW 36-3/4" 277

D -PR
ÜFZ
ER
BG

Bau
00063

geprüfte
Sicherheit

269
GKB Cantilevered Parapet Carriage
Weight kg Item no.

GKB Cantilevered Parapet Platform 180x240 318,00 102184

For shuttering cantilevered parapets
up to 450 wide and up to 600mm high.
Fully assembled with 39mm thick 2187
staging and toe board.
Complete with:
Pin ø 16x200 (4x), SW 24
Cotter pin 4/1 (4x).

661
adjusting spindle SW 24

pin ø 16x300 item no.: 102492

cotter pin 4/1 item no. 018060

575
2400

1250
Accessories:

575
Ratchet Handle 1/2” 0,56 072180
Socket 24mm-1/2” 0,095 102784
Extension 1/2” L = 250mm 0,34 072160
For operating the adjusting spindle.
Combination Ratchet Spanner 1,00 021790
For manipulating the anchor bolt.

GKB Protection Board 240 78,50 102186

Fully assembled with 21mm thick
formlining plywood.
2400
1893

348 575 1250 575

Component:
GKB Handrail Post (2x) 12,30 102395
F. H. Bolt DIN 603 MU M8x90, galv. (10x) 0,04 750076

270
 Weight kg Item no.

GKB Cantilevered Parapet Platform 180x120 262,00 102185

Used as filler platform for shuttering
parapets up to a maximum of 450mm wide,
600mm high, and for shuttering cantilevered
parapets with electrical protection slabs. 2187

Fully assembled with 39mm thick staging

and toe board. Complete with: Pin ø 16x200 (4x),
SW 24
Cotter pin 4/1 (4x). 7.40

661
adjusting spindle SW 24

pin ø 16x300 item no.: 102492

cotter pin 4/1 item no.: 018060

2875
1200

625
Accessories:

2875
Ratchet Handle 1/2” 0,56 072180
Socket 24mm-1/2” 0,095 102784
Extension 1/2” L = 250mm 0,34 072160
For operating the adjusting spindle.
Combination Ratchet Spanner 1,00 021790
For manipulating the anchor bolt.

GKB Protection Board 120 51,70 102187

Fully assembled with 21mm thick 1200
formlining plywood.
1893

348
Component: 2875 625 2875
GKB Handrail Post (2x) 12,30 102395
F. H. Bolt DIN 603 MU M8x90, galv. (10x) 0,04 750076

488
GKB Cantilevered Parapet Bracket 180 99,70 102327
10°
pin ø 16x300 item no.: 102492
cotter pin 4/1 item no.: 018060
SW 24
680

adjusting spindle SW 24
120

1810
500

Complete with:
pin ø 16x300 (1x),
cotter pin 4/1 (1x) 2164

271
 Weight kg Item no.

GKB Soffit Formwork 45x245 85,10 102190

VT 20K VT 16K
GKB Soffit Formwork 45x120 57,90 102193
For shuttering cantilevered parapets
up to 450 wide and up to 600mm high.

2875
Complete with:
Pin ø 16x200 (6x),

600
cotter pin 4/1 (6x),
21mm thick formlining plywood

1200
625
2875
1250

2450
743

623

200(160)
523
600
adjusting spindle Pin ø 16x200,
SW 24 item no.: 102492
Component: Cotter pin 4/1,
item no.: 018060
GKB Soffit Formwork Beam (2x) 19,20 102328
Coach Screw DIN 571 M8x60, galv. (8x) 0,023 024270

GKB Side Formwork 60x245 53,50 102779

GKB Side Formwork 60x120 32,60 102778
For shuttering cantilevered parapets
up to 450 wide and up to 600mm high.
Complete with:
Pin ø 16x200 (6x), cotter pin 4/1 (6x),
21mm thick formlining plywood

2875 625 2875

1200
160

623

600 1250 600

2450

Accessory:
GKB Soffit Formwork Beam (2x) 19,40 102329

GKB Side Formwork Beam 19,40 102329

Complete with: crane eye
Pin ø 16x200 (3x), adjusting spindle
SW 24
Cotter pin 4/1 (3x).

4x30 = 120

ø 17
Pin ø 16x200,
max. 330

item no.: 102492

min. 35

Cotter pin 4/1,

item no.: 018060

272
 Weight kg Item no.

GKB Abutment Platform 180x240 269,00 102219

GKB Abutment Platform 180x120 222,00 102220
For shuttering cantilevered parapets adjusting spindle SW 24
up to a maximum of 450mm wide by

284

158
600mm high in the abutment area.
Fully assembled with 39mm thick
platform staging. Pin ø 16x200, item no.: 102492

1185
Complete with: Cotter pin 4/1, item no.: 018060 7.40
pin ø 16x300 (2x)
cotter pin 4/1 (2x)

575
1250
2400

575
2875
Accessories:
1200

625
Hex bolt ISO 4014 M24x70-10.9 (SW36) 0,33 026430
GKB Protection Board 240 78,50 102186
GKB Protection Board 120 51,70 102187
Ratchet Handle 1/2” 0,56 072180 2875
Socket 24mm-1/2” 0,095 102784
Socket 36mm-3/4” 0,45 102785
Adapter 1/2”-3/4” 0,15 102786 1820
Extension 3/4” L = 200mm 0,52 051776
For operating the adjusting spindle.

GKB Abutment Bracket 180 84,70 102217

Complete with: 1834
Pin ø 16x200 (1x),
Cotter pin 4/1 (1x).
245

adjusting spindle SW 24
1185

Pin ø 16x 200, item no.: 102492

Cotter pin 4/1, item no.: 018060
276

273
 Weight kg Item no.

GKB Work Cage 590,00 102197

Powder coated, yellow
Complete with:
Pin ø 20 for bracket connection (2x),
Clamping spindle (2x),
Height safety unit (1x).

4000
! Important:
– Classified as gear for lifting personnel.
Loading capacity 520kg.
– Follow Instructions for Use
on the name plate!
– (These form part of the Erection
and Utilisation Instructions for
GKB cantilevered parapet formwork). clamping spindle
item no. 102690

2785
2466
600

300

2555

anchor for
safety srap
1616

740

940
pin ø 20 left pin ø 20 right
item no. 102737 1250 item no. 102734
625

274
 Weight kg Item no.

GKB Work cage protection board 635,00 104181

For use on electrical protection walls
in the area of overhead lines with
a maximum height of 1,90m.
Complete with:
Pin ø 20 for bracket connection (2x),
Clamping spindle (2x),
7.40

2100
Height safety unit (1x).
! Important:
– Classified as gear for lifting personnel.
Loading capacity 520kg.
– Follow Instructions for Use
on the name plate!
– (These form part of the Erection
and Utilisation Instructions for
GKB cantilevered parapet formwork).

clamping spindle

3584
item no. 104190

3267

300

2516

anchor for
safety srap
1616

740

940
pin ø 20 left pin ø 20 right
item no. 102737 1250 item no. 102734

275
 Weight kg Item no.

GKB Formwork for Electrical

Protection Slabs 140x120 116,00 102195
For shuttering electrical protection slabs
in combination with 120x180 GKB platform.

2875
1200
625
2875
1500

371

569
Accessories:
GKB Spindle for Formwork for
Electrical Protection Slabs (2x) 19,10 102196

GKB Protection Board 90/120 96,80 102188

Needed when shuttering electrical
protection slabs in combination with
GKB platform 120x180.

25°
1750

1205 2875 625 2875

1950 1200

Component:
GKB Handrail Post 90/115° (2x) 22,90 102396
F. H. Bolt DIN 603 MU M8x90, galv. (10x) 0,04 750076

GKB Spindle for Slab Formwork 19,10 102196

Complete with:
Pin ø 16x200 (2x),
Cotter pin 4/1 (2x).

210 226

pin ø 16x200 item no.: 102492

cotter pin 4/1 item no.: 018060
max. 820
min. 610

adjusting spindle SW 24

Accessories:
Ratchet Handle 1/2” 0,56 072180 200

Socket 24mm SW 24-1/2” 0,22 102784 300

Extension 1/2” L = 250mm 0,34 072160
For operating the adjusting spindle.

276
GKB Anchors and Mounting Accessories
Weight kg Item no.

Anchor bolt sleeve M24, galv. 1,03 102111

Anchor bolt sleeve M24 stainless steel 1,11 026400
Permissible load see product information.
152 100

24 129 8 68

ø 12
15
7.40

ø 30,5
ø 33,7
Accessories:
Cone for anchor sleeve M24 0,013 026240 cone for anchor sleeve M24 M24
Plug for anchor sleeve M24 0,005 026250
Anchor positioning stud M24, galv. 0,223 026420

L
Bolt Anchor Sleeve M24, stainless steel
12 min. 108 20
spec. Length 2,19 108360 120

ø 35

ø 30
50 50 M25 x 50 M24

GKB Anchor Bolt M24x200/10° 1,94 102394

for inclinations of up to 10° 200
100

SW 24

ø 75
M24

GKB Threaded Sleeve M24/15-35 3,67 102317

for subsequent installation of anchor min. 130
max. 360 ø 10

SW 55
*Since a generally applicable
value cannot be specified in
M36

M24

this context, the permissible

load must be determined taking
account of the conditions under 400 120
which the sleeve is to be used.

Ratchet Wrench 1/2” 0,56 072180

Length approx. 270mm

Socket 24mm-1/2” 0,095 102784

Socket 36mm-3/4” 0,45 102785
Extension 1/2” L = 250mm 0,34 072160
Adapter 1/2”-3/4” 0,15 102786
For using Socket SW 36-3/4˝
on the ratchet wrench 1/2˝.

Ratchet Spanner SW 24 "Combi" 1,00 021790

for manipulating the anchor bolt.

277
278
8.10 SKYDECK

Page

103606 Anchor Bolt PERI MMS 20x130 286

065073 Anchor Chain 3.0kN l=2.5m 286
028100 Base Plate for RS 286
061180 Combihead SCK 284
061038 Cover Strip SAL 37.5 280
061024 Cover Strip SAL 50 280
061027 Cover Strip SAL 75 280
061026 Cover Strip SAL 150 280
061210 Drophead SFK 282
061035 Drophead SFK/27 282
061046 Edge Beam SRT-2 75 281 8.10
061045 Edge Beam SRT-2 150 281
061023 End Support SSL 283
061300 Erection Aid SSH, Alu 285
061049 Filler Timber SPH 150 281
061036 Filler Timber SPH 225 281
061042 Grid Beam SRO 75 282
061044 Grid Beam SRO 75/27 282
061041 Grid Beam SRO 150 282
061043 Grid Beam SRO 150/27 282
061250 Handrail Holder SGH 284
061260 Handrail Post SGP 284
061230 Hex. Bolt DIN 6914 M12x140-10.9 288
061110 Main Beam SLT 150 281
061100 Main Beam SLT 225 281
061160 Main Beam SLT 375 281
061510 Pallet Lifting Trolley 1500mm 289
061500 Pallet SD 150x 75, galv. 288
061530 Pallet SD 150x225, galv. 289
061290 Panel Clip SPK 285
061030 Panel SDP 75x37.5 280
061013 Panel SDP 75x50 280
061010 Panel SDP 75x75 280
061020 Panel SDP 150x37.5 280
061011 Panel SDP 150x50 280
061000 Panel SDP 150x75 280
061280 Panel Wedge Clip SPKK 285
061060 Platform SDB 150 287
061061 Platform SDB 225 287
061062 Platform SDB 300 287
061066 Plywood Planking SDB 150 287
061067 Plywood Planking SDB 225 287
061068 Plywood Planking SDB 300 287
061200 Prophead SSK 282
102031 Stripping Cart ASW 465, complete 290
035500 Stripping Cart, Alu 290
061052 Table Connector STV 288
061310 Tension Sleeve SAO 283
061520 Transportation Fork SUG, galv. 286
061022 Triangular Frame SDR 75x75 285
061016 Triangular Frame SDR 75x75/27 285
061021 Triangular Frame SDR 150x75 285
061015 Triangular Frame SDR 150x75/27 285
065074 Turnbuckle 3.0kN, M 12 286
061051 Wall Holder SWH-2 283

German Approval Certificate SKYDECK

D Slab Formwork, No. S-N 000101

For SKYDECK Platform

D -PR
ÜFZ
ER
BG

Bau
98051

geprüfte
Sicherheit

279
SKYDECK and Accessories
Weight kg Item no.

Panel SDP, Alu

Powder-coated.
Formlining: 9mm Finply
(100% Fin. birch)

21
SDP 150x75 = 1,13m2 15,50 061000

120
Filler panels:

99
SDP 150x50 = 0,75m2 11,70 061011
SDP 150x37,5 = 0,56m2 10,60 061020
SDP 75x75 = 0,56m2 8,60 061010 1500

SDP 75x50 = 0,37m2 6,37 061013

SDP 75x37,5 = 0,28m2 5,04 061030

750
500
375
750

750 500 375

Cover Strip SAL 1500

Plastic. For use with drophead.
Plywood thickness 21mm.
SAL 150 1,55 061026
SAL 75 0,77 061027 300 275 350 400 175
SAL 50 0,55 061024
SAL 37,5 0,38 061038
750

300 275 175

500

200 300

78
*Plywood thickness 27mm 375
SAL 150/27 1,65 061028
27*
22

SAL 75/27 0,84 061029

82

SAL 37,5/27 0,45 061039

280
 Weight kg Item no.

Main Beam SLT

Alu, powder-coated. With rack made of 1494
highly impact-resistant plastic.
Bracket axis 1500
SLT 225 Standard beam 15,40 061100
SLT 150 For filler areas 10,30 061110

225

190
SLT 375 For tables and overhangs 25,50 061160

Detail x

187 1120 187

120
2244
8.10
72 Bracket axis 2250

161
275

240
Detail x
13
70
Detail x
13
300 450 375 375 450 300
24

3744
1042 Bracket axis 3750 1042
161
240

13

Detail x
300 450 750 375 375 750 450 300
82 266

745
Edge Beam SRT-2, Alu
49 595
Powder-coated. For longitudinal and
transverse filling, for shuttering around
93*
98

columns. Plywood thickness 21mm

SRT-2 75 2,86 061046 43
660
SRT-2 150 6,16 061045
68 610

1495
1345

43 1410

*Plywood thickness 27mm (yellow) 68 1360

SRT-2 75/27 2,86 061048
14

35

SRT-2 150/27 6,16 061047

Filler Timber SPH

For longitudinal and transverse filling,
individually adaptable.
Plywood thickness 21mm
SPH 150 4,00 061049
49
SPH 225 6,00 061036 1500
93*
98

2250

*Plywood thickness 27mm

SPH 150/27 3,38 061050
SPH 225/27 5,07 061040

281
 Weight kg Item no.

Grid Beam SRO, Alu* SRO 150 5,96 061041

Powder-coated. SRO 75 3,03 061042
For use in the grid beam system.
Plywood thickness 21mm

* is no longer produced 750

720

93*
98
100

62
1500
1470

93*
98
100

62
*Plywood thickness 27mm (yellow)
SRO 150/27 6,18 061043
SRO 75/27 3,14 061044

Prophead SSK 3,92 061200

Powder-coated.
With self-locking coupling.
Supports panels, main beams, secondary
beams, edge beams and filler timber.

50
259

160 80
250

80
72

4
18

Drophead SFK 6,08 061210

Powder-coated.
With self-locking coupling.
40
Supports main beams as well as 250

cover strip or formlining. Lowers 60mm.

253*
258

390
60 Lowering

550
80

80
*Drophead SFK/27 6,07 061035
Plywood thickness 27mm (yellow)

282
 Weight kg Item no.

Tension Sleeve SAO 1,00 061310

Powder-coated.
Locking device to prevent grid beams from

63
lifting off. For anchoring cantilevers.

149
F

70
Permissible Load (F): 3kN 8.10

End Support SSL 2,10 061023

Powder-coated.
For the transition from beam to panel

102

160
without beam, or edge beam or secondary
beam when filling gap.

85
165

Wall Holder SWH-2, Alu 5,56 061051

Powder-coated.
For anchoring the formwork to the
37
wall horizontally.
Attach to every second beam or panel.
140

275
245
270

100
1490
adjustment range 1050

DW 15

202 30

100

283
 Weight kg Item no.

Combi-Head SCK 5,33 061180

Powder coated.
With self-locking coupling.
Supports main beams, panels,

50
259
edge beams and Filler Timber.

161
250

305
Handrail Holder SGH, Alu 5,03 061250
Powder-coated.
With quick locking device
for mounting on the main beam. 300 1605
70
305

368
245
1500

Accessorie:
Handrail Post SGP 5,82 061260

Handrail Post SGP 5,82 061260

Powder-coated.
For use with SGH Handrail Holder.
Height of handrail above top of panel = 1,40m

35 65
120

ø5
425
1416

425
1750

44

ø 10 112
15

284
 Weight kg Item no.

Panel Clip SPK, galv. 0,13 061290

Fixes panels on main beam.

121
50 43

Panel Wedge Clip SPKK 0,75 061280 78 80

Powder-coated.
8.10

115
116

Applications
1. Panel joint in middle of 2. Projecting panel Panel/Panel
main beam Panel/Panel connection with main beam
connection with main beam

125 Side view

Triangular Frame SDR, Alu 93* 1500

Powder-coated. 98
For non-right angled filler applications.
750

93*
98 750

Plywood thickness 21mm

SDR 150x75 8,79 061021
SDR 75x75 5,45 061022
750

*Plywood thickness 27mm (yellow)

SDR 150x75/27 7,54 061015
SDR 75x75/27 4,68 061016

Shuttering Aid SSH, Alu 2,32 061300

Powder-coated.
Adjustable in 75mm
increments.
min. 2325-max. 3750

285
 Weight kg Item no.

Transportation Fork SKYDECK SUG, galv. 403,00 061520

For moving SKYDECK tables with a crane.
Comply with the instructions for use
given on the type plate.

3240

2800
type plate

1434
3900

1224

1040

80
Lifting device to BGR 500
Permissible load: 1000kg

Anchor Chain 3,0kN L = 2,5m 1,37 065073

Galvanized.
14

2500

Permissible Tension Load: 3kN.

Turnbuckle 3,0kN, M12 0,45 065074

Galvanized.
16

min. 220

Permissible Tension Load: 3kN. max. 300

Base Plate for RS 1,86 028100 60

Complete with: ø 13 ø 21
ø 21
Pin ø 16x65/86 and Cotter Pin 4/1 (1x).
80

90

60
65

10

40 40 55 30 25
150

Anchor Bolt PERI MMS 20x130 0,33 103606

For erecting push-pull props without plugs, SW 30
tension cables etc.
Use drill ø 18mm to DIN 8035
drilling depth
min 140
130

20

286
 Weight kg Item no.

Platform SDB
1288
SDB 300 185,00 061062
SDB 225 153,00 061061
SDB 150 108,00 061060

1000
For work and protective access to

1220
DIN 4420. Scaffold width 1,30m.
With continuous 39mm thick staging
and folding handrail frame for easy 1448
transporting. Platform SDB 225 cantilevers
by 750mm to the left or right.

8.10

2990

2240

1490
1000
1300

2250

1500
SDB 300

3000
1500
SDB 225
1500

2250
750
750

2250

SDB 225
1500

Spare Parts:
Handrail Frame SDB, galv.
Foldable.
SDB 300 33,30 061065
SDB 225 25,90 061064
SDB 150 18,50 061063
SDB 150
Plywood Planking SDB
1500

With continuous 39mm thick staging.

SDB 300 73,10 061068
SDB 225 54,50 061067
SDB 150 35,90 061066

287
 Weight kg Item no.

Hex. Bolt M12x140 DIN 6914-10.9 0,14 061230

SW 22

140
Accessories:

23
Hex. Nut ISO 4032 M12-8, galv. 0,017 710330
Washer ISO 7089-12-200HV, galv. 0,006 780702

330 74
Table Connector STV 2,56 061052
For connecting SKYDECK tables.
Also used for setting props at any

70
location at the Main Beams.
Complete with:
Ring screw M12 DIN 582 85

Pallet SD 150x75, galv. 77,80 061500 ! Important safety note!

For stacking and transportation of When stacking light, large surface
14 SKYDECK Panels 150x75. items outdoors the maximum
stacking height must be reduced.

1720

1970
120

60 580 60

1630
640

760

Lifting device to BGR 500

Permissible load: 1000kg

Max. stacking height: 2

Min. length of rope: 3,0m

288
 Weight kg Item no.

Pallet SD 150x225, galv. 83,60 061530

For stacking and transportation of
48 SKYDECK Panels 150x75.
Complete with:
5 tension straps

250
8.10

1550
2310

120
120
190
2110

Lifting device to BGR 500

Permissible load: 750kg

Pallet Lifting Trolley 110,00 061510

Length of Forks: 1550mm
Support Width of Forks: 520mm
Lifting Range: 85 to 195mm

Lifting appliance to BGV D8

Permissible load: 2000kg

289
 Weight kg Item no.

Stripping Cart ASW 465 363,00 102031

Complete with:
1 Steel traverse 140/220 ASW (1x) 32,60 102033
consisting of 3 parts

1150
2 Folding base unit 160/190 ASW (1x) 18,60 102025
3 Vertical frames 70/90 ASW (6x) 4,40 102035
4 Vertical frames 70/120 ASW (6x) 4,90 102034
2360 1100
5 Entry platforms 190 ASW (2x) 14,80 102026
6 Toe-board set 70/190 ASW (1x) 8,00 102030
7 Double handrails 190 ASW (4x) 5,30 102027 1
8 Diagonal braces 210 ASW (3x) 2,40 102028
9 Horizontal braces 190 ASW (2x) 2,30 102029
10 Wind security clip 60 ASW (8x) 0,06 102037
11 Ballast 10kg ASW (12x) 10,00 102807

Packed in:
Ring pallet USP 104, galvanized 65,60 100678
Complete with:
Lashing strap 25x5750mm (1x) 0,50 100707
Scaffold Tube steel ø 48.3x3.2, L = 1,0m 3,55 026411 2
as Ring extensions (6x)
Max. platform height = 4,65m
Max. working height = 6,65m
Platform height alterations 4
∆ = 300mm 3

5 7

8
6
9
Ring pallet USP 104, galv.
Observe operating instructions! 10 11
Lifting device to BGR 500
Permissible load: 1200kg

Stripping Cart, Alu 77,00 035500

Platform height: up to 2,00m
Permissible load: 100kg/m2
handrail height 980

250
3035

platform height 2000

ø 48

1800 750

290
 8.10

291
292
9.10 MULTIFLEX

Page

027930 Assembly Bar 24, galv. 296

027790 Brace Clamp HL, galv. 298
027940 Brace Clamp, galv. 298
028660 Clawhead 16/20 S, galv. 295
028670 Clawhead 16/20, galv. 295
028880 Clawhead 24 L, galv. 294
028890 Clawhead 24 S, galv. 294
018060 Cotter Pin 4/1, galv. 297
028690 Crosshead 16 S, galv. 295
028700 Crosshead 16, galv. 295
028680 Crosshead 20/24 S, galv. 294
027890 Crosshead 20/24, galv. 294
106989 Crosshead PEP 10 / VT 20 296
070740 Erection Bar GT/VT, galv. 296
035700 Handrail Holder 297 9.10
028870 Lowering Head 20/24, galv. 296
027990 Pin Ø 14x107, galv. 297
102031 Stripping Cart ASW 465, complete 299
035500 Stripping Cart, Alu 299
028590 Tension Strap 16-25, galv. 297
107152 Tripod PEP 10 298
027860 Tripod, galv. 298
028000 Universal Tripod, galv. 298

293
MULTIFLEX and Accessories
Weight kg Item no.

Crosshead 20/24 S, galv. 3,24 028680 Required diameter of hole in the

With self-locking coupling. endplate of the prop ø 40mm.
Providing stable support for single
or twin GT 24 or VT 20K Girders.
Girder overlap at both ends of at least 163mm
in the case of the GT 24, 15cm with VT 20K.
ø6

201
359
Crosshead 20/24, galv 3,12 027890
Without self-locking coupling.

240
210
170

125
155

85

Accessories:
Pin ø 14x107, galv. 0,15 027990
Cotter Pin FS 4/1, galv. 0,03 018060

Clawhead 24 S, galv. 1,67 028890 Required diameter of hole in the

With self-locking coupling. endplate of the prop ø 40mm.
For supporting the GT 24 Girder
at any location without nailing.

80 280

ø 10
64

Clawhead 24 L, galv. 1,55 028880

Without self-locking coupling.
161

With clawhead 24 S or 24 L, girders

GT 24 can even be supported outside the
node points with max. reaction at supports
Accessories: of 28kN being taken by the girder.
Pin ø 14x107, galv. 0,15 027990
Cotter Pin 4/1, galv. 0,03 018060

294
 Weight kg Item no.

Crosshead 16 S, galv.* 3,00 028690 Required diameter of hole in the

With self-locking coupling. endplate of the prop ø 40mm.
Providing stable support for single
or twin VT 16K Girders. Cantilever of
Girders at each end min. 150mm.
* is no longer produced
ø6

161
319
9.10

Crosshead 16, galv.* 2,88 028700

Without self-locking coupling.
* is no longer produced

240
210
170

155
125
85

Accessories:
Pin ø 14x107, galv. 0,15 027990
Cotter Pin 4/1, galv. 0,03 018060

Clawhead 16/20 S, galv. 1,06 028660 Required diameter of hole in the

With self-locking coupling. endplate of the prop ø 40mm.
For supporting the VT 20K or VT 16K Girder
at any location without nailing.

80 140
44

Clawhead 16/20, galv. 0,94 028670

Without self-locking coupling.
161

Accessories:
Pin ø 14x107, galv. 0,15 027990
Cotter Pin 4/1, galv. 0,03 018060

295
 Weight kg Item no.

Lowering Head 20/24, galv. 5,10 028870

Providing stable support for single
or twin GT 24 or VT 20K Girders.
Girder overlap at both ends of at least 163mm
in the case of the GT 24, 15cm with VT 20K.
Lowers 40mm.
85 ø7 170

195
385

Lowering 40
155 240

Accessories:
Pin ø 14x107, galv. 0,15 027990
Cotter Pin 4/1, galv. 0,03 018060

Crosshead PEP 10 / VT 20, galv. 1,42 106989 252

With self-locking mechanism.
1 VT 20
Providing stable support for single
or twin VT 20K girders.
153

2 VT 20
180

Erection Bar GT/VT, galv. 2,97 070740

For easy erection of MULTIFLEX
with GT 24 or VT girders.

1711
190
150
85

ø 34

Assembly Bar 24, galv. 3,09 027930

For easy erection of MULTIFLEX
with GT 24 girders.
20

ø 34
95

50

1550

296
 Weight kg Item no.

Tension Strap 16-25, galv. 0,57 028590

For clamping 2 Girders GT 24,
VT 20K or VT 16K onto Crosshead
20/24 (S) or Crosshead 16 (S).

270

110
210 12

9.10

Pin ø 14x107, galv. 0,15 027990

For fixing Crossheads as well as 129
Clawheads etc.
4 110

ø 26

ø 14
ø5

Cotter Pin 4/1, galv. 0,03 018060

For Pins to ø 25mm.

ø4
Handrail Holder 9,79 035700
For easy and quick clamping to concrete
slabs for supporting handrails. 190
Adjustable from 20 up to 420mm.
30 65
120
460

995
max 420
min 20

70

185

297
 Weight kg Item no.

Universal Tripod, galv. 9,26 028000

For props ø 48 to ø 120mm.
Can also be used in combination
with MULTIPROP Base MP 50.

853

800
555
357
ø 48 – 120

Only to be used as an erection device!

Tripod, galv.* 8,98 027860

For props ø 57 to ø 89mm.

780

615
*for hire only

Only to be used as an erection device! 840 585

Tripod PEP 10, galv. 5,40 107152

For PEP 10 props ø 44 to ø 64mm.
640

Only to be used as an erection device!

Brace Clamp, galv. 1,85 027940

min ø 48
Diameter of prop ø 48 up to 76mm.
max ø 76
Board max 30
186

40 210
400
Size of bracing board 30x150mm.

Brace Clamp HL, galv. 2,48 027790 max 120

min ø 76
Diameter of prop ø 76 up to 89mm
as well as 100 up to 120mm.
100

120
239

Board max 30

40 210
450
Size of bracing board 30x150mm.

298
 Weight kg Item no.

Stripping Cart ASW 465 363,00 102031

Complete with:
1 Steel traverse 140/220 ASW (1x) 32,60 102033
consisting of 3 parts

1150
2 Folding base unit 160/190 ASW (1x) 18,60 102025
3 Vertical frames 70/90 ASW (6x) 4,40 102035
4 Vertical frames 70/120 ASW (6x) 4,90 102034
2360 1100
5 Entry platforms 190 ASW (2x) 14,80 102026
6 Toe-board set 70/190 ASW (1x) 8,00 102030
7 Double handrails 190 ASW (4x) 5,30 102027 1
8 Diagonal braces 210 ASW (3x) 2,40 102028
9 Horizontal braces 190 ASW (2x) 2,30 102029
10 Wind security clip 60 ASW (8x) 0,06 102037
11 Ballast 10kg ASW (12x) 10,00 102807

Packed in: 9.10

Ring pallet USP 104, galvanized 65,60 100678
Complete with:
Lashing strap 25x5750mm (1x) 0,50 100707
Scaffold Tube steel ø 48,3x3,2, L = 1,0m 3,55 026411 2
as Ring extensions (6x)
Max. platform height = 4,65m
Max. working height = 6,65m
Platform height alterations 4
∆ = 300mm 3

5 7

8
6
9
Ring pallet USP 104, galv.
Observe operating instructions! 10 11
Lifting device to BGR 500
Permissible load: 1200kg

Stripping Cart, Alu 77,00 035500

Platform height: up to 2,00m
Permissible load: 100kg/m2
handrail height 980

250
3035

platform height 2000

ø 48

1800 750

299
300
9.20 Tableform, UNIPORTAL

Page

028720 Attachment 100 for Striking Trolley 305

102210 Back Stop Lifting Fork 1t / 5.0m 308
101854 Central Cross 170 305
102251 Central Cross 200 305
019130 C-Hook 15kN, galv. 309
028560 Crane Lifting Unit, Lower Part - UNIPORTAL 307
028570 Crane Lifting Unit, Upper Part 307
104050 Extension 60 for Striking Trolley 305
035700 Handrail Holder 310
101290 Handrail Holder GT24/VT20 310
061260 Handrail Post SGP 310
103212 Lifting Fork 1.75t/8.0m 308
101862 Lifting Fork 1t/5.0m 307
108108 PERI Table Lift PTL 1250 306
100778 Stiffening Board, timber, 420x400mm 304
072700 Table Module VT 2.00/2.15x4.00m 304
072710 Table Module VT 2.00/2.15x5.00m 304
072720 Table Module VT 2.50/2.65x4.00m 304
072730 Table Module VT 2.50/2.65x5.00m 304 9.20
028715 Table Striking Trolley 2t, l=170 305
028710 Table Striking Trolley 2t, l=200 305
100956 Table Swivel Head, Lower Part 303
100954 Table Swivel Head, Middle Part 303
100955 Table Swivel Head, Upper Part 303
028550 Tension Strap GT24, 22-31, galv. 302
028500 UNIPORTAL Head, galv. 302
028580 Yoke Waler UNIPORTAL 302

301
UNIPORTAL, PERI Tableform and Accessories
Weight kg Item no.

UNIPORTAL Head, galv. 37,90 028500

Complete with:
Quick clamping device to connect
standard steel props with ø 57mm or more
as well as PERI MULTIPROPs. 540
Safe working load = 56kN 340
150

ø 14

500
ø 20

260
140

195
Stacking height = 770

125
135
463

Tension strap for

GT 24
22-31, galv.

ø 20

135 215

Accessories:
Tension Strap GT 24, 22-31, galv. (2x) 0,62 028550

Tension Strap GT 24, 22-31, galv. 0,62 028550

2 per UNIPORTAL Head needed.
330

SW 19
110

112 M 12

Yoke Waler UNIPORTAL, galv. 9,85 028580

For additional support 340
of UNIPORTAL table forms.

ø9
60
100
50

520 30
Safe working load = 56kN
when load is transfered concentrically

302
 Weight kg Item no.

Table Swivel Head

Consisting of:
Upper Part of Table Swivel Head 6,08 100955
Middle Part of Table Swivel Head 9,06 100954
Lower Part of Table Swivel Head 11,80 100956
Load capacity: 56kN

VT 20K main girder GT 24 main girder

500 500

390
625
235
9.20

Upper Part of Table Swivel Head 6,08 100955 470

ø9 6 x 50 = 300 80

ø 15

256

400
Middle Part of Table Swivel Head 9,06 100954
Complete with:
mini wing nut Item no. 710338 (2x) and
locking washer Item no. 100960 (2x)
397

370
244

150

256

260

Lower Part of Table Swivel Head 11,80 100956

Complete with:
quick-action clamp for connecting all
common tubular steel props from ø 57mm 278
and PERI MULTIPROPs.
270

353 140
Spare part:
180
mini wing nut 0,093 710338

303
 Weight kg Item no.

VT Table Modules
Pre-assembled tableforms available for hire.
Formlining:
finnish combi plywood 21mm
Complete with: Cross section
bottom part of table swivel head
supplied loose 2150/2650
75 2000/2500 75
VT Table Module VT 2,00/2,15x4,00m 396,0 072700
VT Table Module VT 2,50/2,65x4,00m 451,0 072720

430
VT Table Module VT 2,00/2,15x5,00m 503,0 072710
VT Table Module VT 2,50/2,65x5,00m 569,0 072730 325/575 1500 325/575

Longitudinal section

750 2500 750

2000/2500
4000

Longitudinal section

750 2350 1150 750

2000/2500

5000

Stiffening Board, timber, 420x400mm 1,76 100778

Accessories:
Lower Part of Table Swivel Head 11,80 100956

304
 Weight kg Item no.

Table Striking and Transportation 433,00 028710

Trolley 2t, L = 200
Table Striking and Transportation 428,00 028715
Trolley 2t, L = 170
For moving PERI tableforms.
Not approved for transporting personnel.
Only move on clean, level and sufficiently strong surface.
Comply with relevant safety regulations.
Minimum Height: 1,45m,
min 1460 - max 2060
Maximum Height: 3,20m

max 3200
with extension 100: 4,20m 100 270 100

with extension 60 and

extension 100: 4,80m
Observe operating instructions!

min 1450
Lifting appliance to
BGV D8.
Perm. load of each jack: 1t

125
50
1500
1640
9.20

2000 (1700)
1610 (1310)

830
Accessories:
Centre Cross Bracing 200 26,30 102251 2630 (2330)
Centre Cross Bracing 170 21,80 101854

Extension 60 15,10 104050

2 extensions per trolley
With the extensions 60 and 100 the working
heights of the transportation trolley are
raised to a minimum height of 3,05m and
a maximum height of 4,80m.
Complete with:
200
Hex. Bolt ISO 4017 M16x45-8.8, galv. and 600
with Hex. Nut ISO 7042 M16-8, galv. (4x)

150 100
M16x45

Extension 100 for Table striking

and Transportation Trolley 34,60 028720
2 extensions per trolley. 1270

Use trolley's telescopic arms. 100 270 100

The Extension 100 increases the 105
5
100

trolley's working height:

Min. height: 2,45m, max. height: 4,20m
Complete with: ø 17
Hex. Bolt ISO 4017 M16x45-8.8, galv. and
890

with Hex. Nut ISO 7042 M16-8, galv. (4x)

10

100

200
150
200
150

M 16x45

305
 Weight kg Item no.

PERI Table Lift PTL 1250 1488,0 108108

For moving PERI slab tables.
Not approved for transporting personnel.
Use only on clean, flat and sufficiently
load-carrying surfaces. 1700
Observe valid safety regulations.

Min. height: 1,6m

Max. height: 5m
Load-bearing capacity: 1250kg
Required current supply for loading
procedure: 230V 50/60Hz
Follow operating instructions.

min. 1570
Floor conveyor vehicle

max. 5m
900
Load-bearing capacity: 1250kg

Complete with:
Canister with distilled water
Vehicle key
Documentation

1921

1000

306
 Weight kg Item no.

UNIPORTAL Crane Lifting Unit 255

Consisting of: ø 50
Crane Lifting Unit, Upper Part 3,51 028570
Follow Instructions for Use!

Lifting device to BGR 500

Permissible load: 500kg with
legs of lifting gear at ≤ 30°

400
to the vertical.

63
Lifting Unit,
Lower Part UNIPORTAL 1,83 028560 B 15 ø7

Load-bearing point
Permissible load: 500kg

Lifting Fork 1t / 5,0m, galv. 564,00 101862

Table length: up to 5,0m 9.20
Follow Instructions for Use!

Chain in
loaded state

Chain in unloaded
state

max. 7740
min. 7600
2598

ø 30 pin

Accessories: 4304
Back Stop Lifting Fork
1t / 5.0m Item no.: 102210

2161 750 750

3 x 150

max. 2012
min. 1113
1800
900

Stacking height
720

Lifting device to
BGR 500 3402 2073
Perm. load: 1,0t

307
 Weight kg Item no.

Back Stop Lifting Fork 1t / 5,0m 8,61 102210

Always use in pairs.

50

742
900
123
123
M 20

Lifting fork 1,75t / 8,0m, galv. 1552,00 103212

Table length: up to 8,0m
Follow Instructions for Use!

Chain in
loaded state

max. 11300
min. 11000
Chain in unloaded
state

3030

ø 40 pin

6255

2885 1240 1240

600

max. 2270
min. 1070
2000

800

Stacking height
980

800

Lifting device to
BGR 500 5050
Perm. load: 1,75t

308
 Manufacture of items shown on this
page has been discontinued. These
Weight kg Item no. items are only available from rental stock.

Hook 15kN, galv. 924,00 019130

Table length 4,0 up to 7,0m
Follow Instructions for Use!

9.20
Transit position

1540 – 2100
Bearers extendable 5645

790 4365
1800

1800
4664
3335

5720

2340 2200

Lifting device to
BGR 500
Perm. load: 1,5t

309
 Weight kg Item no.

Handrail Holder GT 24/VT 20 5,67 101290 GT 24 main girder

For using the safety handrail post SGP.
Complete with: 395
pin 20x140 (1x) and
cotter pin 4/1 (1x)

45
32
82
For mounting on
primary girder: vertical SHS upwards;
secondary girder: vertical SHS downwards;
VT 20K secondary girder

115

352
ø 21 ø 20 x 140
FS 4/1

Accessories:
Handrail Post SGP 5,82 061260 45

Handrail Post SGP 5,82 061260 35 65

For use with GT 24/VT 20 handrail holder.

120
ø5

425
1416

425
1750

44

ø 10 112
15

Handrail Holder 9,79 035700 190 65

For easy and quick clamping to concrete
slabs for supporting handrails.
120

Adjustable from 20 up to 420mm.

460

995
min 20

max 420

70
35

185

310
 9.20

311
312
9.30 UZ Beam Formwork, AW Stopend

Page

065075 AW Bracket 314

065072 AW Clamp 8-10 314
065071 AW Handrail Post 314
065070 AW Slab Stopend Angle 314
065056 UZ Beam Bracket 40 315
065057 UZ Beam Width Adjustment Bar 80 315
065065 UZ Beam Width Adjustment Bar 129 315
065058 UZ Beam Yoke Waler 100 315

9.30

313
AW Slab Stopend Angle, UZ Beam Formwork
Weight kg Item no.

AW Slab Stopend Angle 1,68 065070

Powder-coated.
For forming stopends of slabs up to 400mm.

240
Fixed to the plywood by nails.

400

ø 6.5 screw hole ø 3.5 nail hole

50

86
68

AW Bracket 1,77 065075

Slides into the AW Slab Stopend Angle.
For height adjustment of side beam.

67
240
max 220
min 40
140

122
AW Clamp 8-10 3,37 065072
With captive Triple Wingnut.
For clamping the AW Slab Stopend Angle
onto timbers or Girders 80-100mm wide.

132
40–220

90

275
266

AW Handrail Post 7,41 065071

Slides into the AW Slab Stopend
Angle from top. With captive locking
device secured and fixed with
500

additional nails to the plywood.

1439
nail holes

762
67

314
 Weight kg Item no.

UZ Beam Bracket 40 12,10 065056

Complete with: ø 17
Captive Hook Tie and Wingnut ø7
Counterplate DW15.

440
50
0
ø7 69

26

155
84
35
500
For allowable spacing see PERI tables.

UZ Beam Width Adjustment Bar 80 7,44 065057

Beam width max. 400mm.
963
Beam width more than 400mm 2 or more of
700
the Adjustment Bars 80 to be connected. 81,5 70 42 9.30
50

81
165 420 165 210

ø 14 ø7 50

UZ Beam Width Adjustment Bar 129 10,30 065065

Beam width max. 900mm.
Beam width more than 900mm.
2 or more of the Adjustment Bars 129 1453
to be connected. 17x70=1190
81,5 70
42
50

81
310 310 310 310 210

50
ø 14 ø7

UZ Beam Yoke Waler 100 9,02 065058

For bearing one or two Girders GT 24
at each side.

1000
60

120

80 180
40

ø 14

For additional girder support.

Can be mounted either on standard
props or shoring systems.

315
316
10.10 PD 8 Table System

Page Page

018070 Baseplate PD 8 319 018230 Diagonal Brace DK 310, galv. 328

018310 Beam Connector, galv. 323 019280 Diagonal Strut 200, galv. 328
018260 Castor PD 8 320 019270 Diagonal Strut 310, galv. 328
018060 Cotter Pin 4/1, galv. 323 019480 Exit Post, galv. 328
019070 Crane Lifting Unit, Lower Part - PD 8 322 019430 Flight of Stairs PD 8, galv. 329
028570 Crane Lifting Unit, Upper Part 322 018110 Foot Tube FR 80, galv. 327
018630 Cross Head Spindle PD8 20/24, galv. 319 018140 Frame Connector with Washer, galv. 326
018300 Cross Strap, galv. 323 018510 Frame R 150, galv. 326
018150 Diagonal Brace DK 125, galv. 321 018010 Frame R 150, painted 326
019150 Diagonal Brace DK 125/110, galv. 321 019300 Horizontal Strut HS 150, galv. 328
018160 Diagonal Brace DK 150, galv. 321 019330 Horizontal Strut HS 292, galv. 328
019160 Diagonal Brace DK 150/110, galv. 321 019380 Landing Handrail, galv. 329
019210 Diagonal Brace DK 186, galv. 321 019420 Landing PD 8, galv. 329
018170 Diagonal Brace DK 200, galv. 321 018050 Pin Ø 16x 65/86, galv. 326
019170 Diagonal Brace DK 200/110, galv. 321 018270 Quick Jack Nut PD 8, galv. 327
018180 Diagonal Brace DK 250, galv. 321 019560 Ring Screw M 16, galv. 327
019180 Diagonal Brace DK 250/110, galv. 321 019620 Safety Strap for PD 8, galv. 327
018190 Diagonal Brace DK 300, galv. 321 018120 Spindle PD 8 l = 750/400, galv. 326
019190 Diagonal Brace DK 300/110, galv. 321 019410 Stair Handrail, galv. 329
018230 Diagonal Brace DK 310, galv. 321 019540 Stair Tower Stabilizer 140, galv. 327
019220 Diagonal Brace DK 310/110, galv. 321 019550 Stair Tower Stabilizer Special Leng 327
018200 Diagonal Brace DK 350, galv. 321 017070 Swivel Coupling DK 33.7/38, galv. 329
024010 Double Girder Strap DTB, galv. 322 017010 Swivel Coupling DK 48/48, galv. 329
018280 Double Head Nail l=65mm 323 017000 Swivel Coupling DK 60/48, galv. 329
018110 Foot Tube FR 80, galv. 320
018140 Frame Connector with Washer, galv. 318
018520 Frame R 110, galv. 318
018020 Frame R 110, painted 318 10.10
018510 Frame R 150, galv. 318 -
018010 Frame R 150, painted 318 10.30
018290 Framing Clip, galv. 323
024060 Girder Strap TB, galv. 322
019040 Handrail Post PD 8 321
018040 Head Plate PD 8 318
018350 Hex. Bolt ISO 4016 M16x160-4.6, with Nut 323
018050 Pin Ø 16x 65/86, galv. 323
018270 Quick Jack Nut PD 8, galv. 319
018340 Quick Release Spindle, galv. 320
019620 Safety Strap for PD8, galv. 320
026415 Scaffold Tube 48.3x3.2, galv. per m 322
026417 Scaffold Tube Cost per Cut 322
018120 Spindle PD 8 l = 750/400, galv. 319
018030 Spindle PD 8 l =1160/800, galv. 319
017020 Standard Coupling NK 48/48, galv. 322
017030 Standard Coupling NK 60/48, galv. 322
017010 Swivel Coupling DK 48/48, galv. 322
017000 Swivel Coupling DK 60/48, galv. 322
019200 Table Roller with Winch 324
019240 Transportation Wheel 80 324
018610 Yoke Clamp 24, painted 323
018600 Yoke Plate, galv. 322

10.20 PD 8 Shoring Tower

018090 Angle with Nut, galv. 325

019660 Cap Piece, galv. 325
019650 Load Tower Brace LS 165, galv. 325
019640 Load Tower Brace LS 186, galv. 325
019630 Support Ledger PD 8, galv. 325

10.30 PD 8 Stair Tower

German Approval Certificate for
019460 Angle for Stair Tower PD 8, galv. 328
D PD 8 Shoring Tower, No. II B 4-540-122/91.
018070 Baseplate PD 8 326
019570 Connection for Stair Tower Stabilizer, galv. 327 German Approval Certificate for
018060 Cotter Pin 4/1, galv. 326 PD 8 Table System, No. P31-155/84.

317
PD 8 Table Form Accessories
Weight kg Item no.

Frames PD 8
For PD 8 Slabform, Shoring Tower and 1500
Stair Tower.
R 150, galv. 32,80 018510 1100

R 110, galv. 27,20 018520

30

100

200
R 150, painted 32,80 018010 ø 17
R 110, painted 27,20 018020

1500
1100
ø 48

100
ø 60

1500

1100

30

100

200
ø 17

1100
700
ø 48

100
ø 60

Frame Connector with Washer, galv. 0,54 018140

To connect frames R 150 and R 110.
3

160
63

ø 20

ø 48
ø 70

Accessories:
Pin ø 16x65/86, galv. (2x) 0,17 018050
Cotter Pin 4/1, galv. (2x) 0,03 018060

Head Plate 3,76 018040

220
With Cap Piece, galv. it can be
tilted 1.2° in any direction. 170
110 14 40
17,5
110
160

ø 20

ø 11 ø 20
12
60

Accessories:
Pin ø 16x65/86, galv. (1x) 0,17 018050 62

Cotter Pin 4/1, galv. (1x) 0,03 018060

318
 Weight kg Item no.

Base Plate PD 8 2,10 018070

For spindles PD 8, galv. and
ø 32
Foot Tube FR 80, galv.
ø 17 ø 11

80
30
ø 20

10
110

150
Accessories:
Pin ø 16x65/86, galv. (1x) 0,17 018050
Cotter Pin 4/1, galv. (1x) 0,03 018060

Spindle PD 8 L = 1160/800, galv. 6,80 018030

For use as head and base spindle for
PD 8 Tableform and Stair Tower.
Spindle PD 8 L = 750/400, galv. 4,40 018120
For use as head and base spindle for PD 8
Tableform, Shoring Tower and Stair Tower.

1160
10.10
-

910
10.30

750
500
ø 17 ø 17
30

30
Tr 48 x 10 Tr 48 x 10

Accessories:
Quick Jack Nut PD 8, galv. 0,80 018270

Cross Head Spindle PD 8 20/24, galv. 8,87 018630

For use as head spindle for PD 8 Tableform.
Maximum spindle extension 465mm. ø6
Complete with:
quick jack nut PD 8, galv.
168
195
10

20
max
465

240

170
955

Tr 48 x 10
155

85

ø 25

Quick Jack Nut PD 8, galv. 0,80 018270

For Spindle, and Cross Head Spindle PD 8. ø 62
35

16
76

30

Tr 48 x 10 200

319
 Weight kg Item no.

Foot Tube FR 80, galv. 5,40 018110

Head and base tube for PD 8 Tableform
and Stair Tower. Can be used with
Quick Release Spindle, galv.

8x100 = 800
1060
ø 17

60
30
ø 48
Accessories:
Pin ø 16x65/86, galv. (1x) 0,17 018050
Cotter Pin 4/1, galv. (1x) 0,03 018060

Quick Release Spindle, galv. 4,16 018340

For PD 8 Tableform.
In conjunction with Foot Tube FR80, galv.
Complete with:
M16x80
Locking pin (1x) and
Quick Jack Nut PD 8 (1x).
185
Adjustment range

415

35
230
150

ø 16
30

18 Tr 60x12

Castor PD 8 6,05 018260 298

To move PD 8 Tableforms.
13
24

Fixed to Base Plate PD 8.

80
102

ø 155
157
ø 24
25
152

125
74

Load capacity: 250kg.

Safety Strap for PD 8, galv. 0,22 019620

To secure spindles PD 8 into the Frames R. 60 20
225
27

32

Load capacity: 300kg.

320
 Weight kg Item no.

Diagonal Brace DK, galv.

For PD 8 Tableform.
Diagonal Brace L A B
Combination of Frames R 150-R 150 or
R 150-R 110 Diagonal Brace 125 1665 1100 1250
DK 125 6,91 018150
DK 150 7,71 018160 Diagonal Brace 150 1860 1100 1500
DK 186 8,91 019210
DK 200 9,31 018170 Diagonal Brace 186 2161 1100 1860
DK 250 11,30 018180 Diagonal Brace 200 2282 1100 2000
DK 300 13,30 018190
DK 310 13,50 018230 Diagonal Brace 250 2731 1100 2500
DK 350 15,10 018200
For PD 8 Tableform. Diagonal Brace 300 3195 1100 3000
Combination of Frames R 110-R 110
Diagonal Brace 310 3289 1100 3100
DK 125/110 5,71 019150
DK 150/110 6,91 019160 Diagonal Brace 350 3668 1100 3500
DK 200/110 8,71 019170
DK 250/110 10,70 019180
DK 300/110 12,70 019190 Diagonal Brace L A B
DK 310/110 13,10 019220
Diagonal Brace 125/110 1433 700 1250

Diagonal Brace 150/110 1655 700 1500

Diagonal Brace 200/110 2118 700 2000

Diagonal Brace 250/110 2596 700 2500

Diagonal Brace 300/110 3080 700 3000

Diagonal Brace 310/110 3178 700 3100 10.10

-
10.30

ø 34 L
A

46
Handrail Post PD 8 6,56 019040
For screwing on plywood, ø7
girders or timbers.
120

ø 48
560
1250

ø 10
560

100
80

120

150

321
 Weight kg Item no.

Crane Lifting Unit

Consisting of:
Lifting Unit, Upper Part 3,51 028570
Observe operating instructions! 255

Lifting device to BGR 500 ø 50

Permissible load: 500kg

400
Lifting Unit,
Lower Part PD 8 1,24 019070
Complete with:
Pin ø 16x65/86 and B15

Cotter Pin 4/1 (2x)

Load-bearing point
Permissible load: 500kg

Girder Strap TB, galv. 0,10 024060

Double Girder Strap DTB, galv. 0,34 024010
For tightening primary beams

90
on Head Plate PD 8.

30
Complete with:
110
Nut M8, galv., and washer M8 SW 13
A 8,4 DIN 125, galv. (2x). or (4x)
138

96
SW 13

30
118 M8 110

Scaffold Tube 48.3x3.2, galv. 3,55/m 026415

Scaffold Tube cutting costs 026417

Standard Coupling NK, galv.

NK 48/48, galv. 1,12 017020
NK 60/48, galv. 1,40 017030

Width across flats 19mm.

Swivel Coupling DK, galv.

DK 48/48, galv. 1,40 017010
DK 60/48, galv. 1,54 017000

Width across flats 19mm.

Yoke Plate, galv. 1,20 018600

300 10
25 25 25 55 55 25 25 25
60

ø 20

322
 Weight kg Item no.
B 15
Yoke Clamp 24 0,55 018610

331
25
57

Pin ø 16x65/86, galv. 0,17 018050

For connection of Base Plate, Head Plate, 110
88
Frame Connector with Washer and Foot
67 5
Tube.

ø 16

ø 25
ø 5,5

Cotter Pin 4/1, galv. 0,03 018060

For Pins up to ø 25mm.

ø4
Cross Strap, galv. 0,54 018300
For connecting Steel Waler SRZ
onto Head Plate PD 8. 10.10
-
150 10 10.30

50
ø 20
Accessories:
Hex. Bolt ISO 4016 M16x160-4.6, galv. MU 0,31 018350

221 62
Beam Connector, galv. 1,80 018310
For connecting perpendicular girders or timbers.
min. 200 - max. 280

Complete with:
Captive Wingnuts (2x).
320

174
Rd 12 x 1/10"
50

214

Framing Clip, galv. 0,10 018290

For connecting perpendicular girders or timbers.
185

ø 4,8
98

36

Double Headed Nail L = 65mm 1,00 018280

Delivered in packs of: 5 kg 75
10

ø 3,1

323
 Weight kg Item no.

Trolley with Winch 188,00 019200

To move PD 8 Tableforms, Shoring Towers, 54
Stair Towers and MULTIPROP Tableforms.
Observe operating instructions!

max 2635 MULTIPROP

max 2135 MULTIPROP

max 1635 MULTIPROP

1180

1120
600
676

max 1105 PD 8

max 855 PD 8
758
➀ ➁ ➂ ➃ ➄

1500
min 1335

min 835

min 335

min 305

Lifting appliance to BGV D8

min 55

360
Permissible load: 1000kg
➀ ➁ ➂ ➃ ➄
Spare Part:
Winch for Trolley 22,00 019140

Transportation Wheel 80 52,40 019240

107

Alternative to Trolley with Winch to move

PD 8 Tableforms.
Adjusting range: 400mm
For fitting to scaffold tube ø 60mm.
23
967

Observe operating instructions!

200
200
467

400

102
max. 735 23

315
min. 335

ø 250

75

670

Lifting appliance to BGV D8

Permissible load: 600kg

324
PD 8 Shoring Tower Accessories
Weight kg Item no.

Load Tower Brace, galv.

The Load Tower Brace 186 can also
be used horizontally.
LS 186, galv. for frame R 150 4,46 019640
LS 165, galv. for frame R 110 3,96 019650

ø 34

33
1860/1655
ø 28

Reinforcing Support PD8, galv. 11,10 019630

For PD 8 Shoring Tower.
2 at the top and the bottom.
ø 70
ø 70

8 80
ø 60

1500

10.10
-
10.30

Cap Piece, galv. 0,34 019660

For concentrical load transfer at PD 8 ø 50
Shoring Tower. Allows tilting of Head Plate. ø 32

16
65
55

28

18 18
30

Screw-On Locking Angle ASW, galv. 0,25 018090

For centering Steel Walers SRZ
profile U100 and U120 on the Head Plate
when using PD 8 Shoring Tower.
2 per Head Plate. 80 40
60 10
Complete with:
Hex. Nut ISO 4032 M16-8, galv. (1x).
30 40
25

ø4
ø9
M16

325
PD 8 Stair Tower Accessories
Weight kg Item no.

Frames PD 8
For PD 8 Slabform, Shoring Tower and 1500
Stair Tower. 1100
R 150, galv. 32,80 018510

30
R 150, paint. 32,80 018010

100

200
ø 17

1500
1100
ø 48

100
ø 60

Frame Connector with Washer, galv. 0,54 018140

To connect frames R 150 and R 110.

160
63
ø 20

ø 48

ø 70
Accessories:
Pin ø 16x65/86, galv. (2x) 0,17 018050
Cotter Pin 4/1, galv. (2x) 0,03 018060

Spindle PD 8 L = 750/400, galv. 4,40 018120

For use as head and base spindle for PD 8
Tableform, Shoring Tower and Stair Tower.
750
500

ø 17
30

Tr 48x10

Accessories:
Quick Jack Nut PD 8, galv. 0,80 018270

Base Plate PD 8 2,10 018070

For spindles PD 8, galv. and
Foot Tube FR 80, galv.
ø 32

ø 17 ø 11
80
30

ø 20
10

110

150
Accessories:
Pin ø 16x65/86, galv. (1x) 0,20 018050
Cotter Pin 4/1, galv. (1x) 0,03 018060

326
 Weight kg Item no.

Quick Jack Nut PD 8, galv. 0,80 018270

For Spindle, and Cross Head Spindle PD 8. ø 62

35

16
76

30
Tr 48x10 200

Safety Strap for PD 8, galv. 0,22 019620

To secure spindles PD 8 into the Frames R. 60 20

225
27
32

Load capacity: 300kg.

Foot Tube FR 80, galv. 5,40 018110

Head and base tube for PD 8 Tableform
and Stair Tower. Can be used with
Quick Release Spindle, galv.

10.10

8x100 = 800
-

1060
10.30

ø 17

60
Accessories:
Pin ø 16x65/86, galv. (1x) 0,20 018050
30

ø 48
Cotter Pin 4/1, galv. (1x) 0,03 018060

Stair Tower Stabilizer 140, galv. 5,74 019540

Stair Tower Stabilizer Special Length 4,32/m 019550
Scaffold Tube ø 48,3x3,2 ø 24
95

1400
50

Connection for Stair Tower Stabilizer, 2,49 019570 ø 48

galv.
20

48
200
243

Stair Tower Eye Bolt M16, galv. 0,28 019560

ø 63 14
Anchoring with dowels M16.
ø 35

62
27

M16 ø 35

327
 Weight kg Item no.

Diagonal Strut DS, galv.

DS 200 DS 310 HS 150 HS 292
Horizontal Strut HS, galv.
For PD 8 Stair Tower. L 2282 3289 1500 2926
DS 200, galv. 5,10 019280
DS 310, galv. 7,20 019270 ø 34 34 34 38

HS 150, galv. 3,43 019300

HS 292, galv. 5,40 019330

8
30 L

45

ø
ø 22

Diagonal Brace DK 310, galv. 13,50 018230

For PD 8 Stair Tower.

328
9
ø 22
1100

ø 34

SW 19

3100

Exit Post, galv. 5,50 019480

For PD 8 Stair Tower.
ø 34

ø 20
2300

450
450
200

Return Angle for Stair Tower, galv. 3,68 019460

For PD 8 Stair Tower. 52 52
50
250

383

ø 25
250

ø 20
1200
433
200
250

384
250

50

328
 Weight kg Item no.

Landing Handrail, galv. 6,77 019380

For PD 8 Stair Tower.
Stair Handrail, galv. 8,40 019410
For PD 8 Stair Tower.
1100

ø 34

5
32
ø 27

1085

1435
655
ø 34

100

783
620

32
Stair Tower Landing -Steel Grating, galv. 25,90 019420

80
For PD 8 Stair Tower.

55
850
40 748
32

40
10.10
-
660
580
10.30

40
620

Flight of Stairs -Steel Grating, galv. 85,70 019430

For PD 8 Stair Tower.
660

580

2985

504 1100

265
188
1306

660

2926
Riser ratio 18,8 : 26,5.

Swivel Coupling DK

DK 48/48, galv. 1,40 017010

DK 60/48, galv. 1,54 017000
DK 33,7/38, galv. 1,10 017070

Width across flats 19mm.

329
330
11.10 ST 100 Stacking Tower

Page

019790 Adj. Cross Head Spindle TR 38 -70/50, galv. 333

019900 Base-Head Frame ST 100, galv. 332
019780 Base Spindle TR 38-70/50, galv. 333
019810 Connector ST 100, galv. 334
019950 Cross Head Spindle TR 38-70/50, galv. 333
019940 Diagonal Strut ST 100, galv. 332
019930 End Frame ST 100, galv. 334
019920 End Waler ST 100, galv. 334
106092 Industrial Deck UDI 25x100 334
065050 Pallet ST 100/2, galv. 335
026415 Scaffold Tube 48.3x3.2, galv. per m 335
026417 Scaffold Tube Cost per Cut 335
026411 Scaffold Tube, Steel 48.3x3.2, galv. l=1.0m 335
026412 Scaffold Tube, Steel 48.3x3.2, galv. l=2.0m 335
026413 Scaffold Tube, Steel 48.3x3.2, galv. l=3.0m 335
026414 Scaffold Tube, Steel 48.3x3.2, galv. l=4.0m 335
026419 Scaffold Tube, Steel 48.3x3.2, galv. l=5.0m 335
026418 Scaffold Tube, Steel 48.3x3.2, galv. l=6.0m 335
019800 Spindle Safety Strap ST 100, galv. 335
019910 Stacking Frame ST 100, galv. 332
017020 Standard Coupling NK 48/48, galv. 335
017010 Swivel Coupling DK 48/48, galv. 335

11.10

German Approval Certificate for

D ST 100 Stacking Tower, No. II B 3-543-236.

331
ST 100 Stacking Tower
Weight kg Item no.

Base-Head Frame ST 100, galv. 17,00 019900 ø 48

To be used as base and head frame.
ø 22

450

330
80
125 125

1000
1000

Stacking Frame ST 100, galv. 6,93 019910

4 required per metre rise.

ø 48
ø 22

250
500

738
250

125 125

1000

Diagonal Brace ST 100, galv. 2,28 019940

The number required depends on the
static system.
Also to be used with the end frame ST 100.

1250

1300

ø 34

332
 Weight kg Item no.

Base Spindle TR 38-70/50, galv. 5,17 019780

Complete with: ø 38
captive wing nut

(spindle) adjustment range min 47

700

max. 535
30
140

150 80
ø 21
ø 19

100
ø 14

10
ø 10

Accessories:
Safety Strap for ST 100, galv. 0,065 019800

Adjustable Crosshead Spindle 6,75 019790

TR 38-70/50, galv.
Complete with: 170 37,5 85 37,5
ø 13
captive wing nut

11 60

(spindle) adjustment range min 51

max. 535
11.10
30
700

150
190

Maximum tilt of forkhead 10 ø 19

= 2,5° in any direction. ø 14
ø 10

80
160
ø 21

ø 38 110

Accessories:
Safety Strap for ST 100, galv. 0,065 019800

Crosshead Spindle TR 38-70/50, galv. 7,74 019950

Complete with: ø 6,5
captive wing nut
Providing stable support for single
or twin GT 24 or VT 20K Girders.
168
195

20
12

(spindle) adjustment range min 47

max. 535
30
700

150 240

170
155
85

ø 38

Accessories:
Safety Strap for ST 100, galv. 0,065 019800

333
 Weight kg Item no.
ø 48
End Frame ST 100, galv. 5,39 019930 ø 22
To be used together with End Waler ST 100

80
to form Base Frame, if the standard
Head-Base Frame cannot be used.

330

250

450
125

125
1000

2 at the top and bottom

End Waler ST 100, galv. 6,24 019920

To brace the End Frames ST 100
Including Clamping Wedge (2x)

208
60

1000
90

2 at the top and bottom

Connector ST 100, galv. 1,08 019810

For adding 2 vertical legs to ST 100 Towers.
Required where heavy point loads are
to be supported. 250 30
30
78

50

2 required per metre rise

Industrial Deck UDI 25x100 6,73 106092

1000 245
95

950
245

1042

334
 Weight kg Item no.

Pallet ST 100/2, galv. 124,00 065050 ! Important safety note!

For easy transporting of PERI When stacking light, large surface
ST 100 Stacking Tower components. items outdoors the maximum
Capacity: stacking height must be reduced.
84 Stacking Frames
+ Base and Head Spindles
2480
+ Diagonal Struts
2280
Observe operating instructions!

400

970
140
1350

1100
900

70
40

Lifting device to BGR 500

Permissible load: 1000kg

11.10
Safety Strap Spindle ST 100, galv. 0,065 019800
To secure Base and Head Spindles
into the Frames.

150
75

Scaffold Tube Steel 48,3x3,2 L = 1,0m 3,55 026411

L = 2,0m 7,10 026412
L = 3,0m 10,65 026413
L = 4,0m 14,20 026414
L = 5,0m 17,75 026419
L = 6,0m 21,60 026418
Special Length 3,55/m 026415
Cutting Costs for Scaffold Tubes 026417

Standard Coupling NK 48/48, galv. 1,12 017020

Width across flats 19mm.

Swivel Coupling DK 48/48, galv. 1,40 017010

Width across flats 19mm.

335
336
12.10 MULTIPROP 12.40 RS and RSS Push-Pull-Props

Page Page

079300 Alu Beam MPB 24 l=3.00m 342 103606 Anchor Bolt PERI MMS 20x130 348
079360 Alu Beam MPB 24 l=3.60m 342 028100 Base Plate for RS 349
079420 Alu Beam MPB 24 l=4.20m 342 028900 Base Plate for RS 1000/1400, galv. 350
079480 Alu Beam MPB 24 l=4.80m 342 102018 Base Plate-2 for RS 1000/1400, galv. 350
079540 Alu Beam MPB 24 l=5.40m 342 106000 Base Plate-2 for RSS 348
079600 Alu Beam MPB 24 l=6.00m 342 028110 Kicker AV 348
108286 Assembly Bolt MPB 24 with Nut 342 108135 Kicker AV 210 348
107820 Assembly Plate MPB 24 342 028120 Kicker AV for RSS III 349
027310 Base MP 50 338 028990 Push-Pull Prop RS 1000, galv. 350
108213 Brace Connector MPB 24 343 103800 Push-Pull Prop RS 1400, galv. 350
107161 Compression Brace Head MP/SRU 343 028210 Push-Pull Prop RS I 349
027304 Connection Bolt MP, with Nut 340 028220 Push-Pull Prop RS II 349
107160 Connector MP-SRU 343 028010 Push-Pull Prop RSS I 348
027301 Connector MPV-2 340 028020 Push-Pull Prop RSS II 348
018060 Cotter Pin 4/1, galv. 343 028030 Push-Pull Prop RSS III 349
104031 Filler Pin Ø 21x120 343
Frames MRK 339
027288 MULTIPROP MP 120 335
027289 MULTIPROP MP 250 338
027290 MULTIPROP MP 350 338
027291 MULTIPROP MP 480 338
027305 MULTIPROP MP 625 338
027302 MULTIPROP Strap SRZ U100 - U140 341
108339 Quick Strap MPB 24 342
027298 Scaffold Tube Coupler MG-A/C 341
027299 Scaffold Tube Coupler MG-B/D 341
107348 Splice MPB 24 342
027296 Tilting Base MKF 340
027297 Tilting Forkhead MKK 340
028000 Universal Tripod, galv. 341
022027 Wing Nut Spanner HD 340

12.30 PEP 10, PEP 20

PEP 30, Props 12.10
-
12.40
027940 Brace Clamp, galv. 347
106989 Crosshead PEP 10 / VT 20 344
106434 Prop PEP 10-250 A 344
106433 Prop PEP 10-300 A 344
106432 Prop PEP 10-350 A 344
106429 Prop PEP 10-400 A 344
028760 Prop PEP 20 G 410 346
028730 Prop PEP 20 N 260 346
028740 Prop PEP 20 N 300 346
028750 Prop PEP 20 N 350 346
103058 Prop PEP 20-300 345
103059 Prop PEP 20-350 345
103060 Prop PEP 20-400 345
103061 Prop PEP 20-500 345
028770 Prop PEP 30 G 300 346
028780 Prop PEP 30 G 350 346
103066 Prop PEP 30-150 345
103067 Prop PEP 30-250 345 German Approval Certificate for
103062 Prop PEP 30-300 345
D RSS I and RSS II, No. P31-23/83.
103063 Prop PEP 30-350 345
103065 Prop PEP 30-400 345 German Approval Certificate for
107152 Tripod PEP 10 344 RS 1000, No. P31-137/90.
027860 Tripod, galv. 347
028000 Universal Tripod, galv. 347 German Approval Certificate for MP 250, 350
and 480 as single prop, No. S-N 970063.

German Approval Certificate for

MULTIPROP System, No. S-N 960351.

German Approval Certificate for

PEP 20 and PEP 30, No. S-N 010106.

German Approval Certificate for

PEP N and G, No. S-N 990578.

337
MULTIPROP and Accessories
Weight kg Item no.

MULTIPROP MP, Alu

Can be used individually, as well as in
combination with MULTIPROP MRK Frames
tableforms or shoring towers.

MULTIPROP MP 120 10,40 027288

75
10
(0,80-1,20m)
MULTIPROP MP 250 15,00 027289
(1,45-2,50m)
MULTIPROP MP 350 18,80 027290 ø 17

(1,95-3,50m) End Plate

MULTIPROP MP 480 23,80 027291
(2,60-4,80m)
MULTIPROP MP 625 33,60 027305

120
150

80
64
(4,30–6,25m) ø 40

ø 14

B
64
80
120
150

Section

L min – L max
64

0
10
87
L min. L max. A B
MP 120 800 1200 715 421
MP 250 1450 2500 1365 1071
A

MP 350 1950 3500 1865 1571

MP 480 2600 4800 2515 2221
MP 625 4300 6250 4211 1975

ø 17
75
10

Base MP 50 8,81 027310

With quick action clamp coupling.

150
500

ø12,5
200
80

ø42
For mounting props
with 6 to 10mm thick ø 89
end plates.

338
 Weight kg Item no.

Frames MRK
Complete with:
Wedge Coupling for
connecting to MULTIPROP.

500
I (overall length for loading)

L (Centre MULTIPROP)

L [mm] l [mm]
Frames (steel)
MRK 62,5 9,73 028390 625 545
MRK 75,0 9,90 028400 750 670
MRK 90,0 11,20 028330 900 820
MRK 120,0 13,80 028340 1200 1120
MRK 137,5 15,20 028380 1375 1295
MRK 150,0 16,10 028350 1500 1420

Frames (alu)
MRK 201,5 11,20 028460 2015 1935
MRK 225,0 12,10 028360 2250 2170
MRK 230,0 12,30 028470 2300 2220
MRK 237,0 12,50 028480 2370 2290
MRK 266,0 13,60 028490 2660 2580
MRK 296,0 14,60 028370 2960 2880

12.10
MRK 62,5 MRK 75 MRK 90 MRK 120 MRK 137,5 MRK 150 -
12.40

MRK 201,5 MRK 225 MRK 230 MRK 237

MRK 266 MRK 296

339
 Weight kg Item no.

Tilting Forkhead MKK 8,32 027297

With quick action clamp coupling.
Can be tilted 3° in any direction. Providing
stable support for single or twin GT 24 or
VT 20K Girders. Minimum girder lap on both
ø7
sides 150mm. For use with Frames MRK.

240

170 150

195

444
80
155

85

max 220
min 120
ø12,5

Tilting Base MKF 5,68 027296

ø 38
With quick action clamp coupling.
Can be tilted 3° in any direction. 150
For the use with frames.

ø 12,5

max 220
min 120
80

140

ø 12
Connector MPV-2 1,00 027301
Alu, powder-coated.
For connecting 2 MULTIPROPs

25
60

with 10mm thick end plates.

For the use with frames.

100 80

Alternative:
Connection with 2 pieces
Connecting Bolt MP, with Nut 0,07 027304

8 12
Connecting Bolt MP, with Nut 0,07 027304
M12
26

48 SW19

985
Wing Nut Spanner HD 4,23 022027
Makes it easy to undo the adjusting nuts.
135

ø 48

340
 Weight kg Item no.

Universal Tripod, galv. 9,26 028000

For props ø 48 to ø 120mm.
Can also be used in combination
with MULTIPROP Base MP 50.

853

800
555
357
ø 48 – 120

Only to be used as an erection device.

Scaffold Tube Coupling MG-A/C 1,91 027298

Scaffold Tube Coupling MG-B/D 1,91 027299
For diagonal bracing with tubes ø 48mm.

MG-B/D MG-A/C

12.10

95
95

-
12.40

70 70

MG-B/D MG-A/C

Only to be used as an erection device!

MULTIPROP Strap SRZ U100 - U140 2,10 027302

For mounting steelwaler SRZ
U100 – U140 on MULTIPROP´s.

250

200

U140
220

50

U100

Width across flats 24mm.

341
MULTIPROP Accessories
Weight kg Item no.

Alu Beam MPB 24

Main beam for the MULTIPROP system. 80

240
2998 / 3598 / 4198 / 4798 / 5398 / 5998

MPB 24 - 300 24,00 079300

MPB 24 - 360 28,80 079360
MPB 24 - 420 33,70 079420
MPB 24 - 480 38,50 079480
MPB 24 - 540 43,30 079540
MPB 24 - 600 48,10 079600

Splice MPB 24 9,53 107348

For connecting the Alu Beams MPB 24.

950 48

129
ø 21

Accessories:
Bolt ø 20x140, galv. (4x) 0,328 105400
Cotter Pin 4/1 (4x) 0,030 018060

Quick Strap MPB 24 / GT 24 0,203 108339

For connecting Girders GT 24 67 70
to the Alu Beams MPB 24.
68
78

ø7

ø5

Accessories:
Double Head Nail 1,00 018280

Assembly Plate MPB 24 0,085 107820

For connecting Alu Beams MPB 24
to MULTIPROP props or connecting 52
Girders GT 24 to Alu Beams MPB 24.
Always use in pairs!
11

ø 13

ø 8,5
70

Accessories:
Assembly Bolt MPB 24 with Nut 0,060 108286

34 18
Assembly Bolt MPB 24 with Nut 0,060 108286
For attaching accessories to
Alu Beams MPB 24.
50

M 12

342
 Weight kg Item no.

Brace Connector MPB 24 2,59 108213 205 14

For connecting push-pull props or tension
ø 16
anchoring to Alu Beam MPB 24.

161
267
ø 22

34 100
ø 13

Accessories:

120
Bolt ø 20x140, galv. 0,328 105400
Cotter Pin 4/1 0,030 018060

Bolt ø 20x140, galv. 0,328 105400

For connecting Alu Beams MPB 24 or
mounting Prop Connector MPB 24.
ø8

20,2

20,5
100
135

Accessories:
Cotter Pin 4/1 0,030 018060

Compression Brace Head MP/SRU 2,60 107161

For assembly on MULTIPROP shoring towers
or individual props for use in inclined brackets.
12.10
-
240

12.40

120
120

Accessories:
Assembly Bolt MPB 24 with Nut (2x) 0,060 108286
Bolt ø 20x140, galv. (1x) 0,328 105400
Cotter Pin 4/1 (1x) 0,030 018060

Connector MP/SRU 3,79 107160

For variable connection of the Compression
Brace Head MP/SRU to the Steel Waler SRU.

325 70
48

Accessories:
126

Bolt ø 20x140, galv. (4x) 0,328 105400 ø 23

Cotter Pin 4/1(4x) 0,030 107348 ø 21 52

343
PEP 10 A Props and Accessories
Weight kg Item no.

Slab props PEP 10 A, galv.

PEP 10-250 A L = 1,47-2,50m 10,50 106434

PEP 10-300 A L = 1,72-3,00m 11,80 106433
PEP 10-350 A L = 1,97-3,50m 14,00 106432 Head plate

100 97
PEP 10-400 A L = 2,22-4,00m 15,50 106429
ø 14 ø 30

ˆ 120
ˆ 80
ø5

Base plate
ø 40

L max

Crosshead PEP 10 / VT 20, galv. 1,42 106989 252

With self-locking mechanism. 1 VT 20
Providing stable support for single
or twin VT 20K girders.
153

2 VT 20
180

Tripod PEP 10, galv. 5,40 107152

For PEP 10 slab props Ø 44-64mm

Only to be used as an erection device!

344
PEP 20, PEP 30 Props
Weight kg Item no.

Props PEP 20, galv.

6
End Plate

84
PEP 20-300 L = 1,71-3,00m 15,70 103058
PEP 20-350 L = 1,96-3,50m 19,20 103059

B
ø 14
PEP 20-400 L = 2,21-4,00m 22,70 103060

100
PEP 20-500 L = 2,71-5,00m 30,50 103061 ø9

40
80

D2
100

120

A
D1

20-300 20-350 20-400 20-500

A 1602 1852 2102 2602
B 143 93 143 143
D1 ø 66.0 ø 71.5 ø 75.5 ø 84.0
For load capacity refer to
D2 ø 54.0 ø 59.5 ø 63.5 ø 72.0
PERI Formwork Design Tables.
12.10
-
Props PEP 30, galv. 12.40
8

End Plate
82

PEP 30-150 L = 0,96-1,50m 10,40 103066

PEP 30-250 L = 1,46-2,50m 15,00 103067
B

ø 14
PEP 30-300 L = 1,71-3,00m 18,70 103062
100

PEP 30-350 L = 1,96-3,50m 22,70 103063 ø9

PEP 30-400 L = 2,21-4,00m 27,20 103065 40

80

D2
100

120
L

D1
A

30-150 30-250 30-300 30-350 30-400

A 852 1352 1602 1852 2102
B 93 93 143 93 143
For load capacity refer to D1 ø 66.0 ø 66.0 ø 71.5 ø 75.5 ø 84.0
PERI Formwork Design Tables. D2 ø 54.0 ø 54.0 ø 59.5 ø 63.5 ø 72.0

345
PEP N, PEP G Props Manufacture of items shown on this
page has been discontinued. These
Weight kg Item no. items are only available from rental stock.

Props PEP 20 N and G, galv.

PEP 20 N 260 L = 1,51-2,60m 15,10 028730

PEP 20 N 300 L = 1,71-3,00m 16,60 028740
PEP 20 N 350 L = 1,96-3,50m 19,90 028750 Head plate
N 260, 300, 350 G 410
PEP 20 G 410 L = 2,26-4,10m 25,20 028760 ø 13 ø 13

8
84
ø9 ø9

B
100
120 140

Head plate
N 260, 300, 350 G 410
ø 13 ø 13
ø9 ø9

E
L max
L min
120 140

D N 260 N 300 N 350 G 410

L min 1508 1708 1958 2258
L max 2600 3000 3500 4100
A 1400 1600 1850 2150
B 140 140 90 90
C ø 52 ø 52 ø 58 ø 62,2
D ø 63,5 ø 63,5 ø 70 ø 76,1
For load capacity refer to E ø 54 ø 54 ø 60 ø 66
PERI Formwork Design Tables.

Props PEP 30 G, galv.

PEP 30 G 300 L = 1,71-3,00m 20,30 028770 Head plate

PEP 30 G 350 L = 1,96-3,50m 24,50 028780 ø 13
8
82

ø9
B
100

150

ø 62,2

Foot plate
ø 13
ø9
L max
L min

140
A

ø 76,1

G 300 G 350
L min 1708 1958
L max 3000 3500
A 1600 1850
For load capacity refer to B 140 90
PERI Formwork Design Tables.

346
 Weight kg Item no.

Universal Tripod, galv. 9,26 028000

For props ø 48 to ø 120mm.
Can also be used in combination
with MULTIPROP Base MP 50.

853

800
555
357
ø 48 – 120

Only to be used as an erection device!

Tripod, galv.* 8,98 027860

For props ø 57 to ø 89mm.

780

615
*for hire only 840 585

Only to be used as an erection device!

Brace Clamp, galv. 1,85 027940

12.10
Diameter of prop ø 48 up to 76mm.
-
12.40
min ø 48
max ø 76
Board max 30
186

40 210
400

Size of bracing board 30x150mm.

347
RS, RSS Push-Pull Props and Accessories
Weight kg Item no.

Push-Pull Props RSS I L = 2,05-2,94m 18,00 028010

Push-Pull Props RSS II L = 2,91-3,80m 22,40 028020
For load capacity see PERI Design Tables.

RSS I min 2050-max 2940

RSS II min 2910-max 3800

36
71
40 RSS I 1915 ø 16
RSS II 2775
ø 16

10
15

ø 70
Base Plate-2 for RSS, galv. 1,81 106000
Base Plate for RSS* 1,60 028090 60 ø 11 ø 21 ø 11 ø 11
Complete with: 65
ø 21
Pin ø 16x65/86 and Cotter Pin 4/1 (1x).

100

100
80

60
10

10
67

12
30 70 30 40 65 20
150
*for hire only

Kicker Brace AV L = 1,08-1,40m 5,17 028110

Complete with:
Pin ø 16x42 and Cotter Pin 4/1 (1x).
For load capacity see PERI Design Tables. min 1080-max 1400

134

40
ø 16x42 ø 16
FS 4/1 980
10

ø 38

Kicker Brace AV 210 L = 1,28-2,10m 13,00 108135

Kicker Brace AV 190* L = 1,08-1,90m 11,90 028270
Complete with: min 1280-max 2100
Pin ø 16x42 and Cotter Pin 4/1 (1x). min 1080-max 1900
For load capacity see PERI Design Tables.
36

ø 16x42 971 ø 16
FS 4/1
10

ø 70

*for hire only

Anchor Bolt PERI MMS 20x130 0,33 103606

For erecting props etc. without plugs. SW 30
Can be used several times.
Drill depth
min 140
130

Use 18mm drill to

20
DIN 8035 !

348
 Weight kg Item no.

Push-Pull Prop RSS III L = 4,60-6,00m 38,40 028030

For load capacity see PERI Design Tables.

min 4600-max 6000

48
71

41 4434
ø 16
ø 16
15

10
ø 83

Kicker Brace AV RSS III L = 2,03-2,92m 16,90 028120

Complete with:
Pin ø 16x42 and Cotter Pin 4/1 (1x).
For load capacity see PERI Design Tables.

min 2030
max 2920 12.10
-

40
12.40
ø 16x42 1915 ø 16
FS 4/1
ø 70

10
Push-Pull Props RS I L = 1,84-2,94m 13,00 028210
Push-Pull Props RS II L = 2,56-4,06m 16,80 028220
For load capacity see PERI Design Tables.
RS I min 1840-max 2940
RS II min 2560-max 4060

100
ø 16
57

48
12

Base Plate for RS 1,86 028100

Complete with: 60
ø 13 ø 21
Pin ø 16x65/86 and Cotter pin 4/1 (1x). ø 21
80

90

60
65

10

40 40 55 30 25
150

349
 Weight kg Item no.

Push-Pull Prop RS 1000, galv. 116,00 028990

L = 6,40-10,00m
For load capacity see PERI Design Tables.

Pin ø 18 ø 21

ø 102
ø 89
ø 21 ø 17
48

d = 10mm
19x100=1900 19x100=1900
min 90 min 60 6000 min 60 min 115
max 240 max 1760 max 1760 max 240
min 6325-max 10000

Push-Pull Prop RS 1400, galv. 271,00 103800

L = 6,40m-14,00m
Complete with:
Chain sling 1400 and
Pin ø 25mm, galv. (Item no.: 104220) 2x
Cotter Pin 4/1, galv. (Item no.: 018060) 2x
Chain can be removed from the floor!
For load capacity see PERI Design Tables.
6288

466 466 65

Suspension points
ø 21 for site transport ø 21 ø 17
Chain in
transport position

20x200=4000 20x200=4000
Stacking aids

min 6400-max 14000 (transport size 6290)

Base Plate-2 for RS 1000/1400, galv. 4,91 102018 ø 20x140

Base Plate for RS 1000/1400, galv.* 4,62 028900

Complete with:
108
78

Pin ø 20 and Cotter Pin 4/1 (2x).

120 30 52
190 25

ø 21
114

*for hire only 293 ø 21

350
 12.10
-
12.40

351
352
13.10 SB Brace Frame

Page Page

027680 Adapter SB-1,2 - TRIO/DOMINO 358 031590 V-Tie Holder DW 20 364

027480 Anchor Plate SB-DW 26 363 031600 V-Tie Holder DW 26 364
027650 Anchor Waler U140, l=0.55m 363 025760 Waler Connector SB-A,B,C 356
027530 Anchor Waler U140, l=2.35m 363 024250 Wedge K, galv. 356
102018 Base Plate-2 for RS 1000/1400, galv. 359 030100 Wingnut DW 15, galv. 360
106662 Brace Frame Adaptor SB A0,A,B 366 030990 Wingnut DW 20, galv. 361
030060 Brace Frame Double Anchor DW 15 360
027500 Brace Frame SB 1 357
027510 Brace Frame SB 2 357
106661 Brace Frame SB Mounting Shoe 366
025700 Brace Frame SB-A 355
025690 Brace Frame SB-A0 354
025710 Brace Frame SB-B 355
025720 Brace Frame SB-C 354
024180 Compensation Washer 20, galv. 359
025740 Connector SB-A,B,C - TRIO/DOMINO 356
030830 Counterplate DW 20, 120x120x20 361
030400 Coupling Nut M 30/DW 26, galv. 363
030050 Cutting Cost Tie Rod DW 15 / B 15 360
030800 Cutting Cost Tie Rod DW 20 361
030500 Cutting Cost Tie Rod DW 26 362
027520 Double Anchor Tie Yoke DSW 360
025750 Guide Roller SB-A,B 356
101776 Heavy Duty Spindle SLS 140/240 359
024910 Hex. Bolt ISO 4014 M20x100-8.8, galv. 359
030970 Hex. Coupler DW 26 SW 46/ 80, weldable 362
030980 Hex. Coupler DW 26 SW 46/150, weldable 362
030090 Hex. Nut DW 15 SW 30/108, galv. 360
030580 Hex. Nut DW 20 SW 36/ 60, weldable 361
030590 Hex. Nut DW 20 SW 36/110, weldable 361
710334 Hex. Nut ISO 4032 M20-8, galv. 359
027590 Hook Strap for SB, galv. 358
031631 Leading Anchor Coupler DW 15 364
031632 Leading Anchor Coupler DW 20 364
031633 Leading Anchor Coupler DW 26 364
027690 Pin Ø 19x165, galv. SB-TRIO 358
031140 Rock Anchor DW 15 360
108795 Rock Anchor HB DW 15 360
100903 SB-L Anchor Bracket 359
100901 SB-L Tension Strut, l=740mm 359 13.10
026415 Scaffold Tube 48.3x3.2, galv. per m 365
026417 Scaffold Tube Cost per Cut 365
026411 Scaffold Tube, Steel 48.3x3.2, galv. l=1.0m 365
026412 Scaffold Tube, Steel 48.3x3.2, galv. l=2.0m 365
026413 Scaffold Tube, Steel 48.3x3.2, galv. l=3.0m 365
026414 Scaffold Tube, Steel 48.3x3.2, galv. l=4.0m 365
026419 Scaffold Tube, Steel 48.3x3.2, galv. l=5.0m 365
026418 Scaffold Tube, Steel 48.3x3.2, galv. l=6.0m 365
017040 Screw-On Coupling AK 48, galv. 365
031627 Spacer Tube rough DR 32 l=3.00m 364
031634 Spacer Tube rough DR 42 l=3.00m 364
031490 Spanner for Tension Rod 20/26, galv 365
027211 Spanner SW 46, for SB 365
027213 Spanner SW 70, for SB 365
027210 Spanner SW 80, for SB 365
025730 Spindle TR 60x9/43 356
010050 Steel Waler SRZ U100, l=2.45m 359
017010 Swivel Coupling DK 48/48, galv. 365
101621 Tension Relase Plate SB DW 26 362
027540 Tension Rod 100/M 30 with Nut 363
027230 Tension Rod 135/M 30 with Nut 363
030860 Threaded Anchor Plate DW 20 361
030870 Threaded Anchor Plate DW 26 362
030840 Threaded Plate DW 15 360
030030 Tie Rod DW 15, Spec. Length 360
030640 Tie Rod DW 20, l=0.50m 361
030641 Tie Rod DW 20, l=1.00m 361
030700 Tie Rod DW 20, Spec. Length 361
030645 Tie Rod DW 26, l=0.50m 362
030646 Tie Rod DW 26, l=1.00m 362
030340 Tie Rod DW 26, Spec. Length 362
031580 V-Tie Holder DW 15 364

353
SB-A0, A, B, C Brace Frames and Accessories
Weight kg Item no.

Brace Frame SB-A0 408,00 025690

Complete with:
Pin ø 50x150 and cotter pin 8 (1x),
Screw couplings 48mm (2x),
Rear base jack spindle TR 60x9 (1x),
Front base jack spindle TR 50x8 (1x), formwork support (1x).

Detail x
ø 51 crane
160 120 240 70
lifting eye ➀

ø 26 ø 51 ø 26

15

15
55

50
Pin 50x150, Formwork holder can be
galvanised Item no. 710545 Detail y adjusted in 10mm
cotter pin 8 to DIN 11024, increments by turning
galvanised Item no. 710618

40
60
50 30

x 3060
120
150

80

120 1300 1000

13
00
1980

8
52 y

8x40 = 320
100

60
120

max 415
min 215

90
Adjusting nut Item no. 700554
175 Jack spindle base Item no. 700555
Complete base jack spindle
Formwork support 4060 TR 60x9/43 Item no. 025730
Item no. 700553
Cam nut, galvanised
Item no. 030130

Safe working load of

Accessories: the crane lifting eye ➀ : 1200kg per plate
Spanner SW 80, for SB 3,30 027210 with lifting chains ≤ 15° to the vertical

Brace Frame SB-C 49,70 025720

IPB 120
Complete with: ø 50 crane lifting eye
Pins ø 25x180 and
cotter pins 4/1 (2x).

ø 25x180
FS 4/1
1190

Safe working load of crane lifting eye:

45

1. 1500kg with lifting chains at ≤ 15° to the vertical.

2. 2500kg when lifting vertically. 160 360

354
 Weight kg Item no.

Brace Frame SB-A 325,00 025700 Detail x ø 51 crane

Complete with: lifting eye ➀
160 120 240 70
Screw couplings 48mm (2x),
Rear base jack spindle TR 60x9 (1x), ø 26 ø 51 ø 26

15

15
Front base jack spindle TR 50x8 (1x),
Formwork support (1x).

55

50
Formwork holder
2060
x can be adjusted in 10mm
Detail y increments by

80
120
turning

150

40
ø 48
120 1290

60
13
50 30

00
100
1980

8
52 y

8x40 = 320
100

60
120

max 415
min 215

90
Adjusting nut Item no. 700554
175 Jack spindle base Item no. 700555
Complete base jack spindle
Formwork support 3060 TR 60x9/43 Item no. 025730
Item no. 700553
Cam nut, galvanised
Item no. 030130

Safe working load of

Accessories: the crane lifting eye ➀ : 1200kg per plate
Spanner SW 80, for SB 3,30 027210 with lifting chains ≤ 15° to the vertical

Brace Frame SB-B 279,00 025710

Complete with: Detail x
Pin ø 50x150 and cotter pin 8 (1x),
ø 26 crane ø 51 crane lifting
Screw couplings 48mm (2x), lifting eye ➁
160 360 70
eye ➀
Rear base jack spindle TR 60x9 (1x), 13.10
ø 26
Front base jack spindle TR 50x8 (1x),
50 15

x
120
55

Formwork support (1x). 660

104
95

60

120
Formwork holder
Detail y can be adjusted in 10mm
0 increments by turning
10
20
00
2780

40
60

ø 48
50 30
930
8
995

52 y
8x40 = 320
265

100
120

215

415
max
min

60

90

Formwork support Adjusting nut Item no. 700554

Item no. 700553 175
Pin ø 50x150, Jack spindle base Item no. 700555
Cam nut, galvanised Complete base jack spindle
galvanised Item no. 710545 2060
Item no. 030130 TR 60x9/43 Item no. 025730
cotter pin 8 to DIN 11024,
galvanised Item no. 710618
Safe working load of
the crane lifting eye ➀ : 1200kg per plate
Accessories: ➁ : 700kg per plate
Spanner SW 80, for SB 3,30 027210 with lifting chains ≤ 15° to the vertical

355
 Weight kg Item no.

Spindle TR 60x9/43 28,60 025730

For SB-A and SB-B, requires a
Spanner SW 80
60

200
285
250
SW 80

150
Connector SB-A,B,C - TRIO, DOMINO 9,17 025740
One for each tie point

ø 21

117

25
125

130
25
203

cam nut 50

B 15 120
130

Accessories:
Pin ø 19x165, galv. 0,40 027690
(One for each connection)

Waler Connector SB-A,B,C 1,31 025760

For connecting VARIO SRZ U 100 and
U 120 steel walers to SB-A, B or C.
200

30
95

SRZ U 120

SRZ U 100
136
156

Accessories:
Wedge K, galv. 0,34 024250
(One for each waler clamp)

Guide Roller SB-A,B 28,80 025750

For moving
SB-A or SB-B brace frame 200
255

104
180

100
500

320

250 80

Load capacity 1,2t

356
SB 1 and SB 2 Brace Frames and Accessories
Weight kg Item no.

Brace Frame SB 1 143,00 027500 Rear Jack Spindle Item no

one Spindle PD 8, L=1160/800, galv. 018030
Complete with: two Quick Jack Nut PD 8, galv. 018270
Screw couplings 48mm (2x), one Baseplate PD 8 018070
Base jack spindle TR 48x10 (1x) with one Pin ø16x65/86, galv. 018050
one Cotter Pin 4/1, galv. 018060
Swivel nuts TR 48x10 (2x) and base plate.
Front Jack Spindle, complete 715110
one Spindle PD 8, L= 400, galv. 710116
one Quick Jack Nut PD 8, galv. 018270
740 one Baseplate PD 8 018070
100 100 one Pin ø16x65/86, galv. 018050
one Cotter Pin 4/1, galv. 018060
one Sleeve 8x60 710911
ø 32

Safe working load of the crane

lifting eye: 1500kg with lifting
chains ≤ 15° to the vertical

1776 (GT 24)

45° TR 48x10

2320
1645

ø 32

1160
screw coupling 48mm

420
310

max 305
min 145
60

1200

max 510
min 145
150
150 1950

Brace Frame SB 2 360,00 027510

Complete with: 35
Screw couplings 48mm (3x), 120 120
Base jack spindle TR 60x9 (1x) with screw coupling 48mm
Swivel nuts TR 60x9 (2x). Item no
Rear Jack Spindle, complete 715121
two Hex. Nuts TR 60x9 710067

Front Jack Spindle, complete 715110

see SB 1-370 for individual parts
1184 (GT 24)

13.10
23
70

ø 32
1776 (GT 24)
4680

20
80
1184 (GT 24)

TR 60x9

SW 80
410
770
235

max 235
20

40
min 85

max 360
min 170

250
150 250
2550

Accessories:
Spanner SW 80, for SB 3,30 027210

357
 Weight kg Item no.

Adapter SB-1,2 - TRIO, DOMINO 49,60 027680

For single face formwork with SB 1 and 2
brace frame.
250

120 240

60

265
min 1270 max 1650

1770

650
160
60

490
Load-bearing point
Perm. load of the crane lifting eye: 1000kg ø 21

with lifting chains ≤ 15° to the vertical

Accessories: 25 25

Pins ø 19x165, galv. SB-TRIO (2x) 0,40 027690

Hook Straps for SB, galv. (2x) 2,81 027590

Pin ø 19x165, galv. 0,40 027690

ø 19x165
145
20
ø 19
ø 35

8 165

For 120mm thick formwork panels.

Hook Strap for SB, galv. 2,80 027590 150 35

For connecting SB 1-370 and SB 2-590
brace frames quickly to SRZ U 100, 30
U 120 and U 140 section steel walers.
152 (U100)
162 (U120)

172 (U140)
M14

22mm spanner required

358
Brace frame SB-L (light)
Weight kg Item no.

SB-L Anchor Bracket 11,90 100903 50

Complete with:
Pin ø 20x140 and Cotter Pin 4/1 ø 21

300
180
ø 20x140
FS 4/1

60
Accessories:

6
280 60
Compensation Washer 20, galv. (4x) 0,17 024180 330
Hex. Bolt ISO 4014 M20x100-8.8, galv. (2x) 0,30 024910
Hex. Nut ISO 4032 M20-8, galv. (2x) 0,064 710334

Steel Waler SRZ 245 52,10 010050

End-Detail
Profile U100 ø6 93 25
Wy = 82.4cm3 ø9

60

52
Iy = 412cm4

100

20
52 60 46
152 40 7 x 60 = 420

30 170 135 205 445 445 205 135 170 30

50

2450

SB-L Tension Strut, L = 740mm 5,37 100901

820
740
50

ø 21

13.10

Detail SRZ
Heavy duty spindle SLS 140/240 24,40 101776
For transferring loads, particularly Hex. Nut ISO 4032
in bridge-building. M20-8, galv., Hex. Bolt ISO 4014
The maximum load of 70kN Item no. 710334 M20x100-8.8, galv.
Item no. 024910
applies in conjunction with
SRZ U100 (see detail) 2 x spacing washers 20, galv.
Item no. 024180

min. 1400 - max. 2400

ø 20 1346
ø 89

ø 20x140
Base Plate-2 for RS 1000/1400, galv. 4,91 102018
108
78

Complete with:
Pin ø 20x140 and Cotter Pin 4/1 (2x). 120 30 52
190 25

ø 21
114

293 ø 21

359
DW15 Anchor System
Weight kg Item no.

Brace Frame Double Anchor DW15 2,50 030060

Cannot be welded! Observe approval

230
conditions!

Permissible load to
DIN 18216: 2x90kN

290
R1
depending on concreting

0
00

35
strength and installation

DW 15
depth
250 45°

Hex Coupler DW15 SW 30/108, galv. 0,40 030090

SW 30 108
Cannot be welded! For connecting
Tie Rod DW15 DW 15 52 52

Permissible load to
DIN 18216: 90kN

Tie Rod DW15 Special Length 1,44/m 030030 L

Cannot be welded! Observe approval
conditions!
Cutting Costs for Tie Rod DW15 030050

Threaded Plate DW15 0,60 030840 60

Perm. loads: see product information. ø6

DW 15
ø 80
ø 27

Wingnut DW15, galv. 0,46 030100

SW 27
50

Permissible load to DW 15
DIN 18216: 90kN ø 34 110

Double Anchor Tie Yoke DSW 7,30 027520

330

230
ø 60

Permissible load: 2x90kN ø 20

Rock Anchor DW15 0,35 031140

See Instructions for Use. 70

Rock Anchor HB DW15 0,45 108795

See Instructions for Use.
100

360
DW 20 Anchor System
Weight kg Item no.

Tie Rod DW 20 L = 0,50m 1,28 030640

Tie Rod DW 20 L = 1,00m 2,56 030641
Tie Rod DW 20 special length 2,56/m 030700
Cannot be welded! Observe approval
conditions!
500 or L

Permissible load to DIN 18216: 150kN

Cutting Costs for Tie Rod DW20 030800

Threaded Plate DW20 0,70 030860

Perm. loads: see product information. 65
ø6

DW20
ø 100
ø 32
Hex Coupler DW20, SW 36/60 0,37 030580
May be welded!
Hex Coupler DW20, SW 36/110 0,63 030590
May be welded! For connecting Tie Rod DW20.

SW 36 110 60

DW20 53 53

13.10

Permissible load to DIN 18216: 150kN

Wingnut DW20, galv. 0,79 030990

DW20
SW 36
60

ø 42 130

Permissible load to DIN 18216: 150kN

Counterplate DW20, 120x120x20 2,18 030830

120 20

ø 26
Permissible load to DIN 18216: 150kN

361
DW 26 Anchor System
Weight kg Item no.

Tie Rod DW26 L = 0,50m 2,24 030645

Tie Rod DW26 L = 1,00m 4,48 030646
Tie Rod DW26, special length 4,48/m 030340
Cannot be welded! Observe approval
conditions! 500 bzw. L

Cutting Costs for Tie Rod DW26 030500

Threaded Plate DW26 1,20 030870

Perm. loads: see product information.
70
ø6

DW26
120
40
Hex Coupler DW26, SW 46/150 1,39 030980
Weldable! For connecting Tie Rod DW26.
SW 46 72 72

DW26 150

Permissible load to DIN 18216: 250kN

SW 46
Hex Nut DW26, SW 46/80 0,80 030970
Weldable!

DW26 80

Permissible load to DIN 18216: 250kN

Tension Release Plate SB DW26 9,48 101621

175 DW20
For brace frame anchoring with DW20
50 63
or DW26. For easy release of the tension
load using 4 hex. bolts M30. Only to be Wingnut
DW20, galv.
47

used with anchor wale 55 or 235.

Hex bolts must be fully engaged before
180
47 50

Hex. Coupler
use. DW26, SW 46

ø 35
SW 46
25

DW26

Hex. Coupler
165

DW26, SW 46

Permissible load for tension release plate

to DIN 18216: 250kN.
Max. tie load must not be exceeded!

362
 Weight kg Item no.

Anchor Plate SB-DW26 8,02 027480

180
For anchoring SB-A, B and SB 1,2
ø 35

25
175

140
Anchor Waler 55 or 235

Permissible load to DIN 18216: 250kN

Coupling nut M30/DW26, galv. 2,41 030400

55 195
SW 46 102,5 30

DW26

M30
5

Permissible load to DIN 18216: 250kN

Tension rod 100 M30 with nut 5,17 027540

Tension rod 135 M30 with nut 6,81 027230
Quality: 10,9

SW 46 SW 22
M 30

200 400

for SB 2 L = 1000
750
13.10
for SB-A, B L = 1350

Permissible load to DIN 18216: 250kN

Anchor Waler U140, L=0,55m 9,94 027650

Anchor Waler U140, L=2,35m 39,90 027530
Also for DW20 and DW26 anchor system.
140

350
550

60

350 350

1550

2350

Accessories:
Tension Release Plate SB DW26 or 9,48 101621
Anchor Plate SB-DW26 8,02 027480

363
Anchoring Accessories
Weight kg Item no.

V-Tie Holder
For fixing SB Anchors at 45°.
V-Tie Holder DW15 0,44 031580
V-Tie Holder DW20 0,42 031590
V-Tie Holder DW26 0,43 031600

298

48
50
Leading Anchor Coupler
Plastic 200
For fixing SB Anchors.
90
DW15 (red) 0,45 031631
DW20 (yellow) 0,46 031632
DW26 (white) 0,47 031633

DW15/20/26
SW 70

V anchor bracket

90

Spacer tube with rough finish

DW15/20/26 tie rod

70mm Spanner required. DW15/20/26 threaded anchor plate

Spacer Tube Rough DR 32, L = 3,00m 1,12 031627

Plastic Spacer Tube used with Tie Rod DW15.

L
ø 32
ø 37

Spacer Tube Rough DR 42, L = 3,00m 1,47 031634

Plastic Spacer Tube used with Tie Rod
DW20 and 26.
L
ø 42
ø 47

364
Tools and Accessories
Weight kg Item no.

Spanner SW 80, for SB 3,30 027210

For adjusting TR 60/9 Base Jack Spindles
of SB Brace Frame.
Spanner SW 70, for SB 2,30 027213
For unscrewing DW Positioning Coupling.
Spanner SW 46, for SB 0,76 027211
For undoing Anchor Release Plate
and Coupling Nut M 30 / DW 26.

SW 80 L = 645
SW 70 L = 570
SW 46 L = 380

465
Spanner for Tension Rod 20/26 2,32 031490
For unscrewing DW20 and DW26 Anchors.

300
Screw-On Coupling AK, galv. 0,85 017040
With welded M20x32 Bolt.

13.10

Requires 30 and 19mm Spanners

Swivel Coupling DK 48/48, galv. 1,40 017010

19mm Spanner required

Scaffold Tube Steel 48,3x3,2 L = 1,0m 3,55 026411

L = 2,0m 7,10 026412
L = 3,0m 10,65 026413
L = 4,0m 14,20 026414
L = 5,0m 17,75 026419
L = 6,0m 21,60 026418
Special Length 3,55/m 026415

Cutting Costs for Scaffold Tubes 026417

365
 Weight kg Item no.
318
Brace Frame Mounting Shoe 28,00 106661 208 240
Horizontal use of brace frame as 183
climbing bracket.

Detail SB-A0, A, B

212

188
332

Accessories:
Brace Frame Adapter SB-A0, A, B 5,08 106662
Climbing Cone-2 M 36/DW 26, galv. 3,04 030940
Scaffold Mounting Ring 2-26, galv. 1,72 029490
Hex. Bolt ISO 4014 M36x130-10,9 1,40 029550
Tie Rod DW 26 Spec. Length 4,48/m 030340
Cutting Cost Tie Rod DW 26 030500
Threaded Anchor Plate DW 26 1,20 030870

Brace Frame Adapter SB-A0, A, B 5,08 106662

For fixing the mounting shoe to
the brace frame SB-A0, A or B.
Complete with: SW36 M24x220
hex. bolt ISO 4014 M24 x 220-10,9 (2x) and
hex. nut ISO 7042 M24-10 (2x)
165

235

366
 13.10

367
368
14.10 System DW 15, B 15

Page Page

026440 Anchor Positioning Stud AH-DW 15, 373 030870 Threaded Anchor Plate DW 26 377
026280 Anchor Sleeve DW 15 373 030745 Tie Rod B 20, Spec. Length 375
030060 Brace Frame Double Anchor DW 15 372 030700 Tie Rod DW 20, Spec. Length 375
030130 Cam Nut DW 15, galv. 371 030640 Tie Rod DW 20, l=0.50m 375
031260 Concrete Spacer Tube FZR 22 l=0.90m 374 030641 Tie Rod DW 20, l=1.00m 375
065033 Cone DR 22 374 030680 Tie Rod DW 20, l=6.00m 375
031390 Cone FZR 22 374 030340 Tie Rod DW 26, Spec. Length 377
030140 Counterplate DW 15, 120x120x15 370 030645 Tie Rod DW 26, l=0.50m 377
030050 Cutting Cost Tie Rod DW 15 / B 15 370 030646 Tie Rod DW 26, l=1.00m 377
030050 Cutting Cost Tie Rod DW 15 / B 15 370 030690 Tie Rod DW 26, l=6.00m 377
031320 Cutting Cost Tube FZR 22 374 031050 Tie Rod Wrench 20, galv. 376
027520 Double Anchor Tie Yoke DSW 372 030990 Wingnut DW 20, galv. 375
030070 Hex. Nut DW 15 SW 30/ 50, galv. 371
030550 Hex. Nut DW 15 SW 30/ 50, weldable 371
030090 Hex. Nut DW 15 SW 30/108, galv. 371
065036 Plug DR 22 374 14.30 System DK, SK, KK
031360 Plug FZR 22mm 374
031550 Repoxal Glue, 1kg 374
108795 Rock Anchor HB DW 15 372 101995 Concrete Cone Gauge 384
065030 Spacer Tube rough DR 22 l=0.21m 374 031641 DK Concrete Cone Architc. DW 15, 58/52 379
065031 Spacer Tube rough DR 22 l=0.27m 374 031642 DK Concrete Cone DW 15 58/30 379
065027 Spacer Tube rough DR 22 l=2.00m 374 031643 DK Concrete Cone UNI DW 15 58/52 379
030440 Spherical Nut DW 15, galv. 371 031635 DK Cone DW 15/35 379
065039 Stopend Sleeve DW 15 373 031636 DK Cone DW 15/55 379
030840 Threaded Plate DW 15 373 031637 DK Cone DW 20/55 380
030150 Tie Rod B 15 l=0.30m 370 031638 DK Cone DW 26/55 380
030740 Tie Rod B 15 spec. Length 370 031655 DK Cone Remover UNI 384
022030 Tie Rod Cylinder Yoke SW, galv. 372 031644 DK Tongs for Concrete Cone 58 384
030005 Tie Rod DW 15 l=0.50m 370 031555 Glue Component A 380
030010 Tie Rod DW 15 l=0.85m 370 031556 Glue Component B 380
030480 Tie Rod DW 15 l=1.00m 370 031554 Glue for Concrete Cones, 5kg Set 380
030490 Tie Rod DW 15 l=1.20m 370 031652 KK Concrete Cone M24-67/52 383
030170 Tie Rod DW 15 l=1.50m 370 031658 KK Concrete Cone M24-67/52 BOL 383
030020 Tie Rod DW 15 l=1.70m 370 031653 KK Concrete Cone M30-80/52 383
030180 Tie Rod DW 15 l=2.00m 370 031654 KK Concrete Cone M36-90/52 383
030710 Tie Rod DW 15 l=2.50m 370 029610 Ratchet Wrench 1" 384
030720 Tie Rod DW 15 l=3.00m 370 072180 Ratchet Wrench 1/2 " 384
030730 Tie Rod DW 15 l=3.50m 370 031645 SK Anchor Cone DW 15 381
030160 Tie Rod DW 15 l=6.00m 370 031646 SK Anchor Cone DW 20 381
030030 Tie Rod DW 15 spec. Length 370 031647 SK Anchor Cone DW 26 381
108129 Tie Rod Spanner DW 15 370 031650 SK Concrete Cone DW 20, 67/60 382
031070 Tie Rod Wrench 15, galv. 372 031651 SK Concrete Cone DW 26, 100/60 382
030190 Triangular Wingnut DW 15, galv. 371 104643 SK Lead Cone DW 15 382
031150 Waterstop Centrepiece DW 15 371 031648 SK Sealing Washer DW 20 381
031300 Weld on Anchor DW 15 373 031649 SK Sealing Washer DW 26 381 14.10
030110 Wingnut Counterplate DW 15, galv. 370 031639 SK Sealing Washer UNI DW 15 379 -
030100 Wingnut DW 15, galv. 370 031656 SK Tongs for Concrete Cone 67 384 14.30
030370 Wingnut Pivot Plate DW 15 , galv. 370 031657 SK Tongs for Concrete Cone 100 384
031671 SK Tube Seal 22 382
031672 SK Tube Seal 28 382
031677 SK Tube Seal 42 382
14.20 System DW 20, B 20, 029650 Socket SW 27-1/2" 384
029630 Socket SW 46-1" 384
DW 26 031480 Socket Wrench SW 36, cromatized 384
065027 Spacer Tube rough DR 22 l=2.00m 379
030663 Adapter I for Pretension Jack 378 031626 Spacer Tube rough DR 28 l=3.00m 380
030664 Adapter III for Pretension Jack 378 031627 Spacer Tube rough DR 32 l=3.00m 376
030930 Anchor Cone 2 DW 20/DW 20, galv. 375 031634 Spacer Tube rough DR 42 l=3.00m 382
030950 Anchor Cone 2 DW 26/DW 26, galv. 377
030830 Counterplate DW 20, 120x120x20 375
030420 Counterplate DW 26, 120x120x20 377
030800 Cutting Cost Tie Rod DW 20 / B 20 375
030500 Cutting Cost Tie Rod DW 26 377
102390 Drill- and Pretension Device 45° 378
030970 Hex. Coupler DW 26 SW 46/ 80, weldable 377
030980 Hex. Coupler DW 26 SW 46/150, weldable 377
030580 Hex. Nut DW 20 SW 36/ 60, weldable 376
030590 Hex. Nut DW 20 SW 36/110, weldable 376
030460 Pretension Jack for DW 15/20/26 378
031626 Spacer Tube rough DR 28 l=3.00m 376
031634 Spacer Tube rough DR 42 l=3.00m 377
030860 Threaded Anchor Plate DW 20 375

369
Tie Rod DW 15 and Accessories
Weight kg Item no.

Tie Rod DW 15
Non-weldable! Observe certification requirements!
Permissible load to DIN 18216: 90kN
DW 15 L = 0,50m 0,72 030005
DW 15 L = 0,85m 1,22 030010
DW 15 L = 1,00m 1,44 030480
DW 15 L = 1,20m 1,73 030490 L
DW 15 L = 1,50m 2,16 030170
DW 15 L = 1,70m 2,45 030020
DW 15 L = 2,00m 2,88 030180
DW 15 L = 2,50m 3,60 030710
DW 15 L = 3,00m 4,32 030720
DW 15 L = 3,50m 5,04 030730
DW 15 L = 6,00m 8,64 030160
Tie Rod DW 15 Special Length 1,44/m 030030
Cutting Cost Tie Rod DW 15 / B 15 030050

Tie Rod B 15 L = 0,30m 0,42 030150

Weldable! Permissible load: 85kN
Tie Rod Special Length B 15 1,55/m 030740
Cutting Cost Tie Rod DW 15 / B 15 030050

Wingnut Pivot Plate DW 15, galv. 1,54 030370

With pivoted, captive nut.
120

76
27

ø9
8° 8°

110
Permissible load to DIN 18216: 90kN

Wingnut Counterplate DW 15, galv. 0,80 030110

For tying panel formwork systems.
50
27
96

106
Permissible load to DIN 18216: 90kN

Wingnut DW 15, galv. 0,44 030100

SW 27

50

DW 15 ø 34

Permissible load to DIN 18216: 90kN 110

15
Counterplate DW 15, 120x120x15 1,62 030140 120
25

Permissible load to DIN 18216: 90kN ø 20

Tie Rod Spanner DW 15 3,48 108129 ø 25

74
130

1096

370
 Weight kg Item no.

Triple Wingnut DW 15, galv. 0,53 030190

ø 40

90

50
SW 27
15
Permissible load to DIN 18216: 90kN

Cam Nut DW 15, galv. 0,32 030130

For tying at the bottom of panels
and transferring tension loads in
ø 50
conjunction with bulkhead ties.

SW 27
12

50
0°
°
120

Permissible load to DIN 18216: 90kN

Spherical Nut DW 15, galv. 0,49 030440

For tying RAPID column formwork.
106

68
SW 27
Permissible load to DIN 18216: 90kN

Hex. Coupler DW 15 SW 30/50, galv. 0,20 030070

Hex. Coupler DW 15 SW 30/50, weldable 0,20 030550
SW 30 50

Permissible load to DIN 18216: 90kN 14.10

-
14.30
Hex. Coupler DW 15 SW 30/108, galv. 0,40 030090
For extending Tie Rod DW 15. 108

SW 30 52 52

Permissible load to DIN 18216: 90kN

Waterstop Centrepiece DW 15, rough 0,81 031150 4

ø 51
ø 36

53 5 52
15

80 110

Permissible load to DIN 18216: 90kN

371
 Weight kg Item no.

Tie Rod Cylinder Yoke SW, galv. 2,10 022030

For tying at corners with DW 15.
150

ø 50
ø 20
Permissible load: 90kN

Double Anchor Tie Yoke DSW 7,30 027520

For anchoring with DW 15.
330

230

ø 60
ø 20

Permissible load: 2 x 90kN

Rock Anchor DW15 0,35 031140 70

See Instructions for Use.

Rock Anchor HB DW15 0,45 108795

See Instructions for Use.
100

Tie Rod Wrench 15, galv. 1,26 031070

Enables one person to
tighten Tie Rod DW 15.
140

250
30
15

Brace Frame Double Anchor DW 15 2,50 030060

Non-weldable!
230
290
0
35
DW 15

Permissible load to DIN 18216: 2 x 90kN

depending on concrete strength 250 45°
and installation depth.

372
 Weight kg Item no.

Wedling Anchor DW 15 1,37 031300

For anchoring single sided forms.
6 180

60
4 both sides

Permissible load to DIN 18216: 90kN

Bolt Anchor Sleeve DW 15 1,09 026280

120 8 68

ø 12

100
ø 30
DW 15
Accessories:
Anchor Posit. Stud f. AH-DW15, galv. 0,10 026440

Anchor Posit. Stud f. AH-DW15, galv. 0,10 026440

DW 15
ø 50

2,8
ø 4,5
50

Stopend Sleeve DW 15 0,075 065039

Complete with:
Fixing lug for Stopend Sleeve. 14.10
74 -
14.30
52 7
ø 24

ø 42

17 SW 32
Accessories:
Plug for Stopend Sleeve DW 15 0,001 065060

Threaded Anchor Plate DW 15 0,60 030840

60 6
DW 15
ø 80
ø 27

Permissible load to DIN 18216: 90kN.

Dep. on conc. strength, embedment depth.

373
 Weight kg Item no.

Spacer Tube Rough DR

Plastic Spacer Tube for the use
with Tie Rod DW 15.
DR 22 L = 2,00m 0,413 065027
DR 22 L = 0,21m 0,039 065030 L
DR 22 L = 0,27m 0,050 065031

ø 26

ø 22
Cone DR 22 0,010 065033 30
Plastic. 15

For Spacer Tube DR 22.

ø 45

ø 22
Supplied in packs of 500 pcs.

Plug DR 22 0,002 065036

Plastic.
For Spacer Tube DR 22. 12
Supplied in packs of 1000 pcs.

ø 22
ø 23
Not for use with PERI Formwork Panels.

Concrete Spacer Tube

Concrete Spacer Tube FZR 22 l=0,90m 1,50/m 031260

Spacer Tube made of fibre reinforced
concrete for use with Tie Rod DW 15.

L
ø 26

ø 22

Cutting Cost Tube FZR 22 031320

Cone FZR 22 0,005 031390 36

For Spacer Tube FZR. 10
ø 22
ø 43

Supplied in packs of 1000 pcs.

Plug FZR 22mm 0,017 031360

Made of fibre reinforced concrete. 12
For Spacer Tube FZR.
ø 22
ø 23

Supplied in packs of 1000 pcs - no asbestos!

Repoxal Glue 1,12 031550

Supplied in packs of 1,0kg
Consumption:
1kg for approx. 330 Plugs FZR.

374
DW 20 Tie Rod and Accessories
Weight kg Item no.

Tie Rod DW 20 L = 0,50m 1,28 030640

DW 20 L = 1,00m 2,56 030641
DW 20 L = 6,00m 15,36 030680
DW 20 Special Length 2,56/m 030700
L
Observe certification requirements!
Non-weldable!

Permissible load to
DIN 18216: 150kN

Cutting Cost DW 20 / B 20 030800

Tie Rod B 20
Weldable! Permissible load: 150kN
Special Length 2,60/m 030745
Cutting Cost DW 20 / B 20 030800

Wingnut DW 20, galv. 0,79 030990 ø 42

36
60

130
Permissible load to DIN 18216: 150kN

Counterplate DW 20, 120x120x20 2,18 030830

120 20

ø 26

Permissible load to DIN 18216: 150kN

14.10
-
25 117
Anchor Cone-2 DW 20/DW 20, galv. 1,83 030930 14.30
Tie rod length = wall thickness –2x72mm ø6
SW 46
DW 20
DW 20

72 84

142
Permissible load to DIN 18216: 150kN

Threaded Anchor Plate DW 20 0,70 030860

65
ø6
DW 20
ø 100
ø 32

Permissible load to DIN 18216: 150kN.

Dep. on conc. strength, embedment depth.

375
 Weight kg Item no.

Hex. Nut DW 20 SW 36/60 0,37 030580

weldable! SW 36

DW 20 60

Permissible load to DIN 18216: 150kN

Hex. Coupler DW 20 SW 36/110 0,63 030590

weldable!
For extending Tie Rod DW 20.
SW 36 53 4 53

DW 20 110

Permissible load to DIN 18216: 150kN

Tie Rod Wrench 20, galv. 1,69 031050

Prevents DW 20 tie rod turning.
For undoing tie rod DW 20.
140

260
40
20

Spacer Tube Rough 28 L = 3,00m 1,03 031626

Spacer Tube Rough 32 L = 3,00m 1,12 031627
Plastic spacer tube for using Tie Rod DW 20.

L
ø 33

ø 28

376
DW 26 Tie Rod and Accessories
Weight kg Item no.

Tie Rod DW 26 L = 0,50m 2,24 030645

DW 26 L = 1,00m 4,48 030646
DW 26 L = 6,00m 26,88 030690 L
DW 26 Special Length 4,48/m 030340
Observe certification
requirements!
Non-weldable!

Permissible load to
DIN 18216: 250kN

Cutting Cost Tie Rod DW 26 030500

120 20
Counterplate DW 26, 120x120x20 2,14 030420

120
Permissible load to
DIN 18216: 250kN
ø 32

25 137 SW 55
Anchor Cone DW 26/DW 26, galv. 3,27 030950
ø6
Tie rod length = wall thickness –2x72mm DW 26

DW 26
Permissible load to 72
95
DIN 18216: 250kN 162

Threaded Anchor Plate DW 26 1,20 030870 70

DW 26
6
ø 120
ø 40

Permissible load to DIN 18216: 250kN. 14.10

Dep. on conc. strength, embedment depth. -
14.30
Hex. Nut DW 26 SW 46/150 1,39 030980
weldable! For extending Tie Rod DW 26.
Hex. Nut DW 26 SW 46/80 0,80 030970
SW 46 72 72
weldable!

DW 26 150 80

Permissible load to DIN 18216: 250kN

Spacer tube rough 42, L = 3,00m 1,47 031634

Plastic spacer tube for using tie rod DW 26.

L
ø 42
ø 47

377
 Weight kg Item no.

Pretension Jack for DW 15/20/26 60,00 030460

Maximum Tension Load: 30 Mp = ^ 300 kN
For smooth vertical concrete joints,
and pulling out embedded tie rods
from concrete.

Complete with:
Handpump with pressure relief valve
and pressure gauge.
Pretension Jack with high pressure tube.
Compression pieces Ø 18, Ø 24 and Ø 33.
Cylinder adapter Ø 18, Ø 24 and Ø 33.
Oil level stick.
Screwdriver 12x200.
Pivot-face adapter 80/5-40/80.
Metal box.
Adapter l.
Adapter lll.

Adapter I for Pretension Jack 2,00 030663

For pretensioning of tie rods.

Adapter III for Pretension Jack 1,70 030664

For pulling out embedded tie rods
from concrete.

Pretensioning and Drilling Gauge 45° 6,52 102390

355
For drilling and pretensioning DW 15
anchor points inclined at 45°
(used for brace frame SB).
193

Mark for drilling axis

210

150

120

378
DK Tie System DW 15
Weight kg Item no.

DK Sealing Cone DW 15/35 (red) 0,034 031635

For fire resistant and soundproof tie points
with Tie Rod DW 15; withstands percolating
water. Use with Spacer Tube Rough 22.
21 34

ø 22,3

ø 61,5
Pack of 50

DK Sealing Cone DW 15/55 (red) 0,061 031636

For waterproof, fire resistant and sound
proof tie points with Tie Rod DW 15;
Use with Spacer Tube Rough 22.
23 55

ø 22,3

ø 61,5
Pack of 50

SK Sealing Ring UNI DW 15 (red) 0,003 031639

ø 62,2

ø 33
For sealing DK Sealing Cones DW 15 and
SK Tie Cone DW 15 against formwork.
1
11

When using the SK sealing ring with

Pack of 50 SK tie cone, the tie rod must be
shortened 1mm at each end.

DK Concrete Cone DW 15-58/30 0,17 031642

For sealing tie points with DK Sealing Cone 30
DW 15/35.

ø 58,5
ø 52,5

Pack of 50
Accessories: 5kg Pack
of Sealing Compound 6,13 031554

DK Concrete Cone UNI 58/52 0,27 031643

For sealing tie points with DK Sealing Cone
DW 15/55, DW 20/55, DW 26/55
and SK Tie Cone DW 15. 52
14.10
-
ø 58,5
ø 48

Pack of 50 14.30
Accessories: 5kg Pack
of Sealing Compound 6,13 031554

DK Concrete Cone architectural 01 0,26 031641

DW 15/58-52
ø 47

ø 47
ø 54

Pack of 50
Accessories: 5kg Pack 20
of Sealing Compound 6,13 031554 52

Spacer Tube Rough 22

Plastic spacer tube for using Tie Rod DW 15.

L
ø 26

ø 22

DR 22 L = 2,00m 0,41 065027

DR 22 L = 0,21m 0,04 065030
DR 22 L = 0,27m 0,05 065031

379
DK Tie System DW 20 / DW 26
Weight kg Item no.

DK Sealing Cone DW 20/55 (yellow) 0,076 031637

For fire resistant and soundproof tie points
with Tie Rod DW 20; withstands percolating
water. Use with Spacer Tube Rough 28.
23 55

ø 61,5
ø 28
Pack of 50

DK Sealing Cone DW 26/55 (white) 0,073 031638

For fire resistant and soundproof tie points
with Tie Rod DW 26; withstands percolating
water. Use with Spacer Tube Rough 42.
22 55

ø 42,4

ø 61,5
Pack of 50

DK Concrete Cone UNI 58/52 0,27 031643

For sealing tie points with DK Sealing Cone
DW 15/55, DW 20/55, DW 26/55
and SK Tie Cone DW 15.
52

ø 58,5
ø 48

Pack of 50
Accessories:
5kg Pack of Sealing Compound 6,13 031554

Spacer Tube Rough 28, L= 3,00m 1,03 031626

Plastic spacer tube for using Tie Rod DW 20.

L
ø 33

ø 28

Spacer Tube Rough 42, L= 3,00m 1,47 031634

Plastic spacer tube for using Tie Rod DW 26.

L
ø 42
ø 47

Sealing Compound
For gluing Concrete Cones in place.
5kg pack 6,13 031554
Component A 0,42 031555
Component B 0,45 031556
A /B
5kg set consisting of: S et A B
Component A (6x), Component B (6x),
Mixing bowl (2x) and Mixing rod (3x).

380
SK Tie System DW 15 / DW 20 / DW 26
Weight kg Item no.

SK Anchor Cone DW 15 (red) 0,52 031645 SW 27

105
For waterproof, fire resistant, soundproof
DW 15
and radiationproof tie points with 55
Tie Rod DW 15; suitable for vaults and
strongrooms.

ø 61,5

ø 40
Permissible load to DIN 18216: 90kN Tie rod length = wall thickness – 2x55mm

SK Sealing Washer UNI DW 15 (red) 0,003 031639

For sealing DK Sealing Cones DW 15 and

ø 62,2

ø 33
SK Tie Cone DW 15 against formwork.
1
11

When using the SK sealing ring with

Pack of 50 SK tie cone, the tie rod must be
shortened 1mm at each end.

SK Tie Cone DW 20 (yellow) 0,75 031646

For waterproof, fire resistant, soundproof 127 SW 36
and radiationproof tie points with
DW 20
Tie Rod DW 20; suitable for vaults and 65

strongrooms.

ø 46
ø 70

Permissible load to DIN 18216: 150kN Tie rod length = wall thickness – 2x65mm

SK Sealing Washer DW 20 (yellow) 0,005 031648

ø 71

ø 42

For sealing SK Tie Cone DW 20,

against formwork.
1,5
13

When using the SK sealing ring with

Pack of 50 SK tie cone, the tie rod must be 14.10
shortened 1.5mm at each end. -
14.30
SK Anchor Cone DW 26 (white) 1,80 031647
For waterproof, fire resistant, soundproof 140 SW 46
and radiationproof tie points with
75 DW 26
Tie Rod DW 26; suitable for vaults and
strongrooms.
ø 103

ø 60

Permissible load to DIN 18216: 250kN Tie rod length = wall thickness – 2x75mm

SK Sealing Wahser DW 26 (white) 0,014 031649

For sealing SK Tie Cone DW 26 against
ø 104

formwork.
ø 55

1,7
14

When using the SK sealing ring with

Pack of 50 SK tie cone, the tie rod must be
shortened 2mm at each end.

381
 Weight kg Item no.

SK Tube Seal
For spacer tube rough.
SK 22 0,002 031671
SK 28 0,003 031672 14 3
SK 42 0,005 031677 23 2
22 2

ø 41

ø 53
ø 27

ø 43
ø 22

ø 36
Pack of 250

SK Concrete Cone DW 20-67/60 0,41 031650

For sealing tie points with SK Sealing Cone
DW 20. 60

ø 67
ø 55
Pack of 50
Accessories:
5kg Pack of Sealing Compound 6,13 031554

SK Concrete Cone DW 26-100/60 0,89 031651

For sealing tie points with SK Sealing Cone
DW 26.
60

ø 100
ø 80

Pack of 50
Accessories:
5kg Pack of Sealing Compound 6,13 031554

SK Lead Cone DW 15 0,26 104643

For sealing tie points in radiation-free
17,5 20
rooms. Use in conjunction with the
SK anchor cone DW 15.
ø44,4
ø40,2
15

Spacer Tube Rough 22 L = 2,00m 0,41 065027

Plastic spacer tube for using Tie Rod DW 15. 2000

Spacer Tube Rough 28 L = 3,00m 1,03 031626

ø 26
ø 22

Plastic spacer tube for using Tie Rod DW 20.

Spacer Tube Rough 42 L = 3,00m 1,47 031634 3000

Plastic spacer tube for using Tie Rod DW 26.
ø 33
ø 28

3000
ø 42
ø 47

Pack of 25

382
KK Tie System
Weight kg Item no.

KK Concrete Cone M24-67/52 scr. 0,26 031658

For tie points with screw-on cone
M 24/DW 20

ø 36,2
ø 67,4
23,5

52
Pack of 50
Accessories:
5kg Pack of Sealing Compound 6,13 031554

KK Concrete Cone M24-67/52 0,27 031652

For tie points with climbing cone-2
M 24/DW 15

ø 40,3
ø 67,4
23,5

52
Pack of 50
Accessories:
5kg Pack of Sealing Compound 6,13 031554

KK Concrete Cone M30-80/52 0,40 031653

For tie points with climbing cone-2
M 30/DW 20. ø 80,5

23,5 ø 50,5

Pack of 50 52
Accessories:
5kg Pack of Sealing Compound 6,13 031554

KK Concrete Cone M36-90/52 0,57 031654

For tie points with climbing cone-2
M 36/DW 26
14.10
-
ø 65,3
ø 90,5

14.30

23,5

Pack of 50 52

Accessories:
5kg Pack of Sealing Compound 6,13 031554

383
Tools for DK and SK Tie System
Weight kg Item no.

Ratchet Wrench
1/2" 0,56 072180
1" 5,30 029610

Socket 27mm for 1/2" drive 0,16 029650

For removing SK Tie Cones DW 15.
Socket 46mm for 1" drive 0,58 029630
For removing SK Tie Cones DW 26.

Socket Spanner 36mm, chromium-plated 2,46 031480

For removing SK tie cones DW 20.

DK Cone Pliers 58 (red) 0,56 031644

For DK and SK Concrete Cones DW 15.
SK Cone Pliers 67 (yellow) 0,57 031656
For SK Concrete Cones DW 20 and
KK Concrete Cones M24.
SK Cone Pliers 100 (white) 0,60 031657
For SK Concrete Cones DW 26.

DK Cone Spanner UNI 0,89 031655

For removing DK Sealing Cones.

Concrete Cone Gauge 1,03 101995

For flush insertion of concrete cones.
114

200

384
 14.10
-
14.30

385
386
15.10 Formwork Tools

Page Page

102786 Adapter 1/2" - 3/4" 389 102098 PERIDRAIN Clip 398

027212 Allan Key SW 14, long 389 102110 PERIDRAIN Edge Strip 121x3000x12 398
072140 Bit Point TX 30 388 102099 PERIDRAIN Edge Strip Clip 398
072220 Bitholder for SCU 7-9 388 031674 PERIDRAIN Fabric 1.50x25.00m 398
105328 Centrepivot VHM (Ø 60mm) 391 031673 PERIDRAIN Fabric 2.80x25.00m 398
072240 Depth Chuck for SCU 7-9 388 Plugs 393
727112 Drill Bit HSS DIN 338, Ø 5.1 mm 390 031520 Pressure Sprayer 396
031040 Drill Bit Ø 20mm 390 031440 Release Agent Bio Clean 20 L 396
031080 Drill Bit Ø 25mm 390 031455 Release Agent Bio Clean 208 L 396
031030 Drill Bit Ø 35mm 390 031420 Release Agent PERI CLean 20 L 396
031100 Drill Bit Ø 40mm 390 031435 Release Agent PERI CLean 208 L 396
031120 Drill Bit Ø 50mm 390 Scaffold Tubes 394
072150 Electric Power Wrench ASB 636, M 14 388 017040 Screw-On Coupling AK 48, galv. 394
072160 Extension 1/2" l=250mm 388 101706 Shutter Joint Profile 21/40-300 392
031090 Form Lining Drill Bit Ø20x1000 390 030820 Spanner for Clamp Lock, galv. 393
027190 Insert Socket SW 17 389 102109 Spax Screw SK 3.5x45 398
027200 Insert Socket SW 19 389 031530 Spray Nozzle (0,1F 110) 396
072230 Magnetic Bitholder for SCU 7-9 388 102033 Steel Traverse 140/220 ASW 397
031001 Plywood Repair Ø 40mm 391 102031 Stripping Cart ASW 465, complete 397
031000 Plywood Repair Ø 60mm 391 035500 Stripping Cart, Alu 397
024920 Power-Screwdriver DSSE 642 388 102400 Swivel Coupling DK 38/48, galv. 394
105317 Pre-cutter HM (Drill Ø 40mm) 391 017010 Swivel Coupling DK 48/48, galv. 394
105331 Pre-cutter VHM (Drill Ø 60mm) 391 017000 Swivel Coupling DK 60/48, galv. 394
Ratchets 389 710290 T-Head Bolt M14x98/110, galv. 394
105318 Reverse Plate HM (Ø 40mm) 391 102030 Toe-Board Set 70/190 ASW 397
105311 Reverse Plate Twist Drill HM Ø 40 mm 391 102035 Vertical Frame 70/ 90 ASW 397
105326 Reverse Plate Twist Drill VHM Ø 60mm 391 102034 Vertical Frame 70/120 ASW 397
105330 Reverse Plate VHM 28,5 (Ø 60mm) 391 102037 Wind Security Clip 60 ASW 397
044890 Rivet Gun BZ 390
106081 Router DW 625-E 391
072170 Socket SW 13-1/2" l=80mm 388
029620 Socket SW 19-1/2" 389 15.30 Screws, Nails, Pins
102784 Socket SW 24-1/2" 389
029650 Socket SW 27-1/2" 389
102785 Socket SW 36-3/4" 389 103606 Anchor Bolt PERI MMS 20x130 401
029630 Socket SW 46-1" 389 018060 Cotter Pin 4/1, galv. 402
029640 Socket SW 55-1" 389 022230 Cotter Pin 5/1, galv. 402
031480 Socket Wrench SW 36, cromatized 389 018280 Double Head Nail l=65mm 403
Spanners 389 F.H. Bolts 401
108129 Tie Rod Spanner DW 15 390 Hex. Bolts ISO 4014 400
031070 Tie Rod Wrench 15, galv. 390 Hex. Bolts ISO 4016 401
031050 Tie Rod Wrench 20, galv. 390 Hex. Bolts ISO 4017 400
Torx 391 024090 Hex. Nut DIN 934 M 8, galv. 401
072210 Universal Power Srewdriver SCU 7-9 388 Hex. Nuts ISO 4032 401
Coach Screws DIN 571 403
037160 Locking Pin Ø 20x205, galv. 399
Pins 399
15.20 Accessories 019560 Ring Screw M 16, galv. 402
Rivets 402 15.10
Screwnails 403 -
102807 Ballast 10 kg ASW 397 710262 Selftapping Screw 5.5x45-TX30, galv. 403 15.30
018310 Beam Connector, galv. 395 Spax Screws 403
054240 Chamfer Strip 15/15 l=2.70m 392 TSS-Torx 403
Chamfer Strips 392 021640 Waler Bolt for RUNDFLEX, galv. 399
030790 Clamp Lock 393 Washers 402
024000 Compensation Washer 16, galv. 395
024180 Compensation Washer 20, galv. 395
102028 Diagonal Brace 210 ASW 397
017020 Double Coupler NK 48/48, galv. 394
017030 Double Coupler NK 60/48, galv. 394
102027 Double Handrail 190 ASW 397
102026 Entry Platform 190 ASW 397
710340 Flanged Nut M14 SW19, yellow 394
102025 Folding Base Unit 160/190 ASW 397
030260 Formwork Joint SSP l=2.50m 392
100678 Frame Pallet USP 104 397
018290 Framing Clip, galv. 395
024890 Hook Strap HB 2 for VT, galv. 395
024880 Hook Strap HB for VT, galv. 395
102029 Horizontal Brace 190 ASW 397
100707 Lashing 25x5750mm 397
031675 PERI Hotknife 398

387
Power Tools, Tools
Weight kg Item no.

Universal Power Screwdriver SCU 7-9

with adjustable coupler 1,60 072210
Clockwise and anti-clockwise rotation
Voltage: 230V
Power output: 400W
max. tightening torque: 28Nm

Accessories:
Bit holder for SCU 7-9 0,40 072220
Magnet holder for SCU 7-9 0,43 072230
Depth control stop for SCU 7-9 0,11 072240
Torx blade TX 30 0,005 072140

Power-Screwdriver DSSE 642 2,70 024920

Two-speed power screwdriver
with reverse action.
Voltage: 230V
Power: 600W
Rev. per min.: 0-600 bzw. 0-1800/min
max. tightening torque: 30Nm
Version with 110 voltage upon request.

Accessories:
Bit Holder for Screwdriver 0,40 072090
Magnetic Holder 0,025 072120
Depth Chuck for Screwdriver 0,11 072110
Bit Point TX 30 0,005 072140

Bit Point TX 30 0,005 072140

Bit for TSS-Torx Screw.

Electric Power Wrench M14, ASB 636 2,86 072150

Electric Power-Wrench
with reverse action.
Voltage: 230V
Power: 230W
max. tightening torque: 100Nm
Socket 1/2”
Version with 110 voltage upon request.

Accessories:
Extension 1/2” L = 250mm 0,34 072160
Socket SW 13-1/2” L = 80mm 0,10 072170

Ratchet Wrench 1/2” 0,56 072180

Length approx. 270mm

Extension 1/2" L = 250mm 0,34 072160

Socket SW 13-1/2" L = 80mm 0,10 072170

388
 Weight kg Item no.

Allen Key 14mm, long 0,45 027212

For unscrewing M24, M30 and M36
anchor positioning studs.

90° Socket spanner SW 36 2,46 031480

For tightening and loosening scaffold
M24/DW15 climbing cones or M24/DW20
screw-on cones.
Length approx. 500mm

Ratchet Lever SW 17 1,76 027100

For easy moving of the FW Carriage.
Ratchet Lever SW 19 1,76 027180
For easy moving of the CB and SKS Carriage.

Spare parts:
Insert Socket SW 17 0,10 027190
Insert Socket SW 19 0,10 027200

Ratchet Spanner SW 24 "Combi" 1,00 021790

For adjusting RUNDFLEX panels and
cantilevered parapet platforms.
Length approx. 500mm.

Spanner SW 80 3,30 027210

For TR 60/9 at Brace Frames SB.
Spanner SW 70 2,30 027213
For unscrewing positioning coupling DW.
Spanner SW 46 0,76 027211
For undoing anchor release plate.

Anchor Spanner 20/26 2,32 031490

For unscrewing anchors DW20 and DW26.

15.10
-
15.30
Ratchet Wrench 3/4" 2,65 051764
Length approx. 625mm
Ratchet Wrench 1" 5,30 029610
Length approx. 815mm

Socket SW 19-1/2" for M12 0,075 029620

Socket SW 24-1/2" 0,095 102784
Socket SW 27-1/2" for M16 0,16 029650
Socket SW 36-3/4" 0,45 102785
Socket SW 46-1" for M30 0,58 029630
Socket SW 55-1" for M36 1,00 029640

Adapter 1/2"-3/4" 0,13 102786

For using Socket SW 36-3/4"
on ratchet wrench 1/2".

389
 Weight kg Item no.

Tie Rod Wrench 15, galv. 1,26 031070

Enables one person to tighten
Tie Rod DW15.
Tie Rod Wrench 20, galv. 1,69 031050
Enables one person to tighten
Tie Rod DW20.

Tie Rod Spanner DW 15 3,48 108129

ø 25

74
130 1096

Rivet Gun BZ 48 L=500mm 2,12 044890

For Rivets ø 5mm.

Drill Bit HSS DIN 338 ø 5,1mm 0,010 727112

For Rivets ø 5mm.

Knot-hole borer ø 20mm 0,040 031040

ø 25mm 0,055 031080
ø 35mm 0,090 031030
ø 40mm 0,125 031100
ø 50mm 0,160 031120

Form Lining Drill Bit ø 20x1000 0,62 031090

390
 Weight kg Item no.

Router DW 625-E 5,10 106081

Voltage: 230V
Power: 200W
rpm: 8000-20000/min-1

Reverse Plate Twist Drill VHM ø 60 0,26 105326

63 ø 60

ø12
➀
Accessories:
Reverse plate VHM ø 60 (2x) 0,012 105330 ➀
Centering point VHM ø 60 (1x) 0,003 105328 ➁
Pre-cutter VHM ø 60 (4x) 0,003 105331 ➂ ➁ ➂ ➃ ➄ ➅
Torx screw reverse plate VHM (4x) 0,002 105327 ➃
Torx screw centering point VHM (1x) 0,002 105346 ➄
Torx screw pre-cutter VHM (4x) 0,002 105347 ➅

Reverse plate HM ø 40 0,145 105311 76 ø 40

ø12

15.10
-
15.30
➀

Accessories: ➁ ➂
Reverse plate HM ø 40 (1x) 0,018 105318 ➀
Pre-cutter HM ø 40 (2x) 0,008 105317 ➁
Torx reverse plate ø 40, Pre-cutter ø 40 (4x) 0,002 105367 ➂

Plywood Repair ø 60mm 0,007 031000

Plywood Repair ø 40mm 0,005 031001
For repairing damage to the
formlining.

391
Assembling Accessories
Weight kg Item no.

Formwork Joint SSP 21/20 L = 2,50m 0,50 030260

Formwork Joint SSP 21/40 L = 3,00m 1,23 101706
Plastic.
For easy stripping of shaft forms.

34 65

21

21
max 20 max 40

Chamfer Strip with Flange L = 2,50m 0,47 031200

Plastic.
15

L = 3,50m 0,67 105448

15
L = 2,75m 0,52 037610
L = 1,25m 0,23 037600

20
L = 0,50m 0,10 037590
2,7

Chamfer Strip 15/15 L = 2,70m 1,90 054240

For TRIO Column Formwork.

7 x 300 = 2100
300 300

115

150
170
90
30

2700 67

RAPID Chamfer Strip L = 3,00m 0,32 037210

For fixing plywood to the RAPID
Column Frame.
15 20
5
15

20

35

Sealing Tape 20x5mm, L = 10,0m 0,022 037620

For sealing formlining joints, etc.

392
 Weight kg Item no.

Plug ø 20mm 0,002 030290

For sealing tie holes ø 20mm,
which are not required.
Supplied in packs of: 500pcs. 14

ø 21

ø 23
Plug ø 20/24mm 0,003 030300
For sealing tie holes ø 20 to 24mm,
which are not required.
20
Supplied in packs of: 250pcs.

ø 19

ø 21

ø 28
Plug ø 25mm TRS 0,004 030320
For sealing tie holes ø 25mm,
which are not required and for 21
TRIO Column Formwork.

ø 25
ø 23

Plug ø 26mm Bolt Anchor Sleeve M24 0,005 026250

For sealing tie holes ø 26mm,
21
which are not required and for
Bolt Anchor Sleeve M24.
ø 24

ø 26

Clamp Lock 0,43 030790

For tying with Mild Steel Rod 40
ø 5mm to ø 10mm.
15.10
-
15.30
100

Spanner for Clamp Lock, galv. 1,5 030820

For tying with Mild Steel Rod
ø 5mm to ø 10mm.
195 retracted

spindle travel about 70

393
 Weight kg Item no.

Standard Coupling NK, galv.

NK 48/48mm, galv. 1,12 017020
NK 60/48mm, galv. 1,40 017030

Width across flats 19

Swivel Coupling DK, galv.

DK 48/48mm, galv. 1,40 017010
DK 60/48mm, galv. 1,54 017000
DK 33,7/38mm, galv. 1,10 017070
DK 38/48mm, galv. 1,10 102400

Width across flats 19

Screw-On Coupling AK 48, galv. 0,85 017040

With welded Pin M20x32.

Width across flats 19mm and 30mm.

T-Head Bolt 0,12 710290

M14x98/110, galv.
Spare bolt for scaffold tube couplers and
brackets UCB, etc. 110

75
M14
24

Flanged Nut M14 SW19, yellow 0,032 710340

M14

SW19

Scaffold Tube, alu, ø 48,3x4,0, special length 1,50/m 026416

Scaffold Tube, steel, ø 48,3x3,2, galv.
L = 1,0m 3,55 026411
L = 2,0m 7,10 026412
L = 3,0m 10,65 026413
L = 4,0m 14,20 026414
L = 5,0m 17,75 026419
L = 6,0m 21,60 026418
Special length 3,55/m 026415
Scaffold Tube Cutting Costs 026417

394
 Weight kg Item no.

Compensation Washer, galv.

When using hex. bolts M16 or M20
at the elongated hole of Steel Waler SRZ
or VARIO Couplings. 12,5
Compensation Washer 16, yellow galv. 0,17 024000 58
6
Compensation Washer 20, galv. 0,17 024180

46
ø 16,5 / ø 20,5

Framing Clip, galv. 0,098 018290

For connecting perpendicular girders
or timbers.

185
ø 4,8

98
36

Beam Connector, galv. 1,80 018310

For connecting perpendicular girders
or timbers. 221 62

Complete with:
Captive Wingnuts (2pcs.)
min. 200 - max. 280

320

174
Rd 12 x 1/10"
(DIN 405)
50

214

15.10
-
15.30

Hook Strap HB for VT, galv. 0,48 024880

For connecting VT-Girders to
Steel Waler SRZ profile U100 and U120. 78
Hook Strap HB 2 for VT, galv. 0,48 024890
For connecting VT-Girders to 70
Steel Waler SRZ profile U140.

48

152 (U 100)
162 (U 120)
172 (U 140)

395
PERI BIO Clean, PERI Clean
Weight kg Item no.

PERI Bio Clean

Release Agent for all types of formwork.
- Rapidly biologically degradeable.
- Based on mineral oils.
- Class 1 on German water pollutant scale.
(WGK 1)
Release Agent Bio Clean 20L 0,91/L 031440
Release Agent Bio Clean 208L 0,91/L 031455

For further information see

product information PERI Bio Clean.

Consumption:
1 litre covers 50 to 90m2 of formwork
(depending on formwork surface)

PERI Clean
Release Agent for all types of formwork.
Based on mineral oils.
Cleans and protects.
Can be used down to -15C degree.
Class 1 on German water pollutant scale.

Release Agent PERI Clean 20L 0,92/L 031420

Release Agent PERI Clean 208L 0,92/L 031435

For further information see

product information PERI Clean.

Consumption:
1 litre covers 50 to 90m2 of formwork
(depending on formwork surface)

Pressure Sprayer 4,44 031520

For spraying formwork surfaces evenly
with PERI BIO Clean or PERI Clean.
Capacity: 5 litre

Spare Part:
Spray Nozzle (0,1F 110) 0,064 031530

396
 Weight kg Item no.

Stripping Cart ASW 465 363,00 102031

Complete with:
1 Steel traverse 140/220 ASW (1x) 32,60 102033
consisting of 3 parts

1150
2 Folding base unit 160/190 ASW (1x) 18,60 102025
3 Vertical frames 70/90 ASW (6x) 4,40 102035
4 Vertical frames 70/120 ASW (6x) 4,90 102034
5 Entry platforms 190 ASW (2x) 14,80 102026 2360 1100
6 Toe-board set 70/190 ASW (1x) 8,00 102030
7 Double handrails 190 ASW (4x) 5,30 102027
1
8 Diagonal braces 210 ASW (3x) 2,40 102028
9 Horizontal braces 190 ASW (2x) 2,30 102029
10 Wind security clip 60 ASW (8x) 0,06 102037
11 Ballast 10kg ASW (12x) 10,00 102807

Packed in:
Ring pallet USP 104, galvanized 65,60 100678
Complete with:
Lashing strap 25x5750mm (1x) 0,50 100707
Scaffold Tube steel ø 48,3x3,2, L = 1,0m 3,55 026411 2
as Ring extensions (6x)
Max. platform height = 4,65m
Max. working height = 6,65m
Platform height alterations 4
∆ = 300mm 3

5 7

8
6
9
Ring pallet USP 104, galv.
Observe operating instructions!
10 11
Lifting device to BGR 500
Permissible load: 1200kg

Stripping Cart, Alu 77,00 035500

Platform height: up to 2,00m 15.10
Permissible load: 100kg/m2 -
15.30
handrail height 980

250
3035

platform height 2000

ø 48

1800 750

397
Peridrain Fabric and Accessories
Weight kg Item no.

Peridrain Fabric b = 1,50m, L = 25,0m 13,88 031674

Peridrain Fabric b = 2,80m, L = 25,0m 25,90 031673
Drainage fabric for improving the w/c ratio
and achieving a high-quality concrete
finish free from bug holes and voids.

PERI Hotknife 1,00 031675

Cuts and seals the cut edges of
Peridrain fabric.

Tension: 220V

Peridrain Edge Strip Clip 0,21 102099

For attaching the Peridrain edge strip to
78

the side edge sections of RUNDFLEX Spax Screw Peridrain Edge Strip
or TRIO panels. 3.5x45 Clip

72

Peridrain Edge
Strip
80

Peridrain Clip 0,12 102098 Peridrain Clip

For securing Peridrain fabric to the top
and bottom edge sections of TRIO panels.
78

63
40

Peridrain Edge Strip 0,32 102110 3000 12

Finply 12mm, L = 3,00m.
121

Spax Screw SK 3.5x45 0,005 102109

SK cross-slotted screw. For fixing the
edge strip to the edge strip clip.

398
Screws, Bolts, Nails, Pins
Weight kg Item no.
129
Pin ø 14x107, galv. 0,15 027990 110 4

ø 14

ø 26
ø5

110
Pin ø 16x65/86, galv. 0,17 018050 88
67 5

ø 25
ø 16
ø 5,5

60
Pin ø 16x42, galv. 0,10 027170 45

ø 25
ø 16
ø5

160
Pin ø 25x160 for KG, galv. 0,61 026200
135 10

ø 44
ø 25
ø 6,5

Pin ø 19x165, SB-TRIO/SE, galv. 0,40 027690 145

20

ø 35
ø 19

8
15
165 8

140
Pin ø 20x140, galv. 0,33 105400
40 93

ø 20

ø 23
ø8

42
Pin ø 20x42, QUATTRO, galv. 0,10 724500
8,5 25 ø 20

ø5

Pin for GRV, galv. 1,94 022210 200

148 10
ø 40

ø 60

ø6

15.10
ø 40 -
Waler Bolt, galv. for RUNDFLEX 1,23 021640 15.30
Complete with: Cotter Pin 5/1 (1x).
150
75
100

ø 35
FS 5/1

125
Locking Pin ø 20x205, galv. for RAPID 0,74 037160
ø 20

Complete with: Cotter Pin 5/1 (1x)

205

ø 34
120

20

FS 5/1

399
 Weight kg Item no.

Hex. Bolt ISO 4014-8.8, galv.

Conforms to the old DIN 931-8.8.

M 8x 60 0,031 710284
M 8x100 0,050 710285
M 8x140 0,066 722859
M12x 60 0,067 710221
M12x 80 0,084 710220
M12x100 0,10 750330
M16x 60 0,12 710299
M16x 80 0,14 710222
M16x100 0,18 710219
M16x110 0,20 710233
M16x130 0,21 710232
M16x140 0,25 722169
M16x160 0,28 780155
M20x 80 0,26 024900
M20x 90 0,34 710226
M20x100 0,30 024910
M20x130 0,36 711078

Hex. Bolt ISO 4014-10.9, galv.

Conforms to the old DIN 931-10.9.
High strength bolts for
scaffold anchor systems.

M24x 70 0,33 026430

M24x 80 0,36 026220
M24x120 0,54 029560
M30x 90 0,71 029570
M30x130 0,92 029540
M36x130 1,40 029550

Hex. Bolt ISO 4017-8.8, galv.

Conforms to the old DIN 933-8.8.
With full-length thread.

M12x25 0,037 710266

M12x40 0,047 710224
M16x30 0,077 710231
M16x45 0,097 710225
M20x50 0,18 780357
M24x35 0,23 710265
M30x70 0,59 029420
M36x70 0,93 029430

Hex. Bolt ISO 4017-10.9, M24x50 0,28 026290

Hex. Bolt ISO 4017-10.9, M24x80 0,36 706489
Conforms to the old DIN 933-10.9.
High strength bolts for scaffold anchor
systems.

Further bolts and screws upon request.

400
 Weight kg Item no.

Hex. Bolt ISO 4016-4.6 w. N., galv.

Conforms to the old DIN 601.
For light-duty use.
Including nut.
M 8x 25 0,022 780353
M12x 40 0,060 035440
M12x120 0,13 070100
M12x140 0,14 018330
M12x180 0,18 027340
M16x140 0,28 018320
M16x160 0,31 018350
M16x260 0,45 027050
M16x280 0,48 103740

F.H. Bolt DIN 603 w. N., galv.

Including nut.
L [mm]
M 6x180 0,060 051650 24
M 8x 45 0,028 710295 22
M 8x 60 0,030 710326 22
M 8x 65 0,036 710709 22 L
M 8x 70 0,038 024140 70
M 8x 80 0,035 723439 22
M 8x 90 0,040 750076 22
M 8x100 0,050 710240 80
M 8x125 0,058 024360 125
M 8x140 0,070 725462 28
M 8x160 0,074 024380 160
M 8x200 0,090 024390 150
M 8x250 0,11 024410 150

Anchor Bolt PERI MMS 20x130 0,33 103606

Re-usable anchor bolt for fixing
SW 30
push-pull props, bracing etc.
Perm. loads: see product information.

Drill depth
min 140
130

20

Hex. Nuts ISO 4032-8, galv.

Conform to the old DIN 934-8.

M 8 0,005 024090 (self-cleaning) 15.10

M12 0,017 710330 -
M16 0,033 710229 15.30
M20 0,064 710334
M24 0,10 022250

Hex. Nuts ISO 4032-10, galv.

Conform to the old DIN 934-10.

M16 0,033 710238

M24 0,11 706488
M30 0,22 710336

Hex. Nuts ISO 7042-8, galv.

Self locking.

M 6 0,001 722086
M 8 0,006 711071
M10 0,011 780356
M12 0,017 710381
M16 0,030 070890
M20 0,065 781053

401
 Weight kg Item no.

Washers ISO 7089-200 HV, galv.

Conform to the old DIN 125 Form A.

A 8 0,002 780354
A 12 0,006 780702
A 14 0,009 725574
A 16 0,011 711074
A 20 0,017 706454

Washers ISO 7093-1 200 HV, galv.

Conform to the old DIN 9021.
With large bearing surface.

A 12 0,027 750350
A 16 0,041 710886

Rivet DIN 7337

A 4,8x23, alu 0,001 722083

A 5x12, alu 0,001 780304
A 6x10, steel 0,003 722318
B 5x20, GAV 0,005 780305
B 5x25, alu 0,006 780302
B 5x30, alu 0,004 730050

Stair Tower Eye Bolt M16, galv. 0,28 019560

14
Anchoring with dowels M16. ø 63
ø 35

M 16 ø 35 62
27

Cotter Pin 5/1, galv. 0,033 022230

For Pins ø 25 to ø 40mm.
Cotter Pin FS 4/1, galv. 0,030 018060
For Pins to ø 25mm.
ø4/5

402
 Weight kg Item no.

TSS-Torx, galv.
For Torx-Bits TX 30. Self-tapping.
40

ø 4,3
6x40 0,005 024540
6x60 0,008 024470

ø 12

ø6
6x80 0,010 024690
80 (60) (40)
Torx 30

TSS-Torx 6x60, galv., magazine 0,010 024670

For magazine Power Screw Driver.

TSS-Torx, galv.
For Torx-Bits TX 30. Self-tapping.
18

ø 5,5
8x38 0,009 103444

ø 18

ø8
8x44 0,011 104892
8x58 0,015 104647
78 (58) (44) (38)
8x78 0,020 103443 Torx 30

Self tapping Screw ISO 15482 5.5x45, galv. 0,007 710262

For Torx-Bits TX 30. For fixing 45
edge profiles to the plywood.

ø 11,5

ø 5,5
Torx 30

Screwnail, galv.

40mm 0,001 024530

70mm 0,005 024310
90mm 0,010 024350

Coach Screw DIN 571, galv.

6x 20 0,005 029440
6x 80 0,014 051640
8x 60 0,023 024270
8x 80 0,027 024260
8x100 0,032 024490 15.10
8x130 0,044 024500 -
8x140 0,047 024510 15.30
8x160 0,052 024520

Double Headed Nail L = 65mm 1,00 018280

Delivered in packs of: approx. 1000
75
10

ø 3,1

Spax SK TX 30, yellow galv.

For Torx-Bits TX 30. Self-tapping.

8x 20 0,005 024550
6x100 0,012 024950
6x120 0,015 024960
6x140 0,017 024970
6x160 0,019 024980
6x180 0,021 024990

403
404
16.10 Paletts, Stopend Systems 16.20 ASP Box-Out Formwork

Page Page

103606 Anchor Bolt PERI MMS 20x130 407 065100 Corner Reveal ASP, WD 20, 42.7 cm 416
065073 Anchor Chain 3.0kN l=2.5m 409 065101 Corner Reveal ASP, WD 20, 49.0 cm 416
065026 Ashwood Handle L=1180 mm 409 065102 Corner Reveal ASP, WD 20, 70.5 cm 416
065022 Butt Strap 54/30 mm 409 065103 Corner Reveal ASP, WD 20, 193.5 cm 416
065023 Butt Strap 102/30 mm 409 065106 Corner Reveal ASP, WD 24, 42.7 cm 416
065024 Butt Strap 170/30 mm 409 065107 Corner Reveal ASP, WD 24, 49.0 cm 416
030050 Cutting Cost Tie Rod DW 15 / B 15 406 065108 Corner Reveal ASP, WD 24, 70.5 cm 416
065017 Drying Locker Klima TS 2000 409 065109 Corner Reveal ASP, WD 24, 193.5 cm 416
065062 Formwork Bracket-2 406 065112 Corner Reveal ASP, WD 25, 42.7 cm 416
100660 Frame Pallet USP 72 414 065113 Corner Reveal ASP, WD 25, 49.0 cm 416
100678 Frame Pallet USP 104 414 065114 Corner Reveal ASP, WD 25, 70.5 cm 416
035700 Handrail Holder 407 065115 Corner Reveal ASP, WD 25, 193.5 cm 416
034580 Handrail Post HSGP 407 065118 Corner Reveal ASP, WD 30, 42.7 cm 416
108053 Handrail Post RGP 120 407 065119 Corner Reveal ASP, WD 30, 49.0 cm 416
025660 Hardware Box 80x120, galv. 413 065120 Corner Reveal ASP, WD 30, 70.5 cm 416
025670 Hardware Box 80x120, painted 413 065121 Corner Reveal ASP, WD 30, 193.5 cm 416
065019 HM Concrete Scraper l= 900, b=102 409 065130 Cutting Cost ASP 417
065018 HM Concrete Scraper l=1180, b= 54 409 018280 Double Head Nail l=65mm 417
065020 HM Concrete Scraper l=1180, b=102 409 065124 Framing Member ASP, l=2.50m 417
065021 HM Concrete Scraper l=1180, b=170 409 065125 Framing Member ASP, l=3.00m 417
065025 HM Turnover Board 16/16 mm 409 065126 Framing Member ASP, l=3.50m 417
065067 Lid for Wire Crate Pallet 80x120 413 065128 Stiffening Panel ASP, 60.0x125.0 cm 417
065080 Pallet HS 120x90, galv. 411 065129 Stiffening Panel ASP, 60.0x150.0 cm 417
065081 Pallet HS 150x90, galv. 411 065127 Stiffening Panel ASP, 87.0x 74.5 cm 417
061510 Pallet Lifting Trolley 1500mm 412 065104 Striking Strip ASP, WD 20, 70/21 416
106939 Pallet RP 110x125, painted 412 101856 Striking Strip ASP, WD 20, 70-250/21 416
103434 Pallet RP/2 80x120, galv. 412 065110 Striking Strip ASP, WD 24, 70/21 416
103429 Pallet RP/2 80x150, galv. 412 101857 Striking Strip ASP, WD 24, 70-250/21 416
061500 Pallet SD 150x 75, galv. 410 065116 Striking Strip ASP, WD 25, 70/21 416
061530 Pallet SD 150x225, galv. 410 101859 Striking Strip ASP, WD 25, 70-250/21 416
065050 Pallet ST 100/2, galv. 411 065122 Striking Strip ASP, WD 30, 70/21 416
065042 Peg 407 101861 Striking Strip ASP, WD 30, 70-250/21 416
065060 Plug for Stopend Sleeve DW 15 406 065105 Vertical Reveal ASP, WD 20, 193.5 cm 416
065063 Slab Stopend Bar 105 406 065111 Vertical Reveal ASP, WD 24, 193.5 cm 416
066094 Stacking Device DOMINO, galv. 411 065117 Vertical Reveal ASP, WD 25, 193.5 cm 416
023390 Stacking Device TRIO, galv. 410 065123 Vertical Reveal ASP, WD 30, 193.5 cm 416
065039 Stopend Sleeve DW 15 406
065040 Stopend Trestle 407
030150 Tie Rod B 15 l=0.30m 406
030740 Tie Rod B 15 Spec. Length 406
065051 Trestle P 80 408
065074 Turnbuckle 3.0kN, M 12 409
065045 Wall Clamp 55 408
065076 Wall Clamp 75 408
065046 Wall Clamp 105 408
030110 Wingnut Counterplate DW 15, galv. 406
065068 Wire Crate Pallet 80x120, galv. 413
065016 Wire Crate Pallet 80x120, painted 413

16.10
-
16.20

405
Edge Formwork Systems, Site Equipment, Pallets
Weight kg Item no.

Formwork Bracket-2 9,93 065062

To form small slab projections and
vertical slab stopends.
Complete with:

458
Captive Wingnut. 716

min 15
max 488

40

110
245
655
Accessories:

46

55
Handrail Post HSGP 3,54 034580

Slab Stopend Bar 105 6,58 065063 138

To form vertical slab stopends. 40

Complete with:
Captive wingnut and spindle.

90

150
6x80=480
ø 20
1204

90

310
40

Accessories:
Handrail Post HSGP 3,54 034580

Stopend Sleeve DW15 0,075 065039

Complete with:
Fixing lug for Stopend Sleeve. 74
52
ø 24

ø 42

Accessories:
Plug for Stopend Sleeve DW15 0,001 065060 SW 32

Anchor Tie Rod B1 L = 0,30m 0,42 030150

Weldable!

300
Anchor Tie Rod DW15 Spec. Length 1,55/m 030740
Cutting Cost Tie Rod DW15 / B15 030050
Permissible load: 85kN

Wingnut Counterplate DW15, galv. 0,80 030110

50
SW 27
96

106

Permissible Load to DIN 18216: 90kN

406
 Weight kg Item no.
35
Handrail Post HSGP 3,54 034580 65
Safety handrail for Formwork Bracket-2 and

120
Slab Stopend Bar 105.

560

1050

1300
Handrail Holder 9,79 035700 190 65
For easy and quick clamping to concrete slabs
for supporting handrails.

120
Adjustable from 20 up to 420mm.

460

995
min 20

max
420
185
70

35
Handrail Post RGP 120 6,94 108053
For guardrails on slab edges balconies,
stringers etc. Max. width of influence e = 2,0 m

1195

160

Accessories: ø 21 ø9
ø 21
130

ø 21
Anchor Bolt
ø 36
PERI MMS 20x130 0,33 103606

Stopend Trestle, adjustable 6,82 065040

16.10
To form ground slabs up to 600mm deep.
-
16.20
Accessories:
Peg 1,12 065042
To fix the Stopend Trestle to the ground.
ø 30 66
ø5
45

600
455

25

ø 35 ø 35
25

140 85 min 450

max 650
200

407
 Weight kg Item no.

Wall Clamp 55 5,24 065045

When used at the max. pour height of 300mm
a max. spacing of 1,2m is recommended for 758
foundations.

80 80 80
300
ø5

30

20
max 550

Wall Clamp 75 6,44 065076

When used at the max. pour height of 400mm
a max. spacing of 1,0m is recommended for
foundations. 958

80 80 80 80
400 ø5

20
max 750 30

Wall Clamp 105 13,60 065046

When used at the max. pour height of 500mm
a max. spacing of 0,8m is recommended for
foundations.
1200

140
ø6
500

140
ø 25

140
80

20
42
max 1050

Trestle P 80 18,50 065051

To be used as a single Trestle or in
combination to form a large area scaffold.
280 1000
100

765

800 1252

408
 Weight kg Item no.

Drying Locker Klima TS 2000 56,00 065017

Exhaust air dryer for drying wet clothes.
With clock timer and continuous
temperature control unit.
1500W, 230V

1915
595 610

HM Concrete Scraper
With an ash wood handle, HM Turnover Board,
and Butt Strap made of tool steel.

HM Concrete Scraper L = 900, b = 102 1,20 065019

HM Concrete Scraper L = 1180, b = 54 1,40 065018
HM Concrete Scraper L = 1180, b = 102 1,80 065020
HM Concrete Scraper L = 1180, b = 170 2,20 065021

b
L

Spare parts for HM Concrete Scraper:

Butt Strap 54/30mm 0,035 065022
Butt Strap 102/30mm 0,070 065023
Butt Strap 170/30mm 0,120 065024
HM Turnover Board 16/16mm 0,018 065025
Wood Handle ash tree L = 1180mm 1,03 065026 16.10
-
Anchor Chain 3,0kN L = 2,5m 1,37 065073
16.20
Galvanized.
14

2500

Permissible Tension Load: 3kN.

Turnbuckle 3,0kN, M12 0,45 065074

Galvanized.
16

min. 220
max. 300
Permissible Tension Load: 3kN.

409
 ! Important safety note!
When stacking light, large surface items outdoors
Weight kg Item no. the maximum stacking height must be reduced.

Pallet SD 150x225, galv. 83,60 061530

For 48 SKYDECK Panels 150x75.

250
1550
2310

Stacking height

120
120
190
Lifting device to
Follow Instructions BGR 500
for Use! Perm. load: 750kg

Pallet SD 150x75, galv. 77,80 061500

For 14 SKYDECK Panels 150x75.

1720

1970
120

60 580 60
1630
640

760

Lifting device to
Follow Instructions BGR 500
for Use! Perm. load: 1000kg

Stacking Device TRIO, galv. 7,06 023390

For handling 2 to 5 TRIO panels.
Follow Instructions for Use!
790

2nd to 5th panel with

formlining facing up
1st panel with
formlining facing down

Lifting device to
146

BGR 500
120

Perm. load: 750kg 150

410
 ! Important safety note!
When stacking light, large surface items outdoors
Weight kg Item no. the maximum stacking height must be reduced.

Pallet HS 120x90, galv. 65,00 065080

Pallet HS 150x90, galv. 66,60 065081 1440 1110
For HANDSET Panels. 1240 910

820
1070

120
580
1580

1440 1110
1240 910

820
1070
Lifting device to

120
Follow Instructions BGR 500 580
for Use! Perm. load: 750kg

Pallet ST 100/2, galv. 124,00 065050

For Stacking Tower ST 100.

2480
2280
400

970
140

1350

1100
900
70

40

Lifting device to
Follow Instructions BGR 500
for Use! Perm. load: 1000kg

16.10
Stacking Device DOMINO, galv. 8,44 066094 -
For stacking and lifting 2 to 8 DOMINO
panels.
16.20
1150

2nd to 8th panel with

formlining facing up

1st panel with

formlining facing
down
Lifting device to
146

100

Follow Instructions BGR 500

for Use! Perm. load: 250kg 150

411
 ! Important safety note!
When stacking light, large surface items outdoors
Weight kg Item no. the maximum stacking height must be reduced.

Pallet RP-2 80x120, galv. 34,40 103434

Pallet RP-2 80x150, galv. 41,40 103429

1280/(1580) 880

1080/(1380) 680

600
850
100
1200/(1500) 800

Lifting device to
Follow Instructions BGR 500
for Use! Perm. load: 1500kg

Palett RP 110x125, painted 19,90 106939

1320 1150
1145 975

410
565

155

95

Lifting device to
Follow Instructions BGR 500
for Use! Perm. load: 750kg

Pallet Lifting Trolley 1500mm 110,00 061510

Length of Forks: 1550mm
Support Width of Forks: 520mm
Lifting Range: 85 to 195mm
Safe Working Load: 2000kg

412
 ! Important safety note!
When stacking light, large surface items outdoors
Weight kg Item no. the maximum stacking height must be reduced.

Mesh Pallet, 80x120, galv. 65,80 025660

Mesh Pallet, 80x120, painted 65,80 025670
Capacity: about 0,28m3

1240 835

500

100
760 590

Lifting device to
Follow Instructions BGR 500
for Use! Perm. load: 1500kg

Crate Pallet 80x120, galv. 85,10 065068

Crate Pallet 80x120, painted 85,00 065016
Volume approx. 0,75m3.

1240 835

970

100

760 588

Lifting device to
Follow Instructions BGR 500
for Use! Perm. load: 1500kg
16.10
-
Lid for Mesh Pallet 80x120 9,48 065067
16.20
1100 37
802
745

1155 20

413
 ! Safety advise!
If the material to be stacked outdoors is light weight
Weight kg Item no. and bulky please reduce the number of stacked pallets.

Pallets USP, galv. USP 72 60,50 100660

USP 104 65,60 100678
Complete with:
Lashing strap and 6 post extensions.
For stacking:
36 T-frames UVT and tube UV 165,
or base frames UVF and L-frames UVL.
Maximum stacking height:
3 high with extension
6 high without extension

1085 (1405)
1028 (1348)

1140
590
832
Spare parts:
Lashing strap, 25 x 5750 0,50 100707
Scaffold tube, 1,0 m 3,6 026411

414
 16.10
-
16.20

415
ASP Box-out
Weight kg Item no.

Corner Reveal ASP

Wall thickness 200mm L B
WD 20/ 427mm 3,63 065100 427 200
WD 20/ 490mm 4,10 065101 490 200
L
WD 20/ 705mm 5,72 065102 705 200
20
WD 20/1935mm 14,90 065103 1935 200
Wall thickness 240mm

20 150
WD 24/ 427mm 3,86 065106 427 240
WD 24/ 490mm 4,37 065107 490 240
WD 24/ 705mm 6,08 065108 705 240
WD 24/1935mm 15,90 065109 1935 240 B
Wall thickness 250mm 150
WD 25/ 427mm 3,92 065112 427 250
WD 25/ 490mm 4,43 065113 490 250
WD 25/ 705mm 6,16 065114 705 250
WD 25/1935mm 16,10 065115 1935 250
Wall thickness 300mm
WD 30/ 427mm 4,21 065118 427 300
WD 30/ 490mm 4,75 065119 490 300
WD 30/ 705mm 6,61 065120 705 300
WD 30/1935mm 17,20 065121 1935 300

Vertical Reveal ASP

B
WD 20 14,60 065105 200
WD 24 15,40 065111 240
WD 25 15,60 065117 250
WD 30 16,60 065123 300

1935
1915

170
150

Striking Strip ASP

70
B
WD 20, 70/21 0,15 065104 200
21

WD 24, 70/21 0,18 065110 240

WD 25, 70/21 0,19 065116 250
WD 30, 70/21 0,23 065122 300
B

Striking Strip ASP max 250

For cutting special length. min 70
B
21

WD 20, 70 - 250/21 0,54 101856 200

WD 24, 70 - 250/21 0,65 101857 240
WD 25, 70 - 250/21 0,68 101859 250
WD 30, 70 - 250/21 0,82 101861 300
B

416
 Weight kg Item no.

Stiffening Panel ASP

L B
ASP 870 x 745mm 6,60 065127 870 745
ASP 600 x 1250mm 8,00 065128 600 1250
ASP 600 x 1500mm 9,60 065129 600 1500

B
Framing Member ASP
L
2,50m 13,40 065124 2500
3,00m 16,10 065125 3000
3,50m 18,80 065126 3500

149
L 150

Cutting Cost ASP 065130

For special length of 16.10
Striking strip etc. -
16.20
Duble Headed Nail L = 65mm 1,00 018280
Delivered in packs of: approx. 1000.
75
10

ø 3,1

417
418
18.10 Plywood

Page

050070 3-S Plywood 21mm 1500x 500mm 422

050080 3-S Plywood 21mm 2000x 500mm 422
050000 3-S Plywood 21mm 2000x 500mm 422
050190 3-S Plywood 21mm 2000x1000mm 422
050040 3-S Plywood 21mm 2500x1000mm 422
052590 3-S Plywood 21mm 2500x1500mm 422
050200 3-S Plywood 21mm 3000x1000mm 422
050030 3-S Plywood 21mm 5000x1000mm 422
052380 3-S Plywood 21mm 5000x2000mm 422
052620 As-Ply 21mm 2500x1250mm 421
052827 FinNa-Ply 21mm 2440x1220mm 422
052828 FinNa-Ply 21mm 2500x1250mm 422
052095 Fin-Ply 9mm 1500x3000mm 420
052150 Fin-Ply 12mm 1500x3000mm 420
052159 Fin-Ply 15mm 1500x3000mm 420
052240 Fin-Ply 18mm 1500x3000mm 420
052260 Fin-Ply 21mm 1250x2500mm 420
052060 Fin-Ply 21mm 1500x2500mm 420
052270 Fin-Ply 21mm 1500x3000mm 420
052070 Fin-Ply 21mm 1500x4000mm 420
052829 Fin-Ply Maxi 20mm 5400x2000mm 420
052823 Fin-Ply Maxi 20mm 7500x2700mm 420
052824 PERI Beto 21mm 625x2500mm 420
052821 PERI Beto 21mm 1250x2500mm 420
052822 PERI Beto 21mm 1500x3000mm 420
052851 PERI Beto-S 21mm 1250x2500mm 420
052820 PERI Birch 21mm 1250x2500mm 420
052831 PERI Spruce 21mm 2500x 500mm 421
052830 PERI Spruce 21mm 2500x1250mm 421
052010 Plywood 4mm 2500x1250mm 421
052020 Plywood 8mm 2500x1250mm 421
052622 Plywood Chin. Film coat. 21mm 1250x2500mm 421
052800 Plywood Elliottis Pine 20mm 2500x1250mm 422
052002 Plywood Poplar 20mm 2440x1220mm 422

18.10

419
Plywood
Weight kg Item no.

Coated plywood for every requirement

Fin-Ply, 21, 18, 15, 12, 9 mm

High-grade coated plywood to meet the highest
requirements.
15/13/11/9/7 cross-bonded birch veneers,
220 g/m2 reinforced phenolic resin on both sides.
Edges sealed all round.

Fin-Ply 21mm 1250x2500 14,25kg/m2 44,53 052260

Fin-Ply 21mm 1500x2500 14,25kg/m2 53,44 052060
Fin-Ply 21mm 1500x3000 14,25kg/m2 64,13 052270
Fin-Ply 21mm 1500x4000 14,25kg/m2 85,50 052070

Fin-Ply 18mm 1500x3000 12,70kg/m2 57,15 052240

Fin-Ply 15mm 1500x3000 10,50kg/m2 47,25 052159

Fin-Ply 12mm 1500x3000 8,80kg/m2 39,60 052150

Fin-Ply 9mm 1500x3000 6,65kg/m2 29,93 052095

Fin-Ply Maxi, 20 mm
High-grade fair-faced concrete plywood for
high-quality surfaces free of joints.
15 cross-bonded birch veneers coated with
400 g/m2 (7,5x2,7m) or 400/220 g/m2
(5,4x2,0m) reinforced phenolic resin on both
sides. Edges sealed all round.

Fin-Ply Maxi 7500x2700 14,25kg/m2 288,56 052823

Fin-Ply Maxi 5400x2000 14,25kg/m2 153,90 052829

PERI Birch, 21 mm
High-grade coated plywood with a robust
construction. 15 cross-bonded birch veneers
coated on both sides with 120 g/m2 phenolic
resin. Edges sealed all round.

PERI Birch 1250x2500 14,25kg/m2 44,53 052820

PERI Beto, 21 mm
Coated plywood for smooth concrete surfaces.
11 alternate veneers of birch and spruce with
birch face veneers coated on both sides with
120 g/m2 phenolic resin. Edges sealed all round.

PERI Beto 625x2500 11,90kg/m2 18,59 052824

PERI Beto 1250x2500 11,90kg/m2 37,19 052821
PERI Beto 1500x3000 11,90kg/m2 53,55 052822

PERI Beto S, 21 mm
Plywood with light absorbent coating for matt,
low-pore concrete surfaces. 11 alternate
veneers of birch and spruce with birch face
veneers. Absorbent MDO coating on front side,
with 120 g/m2 phenolic resin on the rear.

PERI Beto S 2500x1250 12,45kg/m2 38,91 052851

420
 Weight kg Item no.

Coated Plywood

PERI Spruce, 21 mm
Coated plywood with low weight and high
technical data. 15 veneers of Nordic coniferous
wood, coated on both sides with 120g/m2
phenolic resin. Edges sealed all round
Suitable mainly for slab areas.

PERI Spruce 2500x500 10,90kg/m2 13,63 052831

PERI Spruce 2500x1250 10,90kg/m2 34,06 052830

As-Ply, 21 mm
Indonesian coated plywood for standard
requirements for smooth concrete surfaces.
9/11 hardwood veneers coated on both sides
with 120 g/m2 phenolic resin.
Edges sealed all round.

As-Ply 2500x1250 13,00kg/m2 40,63 052620

Chinese Coated Plywood, 21mm

Inexpensive coated plywood, 15 poplar veneers
coated on both sides with 120 g/m2 phenolic
resin. Edges sealed all round.
Suitable mainly for slab areas.

Chinese Coated Plywood

2500x1250 12,0kg/m2 37,5 052622

Facing Formwork, 4 / 8 mm
Indonesian coated plywood for architectural
concrete with smooth surfaces. 3/5 hardwood
veneers coated on both sides with 120 g/m2
phenolic resin. Edges sealed all round.

Facing Formwork, 4mm 2500x1250 2,60kg/m2 8,13 052010

Facing Formwork, 8mm 2500x1250 6,10kg/m2 19,06 052020 18.10

421
 Weight kg Item no.

3-Ply Plywood

3-Ply Plywood, 21 mm (yellow)

Large sheets of plywood with yellow melamine
resin coating, edges sealed all round,
3-ply cross-bonded spruce layers.

3-ply panels 2000x1000 10,50kg/m2 21,00 050190

3-ply panels 2500x1000 10,50kg/m2 26,25 050040
3-ply panels 3000x1000 10,50kg/m2 31,50 050200
3-ply panels 5000x1000 10,50kg/m2 52,50 050030

3-ply panels 2500x1500 10,50kg/m2 39,38 052590

3-ply panels 5000x2000 10,50kg/m2 105,00 052380

3-Ply Formwork Panels, 21 mm (red / yellow)

Easy to handle formwork panel with red or
yellow melamine resin coating. E-profile steel
edging for front-side protection on request.

3-Ply Formwork Panel 1500x500 10,50kg/m2 7,88 050070

3-Ply Formwork Panel 2000x500 10,50kg/m2 10,50 050080
3-Ply Formwork Panel 2500x500 10,50kg/m2 13,13 050000

Shuttering Plywood

FinNa Plywood, 21 mm
Finnish conifer plywood, high-grade product,
7-veneer construction, Quality G/III,
sanded surface, sealed on one side.

FinNa Plywood 2440x1220 10,90kg/m2 32,45 052827

FinNa Plywood 2500x1250 10,90kg/m2 34,06 052828

Elliottis Pine Plywood, 20mm

Shuttering plywood for standard requirements.
7/9-veneer construction, Quality C+/C, closed
surface on one side.
Sanded surface and uncoated.

Elliottis Pine Plywood

2500x1250 9,95kg/m2 31,10 052800

Plywood Poplar, 20mm

Shuttering plywood for standard requirements.
13/15-veneer construction, Quality C+/C,
closed surface on one side.

Plywood Poplar 2440x1220 10,60kg/m2 31,55 052002

422
 18.10

423
424
19.10 TRIO Service 19.30 DOMINO Service

Page Page

071204 Additional Cleaning Cost 426 071204 Additional Cleaning Cost 429
Corner Protection Profile 426 071200 Cleaning Plywood and Frame DOMINO 429
727112 Drill Bit HSS DIN 338, Ø 5.1 mm 426 727056 EFD Paint red 1l 429
727056 EFD Paint red 1l 426 727057 EFD Paint red 5l 429
727057 EFD Paint red 5l 426 727058 EFD Paint yellow 1l 429
727058 EFD Paint yellow 1l 426 727059 EFD Paint yellow 5l 429
727059 EFD Paint yellow 5l 426 Fin-Ply 15mm 429
Fin-Ply 18mm 427 Fin-Ply Combi 15mm 429
071340 Formwork Repair i.e. Weldings 426 727165 PACTAN Joint Seal, brown 310 ccm 429
727165 PACTAN Joint Seal, brown 310 ccm 426 031001 Plywood Repair Ø 40mm 429
750134 Plastic Sleeve Corner DW 20 426 031000 Plywood Repair Ø 60mm 429
750135 Plastic Sleeve DW 20 426 730050 Rivet DIN 7337 B 5x30, Alu 429
030300 Plug Ø 20/24mm 426 071217 Sealing Hole Ø 40mm 429
030320 Plug Ø 25mm for TRS 426 071216 Sealing Hole Ø 60mm 429
031001 Plywood Repair Ø 40mm 426 066099 Stacking Aid DOMINO DSW 429
031000 Plywood Repair Ø 60mm 426 066093 Transporting Device DOMINO 429
071211 Repair Service RG 270/330x120/90/72 426
071210 Repair Service RG 270x240, 330x240 426
071213 Repair Service RG IE, Panel TRM, TR 426
071212 Repair Service RG Panel h=120/90/60 426 19.90 Technical Planning
071206 Repair Service RK 270/330x120/90/72 426
071205 Repair Service RK 270x240, 330x240 426
071208 Repair Service RK IE, Panel TRM, TR 426 071354 Allowance for Double Sided Application 430
071207 Repair Service RK Panel h=120/90/60 426 071353 Allowance for Single Sided Application 430
730050 Rivet DIN 7337 B 5x30, Alu 426 071271 Assembly on Site - per Hour 430
044890 Rivet Gun BZ 426 071350 Design Work and Technical Support 430
071202 RS Cleaning Service TRIO 426 071362 Design Work incl. Cycle Plans, Parts List 430
071217 Sealing Hole Ø 40mm 426 071358 Shop Drawings for ASG 160, FB 180 430
071216 Sealing Hole Ø 60mm 426 071359 Shop Drawings for KG, CB, SKS 430
750132 Sleeve 18 - DW 20, Base Piece 426 071356 Shop Drawings for MULTIFLEX 430
750133 Sleeve 18 - DW 20, Head Piece 426 071355 Shop Drawings for SKYDECK 430
750040 Spring 4.6x18x1338 mm 426 071357 Shop Drawings for Slab Tables 430
750303 Stacking Aid TRIO DW 20 426 071361 Shop Drawings for Special Forms 430
071351 Shop Drawings for TRIO, DOMINO, HANDSET 430
071352 Shop Drawings for VARIO, RUNDFLEX 430
071290 Static Calculation 430
19.20 SKYDECK Service 071291 Structural Calculation for Approval 430
071364 Supervisor per Day 430

071204 Additional Cleaning Cost 428

727112 Drill Bit HSS DIN 338, Ø 5.1 mm 428
727056 EFD Paint red 1l 428
727057 EFD Paint red 5l 428
727060 EFD Paint white 1l 428
727061 EFD Paint white 5l 428
727058 EFD Paint yellow 1l 428
727059 EFD Paint yellow 5l 428
Fin-Ply 9mm 428
071340 Formwork Repair i.e. Weldings 428
727165 PACTAN Joint Seal, brown 310 ccm 428
031001 Plywood Repair Ø 40mm 428
031000 Plywood Repair Ø 60mm 428
071215 Repair Service RK SKYDECK Filler Panels 428
071214 Repair Service RK SKYDECK Panel 150x75 428
780305 Rivet DIN 7337 B 5x20, GAV 428
044890 Rivet Gun BZ 428
071209 RS Cleaning Service SKYDECK 428
071217 Sealing Hole Ø 40mm 428
071216 Sealing Hole Ø 60mm 428

19.10
-
19.90

425
Cleaning and Repair Service TRIO
Weight kg Item no.

Tools

Rivet Gun BZ 48 2,12 044890

For rivets d = 5mm
Drill Bit HSS ø 5,1mm 0,010 727112
To drill holes for rivets d = 5mm

Accessories general

EFD Varnish Paint yellow RAL 1028 1L 1,20/L 727058

EFD Varnish Paint yellow RAL 1028 5L 1,18/L 727059
EFD Varnish Paint red RAL 2002 1L 1,20/L 727056
EFD Varnish Paint red RAL 2002 5L 1,18/L 727057

Plywood Repair ø 40mm 0,005 031001

Plywood Repair ø 60mm 0,007 031000

Rivet ø 5x30 0,008 730050

PACTAN Joint Seal, 310ccm 0,76 727165

Plug ø 20/24mm 0,003 030300

Plug ø 25mm for TRS 0,004 030320

Stacking Aid TRIO DW20 0,021 750303

Prevents the panels slipping.
Protects formlining against damage.

Sleeve 18 - DW20, Head Piece 0,005 750133

Sleeve 18 - DW20, Base Piece 0,004 750132
For panels 270x240 and 330x240.

Edge Protection Profile f. TAE 90 1,34 700844

Edge Protection Profile f. TE 120 1,80 700845
Edge Protection Profile f. TE 60 0,89 700846
Edge Protection Profile f. TE/TAE 270 4,09 700843

Plastic Sleeve Corner DW20 0,050 750134

Plastic Sleeve DW20 0,042 750135

Plywood Strip 4,6x18x1338mm 0,070 750040

For joint between sheets on large panels.

Repair work TRIO

Sealing Hole ø 40mm in Surface 071217

Sealing Hole ø 60mm in Surface 071216
Formwork Repair i.e. Welding 071340

Cleaning Service "RS"

Cleaning Service RS TRIO 071202

Additional Cleaning Cost 071204
For accessories and heavy dirt.

Repair Service "RK" small

Includes cleaning service RS and
fitting of new plywood sheets.

Repair Service RK 270x240, 330x240 071205

Repair Service RK 270/330x120 – 30 071206
Repair Service RK Panel h = 120/90/60 071207
Repair Service RK IE, Panel TRM, TRS 071208

Repair Service "RG" large

Includes minor repair service "RK"
and refurbishment of frames.

Repair Service RG 270x240, 330x240 071210

Repair Service RG 270/330x120 – 30 071211
Repair Service RG Panel h =120/90/60 071212
Repair Service RG IE, Panel TRM, TRS 071213

426
Spare Plywood for TRIO
Weight kg Item no.

Panels Steel h = 0,60m

Fin-Ply 18mm f. TR 60x90, TRA 90x60 6,40 740284
Fin-Ply 18mm f. TR 60x72 5,10 740285
Fin-Ply 18mm f. TR 60x60 4,20 740286
Fin-Ply 18mm f. TR 60x30 2,00 740287
Fin-Ply 18mm f. TE 60/2 2,00 745321
Panels Steel h = 1,20m
Fin-Ply 18mm f. TR 120x240 35,20 745305
Fin-Ply 18mm f. TR 120x120 17,60 740275
Fin-Ply 18mm f. TR 120x90, TRA 90x120 13,10 740276
Fin-Ply 18mm f. TR 120x72 10,40 740277
Fin-Ply 18mm f. TR 120x60 8,60 740278
Fin-Ply 18mm f. TR 120x30 4,20 740279
Fin-Ply 18mm f. TR 120x24 3,28 740324
Fin-Ply 18mm f. TE 120/2 left 4,00 745322
Fin-Ply 18mm f. TE 120/2 right 4,00 745323
Fin-Ply 18mm f. TM+TRM 120x72/286 2,60 740273
Fin-Ply 18mm f. TRM+TAM120/90x72/740 6,54 740280
Fin-Ply 18mm f. TEI 120/135° left 2,42 103274
Fin-Ply 18mm f. TEI 120/135° right 2,42 103275
Fin-Ply 18mm f. TAE 120/135° left 4,02 103321
Fin-Ply 18mm f. TAE 120/135° right 4,02 103323
Panels Steel h = 2,70m
Fin-Ply 18mm f. TR 270x240 1 Plywood 81,00 745303
Fin-Ply 18mm f. TR 270x240 2 Plywood 81,00 745300
Fin-Ply 18mm f. TR 270x120 40,10 740251
Fin-Ply 18mm f. TR+TRA 270x90 29,90 740252
Fin-Ply 18mm f. TR 270x72 23,80 740256
Fin-Ply 18mm f. TR+TRA 270x60 19,70 740255
Fin-Ply 18mm f. TR+TRA+THP 270x30 9,50 740257
Fin-Ply 18mm f. TR 270x24 7,40 740323
Fin-Ply 18mm f. TE+TAE 270/2 9,12 745324
Fin-Ply 18mm f. TRM+TAM 270x72/1481 13,20 740270
Fin-Ply 18mm f. TRM+TAM 270/330x72/513 3,63 740271
Fin-Ply 18mm f. TEI 270/135° 5,48 103311
Fin-Ply 18mm f. TAE 270/135° 9,12 103333
Panels Steel h = 3,30m (4 tie points)
Fin-Ply 18mm f. TR/4 330x240 2 Plywood 98,99 745340
Fin-Ply 18mm f. TR/4 330x120 49,10 745341
Fin-Ply 18mm f. TR/4 330x90 36,60 745342
Fin-Ply 18mm f. TR/4 330x72 28,73 745343
Fin-Ply 18mm f. TR/4 330x60 24,10 745344
Fin-Ply 18mm f. TR/4 330x30 11,60 745345
Fin-Ply 18mm f. TR/4 330x24 9,08 740322
Fin-Ply 18mm f. TE/4 330 left 11,10 745347
Fin-Ply 18mm f. TE/4 330 right 11,10 745346
Fin-Ply 18mm f. TRM/4 330x72/383 3,50 745348
Fin-Ply 18mm f. TRM+TRM/4+TAM
270/330x72/513 3,63 740271
Fin-Ply 18mm f. TRM/4 330x72/531 4,52 745349
Fin-Ply 18mm f. TRM+TRM/4 330x72/998 8,91 745329
Panels Alu h = 0,90m
Fin-Ply 18mm f. TR 120x90, TRA 90x120 13,10 740276
Fin-Ply 18mm f. TR 60x90, TRA 90x60 6,40 740284
Fin-Ply 18mm f. TRA 90x30 3,04 740770
Fin-Ply 18mm f. TAE 90/2 2,97 745319
Fin-Ply 18mm f. TRM+TAM 120/90x72/740 6,54 740280
Panels Alu h = 2,70m
Fin-Ply 18mm f. TR+TRA 270x90 29,90 740252
Fin-Ply 18mm f. TR+TRA 270x60 19,70 740255 19.10
Fin-Ply 18mm f. TR+TRA 270x30 9,50 740257 -
Fin-Ply 18mm f. TE 270/2 + TAE 270/2 9,12 745324 19.90
Fin-Ply 18mm f. TRM+TAM 270x72/1481 13,20 740270
Fin-Ply 18mm f. TRM+TAM 270/330x72/513 3,63 740271
Column Panels TRS
Fin-Ply 18mm f. TRS 270x90 29,60 740308
Fin-Ply 18mm f. TRS 120x90 12,97 740309
Fin-Ply 18mm f. TRS 60x90 6,33 740310

427
Cleaning and Repair Service SKYDECK
Weight kg Item no.

Tools

Rivet Gun BZ 48 2,12 044890

For rivets d = 5mm
Drill Bit HSS ø 5,1mm 0,010 727112
To drill holes for rivets d = 5mm

Accessories General

EFD Varnish Paint yellow RAL 1028 1L 1,20/L 727058

EFD Varnish Paint yellow RAL 1028 5L 1,18/L 727059
EFD Varnish Paint red RAL 2002 1L 1,20/L 727056
EFD Varnish Paint red RAL 2002 5L 1,18/L 727057
EFD Varnish Paint white RAL 1016 1L 1,20/L 727060
EFD Varnish Paint white RAL 1016 5L 1,18/L 727061

Plywood Repair ø 40mm 0,005 031001

Plywood Repair ø 60mm 0,007 031000

Rivet 5x20, GAV 0,005 780305

PACTAN Joint Seal, 310ccm 0,76 727165

Repair Work SKYDECK

Sealing Hole ø 40mm in Surface 071217

Sealing Hole ø 60mm in Surface 071216
Formwork Repair i.e. Welding 071340

Cleaning Service "RS"

Cleaning Service RS SKYDECK 071209
Additional Cleaning Cost 071204
For accessories and heavy dirt.

Minor Repair Service "RK" small

Includes cleaning service RS and
fitting of new plywood sheets.

Repair Service RK SKYDECK 150x75 071214

Repair Service RK SKYDECK Half Panel 071215

Spare Plywood for SKYDECK

Fin-Ply 9mm for SDP 150x75 7,24 052090

Fin-Ply 9mm for SDP 150x50 4,80 052816
Fin-Ply 9mm for SDP 150x37,5 3,58 052810
Fin-Ply 9mm for SDP 75x75 3,57 052130
Fin-Ply 9mm for SDP 75x50 2,40 052818
Fin-Ply 9mm for SDP 75x37,5 1,74 052815

428
Cleaning and Repair Service DOMINO
Weight kg Item no.

Tools see TRIO

Accessories General

EFD Varnish Paint yellow RAL 1028 1L 1,20/L 727058

EFD Varnish Paint yellow RAL 1028 5L 1,18/L 727059
EFD Varnish Paint red RAL 2002 1L 1,20/L 727056
EFD Varnish Paint red RAL 2002 5L 1,18/L 727057

Plywood Repair ø 40mm 0,005 031001

Plywood Repair ø 60mm 0,007 031000

Rivet ø 5x30 0,004 730050

PACTAN Joint Seal, 310ccm 0,76 727165

Stacking Aid DOMINO DSW 0,030 066099

For stacking of DOMINO panels.
Stacking Sleeve DOMINO DSH 0,020 066093
Prevents the panels slipping.

Repair Work DOMINO

Sealing Hole ø 40mm in Surface 071217

Sealing Hole ø 60mm in Surface 071216
Formwork Repair i.e. Welding 071340

Cleaning Service "RS"

Cleaning Service RS DOMINO 071200

Additional Cleaning Cost 071204
For accessories and heavy dirt.

Spare Plywood for DOMINO

Panels h = 2,50m
Fin-Ply Combi 15mm D 250x100 23,50 740454
Fin-Ply Combi 15mm D 250x75 17,58 740455
Fin-Ply Combi 15mm DM 250x75 17,58 740467
Fin-Ply Combi 15mm D 250x50 11,63 740456

Fin-Ply 15mm D 250x40 10,10 740497

Fin-Ply 15mm D 250x35 8,80 740498
Fin-Ply 15mm D 250x30 7,50 740499
Fin-Ply 15mm D 250x25 6,20 740457
Fin-Ply 15mm D 250x20 4,89 740522

Panels h = 1,25m
Fin-Ply Combi 15mm D 125x100 11,74 740458
Fin-Ply Combi 15mm D 125x75 8,77 740459
Fin-Ply Combi 15mm DM 125x75 8,77 740468
Fin-Ply Combi 15mm D 125x50 5,80 740460

Fin-Ply 15mm D 125x40 5,04 740523

Fin-Ply 15mm D 125x35 4,02 740524
Fin-Ply 15mm D 125x30 3,74 740525
Fin-Ply 15mm D 125x25 3,10 740461
Fin-Ply 15mm D 125x20 2,44 740526

Panels h = 0,75m
Fin-Ply Combi 15mm D 75x100 6,99 740462 19.10
Fin-Ply Combi 15mm D 75x75 5,23 740463 -
Fin-Ply Combi 15mm DM 75x75 5,23 740469 19.90
Fin-Ply Combi 15mm D 75x50 3,40 740464

Fin-Ply 15mm D 75x40 3,00 740527

Fin-Ply 15mm D 75x35 2,61 740528
Fin-Ply 15mm D 75x30 2,23 740529
Fin-Ply 15mm D 75x25 1,83 740465
Fin-Ply 15mm D 75x20 1,45 740531

429
Technical Planning
Weight kg Item no.

Shop Drawings for Wall Formwork

TRIO, DOMINO and HANDSET

Shop drawings 071351
VARIO and RUNDFLEX Shop drawings 071352
Supplement for single sided
applications 071353
Supplement for double sided
applications 071354

Shop Drawings for Slab Formwork

SKYDECK Shop drawings 071355

MULTIFLEX Shop drawings 071356
Shop drawings for Slab Tables 071357

Shop Drawings for Climbing

Formwork and Platform Systems

ASG 160 and FB 180 Shop drawings 071358

KG, CB and SKS Shop drawings 071359

Shop Drawings for Special Forms

Shop Drawings for Special Forms 071361

Design Work incl. Cycle Plans 071362

Design Calculations, Technical

Planning and Site Instruction

Structural Design 071290

Structural Calculations suitable for
obtaining building regulations approval 071291
Design Work and Technical Advice 071350
Assembly on Site 071271
(plus travelling, accommodation and
other expenses)

Supervisor 071364
per Day (max. 10h).

430
 19.10
-
19.90

431
432
20.30 Shoring

Page

100411 Adj. Base Plate UJB 38-50/30 434

100242 Adj. Base Plate UJB 38-80/55 434
019790 Adj. Cross Head Spindle TR 38 -70/50, galv. 435
019780 Base Spindle TR38-70/50, galv. 434
100014 Base Standard UVB 24 436
019950 Cross Head Spindle TR 38-70/50, galv. 435
100863 Handle Lock UJS 435
109563 Head Spindle Locking Device UJH 435
100042 Horizontal Brace UBH 150/150 438
100047 Horizontal Brace UBH 200/200 438
106931 Horizontal Brace UBH 250/150 438
104356 Horizontal Brace UBH 250/200 438
100049 Horizontal Brace UBH 250/250 438
100051 Horizontal Brace UBH 300/150 438
100053 Horizontal Brace UBH 300/300 438
104029 Industrial Deck UDI 25x 50 438
105925 Industrial Deck UDI 25x 75 438
106092 Industrial Deck UDI 25x100 438
106880 Industrial Deck UDI 25x125 438
107002 Industrial Deck UDI 25x150 438
108380 Industrial Deck UDI 25x200 438
108540 Industrial Deck UDI 25x250 438
108689 Industrial Deck UDI 25x300 438
100055 Ledger Brace UBL 150/100 437
102846 Ledger Brace UBL 150/150 437
100059 Ledger Brace UBL 200/100 437
102862 Ledger Brace UBL 200/150 437
100063 Ledger Brace UBL 250/100 437
102861 Ledger Brace UBL 250/150 437
100067 Ledger Brace UBL 300/100 437
104766 Ledger Brace UBL 300/150 437
104780 Ledger UH 25 437
100017 Ledger UH 75 437
101159 Ledger UH 100 437
100021 Ledger UH 150 437
100023 Ledger UH 200 437
100025 Ledger UH 250 437
100027 Ledger UH 300 437
100029 Ledger UH 400 437
107801 Shoring Brace UBS 150/100 437
107810 Shoring Brace UBS 150/150 437
102859 Standard UVR 50 436
101306 Standard UVR 100 436
102860 Standard UVR 150 436
100009 Standard UVR 200 436
100012 Standard UVR 300 436
100013 Standard UVR 400 436
101309 Top Standard UVH 50 436
100000 Top Standard UVH 100 436
100003 Top Standard UVH 150 436
100005 Top Standard UVH 200 436
100007 Top Standard UVH 250 436

20.30

German Approval Certificate No.: Z-8.22-863

D for PERI UP Rosett Scaffolding Node

Type Test No.: S/N 030340

for PERI UP Rosett Shoring Tower

433
 Weight kg Item no.

Adj. Base Plate UJB 38-50/30 3,21 100411

Complete with:
Captive swivel nut, red

For facade scaffolding and shoring.

ø 38

Adjustment min. 45
150

500
150

max. 355
100
ø 10

30
ø 17
Accessories: swivel nut, red
Handle Lock UJS 1,03 100863

5
Adj. Base Plate UJB 38-80/55 4,40 100242
Complete with:
Captive swivel nut, yellow

For facade scaffolding and shoring. ø 38

800
Adjustment min. 45
max. 595

150
150
100
ø 10
30

ø 17
Accessories: swivel nut, yellow

Handle Lock UJS 1,03 100863

5

Heavy Duty Adj. Base Plate TR 38-70/50 5,17 019780

Complete with:
Captive swivel nut, galv.

For more heavily loaded shoring.

ø 38
Adjustment min. 47
700

max. 535
30

140
80
150
ø 21
ø 19
100

Accessories: ø 14
Handle Lock UJS 1,03 100863
10

ø 10

434
 Weight kg Item no.

Adjustable Crosshead Spindle TR 38-70/50, galv. 6,75 019790

Complete with:
37,5 85 37,5
Captive swivel nut, galv. 170
ø 13

11 60

Adjustment min. 51
max. 535
30
700
150
190

10 ø 19
ø 14
ø 10

80
160
ø 21

ø 38 110

Maximum forkhead tilt

= 4,4% in any direction.

Crosshead Spindle TR 38-70/50 7,74 019950

Complete with:
Captive swivel nut, galv. ø 6,5
Holds one or two GT 24
or VT 20Ks stable.

168
195

20
12

Adjustment min. 47
max. 535
30
700

150 240

170
155
85

ø 38

Handle Lock UJS 1,03 100863

For scaffolds for shifting with the crane.
SW 19 138
67

70

Requires 19mm spanner

Head Spindle Locking Device UJH 1,30 109563 145 111

Ledger locking device when using
a lifting fork.
20.30
200

88

435
 Weight kg Item no.

Base Standard UVB 24 2,50 100014

For mounting directly on the base spindle. ø 57
Allows higher loads and erection by one person. ø 13

470
160
ø 11

240
120
ø 48,3

Standard UVR UVR 50 3,13 102859

UVR 100 5,47 101306
UVR 150 7,80 102860 ø 13
UVR 200 10,10 100009

160
UVR 300 14,80 100012

120
UVR 400 19,40 100013

500
ø 13

500

160
120
500

500
80 80

ø 13
500

500

160
4000

120
80 80

ø 13
500

500

500

160
3000

120
ø 13
500

500

500

500
80 80

160
160

2000

1500

120
ø 13
500

500

500

500

500

160
1000

120
500
380

380

380

380

380

380
ø 11 ø 11 ø 11 ø 11 ø 11 ø 11

ø 48,3 ø 48,3 ø 48,3 ø 48,3 ø 48,3 ø 48,3

Top Standard UVH ø 11

Standards without spigot. UVH 50 2,34 101309
120

UVH 100 4,67 100000

UVH 150 7,00 100003
500

UVH 200 9,33 100005 ø 11

UVH 250 11,70 100007
120
500

500

ø 11
120
2500

500

500

500

ø 11
2000

120
1500
500

500

500

500

ø 11
1000

120
160

500
380

380

380
380

380

ø 11 ø 11 ø 11 ø 11 ø 11

ø 48,3 ø 48,3 ø 48,3 ø 48,3 ø 48,3

436
 Weight kg Item no.

Ledger UH
Stamped with length and indication L
25
of length with coloured sticker. 25

60
ø 22

30
L Sticker
UH 25 1,41 104780 250 –
UH 75 2,59 100017 750 white
UH 100 3,35 101159 1000 white
UH 150 4,79 100021 1500 –
UH 200 6,12 100023 2000 white
UH 250 7,46 100025 2500 red
UH 300 8,80 100027 3000 black
UH 400 11,50 100029 4000 –

Ledger Brace UBL

Standard diagonal bracing
for shoring and towers.
Stamped with length.

H
ø 42,4

L X H
UBL 150/100 4,46 100055 1601 1500 1000
UBL 150/150 5,36 102846 1952 1500 1500
UBL 200/100 5,50 100059 2016 2000 1000
UBL 200/150 6,26 102862 2305 2000 1500
UBL 250/100 6,66 100063 2462 2500 1000
UBL 250/150 7,28 102861 2704 2500 1500
UBL 300/100 7,85 100067 2926 3000 1000
UBL 300/150 8,37 104766 3132 3000 1500

Shoring Brace UBS

Standard diagonal bracing for column
framework units.

1
12
3 /2
1000 / 1500

180

20.30
1500

UBS 150/100 5,26 107801

UBS 150/150 6,06 107810

437
 Weight kg Item no.

Horizontal Braces UBH

For horizontal bracing of towers
as required by structural design.

Y
ø 48,3

L X H
UBH 150/150 7,35 100042 2042 1500 1500
UBH 200/200 9,86 100047 2749 2000 2000
UBH 250/150 10,30 106931 2839 2500 1500
UBH 250/200 11,30 104356 3123 2500 2000
UBH 250/250 12,40 100049 3456 2500 2500
UBH 300/150 11,80 100051 3279 3000 1500
UBH 300/300 15,00 100053 4163 3000 3000

Industrial Deck UDI

L

95
245
L
UDI 25x 50 3,97 104029 500
UDI 25x 75 5,35 105925 750
UDI 25x100 6,73 106092 1000
UDI 25x125 8,10 106880 1250
UDI 25x150 9,47 107002 1500
UDI 25x200 12,30 108380 2000
UDI 25x250 15,00 108540 2500
UDI 25x300 17,80 108689 3000

438
 20.30

439
440
20.40 Scaffold Units

Page

001002 Reinforcement Scaffold Addition 200x150/72 442

001006 Reinforcement Scaffold Addition 250x150/72 442
001010 Reinforcement Scaffold Addition 300x150/72 442
001003 Reinforcement Scaffold Addition Plus 200x72 442
001007 Reinforcement Scaffold Addition Plus 250x72 442
001011 Reinforcement Scaffold Addition Plus 300x72 442
001000 Reinforcement Scaffold Basic 200x150/72 442
001004 Reinforcement Scaffold Basic 250x150/72 442
001008 Reinforcement Scaffold Basic 300x150/72 442
001001 Reinforcement Scaffold Basic Plus 200x72 442
001005 Reinforcement Scaffold Basic Plus 250x72 442
001009 Reinforcement Scaffold Basic Plus 300x72 442
001044 Stair Tower Anchoring 443
001037 Stair Tower Basic-P 250x150 443
001041 Stair Tower Basic-P 300x150 443
001036 Stair Tower Basic-T 250x150 443
001040 Stair Tower Basic-T 300x150 443
001038 Stair Tower Plus 250x150 443
001042 Stair Tower Plus 300x150 443
001039 Stair Tower Top 250x150 443
001043 Stair Tower Top 300x150 443
001013 Work Platform Basic-P 250x150 444
001017 Work Platform Basic-P 250x200 444
001021 Work Platform Basic-P 250x250 444
001025 Work Platform Basic-P 300x200 444
001029 Work Platform Basic-P 300x250 444
001033 Work Platform Basic-P 300x300 444
001012 Work Platform Basic-T 250x150 444
001016 Work Platform Basic-T 250x200 444
001020 Work Platform Basic-T 250x250 444
001024 Work Platform Basic-T 300x200 444
001028 Work Platform Basic-T 300x250 444
001032 Work Platform Basic-T 300x300 444
001014 Work Platform Plus 250x150 444
001018 Work Platform Plus 250x200 444
001022 Work Platform Plus 250x250 444
001026 Work Platform Plus 300x200 444
001030 Work Platform Plus 300x250 444
001034 Work Platform Plus 300x300 444
001015 Work Platform Top 250x150 444
001019 Work Platform Top 250x200 444
001023 Work Platform Top 250x250 444
001027 Work Platform Top 300x200 444
001031 Work Platform Top 300x250 444
001035 Work Platform Top 300x300 444

20.40

441
 Weight kg Item no.

Reinforcement Scaffold Basic Plus

L x B
72 200 x 72 118,58 001001
L
250 x 72 129,24 001005
300 x 72 140,50 001009

Reinforcement Scaffold Basic

L x B
72 200 x 150/72 269,40 001000
L
250 x 150/72 289,88 001004
300 x 150/72 310,96 001008

Basic Plus Addition Plus

150

Reinforcement Scaffold Addition Plus Basic Addition

72
L
L x B
200 x 72 82,84 001003
250 x 72 95,00 001007
300 x 72 107,16 001011

Reinforcement Scaffold Addition

L x B
72
L 200 150/72 160,49 001002
250 150/72 177,57 001006
300 150/72 194,75 001010

150

442
 Weight kg Item no.

Stair Tower Top

Top of an alternating or same L x B
direction staircase unit. Also 250 x 150 194,03 001039
used for extending staircase 300 x 150 213,61 001043
unit with stairs in same direction.

Alternating Staircase units

staircase units in same direction
150

Top Top

Stair Tower Plus L x B

For extending an alternating 250 x 150 140,73 001038
staircase unit. 300 x 150 152,45 001042

Plus Top
150

Stair Tower Basic-P L x B

Base of an alternating 250 x 150 235,30 001037
staircase unit. 300 x 150 250,32 001041

Basic-P Basic-T
150

Stair Tower Basic-T L x B

Base for a staircase unit with 250 x 150 279,48 001036
stairs in the same direction. 300 x 150 294,24 001040

Number of ties needed

150

Height Number Tie height [m]

L [m] of ties
8-14 2 4,0 - 12,0

Stair Tower Anchoring 24,89 001044 16-22 3 4,0 - 12,0 20,0

24-30 5 4,0 8,0 12,0 20,0 28,0
32-36 6 4,0 8,0 12,0 20,0 28,0 36,0

20.40

443
 Weight kg Item no.

Work Platform Top

L x B
B 250 x 150 231,58 001015
L
250 x 200 275,68 001019
250 x 250 314,64 001023
300 x 200 301,23 001027 Working platforms Working platforms
300 x 250 344,76 001031 completely covered on completely covered on
300 x 300 390,22 001035 uppermost level only. all levels.

Top Top

Work Platform Plus

L x B
L
B 250 x 150 180,40 001014
250 x 200 189,04 001018
250 x 250 195,40 001022
300 x 200 201,68 001026
300 x 250 208,04 001030
300 x 300 214,88 001034 Plus Top

Work Platform Basic-P

L x B
250 x 150 304,36 001013
250 x 200 319,96 001017
250 x 250 330,92 001021 Basic-P Basic-T
300 x 200 341,08 001025
300 x 250 352,04 001029
300 x 300 363,68 001033

L
B

Work Platform Basic-T

L x B
250 x 150 355,54 001012
250 x 200 406,60 001016
250 x 250 450,28 001020 The minimum width B of the work platform tower
300 x 200 440,63 001024 Maximum height
300 x 250 488,76 001028 Work platform [cm] to topmost level [m]
300 x 300 539,02 001032
L B External Internal
250 150 4,30 6,30
250 200 6,30 8,30
250 250 6,30 10,30
300 200 6,30 8,30
300 250 6,30 10,30
300 300 8,30 10,30
L
B

444
 20.40

445
446
23.10 Stairs PERI UP, PERI Public

Page

108536 End Guardrail Post UZE 150 451

107178 End Guardrail Post UZE 200 451
108544 End Guardrail Post UZE 250 451
107981 Gap Filler UZD 150x16 452
107986 Gap Filler UZD 150x31 452
107977 Gap Filler UZD 150x37 452
108010 Gap Filler UZD 200x16 452
108011 Gap Filler UZD 250x16 452
108387 Guardrail Connector, Corner 454
108218 Guardrail Connector, Straight 454
108214 Guardrail Filler 454
108545 Guardrail Frame UZG 25 454
720610 Hex Bolt ISO 4014 M12x70-8.8, galv. 451
710381 Hex Nut ISO 7042 M12-8, galv. 451
108000 Landing Brace UZB 150 452
108172 Landing Brace UZB 200 452
108179 Landing Brace UZB 250 452
108034 Landing Brace UZB 90° 452
108412 Landing Cover Plate UZD 150/25 453
108190 Landing Guardrail UZG 150 453
101671 Landing Link Panel UAB 30 448
108191 Landing Transom UZL 150 452
104780 Ledger UH 25 453
106626 Ledger with Lap UHP 200 454
100742 Stair Guardrail UAG 449
100830 Stair Guardrail UAH Inside 449
108189 Stair Guardrail UZG 250/150 451
107448 Stair Stringer UZS 250/150 450
100737 Staircase UAS 250/200 448
100738 Staircase UAS 300/200 448
107930 Standard UVR 300 Public 453
100355 Steel Deck UDS 32x150 450
106585 Steel Deck UDS 32x150 Public 450
100373 Steel Deck UDS 32x200 450
106586 Steel Deck UDS 32x200 Public 450
100375 Steel Deck UDS 32x250 450
106587 Steel Deck UDS 32x250 Public 450
107162 Stringer Frame UZF 150 451
106582 Stringer Frame UZF 200 451
106583 Stringer Frame UZF 250 451
104278 Zyl Bolt ISO 4762 M12x60-8.8, galv. 453
104528 Zyl Bolt ISO 4762 M12x60-8.8, galv. 451

Stairs PERI UP
D Used as access stairs for working scaffolds and sites.
Allowable load: 2.0 kN/m2
Loaded run of staircase: 20.0 m

PERI Public
Used as access stairs for public areas.
Allowable load: Width 1.5 m: 7.5 kN/m2
Width 2.5 m: 5.0 kN/m2
(with steps left and right of the Stair Stringers)

Loaded run of staircase:

Load must be considered for all steps and landings.

23.10
447
 Weight kg Item no.

2500
Staircase UAS 250/200 25,30 100737
Staircase UAS 300/200 29,60 100738 350

Permiss. load
2 kN/m2

2000
350

620
3000
600

2000
600

620
400 290
Landing Link Panel UAB 30 2,06 101671
45

1. Configuration for flights UAS 300/200 2. Configuration for flights UAS 250/200

448
 Weight kg Item no.

Stair Guardrail UAG 10,10 100742 1294

Used as inside and outside
guadrail for staicases UAS 250/300
and UAS 300/200.

8
28

2390
76
968
Stair Guardrail UAH Inside 4,33 100830

519
82

Guardrails UAG and UAH shown fitted.

23.10
449
 Weight kg Item no.

Stair Stringer UZS 250/150 42,70 107448

UDS steel decks are used for the steps.
2500 80

167

500
167
167

167

1485
167

1000
167
167

167
Steel Deck UDS
320

L
70

70
68
68
68

L
UDS 32x150 11,20 100355 1500
68

UDS 32x200 14,10 100373 2000

UDS 32x250 17,00 100375 2500

Steel Deck UDS Public

Required as uppermost decking
on the stringer UZS.
1500 / 2000 / 2500
Provides a closed set of stairs
if used on all steps.
100 64
320

L
UDS 32x150 Public 15,8 106585 1500
UDS 32x200 Public 20,6 106586 2000
UDS 32x250 Public 25,2 106587 2500

450
 Weight kg Item no.

Stringer Frame UZF

Fitted to stringer UZS for mounting
of guardrail frame UZG.
UZF 150 20,30 107162
UZF 200 24,30 106582
UZF 250 28,30 106583

1500 /2000 / 2500 234

348
1570 / 2070 / 2570

1458 / 1958 / 2458

Accessories:
Hex Bolt ISO 4014 M12x70-8.8, galv. (2x) 0,08 720610
Hex Nut ISO 7042 M12-8, galv. (2x) 0,02 710381

End Guardrail Post UZE

Necessary for 2-, 4- and 6-bay flights
of stairs in connection with
stringer frame UZF.

UZE 150 16,30 108536 1535 / 2035 / 2535 234

UZE 200 20,30 107178

348
UZE 250 24,30 108544
1508 / 2008 / 2508
130

1500 / 2000 / 2500

Accessories:
Hex Bolt ISO 4014 M12x70-8.8, galv. (1x) 0,08 720610
Hex Nut ISO 7042 M12-8, galv. (1x) 0,02 710381

Stair Gardrail UZG 250/150 49,00 108189

2500 60

100 inner
width
2598
1500

552 1389 489 70

Accessories:
Zyl Bolt ISO 4762 M12x90-8.8, galv. (2x) 0,09 104528
Hex Nut ISO 7042 M12-8, galv. (2x) 0,02 710381

23.10
451
 Weight kg Item no.

Landing Transom UZL 150 16,40 108191

Allows the installation of 1500 80
landing guardrails and decking.

240
332 836 332 103

Landing Brace UZB

Required for installation of landing
30
guardrails on landing transoms. 1447

UZB 150 13,70 108000

UZB 200 18,20 108172

241
UZB 250 22,70 108179

1947 30

241
2447 30

241
Landing Brace UZB 90° 3,00 108034 315
Required for installation of landing
transoms over corners.
263
30

Gap Filler UZD

For use with all landings. 1500 / 2000 / 2500

UZD 150x16 11,20 107981

50

UZD 200x16 15,00 108010

UZD 250x16 18,20 108011
165

Gap Filler UZD UZD 150x31 13,40 107986 1472

UZD 150x37 14,80 107977 835 18
310

Only for corner landings.

50

1471
835
Only with flights of 38
186
stairs which are directly
attached to a corner
368

landing.
50

452
 Weight kg Item no.

Landing Cover Plate UZD 150/25 9,77 108412

1500

350
28

Landing Guardrail UZG 150 34,60 108190

1500 60

1099

1279
180
302,5 835,0 302,5
1440

Accessories::
Zyl Bolt ISO 4762 M12x60-8.8, galv. (2x) 0,07 104278

Standard UVR 300 Public 13,60 107930

160

Used for scaffold extensions ø 13

120

between guardrails.
500
500

160
500
3000

1380

ø 11
48,3

Ledger UH 25 1,41 104780

250

25 25
60
30

23.10
453
 Weight kg Item no.

Ledger with Lap UHP 200 6,55 106626

Mounted on stair stringer UZS.

1950

1750 24,3

60
30
42
M20x80

Guardrail Connector, Straight 1,33 108218

Connects guardrails and allows 224
mounting of guardrail filler.

74
ø 53

20
Accessories:
Guardrail Filler 0,13 108214

Guardrail Filler 0,13 108214

Closed gap between guardrails.
Mounted with guardrail connector straight. 55

ø 44
134,5

ø 50
126

ø 53
ø 58
Accessories:
Guardrail Connector, Straight 1,33 108218

Guardrail Connector, Corner 0,70 108387 145

Connects landing guardrails across corners.
52
20

Guardrail Frame UZG 25 5,97 108545

Installed with guardrail connector straight
190 60
or guardrail connector corner between
available guardrails.
1154

454
 23.10
455
Alphabetical index
Item no. Specification Page Item no. Specification Page

050070 3-S Plywood 21mm 1500x 500mm 422 107601 Angle TRH 270x 6 96
050080 3-S Plywood 21mm 2000x 500mm 422 107608 Angle TRH 270x15 96
050000 3-S Plywood 21mm 2000x 500mm 422 018090 Angle with Nut, galv. 325
050190 3-S Plywood 21mm 2000x1000mm 422 066067 Articulated Corner DGE 75 108
050040 3-S Plywood 21mm 2500x1000mm 422 066047 Articulated Corner DGE 125 107
052590 3-S Plywood 21mm 2500x1500mm 422 066029 Articulated Corner DGE 250 105
050200 3-S Plywood 21mm 3000x1000mm 422 034210 Articulated Corner HSG 90 120
050030 3-S Plywood 21mm 5000x1000mm 422 034230 Articulated Corner HSG 120 120
052380 3-S Plywood 21mm 5000x2000mm 422 034200 Articulated Corner HSG 150 120
102786 Adapter 1/2" - 3/4" 277 023300 Articulated Corner TGE 120 59
030663 Adapter I for Pretension Jack 378 023200 Articulated Corner TGE 270 59
030664 Adapter III for Pretension Jack 378 054414 Articulated Corner TGE 330 80
027680 Adapter SB-1,2 - TRIO/DOMINO 69 023301 Articulated Corner TSGE 120 82
045200 Adapter Strip SRS-TRIO l=3.00m 236 023201 Articulated Corner TSGE 270 82
071204 Additional Cleaning Cost 426 103054 Articulated Coupling GKS 60/60 14
010350 Additional Row of SRZ Slots 11 013220 Articulated Coupling GKZ 60/60 13
100411 Adj. Base Plate UJB 38-50/30 434 013210 Articulated Coupling GKZ 76/76 13
100242 Adj. Base Plate UJB 38-80/55 434 013230 Articulated Coupling GKZ Spec. Length 13
021240 Adjustable Bolt STS 260, galv. 41 027030 Articulated Joint GT 24 134
021250 Adjustable Bolt STS 360, galv. 41 027040 Articulated Joint TRIO 134
051110 Adjustable Brace CB 164-224 148 021150 Articulated Spindle Waler GSRV 65-90 40
019790 Adj. Cross Head Spindle TR 38 -70/50, galv. 333 021140 Articulated Waler GRV 30 40
029240 Adjustable Joint SKS 167 021130 Articulated Waler GRV 60 40
021610 Adjustable Spindle 210, galv. 47 021120 Articulated Waler GRV 75 40
021620 Adjustable Spindle 500, galv. 47 021110 Articulated Waler GRV 90 40
022400 Adjustable Spindle RKR 28 065026 Ashwood Handle L=1180 mm 409
051130 Adjusting Unit CB 160 147 052620 As-Ply 21mm 2500x1250mm 421
029270 Advancing Screw M 24, galv. 142 027930 Assembly Bar 24, galv. 296
029450 Advancing Screw M 30, galv. 170 108286 Assembly Bolt MPB 24 with Nut 342
029460 Advancing Screw M 36, galv. 170 071271 Assembly on Site - per Hour 430
102945 Alignment Clamp VRS Architect. Concrete 14 107820 Assembly Plate MPB 24 342
023940 Alignment Coupler 38, galv. 48 028720 Attachment 100 for Striking Trolley 305
023500 Alignment Coupler BFD, galv. 48 104027 Attachment VARIO 24 U120 12
066080 Alignment Coupler DRS 110 065075 AW Bracket 314
027212 Allan Key SW 14, long 157 065072 AW Clamp 8-10 314
071354 Allowance for Double Sided Application 430 065071 AW Handrail Post 314
071353 Allowance for Single Sided Application 430 065070 AW Slab Stopend Angle 314
079300 Alu Beam MPB 24 l=3.00m 342
079360 Alu Beam MPB 24 l=3.60m 342 102210 Back Stop Lifting Fork 1t / 5.0m 308
079420 Alu Beam MPB 24 l=4.20m 342 102807 Ballast 10 kg ASW 397
079480 Alu Beam MPB 24 l=4.80m 342 022019 Base Adapter HD 253
079540 Alu Beam MPB 24 l=5.40m 342 027310 Base MP 50 338
079600 Alu Beam MPB 24 l=6.00m 342 028100 Base Plate for RS 286
103606 Anchor Bolt PERI MMS 20x130 100 028900 Base Plate for RS 1000/1400, galv. 350
065073 Anchor Chain 3.0kN l=2.5m 286 022024 Base Plate HD 255
026100 Anchor Chain ZAH 137 102018 Base Plate-2 for RS 1000/1400, galv. 350
030930 Anchor Cone 2 DW 20/DW 20, galv. 375 106000 Base Plate-2 for RSS 35
030950 Anchor Cone 2 DW 26/DW 26, galv. 377 019780 Base Spindle TR 38-70/50, galv 333
026636 Anchor Loop 189 106126 Base Spindle TRH 75
027480 Anchor Plate SB-DW 26 363 100014 Base Standard UVB 24 436
029280 Anchor Positioning Plate 15, galv. 142 019900 Base-Head Frame ST 100, galv. 332
029380 Anchor Positioning Plate 20, galv. 170 018070 Baseplate PD 8 319
029390 Anchor Positioning Plate 26, galv. 170 018310 Beam Connector, galv. 323
026440 Anchor Positioning Stud AH-DW 15, 373 021270 Bearing Block GRV, left 41
026420 Anchor Positioning Stud M 24, galv. 142 021280 Bearing Block GRV, right 41
026450 Anchor Positioning Stud M 30, galv. 170 108162 Bearing Box BR 175
026460 Anchor Positioning Stud M 36, galv. 170 051260 Belt Connector CB 150
026280 Anchor Sleeve DW 15 373 051270 Belt Connector Wall 150
026230 Anchor Sleeve M24 141 726055 Betoplan Strip 4x20x2500mm 49
102111 Anchor Sleeve M24, galv. 277 700485 Betoplan Strip 8x20x2500mm 49
026400 Anchor Sleeve M24, Stainless Steel 277 072140 Bit Point TX 30 388
108360 Anchor Sleeve M24, Stainless spec. Length 277 072220 Bitholder for SCU 7-9 388
027650 Anchor Waler U140, l=0.55m 363 037550 Bottom Slide Bar QUATTRO QB 227
027530 Anchor Waler U140, l=2.35m 363 108688 BPA Ø 125 Adapter TRIO 246
019460 Angle for Stair Tower PD 8, galv. 328 027790 Brace Clamp HL, galv. 298
107600 Angle TRH 180x 6 96 027940 Brace Clamp, galv. 298
107607 Angle TRH 180x15 96 037190 Brace Connector -3 RAPID, galv. 208

456
Item no. Specification Page Item no. Specification Page

066082 Brace Connector DRA 112 045032 Circular Column Panel Ø 35cm h=2.4m 234
022016 Brace Connector HDR 255 045033 Circular Column Panel Ø 35cm h=3.0m 234
034550 Brace Connector HSRA 125 045040 Circular Column Panel Ø 40cm h=0.3m 234
108213 Brace Connector MPB 24 343 045041 Circular Column Panel Ø 40cm h=1.2m 234
037530 Brace Connector QUATTRO QR 227 045042 Circular Column Panel Ø 40cm h=2.4m 234
023660 Brace Connector TRIO , galv. 67 045043 Circular Column Panel Ø 40cm h=3.0m 234
106662 Brace Frame Adaptor SB A0,A,B 366 045050 Circular Column Panel Ø 45cm h=0.3m 234
030060 Brace Frame Double Anchor DW 15 360 045051 Circular Column Panel Ø 45cm h=1.2m 234
027500 Brace Frame SB 1 357 045052 Circular Column Panel Ø 45cm h=2.4m 234
027510 Brace Frame SB 2 357 045053 Circular Column Panel Ø 45cm h=3.0m 234
106661 Brace Frame SB Mounting Shoe 366 045060 Circular Column Panel Ø 50cm h=0.3m 234
025700 Brace Frame SB-A 355 045061 Circular Column Panel Ø 50cm h=1.2m 234
025690 Brace Frame SB-A0 354 045062 Circular Column Panel Ø 50cm h=2.4m 234
025710 Brace Frame SB-B 355 045063 Circular Column Panel Ø 50cm h=3.0m 234
025720 Brace Frame SB-C 354 045070 Circular Column Panel Ø 55cm h=0.3m 234
054528 Bracing TRP 120 74 045071 Circular Column Panel Ø 55cm h=1.2m 234
054529 Bracing TRP 240 74 045072 Circular Column Panel Ø 55cm h=2.4m 234
026520 Bracket ASG 160 196 045073 Circular Column Panel Ø 55cm h=3.0m 234
105845 Bracket ASG 70-100 203 045080 Circular Column Panel Ø 60cm h=0.3m 234
026526 Bracket Connector ASG 196 045081 Circular Column Panel Ø 60cm h=1.2m 234
034570 Bracket HSK 60 125 045082 Circular Column Panel Ø 60cm h=2.4m 234
026180 Bracket KG 130 136 045083 Circular Column Panel Ø 60cm h=3.0m 234
026030 Bracket KG 180 132 045090 Circular Column Panel Ø 65cm h=0.3m 234
026050 Bracket KG 240 131 045091 Circular Column Panel Ø 65cm h=1.2m 234
026651 Bracket Strut FB 180-3 180 045092 Circular Column Panel Ø 65cm h=2.4m 234
013240 Bulkhead Tie 17 045093 Circular Column Panel Ø 65cm h=3.0m 234
066083 Bulkhead Tie DAS, galv. 112 045100 Circular Column Panel Ø 70cm h=0.3m 234
034540 Bulkhead Tie HST, galv. 123 045101 Circular Column Panel Ø 70cm h=1.2m 234
023640 Bulkhead Tie TS, galv. 65 045102 Circular Column Panel Ø 70cm h=2.4m 234
065022 Butt Strap 54/30 mm 409 045103 Circular Column Panel Ø 70cm h=3.0m 234
065023 Butt Strap 102/30 mm 409 045104 Circular Column Panel Ø 75cm h=0.3m 234
065024 Butt Strap 170/30 mm 409 045105 Circular Column Panel Ø 75cm h=1.2m 234
045106 Circular Column Panel Ø 75cm h=2.4m 234
105905 Cable 2-Strands Ø=10mm, L=4.0m 35 045107 Circular Column Panel Ø 75cm h=3.0m 234
030130 Cam Nut DW 15, galv. 123 045108 Circular Column Panel Ø 80cm h=0.3m 234
026040 Cantilever Beam KG 180 133 045109 Circular Column Panel Ø 80cm h=1.2m 234
026060 Cantilever Beam KG 240 131 045110 Circular Column Panel Ø 80cm h=2.4m 234
019660 Cap Piece, galv. 325 045111 Circular Column Panel Ø 80cm h=3.0m 234
051020 Carriage CB 240 146 045112 Circular Column Panel Ø 85cm h=0.3m 234
027010 Carriage FW 130 045113 Circular Column Panel Ø 85cm h=1.2m 234
018260 Castor PD 8 320 045114 Circular Column Panel Ø 85cm h=2.4m 234
022025 Centering Bar 40x20x400mm 251 045115 Circular Column Panel Ø 85cm h=3.0m 234
022013 Centering Bolt HD M12, galv. 253 045116 Circular Column Panel Ø 90cm h=0.3m 234
101854 Central Cross 170 305 045117 Circular Column Panel Ø 90cm h=1.2m 234
102251 Central Cross 200 305 045118 Circular Column Panel Ø 90cm h=2.4m 234
105328 Centrepivot VHM (Ø 60mm) 391 045119 Circular Column Panel Ø 90cm h=3.0m 234
054240 Chamfer Strip 15/15 l=2.70m 221 045120 Circular Column Panel Ø 95cm h=0.3m 234
066088 Chamfer Strip DSD 250 114 045121 Circular Column Panel Ø 95cm h=1.2m 234
037590 Chamfer Strip QDL 50 227 045122 Circular Column Panel Ø 95cm h=2.4m 234
037600 Chamfer Strip QDL 125 227 045123 Circular Column Panel Ø 95cm h=3.0m 234
037610 Chamfer Strip QDL 275 227 045124 Circular Column Panel Ø 100cm h=0.3m 234
105448 Chamfer Strip QDL 350 227 045125 Circular Column Panel Ø 100cm h=1.2m 234
037210 Chamfer Strip RAPID l=3.0m 208 045126 Circular Column Panel Ø 100cm h=2.4m 234
031200 Chamfer Strip with Flange l=2.50m 20 045127 Circular Column Panel Ø 100cm h=3.0m 234
019130 C-Hook 15kN, galv. 309 045128 Circular Column Panel Ø 105cm h=0.3m 234
045211 Circular Column Landing 25-70 236 045129 Circular Column Panel Ø 105cm h=1.2m 234
102176 Circular Column Landing 75-120 237 045130 Circular Column Panel Ø 105cm h=2.4m 234
045010 Circular Column Panel Ø 25cm h=0.3m 234 045131 Circular Column Panel Ø 105cm h=3.0m 234
045011 Circular Column Panel Ø 25cm h=1.2m 234 045132 Circular Column Panel Ø 110cm h=0.3m 234
045012 Circular Column Panel Ø 25cm h=2.4m 234 045133 Circular Column Panel Ø 110cm h=1.2m 234
045013 Circular Column Panel Ø 25cm h=3.0m 234 045134 Circular Column Panel Ø 110cm h=2.4m 234
045020 Circular Column Panel Ø 30cm h=0.3m 234 045135 Circular Column Panel Ø 110cm h=3.0m 234
045021 Circular Column Panel Ø 30cm h=1.2m 234 045136 Circular Column Panel Ø 115cm h=0.3m 234
045022 Circular Column Panel Ø 30cm h=2.4m 234 045137 Circular Column Panel Ø 115cm h=1.2m 234
045023 Circular Column Panel Ø 30cm h=3.0m 234 045138 Circular Column Panel Ø 115cm h=2.4m 234
045030 Circular Column Panel Ø 35cm h=0.3m 234 045139 Circular Column Panel Ø 115cm h=3.0m 234
045031 Circular Column Panel Ø 35cm h=1.2m 234 045140 Circular Column Panel Ø 120cm h=0.3m 234

457
Item no. Specification Page Item no. Specification Page

045141 Circular Column Panel Ø 120cm h=1.2m 234 101995 Concrete Cone Gauge 384
045142 Circular Column Panel Ø 120cm h=2.4m 234 108493 Concrete Pump Connector BPA Ø 125 246
045143 Circular Column Panel Ø 120cm h=3.0m 234 031260 Concrete Spacer Tube FZR 22 l=0.90m 374
045210 Circular Column Platform 25-70, complete 236 037410 Concreting Landing 211
102177 Circular Column Platform 75-120, complete 237 022950 Concreting Platform TRIO 120x270 70
030790 Clamp Lock 393 037400 Concreting Platform, complete 211
028660 Clawhead 16/20 S, galv. 295 065033 Cone DR 22 374
028670 Clawhead 16/20, galv. 295 026240 Cone for Anchor Sleeve M24 141
028880 Clawhead 24 L, galv. 294 031390 Cone FZR 22 374
028890 Clawhead 24 S, galv. 294 027304 Connection Bolt MP, with Nut 340
071200 Cleaning Plywood and Frame DOMINO 429 019570 Connection for Stair Tower Stabilizer, galv. 327
108504 Clear Slide BPA Ø 125 246 100541 Connector for Platform VARIO 25
051100 Climbing Bracket CB 160 147 028080 Connector Kicker/Push-Pull Prop, galv. 253
051000 Climbing Bracket CB 240 146 107160 Connector MP-SRU 343
026035 Climbing Bracket KG 180 132 027301 Connector MPV-2 340
026055 Climbing Bracket KG 240 130 025740 Connector SB-A,B,C - TRIO/DOMINO 69
031220 Climbing Cone-2 M 24/DW 15, galv. 140 019810 Connector ST 100, galv. 334
030920 Climbing Cone-2 M 30/DW 20, galv. 168 051090 Connector TRIO-CB 149
030940 Climbing Cone-2 M 36/DW 26, galv. 169 026160 Connector ZAH-KG 137
105907 Clip for Bracket 70/100 203 023971 Corner Alu TAE 90 77
034500 Clip HSC, galv. 123 023891 Corner Alu TAE 270 76
029440 Coach Screw DIN 571 6x 20, galv. 142 103938 Corner Coupling EKZ 47/43 36
051640 Coach Screw DIN 571 6x 80, galv. 158 013130 Corner Coupling EKZ 76/76 13
024270 Coach Screw DIN 571 8x 60, galv. 20 013140 Corner Coupling EKZ 95/43 13
024260 Coach Screw DIN 571 8x 80, galv. 20 013180 Corner Coupling EKZ Spec. Length 13
024520 Coach Screw DIN 571 8x160, galv. 158 026626 Corner Frame FBE 183
037270 Column Frame 60, Alu 208 107021 Corner Handrail TRP 73
037260 Column Frame 210, Alu 208 026527 Corner Plate ASG 196
037250 Column Frame 300, Alu 208 026512 Corner Platform ASE 195
012060 Column Main Waler SGRZ 181 214 107009 Corner Platform TRP 73
066073 Column Panel D 75x20 115 700844 Corner Protection Profile TAE 90 426
066072 Column Panel D 75x30 115 700846 Corner Protection Profile TE 60 426
066071 Column Panel D 75x35 115 700845 Corner Protection Profile TE 120 426
066070 Column Panel D 75x40 115 700843 Corner Protection Profile TE/TAE 270 426
066058 Column Panel D 125x20 115 065100 Corner Reveal ASP, WD 20, 42.7 cm 416
066057 Column Panel D 125x30 115 065101 Corner Reveal ASP, WD 20, 49.0 cm 416
066056 Column Panel D 125x35 115 065102 Corner Reveal ASP, WD 20, 70.5 cm 416
066055 Column Panel D 125x40 115 065103 Corner Reveal ASP, WD 20, 193.5 cm 416
066038 Column Panel D 250x20 115 065106 Corner Reveal ASP, WD 24, 42.7 cm 416
066037 Column Panel D 250x30 115 065107 Corner Reveal ASP, WD 24, 49.0 cm 416
066036 Column Panel D 250x35 115 065108 Corner Reveal ASP, WD 24, 70.5 cm 416
066035 Column Panel D 250x40 115 065109 Corner Reveal ASP, WD 24, 193.5 cm 416
054220 Column Panel TRS 60x90 220 065112 Corner Reveal ASP, WD 25, 42.7 cm 416
054210 Column Panel TRS 120x90 220 065113 Corner Reveal ASP, WD 25, 49.0 cm 416
054200 Column Panel TRS 270x90 220 065114 Corner Reveal ASP, WD 25, 70.5 cm 416
054230 Column Tie Bolt TRIO, galv. 220 065115 Corner Reveal ASP, WD 25, 193.5 cm 416
012050 Column Vario Waler SVRZ 120 214 065118 Corner Reveal ASP, WD 30, 42.7 cm 416
012080 Column Waler SSRZ U100 Spec. Length 214 065119 Corner Reveal ASP, WD 30, 49.0 cm 416
012040 Column Waler SSRZ U120 Spec. Length 214 065120 Corner Reveal ASP, WD 30, 70.5 cm 416
012090 Column Waler SSRZ U140 Spec. Length 214 065121 Corner Reveal ASP, WD 30, 193.5 cm 416
012150 Column Waler SSRZ-24 97/ 85 214 027070 Corner Scaffold Bracket EGB 80, left 21
012160 Column Waler SSRZ-24 113/101 214 027060 Corner Scaffold Bracket EGB 80, right 21
061180 Combihead SCK 284 022410 Corner Spindle RKR 28
066084 Compensation Waler DAR 80 110 037540 Corner Tie Unit QUATTRO QA 227
034510 Compensation Waler HSR 59 122 022661 Corner TRIO Structure TSE 120 82
023550 Compensation Waler TAR 85 64 022581 Corner TRIO Structure TSE 270 82
024000 Compensation Washer 16, galv. 243 054375 Corner TRIO Structure TSE 330 82
024180 Compensation Washer 20, galv. 243 018060 Cotter Pin 4/1, galv. 183
029200 Compression Brace 2 SKS, 1.35-1.95m 163 022230 Cotter Pin 5/1, galv. 41
029210 Compression Brace 3 SKS, 1.75-2.35m 163 030140 Counterplate DW 15, 120x120x15 370
029220 Compression Brace 4 SKS, 2.55-3.15m 163 030830 Counterplate DW 20, 120x120x20 361
107161 Compression Brace Head MP/SRU 343 030420 Counterplate DW 26, 120x120x20 377
022022 Compression Prop Head HD 255 027160 Counterplate for Locating Shoe 135
022023 Compression Prop Spindle HD 255 108543 Coupling BPA Ø 125 246
026523 Compression Strut ASE 195 024220 Coupling Compression Plate KDP 17
026522 Compression Strut ASG 199 030400 Coupling Nut M 30/DW 26, galv. 363
026627 Compression Strut FB-2 180 401395 Coupling Offset VVKZ 3/99 13

458
Item no. Specification Page Item no. Specification Page

022020 Coupling Section HD 30 250 019940 Diagonal Strut ST 100, galv. 332
102825 Coupling VKS 99 Architec. Concrete 14 021630 Distribution Waler 47
013010 Coupling VKZ 99 13 031641 DK Concrete Cone Architc. DW 15, 58/52 379
013020 Coupling VKZ 147 13 031642 DK Concrete Cone DW 15 58/30 379
013030 Coupling VKZ 211 13 031643 DK Concrete Cone UNI DW 15 58/52 379
013080 Coupling VKZ Special Length 13 031635 DK Cone DW 15/35 379
061038 Cover Strip SAL 37.5 280 031636 DK Cone DW 15/55 379
061024 Cover Strip SAL 50 280 031637 DK Cone DW 20/55 380
061027 Cover Strip SAL 75 280 031638 DK Cone DW 26/55 380
061026 Cover Strip SAL 150 280 031655 DK Cone Remover UNI 384
021980 Crane Eye 24, left 19 031644 DK Tongs for Concrete Cone 58 384
021990 Crane Eye 24, right 19 027520 Double Anchor Tie Yoke DSW 360
723910 Crane Eye A18 32 024010 Double Girder Strap DTB, galv. 322
020610 Crane Eye BR 0,4t 175 102027 Double Handrail 190 ASW 397
105401 Crane Eye BR 2.5t 175 018280 Double Head Nail l=65mm 20
037440 Crane Hook Concreting Platform 211 024170 Double Hook Strap for GT 24, galv. 15
034520 Crane Hook HSKA 123 022440 Double Spindle RKR 28
037320 Crane Lifting Unit -2 RAPID 209 022380 Double Spindle RKR with Wheel 28
019070 Crane Lifting Unit, Lower Part - PD 8 322 022011 Double Tie Yoke HDD 251
028560 Crane Lifting Unit, Lower Part - UNIPORTAL 307 102390 Drill- and Pretension Device 45° 378
028570 Crane Lifting Unit, Upper Part 307 727112 Drill Bit HSS DIN 338, Ø 5.1 mm 390
070760 Crane Splice GT 24 19 031040 Drill Bit Ø 20mm 390
018630 Cross Head Spindle PD8 20/24, galv. 319 031080 Drill Bit Ø 25mm 390
019950 Cross Head Spindle TR 38-70/50, galv. 333 031030 Drill Bit Ø 35mm 390
018300 Cross Strap, galv. 323 031100 Drill Bit Ø 40mm 390
010180 Cross Waler KRZ U100, Spec. Length 11 031120 Drill Bit Ø 50mm 390
010270 Cross Waler KRZ U120, Spec. Length 11 061210 Drophead SFK 282
010190 Cross Waler KRZ U140, Spec. Length 11 061035 Drophead SFK/27 282
028690 Crosshead 16 S, galv. 295 103513 Drop-in Corner ASU 90° 194
028700 Crosshead 16, galv. 295 065017 Drying Locker Klima TS 2000 409
028680 Crosshead 20/24 S, galv. 294
027890 Crosshead 20/24, galv. 294 061046 Edge Beam SRT-2 75 281
106989 Crosshead PEP 10 / VT 20 296 061045 Edge Beam SRT-2 150 281
022310 Culvert Frame Waler RKR U100 26 021650 Edge Girder Strap, galv. 46
022320 Culvert Frame Waler RKR U120 26 021720 Edge Profile 60, left 45
022330 Culvert Frame Waler RKR U140 26 021710 Edge Profile 60, right 45
022340 Culvert Frame Waler RKR U160 26 021700 Edge Profile 120, left 45
022350 Culvert Frame Waler RKR U180 26 021680 Edge Profile 120, right 45
065130 Cutting Cost ASP 417 021740 Edge Profile 240, left 45
074900 Cutting Cost Girder VT 5 021730 Edge Profile 240, right 45
030050 Cutting Cost Tie Rod DW 15 / B 15 140 021450 Edge Profile 300, left 45
030800 Cutting Cost Tie Rod DW 20 / B 20 168 021440 Edge Profile 300, right 45
030500 Cutting Cost Tie Rod DW 26 169 021760 Edge Profile 360, left 45
031320 Cutting Cost Tube FZR 22 374 021750 Edge Profile 360, right 45
727056 EFD Paint red 1l 426
029130 DAM Scaffold Bracket SKS 180 162 727057 EFD Paint red 5l 426
029140 DAM Scaffold Bracket SKSF 240 162 727060 EFD Paint white 1l 428
072240 Depth Chuck for SCU 7-9 388 727061 EFD Paint white 5l 428
071350 Design Work and Technical Support 430 727058 EFD Paint yellow 1l 426
071362 Design Work incl. Cycle Plans, Parts List 430 727059 EFD Paint yellow 5l 426
102028 Diagonal Brace 210 ASW 397 072150 Electric Power Wrench ASB 636, M 14 388
018150 Diagonal Brace DK 125, galv. 321 107470 Element TRH 264x180 I 86
019150 Diagonal Brace DK 125/110, galv. 321 107474 Element TRH 264x180 O 86
018160 Diagonal Brace DK 150, galv. 321 107480 Element TRH 264x270 I 87
019160 Diagonal Brace DK 150/110, galv. 321 107481 Element TRH 264x270 O 87
019210 Diagonal Brace DK 186, galv. 321 107472 Element TRH 264x360 I 88
018170 Diagonal Brace DK 200, galv. 321 107473 Element TRH 264x360 O 88
019170 Diagonal Brace DK 200/110, galv. 321 107492 Element TRH 264x540 I 89
018180 Diagonal Brace DK 250, galv. 321 107493 Element TRH 264x540 O 89
019180 Diagonal Brace DK 250/110, galv. 321 107497 Element TRH 354x180 I 92
018190 Diagonal Brace DK 300, galv. 321 107498 Element TRH 354x180 O 92
019190 Diagonal Brace DK 300/110, galv. 321 107502 Element TRH 354x270 I 93
018230 Diagonal Brace DK 310, galv. 321 107503 Element TRH 354x270 O 93
019220 Diagonal Brace DK 310/110, galv. 321 101411 Element VARIO S 100x240 8
018200 Diagonal Brace DK 350, galv. 321 101410 Element VARIO S 100x300 8
019280 Diagonal Strut 200, galv. 328 101409 Element VARIO S 100x360 8
019270 Diagonal Strut 310, galv. 328 101408 Element VARIO S 100x420 8

459
Item no. Specification Page Item no. Specification Page

101407 Element VARIO S 100x480 8 034470 Filler Bar HSAS 120x6 121
101406 Element VARIO S 100x540 8 034320 Filler Bar HSAS 150x5 121
101405 Element VARIO S 100x600 8 034480 Filler Bar HSAS 150x6 121
101255 Element VARIO S 125x240 8 034140 Filler Panel HSAP 90x15 121
101256 Element VARIO S 125x300 8 034280 Filler Panel HSAP 120x15 121
101257 Element VARIO S 125x360 8 034130 Filler Panel HSAP 150x15 121
101258 Element VARIO S 125x420 8 104031 Filler Pin Ø 21x120 14
101259 Element VARIO S 125x480 8 034180 Filler Plate HSLA 90 122
101260 Element VARIO S 125x540 8 034290 Filler Plate HSLA 120 122
101261 Element VARIO S 125x600 8 034170 Filler Plate HSLA 150 122
101248 Element VARIO S 187.5x240 8 023270 Filler Plate LA 120x36 62
101249 Element VARIO S 187.5x300 8 023170 Filler Plate LA 270x36 62
101250 Element VARIO S 187.5x360 8 054384 Filler Plate LA 330x36 80
101251 Element VARIO S 187.5x420 8 101823 Filler Profile TPP 120, Alu 63
101252 Element VARIO S 187.5x480 8 101839 Filler Profile TPP 120/27, Alu 63
101253 Element VARIO S 187.5x540 8 101813 Filler Profile TPP 270, Alu 63
101254 Element VARIO S 187.5x600 8 101834 Filler Profile TPP 270/27, Alu 63
101241 Element VARIO S 250x240 8 101829 Filler Profile TPP 330, Alu 81
101242 Element VARIO S 250x300 8 101846 Filler Profile TPP 330/27, Alu 81
101243 Element VARIO S 250x360 8 066053 Filler Support DPA 125 107
101244 Element VARIO S 250x420 8 066054 Filler Support DPA 125/27 107
101245 Element VARIO S 250x480 8 066033 Filler Support DPA 250 105
101246 Element VARIO S 250x540 8 066034 Filler Support DPA 250/27 105
101247 Element VARIO S 250x600 8 034410 Filler Support HSP 90 121
108983 Element with Corner Platform TRH 264x270 I 91 034390 Filler Support HSP 120 121
108984 Element with Corner Platform TRH 354x270 I 95 034400 Filler Support HSP 150 121
019930 End Frame ST 100, galv. 334 023450 Filler Support TPA 120 63
108536 End Guardrail Post UZE 150 451 023460 Filler Support TPA 270 63
107178 End Guardrail Post UZE 200 451 054430 Filler Support TPA 330 81
108544 End Guardrail Post UZE 250 451 061049 Filler Timber SPH 150 281
065066 End Handrail Frame 55 198 061036 Filler Timber SPH 225 281
054519 End Handrail TRP, foldable 72 051230 Finishing Platform Beam CB 152
103724 End Ladder 180/2, galv. 210 026631 Finishing Platform Bracket FBN-2 182
710001 End Plate SRZ 11 026625 Finishing Platform FBN-2/300 179
103932 End Platform VARIO 23 104756 Finishing Platform Post SKS 3 164
070750 End Protection Cap GT 24, galv. 4 104757 Finishing Platform Post SKS 4 164
061023 End Support SSL 283 104754 Finishing Platform Waler SKS 164
019920 End Waler ST 100, galv. 334 052827 FinNa-Ply 21mm 2440x1220mm 422
102026 Entry Platform 190 ASW 397 052828 FinNa-Ply 21mm 2500x1250mm 422
061300 Erection Aid SSH, Alu 285 052095 Fin-Ply 9mm 1500x3000mm 420
070740 Erection Bar GT/VT, galv. 296 052815 Fin-Ply 9mm SDP 75x 37.5 428
054517 Erection Device TRP 200, 10 kN 74 052818 Fin-Ply 9mm SDP 75x 50 428
103417 Exit Handrail Post SRS 134, galv. 239 052130 Fin-Ply 9mm SDP 75x 75 428
019480 Exit Post, galv. 328 052810 Fin-Ply 9mm SDP 150x 37.5 428
072160 Extension 1/2" l=250mm 277 052816 Fin-Ply 9mm SDP 150x 50 428
104050 Extension 60 for Striking Trolley 305 052090 Fin-Ply 9mm SDP 150x 75 428
024480 Extension Splice 24-2 19 052150 Fin-Ply 12mm 1500x3000mm 420
108995 Extension Waler TRH 125 101 052159 Fin-Ply 15mm 1500x3000mm 420
103992 External Corner Platform VARIO 23 740531 Fin-Ply 15mm D 75x20 429
740465 Fin-Ply 15mm D 75x25 429
024280 F.H. Bolt DIN 603 M 6x100 w.N, galv. 158 740529 Fin-Ply 15mm D 75x30 429
051650 F.H. Bolt DIN 603 M 6x180 w.N, galv. 158 740528 Fin-Ply 15mm D 75x35 429
710295 F.H. Bolt DIN 603 M 6x180 w.N, galv. 401 740527 Fin-Ply 15mm D 75x40 429
710709 F.H. Bolt DIN 603 M 8x 65 w.N, galv. 401 740526 Fin-Ply 15mm D 125x20 429
024140 F.H. Bolt DIN 603 M 8x 70 w.N, galv. 15 740525 Fin-Ply 15mm D 125x30 429
723439 F.H. Bolt DIN 603 M 8x 80 w.N, galv. 401 740524 Fin-Ply 15mm D 125x35 429
710240 F.H. Bolt DIN 603 M 8x100 w.N, galv. 15 740523 Fin-Ply 15mm D 125x40 429
024360 F.H. Bolt DIN 603 M 8x125 w.N, galv. 158 740522 Fin-Ply 15mm D 250x20 429
725462 F.H. Bolt DIN 603 M 8x140 w.N, galv. 401 740499 Fin-Ply 15mm D 250x30 429
024380 F.H. Bolt DIN 603 M 8x160 w.N, galv. 401 740498 Fin-Ply 15mm D 250x35 429
024390 F.H. Bolt DIN 603 M 8x200 w.N, galv. 401 740497 Fin-Ply 15mm D 250x40 429
024410 F.H. Bolt DIN 603 M 8x250 w.N, galv. 401 052240 Fin-Ply 18mm 1500x3000mm 420
710326 F.H. Bolt DIN 603 M 8x60 w.N, galv. 182 103321 Fin-Ply 18mm TAE 120/135° left 427
750076 F.H. Bolt DIN 603 M 8x90 w.N, galv. 270 103323 Fin-Ply 18mm TAE 120/135° right 427
034330 Filler Bar HSAS 90x5 121 745319 Fin-Ply 18mm TAE 90/2 427
034460 Filler Bar HSAS 90x6 121 745321 Fin-Ply 18mm TE 60/2 427
034370 Filler Bar HSAS 120x5 121 745322 Fin-Ply 18mm TE 120/2, left 427

460
Item no. Specification Page Item no. Specification Page

745323 Fin-Ply 18mm TE 120/2, right 427 019430 Flight of Stairs PD 8, galv. 329
745347 Fin-Ply 18mm TE/4 330, left 427 102025 Folding Base Unit 160/190 ASW 397
745346 Fin-Ply 18mm TE/4 330, right 427 020330 Folding Bearing Plate 25 175
745324 Fin-Ply 18mm TE270/2+TAE 270/2 427 026652 Folding Bracket FB 180-3 182
103333 Fin-Ply 18mm TEA 270/135° 427 026649 Folding Corner Platform FEB 180-3/300 178
103274 Fin-Ply 18mm TEI 120/135° left 427 026648 Folding Platform FB 180-3/300 178
103275 Fin-Ply 18mm TEI 120/135° right 427 018110 Foot Tube FR 80, galv. 320
103311 Fin-Ply 18mm TEI 270/135° 427 031090 Form Lining Drill Bit Ø20x1000 390
740287 Fin-Ply 18mm TR 60x 30 427 065062 Formwork Bracket-2 406
740285 Fin-Ply 18mm TR 60x 72 427 030260 Formwork Joint SSP l=2.50m 20
740284 Fin-Ply 18mm TR 60x 90, TRA 90x 60 427 071340 Formwork Repair i.e. Weldings 426
740324 Fin-Ply 18mm TR 120x 24 427 023800 Foundation Strap TRIO 68
740279 Fin-Ply 18mm TR 120x 30 427 066090 Foundation Tie Clamp DOMINO DLS 113
740278 Fin-Ply 18mm TR 120x 60 427 034680 Foundation Tie Clamp HANDSET HLS 124
740277 Fin-Ply 18mm TR 120x 72 427 023010 Foundation Tie Clamp TRIO TLS 68
740276 Fin-Ply 18mm TR 120x 90, TRA 90x120 427 018140 Frame Connector with Washer, galv. 318
740275 Fin-Ply 18mm TR 120x120 427 028390 Frame MRK 62.5 339
745305 Fin-Ply 18mm TR 120x240 427 028400 Frame MRK 75 339
740323 Fin-Ply 18mm TR 270x 24 427 028330 Frame MRK 90 339
740256 Fin-Ply 18mm TR 270x 72 427 028340 Frame MRK 120 339
740251 Fin-Ply 18mm TR 270x120 427 028380 Frame MRK 137.5 339
745303 Fin-Ply 18mm TR 270x240 1 Plate 427 028350 Frame MRK 150 339
745300 Fin-Ply 18mm TR 270x240 2 Plates 427 028460 Frame MRK 201.5 339
740257 Fin-Ply 18mm TR, TRA 270x 30 427 028360 Frame MRK 225 339
740252 Fin-Ply 18mm TR, TRA 270x 90 427 028470 Frame MRK 230 339
740255 Fin-Ply 18mm TR, TRA, THP 270x 60 427 028480 Frame MRK 237 339
740322 Fin-Ply 18mm TR/4 330x 24 427 028490 Frame MRK 266 339
745345 Fin-Ply 18mm TR/4 330x 30 427 028370 Frame MRK 296 339
745344 Fin-Ply 18mm TR/4 330x 60 427 100660 Frame Pallet USP 72 414
745343 Fin-Ply 18mm TR/4 330x 72 427 100678 Frame Pallet USP 104 397
745342 Fin-Ply 18mm TR/4 330x 90 427 018520 Frame R 110, galv. 318
745341 Fin-Ply 18mm TR/4 330x120 427 018020 Frame R 110, painted 318
745340 Fin-Ply 18mm TR/4 330x240 427 018510 Frame R 150, galv. 318
740286 Fin-Ply 18mm TR/THP 60x60 427 018010 Frame R 150, painted 318
740770 Fin-Ply 18mm TRA 90x 30 427 018290 Framing Clip, galv. 323
740280 Fin-Ply 18mm TRM 120+TAM 90xx72 l=740mm 427 065124 Framing Member ASP, l=2.50m 417
740273 Fin-Ply 18mm TRM 120x72 l=286mm 427 065125 Framing Member ASP, l=3.00m 417
745348 Fin-Ply 18mm TRM/4 330x72 l=383mm 427 065126 Framing Member ASP, l=3.50m 417
745349 Fin-Ply 18mm TRM/4 330x72 l=531mm 427 103981 FTF 500 Bracket 32
740271 Fin-Ply 18mm TRM+TAM 270/330x72 l=513mm 427 104195 FTF Assembly foot 34
740270 Fin-Ply 18mm TRM+TAM 270x 72 l=1481mm 427 103949 FTF Bracket with spindle 33
745329 Fin-Ply 18mm TRM+TRM/4 330x72 l=998mm 427 104744 FTF Clamp 33
740310 Fin-Ply 18mm TRS 60x 90 427 104018 FTF End Guardrail, complete 37
740309 Fin-Ply 18mm TRS 120x 90 427 103946 FTF Platform 36
740308 Fin-Ply 18mm TRS 270x 90 427 103945 FTF Spindle Guide 33
052260 Fin-Ply 21mm 1250x2500mm 420 104070 FTF Spindle Guide with Spindle 33
052060 Fin-Ply 21mm 1500x2500mm 420 103942 FTF Tie Plate DW 15, complete 36
052270 Fin-Ply 21mm 1500x3000mm 420 104017 FTF Tie Unit 65, complete 36
052070 Fin-Ply 21mm 1500x4000mm 420 104083 FTF Waler Coupler 33
740464 Fin-Ply Combi 15mm D 75x 50 429 103944 FTF Waler Coupler w. Brace Connector 33
740463 Fin-Ply Combi 15mm D 75x 75 429 104803 FTF Wrench SW 38/1500 34
740462 Fin-Ply Combi 15mm D 75x100 429
740461 Fin-Ply Combi 15mm D 125x 25 429 107981 Gap Filler UZD 150x16 452
740460 Fin-Ply Combi 15mm D 125x 50 429 107986 Gap Filler UZD 150x31 452
740459 Fin-Ply Combi 15mm D 125x 75 429 107977 Gap Filler UZD 150x37 452
740458 Fin-Ply Combi 15mm D 125x100 429 108010 Gap Filler UZD 200x16 452
740457 Fin-Ply Combi 15mm D 250x 25 429 108011 Gap Filler UZD 250x16 452
740456 Fin-Ply Combi 15mm D 250x 50 429 024600 Girder Claw HB 16
740455 Fin-Ply Combi 15mm D 250x 75 429 075090 Girder GT24 l=0.60m RF 4
740454 Fin-Ply Combi 15mm D 250x100 429 075100 Girder GT24 l=0.90m 4
740469 Fin-Ply Combi 15mm DM 75x 75 429 075120 Girder GT24 l=1.20m 4
740468 Fin-Ply Combi 15mm DM 125x 75 429 075150 Girder GT24 l=1.50m 4
740467 Fin-Ply Combi 15mm DM 250x 75 429 075180 Girder GT24 l=1.80m 4
052829 Fin-Ply Maxi 20mm 5400x2000mm 420 075210 Girder GT24 l=2.10m 4
052823 Fin-Ply Maxi 20mm 7500x2700mm 420 075240 Girder GT24 l=2.40m 4
024630 Fix Strap U100-120, galv. 16 075270 Girder GT24 l=2.70m 4
710340 Flanged Nut M14 SW19, yellow 394 075300 Girder GT24 l=3.00m 4

461
Item no. Specification Page Item no. Specification Page

075330 Girder GT24 l=3.30m 4 056009 GKW Cross Brace 316 261
075360 Girder GT24 l=3.60m 4 056014 GKW Cross Brace 334 261
075390 Girder GT24 l=3.90m 4 056018 GKW Cross Frame 264
075420 Girder GT24 l=4.20m 4 056004 GKW Diagonal Brace 388 262
075450 Girder GT24 l=4.50m 4 056007 GKW Diagonal Brace 423 262
075480 Girder GT24 l=4.80m 4 056030 GKW Fastener Kit 267
075510 Girder GT24 l=5.10m 4 056022 GKW Handrail Post 266
075540 Girder GT24 l=5.40m 4 056008 GKW Horizontal Strut 246 261
075570 Girder GT24 l=5.70m 4 056005 GKW Intermediate Strut 262 262
075600 Girder GT24 l=6.00m 4 056013 GKW Intermediate Strut 324 262
075000 Girder GT24, Spec. Length l=6.00-17.80m 4 056020 GKW Parapet Upright 480 264
028050 Girder Headpiece GT 24, galv. 18 056021 GKW Platform Beam 340 265
028070 Girder Headpiece GT 24/A, galv. 18 056026 GKW Spindle Coupler, cpl. 265
024060 Girder Strap TB, galv. 322 056016 GKW Tension Strut for Boom 263
074610 Girder VT 16K, l=2.45m 5 056027 GKW V-Beam 265
074620 Girder VT 16K, l=2.90m 5 056006 GKW V-Boom Support 261
074630 Girder VT 16K, l=3.30m 5 031555 Glue Component A 380
074640 Girder VT 16K, l=3.60m 5 031556 Glue Component B 380
074650 Girder VT 16K, l=3.90m 5 031554 Glue for Concrete Cones, 5kg Set 380
074660 Girder VT 16K, l=4.90m 5 020600 Gravity Pivot Plate BR 174
074670 Girder VT 16K, l=5.90m 5 061042 Grid Beam SRO 75 282
074990 Girder VT 20K, l=1.45m 5 061044 Grid Beam SRO 75/27 282
074905 Girder VT 20K, l=2.15m 5 061041 Grid Beam SRO 150 282
074910 Girder VT 20K, l=2.45m 5 061043 Grid Beam SRO 150/27 282
074890 Girder VT 20K, l=2.65m 5 108387 Guardrail Connector, Corner 454
074920 Girder VT 20K, l=2.90m 5 108218 Guardrail Connector, Straight 454
074930 Girder VT 20K, l=3.30m 5 108214 Guardrail Filler 454
074940 Girder VT 20K, l=3.60m 5 108545 Guardrail Frame UZG 25 454
074950 Girder VT 20K, l=3.90m 5 025750 Guide Roller SB-A,B 356
074960 Girder VT 20K, l=4.50m 5
074970 Girder VT 20K, l=4.90m 5 021260 Half Round Washer HRS, galv. 41
074980 Girder VT 20K, l=5.90m 5 100863 Handle Lock UJS 435
102217 GKB Abutment Bracket 180 273 037420 Handrail 52, galv. 211
102220 GKB Abutment Platform 180x120 273 037430 Handrail 134, galv. 211
102219 GKB Abutment Platform 180x240 273 102178 Handrail 184, galv. 237
102394 GKB Anchor Bolt M24x200/10° 277 051160 Handrail Connector CB 150
102327 GKB Cantilever Parapet Bracket 180 271 026583 Handrail Extension ASG 192
102185 GKB Cantilever Parapet Platform 180x120 271 103753 Handrail Extension ASU 194
102184 GKB Cantilever Parapet Platform 180x240 270 101079 Handrail Extension ASZ 193
102195 GKB Formwork Projecting Slab 140x120 276 026635 Handrail Extension FB 184
102395 GKB Handrail Post 270 026637 Handrail FB-300 181
102396 GKB Handrail Post 115° 276 103865 Handrail Frame for End Platform 23
102188 GKB Protection Board 90/120 276 035700 Handrail Holder 133
102187 GKB Protection Board 120 271 026528 Handrail Holder 105 ASG 198
102186 GKB Protection Board 240 270 101290 Handrail Holder GT24/VT20 310
102778 GKB Side Formwork 60x120 272 061250 Handrail Holder SGH 284
102779 GKB Side Formwork 60x245 272 104131 Handrail Holder SRU/SRZ 245
102329 GKB Side Formwork Beam 272 026120 Handrail Post 125 for KG 133
102317 GKB Socket M24/15-35 277 051210 Handrail Post 190 152
102193 GKB Soffit Formwork 45x120 272 051190 Handrail Post 200 152
102190 GKB Soffit Formwork 45x245 272 051220 Handrail Post 370 152
102328 GKB Soffit Formwork Beam 272 104675 Handrail Post ASG 198
102196 GKB Spindle for Cantilever Slab Formwork 276 026628 Handrail Post FBP 184
102197 GKB Work Cage 274 106877 Handrail Post Holder DOMINO 111
104181 GKB Work Cage Protection Panel 275 101592 Handrail Post Holder TRIO 71
056029 GKW Anchor Unit 267 034580 Handrail Post HSGP 24
056032 GKW Ballast 2.25 t 260 019040 Handrail Post PD 8 321
056003 GKW Ballast Support 260 108053 Handrail Post RGP 120 407
056019 GKW Boom 600 263 061260 Handrail Post SGP 245
056000 GKW Carriage Beam with Rollers 260 104755 Handrail Post SKS 165
056028 GKW Compression Unit U100-U160 266 054475 Handrail Post TRH 97
056023 GKW Corner Handrail Post 266 106147 Handrail TRH 180 Retractable 97
056002 GKW Cross Beam 280, left 260 106148 Handrail TRH 270 Retractable 97
056001 GKW Cross Beam 280, right 260 025660 Hardware Box 80x120, galv. 413
056012 GKW Cross Beam 350, left 260 025670 Hardware Box 80x120, painted 413
056011 GKW Cross Beam 350, right 260 018040 Head Plate PD 8 318
056010 GKW Cross Brace 270 262 022007 Head Spindle HDK 45 252

462
Item no. Specification Page Item no. Specification Page

109563 Head Spindle Locking Device UJH 435 780356 Hex. Nut ISO 7042 M10-8, galv. 401
022040 Heavy Duty Roller 150kN / Type B-II 247 781053 Hex. Nut ISO 7042 M20-8, galv. 401
022041 Heavy Duty Roller 200kN / Type A-II 247 024090 Hex. Nut DIN 934 M 8, galv. 401
022042 Heavy Duty Roller 300kN / Type B-III 247 030070 Hex. Nut DW 15 SW 30/ 50, galv. 371
022043 Heavy Duty Roller 300kN / Type N-III 247 030550 Hex. Nut DW 15 SW 30/ 50, weldable 371
022044 Heavy Duty Roller 400kN / Type A-III 247 030090 Hex. Nut DW 15 SW 30/108, galv. 360
101773 Heavy Duty Spindle SLS 80/140 243 030580 Hex. Nut DW 20 SW 36/ 60, weldable 361
101774 Heavy Duty Spindle SLS 100/180 243 030590 Hex. Nut DW 20 SW 36/110, weldable 361
101776 Heavy Duty Spindle SLS 140/240 243 710229 Hex. Nut ISO 4032 M16-8, galv. 243
101778 Heavy Duty Spindle SLS 200/300 243 710334 Hex. Nut ISO 4032 M20-8, galv. 243
101779 Heavy Duty Spindle SLS 260/360 243 022250 Hex. Nut ISO 4032 M24-8, galv. 41
026529 Height Adjusting Internal Corner ASE 197 107793 Hinged Step TRP 75
051030 Height Adjusting Unit CB 149 029320 H-Kicker SKS 166
101916 Height Compensation HD, h=200mm 254 065019 HM Concrete Scraper l= 900, b=102 409
026535 Heigth Adjusting ASG 197 065018 HM Concrete Scraper l=1180, b= 54 409
720610 Hex Bolt ISO 4014 M12x70-8.8, galv. 451 065020 HM Concrete Scraper l=1180, b=102 409
710381 Hex Nut ISO 7042 M12-8, galv. 451 065021 HM Concrete Scraper l=1180, b=170 409
061230 Hex. Bolt DIN 6914 M12x140-10.9 288 065025 HM Turnover Board 16/16 mm 409
710284 Hex. Bolt ISO 4014 M 8x 60-8.8, galv. 400 021160 Hook Spanner HKS for GRV 40
710285 Hex. Bolt ISO 4014 M 8x100-8.8, galv. 400 027590 Hook Strap for SB, galv. 18
722859 Hex. Bolt ISO 4014 M 8x140-8.8, galv. 400 024890 Hook Strap HB 2 for VT, galv. 395
104929 Hex. Bolt ISO 4014 M 8x150-8.8, galv. 400 024070 Hook Strap HB 24-100/120, galv. 15
107185 Hex. Bolt ISO 4014 M 8x180-8.8, galv. 400 024080 Hook Strap HB 24-140/160, galv. 15
103518 Hex. Bolt ISO 4014 M 8x190-8.8, galv. 400 024860 Hook Strap HB Clamp 150, galv. 15
710221 Hex. Bolt ISO 4014 M12x 60-8.8, galv. 400 024880 Hook Strap HB for VT, galv. 395
710220 Hex. Bolt ISO 4014 M12x 80-8.8, galv. 400 024610 Hook Strap HBA 30, galv. 16
750330 Hex. Bolt ISO 4014 M12x100-8.8, galv. 400 104930 Hook Strap Uni Doubel HBUD 20-24 15
710299 Hex. Bolt ISO 4014 M16x 60-8.8, galv. 400 104096 Hook Strap Uni Doubel HBUD 24-28 15
710222 Hex. Bolt ISO 4014 M16x 80-8.8, galv. 400 104931 Hook Strap Uni HBU 20-24 15
710219 Hex. Bolt ISO 4014 M16x100-8.8, galv. 243 103845 Hook Strap Uni HBU 24-28 15
710233 Hex. Bolt ISO 4014 M16x110-8.8, galv. 400 023650 Hook Tie DW 15/400, galv. 65
710232 Hex. Bolt ISO 4014 M16x130-8.8, galv. 400 023820 Hook Tie Head DW 15, galv. 65
722169 Hex. Bolt ISO 4014 M16x140-8.8, galv. 400 102029 Horizontal Brace 190 ASW 397
780155 Hex. Bolt ISO 4014 M16x160-8.8, galv. 400 100042 Horizontal Brace UBH 150/150 438
024900 Hex. Bolt ISO 4014 M20x 80-8.8, galv. 400 100047 Horizontal Brace UBH 200/200 438
710226 Hex. Bolt ISO 4014 M20x 90-8.8, galv. 400 106931 Horizontal Brace UBH 250/150 438
024910 Hex. Bolt ISO 4014 M20x100-8.8, galv 243 104356 Horizontal Brace UBH 250/200 438
711078 Hex. Bolt ISO 4014 M20x130-8.8, galv. 400 100049 Horizontal Brace UBH 250/250 438
026430 Hex. Bolt ISO 4014 M24x 70-10.9 137 100051 Horizontal Brace UBH 300/150 438
026220 Hex. Bolt ISO 4014 M24x 80-10.9 400 100053 Horizontal Brace UBH 300/300 438
029560 Hex. Bolt ISO 4014 M24x120-10.9 157 026629 Horizontal Strut 181
029540 Hex. Bolt ISO 4014 M30x130-10.9 168 019300 Horizontal Strut HS 150, galv. 328
029550 Hex. Bolt ISO 4014 M36x130-10.9 169 019330 Horizontal Strut HS 292, galv. 328
780353 Hex. Bolt ISO 4016 M 8x 25-4.6 w.N, galv. 401
035440 Hex. Bolt ISO 4016 M12x 40-4.6, with Nut 401 104029 Industrial Deck UDI 25x 50 438
070100 Hex. Bolt ISO 4016 M12x120-4.6, with Nut 401 105925 Industrial Deck UDI 25x 75 438
027340 Hex. Bolt ISO 4016 M12x180-4.6, with Nut 401 106092 Industrial Deck UDI 25x100 334
018350 Hex. Bolt ISO 4016 M16x160-4.6, with Nut 323 106880 Industrial Deck UDI 25x125 438
103740 Hex. Bolt ISO 4016 M16x280-4.6, with Nut 135 107002 Industrial Deck UDI 25x150 438
710266 Hex. Bolt ISO 4017 M 12x 25-8.8, galv. 400 108380 Industrial Deck UDI 25x200 438
710224 Hex. Bolt ISO 4017 M 12x 40-8.8, galv. 400 108540 Industrial Deck UDI 25x250 438
710231 Hex. Bolt ISO 4017 M 16x 30-8.8, galv. 400 108689 Industrial Deck UDI 25x300 438
710225 Hex. Bolt ISO 4017 M 16x 45-8.8, galv. 400 027190 Insert Socket SW 17 389
780357 Hex. Bolt ISO 4017 M 20x 50-8.8, galv. 400 027200 Insert Socket SW 19 389
710265 Hex. Bolt ISO 4017 M 24x 35-8.8, galv. 400 103721 Inserting Nut TRS, complete 221
706489 Hex. Bolt ISO 4017 M 24x 80-10.9 400 034160 Inside Corner HSE 90 120
026290 Hex. Bolt ISO 4017 M24x 50-10.9 400 034220 Inside Corner HSE 120 120
029420 Hex. Bolt ISO 4017 M30x 70-8.8, galv. 168 034150 Inside Corner HSE 150 120
029430 Hex. Bolt ISO 4017 M36x 70-8.8, galv. 169 101471 Inside Corner Panel VARIO S 75/75x240 8
030970 Hex. Coupler DW 26 SW 46/ 80, weldable 362 101470 Inside Corner Panel VARIO S 75/75x300 8
030980 Hex. Coupler DW 26 SW 46/150, weldable 362 101469 Inside Corner Panel VARIO S 75/75x360 8
710330 Hex. Nut ISO 4032 M12-10, galv. 401 101467 Inside Corner Panel VARIO S 75/75x480 8
710338 Hex. Nut ISO 4032 M16-10, galv. 401 101465 Inside Corner Panel VARIO S 75/75x600 8
706488 Hex. Nut ISO 4032 M24-10, galv. 401 022840 Inside Corner TE 60 58
710336 Hex. Nut ISO 4032 M30-10, galv. 401 022660 Inside Corner TE 120 59
722086 Hex. Nut ISO 7042 M 6-8, galv. 401 022580 Inside Corner TE 270 59
711071 Hex. Nut ISO 7042 M 8-8, galv. 401 054374 Inside Corner TE 330 80

463
Item no. Specification Page Item no. Specification Page

108842 Inside Corner TRH 330-66x66 90 100055 Ledger Brace UBL 150/100 437
108830 Inside Corner TRH 420-66x66 94 102846 Ledger Brace UBL 150/150 437
020830 Inside Panel I 72x120 44 100059 Ledger Brace UBL 200/100 437
020850 Inside Panel I 72x240 44 102862 Ledger Brace UBL 200/150 437
020870 Inside Panel I 72x300 44 100063 Ledger Brace UBL 250/100 437
020890 Inside Panel I 72x360 44 102861 Ledger Brace UBL 250/150 437
021910 Inside Panel I 123x 60 43 100067 Ledger Brace UBL 300/100 437
021930 Inside Panel I 123x120 43 104766 Ledger Brace UBL 300/150 437
102853 Inside Panel I 123x120 2R 43 104780 Ledger UH 25 437
021950 Inside Panel I 123x240 43 100017 Ledger UH 75 437
021430 Inside Panel I 123x300 43 101159 Ledger UH 100 437
021970 Inside Panel I 123x360 43 100021 Ledger UH 150 437
021810 Inside Panel I 240x 60 42 100023 Ledger UH 200 437
021830 Inside Panel I 240x120 42 100025 Ledger UH 250 437
102855 Inside Panel I 240x120 2R 42 100027 Ledger UH 300 437
021850 Inside Panel I 240x240 42 100029 Ledger UH 400 437
021410 Inside Panel I 240x300 42 106626 Ledger with Lap UHP 200 454
021890 Inside Panel I 240x360 42 065067 Lid for Wire Crate Pallet 80x120 413
051630 Intermediate Handrail Post CB 153 105585 Lifting Chain, 2-Strands, 6.0m, adj. 166
026581 Intermediate Platform ASZ 240, Mesh 193 051010 Lifting Eye CB 240, galv. 147
026622 Intermediate Platform FBZ 240 179 026150 Lifting Eye KG 1,0t 132
103284 Internal Corner TEI 120/135° 60 103212 Lifting Fork 1.75t/8.0m 308
103317 Internal Corner TEI 270/135° 60 101862 Lifting Fork 1t/5.0m 307
010200 Internal Corner Waler IRZ 75/75 11 044770 Lifting Gear -3 TRIO 66
044760 Lifting Gear Combi -2 TRIO 66
028110 Kicker AV 348 023690 Lifting Hook 1,5t 66
108135 Kicker AV 210 348 066091 Lifting Hook DOMINO 500kg 110
028120 Kicker AV for RSS III 349 023440 Lifting Pin TRIO 65
108225 Kicker TRH 135 100 019650 Load Tower Brace LS 165, galv. 325
750343 Kicker TRP 118 74 019640 Load Tower Brace LS 186, galv. 325
031652 KK Concrete Cone M24-67/52 140 027150 Locating Shoe for Articulated Joint 135
031658 KK Concrete Cone M24-67/52 BOL 141 037160 Locking Pin Ø 20x205, galv. 209
031653 KK Concrete Cone M30-80/52 383 034530 Locking Strip HSS 60 123
031654 KK Concrete Cone M36-90/52 383 026645 Loop Mounting Head-2 FB 189
022003 Lowering Device HDA 252
051410 Ladder 180/6, galv. 138 028870 Lowering Head 20/24, galv. 296
051420 Ladder 220/6, galv. 138
107738 Ladder 240-360 25 072230 Magnetic Bitholder for SCU 7-9 388
109105 Ladder Base 30 adjustable, galv. 139 022014 Main Beam Clamp HD 40mm, galv. 254
051460 Ladder Base, galv. 210 106183 Main Beam Clamp HD 70mm, galv. 254
104646 Ladder Connector HD 200 256 022010 Main Beam HDT 280 251
103391 Ladder Connector QUATTRO, galv. 227 022009 Main Beam HDT 440 251
103369 Ladder Connector RAPID, galv. 209 022008 Main Beam HDT 880 251
103374 Ladder Connector SRS, galv. 239 061110 Main Beam SLT 150 281
103362 Ladder Connector TRIO, galv. 221 061100 Main Beam SLT 225 281
104064 Ladder Connector VARIO, galv. 216 061160 Main Beam SLT 375 281
104196 Ladder Holder SRS, galv. 239 026580 Main Platform ASG 160/240, Mesh 192
103718 Ladder Hook, galv. 139 026532 Mounting Extension ASG 197
104132 Ladder Safety Cage 75, galv. 138 026638 Mounting Extension ASG for Anchor Loop 189
051450 Ladder Safety Cage 150, galv. 138 026632 Mounting Head FB 186
108566 Ladder TRH 264 97 026536 Mounting Plate ASG 201
108568 Ladder TRH 354 97 066052 Multi Panel Alu DMA 125x75 106
108000 Landing Brace UZB 150 452 066032 Multi Panel Alu DMA 250x75 104
108172 Landing Brace UZB 200 452 066062 Multi Panel DM 75x75 108
108179 Landing Brace UZB 250 452 066042 Multi Panel DM 125x75 106
108034 Landing Brace UZB 90° 452 066024 Multi Panel DM 250x75 104
108412 Landing Cover Plate UZD 150/25 453 034120 Multi Panel HSM 90x45 119
108190 Landing Guardrail UZG 150 453 034110 Multi Panel HSM 120x45 119
019380 Landing Handrail, galv. 329 034100 Multi Panel HSM 150x45 119
101671 Landing Link Panel UAB 30 448 027288 MULTIPROP MP 120 335
019420 Landing PD 8, galv. 329 027289 MULTIPROP MP 250 338
108191 Landing Transom UZL 150 452 027290 MULTIPROP MP 350 338
106608 Landing with Ladder TRH 90 75 027291 MULTIPROP MP 480 338
100707 Lashing 25x5750mm 397 027305 MULTIPROP MP 625 338
031631 Leading Anchor Coupler DW 15 364 027302 MULTIPROP Strap SRZ U100 - U140 341
031632 Leading Anchor Coupler DW 20 364 023860 Multi Panel Alu TAM 270x72 76
031633 Leading Anchor Coupler DW 26 364 023980 Multi Panel Alu TAM 90x72 77

464
Item no. Specification Page Item no. Specification Page

022631 Multi Panel TRIO Structure TSM 120x72 82 066020 Panel D 250x100 104
022541 Multi Panel TRIO Structure TSM 270x72 82 034040 Panel HS 90x 30 119
054345 Multi Panel TRIO Structure TSM 330x72 82 034030 Panel HS 90x 60 119
022630 Multi Panel TRM 120x72 57 034020 Panel HS 90x120 119
022540 Multi Panel TRM 270x72 55 034080 Panel HS 120x 30 118
054344 Multi Panel TRM 330x72 79 034070 Panel HS 120x 60 118
034060 Panel HS 150x 30 118
066066 Outside Corner Angle DAW 75 108 034050 Panel HS 150x 60 118
066046 Outside Corner Angle DAW 125 107 034010 Panel HS 150x 90 118
066028 Outside Corner Angle DAW 250 105 037520 Panel QUATTRO QE 50 226
034260 Outside Corner Angle HSW 90 120 037510 Panel QUATTRO QE 125 226
034240 Outside Corner Angle HSW 120 120 037500 Panel QUATTRO QE 275 226
034250 Outside Corner Angle HSW 150 120 104674 Panel QUATTRO QE 350 226
103850 Outside Corner Coupling AKZ 85/85 14 061030 Panel SDP 75x37.5 280
103330 Outside Corner TEA 120/135° 60 061013 Panel SDP 75x50 280
103337 Outside Corner TEA 270/135° 60 061010 Panel SDP 75x75 280
108785 Outside Corner TRH 330-90x90 90 061020 Panel SDP 150x37.5 280
108808 Outside Corner TRH 420-90x90 94 061011 Panel SDP 150x50 280
020820 Outside Panel O 85x120 44 061000 Panel SDP 150x75 280
020840 Outside Panel O 85x240 44 022820 Panel TR 60x 30 58
020860 Outside Panel O 85x300 44 022810 Panel TR 60x 60 58
020880 Outside Panel O 85x360 44 022800 Panel TR 60x 72 58
021900 Outside Panel O 128x 60 43 022790 Panel TR 60x 90 58
021920 Outside Panel O 128x120 43 022650 Panel TR 120x 30 57
102854 Outside Panel O 128x120 2R 43 022640 Panel TR 120x 60 57
021940 Outside Panel O 128x240 43 022620 Panel TR 120x 72 57
021420 Outside Panel O 128x300 43 022610 Panel TR 120x 90 56
021960 Outside Panel O 128x360 43 022600 Panel TR 120x120 56
021800 Outside Panel O 250x 60 42 022514 Panel TR 120x240 56
021820 Outside Panel O 250x120 42 022560 Panel TR 270x 30 54
102856 Outside Panel O 250x120 2R 42 022550 Panel TR 270x 60 55
021840 Outside Panel O 250x240 42 022530 Panel TR 270x 72 55
021400 Outside Panel O 250x300 42 022520 Panel TR 270x 90 55
021880 Outside Panel O 250x360 42 022510 Panel TR 270x120 54
022570 Panel TR 270x240 54
727165 Pactan Joint Seal, brown 310 ccm 426 054364 Panel TR 330x 30 78
065080 Pallet HS 120x90, galv. 126 054354 Panel TR 330x 60 79
065081 Pallet HS 150x90, galv. 126 054334 Panel TR 330x 72 79
061510 Pallet Lifting Trolley 1500mm 289 054324 Panel TR 330x 90 79
106939 Pallet RP 110x125, painted 412 054314 Panel TR 330x120 78
103434 Pallet RP/2 80x120, galv. 412 054304 Panel TR 330x240 78
103429 Pallet RP/2 80x150, galv. 412 022651 Panel TRIO Structure TS 120x 30 82
061500 Pallet SD 150x 75, galv. 288 022641 Panel TRIO Structure TS 120x 60 82
061530 Pallet SD 150x225, galv. 289 022621 Panel TRIO Structure TS 120x 72 82
065050 Pallet ST 100/2, galv. 335 022611 Panel TRIO Structure TS 120x 90 82
066051 Panel Alu DA 125x 75 106 022601 Panel TRIO Structure TS 120x120 82
066050 Panel Alu DA 125x100 106 022561 Panel TRIO Structure TS 270x 30 82
066023 Panel Alu DA 250x 75 104 022551 Panel TRIO Structure TS 270x 60 82
066021 Panel Alu DA 250x100 104 022531 Panel TRIO Structure TS 270x 72 82
023960 Panel Alu TRA 90x 30 77 022521 Panel TRIO Structure TS 270x 90 82
023950 Panel Alu TRA 90x 60 77 022511 Panel TRIO Structure TS 270x120 82
023900 Panel Alu TRA 90x120 77 022571 Panel TRIO Structure TS 270x240 82
023880 Panel Alu TRA 270x 30 76 054365 Panel TRIO Structure TS 330x 30 82
023870 Panel Alu TRA 270x 60 76 054355 Panel TRIO Structure TS 330x 60 82
023850 Panel Alu TRA 270x 90 76 054335 Panel TRIO Structure TS 330x 72 82
061290 Panel Clip SPK 285 054325 Panel TRIO Structure TS 330x 90 82
066064 Panel D 75x 25 108 054315 Panel TRIO Structure TS 330x120 82
066063 Panel D 75x 50 108 054305 Panel TRIO Structure TS 330x240 82
066061 Panel D 75x 75 108 061280 Panel Wedge Clip SPKK 285
066060 Panel D 75x100 108 065042 Peg 407
066044 Panel D 125x 25 106 023020 Perforated Foundation Tie 68
066043 Panel D 125x 50 106 052824 PERI Beto 21mm 625x2500mm 420
066041 Panel D 125x 75 106 052821 PERI Beto 21mm 1250x2500mm 420
066040 Panel D 125x100 106 052822 PERI Beto 21mm 1500x3000mm 420
066026 Panel D 250x 25 104 052851 PERI Beto-S 21mm 1250x2500mm 420
066025 Panel D 250x 50 104 052820 PERI Birch 21mm 1250x2500mm 420
066022 Panel D 250x 75 104 031675 PERI Hotknife 398

465
Item no. Specification Page Item no. Specification Page

052831 PERI Spruce 21mm 2500x 500mm 421 052002 Plywood Poplar 20mm 2440x1220mm 422
052830 PERI Spruce 21mm 2500x1250mm 421 031001 Plywood Repair Ø 40mm 391
108108 PERI Table Lift PTL 1250 306 031000 Plywood Repair Ø 60mm 391
102098 PERIDRAIN Clip 398 066100 Positioning DEA 90° 105
102110 PERIDRAIN Edge Strip 121x3000x12 398 066097 Positioning DGE 135° external 105
102099 PERIDRAIN Edge Strip Clip 398 066095 Positioning DGE 135° internal 105
031674 PERIDRAIN Fabric 1.50x25.00m 398 026075 Post Extension 150 KG 180 133
031673 PERIDRAIN Fabric 2.80x25.00m 398 026085 Post Extension 150 KG 240 131
022210 Pin for GRV, galv. 41 051050 Post Extension 180 for CB 151
027990 Pin Ø 14x107, galv. 297 026140 Post Extension KG 180 Spec. Length 133
027170 Pin Ø 16x 42, galv. 135 026170 Post Extension KG 240 Spec. Length 131
018050 Pin Ø 16x 65/86, galv. 135 024920 Power-Screwdriver DSSE 642 388
715357 Pin Ø 16x150, galv. with washer 183 108870 Pre-Cast Wall Mounting ASG 204
027690 Pin Ø 19x165, galv. SB-TRIO 69 105317 Pre-cutter HM (Drill Ø 40mm) 391
724500 Pin Ø 20x 42, galv. 227 105331 Pre-cutter VHM (Drill Ø 60mm) 391
105822 Pin Ø 20x102, galv. 33 102988 Pressure Plate Articulated Joint 135
105400 Pin Ø 20x140, galv. 226 031520 Pressure Sprayer 396
026200 Pin Ø 25x160 for KG, galv. 135 030460 Pretension Jack for DW 15/20/26 378
026644 Pipe Bracing Connector, galv. 182 023560 Projection Waler TVR 45/45 64
750134 Plastic Sleeve Corner DW 20 426 106434 Prop PEP 10-250 A 344
750135 Plastic Sleeve DW 20 426 106433 Prop PEP 10-300 A 344
105843 Platform ASG 70-100/240 203 106432 Prop PEP 10-350 A 344
105844 Platform ASG 70-100/298 203 106429 Prop PEP 10-400 A 344
020320 Platform Beam BR U100 174 028760 Prop PEP 20 G 410 346
020510 Platform Beam BR U120 174 028730 Prop PEP 20 N 260 346
020310 Platform Beam BR U140 174 028740 Prop PEP 20 N 300 346
020520 Platform Beam BR U160 174 028750 Prop PEP 20 N 350 346
105480 Platform Beam VARIO, left 24 103058 Prop PEP 20-300 345
105484 Platform Beam VARIO, right 24 103059 Prop PEP 20-350 345
105823 Platform Bracket VARIO VBK 90 24 103060 Prop PEP 20-400 345
051120 Platform Connection CB 160 148 103061 Prop PEP 20-500 345
100813 Platform Handrail 80 VARIO 25 028770 Prop PEP 30 G 300 346
051200 Platform Post 225 151 028780 Prop PEP 30 G 350 346
061060 Platform SDB 150 287 103066 Prop PEP 30-150 345
061061 Platform SDB 225 287 103067 Prop PEP 30-250 345
061062 Platform SDB 300 287 103062 Prop PEP 30-300 345
101273 Platform Strut 167 VARIO 25 103063 Prop PEP 30-350 345
101269 Platform Strut 246 VARIO 25 103065 Prop PEP 30-400 345
054504 Platform TRP 60 72 022006 Prop Section HDS 30 250
054503 Platform TRP 72 72 022005 Prop Section HDS 90 250
054502 Platform TRP 90 72 022004 Prop Section HDS 270 250
054501 Platform TRP 120 72 103993 Prop Section HDSS 210 250
054506 Platform TRP 120 with Hatch 72 061200 Prophead SSK 282
054500 Platform TRP 240 72 101404 Protection Board 100 8
054505 Platform TRP 240 with Hatch 72 101319 Protection Board 125 8
103203 Platform VARIO 100x100 22 101318 Protection Board 187.5 8
102415 Platform VARIO 100x125 with Hatch 22 101311 Protection Board 250 8
102920 Platform VARIO 100x187.5 22 101464 Protection Board IE 75/75 8
105986 Platform VARIO 100x250 22 028990 Push-Pull Prop RS 1000, galv. 350
105985 Platform VARIO 100x250 with Hatch 22 103800 Push-Pull Prop RS 1400, galv. 350
065036 Plug DR 22 374 028210 Push-Pull Prop RS I 349
065060 Plug for Stopend Sleeve DW 15 406 028220 Push-Pull Prop RS II 349
031360 Plug FZR 22mm 374 028010 Push-Pull Prop RSS I 100
030300 Plug Ø 20/24mm 67 028020 Push-Pull Prop RSS II 35
030290 Plug Ø 20mm 112 028030 Push-Pull Prop RSS III 349
030320 Plug Ø 25mm for TRS 221 107546 Push-Pull Prop TRP 150-210, cpl. 74
026250 Plug Ø 26mm for Anchor Sleeve M24 141 054511 Push-Pull Prop TRP 240-300, cpl. 74
052010 Plywood 4mm 2500x1250mm 421 054512 Push-Pull Prop TRP 300-360, cpl. 74
052020 Plywood 8mm 2500x1250mm 421 054461 Push-Pull Prop with Kicker Brace TRH 116 100
026639 Plywood Board FB 300 169x298 181
026641 Plywood Board FBN-2 81x298 181 034660 Quick Connector HSSA 10/12, galv. 124
026640 Plywood Board FBZ 240 168x236 181 034670 Quick Connector HSSA 14/16, galv. 124
052622 Plyw. Chin. Film coated 21mm 1250x2500mm 421 018270 Quick Jack Nut PD 8, galv. 319
052800 Plywood Elliottis Pine 20mm 2500x1250mm 422 025200 Quick Release Corner SSE 1.0m 20
061066 Plywood Planking SDB 150 287 025210 Quick Release Corner SSE 2.0m 20
061067 Plywood Planking SDB 225 287 025220 Quick Release Corner SSE 3.0m 20
061068 Plywood Planking SDB 300 287 025230 Quick Release Corner SSE 4.0m 20

466
Item no. Specification Page Item no. Specification Page

025240 Quick Release Corner SSE 5.0m 20 100901 SB-L Tension Strut, l=740mm 359
025250 Quick Release Corner SSE Spec. Length 20 066085 Scaffold Bracket DG 85 111
018340 Quick Release Spindle, galv. 320 022017 Scaffold Bracket HD 75 256
024640 Quick Str. Hook Strap 24-100/140, galv. 16 034560 Scaffold Bracket HSK 80 125
108339 Quick Strap MPB 24 342 023670 Scaffold Bracket TRG 80 70
023590 Scaffold Bracket TRG 100/112 71
051040 Rack CB 240 147 023680 Scaffold Bracket TRG 120 70
098217 Radius Template RUNDFLEX E85/I72 49 027110 Scaffold Jack GB 80 21
099540 Radius Template RUNDF. O250/I240, O128/I123 49 029310 Scaffold Jack SKS 90 165
027100 Ratchet Lever SW 17 130 029470 Scaffold Mounting Ring 15, galv. 157
027180 Ratchet Lever SW 19 146 029480 Scaffold Mounting Ring 2-20, galv. 168
021790 Ratchet Spanner SW 24 "Combi" 49 029490 Scaffold Mounting Ring 2-26, galv. 169
029610 Ratchet Wrench 1" 170 026417 Scaffold Tube Cost per Cut 158
072180 Ratchet Wrench 1/2 " 170 027298 Scaffold Tube Coupler MG-A/C 341
051764 Ratchet Wrench 3/4" 389 027299 Scaffold Tube Coupler MG-B/D 341
026582 Rear Handrail Section ASE 195 034690 Scaffold Tube Holder HSGH 124
101085 Rear Handrail Section ASG 192 026416 Scaffold Tube, Alu 48.3x4.0, per m 394
101083 Rear Handrail Section ASZ 193 026411 Scaffold Tube, Steel 48.3x3.2, galv. l=1.0m 335
001002 Reinforcement Scaffold Addition 200x150/72 442 026412 Scaffold Tube, Steel 48.3x3.2, galv. l=2.0m 34
001006 Reinforcement Scaffold Addition 250x150/72 442 026413 Scaffold Tube, Steel 48.3x3.2, galv. l=3.0m 34
001010 Reinforcement Scaffold Addition 300x150/72 442 026414 Scaffold Tube, Steel 48.3x3.2, galv. l=4.0m 335
001003 Reinforcement Scaffold Addition Plus 200x72 442 026419 Scaffold Tube, Steel 48.3x3.2, galv. l=5.0m 335
001007 Reinforcement Scaffold Addition Plus 250x72 442 026418 Scaffold Tube, Steel 48.3x3.2, galv. l=6.0m 335
001011 Reinforcement Scaffold Addition Plus 300x72 442 026415 Scaffold Tube, Steel 48.3x3.2, galv. per m 158
001000 Reinforcement Scaffold Basic 200x150/72 442 026647 Screw Plate DW 15/115, galv. 73
001004 Reinforcement Scaffold Basic 250x150/72 442 024310 Screwnail 70 mm, galv. 403
001008 Reinforcement Scaffold Basic 300x150/72 442 024350 Screwnail 90 mm, galv. 403
001001 Reinforcement Scaffold Basic Plus 200x72 442 030960 Screw-On Cone M 24/DW 20, galv. 141
001005 Reinforcement Scaffold Basic Plus 250x72 442 017040 Screw-On Coupling AK 48, galv. 158
001009 Reinforcement Scaffold Basic Plus 300x72 442 071217 Sealing Hole Ø 40mm 426
031440 Release Agent Bio Clean 20 L 396 071216 Sealing Hole Ø 60mm 426
031455 Release Agent Bio Clean 208 L 396 710262 Selftapping Screw 5.5x45 TX 30, galv. 49
031420 Release Agent PERI CLean 20 L 396 105524 Shaft Panel TSE 120 60
031435 Release Agent PERI CLean 208 L 396 105523 Shaft Panel TSE 270 60
071211 Repair Service RG 270/330x120/90/72 426 105525 Shaft Panel TSE 330 81
071210 Repair Service RG 270x240, 330x240 426 022018 Shear Pin HDA 252
071213 Repair Service RG IE, Panel TRM, TR 426 071358 Shop Drawings for ASG 160, FB 180 430
071212 Repair Service RG Panel h=120/90/60 426 071359 Shop Drawings for KG, CB, SKS 430
071206 Repair Service RK 270/330x120/90/72 426 071356 Shop Drawings for MULTIFLEX 430
071205 Repair Service RK 270x240, 330x240 426 071355 Shop Drawings for SKYDECK 430
071208 Repair Service RK IE, Panel TRM, TR 426 071357 Shop Drawings for Slab Tables 430
071207 Repair Service RK Panel h=120/90/60 426 071361 Shop Drawings for Special Forms 430
071215 Repair Service RK SKYDECK Filler Panels 428 071351 Shop Drawings for TRIO, DOMINO, HANDSET 430
071214 Repair Service RK SKYDECK Panel 150x75 428 071352 Shop Drawings for VARIO, RUNDFLEX 430
031550 Repoxal Glue, 1kg 374 107801 Shoring Brace UBS 150/100 437
107019 Retainer Corner Platform TRP 73 107810 Shoring Brace UBS 150/150 437
105318 Reverse Plate HM (Ø 40mm) 391 101706 Shutter Joint Profile 21/40 l=3.00m 20
105311 Reverse Plate Twist Drill HM Ø 40 mm 391 051610 Side Handrail Post 139
105326 Reverse Plate Twist Drill VHM Ø 60mm 391 031645 SK Anchor Cone DW 15 381
105330 Reverse Plate VHM 28,5 (Ø 60mm) 391 031646 SK Anchor Cone DW 20 381
019560 Ring Screw M 16, galv. 327 031647 SK Anchor Cone DW 26 381
780304 Rivet DIN 7337 A 5x12, Alu 402 031650 SK Concrete Cone DW 20, 67/60 382
722318 Rivet DIN 7337 A 6x10, Steel 402 031651 SK Concrete Cone DW 26, 100/60 382
722083 Rivet DIN 7337 A 8x23, Alu 402 104643 SK Lead Cone DW 15 382
780305 Rivet DIN 7337 B 5x20, GAV 402 031648 SK Sealing Washer DW 20 381
780302 Rivet DIN 7337 B 5x25, Alu 402 031649 SK Sealing Washer DW 26 381
730050 Rivet DIN 7337 B 5x30, Alu 402 031639 SK Sealing Washer UNI DW 15 379
044890 Rivet Gun BZ 390 031656 SK Tongs for Concrete Cone 67 384
031140 Rock Anchor DW 15 360 031657 SK Tongs for Concrete Cone 100 384
108795 Rock Anchor HB DW 15 360 031671 SK Tube Seal 22 382
106081 Router DW 625-E 391 031672 SK Tube Seal 28 382
071209 RS Cleaning Service SKYDECK 428 031677 SK Tube Seal 42 382
071202 RS Cleaning Service TRIO 426 065063 Slab Stopend Bar 105 406
750132 Sleeve 18 - DW 20, Base Piece 426
026530 Safety Net 6.0x2.0m/100mm mesh 184 750133 Sleeve 18 - DW 20, Head Piece 426
019620 Safety Strap for PD8, galv. 320 108869 Sleeve for pre-cast wall mounting ASG 204
100903 SB-L Anchor Bracket 359 051430 Sliding Hatch Cover 139

467
Item no. Specification Page Item no. Specification Page

072170 Socket SW 13-1/2" l=80mm 388 100012 Standard UVR 300 436
029620 Socket SW 19-1/2" 170 107930 Standard UVR 300 Public 453
102784 Socket SW 24-1/2" 246 100013 Standard UVR 400 436
029650 Socket SW 27-1/2" 384 071290 Static Calculation 430
102785 Socket SW 36-3/4" 277 022026 Steel Beam Clamp IPB 300-1000 254
029630 Socket SW 46-1" 170 100355 Steel Deck UDS 32x150 450
029640 Socket SW 55-1" 170 106585 Steel Deck UDS 32x150 Public 450
031480 Socket Wrench SW 36, cromatized 157 100373 Steel Deck UDS 32x200 450
020620 Spacer for Platform Beam BR 175 106586 Steel Deck UDS 32x200 Public 450
054464 Spacer TRH 15-30 98 100375 Steel Deck UDS 32x250 450
065030 Spacer Tube rough DR 22 l=0.21m 374 106587 Steel Deck UDS 32x250 Public 450
065031 Spacer Tube rough DR 22 l=0.27m 374 102033 Steel Traverse 140/220 ASW 397
065027 Spacer Tube rough DR 22 l=2.00m 140 010600 Steel Waler SRZ U100, l=0.95m 10
031626 Spacer Tube rough DR 28 l=3.00m 376 010030 Steel Waler SRZ U100, l=1.20m 10
031627 Spacer Tube rough DR 32 l=3.00m 364 010610 Steel Waler SRZ U100, l=1.45m 10
031634 Spacer Tube rough DR 42 l=3.00m 364 010060 Steel Waler SRZ U100, l=1.825m 10
030820 Spanner for Clamp Lock, galv. 393 010070 Steel Waler SRZ U100, l=1.95m 10
031490 Spanner for Tension Rod 20/26, galv 365 010050 Steel Waler SRZ U100, l=2.45m 10
027211 Spanner SW 46, for SB 365 010120 Steel Waler SRZ U100, l=2.95m 10
027213 Spanner SW 70, for SB 365 010080 Steel Waler SRZ U100, Spec. Length 11
027210 Spanner SW 80, for SB 365 010150 Steel Waler SRZ U120, Spec. Length 11
102109 Spax Screw SK 3.5x45 398 010090 Steel Waler SRZ U140, Spec. Length 11
024950 Spax Screw TX 30 6x100, yellow galv. 403 103868 Steel Waler Universal SRU U120 l=0.72m 12
024960 Spax Screw TX 30 6x120, yellow galv. 403 103871 Steel Waler Universal SRU U120 l=0.97m 12
024970 Spax Screw TX 30 6x140, yellow galv. 403 103874 Steel Waler Universal SRU U120 l=1.22m 12
024980 Spax Screw TX 30 6x160, yellow galv. 403 103877 Steel Waler Universal SRU U120 l=1.47m 12
024990 Spax Screw TX 30 6x180, yellow galv. 403 103886 Steel Waler Universal SRU U120 l=1.72m 12
024550 Spax Screw TX 30 8x 20 403 103889 Steel Waler Universal SRU U120 l=1.97m 12
030440 Spherical Nut DW 15, galv. 209 103898 Steel Waler Universal SRU U120 l=2.22m 12
021290 Spindle Connector GRV 41 103892 Steel Waler Universal SRU U120 l=2.47m 12
018120 Spindle PD 8 l = 750/400, galv. 319 103929 Steel Waler Universal SRU U120 l=2.72m 12
018030 Spindle PD 8 l =1160/800, galv. 319 103903 Steel Waler Universal SRU U120 l=2.97m 12
019800 Spindle Safety Strap ST 100, galv. 335 103906 Steel Waler Universal SRU U120 l=3.47m 12
025730 Spindle TR 60x9/43 356 103915 Steel Waler Universal SRU U120 l=3.97m 12
107348 Splice MPB 24 342 103918 Steel Waler Universal SRU U120 l=4.47m 12
031530 Spray Nozzle (0,1F 110) 396 103922 Steel Waler Universal SRU U120 l=4.97m 12
105588 Spreader Beam 2.5t 166 103925 Steel Waler Universal SRU U120 l=5.47m 12
750040 Spring 4.6x18x1338 mm 426 103928 Steel Waler Universal SRU U120 l=5.97m 12
066099 Stacking Aid DOMINO DSW 114 103943 Steel Waler Universal SRU U140 l=4.97m 12
750303 Stacking Aid TRIO DW 20 65 100778 Stiffening Board, timber, 420x400mm 304
066094 Stacking Device DOMINO, galv. 113 065128 Stiffening Panel ASP, 60.0x125.0 cm 417
023390 Stacking Device TRIO, galv. 65 065129 Stiffening Panel ASP, 60.0x150.0 cm 417
019910 Stacking Frame ST 100, galv. 332 065127 Stiffening Panel ASP, 87.0x 74.5 cm 417
100742 Stair Guardrail UAG 449 101934 Stopend Panel DOMINO AT 125x3 109
100830 Stair Guardrail UAH Inside 449 108856 Stopend Panel DOMINO AT 125x5 109
108189 Stair Guardrail UZG 250/150 451 101927 Stopend Panel DOMINO AT 250x3 109
019410 Stair Handrail, galv. 329 108855 Stopend Panel DOMINO AT 250x5 109
107448 Stair Stringer UZS 250/150 450 101935 Stopend Panel DOMINO MTF 125x20 109
001044 Stair Tower Anchoring 443 101936 Stopend Panel DOMINO MTF 125x24/25 109
001037 Stair Tower Basic-P 250x150 443 101937 Stopend Panel DOMINO MTF 125x30 109
001041 Stair Tower Basic-P 300x150 443 101940 Stopend Panel DOMINO MTF 125x35/36 109
001036 Stair Tower Basic-T 250x150 443 101928 Stopend Panel DOMINO MTF 250x20 109
001040 Stair Tower Basic-T 300x150 443 101929 Stopend Panel DOMINO MTF 250x24/25 109
001038 Stair Tower Plus 250x150 443 101930 Stopend Panel DOMINO MTF 250x30 109
001042 Stair Tower Plus 300x150 443 101931 Stopend Panel DOMINO MTF 250x35/36 109
019540 Stair Tower Stabilizer 140, galv. 327 023030 Stopend Panel TR 120x24 62
019550 Stair Tower Stabilizer Special Leng 327 023040 Stopend Panel TR 270x24 62
001039 Stair Tower Top 250x150 443 023050 Stopend Panel TR 330x24 81
001043 Stair Tower Top 300x150 443 023067 Stopend Panel TRIO AT 120x3 61
100737 Staircase UAS 250/200 448 105978 Stopend Panel TRIO AT 120x5 61
100738 Staircase UAS 300/200 448 023060 Stopend Panel TRIO AT 270x3 61
017020 Standard Coupling NK 48/48, galv. 34 105953 Stopend Panel TRIO AT 270x5 61
017030 Standard Coupling NK 60/48, galv. 322 023068 Stopend Panel TRIO MT 120x20 61
102859 Standard UVR 50 436 023069 Stopend Panel TRIO MT 120x24/25 61
101306 Standard UVR 100 436 023071 Stopend Panel TRIO MT 120x30 61
102860 Standard UVR 150 436 023072 Stopend Panel TRIO MT 120x35/36 61
100009 Standard UVR 200 436 023061 Stopend Panel TRIO MT 270x20 61

468
Item no. Specification Page Item no. Specification Page

023062 Stopend Panel TRIO MT 270x24/25 61 710290 T-Head Bolt M14x98/110, galv. 394
023064 Stopend Panel TRIO MT 270x30 61 030860 Threaded Anchor Plate DW 20 141
023065 Stopend Panel TRIO MT 270x35/36 61 030870 Threaded Anchor Plate DW 26 169
023081 Stopend Panel TRIO MTF 120x20 61 030840 Threaded Plate DW 15 140
023080 Stopend Panel TRIO MTF 120x24/25 61 030150 Tie Rod B 15 l=0.30m 370
023078 Stopend Panel TRIO MTF 120x30 61 030740 Tie Rod B 15 Spec. Length 370
023079 Stopend Panel TRIO MTF 120x35/36 61 030745 Tie Rod B 20 Spec. Length 375
023074 Stopend Panel TRIO MTF 270x20 61 022030 Tie Rod Cylinder Yoke SW, galv. 242
023075 Stopend Panel TRIO MTF 270x24/25 61 030005 Tie Rod DW 15 l=0.50m 370
023077 Stopend Panel TRIO MTF 270x30 61 030010 Tie Rod DW 15 l=0.85m 215
023076 Stopend Panel TRIO MTF 270x35/36 61 030480 Tie Rod DW 15 l=1.00m 370
065039 Stopend Sleeve DW 15 373 030490 Tie Rod DW 15 l=1.20m 370
065040 Stopend Trestle 407 030170 Tie Rod DW 15 l=1.50m 370
021660 Strap 24 for RUNDFLEX, galv. 46 030020 Tie Rod DW 15 l=1.70m 370
034360 Striking Fillet HSL 90 122 030180 Tie Rod DW 15 l=2.00m 370
034380 Striking Fillet HSL 120 122 030710 Tie Rod DW 15 l=2.50m 370
034350 Striking Fillet HSL 150 122 030720 Tie Rod DW 15 l=3.00m 370
065104 Striking Strip ASP, WD 20, 70/21 416 030730 Tie Rod DW 15 l=3.50m 370
101856 Striking Strip ASP, WD 20, 70-250/21 416 030160 Tie Rod DW 15 l=6.00m 370
065110 Striking Strip ASP, WD 24, 70/21 416 030030 Tie Rod DW 15 Spec. Length 140
101857 Striking Strip ASP, WD 24, 70-250/21 416 030700 Tie Rod DW 20 Spec. Length 168
065116 Striking Strip ASP, WD 25, 70/21 416 030640 Tie Rod DW 20, l=0.50m 361
101859 Striking Strip ASP, WD 25, 70-250/21 416 030641 Tie Rod DW 20, l=1.00m 361
065122 Striking Strip ASP, WD 30, 70/21 416 030680 Tie Rod DW 20, l=6.00m 375
101861 Striking Strip ASP, WD 30, 70-250/21 416 030340 Tie Rod DW 26 Spec. Length 169
107162 Stringer Frame UZF 150 451 030645 Tie Rod DW 26, l=0.50m 362
106582 Stringer Frame UZF 200 451 030646 Tie Rod DW 26, l=1.00m 362
106583 Stringer Frame UZF 250 451 030690 Tie Rod DW 26, l=6.00m 377
102031 Stripping Cart ASW 465, complete 290 108129 Tie Rod Spanner DW 15 370
035500 Stripping Cart, Alu 290 108719 Tie Rod Spanner TRH SW 22 98
051060 Strongback 270 CB 148 031070 Tie Rod Wrench 15, galv. 372
051150 Strongback 380 CB 148 031050 Tie Rod Wrench 20, galv. 376
051080 Strongback Connector-2, galv. 149 054480 Tie TRH 15-30/99 98
071291 Structural Calculation for Approval 430 037150 Tie Yoke DW 15 209
054518 Strut TRP 74 024210 Tie Yoke SKZ 17
071364 Supervisor per Day 430 027296 Tilting Base MKF 340
026623 Support Extension 200 FB-2 180 027297 Tilting Forkhead MKK 340
026624 Support Extension 300 FB-2 180 034650 Timber Holder HSKH 14, galv. 124
026521 Support Extension 370 ASG 199 034620 Timber Holder HSKH 22, galv. 124
019630 Support Ledger PD 8, galv. 325 034640 Timber Strut Coupling HSRB 125
017070 Swivel Coupling DK 33.7/38, galv. 329 102030 Toe-Board Set 70/190 ASW 397
102400 Swivel Coupling DK 38/48, galv. 394 104032 Tool Box TRH 96
017010 Swivel Coupling DK 48/48, galv. 158 101309 Top Standard UVH 50 436
017000 Swivel Coupling DK 60/48, galv. 322 100000 Top Standard UVH 100 436
100003 Top Standard UVH 150 436
061052 Table Connector STV 288 100005 Top Standard UVH 200 436
072700 Table Module VT 2.00/2.15x4.00m 304 100007 Top Standard UVH 250 436
072710 Table Module VT 2.00/2.15x5.00m 304 034610 Top Tie Bracket HSAH, galv. 123
072720 Table Module VT 2.50/2.65x4.00m 304 066086 Top Tie Bracket DAH, galv. 113
072730 Table Module VT 2.50/2.65x5.00m 304 023630 Top Tie Bracket-2 AH, galv. 68
019200 Table Roller with Winch 324 106087 Top Tie TRH 98
028715 Table Striking Trolley 2t, l=170 305 105346 Torx for Centrepivot Ø 60mm 391
028710 Table Striking Trolley 2t, l=200 305 105347 Torx for Pre-cutter Ø 60 391
100956 Table Swivel Head, Lower Part 303 105327 Torx for Reverse Plate Ø 60mm 391
100954 Table Swivel Head, Middle Part 303 105367 Torx for Reverse Plate/Pre-cutter Ø 40mm 391
100955 Table Swivel Head, Upper Part 303 026533 Transportation Fork ASG 160, galv. 200
107007 Tension Anchor Connector CB 150 026646 Transportation Fork FB, galv. 185
107008 Tension Anchor Connector Wall 150 061520 Transportation Fork SUG, galv. 286
029300 Tension Anchor SKS 20 167 019240 Transportation Wheel 80 324
029290 Tension Anchor SKS 26 167 105791 Transportation Wheel QUATTRO 230
051250 Tension Belt L=5.70 m / 25 KN 150 066093 Transporting Device DOMINO 114
101621 Tension Relase Plate SB DW 26 362 065051 Trestle P 80 408
027540 Tension Rod 100/M 30 with Nut 363 061022 Triangular Frame SDR 75x75 285
027230 Tension Rod 135/M 30 with Nut 363 061016 Triangular Frame SDR 75x75/27 285
061310 Tension Sleeve SAO 283 061021 Triangular Frame SDR 150x75 285
028590 Tension Strap 16-25, galv. 297 061015 Triangular Frame SDR 150x75/27 285
028550 Tension Strap GT24, 22-31, galv. 302 030190 Triangular Wingnut DW 15, galv. 371

469
Item no. Specification Page Item no. Specification Page

107152 Tripod PEP 10 298 054401 Wall Thickness Comp. WDA 330x 6 80
027860 Tripod, galv. 298 054435 Wall Thickness Comp. WDA 330x10, Alu 80
022021 Trolley HD 254 023281 Wall Thickness Comp. WDAS 120x 5 83
103716 TRS Clamp DW 15, galv. 221 023291 Wall Thickness Comp. WDAS 120x 6 83
024540 TSS-Torx 6x40, galv. 158 023181 Wall Thickness Comp. WDAS 270x 5 83
024470 TSS-Torx 6x60, galv. 20 023191 Wall Thickness Comp. WDAS 270x 6 83
024690 TSS-Torx 6x80, galv. 20 054395 Wall Thickness Comp. WDAS 330x 5 83
103444 TSS-Torx 8x38, galv. 403 054405 Wall Thickness Comp. WDAS 330x 6 83
104892 TSS-Torx 8x44, galv. 403 780354 Washer ISO 7089-200 HV A 8, galv. 402
104647 TSS-Torx 8x58, galv. 403 780702 Washer ISO 7089-200 HV A 12, galv. 402
103443 TSS-Torx 8x78, galv. 403 725574 Washer ISO 7089-200 HV A 14, galv. 402
065074 Turnbuckle 3.0kN, M 12 286 711074 Washer ISO 7089-200 HV A 16, galv. 402
021600 T-Waler 46 706454 Washer ISO 7089-200 HV A 20, galv. 402
021580 T-Waler 800 46 750350 Washer ISO 7093-1 200 HV A 12, galv. 402
710886 Washer ISO 7093-1 200 HV A 16, galv. 402
028500 UNIPORTAL Head, galv. 302 031150 Waterstop Centrepiece DW 15 371
103737 Universal Coupling UK 70 14 066081 Wedge Clamp DKS 110
072210 Universal Power Srewdriver SCU 7-9 388 028060 Wedge Headpiece SRZ/SRU 18
028000 Universal Tripod, galv. 298 024250 Wedge K, galv. 17
023920 Universal Waler 245 67 024240 Wedge KZ, galv. 17
065056 UZ Beam Bracket 40 315 024590 Wedge Lowering Device 420 kN 253
065057 UZ Beam Width Adjustment Bar 80 315 031300 Weld on Anchor DW 15 373
065065 UZ Beam Width Adjustment Bar 129 315 701991 Welding Plate 50x20x120 28
065058 UZ Beam Yoke Waler 100 315 010400 Welding Unit for KRZ 11
022460 Welding Unit for RKR 26
010440 VARIO Steel Waler VSRZ-24 U100 l=1.20/12 10 012300 Welding Unit for SSRZ 214
010420 VARIO Steel Waler VSRZ-24 U100 l=2.45/12 10 010500 Welding Unit for VSRZ 10
102035 Vertical Frame 70/ 90 ASW 397 010490 Welding Unit for VSRZ/12 10
102034 Vertical Frame 70/120 ASW 397 102037 Wind Security Clip 60 ASW 397
065105 Vertical Reveal ASP, WD 20, 193.5 cm 416 022027 Wing Nut Spanner HD 252
065111 Vertical Reveal ASP, WD 24, 193.5 cm 416 030110 Wingnut Counterplate DW 15, galv. 370
065117 Vertical Reveal ASP, WD 25, 193.5 cm 416 030100 Wingnut DW 15, galv. 215
065123 Vertical Reveal ASP, WD 30, 193.5 cm 416 030990 Wingnut DW 20, galv. 361
029150 V-Strongback 12-2 163 030370 Wingnut Pivot Plate DW 15 , galv. 101
029160 V-Strongback 12-3 163 065068 Wire Crate Pallet 80x120, galv. 413
029170 V-Strongback 14-3 163 065016 Wire Crate Pallet 80x120, painted 413
029180 V-Strongback 14-4 163 001013 Work Platform Basic-P 250x150 444
031580 V-Tie Holder DW 15 364 001017 Work Platform Basic-P 250x200 444
031590 V-Tie Holder DW 20 364 001021 Work Platform Basic-P 250x250 444
031600 V-Tie Holder DW 26 364 001025 Work Platform Basic-P 300x200 444
001029 Work Platform Basic-P 300x250 444
023551 Waler 85 64 001033 Work Platform Basic-P 300x300 444
021640 Waler Bolt for RUNDFLEX, galv. 47 001012 Work Platform Basic-T 250x150 444
025760 Waler Connector SB-A,B,C 356 001016 Work Platform Basic-T 250x200 444
022002 Waler Hinge adjustable, galv. 242 001020 Work Platform Basic-T 250x250 444
022001 Waler Hinge, galv. 242 001024 Work Platform Basic-T 300x200 444
023930 Waler Stop 67 001028 Work Platform Basic-T 300x250 444
065045 Wall Clamp 55 408 001032 Work Platform Basic-T 300x300 444
065076 Wall Clamp 75 408 001014 Work Platform Plus 250x150 444
065046 Wall Clamp 105 408 001018 Work Platform Plus 250x200 444
061051 Wall Holder SWH-2 283 001022 Work Platform Plus 250x250 444
104958 Wall Scaffold Hinge ASE 201 001026 Work Platform Plus 300x200 444
026531 Wall Scaffold Hinge ASG 201 001030 Work Platform Plus 300x250 444
026990 Wall Scaffold Hinge FB 186 001034 Work Platform Plus 300x300 444
026110 Wall Scaffold Hinge WGS 136 001015 Work Platform Top 250x150 444
066068 Wall Thickness Comp. DWD 75x 5 108 001019 Work Platform Top 250x200 444
066048 Wall Thickness Comp. DWD 125x 5 107 001023 Work Platform Top 250x250 444
101964 Wall Thickness Comp. DWD 125x10 107 001027 Work Platform Top 300x200 444
066030 Wall Thickness Comp. DWD 250x 5 105 001031 Work Platform Top 300x250 444
101986 Wall Thickness Comp. DWD 250x10 105 001035 Work Platform Top 300x300 444
023282 Wall Thickness Comp. WDA 120x 5 63
023292 Wall Thickness Comp. WDA 120x 6 63 018610 Yoke Clamp 24, painted 323
023990 Wall Thickness Comp. WDA 120x10, Alu 63 018600 Yoke Plate, galv. 322
023182 Wall Thickness Comp. WDA 270x 5 63 028580 Yoke Waler UNIPORTAL 302
023192 Wall Thickness Comp. WDA 270x 6 63
023995 Wall Thickness Comp. WDA 270x10, Alu 63 104278 Zyl Bolt ISO 4762 M12x60-8.8, galv. 453
054391 Wall Thickness Comp. WDA 330x 5 80 104528 Zyl Bolt ISO 4762 M12x60-8.8, galv. 451

470
471
Numerical Index
Item no. Specification Page Item no. Specification Page

001000 Reinforcement Scaffold Basic 200x150/72 442 012060 Column Main Waler SGRZ 181 214
001001 Reinforcement Scaffold Basic Plus 200x72 442 012080 Column Waler SSRZ U100 Spec. Length 214
001002 Reinforcement Scaffold Addition 200x150/72 442 012090 Column Waler SSRZ U140 Spec. Length 214
001003 Reinforcement Scaffold Addition Plus 200x72 442 012150 Column Waler SSRZ-24 97/ 85 214
001004 Reinforcement Scaffold Basic 250x150/72 442 012160 Column Waler SSRZ-24 113/101 214
001005 Reinforcement Scaffold Basic Plus 250x72 442 012300 Welding Unit for SSRZ 214
001006 Reinforcement Scaffold Addition 250x150/72 442 013010 Coupling VKZ 99 13
001007 Reinforcement Scaffold Addition Plus 250x72 442 013020 Coupling VKZ 147 13
001008 Reinforcement Scaffold Basic 300x150/72 442 013030 Coupling VKZ 211 13
001009 Reinforcement Scaffold Basic Plus 300x72 442 013080 Coupling VKZ Special Length 13
001010 Reinforcement Scaffold Addition 300x150/72 442 013130 Corner Coupling EKZ 76/76 13
001011 Reinforcement Scaffold Addition Plus 300x72 442 013140 Corner Coupling EKZ 95/43 13
001012 Work Platform Basic-T 250x150 444 013180 Corner Coupling EKZ Spec. Length 13
001013 Work Platform Basic-P 250x150 444 013210 Articulated Coupling GKZ 76/76 13
001014 Work Platform Plus 250x150 444 013220 Articulated Coupling GKZ 60/60 13
001015 Work Platform Top 250x150 444 013230 Articulated Coupling GKZ Spec. Length 13
001016 Work Platform Basic-T 250x200 444 013240 Bulkhead Tie 17
001017 Work Platform Basic-P 250x200 444 017000 Swivel Coupling DK 60/48, galv. 394
001018 Work Platform Plus 250x200 444 017010 Swivel Coupling DK 48/48, galv. 394
001019 Work Platform Top 250x200 444 017020 Standard Coupling NK 48/48, galv. 34
001020 Work Platform Basic-T 250x250 444 017030 Standard Coupling NK 60/48, galv. 322
001021 Work Platform Basic-P 250x250 444 017040 Screw-On Coupling AK 48, galv. 158
001022 Work Platform Plus 250x250 444 017070 Swivel Coupling DK 33.7/38, galv. 329
001023 Work Platform Top 250x250 444 018010 Frame R 150, painted 318
001024 Work Platform Basic-T 300x200 444 018020 Frame R 110, painted 318
001025 Work Platform Basic-P 300x200 444 018030 Spindle PD 8 l =1160/800, galv. 319
001026 Work Platform Plus 300x200 444 018040 Head Plate PD 8 318
001027 Work Platform Top 300x200 444 018050 Pin Ø 16x 65/86, galv. 135
001028 Work Platform Basic-T 300x250 444 018060 Cotter Pin 4/1, galv. 183
001029 Work Platform Basic-P 300x250 444 018070 Baseplate PD 8 319
001030 Work Platform Plus 300x250 444 018090 Angle with Nut, galv. 325
001031 Work Platform Top 300x250 444 018110 Foot Tube FR 80, galv. 320
001032 Work Platform Basic-T 300x300 444 018120 Spindle PD 8 l = 750/400, galv. 319
001033 Work Platform Basic-P 300x300 444 018140 Frame Connector with Washer, galv. 318
001034 Work Platform Plus 300x300 444 018150 Diagonal Brace DK 125, galv. 321
001035 Work Platform Top 300x300 444 018160 Diagonal Brace DK 150, galv. 321
001036 Stair Tower Basic-T 250x150 443 018170 Diagonal Brace DK 200, galv. 321
001037 Stair Tower Basic-P 250x150 443 018180 Diagonal Brace DK 250, galv. 321
001038 Stair Tower Plus 250x150 443 018190 Diagonal Brace DK 300, galv. 321
001039 Stair Tower Top 250x150 443 018200 Diagonal Brace DK 350, galv. 321
001040 Stair Tower Basic-T 300x150 443 018230 Diagonal Brace DK 310, galv. 321
001041 Stair Tower Basic-P 300x150 443 018260 Castor PD 8 320
001042 Stair Tower Plus 300x150 443 018270 Quick Jack Nut PD 8, galv. 319
001043 Stair Tower Top 300x150 443 018280 Double Head Nail l=65mm 20
001044 Stair Tower Anchoring 443 018290 Framing Clip, galv. 323
010030 Steel Waler SRZ U100, l=1.20m 10 018300 Cross Strap, galv. 323
010050 Steel Waler SRZ U100, l=2.45m 10 018310 Beam Connector, galv. 323
010060 Steel Waler SRZ U100, l=1.825m 10 018340 Quick Release Spindle, galv. 320
010070 Steel Waler SRZ U100, l=1.95m 10 018350 Hex. Bolt ISO 4016 M16x160-4.6, with Nut 323
010080 Steel Waler SRZ U100, Spec. Length 11 018510 Frame R 150, galv. 318
010090 Steel Waler SRZ U140, Spec. Length 11 018520 Frame R 110, galv. 318
010120 Steel Waler SRZ U100, l=2.95m 10 018600 Yoke Plate, galv. 322
010150 Steel Waler SRZ U120, Spec. Length 11 018610 Yoke Clamp 24, painted 323
010180 Cross Waler KRZ U100, Spec. Length 11 018630 Cross Head Spindle PD8 20/24, galv. 319
010190 Cross Waler KRZ U140, Spec. Length 11 019040 Handrail Post PD 8 321
010200 Internal Corner Waler IRZ 75/75 11 019070 Crane Lifting Unit, Lower Part - PD 8 322
010270 Cross Waler KRZ U120, Spec. Length 11 019130 C-Hook 15kN, galv. 309
010350 Additional Row of SRZ Slots 11 019150 Diagonal Brace DK 125/110, galv. 321
010400 Welding Unit for KRZ 11 019160 Diagonal Brace DK 150/110, galv. 321
010420 VARIO Steel Waler VSRZ-24 U100 l=2.45/12 10 019170 Diagonal Brace DK 200/110, galv. 321
010440 VARIO Steel Waler VSRZ-24 U100 l=1.20/12 10 019180 Diagonal Brace DK 250/110, galv. 321
010490 Welding Unit for VSRZ/12 10 019190 Diagonal Brace DK 300/110, galv. 321
010500 Welding Unit for VSRZ 10 019200 Table Roller with Winch 324
010600 Steel Waler SRZ U100, l=0.95m 10 019210 Diagonal Brace DK 186, galv. 321
010610 Steel Waler SRZ U100, l=1.45m 10 019220 Diagonal Brace DK 310/110, galv. 321
012040 Column Waler SSRZ U120 Spec. Length 214 019240 Transportation Wheel 80 324
012050 Column Vario Waler SVRZ 120 214 019270 Diagonal Strut 310, galv. 328

472
Item no. Specification Page Item no. Specification Page

019280 Diagonal Strut 200, galv. 328 021640 Waler Bolt for RUNDFLEX, galv. 47
019300 Horizontal Strut HS 150, galv. 328 021650 Edge Girder Strap, galv. 46
019330 Horizontal Strut HS 292, galv. 328 021660 Strap 24 for RUNDFLEX, galv. 46
019380 Landing Handrail, galv. 329 021680 Edge Profile 120, right 45
019410 Stair Handrail, galv. 329 021700 Edge Profile 120, left 45
019420 Landing PD 8, galv. 329 021710 Edge Profile 60, right 45
019430 Flight of Stairs PD 8, galv. 329 021720 Edge Profile 60, left 45
019460 Angle for Stair Tower PD 8, galv. 328 021730 Edge Profile 240, right 45
019480 Exit Post, galv. 328 021740 Edge Profile 240, left 45
019540 Stair Tower Stabilizer 140, galv. 327 021750 Edge Profile 360, right 45
019550 Stair Tower Stabilizer Special Leng 327 021760 Edge Profile 360, left 45
019560 Ring Screw M 16, galv. 327 021790 Ratchet Spanner SW 24 "Combi" 49
019570 Connection for Stair Tower Stabilizer, galv. 327 021800 Outside Panel O 250x 60 42
019620 Safety Strap for PD8, galv. 320 021810 Inside Panel I 240x 60 42
019630 Support Ledger PD 8, galv. 325 021820 Outside Panel O 250x120 42
019640 Load Tower Brace LS 186, galv. 325 021830 Inside Panel I 240x120 42
019650 Load Tower Brace LS 165, galv. 325 021840 Outside Panel O 250x240 42
019660 Cap Piece, galv. 325 021850 Inside Panel I 240x240 42
019780 Base Spindle TR 38-70/50, galv 333 021880 Outside Panel O 250x360 42
019790 Adj. Crosshead Spindle TR 38 -70/50, galv. 333 021890 Inside Panel I 240x360 42
019800 Spindle Safety Strap ST 100, galv. 335 021900 Outside Panel O 128x 60 43
019810 Connector ST 100, galv. 334 021910 Inside Panel I 123x 60 43
019900 Base-Head Frame ST 100, galv. 332 021920 Outside Panel O 128x120 43
019910 Stacking Frame ST 100, galv. 332 021930 Inside Panel I 123x120 43
019920 End Waler ST 100, galv. 334 021940 Outside Panel O 128x240 43
019930 End Frame ST 100, galv. 334 021950 Inside Panel I 123x240 43
019940 Diagonal Strut ST 100, galv. 332 021960 Outside Panel O 128x360 43
019950 Crosshead Spindle TR 38-70/50, galv. 333 021970 Inside Panel I 123x360 43
020310 Platform Beam BR U140 174 021980 Crane Eye 24, left 19
020320 Platform Beam BR U100 174 021990 Crane Eye 24, right 19
020330 Folding Bearing Plate 25 175 022001 Waler Hinge, galv. 242
020510 Platform Beam BR U120 174 022002 Waler Hinge adjustable, galv. 242
020520 Platform Beam BR U160 174 022003 Lowering Device HDA 252
020600 Gravity Pivot Plate BR 174 022004 Prop Section HDS 270 250
020610 Crane Eye BR 0,4t 175 022005 Prop Section HDS 90 250
020620 Spacer for Platform Beam BR 175 022006 Prop Section HDS 30 250
020820 Outside Panel O 85x120 44 022007 Head Spindle HDK 45 252
020830 Inside Panel I 72x120 44 022008 Main Beam HDT 880 251
020840 Outside Panel O 85x240 44 022009 Main Beam HDT 440 251
020850 Inside Panel I 72x240 44 022010 Main Beam HDT 280 251
020860 Outside Panel O 85x300 44 022011 Double Tie Yoke HDD 251
020870 Inside Panel I 72x300 44 022013 Centering Bolt HD M12, galv. 253
020880 Outside Panel O 85x360 44 022014 Main Beam Clamp HD 40mm, galv. 254
020890 Inside Panel I 72x360 44 022016 Brace Connector HDR 255
021110 Articulated Waler GRV 90 40 022017 Scaffold Bracket HD 75 256
021120 Articulated Waler GRV 75 40 022018 Shear Pin HDA 252
021130 Articulated Waler GRV 60 40 022019 Base Adapter HD 253
021140 Articulated Waler GRV 30 40 022020 Coupling Section HD 30 250
021150 Articulated Spindle Waler GSRV 65-90 40 022021 Trolley HD 254
021160 Hook Spanner HKS for GRV 40 022022 Compression Prop Head HD 255
021240 Adjustable Bolt STS 260, galv. 41 022023 Compression Prop Spindle HD 255
021250 Adjustable Bolt STS 360, galv. 41 022024 Base Plate HD 255
021260 Half Round Washer HRS, galv. 41 022025 Centering Bar 40x20x400mm 251
021270 Bearing Block GRV, left 41 022026 Steel Beam Clamp IPB 300-1000 254
021280 Bearing Block GRV, right 41 022027 Wing Nut Spanner HD 252
021290 Spindle Connector GRV 41 022030 Tie Rod Cylinder Yoke SW, galv. 242
021400 Outside Panel O 250x300 42 022040 Heavy Duty Roller 150kN / Type B-II 247
021410 Inside Panel I 240x300 42 022041 Heavy Duty Roller 200kN / Type A-II 247
021420 Outside Panel O 128x300 43 022042 Heavy Duty Roller 300kN / Type B-III 247
021430 Inside Panel I 123x300 43 022043 Heavy Duty Roller 300kN / Type N-III 247
021440 Edge Profile 300, right 45 022044 Heavy Duty Roller 400kN / Type A-III 247
021450 Edge Profile 300, left 45 022210 Pin for GRV, galv. 41
021580 T-Waler 800 46 022230 Cotter Pin 5/1, galv. 41
021600 T-Waler 46 022250 Hex. Nut ISO 4032 M24-8, galv. 41
021610 Adjustable Spindle 210, galv. 47 022310 Culvert Frame Waler RKR U100 26
021620 Adjustable Spindle 500, galv. 47 022320 Culvert Frame Waler RKR U120 26
021630 Distribution Waler 47 022330 Culvert Frame Waler RKR U140 26

473
Item no. Specification Page Item no. Specification Page

022340 Culvert Frame Waler RKR U160 26 023170 Filler Plate LA 270x36 62
022350 Culvert Frame Waler RKR U180 26 023181 Wall Thickness Compensation WDAS 270x 5 83
022380 Double Spindle RKR with Wheel 28 023182 Wall Thickness Compensation WDA 270x 5 63
022400 Adjustable Spindle RKR 28 023191 Wall Thickness Compensation WDAS 270x 6 83
022410 Corner Spindle RKR 28 023192 Wall Thickness Compensation WDA 270x 6 63
022440 Double Spindle RKR 28 023200 Articulated Corner TGE 270 59
022460 Welding Unit for RKR 26 023201 Articulated Corner TSGE 270 82
022510 Panel TR 270x120 54 023270 Filler Plate LA 120x36 62
022511 Panel TRIO Structure TS 270x120 82 023281 Wall Thickness Compensation WDAS 120x 5 83
022514 Panel TR 120x240 56 023282 Wall Thickness Compensation WDA 120x 5 63
022520 Panel TR 270x 90 55 023291 Wall Thickness Compensation WDAS 120x 6 83
022521 Panel TRIO Structure TS 270x 90 82 023292 Wall Thickness Compensation WDA 120x 6 63
022530 Panel TR 270x 72 55 023300 Articulated Corner TGE 120 59
022531 Panel TRIO Structure TS 270x 72 82 023301 Articulated Corner TSGE 120 82
022540 Multipurpose Panel TRM 270x72 55 023390 Stacking Device TRIO, galv. 65
022541 Multipurpose Panel TRIO Structure TSM 270x72 82 023440 Lifting Pin TRIO 65
022550 Panel TR 270x 60 55 023450 Filler Support TPA 120 63
022551 Panel TRIO Structure TS 270x 60 82 023460 Filler Support TPA 270 63
022560 Panel TR 270x 30 54 023500 Alignment Coupler BFD, galv. 48
022561 Panel TRIO Structure TS 270x 30 82 023550 Compensation Waler TAR 85 64
022570 Panel TR 270x240 54 023551 Waler 85 99
022571 Panel TRIO Structure TS 270x240 82 023560 Projection Waler TVR 45/45 64
022580 Inside Corner TE 270 59 023590 Scaffold Bracket TRG 100/112 71
022581 Corner TRIO Structure TSE 270 82 023630 Top Tie Bracket-2 AH, galv. 68
022600 Panel TR 120x120 56 023640 Bulkhead Tie TS, galv. 65
022601 Panel TRIO Structure TS 120x120 82 023650 Hook Tie DW 15/400, galv. 65
022610 Panel TR 120x 90 56 023660 Brace Connector TRIO , galv. 67
022611 Panel TRIO Structure TS 120x 90 82 023670 Scaffold Bracket TRG 80 70
022620 Panel TR 120x 72 57 023680 Scaffold Bracket TRG 120 70
022621 Panel TRIO Structure TS 120x 72 82 023690 Lifting Hook 1,5t 66
022630 Multipurpose Panel TRM 120x72 57 023800 Foundation Strap TRIO 68
022631 Multipurpose Panel TRIO Structure TSM 120x72 82 023820 Hook Tie Head DW 15, galv. 65
022640 Panel TR 120x 60 57 023850 Panel Alu TRA 270x 90 76
022641 Panel TRIO Structure TS 120x 60 82 023860 Multipurpose Panel Alu TAM 270x72 76
022650 Panel TR 120x 30 57 023870 Panel Alu TRA 270x 60 76
022651 Panel TRIO Structure TS 120x 30 82 023880 Panel Alu TRA 270x 30 76
022660 Inside Corner TE 120 59 023891 Corner Alu TAE 270 76
022661 Corner TRIO Structure TSE 120 82 023900 Panel Alu TRA 90x120 77
022790 Panel TR 60x 90 58 023920 Universal Waler 245 67
022800 Panel TR 60x 72 58 023930 Waler Stop 67
022810 Panel TR 60x 60 58 023940 Alignment Coupler 38, galv. 48
022820 Panel TR 60x 30 58 023950 Panel Alu TRA 90x 60 77
022840 Inside Corner TE 60 58 023960 Panel Alu TRA 90x 30 77
022950 Concreting Platform TRIO 120x270 70 023971 Corner Alu TAE 90 77
023010 Foundation Tie Clamp TRIO TLS 68 023980 Multipurpose Panel Alu TAM 90x72 77
023020 Perforated Foundation Tie 68 023990 Wall Thickness Compens. WDA 120x10, Alu 63
023030 Stopend Panel TR 120x24 62 023995 Wall Thickness Compens. WDA 270x10, Alu 63
023040 Stopend Panel TR 270x24 62 024000 Compensation Washer 16, galv. 243
023050 Stopend Panel TR 330x24 81 024010 Double Girder Strap DTB, galv. 322
023060 Stopend Panel TRIO AT 270x3 61 024060 Girder Strap TB, galv. 322
023061 Stopend Panel TRIO MT 270x20 61 024070 Hook Strap HB 24-100/120, galv. 15
023062 Stopend Panel TRIO MT 270x24/25 61 024080 Hook Strap HB 24-140/160, galv. 15
023064 Stopend Panel TRIO MT 270x30 61 024090 Hex. Nut DIN 934 M 8, galv. 401
023065 Stopend Panel TRIO MT 270x35/36 61 024140 F.H. Bolt DIN 603 M 8x 70 w.N, galv. 15
023067 Stopend Panel TRIO AT 120x3 61 024170 Double Hook Strap for GT 24, galv. 15
023068 Stopend Panel TRIO MT 120x20 61 024180 Compensation Washer 20, galv. 243
023069 Stopend Panel TRIO MT 120x24/25 61 024210 Tie Yoke SKZ 17
023071 Stopend Panel TRIO MT 120x30 61 024220 Coupling Compression Plate KDP 17
023072 Stopend Panel TRIO MT 120x35/36 61 024240 Wedge KZ, galv. 17
023074 Stopend Panel TRIO MTF 270x20 61 024250 Wedge K, galv. 17
023075 Stopend Panel TRIO MTF 270x24/25 61 024260 Coach Screw DIN 571 8x 80, galv. 20
023076 Stopend Panel TRIO MTF 270x35/36 61 024270 Coach Screw DIN 571 8x 60, galv. 20
023077 Stopend Panel TRIO MTF 270x30 61 024280 F.H. Bolt DIN 603 M 6x100 w.N, galv. 158
023078 Stopend Panel TRIO MTF 120x30 61 024310 Screwnail 70 mm, galv. 403
023079 Stopend Panel TRIO MTF 120x35/36 61 024350 Screwnail 90 mm, galv. 403
023080 Stopend Panel TRIO MTF 120x24/25 61 024360 F.H. Bolt DIN 603 M 8x125 w.N, galv. 158
023081 Stopend Panel TRIO MTF 120x20 61 024380 F.H. Bolt DIN 603 M 8x160 w.N, galv. 401

474
Item no. Specification Page Item no. Specification Page

024390 F.H. Bolt DIN 603 M 8x200 w.N, galv. 401 026414 Scaffold Tube, Steel 48.3x3.2, galv. l=4.0m 335
024410 F.H. Bolt DIN 603 M 8x250 w.N, galv. 401 026415 Scaffold Tube, Steel 48.3x3.2, galv. per m 158
024470 TSS-Torx 6x60, galv. 20 026416 Scaffold Tube, Alu 48.3x4.0, per m 394
024480 Extension Splice 24-2 19 026417 Scaffold Tube Cost per Cut 158
024520 Coach Screw DIN 571 8x160, galv. 158 026418 Scaffold Tube, Steel 48.3x3.2, galv. l=6.0m 335
024540 TSS-Torx 6x40, galv. 158 026419 Scaffold Tube, Steel 48.3x3.2, galv. l=5.0m 335
024550 Spax Screw TX 30 8x 20 403 026420 Anchor Positioning Stud M 24, galv. 142
024590 Wedge Lowering Device 420 kN 253 026430 Hex. Bolt ISO 4014 M24x 70-10.9 137
024600 Girder Claw HB 16 026440 Anchor Positioning Stud AH-DW 15, 373
024610 Hook Strap HBA 30, galv. 16 026450 Anchor Positioning Stud M 30, galv. 170
024630 Fix Strap U100-120, galv. 16 026460 Anchor Positioning Stud M 36, galv. 170
024640 Quick Str. Hook Strap 24-100/140, galv. 16 026512 Corner Platform ASE 195
024690 TSS-Torx 6x80, galv. 20 026520 Bracket ASG 160 196
024860 Hook Strap HB Clamp 150, galv. 15 026521 Support Extension 370 ASG 199
024880 Hook Strap HB for VT, galv. 395 026522 Compression Strut ASG 199
024890 Hook Strap HB 2 for VT, galv. 395 026523 Compression Strut ASE 195
024900 Hex. Bolt ISO 4014 M20x 80-8.8, galv. 400 026526 Bracket Connector ASG 196
024910 Hex. Bolt ISO 4014 M20x100-8.8, galv 243 026527 Corner Plate ASG 196
024920 Power-Screwdriver DSSE 642 388 026528 Handrail Holder 105 ASG 198
024950 Spax Screw TX 30 6x100, yellow galv. 403 026529 Height Adjusting Internal Corner ASE 197
024960 Spax Screw TX 30 6x120, yellow galv. 403 026530 Safety Net 6.0x2.0m/100mm mesh 184
024970 Spax Screw TX 30 6x140, yellow galv. 403 026531 Wall Scaffold Hinge ASG 201
024980 Spax Screw TX 30 6x160, yellow galv. 403 026532 Mounting Extension ASG 197
024990 Spax Screw TX 30 6x180, yellow galv. 403 026533 Transportation Fork ASG 160, galv. 200
025200 Quick Release Corner SSE 1.0m 20 026535 Heigth Adjusting ASG 197
025210 Quick Release Corner SSE 2.0m 20 026536 Mounting Plate ASG 201
025220 Quick Release Corner SSE 3.0m 20 026580 Main Platform ASG 160/240, Mesh 192
025230 Quick Release Corner SSE 4.0m 20 026581 Intermediate Platform ASZ 240, Mesh 193
025240 Quick Release Corner SSE 5.0m 20 026582 Rear Handrail Section ASE 195
025250 Quick Release Corner SSE Spec. Length 20 026583 Handrail Extension ASG 192
025660 Hardware Box 80x120, galv. 413 026622 Intermediate Platform FBZ 240 179
025670 Hardware Box 80x120, painted 413 026623 Support Extension 200 FB-2 180
025690 Brace Frame SB-A0 354 026624 Support Extension 300 FB-2 180
025700 Brace Frame SB-A 355 026625 Finishing Platform FBN-2/300 179
025710 Brace Frame SB-B 355 026626 Corner Frame FBE 183
025720 Brace Frame SB-C 354 026627 Compression Strut FB-2 180
025730 Spindle TR 60x9/43 356 026628 Handrail Post FBP 184
025740 Connector SB-A,B,C - TRIO/DOMINO 69 026629 Horizontal Strut 181
025750 Guide Roller SB-A,B 356 026631 Finishing Platform Bracket FBN-2 182
025760 Waler Connector SB-A,B,C 356 026632 Mounting Head FB 186
026030 Bracket KG 180 132 026635 Handrail Extension FB 184
026035 Climbing Bracket KG 180 132 026636 Anchor Loop 189
026040 Cantilever Beam KG 180 133 026637 Handrail FB-300 181
026050 Bracket KG 240 131 026638 Mounting Extension ASG for Anchor Loop 189
026055 Climbing Bracket KG 240 130 026639 Plywood Board FB 300 169x298 181
026060 Cantilever Beam KG 240 131 026640 Plywood Board FBZ 240 168x236 181
026075 Post Extension 150 KG 180 133 026641 Plywood Board FBN-2 81x298 181
026085 Post Extension 150 KG 240 131 026644 Pipe Bracing Connector, galv. 182
026100 Anchor Chain ZAH 137 026645 Loop Mounting Head-2 FB 189
026110 Wall Scaffold Hinge WGS 136 026646 Transportation Fork FB, galv. 185
026120 Handrail Post 125 for KG 133 026647 Screw Plate DW 15/115, galv. 73
026140 Post Extension KG 180 Spec. Length 133 026648 Folding Platform FB 180-3/300 178
026150 Lifting Eye KG 1,0t 132 026649 Folding Corner Platform FEB 180-3/300 178
026160 Connector ZAH-KG 137 026651 Bracket Strut FB 180-3 180
026170 Post Extension KG 240 Spec. Length 131 026652 Folding Bracket FB 180-3 182
026180 Bracket KG 130 136 026990 Wall Scaffold Hinge FB 186
026200 Pin Ø 25x160 for KG, galv. 135 027010 Carriage FW 130
026220 Hex. Bolt ISO 4014 M24x 80-10.9 400 027030 Articulated Joint GT 24 134
026230 Anchor Sleeve M24 141 027040 Articulated Joint TRIO 134
026240 Cone for Anchor Sleeve M24 141 027060 Corner Scaffold Bracket EGB 80, right 21
026250 Plug Ø 26mm for Anchor Sleeve M24 141 027070 Corner Scaffold Bracket EGB 80, left 21
026280 Anchor Sleeve DW 15 373 027100 Ratchet Lever SW 17 130
026290 Hex. Bolt ISO 4017 M24x 50-10.9 400 027110 Scaffold Jack GB 80 21
026400 Anchor Sleeve M24, Stainless Steel 277 027150 Locating Shoe for Articulated Joint 135
026411 Scaffold Tube, Steel 48.3x3.2, galv. l=1.0m 335 027160 Counterplate for Locating Shoe 135
026412 Scaffold Tube, Steel 48.3x3.2, galv. l=2.0m 34 027170 Pin Ø 16x 42, galv. 135
026413 Scaffold Tube, Steel 48.3x3.2, galv. l=3.0m 34 027180 Ratchet Lever SW 19 146

475
Item no. Specification Page Item no. Specification Page

027190 Insert Socket SW 17 389 028590 Tension Strap 16-25, galv. 297
027200 Insert Socket SW 19 389 028660 Clawhead 16/20 S, galv. 295
027210 Spanner SW 80, for SB 365 028670 Clawhead 16/20, galv. 295
027211 Spanner SW 46, for SB 365 028680 Crosshead 20/24 S, galv. 294
027212 Allan Key SW 14, long 157 028690 Crosshead 16 S, galv. 295
027213 Spanner SW 70, for SB 365 028700 Crosshead 16, galv. 295
027230 Tension Rod 135/M 30 with Nut 363 028710 Table Striking Trolley 2t, l=200 305
027288 MULTIPROP MP 120 335 028715 Table Striking Trolley 2t, l=170 305
027289 MULTIPROP MP 250 338 028720 Attachment 100 for Striking Trolley 305
027290 MULTIPROP MP 350 338 028730 Prop PEP 20 N 260 346
027291 MULTIPROP MP 480 338 028740 Prop PEP 20 N 300 346
027296 Tilting Base MKF 340 028750 Prop PEP 20 N 350 346
027297 Tilting Forkhead MKK 340 028760 Prop PEP 20 G 410 346
027298 Scaffold Tube Coupler MG-A/C 341 028770 Prop PEP 30 G 300 346
027299 Scaffold Tube Coupler MG-B/D 341 028780 Prop PEP 30 G 350 346
027301 Connector MPV-2 340 028870 Lowering Head 20/24, galv. 296
027302 MULTIPROP Strap SRZ U100 - U140 341 028880 Clawhead 24 L, galv. 294
027304 Connection Bolt MP, with Nut 340 028890 Clawhead 24 S, galv. 294
027305 MULTIPROP MP 625 338 028900 Base Plate for RS 1000/1400, galv. 350
027310 Base MP 50 338 028990 Push-Pull Prop RS 1000, galv. 350
027340 Hex. Bolt ISO 4016 M12x180-4.6, with Nut 401 029130 DAM Scaffold Bracket SKS 180 162
027480 Anchor Plate SB-DW 26 363 029140 DAM Scaffold Bracket SKSF 240 162
027500 Brace Frame SB 1 357 029150 V-Strongback 12-2 163
027510 Brace Frame SB 2 357 029160 V-Strongback 12-3 163
027520 Double Anchor Tie Yoke DSW 360 029170 V-Strongback 14-3 163
027530 Anchor Waler U140, l=2.35m 363 029180 V-Strongback 14-4 163
027540 Tension Rod 100/M 30 with Nut 363 029200 Compression Brace 2 SKS, 1.35-1.95m 163
027590 Hook Strap for SB, galv. 18 029210 Compression Brace 3 SKS, 1.75-2.35m 163
027650 Anchor Waler U140, l=0.55m 363 029220 Compression Brace 4 SKS, 2.55-3.15m 163
027680 Adapter SB-1,2 - TRIO/DOMINO 69 029240 Adjustable Joint SKS 167
027690 Pin Ø 19x165, galv. SB-TRIO 69 029270 Advancing Screw M 24, galv. 142
027790 Brace Clamp HL, galv. 298 029280 Anchor Positioning Plate 15, galv. 142
027860 Tripod, galv. 298 029290 Tension Anchor SKS 26 167
027890 Crosshead 20/24, galv. 294 029300 Tension Anchor SKS 20 167
027930 Assembly Bar 24, galv. 296 029310 Scaffold Jack SKS 90 165
027940 Brace Clamp, galv. 298 029320 H-Kicker SKS 166
027990 Pin Ø 14x107, galv. 297 029380 Anchor Positioning Plate 20, galv. 170
028000 Universal Tripod, galv. 298 029390 Anchor Positioning Plate 26, galv. 170
028010 Push-Pull Prop RSS I 100 029420 Hex. Bolt ISO 4017 M30x 70-8.8, galv. 168
028020 Push-Pull Prop RSS II 35 029430 Hex. Bolt ISO 4017 M36x 70-8.8, galv. 169
028030 Push-Pull Prop RSS III 349 029440 Coach Screw DIN 571 6x 20, galv. 142
028050 Girder Headpiece GT 24, galv. 18 029450 Advancing Screw M 30, galv. 170
028060 Wedge Headpiece SRZ/SRU 18 029460 Advancing Screw M 36, galv. 170
028070 Girder Headpiece GT 24/A, galv. 18 029470 Scaffold Mounting Ring 15, galv. 157
028080 Connector Kicker/Push-Pull Prop, galv. 253 029480 Scaffold Mounting Ring 2-20, galv. 168
028100 Base Plate for RS 286 029490 Scaffold Mounting Ring 2-26, galv. 169
028110 Kicker AV 348 029540 Hex. Bolt ISO 4014 M30x130-10.9 168
028120 Kicker AV for RSS III 349 029550 Hex. Bolt ISO 4014 M36x130-10.9 169
028210 Push-Pull Prop RS I 349 029560 Hex. Bolt ISO 4014 M24x120-10.9 157
028220 Push-Pull Prop RS II 349 029610 Ratchet Wrench 1" 170
028330 Frame MRK 90 339 029620 Socket SW 19-1/2" 170
028340 Frame MRK 120 339 029630 Socket SW 46-1" 170
028350 Frame MRK 150 339 029640 Socket SW 55-1" 389
028360 Frame MRK 225 339 029650 Socket SW 27-1/2" 384
028370 Frame MRK 296 339 030005 Tie Rod DW 15 l=0.50m 370
028380 Frame MRK 137.5 339 030010 Tie Rod DW 15 l=0.85m 215
028390 Frame MRK 62.5 339 030020 Tie Rod DW 15 l=1.70m 370
028400 Frame MRK 75 339 030030 Tie Rod DW 15 Spec. Length 140
028460 Frame MRK 201.5 339 030050 Cutting Cost Tie Rod DW 15 / B 15 140
028470 Frame MRK 230 339 030060 Brace Frame Double Anchor DW 15 372
028480 Frame MRK 237 339 030070 Hex. Nut DW 15 SW 30/ 50, galv. 371
028490 Frame MRK 266 339 030090 Hex. Nut DW 15 SW 30/108, galv. 371
028500 UNIPORTAL Head, galv. 302 030100 Wingnut DW 15, galv. 215
028550 Tension Strap GT24, 22-31, galv. 302 030110 Wingnut Counterplate DW 15, galv. 370
028560 Crane Lifting Unit, Lower Part - UNIPORTAL 307 030130 Cam Nut DW 15, galv. 123
028570 Crane Lifting Unit, Upper Part 307 030140 Counterplate DW 15, 120x120x15 370
028580 Yoke Waler UNIPORTAL 302 030150 Tie Rod B 15 l=0.30m 370

476
Item no. Specification Page Item no. Specification Page

030160 Tie Rod DW 15 l=6.00m 370 031390 Cone FZR 22 374

030170 Tie Rod DW 15 l=1.50m 370 031420 Release Agent PERI CLean 20 L 396
030180 Tie Rod DW 15 l=2.00m 370 031435 Release Agent PERI CLean 208 L 396
030190 Triangular Wingnut DW 15, galv. 371 031440 Release Agent Bio Clean 20 L 396
030260 Formwork Joint SSP l=2.50m 20 031455 Release Agent Bio Clean 208 L 396
030290 Plug Ø 20mm 112 031480 Socket Wrench SW 36, cromatized 157
030300 Plug Ø 20/24mm 67 031490 Spanner for Tension Rod 20/26, galv 365
030320 Plug Ø 25mm for TRS 221 031520 Pressure Sprayer 396
030340 Tie Rod DW 26 Spec. Length 169 031530 Spray Nozzle (0,1F 110) 396
030370 Wingnut Pivot Plate DW 15 , galv. 101 031550 Repoxal Glue, 1kg 374
030400 Coupling Nut M 30/DW 26, galv. 363 031554 Glue for Concrete Cones, 5kg Set 380
030420 Counterplate DW 26, 120x120x20 377 031555 Glue Component A 380
030440 Spherical Nut DW 15, galv. 209 031556 Glue Component B 380
030460 Pretension Jack for DW 15/20/26 378 031580 V-Tie Holder DW 15 364
030480 Tie Rod DW 15 l=1.00m 370 031590 V-Tie Holder DW 20 364
030490 Tie Rod DW 15 l=1.20m 370 031600 V-Tie Holder DW 26 364
030500 Cutting Cost Tie Rod DW 26 169 031626 Spacer Tube rough DR 28 l=3.00m 376
030550 Hex. Nut DW 15 SW 30/ 50, weldable 371 031627 Spacer Tube rough DR 32 l=3.00m 364
030580 Hex. Nut DW 20 SW 36/ 60, weldable 361 031631 Leading Anchor Coupler DW 15 364
030590 Hex. Nut DW 20 SW 36/110, weldable 361 031632 Leading Anchor Coupler DW 20 364
030640 Tie Rod DW 20, l=0.50m 361 031633 Leading Anchor Coupler DW 26 364
030641 Tie Rod DW 20, l=1.00m 361 031634 Spacer Tube rough DR 42 l=3.00m 364
030645 Tie Rod DW 26, l=0.50m 362 031635 DK Cone DW 15/35 379
030646 Tie Rod DW 26, l=1.00m 362 031636 DK Cone DW 15/55 379
030663 Adapter I for Pretension Jack 378 031637 DK Cone DW 20/55 380
030664 Adapter III for Pretension Jack 378 031638 DK Cone DW 26/55 380
030680 Tie Rod DW 20, l=6.00m 375 031639 SK Sealing Washer UNI DW 15 379
030690 Tie Rod DW 26, l=6.00m 377 031641 DK Concrete Cone Architc. DW 15, 58/52 379
030700 Tie Rod DW 20 Spec. Length 168 031642 DK Concrete Cone DW 15 58/30 379
030710 Tie Rod DW 15 l=2.50m 370 031643 DK Concrete Cone UNI DW 15 58/52 379
030720 Tie Rod DW 15 l=3.00m 370 031644 DK Tongs for Concrete Cone 58 384
030730 Tie Rod DW 15 l=3.50m 370 031645 SK Anchor Cone DW 15 381
030740 Tie Rod B 15 Spec. Length 370 031646 SK Anchor Cone DW 20 381
030745 Tie Rod B 20 Spec. Length 375 031647 SK Anchor Cone DW 26 381
030790 Clamp Lock 393 031648 SK Sealing Washer DW 20 381
030800 Cutting Cost Tie Rod DW 20 / B 20 168 031649 SK Sealing Washer DW 26 381
030820 Spanner for Clamp Lock, galv. 393 031650 SK Concrete Cone DW 20, 67/60 382
030830 Counterplate DW 20, 120x120x20 361 031651 SK Concrete Cone DW 26, 100/60 382
030840 Threaded Plate DW 15 140 031652 KK Concrete Cone M24-67/52 140
030860 Threaded Anchor Plate DW 20 141 031653 KK Concrete Cone M30-80/52 383
030870 Threaded Anchor Plate DW 26 169 031654 KK Concrete Cone M36-90/52 383
030920 Climbing Cone-2 M 30/DW 20, galv. 168 031655 DK Cone Remover UNI 384
030930 Anchor Cone 2 DW 20/DW 20, galv. 375 031656 SK Tongs for Concrete Cone 67 384
030940 Climbing Cone-2 M 36/DW 26, galv. 169 031657 SK Tongs for Concrete Cone 100 384
030950 Anchor Cone 2 DW 26/DW 26, galv. 377 031658 KK Concrete Cone M24-67/52 BOL 141
030960 Screw-On Cone M 24/DW 20, galv. 141 031671 SK Tube Seal 22 382
030970 Hex. Coupler DW 26 SW 46/ 80, weldable 362 031672 SK Tube Seal 28 382
030980 Hex. Coupler DW 26 SW 46/150, weldable 362 031673 PERIDRAIN Fabric 2.80x25.00m 398
030990 Wingnut DW 20, galv. 361 031674 PERIDRAIN Fabric 1.50x25.00m 398
031000 Plywood Repair Ø 60mm 391 031675 PERI Hotknife 398
031001 Plywood Repair Ø 40mm 391 031677 SK Tube Seal 42 382
031030 Drill Bit Ø 35mm 390 034010 Panel HS 150x 90 118
031040 Drill Bit Ø 20mm 390 034020 Panel HS 90x120 119
031050 Tie Rod Wrench 20, galv. 376 034030 Panel HS 90x 60 119
031070 Tie Rod Wrench 15, galv. 372 034040 Panel HS 90x 30 119
031080 Drill Bit Ø 25mm 390 034050 Panel HS 150x 60 118
031090 Form Lining Drill Bit Ø20x1000 390 034060 Panel HS 150x 30 118
031100 Drill Bit Ø 40mm 390 034070 Panel HS 120x 60 118
031120 Drill Bit Ø 50mm 390 034080 Panel HS 120x 30 118
031140 Rock Anchor DW 15 360 034100 Multi Panel HSM 150x45 119
031150 Waterstop Centrepiece DW 15 371 034110 Multi Panel HSM 120x45 119
031200 Chamfer Strip with Flange l=2.50m 20 034120 Multi Panel HSM 90x45 119
031220 Climbing Cone-2 M 24/DW 15, galv. 140 034130 Filler Panel HSAP 150x15 121
031260 Concrete Spacer Tube FZR 22 l=0.90m 374 034140 Filler Panel HSAP 90x15 121
031300 Weld on Anchor DW 15 373 034150 Inside Corner HSE 150 120
031320 Cutting Cost Tube FZR 22 374 034160 Inside Corner HSE 90 120
031360 Plug FZR 22mm 374 034170 Filler Plate HSLA 150 122

477
Item no. Specification Page Item no. Specification Page

034180 Filler Plate HSLA 90 122 045010 Circular Column Panel Ø 25cm h=0.3m 234
034200 Articulated Corner HSG 150 120 045011 Circular Column Panel Ø 25cm h=1.2m 234
034210 Articulated Corner HSG 90 120 045012 Circular Column Panel Ø 25cm h=2.4m 234
034220 Inside Corner HSE 120 120 045013 Circular Column Panel Ø 25cm h=3.0m 234
034230 Articulated Corner HSG 120 120 045020 Circular Column Panel Ø 30cm h=0.3m 234
034240 Outside Corner Angle HSW 120 120 045021 Circular Column Panel Ø 30cm h=1.2m 234
034250 Outside Corner Angle HSW 150 120 045022 Circular Column Panel Ø 30cm h=2.4m 234
034260 Outside Corner Angle HSW 90 120 045023 Circular Column Panel Ø 30cm h=3.0m 234
034280 Filler Panel HSAP 120x15 121 045030 Circular Column Panel Ø 35cm h=0.3m 234
034290 Filler Plate HSLA 120 122 045031 Circular Column Panel Ø 35cm h=1.2m 234
034320 Filler Bar HSAS 150x5 121 045032 Circular Column Panel Ø 35cm h=2.4m 234
034330 Filler Bar HSAS 90x5 121 045033 Circular Column Panel Ø 35cm h=3.0m 234
034350 Striking Fillet HSL 150 122 045040 Circular Column Panel Ø 40cm h=0.3m 234
034360 Striking Fillet HSL 90 122 045041 Circular Column Panel Ø 40cm h=1.2m 234
034370 Filler Bar HSAS 120x5 121 045042 Circular Column Panel Ø 40cm h=2.4m 234
034380 Striking Fillet HSL 120 122 045043 Circular Column Panel Ø 40cm h=3.0m 234
034390 Filler Support HSP 120 121 045050 Circular Column Panel Ø 45cm h=0.3m 234
034400 Filler Support HSP 150 121 045051 Circular Column Panel Ø 45cm h=1.2m 234
034410 Filler Support HSP 90 121 045052 Circular Column Panel Ø 45cm h=2.4m 234
034460 Filler Bar HSAS 90x6 121 045053 Circular Column Panel Ø 45cm h=3.0m 234
034470 Filler Bar HSAS 120x6 121 045060 Circular Column Panel Ø 50cm h=0.3m 234
034480 Filler Bar HSAS 150x6 121 045061 Circular Column Panel Ø 50cm h=1.2m 234
034500 Clip HSC, galv. 123 045062 Circular Column Panel Ø 50cm h=2.4m 234
034510 Compensation Waler HSR 59 122 045063 Circular Column Panel Ø 50cm h=3.0m 234
034520 Crane Hook HSKA 123 045070 Circular Column Panel Ø 55cm h=0.3m 234
034530 Locking Strip HSS 60 123 045071 Circular Column Panel Ø 55cm h=1.2m 234
034540 Bulkhead Tie HST, galv. 123 045072 Circular Column Panel Ø 55cm h=2.4m 234
034550 Brace Connector HSRA 125 045073 Circular Column Panel Ø 55cm h=3.0m 234
034560 Scaffold Bracket HSK 80 125 045080 Circular Column Panel Ø 60cm h=0.3m 234
034570 Bracket HSK 60 125 045081 Circular Column Panel Ø 60cm h=1.2m 234
034580 Handrail Post HSGP 24 045082 Circular Column Panel Ø 60cm h=2.4m 234
034610 Top Tie Bracket HSAH, galv. 123 045083 Circular Column Panel Ø 60cm h=3.0m 234
034620 Timber Holder HSKH 22, galv. 124 045090 Circular Column Panel Ø 65cm h=0.3m 234
034640 Timber Strut Coupling HSRB 125 045091 Circular Column Panel Ø 65cm h=1.2m 234
034650 Timber Holder HSKH 14, galv. 124 045092 Circular Column Panel Ø 65cm h=2.4m 234
034660 Quick Connector HSSA 10/12, galv. 124 045093 Circular Column Panel Ø 65cm h=3.0m 234
034670 Quick Connector HSSA 14/16, galv. 124 045100 Circular Column Panel Ø 70cm h=0.3m 234
034680 Foundation Tie Clamp HANDSET HLS 124 045101 Circular Column Panel Ø 70cm h=1.2m 234
034690 Scaffold Tube Holder HSGH 124 045102 Circular Column Panel Ø 70cm h=2.4m 234
035440 Hex. Bolt ISO 4016 M12x 40-4.6, with Nut 401 045103 Circular Column Panel Ø 70cm h=3.0m 234
035500 Stripping Cart, Alu 290 045104 Circular Column Panel Ø 75cm h=0.3m 234
035700 Handrail Holder 133 045105 Circular Column Panel Ø 75cm h=1.2m 234
037150 Tie Yoke DW 15 209 045106 Circular Column Panel Ø 75cm h=2.4m 234
037160 Locking Pin Ø 20x205, galv. 209 045107 Circular Column Panel Ø 75cm h=3.0m 234
037190 Brace Connector -3 RAPID, galv. 208 045108 Circular Column Panel Ø 80cm h=0.3m 234
037210 Chamfer Strip RAPID l=3.0m 208 045109 Circular Column Panel Ø 80cm h=1.2m 234
037250 Column Frame 300, Alu 208 045110 Circular Column Panel Ø 80cm h=2.4m 234
037260 Column Frame 210, Alu 208 045111 Circular Column Panel Ø 80cm h=3.0m 234
037270 Column Frame 60, Alu 208 045112 Circular Column Panel Ø 85cm h=0.3m 234
037320 Crane Lifting Unit -2 RAPID 209 045113 Circular Column Panel Ø 85cm h=1.2m 234
037400 Concreting Platform, complete 211 045114 Circular Column Panel Ø 85cm h=2.4m 234
037410 Concreting Landing 211 045115 Circular Column Panel Ø 85cm h=3.0m 234
037420 Handrail 52, galv. 211 045116 Circular Column Panel Ø 90cm h=0.3m 234
037430 Handrail 134, galv. 211 045117 Circular Column Panel Ø 90cm h=1.2m 234
037440 Crane Hook Concreting Platform 211 045118 Circular Column Panel Ø 90cm h=2.4m 234
037500 Panel QUATTRO QE 275 226 045119 Circular Column Panel Ø 90cm h=3.0m 234
037510 Panel QUATTRO QE 125 226 045120 Circular Column Panel Ø 95cm h=0.3m 234
037520 Panel QUATTRO QE 50 226 045121 Circular Column Panel Ø 95cm h=1.2m 234
037530 Brace Connector QUATTRO QR 227 045122 Circular Column Panel Ø 95cm h=2.4m 234
037540 Corner Tie Unit QUATTRO QA 227 045123 Circular Column Panel Ø 95cm h=3.0m 234
037550 Bottom Slide Bar QUATTRO QB 227 045124 Circular Column Panel Ø 100cm h=0.3m 234
037590 Chamfer Strip QDL 50 392 045125 Circular Column Panel Ø 100cm h=1.2m 234
037600 Chamfer Strip QDL 125 392 045126 Circular Column Panel Ø 100cm h=2.4m 234
037610 Chamfer Strip QDL 275 392 045127 Circular Column Panel Ø 100cm h=3.0m 234
044760 Lifting Gear Combi -2 TRIO 66 045128 Circular Column Panel Ø 105cm h=0.3m 234
044770 Lifting Gear -3 TRIO 66 045129 Circular Column Panel Ø 105cm h=1.2m 234
044890 Rivet Gun BZ 390 045130 Circular Column Panel Ø 105cm h=2.4m 234

478
Item no. Specification Page Item no. Specification Page

045131 Circular Column Panel Ø 105cm h=3.0m 234 052260 Fin-Ply 21mm 1250x2500mm 420
045132 Circular Column Panel Ø 110cm h=0.3m 234 052270 Fin-Ply 21mm 1500x3000mm 420
045133 Circular Column Panel Ø 110cm h=1.2m 234 052380 3-S Plywood 21mm 5000x2000mm 422
045134 Circular Column Panel Ø 110cm h=2.4m 234 052590 3-S Plywood 21mm 2500x1500mm 422
045135 Circular Column Panel Ø 110cm h=3.0m 234 052620 As-Ply 21mm 2500x1250mm 421
045136 Circular Column Panel Ø 115cm h=0.3m 234 052622 Ply. Chin. Film coated 21mm 1250x2500mm 421
045137 Circular Column Panel Ø 115cm h=1.2m 234 052800 Plywood Elliottis Pine 20mm 2500x1250mm 422
045138 Circular Column Panel Ø 115cm h=2.4m 234 052810 Fin-Ply 9mm SDP 150x 37.5 428
045139 Circular Column Panel Ø 115cm h=3.0m 234 052815 Fin-Ply 9mm SDP 75x 37.5 428
045140 Circular Column Panel Ø 120cm h=0.3m 234 052816 Fin-Ply 9mm SDP 150x 50 428
045141 Circular Column Panel Ø 120cm h=1.2m 234 052818 Fin-Ply 9mm SDP 75x 50 428
045142 Circular Column Panel Ø 120cm h=2.4m 234 052820 PERI Birch 21mm 1250x2500mm 420
045143 Circular Column Panel Ø 120cm h=3.0m 234 052821 PERI Beto 21mm 1250x2500mm 420
045200 Adapter Strip SRS-TRIO l=3.00m 236 052822 PERI Beto 21mm 1500x3000mm 420
045210 Circular Column Platform 25-70, complete 236 052823 Fin-Ply Maxi 20mm 7500x2700mm 420
045211 Circular Column Landing 25-70 236 052824 PERI Beto 21mm 625x2500mm 420
050000 3-S Plywood 21mm 2000x 500mm 422 052827 FinNa-Ply 21mm 2440x1220mm 422
050030 3-S Plywood 21mm 5000x1000mm 422 052828 FinNa-Ply 21mm 2500x1250mm 422
050040 3-S Plywood 21mm 2500x1000mm 422 052829 Fin-Ply Maxi 20mm 5400x2000mm 420
050070 3-S Plywood 21mm 1500x 500mm 422 052830 PERI Spruce 21mm 2500x1250mm 421
050080 3-S Plywood 21mm 2000x 500mm 422 052831 PERI Spruce 21mm 2500x 500mm 421
050190 3-S Plywood 21mm 2000x1000mm 422 052851 PERI Beto-S 21mm 1250x2500mm 420
050200 3-S Plywood 21mm 3000x1000mm 422 054200 Column Panel TRS 270x90 220
051000 Climbing Bracket CB 240 146 054210 Column Panel TRS 120x90 220
051010 Lifting Eye CB 240, galv. 147 054220 Column Panel TRS 60x90 220
051020 Carriage CB 240 146 054230 Column Tie Bolt TRIO, galv. 220
051030 Height Adjusting Unit CB 149 054240 Chamfer Strip 15/15 l=2.70m 221
051040 Rack CB 240 147 054304 Panel TR 330x240 78
051050 Post Extension 180 for CB 151 054305 Panel TRIO Structure TS 330x240 82
051060 Strongback 270 CB 148 054314 Panel TR 330x120 78
051080 Strongback Connector-2, galv. 149 054315 Panel TRIO Structure TS 330x120 82
051090 Connector TRIO-CB 149 054324 Panel TR 330x 90 79
051100 Climbing Bracket CB 160 147 054325 Panel TRIO Structure TS 330x 90 82
051110 Adjustable Brace CB 164-224 148 054334 Panel TR 330x 72 79
051120 Platform Connection CB 160 148 054335 Panel TRIO Structure TS 330x 72 82
051130 Adjusting Unit CB 160 147 054344 Multipurpose Panel TRM 330x72 79
051150 Strongback 380 CB 148 054345 Multipurpose Panel TRIO Structure TSM 330x72 82
051160 Handrail Connector CB 150 054354 Panel TR 330x 60 79
051190 Handrail Post 200 152 054355 Panel TRIO Structure TS 330x 60 82
051200 Platform Post 225 151 054364 Panel TR 330x 30 78
051210 Handrail Post 190 152 054365 Panel TRIO Structure TS 330x 30 82
051220 Handrail Post 370 152 054374 Inside Corner TE 330 80
051230 Finishing Platform Beam CB 152 054375 Corner TRIO Structure TSE 330 82
051250 Tension Belt L=5.70 m / 25 KN 150 054384 Filler Plate LA 330x36 80
051260 Belt Connector CB 150 054391 Wall Thickness Compensation WDA 330x 5 80
051270 Belt Connector Wall 150 054395 Wall Thickness Compensation WDAS 330x 5 83
051410 Ladder 180/6, galv. 138 054401 Wall Thickness Compensation WDA 330x 6 80
051420 Ladder 220/6, galv. 138 054405 Wall Thickness Compensation WDAS 330x 6 83
051430 Sliding Hatch Cover 139 054414 Articulated Corner TGE 330 80
051450 Ladder Safety Cage 150, galv. 138 054430 Filler Support TPA 330 81
051460 Ladder Base, galv. 210 054435 Wall Thickness Comp. WDA 330x10, Alu 80
051610 Side Handrail Post 139 054461 Push-Pull Prop with Kicker Brace TRH 116 100
051630 Intermediate Handrail Post CB 153 054464 Spacer TRH 15-30 98
051640 Coach Screw DIN 571 6x 80, galv. 153 054475 Handrail Post TRH 97
051650 F.H. Bolt DIN 603 M 6x180 w.N, galv. 158 054480 Tie TRH 15-30/99 98
051764 Ratchet Wrench 3/4" 389 054500 Platform TRP 240 72
052002 Plywood Poplar 20mm 2440x1220mm 422 054501 Platform TRP 120 72
052010 Plywood 4mm 2500x1250mm 421 054502 Platform TRP 90 72
052020 Plywood 8mm 2500x1250mm 421 054503 Platform TRP 72 72
052060 Fin-Ply 21mm 1500x2500mm 420 054504 Platform TRP 60 72
052070 Fin-Ply 21mm 1500x4000mm 420 054505 Platform TRP 240 with Hatch 72
052090 Fin-Ply 9mm SDP 150x 75 428 054506 Platform TRP 120 with Hatch 72
052095 Fin-Ply 9mm 1500x3000mm 420 054511 Push-Pull Prop TRP 240-300, cpl. 74
052130 Fin-Ply 9mm SDP 75x 75 428 054512 Push-Pull Prop TRP 300-360, cpl. 74
052150 Fin-Ply 12mm 1500x3000mm 420 054517 Erection Device TRP 200, 10 kN 74
052159 Fin-Ply 15mm 1500x3000mm 420 054518 Strut TRP 74
052240 Fin-Ply 18mm 1500x3000mm 420 054519 End Handrail TRP, foldable 72

479
Item no. Specification Page Item no. Specification Page

054528 Bracing TRP 120 74 061210 Drophead SFK 282

054529 Bracing TRP 240 74 061230 Hex. Bolt DIN 6914 M12x140-10.9 288
056000 GKW Carriage Beam with Rollers 260 061250 Handrail Holder SGH 284
056001 GKW Cross Beam 280, right 260 061260 Handrail Post SGP 245
056002 GKW Cross Beam 280, left 260 061280 Panel Wedge Clip SPKK 285
056003 GKW Ballast Support 260 061290 Panel Clip SPK 285
056004 GKW Diagonal Brace 388 262 061300 Erection Aid SSH, Alu 285
056005 GKW Intermediate Strut 262 262 061310 Tension Sleeve SAO 283
056006 GKW V-Boom Support 261 061500 Pallet SD 150x 75, galv. 288
056007 GKW Diagonal Brace 423 262 061510 Pallet Lifting Trolley 1500mm 289
056008 GKW Horizontal Strut 246 261 061520 Transportation Fork SUG, galv. 286
056009 GKW Cross Brace 316 261 061530 Pallet SD 150x225, galv. 289
056010 GKW Cross Brace 270 262 065016 Wire Crate Pallet 80x120, painted 413
056011 GKW Cross Beam 350, right 260 065017 Drying Locker Klima TS 2000 409
056012 GKW Cross Beam 350, left 260 065018 HM Concrete Scraper l=1180, b= 54 409
056013 GKW Intermediate Strut 324 262 065019 HM Concrete Scraper l= 900, b=102 409
056014 GKW Cross Brace 334 261 065020 HM Concrete Scraper l=1180, b=102 409
056016 GKW Tension Strut for Boom 263 065021 HM Concrete Scraper l=1180, b=170 409
056018 GKW Cross Frame 264 065022 Butt Strap 54/30 mm 409
056019 GKW Boom 600 263 065023 Butt Strap 102/30 mm 409
056020 GKW Parapet Upright 480 264 065024 Butt Strap 170/30 mm 409
056021 GKW Platform Beam 340 265 065025 HM Turnover Board 16/16 mm 409
056022 GKW Handrail Post 266 065026 Ashwood Handle L=1180 mm 409
056023 GKW Corner Handrail Post 266 065027 Spacer Tube rough DR 22 l=2.00m 140
056026 GKW Spindle Coupler, cpl. 265 065030 Spacer Tube rough DR 22 l=0.21m 374
056027 GKW V-Beam 265 065031 Spacer Tube rough DR 22 l=0.27m 374
056028 GKW Compression Unit U100-U160 266 065033 Cone DR 22 374
056029 GKW Anchor Unit 267 065036 Plug DR 22 374
056030 GKW Fastener Kit 267 065039 Stopend Sleeve DW 15 373
056032 GKW Ballast 2.25 t 260 065040 Stopend Trestle 407
061000 Panel SDP 150x75 280 065042 Peg 407
061010 Panel SDP 75x75 280 065045 Wall Clamp 55 408
061011 Panel SDP 150x50 280 065046 Wall Clamp 105 408
061013 Panel SDP 75x50 280 065050 Pallet ST 100/2, galv. 335
061015 Triangular Frame SDR 150x75/27 285 065051 Trestle P 80 408
061016 Triangular Frame SDR 75x75/27 285 065056 UZ Beam Bracket 40 315
061020 Panel SDP 150x37.5 280 065057 UZ Beam Width Adjustment Bar 80 315
061021 Triangular Frame SDR 150x75 285 065058 UZ Beam Yoke Waler 100 315
061022 Triangular Frame SDR 75x75 285 065060 Plug for Stopend Sleeve DW 15 406
061023 End Support SSL 283 065062 Formwork Bracket-2 406
061024 Cover Strip SAL 50 280 065063 Slab Stopend Bar 105 406
061026 Cover Strip SAL 150 280 065065 UZ Beam Width Adjustment Bar 129 315
061027 Cover Strip SAL 75 280 065066 End Handrail Frame 55 198
061030 Panel SDP 75x37.5 280 065067 Lid for Wire Crate Pallet 80x120 413
061035 Drophead SFK/27 282 065068 Wire Crate Pallet 80x120, galv. 413
061036 Filler Timber SPH 225 281 065070 AW Slab Stopend Angle 314
061038 Cover Strip SAL 37.5 280 065071 AW Handrail Post 314
061041 Grid Beam SRO 150 282 065072 AW Clamp 8-10 314
061042 Grid Beam SRO 75 282 065073 Anchor Chain 3.0kN l=2.5m 286
061043 Grid Beam SRO 150/27 282 065074 Turnbuckle 3.0kN, M 12 286
061044 Grid Beam SRO 75/27 282 065075 AW Bracket 314
061045 Edge Beam SRT-2 150 281 065076 Wall Clamp 75 408
061046 Edge Beam SRT-2 75 281 065080 Pallet HS 120x90, galv. 126
061049 Filler Timber SPH 150 281 065081 Pallet HS 150x90, galv. 126
061051 Wall Holder SWH-2 283 065100 Corner Reveal ASP, WD 20, 42.7 cm 416
061052 Table Connector STV 288 065101 Corner Reveal ASP, WD 20, 49.0 cm 416
061060 Platform SDB 150 287 065102 Corner Reveal ASP, WD 20, 70.5 cm 416
061061 Platform SDB 225 287 065103 Corner Reveal ASP, WD 20, 193.5 cm 416
061062 Platform SDB 300 287 065104 Striking Strip ASP, WD 20, 70/21 416
061066 Plywood Planking SDB 150 287 065105 Vertical Reveal ASP, WD 20, 193.5 cm 416
061067 Plywood Planking SDB 225 287 065106 Corner Reveal ASP, WD 24, 42.7 cm 416
061068 Plywood Planking SDB 300 287 065107 Corner Reveal ASP, WD 24, 49.0 cm 416
061100 Main Beam SLT 225 281 065108 Corner Reveal ASP, WD 24, 70.5 cm 416
061110 Main Beam SLT 150 281 065109 Corner Reveal ASP, WD 24, 193.5 cm 416
061160 Main Beam SLT 375 281 065110 Striking Strip ASP, WD 24, 70/21 416
061180 Combihead SCK 284 065111 Vertical Reveal ASP, WD 24, 193.5 cm 416
061200 Prophead SSK 282 065112 Corner Reveal ASP, WD 25, 42.7 cm 416

480
Item no. Specification Page Item no. Specification Page

065113 Corner Reveal ASP, WD 25, 49.0 cm 416 066083 Bulkhead Tie DAS, galv. 112
065114 Corner Reveal ASP, WD 25, 70.5 cm 416 066084 Compensation Waler DAR 80 110
065115 Corner Reveal ASP, WD 25, 193.5 cm 416 066085 Scaffold Bracket DG 85 111
065116 Striking Strip ASP, WD 25, 70/21 416 066086 Top Tie Bracket DAH, galv. 113
065117 Vertical Reveal ASP, WD 25, 193.5 cm 416 066088 Chamfer Strip DSD 250 114
065118 Corner Reveal ASP, WD 30, 42.7 cm 416 066090 Foundation Tie Clamp DOMINO DLS 113
065119 Corner Reveal ASP, WD 30, 49.0 cm 416 066091 Lifting Hook DOMINO 500kg 110
065120 Corner Reveal ASP, WD 30, 70.5 cm 416 066093 Transporting Device DOMINO 114
065121 Corner Reveal ASP, WD 30, 193.5 cm 416 066094 Stacking Device DOMINO, galv. 113
065122 Striking Strip ASP, WD 30, 70/21 416 066095 Positioning DGE 135° internal 105
065123 Vertical Reveal ASP, WD 30, 193.5 cm 416 066097 Positioning DGE 135° external 105
065124 Framing Member ASP, l=2.50m 417 066099 Stacking Aid DOMINO DSW 114
065125 Framing Member ASP, l=3.00m 417 066100 Positioning DEA 90° 105
065126 Framing Member ASP, l=3.50m 417 070100 Hex. Bolt ISO 4016 M12x120-4.6, with Nut 401
065127 Stiffening Panel ASP, 87.0x 74.5 cm 417 070740 Erection Bar GT/VT, galv. 296
065128 Stiffening Panel ASP, 60.0x125.0 cm 417 070750 End Protection Cap GT 24, galv. 4
065129 Stiffening Panel ASP, 60.0x150.0 cm 417 070760 Crane Splice GT 24 19
065130 Cutting Cost ASP 417 071200 Cleaning Plywood and Frame DOMINO 429
066020 Panel D 250x100 104 071202 RS Cleaning Service TRIO 426
066021 Panel Alu DA 250x100 104 071204 Additional Cleaning Cost 426
066022 Panel D 250x 75 104 071205 Repair Service RK 270x240, 330x240 426
066023 Panel Alu DA 250x 75 104 071206 Repair Service RK 270/330x120/90/72 426
066024 Multi Panel DM 250x75 104 071207 Repair Service RK Panel h=120/90/60 426
066025 Panel D 250x 50 104 071208 Repair Service RK IE, Panel TRM, TR 426
066026 Panel D 250x 25 104 071209 RS Cleaning Service SKYDECK 428
066028 Outside Corner Angle DAW 250 105 071210 Repair Service RG 270x240, 330x240 426
066029 Articulated Corner DGE 250 105 071211 Repair Service RG 270/330x120/90/72 426
066030 Wall Thickness Compensation DWD 250x 5 105 071212 Repair Service RG Panel h=120/90/60 426
066032 Multi Panel Alu DMA 250x75 104 071213 Repair Service RG IE, Panel TRM, TR 426
066033 Filler Support DPA 250 105 071214 Repair Service RK SKYDECK Panel 150x75 428
066034 Filler Support DPA 250/27 105 071215 Repair Service RK SKYDECK Filler Panels 428
066035 Column Panel D 250x40 115 071216 Sealing Hole Ø 60mm 426
066036 Column Panel D 250x35 115 071217 Sealing Hole Ø 40mm 426
066037 Column Panel D 250x30 115 071271 Assembly on Site - per Hour 430
066038 Column Panel D 250x20 115 071290 Static Calculation 430
066040 Panel D 125x100 106 071291 Structural Calculation for Approval 430
066041 Panel D 125x 75 106 071340 Formwork Repair i.e. Weldings 426
066042 Multi Panel DM 125x75 106 071350 Design Work and Technical Support 430
066043 Panel D 125x 50 106 071351 Shop Drawings for TRIO, DOMINO, HANDSET 430
066044 Panel D 125x 25 106 071352 Shop Drawings for VARIO, RUNDFLEX 430
066046 Outside Corner Angle DAW 125 107 071353 Allowance for Single Sided Application 430
066047 Articulated Corner DGE 125 107 071354 Allowance for Double Sided Application 430
066048 Wall Thickness Compensation DWD 125x 5 107 071355 Shop Drawings for SKYDECK 430
066050 Panel Alu DA 125x100 106 071356 Shop Drawings for MULTIFLEX 430
066051 Panel Alu DA 125x 75 106 071357 Shop Drawings for Slab Tables 430
066052 Multi Panel Alu DMA 125x75 106 071358 Shop Drawings for ASG 160, FB 180 430
066053 Filler Support DPA 125 107 071359 Shop Drawings for KG, CB, SKS 430
066054 Filler Support DPA 125/27 107 071361 Shop Drawings for Special Forms 430
066055 Column Panel D 125x40 115 071362 Design Work incl. Cycle Plans, Parts List 430
066056 Column Panel D 125x35 115 071364 Supervisor per Day 430
066057 Column Panel D 125x30 115 072140 Bit Point TX 30 388
066058 Column Panel D 125x20 115 072150 Electric Power Wrench ASB 636, M 14 388
066060 Panel D 75x100 108 072160 Extension 1/2" l=250mm 277
066061 Panel D 75x 75 108 072170 Socket SW 13-1/2" l=80mm 388
066062 Multi Panel DM 75x75 108 072180 Ratchet Wrench 1/2 " 170
066063 Panel D 75x 50 108 072210 Universal Power Srewdriver SCU 7-9 388
066064 Panel D 75x 25 108 072220 Bitholder for SCU 7-9 388
066066 Outside Corner Angle DAW 75 108 072230 Magnetic Bitholder for SCU 7-9 388
066067 Articulated Corner DGE 75 108 072240 Depth Chuck for SCU 7-9 388
066068 Wall Thickness Compensation DWD 75x 5 108 072700 Table Module VT 2.00/2.15x4.00m 304
066070 Column Panel D 75x40 115 072710 Table Module VT 2.00/2.15x5.00m 304
066071 Column Panel D 75x35 115 072720 Table Module VT 2.50/2.65x4.00m 304
066072 Column Panel D 75x30 115 072730 Table Module VT 2.50/2.65x5.00m 304
066073 Column Panel D 75x20 115 074610 Girder VT 16K, l=2.45m 5
066080 Alignment Coupler DRS 110 074620 Girder VT 16K, l=2.90m 5
066081 Wedge Clamp DKS 110 074630 Girder VT 16K, l=3.30m 5
066082 Brace Connector DRA 112 074640 Girder VT 16K, l=3.60m 5

481
Item no. Specification Page Item no. Specification Page

074650 Girder VT 16K, l=3.90m 5 100355 Steel Deck UDS 32x150 450
074660 Girder VT 16K, l=4.90m 5 100373 Steel Deck UDS 32x200 450
074670 Girder VT 16K, l=5.90m 5 100375 Steel Deck UDS 32x250 450
074890 Girder VT 20K, l=2.65m 5 100411 Adj. Base Plate UJB 38-50/30 434
074900 Cutting Cost Girder VT 5 100541 Connector for Platform VARIO 25
074905 Girder VT 20K, l=2.15m 5 100660 Frame Pallet USP 72 414
074910 Girder VT 20K, l=2.45m 5 100678 Frame Pallet USP 104 397
074920 Girder VT 20K, l=2.90m 5 100707 Lashing 25x5750mm 397
074930 Girder VT 20K, l=3.30m 5 100737 Staircase UAS 250/200 448
074940 Girder VT 20K, l=3.60m 5 100738 Staircase UAS 300/200 448
074950 Girder VT 20K, l=3.90m 5 100742 Stair Guardrail UAG 449
074960 Girder VT 20K, l=4.50m 5 100778 Stiffening Board, timber, 420x400mm 304
074970 Girder VT 20K, l=4.90m 5 100813 Platform Handrail 80 VARIO 25
074980 Girder VT 20K, l=5.90m 5 100830 Stair Guardrail UAH Inside 449
074990 Girder VT 20K, l=1.45m 5 100863 Handle Lock UJS 435
075000 Girder GT24, Spec. Length l=6.00-17.80m 4 100901 SB-L Tension Strut, l=740mm 359
075090 Girder GT24 l=0.60m RF 4 100903 SB-L Anchor Bracket 359
075100 Girder GT24 l=0.90m 4 100954 Table Swivel Head, Middle Part 303
075120 Girder GT24 l=1.20m 4 100955 Table Swivel Head, Upper Part 303
075150 Girder GT24 l=1.50m 4 100956 Table Swivel Head, Lower Part 303
075180 Girder GT24 l=1.80m 4 101079 Handrail Extension ASZ 193
075210 Girder GT24 l=2.10m 4 101083 Rear Handrail Section ASZ 193
075240 Girder GT24 l=2.40m 4 101085 Rear Handrail Section ASG 192
075270 Girder GT24 l=2.70m 4 101159 Ledger UH 100 437
075300 Girder GT24 l=3.00m 4 101241 Element VARIO S 250x240 8
075330 Girder GT24 l=3.30m 4 101242 Element VARIO S 250x300 8
075360 Girder GT24 l=3.60m 4 101243 Element VARIO S 250x360 8
075390 Girder GT24 l=3.90m 4 101244 Element VARIO S 250x420 8
075420 Girder GT24 l=4.20m 4 101245 Element VARIO S 250x480 8
075450 Girder GT24 l=4.50m 4 101246 Element VARIO S 250x540 8
075480 Girder GT24 l=4.80m 4 101247 Element VARIO S 250x600 8
075510 Girder GT24 l=5.10m 4 101248 Element VARIO S 187.5x240 8
075540 Girder GT24 l=5.40m 4 101249 Element VARIO S 187.5x300 8
075570 Girder GT24 l=5.70m 4 101250 Element VARIO S 187.5x360 8
075600 Girder GT24 l=6.00m 4 101251 Element VARIO S 187.5x420 8
079300 Alu Beam MPB 24 l=3.00m 342 101252 Element VARIO S 187.5x480 8
079360 Alu Beam MPB 24 l=3.60m 342 101253 Element VARIO S 187.5x540 8
079420 Alu Beam MPB 24 l=4.20m 342 101254 Element VARIO S 187.5x600 8
079480 Alu Beam MPB 24 l=4.80m 342 101255 Element VARIO S 125x240 8
079540 Alu Beam MPB 24 l=5.40m 342 101256 Element VARIO S 125x300 8
079600 Alu Beam MPB 24 l=6.00m 342 101257 Element VARIO S 125x360 8
098217 Radius Template RUNDFLEX E85/I72 49 101258 Element VARIO S 125x420 8
099540 Radius Temp. RUNDF. O250/I240, O128/I123 49 101259 Element VARIO S 125x480 8
100000 Top Standard UVH 100 436 101260 Element VARIO S 125x540 8
100003 Top Standard UVH 150 436 101261 Element VARIO S 125x600 8
100005 Top Standard UVH 200 436 101269 Platform Strut 246 VARIO 25
100007 Top Standard UVH 250 436 101273 Platform Strut 167 VARIO 25
100009 Standard UVR 200 436 101290 Handrail Holder GT24/VT20 310
100012 Standard UVR 300 436 101306 Standard UVR 100 436
100013 Standard UVR 400 436 101309 Top Standard UVH 50 436
100014 Base Standard UVB 24 436 101311 Protection Board 250 8
100017 Ledger UH 75 437 101318 Protection Board 187.5 8
100021 Ledger UH 150 437 101319 Protection Board 125 8
100023 Ledger UH 200 437 101404 Protection Board 100 8
100025 Ledger UH 250 437 101405 Element VARIO S 100x600 8
100027 Ledger UH 300 437 101406 Element VARIO S 100x540 8
100029 Ledger UH 400 437 101407 Element VARIO S 100x480 8
100042 Horizontal Brace UBH 150/150 438 101408 Element VARIO S 100x420 8
100047 Horizontal Brace UBH 200/200 438 101409 Element VARIO S 100x360 8
100049 Horizontal Brace UBH 250/250 438 101410 Element VARIO S 100x300 8
100051 Horizontal Brace UBH 300/150 438 101411 Element VARIO S 100x240 8
100053 Horizontal Brace UBH 300/300 438 101464 Protection Board IE 75/75 8
100055 Ledger Brace UBL 150/100 437 101465 Inside Corner Panel VARIO S 75/75x600 8
100059 Ledger Brace UBL 200/100 437 101467 Inside Corner Panel VARIO S 75/75x480 8
100063 Ledger Brace UBL 250/100 437 101469 Inside Corner Panel VARIO S 75/75x360 8
100067 Ledger Brace UBL 300/100 437 101470 Inside Corner Panel VARIO S 75/75x300 8
100242 Adj. Base Plate UJB 38-80/55 434 101471 Inside Corner Panel VARIO S 75/75x240 8

482
Item no. Specification Page Item no. Specification Page

101592 Handrail Post Holder TRIO 71 102219 GKB Abutment Platform 180x240 273
101621 Tension Relase Plate SB DW 26 362 102220 GKB Abutment Platform 180x120 273
101671 Landing Link Panel UAB 30 448 102251 Central Cross 200 305
101706 Shutter Joint Profile 21/40 l=3.00m 20 102317 GKB Socket M24/15-35 277
101773 Heavy Duty Spindle SLS 80/140 243 102327 GKB Cantilever Parapet Bracket 180 271
101774 Heavy Duty Spindle SLS 100/180 243 102328 GKB Soffit Formwork Beam 272
101776 Heavy Duty Spindle SLS 140/240 243 102329 GKB Side Formwork Beam 272
101778 Heavy Duty Spindle SLS 200/300 243 102390 Drill- and Pretension Device 45° 378
101779 Heavy Duty Spindle SLS 260/360 243 102394 GKB Anchor Bolt M24x200/10° 277
101813 Filler Profile TPP 270, Alu 63 102395 GKB Handrail Post 270
101823 Filler Profile TPP 120, Alu 63 102396 GKB Handrail Post 115° 276
101829 Filler Profile TPP 330, Alu 81 102400 Swivel Coupling DK 38/48, galv. 394
101834 Filler Profile TPP 270/27, Alu 63 102415 Platform VARIO 100x125 with Hatch 22
101839 Filler Profile TPP 120/27, Alu 63 102778 GKB Side Formwork 60x120 272
101846 Filler Profile TPP 330/27, Alu 81 102779 GKB Side Formwork 60x245 272
101854 Central Cross 170 305 102784 Socket SW 24-1/2" 246
101856 Striking Strip ASP, WD 20, 70-250/21 416 102785 Socket SW 36-3/4" 277
101857 Striking Strip ASP, WD 24, 70-250/21 416 102786 Adapter 1/2" - 3/4" 277
101859 Striking Strip ASP, WD 25, 70-250/21 416 102807 Ballast 10 kg ASW 397
101861 Striking Strip ASP, WD 30, 70-250/21 416 102825 Coupling VKS 99 Architec. Concrete 14
101862 Lifting Fork 1t/5.0m 307 102846 Ledger Brace UBL 150/150 437
101916 Height Compensation HD, h=200mm 254 102853 Inside Panel I 123x120 2R 43
101927 Stopend Panel DOMINO AT 250x3 109 102854 Outside Panel O 128x120 2R 43
101928 Stopend Panel DOMINO MTF 250x20 109 102855 Inside Panel I 240x120 2R 42
101929 Stopend Panel DOMINO MTF 250x24/25 109 102856 Outside Panel O 250x120 2R 42
101930 Stopend Panel DOMINO MTF 250x30 109 102859 Standard UVR 50 436
101931 Stopend Panel DOMINO MTF 250x35/36 109 102860 Standard UVR 150 436
101934 Stopend Panel DOMINO AT 125x3 109 102861 Ledger Brace UBL 250/150 437
101935 Stopend Panel DOMINO MTF 125x20 109 102862 Ledger Brace UBL 200/150 437
101936 Stopend Panel DOMINO MTF 125x24/25 109 102920 Platform VARIO 100x187.5 22
101937 Stopend Panel DOMINO MTF 125x30 109 102945 Alignment Clamp VRS Architect. Concrete 14
101940 Stopend Panel DOMINO MTF 125x35/36 109 102988 Pressure Plate Articulated Joint 135
101964 Wall Thickness Compensation DWD 125x10 107 103054 Articulated Coupling GKS 60/60 14
101986 Wall Thickness Compensation DWD 250x10 105 103058 Prop PEP 20-300 345
101995 Concrete Cone Gauge 384 103059 Prop PEP 20-350 345
102018 Base Plate-2 for RS 1000/1400, galv. 359 103060 Prop PEP 20-400 345
102025 Folding Base Unit 160/190 ASW 397 103061 Prop PEP 20-500 345
102026 Entry Platform 190 ASW 397 103062 Prop PEP 30-300 345
102027 Double Handrail 190 ASW 397 103063 Prop PEP 30-350 345
102028 Diagonal Brace 210 ASW 397 103065 Prop PEP 30-400 345
102029 Horizontal Brace 190 ASW 397 103066 Prop PEP 30-150 345
102030 Toe-Board Set 70/190 ASW 397 103067 Prop PEP 30-250 345
102031 Stripping Cart ASW 465, complete 290 103203 Platform VARIO 100x100 22
102033 Steel Traverse 140/220 ASW 397 103212 Lifting Fork 1.75t/8.0m 308
102034 Vertical Frame 70/120 ASW 397 103274 Fin-Ply 18mm TEI 120/135° left 427
102035 Vertical Frame 70/ 90 ASW 397 103275 Fin-Ply 18mm TEI 120/135° right 427
102037 Wind Security Clip 60 ASW 397 103284 Internal Corner TEI 120/135° 60
102098 PERIDRAIN Clip 398 103311 Fin-Ply 18mm TEI 270/135° 427
102099 PERIDRAIN Edge Strip Clip 398 103317 Internal Corner TEI 270/135° 60
102109 Spax Screw SK 3.5x45 398 103321 Fin-Ply 18mm TAE 120/135° left 427
102110 PERIDRAIN Edge Strip 121x3000x12 398 103323 Fin-Ply 18mm TAE 120/135° right 427
102111 Anchor Sleeve M24, galv. 277 103330 Outside Corner TEA 120/135° 60
102176 Circular Column Landing 75-120 237 103333 Fin-Ply 18mm TEA 270/135° 427
102177 Circular Column Platform 75-120, complete 237 103337 Outside Corner TEA 270/135° 60
102178 Handrail 184, galv. 237 103362 Ladder Connector TRIO, galv. 221
102184 GKB Cantilever Parapet Platform 180x240 270 103369 Ladder Connector RAPID, galv. 209
102185 GKB Cantilever Parapet Platform 180x120 271 103374 Ladder Connector SRS, galv. 239
102186 GKB Protection Board 240 270 103391 Ladder Connector QUATTRO, galv. 227
102187 GKB Protection Board 120 271 103417 Exit Handrail Post SRS 134, galv. 239
102188 GKB Protection Board 90/120 276 103429 Pallet RP/2 80x150, galv. 412
102190 GKB Soffit Formwork 45x245 272 103434 Pallet RP/2 80x120, galv. 412
102193 GKB Soffit Formwork 45x120 272 103443 TSS-Torx 8x78, galv. 403
102195 GKB Formwork Projecting Slab 140x120 276 103444 TSS-Torx 8x38, galv. 403
102196 GKB Spindle for Cantilever Slab Formwork 276 103513 Drop-in Corner ASU 90° 194
102197 GKB Work Cage 274 103518 Hex. Bolt ISO 4014 M 8x190-8.8, galv. 400
102210 Back Stop Lifting Fork 1t / 5.0m 308 103606 Anchor Bolt PERI MMS 20x130 100
102217 GKB Abutment Bracket 180 273 103716 TRS Clamp DW 15, galv. 221

483
Item no. Specification Page Item no. Specification Page

103718 Ladder Hook, galv. 139 104780 Ledger UH 25 437

103721 Inserting Nut TRS, complete 221 104803 FTF Wrench SW 38/1500 34
103724 End Ladder 180/2, galv. 210 104892 TSS-Torx 8x44, galv. 403
103737 Universal Coupling UK 70 14 104929 Hex. Bolt ISO 4014 M 8x150-8.8, galv. 400
103740 Hex. Bolt ISO 4016 M16x280-4.6, with Nut 135 104930 Hook Strap Uni Doubel HBUD 20-24 15
103753 Handrail Extension ASU 194 104931 Hook Strap Uni HBU 20-24 15
103800 Push-Pull Prop RS 1400, galv. 350 104958 Wall Scaffold Hinge ASE 201
103845 Hook Strap Uni HBU 24-28 15 105311 Reverse Plate Twist Drill HM Ø 40 mm 391
103850 Outside Corner Coupling AKZ 85/85 14 105317 Pre-cutter HM (Drill Ø 40mm) 391
103865 Handrail Frame for End Platform 23 105318 Reverse Plate HM (Ø 40mm) 391
103868 Steel Waler Universal SRU U120 l=0.72m 12 105326 Reverse Plate Twist Drill VHM Ø 60mm 391
103871 Steel Waler Universal SRU U120 l=0.97m 12 105327 Torx for Reverse Plate Ø 60mm 391
103874 Steel Waler Universal SRU U120 l=1.22m 12 105328 Centrepivot VHM (Ø 60mm) 391
103877 Steel Waler Universal SRU U120 l=1.47m 12 105330 Reverse Plate VHM 28,5 (Ø 60mm) 391
103886 Steel Waler Universal SRU U120 l=1.72m 12 105331 Pre-cutter VHM (Drill Ø 60mm) 391
103889 Steel Waler Universal SRU U120 l=1.97m 12 105346 Torx for Centrepivot Ø 60mm 391
103892 Steel Waler Universal SRU U120 l=2.47m 12 105347 Torx for Pre-cutter Ø 60 391
103898 Steel Waler Universal SRU U120 l=2.22m 12 105367 Torx for Reverse Plate/Pre-cutter Ø 40mm 391
103903 Steel Waler Universal SRU U120 l=2.97m 12 105400 Pin Ø 20x140, galv. 226
103906 Steel Waler Universal SRU U120 l=3.47m 12 105401 Crane Eye BR 2.5t 175
103915 Steel Waler Universal SRU U120 l=3.97m 12 105448 Chamfer Strip QDL 350 227
103918 Steel Waler Universal SRU U120 l=4.47m 244 105480 Platform Beam VARIO, left 24
103922 Steel Waler Universal SRU U120 l=4.97m 12 105484 Platform Beam VARIO, right 24
103925 Steel Waler Universal SRU U120 l=5.47m 12 105523 Shaft Panel TSE 270 60
103928 Steel Waler Universal SRU U120 l=5.97m 12 105524 Shaft Panel TSE 120 60
103929 Steel Waler Universal SRU U120 l=2.72m 12 105525 Shaft Panel TSE 330 81
103932 End Platform VARIO 23 105585 Lifting Chain, 2-Strands, 6.0m, adj. 166
103938 Corner Coupling EKZ 47/43 36 105588 Spreader Beam 2.5t 166
103942 FTF Tie Plate DW 15, complete 36 105791 Transportation Wheel QUATTRO 230
103943 Steel Waler Universal SRU U140 l=4.97m 12 105822 Pin Ø 20x102, galv. 33
103944 FTF Waler Coupler w. Brace Connector 33 105823 Platform Bracket VARIO VBK 90 24
103945 FTF Spindle Guide 33 105843 Platform ASG 70-100/240 203
103946 FTF Platform 36 105844 Platform ASG 70-100/298 203
103949 FTF Bracket with spindle 33 105845 Bracket ASG 70-100 203
103981 FTF 500 Bracket 32 105905 Cable 2-Strands Ø=10mm, L=4.0m 35
103992 External Corner Platform VARIO 23 105907 Clip for Bracket 70/100 203
103993 Prop Section HDSS 210 250 105925 Industrial Deck UDI 25x 75 438
104017 FTF Tie Unit 65, complete 36 105953 Stopend Panel TRIO AT 270x5 61
104018 FTF End Guardrail, complete 37 105978 Stopend Panel TRIO AT 120x5 61
104027 Attachment VARIO 24 U120 244 105985 Platform VARIO 100x250 with Hatch 22
104029 Industrial Deck UDI 25x 50 438 105986 Platform VARIO 100x250 22
104031 Filler Pin Ø 21x120 14 106000 Base Plate-2 for RSS 35
104032 Tool Box TRH 96 106081 Router DW 625-E 391
104050 Extension 60 for Striking Trolley 305 106087 Top Tie TRH 98
104064 Ladder Connector VARIO, galv. 216 106092 Industrial Deck UDI 25x100 334
104070 FTF Spindle Guide with Spindle 33 106126 Base Spindle TRH 75
104083 FTF Waler Coupler 33 106147 Handrail TRH 180 Retractable 97
104096 Hook Strap Uni Doubel HBUD 24-28 15 106148 Handrail TRH 270 Retractable 97
104131 Handrail Holder SRU/SRZ 245 106183 Main Beam Clamp HD 70mm, galv. 254
104132 Ladder Safety Cage 75, galv. 138 106429 Prop PEP 10-400 A 344
104181 GKB Work Cage Protection Panel 275 106432 Prop PEP 10-350 A 344
104195 FTF Assembly foot 34 106433 Prop PEP 10-300 A 344
104196 Ladder Holder SRS, galv. 239 106434 Prop PEP 10-250 A 344
104278 Zyl Bolt ISO 4762 M12x60-8.8, galv. 453 106582 Stringer Frame UZF 200 451
104356 Horizontal Brace UBH 250/200 438 106583 Stringer Frame UZF 250 451
104528 Zyl Bolt ISO 4762 M12x60-8.8, galv. 451 106585 Steel Deck UDS 32x150 Public 450
104643 SK Lead Cone DW 15 382 106586 Steel Deck UDS 32x200 Public 450
104646 Ladder Connector HD 200 256 106587 Steel Deck UDS 32x250 Public 450
104647 TSS-Torx 8x58, galv. 403 106608 Landing with Ladder TRH 90 75
104674 Panel QUATTRO QE 350 226 106626 Ledger with Lap UHP 200 454
104675 Handrail Post ASG 198 106661 Brace Frame SB Mounting Shoe 366
104744 FTF Clamp 33 106662 Brace Frame Adaptor SB A0,A,B 366
104754 Finishing Platform Waler SKS 164 106877 Handrail Post Holder DOMINO 111
104755 Handrail Post SKS 165 106880 Industrial Deck UDI 25x125 438
104756 Finishing Platform Post SKS 3 164 106931 Horizontal Brace UBH 250/150 438
104757 Finishing Platform Post SKS 4 164 106939 Pallet RP 110x125, painted 412
104766 Ledger Brace UBL 300/150 437 106989 Crosshead PEP 10 / VT 20 344

484
Item no. Specification Page Item no. Specification Page

107002 Industrial Deck UDI 25x150 438 108540 Industrial Deck UDI 25x250 438
107007 Tension Anchor Connector CB 150 108543 Coupling BPA Ø 125 246
107008 Tension Anchor Connector Wall 150 108544 End Guardrail Post UZE 250 451
107009 Corner Platform TRP 73 108545 Guardrail Frame UZG 25 454
107019 Retainer Corner Platform TRP 73 108566 Ladder TRH 264 97
107021 Corner Handrail TRP 73 108568 Ladder TRH 354 97
107152 Tripod PEP 10 344 108688 BPA Ø 125 Adapter TRIO 246
107160 Connector MP-SRU 343 108689 Industrial Deck UDI 25x300 438
107161 Compression Brace Head MP/SRU 343 108719 Tie Rod Spanner TRH SW 22 98
107162 Stringer Frame UZF 150 451 108785 Outside Corner TRH 330-90x90 90
107178 End Guardrail Post UZE 200 451 108795 Rock Anchor HB DW 15 360
107185 Hex. Bolt ISO 4014 M 8x180-8.8, galv. 400 108808 Outside Corner TRH 420-90x90 94
107348 Splice MPB 24 342 108830 Inside Corner TRH 420-66x66 94
107448 Stair Stringer UZS 250/150 450 108842 Inside Corner TRH 330-66x66 90
107470 Element TRH 264x180 I 86 108855 Stopend Panel DOMINO AT 250x5 109
107472 Element TRH 264x360 I 88 108856 Stopend Panel DOMINO AT 125x5 109
107473 Element TRH 264x360 O 88 108869 Sleeve for pre-cast wall mounting ASG 204
107474 Element TRH 264x180 O 86 108870 Pre-Cast Wall Mounting ASG 204
107480 Element TRH 264x270 I 87 108983 Element w. Corner Platform TRH 264x270 I 91
107481 Element TRH 264x270 O 87 108984 Element w. Corner Platform TRH 354x270 I 95
107492 Element TRH 264x540 I 89 108995 Extension Waler TRH 125 101
107493 Element TRH 264x540 O 89 109105 Ladder Base 30 adjustable, galv. 139
107497 Element TRH 354x180 I 92 109563 Head Spindle Locking Device UJH 435
107498 Element TRH 354x180 O 92 401395 Coupling Offset VVKZ 3/99 13
107502 Element TRH 354x270 I 93 700485 Betoplan Strip 8x20x2500mm 49
107503 Element TRH 354x270 O 93 700843 Corner Protection Profile TE/TAE 270 426
107546 Push-Pull Prop TRP 150-210, cpl. 74 700844 Corner Protection Profile TAE 90 426
107600 Angle TRH 180x 6 96 700845 Corner Protection Profile TE 120 426
107601 Angle TRH 270x 6 96 700846 Corner Protection Profile TE 60 426
107607 Angle TRH 180x15 96 701991 Welding Plate 50x20x120 28
107608 Angle TRH 270x15 96 706454 Washer ISO 7089-200 HV A 20, galv. 402
107738 Ladder 240-360 25 706488 Hex. Nut ISO 4032 M24-10, galv. 401
107793 Hinged Step TRP 75 706489 Hex. Bolt ISO 4017 M 24x 80-10.9 400
107801 Shoring Brace UBS 150/100 437 710001 End Plate SRZ 11
107810 Shoring Brace UBS 150/150 437 710219 Hex. Bolt ISO 4014 M16x100-8.8, galv. 243
107820 Assembly Plate MPB 24 342 710220 Hex. Bolt ISO 4014 M12x 80-8.8, galv. 400
107930 Standard UVR 300 Public 453 710221 Hex. Bolt ISO 4014 M12x 60-8.8, galv. 400
107977 Gap Filler UZD 150x37 452 710222 Hex. Bolt ISO 4014 M16x 80-8.8, galv. 400
107981 Gap Filler UZD 150x16 452 710224 Hex. Bolt ISO 4017 M 12x 40-8.8, galv. 400
107986 Gap Filler UZD 150x31 452 710225 Hex. Bolt ISO 4017 M 16x 45-8.8, galv. 400
108000 Landing Brace UZB 150 452 710226 Hex. Bolt ISO 4014 M20x 90-8.8, galv. 400
108010 Gap Filler UZD 200x16 452 710229 Hex. Nut ISO 4032 M16-8, galv. 243
108011 Gap Filler UZD 250x16 452 710231 Hex. Bolt ISO 4017 M 16x 30-8.8, galv. 400
108034 Landing Brace UZB 90° 452 710232 Hex. Bolt ISO 4014 M16x130-8.8, galv. 400
108053 Handrail Post RGP 120 407 710233 Hex. Bolt ISO 4014 M16x110-8.8, galv. 400
108108 PERI Table Lift PTL 1250 306 710240 F.H. Bolt DIN 603 M 8x100 w.N, galv. 15
108129 Tie Rod Spanner DW 15 370 710262 Selftapping Screw 5.5x45 TX 30, galv. 49
108135 Kicker AV 210 348 710265 Hex. Bolt ISO 4017 M 24x 35-8.8, galv. 400
108162 Bearing Box BR 175 710266 Hex. Bolt ISO 4017 M 12x 25-8.8, galv. 400
108172 Landing Brace UZB 200 452 710284 Hex. Bolt ISO 4014 M 8x 60-8.8, galv. 400
108179 Landing Brace UZB 250 452 710285 Hex. Bolt ISO 4014 M 8x100-8.8, galv. 400
108189 Stair Guardrail UZG 250/150 451 710290 T-Head Bolt M14x98/110, galv. 394
108190 Landing Guardrail UZG 150 453 710295 F.H. Bolt DIN 603 M 6x180 w.N, galv. 401
108191 Landing Transom UZL 150 452 710299 Hex. Bolt ISO 4014 M16x 60-8.8, galv. 400
108213 Brace Connector MPB 24 343 710326 F.H. Bolt DIN 603 M 8x60 w.N, galv. 182
108214 Guardrail Filler 454 710330 Hex. Nut ISO 4032 M12-10, galv. 401
108218 Guardrail Connector, Straight 454 710334 Hex. Nut ISO 4032 M20-8, galv. 243
108225 Kicker TRH 135 100 710336 Hex. Nut ISO 4032 M30-10, galv. 401
108286 Assembly Bolt MPB 24 with Nut 342 710338 Hex. Nut ISO 4032 M16-10, galv. 401
108339 Quick Strap MPB 24 342 710340 Flanged Nut M14 SW19, yellow 394
108360 Anchor Sleeve M24, Stainless spec. Length 277 710381 Hex Nut ISO 7042 M12-8, galv. 451
108380 Industrial Deck UDI 25x200 438 710709 F.H. Bolt DIN 603 M 8x 65 w.N, galv. 401
108387 Guardrail Connector, Corner 454 710886 Washer ISO 7093-1 200 HV A 16, galv. 402
108412 Landing Cover Plate UZD 150/25 453 711071 Hex. Nut ISO 7042 M 8-8, galv. 401
108493 Concrete Pump Connector BPA Ø 125 246 711074 Washer ISO 7089-200 HV A 16, galv. 402
108504 Clear Slide BPA Ø 125 246 711078 Hex. Bolt ISO 4014 M20x130-8.8, galv. 400
108536 End Guardrail Post UZE 150 451 715357 Pin Ø 16x150, galv. with washer 183

485
Item no. Specification Page Item no. Specification Page

720610 Hex Bolt ISO 4014 M12x70-8.8, galv. 451 740526 Fin-Ply 15mm D 125x20 429
722083 Rivet DIN 7337 A 8x23, Alu 402 740527 Fin-Ply 15mm D 75x40 429
722086 Hex. Nut ISO 7042 M 6-8, galv. 401 740528 Fin-Ply 15mm D 75x35 429
722169 Hex. Bolt ISO 4014 M16x140-8.8, galv. 400 740529 Fin-Ply 15mm D 75x30 429
722318 Rivet DIN 7337 A 6x10, Steel 402 740531 Fin-Ply 15mm D 75x20 429
722859 Hex. Bolt ISO 4014 M 8x140-8.8, galv. 400 740770 Fin-Ply 18mm TRA 90x 30 427
723439 F.H. Bolt DIN 603 M 8x 80 w.N, galv. 401 745300 Fin-Ply 18mm TR 270x240 2 Plates 427
723910 Crane Eye A18 32 745303 Fin-Ply 18mm TR 270x240 1 Plate 427
724500 Pin Ø 20x 42, galv. 227 745305 Fin-Ply 18mm TR 120x240 427
725462 F.H. Bolt DIN 603 M 8x140 w.N, galv. 401 745319 Fin-Ply 18mm TAE 90/2 427
725574 Washer ISO 7089-200 HV A 14, galv. 402 745321 Fin-Ply 18mm TE 60/2 427
726055 Betoplan Strip 4x20x2500mm 49 745322 Fin-Ply 18mm TE 120/2, left 427
727056 EFD Paint red 1l 426 745323 Fin-Ply 18mm TE 120/2, right 427
727057 EFD Paint red 5l 426 745324 Fin-Ply 18mm TE+TAE 270/2 427
727058 EFD Paint yellow 1l 426 745329 Fin-Ply 18mm TRM+TRM/4 330x72 l=998mm 427
727059 EFD Paint yellow 5l 426 745340 Fin-Ply 18mm TR/4 330x240 427
727060 EFD Paint white 1l 428 745341 Fin-Ply 18mm TR/4 330x120 427
727061 EFD Paint white 5l 428 745342 Fin-Ply 18mm TR/4 330x 90 427
727112 Drill Bit HSS DIN 338, Ø 5.1 mm 428 745343 Fin-Ply 18mm TR/4 330x 72 427
727165 Pactan Joint Seal, brown 310 ccm 426 745344 Fin-Ply 18mm TR/4 330x 60 427
730050 Rivet DIN 7337 B 5x30, Alu 402 745345 Fin-Ply 18mm TR/4 330x 30 427
740251 Fin-Ply 18mm TR 270x120 427 745346 Fin-Ply 18mm TE/4 330, right 427
740252 Fin-Ply 18mm TR, TRA 270x 90 427 745347 Fin-Ply 18mm TE/4 330, left 427
740255 Fin-Ply 18mm TR, TRA, THP 270x 60 427 745348 Fin-Ply 18mm TRM/4 330x72 l=383mm 427
740256 Fin-Ply 18mm TR 270x 72 427 745349 Fin-Ply 18mm TRM/4 330x72 l=531mm 427
740257 Fin-Ply 18mm TR, TRA 270x 30 427 750040 Spring 4.6x18x1338 mm 426
740270 Fin-Ply 18mm TRM 270x72 l=1481mm 427 750076 F.H. Bolt DIN 603 M 8x90 w.N, galv. 270
740271 Fin-Ply 18mm TRM+TAM 270/330 l=513mm 427 750132 Sleeve 18 - DW 20, Base Piece 426
740273 Fin-Ply 18mm TRM 120x72 l=286mm 427 750133 Sleeve 18 - DW 20, Head Piece 426
740275 Fin-Ply 18mm TR 120x120 427 750134 Plastic Sleeve Corner DW 20 426
740276 Fin-Ply 18mm TR 120x 90, TRA 90x120 427 750135 Plastic Sleeve DW 20 426
740277 Fin-Ply 18mm TR 120x 72 427 750303 Stacking Aid TRIO DW 20 65
740278 Fin-Ply 18mm TR 120x 60 427 750330 Hex. Bolt ISO 4014 M12x100-8.8, galv. 400
740279 Fin-Ply 18mm TR 120x 30 427 750343 Kicker TRP 118 74
740280 Fin-Ply 18mm TRM 120, TAM 90x72 l=740mm 427 750350 Washer ISO 7093-1 200 HV A 12, galv. 402
740284 Fin-Ply 18mm TR 60x 90, TRA 90x 60 427 780155 Hex. Bolt ISO 4014 M16x160-8.8, galv. 400
740285 Fin-Ply 18mm TR 60x 72 427 780302 Rivet DIN 7337 B 5x25, Alu 402
740286 Fin-Ply 18mm TR/THP 60x60 427 780304 Rivet DIN 7337 A 5x12, Alu 402
740287 Fin-Ply 18mm TR 60x 30 427 780305 Rivet DIN 7337 B 5x20, GAV 402
740308 Fin-Ply 18mm TRS 270x 90 427 780353 Hex. Bolt ISO 4016 M 8x 25-4.6 w.N, galv. 401
740309 Fin-Ply 18mm TRS 120x 90 427 780354 Washer ISO 7089-200 HV A 8, galv. 402
740310 Fin-Ply 18mm TRS 60x 90 427 780356 Hex. Nut ISO 7042 M10-8, galv. 401
740322 Fin-Ply 18mm TR/4 330x 24 427 780357 Hex. Bolt ISO 4017 M 20x 50-8.8, galv. 400
740323 Fin-Ply 18mm TR 270x 24 427 780702 Washer ISO 7089-200 HV A 12, galv. 402
740324 Fin-Ply 18mm TR 120x 24 427 781053 Hex. Nut ISO 7042 M20-8, galv. 401
740454 Fin-Ply Combi 15mm D 250x100 429
740455 Fin-Ply Combi 15mm D 250x 75 429
740456 Fin-Ply Combi 15mm D 250x 50 429
740457 Fin-Ply Combi 15mm D 250x 25 429
740458 Fin-Ply Combi 15mm D 125x100 429
740459 Fin-Ply Combi 15mm D 125x 75 429
740460 Fin-Ply Combi 15mm D 125x 50 429
740461 Fin-Ply Combi 15mm D 125x 25 429
740462 Fin-Ply Combi 15mm D 75x100 429
740463 Fin-Ply Combi 15mm D 75x 75 429
740464 Fin-Ply Combi 15mm D 75x 50 429
740465 Fin-Ply 15mm D 75x25 429
740467 Fin-Ply Combi 15mm DM 250x 75 429
740468 Fin-Ply Combi 15mm DM 125x 75 429
740469 Fin-Ply Combi 15mm DM 75x 75 429
740497 Fin-Ply 15mm D 250x40 429
740498 Fin-Ply 15mm D 250x35 429
740499 Fin-Ply 15mm D 250x30 429
740522 Fin-Ply 15mm D 250x20 429
740523 Fin-Ply 15mm D 125x40 429
740524 Fin-Ply 15mm D 125x35 429
740525 Fin-Ply 15mm D 125x30 429

486
 PERI International

1 PERI GmbH
Rudolf-Diesel-Strasse
89264 Weissenhorn 43
Phone 07309/950-0
Telefax 07309/951-0 20 22 19
[email protected]
www.peri.de

33

35
45
18
39

53
11
11
21
6
47
17
5 1 31

16
3 13 29
2
30
54
49
9 42

4 12
34
24

2 France 7 USA 12 Turkey 16 Austria 21 Poland

PERI S.A.S. PERI Formwork Systems, Inc. PERI Kalıp ve İskeleleri PERI Ges.mbH PERI Polska Sp. z o.o.
Zone Industrielle Nord Suite 200 San. Tic. Ltd. Sti. Industriegelände 152 ul. Stołeczna 62
34-36 rue des Frères Lumière 7272 Park Circle Drive Çakmaklı Köyü Karşısı Postfach 1 05-860 Płochocin
77109 Meaux Cedex Hanover, MD 21076 Sanbir Bl. 4.Bölge 9.Cadde No: 133 3131 Getzersdorf Tel.: ++ 48 / 22 / 72 17 400
Tel.: ++33 /1/ 64 35 24 40 Tel.: ++1 /4 10/ 7 12-72 25 Büyükçekmece / Istanbul Tel.: ++43 / 27 83 / 41 19 Fax: ++ 48 / 22 / 72 17 401
Fax: ++33 /1/ 64 35 24 50 Fax: ++1 /4 10/ 7 12-70 80 Tel.: ++90 /2 12/ 8 86 74 01(02)-(09) Fax: ++43 /27 83/ 41 19-20 [email protected]
[email protected] [email protected] Fax: ++ 90 / 2 12 / 8 86 74 15 [email protected] www.peri.pl.pl
www.peri.fr www.peri-usa.com [email protected] www.peri.at
www.peri.com.tr 22 Sweden
3 Switzerland 8 Indonesia 17 Czech Republic PERIform SVERIGE AB
PERI AG PT Beton Perkasa Wijaksana 13 Hungary PERI spol. s r.o. Montörgatan 4-6
Aspstraße 17 P.O. Box 3737 PERI Kft. P.O. Box 3 Box 9073
8472 Ohringen Jakarta 10210 Zádor u. 4. 252 42 Jesenice / Prahy 30013 Halmstad
Tel.: ++41 /52/ 3 20 03 03 Tel.: ++62 /21/ 5 71 26 44 1181 Budapest Tel.: ++420 /241 090 311 Tel.: ++ 46 / 35 / 17 46 60
Fax: ++41 /52/ 3 35 37 61 Fax: ++62 /21/ 5 73 85 64 Tel.: ++ 36 /1/ 2 960 960 Fax: ++420 /241 090 315 Fax: ++ 46 / 35 / 17 46 78
[email protected] [email protected] Fax: ++ 36 /1/ 2 960 950 [email protected] [email protected]
www.peri.ch [email protected] www.peri.cz www.periform.se
9 Italy www.peri.hu
4 Spain PERI S.p.A. 18 Denmark 23 Korea
PERI S.A. Sociedad Unipersonal Via G. Pascoli, 4 14 Malaysia PERI DANMARK A/S PERI (Korea) Ltd.
Ctra. Paracuellos - Fuente el Saz km. 18,9 20060 Basiano (MI) PERI-HORY MALAYSIA forskalling og stillads 9thFl., Yuseong Bldg.
Camino de Malatones, km. 0,5 Tel.: ++39 /02/ 9 50 78-1> Formwork SDN.BHD. Greve Main 26 830-67 Yeoksam-dong,
28110 Algete / Madrid Fax: ++39 /02/ 95 76 19 14 Unit 19-04-7, Level 7 2670 Greve Kangnam-ku,
Tel.: ++ 34 / 91 / 6 20 48 00 [email protected] PNB Damansara Tel.: ++ 45 / 43 / 45 36 27 Seoul 135-080
Fax: ++ 34 / 91 / 6 20 48 01 www.peri.it 19 Lorong Dungun Fax: ++ 45 / 43 / 45 36 87 Tel.: ++ 82 / 2 / 5 50 22 00
[email protected] Damansara Heights [email protected] Fax: ++ 82 / 2 / 5 57 53 82
www.peri.es 10 Japan 50490 Kuala Lumpur www.peri.dk [email protected]
Hory Corporation Tel.: + 60 / 3 / 20 93 68 23 www.perikorea.com
5 Belgium /Luxemburg 11-17 Fuyuki, Kohtoh-Ku Fax: + 60 / 3 / 20 92 58 76 19 Finland
N.V. PERI S.A. Ishima Bldg., 9F [email protected] PERI Suomi Ltd. Oy 24 Portugal
Industriepark Tokyo 135-0041 www.perimalaysia.com Periäistentie 61 PERIcofragens Lda.
Nijverheidsstraat 6 PB 54 Tel.: ++81 /3/ 38 20 88 71 05200 Rajamäki Rua Cesário Verde, nº 5 - 3º Piso
1840 Londerzeel Fax: ++81 /3/ 56 21 70 24 15 Singapore Tel.: ++358 /9/ 27 66 06-0 Linda-a-Pastora
Tel.: ++32 /52/ 31 99 31 [email protected] PERI-HORY ASIA Fax: ++358 /9/ 27 66 06-66 2790-326 QUEIJAS
Fax: ++32 /52/ 30 08 30 Formwork Pte. Ltd. [email protected] Tel.: ++3 51 /21/ 4 25 38 90
[email protected] 11 United Kingdom/Irland No. 1 Sims Lane # 06-10 www.perisuomi.fi Fax: ++3 51 /21/ 4 25 39 46
www.peri.be PERI Ltd. Singapore 387355 [email protected]
Market Harborough Road Tel.: ++ 65 / 67 44 29 89 20 Norway www.peri.pt
6 Netherlands Clifton upon Dunsmore Fax: ++ 65 / 67 44 36 93 PERI NORGE AS
PERI B.V. Rugby, CV23 0AN [email protected] Industrigata 11 25 Argentina
v. Leeuwenhoekweg 23 Tel.: ++44 /17 88/ 86 16 00 www.periasia.com 3400 Lier PERI S.A.
Postbus 304 Fax: ++44 /17 88/ 86 16 10 Tel.: ++ 47 / 32/ 24 17 00 Ruta Nacional No. 9, km 47,5
5480 AH-Schijndel [email protected] Fax: ++ 47 / 32/ 24 17 01 (Panamericana Ramal Escobar)
Tel.: ++31 /73/ 5 47 91 00 www.peri.ltd.uk [email protected] (1625) Escobar / Prov. Bs. As.
Fax: ++31 /73/ 5 49 36 51 www.peri.no Tel.: ++ 54 / 34 88 / 42 81 00
[email protected] Fax: ++ 54 / 34 88 / 42 30 21
www.peri.nl [email protected]
www.peri.com.ar

494
 45
37
53
44

51 52
7
23 10
38
40 41
48
50 36

28

14
15

8
26

46 32
27 25

26 Brazil 31 Slovakia 36 United Arab Emirates 41 Israel 46 South Africa 51 Azerbaijan

PERI Formas e PERI spol. s r.o. PERI (L.L.C.) PERI Formwork PERI Wiehahn (Pty.) Ltd. PERI BAKU
Escoramentos Ltda. Pribylinská 10 Brashy Building, Office No. 212 Engineering Ltd. P.O. Box 2668 Baku Branch Office
Passagem Abaré, 1.502 831 04 Bratislava Shk. Zayed Road 16 Moshe Dayan st. Bellville 7535 Mehdi Hüseyn 71/9
06300-000 Carapicuíba Tel.: ++421 /2/ 4 92 09-1 11 P.O. Box 27933 P.O. Box 10202 Tel.: ++ 27 / 21 / 9 05 18 15 Baku / Aserbaidschan
São Paulo Fax: ++421 /2/ 4 92 09-1 10 Dubai Kiriat Arie Fax: ++ 27 / 21 / 9 05 47 07 Tel : + 994 12 97 64 24
Tel.: ++55 /11/ 41 86 10 41 [email protected] Tel.: ++ 971 / 4 / 3 39 44 94 Petach Tikva 49002 [email protected] Fax : + 994 12 92 45 51
Fax: ++55 /11/ 41 86 10 41 www.peri.sk Fax: ++ 971 / 4 / 3 39 44 34 Tel.: ++ 972 / 3 / 9 24 93 32 www.periwiehahn.co.za [email protected]
[email protected] [email protected] Fax: ++ 972 / 3 / 9 24 93 31
www.peribrasil.com.br 32 Australia www.perime.com [email protected] 47 Ukraine 52 Turkmenistan
PERI Australia Pty. Ltd. www.peri-il.com TOW PERI Ukraina PERI Kalp ve İskeleleri
27 Chile 116 Glendenning Road 37 Canada 23, M. Raskowoj Str. Aşgabat Branch Office
PERI Chile Ltda. Glendenning NSW 2761 PERI Formwork Systems, Inc. 42 Bulgaria 02002 Kiev Oguzhan Köçesi No: 112 Kat:3
C /José de San Martin 104 Tel.: ++61 /2/ 88 05 23 00 45 Nixon Road PERI BULGARIA EOOD Tel.: ++380 /44/ 5 68 53 57 Aşgabat
Parque Industrial Los Libertadores Fax: ++61 /2/ 96 75 72 77 Bolton, Ontario Kv. Vragdebna Fax: ++380 /44/ 5 68 51 45 Tel : +993 12 45 66-83/84
Colina, Santiago de Chile [email protected] L7E 1K1 m. Nova Machala Nr. 46 [email protected] Fax : +993 12 45 23 50
Tel.: ++56 /2/ 4 44 60 00 www.periaus.com.au Tel.: ++ 1 / 9 05 / 9 51 54 00 1839 – Sofia, Bulgarien www.peri.com.ua [email protected]
Fax: ++56 /2/ 4 44 60 01 Fax: ++ 1 / 9 05 / 9 51 54 54 Tel.: ++3 59 /2/ 8 14 40 40-45
[email protected] 33 Estonia [email protected] Fax: ++3 59 /2/ 8 14 40 50 48 Egypt 53 Belarus
www.peri.cl PERI AS www.peri.ca [email protected] PERI GmbH PERI GmbH
Valdmäe 8 www.peri.bg Egypt Branch Office Gikalostr. 3
28 Philippines Tänassilma Tehnopark 38 Lebanon 24 A, Obour Gardens, Büro 413
PERI GmbH 76401 Saku vald PERI GmbH 43 Iceland 4th floor, apt. #1 220000 Minsk / Belarus
4-B Sycamore Center, Harjumaa Lebanon Representative Office Merkúr HF Salah Salem Street Tel : +3 75 / 1 72 / 84 72 38
Alabang-Zapote Road Tel.: + 3 72 / 6 / 77 11 00 AYA Commercial Center, 7th Fl, Akralind 2 11361 Heliopolis / Kairo Fax: +3 75 / 1 72 / 84 72 38
Corner Buencamino Street, Fax: + 3 72 / 6 / 77 11 22 Dora Highway 201 Kópavogi Tel.: ++20 /2/ 4 04 85 24/26 [email protected]
Alabang Muntinlupa [email protected] P.O box: 90 416-Jdeideh Tel.: ++ 354 / 5 94 60 00 Fax: ++ 20 / 2 / 4 04 57 84
Metro Manila www.peri.ee Beirut - Lebanon Fax: ++ 354 / 5 94 60 01 [email protected] 54 Croatia
Tel.: ++63 /2/ 8 09 34-01 (02) (03) Tel: ++ 961 / 1 24 33 65 [email protected] PERI Oplate i Skele d.o.o.
Fax: ++63 /2/ 8 09 17 68 34 Greece Fax: ++ 961 / 1 24 33 67 www.merkur.is 49 Serbia / Montenegro Dolenica 20
[email protected] PERI Hellas Ltd. Mob: ++ 961 / 3 73 73 67 PERI - Oplate d.o.o. 10 250 Zagreb/Donji Stupnik
Sokratous Str. [email protected] 44 Kazakhstan Jurija Gagarina 81 Tel : +3 85 /1/ 6 55 36 36
29 Romania 5th kil. Koropi-Varis Ave. [email protected] PERI Kalip ve Iskeleleri 11070 Novi Beograd Fax: +3 85 /1/ 6 55 36 37
PERI România SRL P. O. Box 407 Almaty Branch Office Tel.: +3 81/ 11/ 2 15 31-48 /-49 [email protected]
Calea Bucureşti nr. 2B 194 00 Koropi 39 Lithuania Furmanova Straße, 65 Fax: +3 81/ 11 / 3 18 59 62 www.peri.de
077015 Baloteşti - ILFOV Tel.: ++30 /210/ 66 20 895-8 PERI UAB Büro 412 Corner Makataeva [email protected]
Tel.: ++40 /21/ 2 66 24-19 (21) Fax: ++30 /210/ 66 28 416 Titnago st. 19 480004, Alma Ata www.peri.co.yu
Fax: ++40 /21/ 2 66 24 20 [email protected] 2053 Vilnius Tel.: ++ 7 / 32 72 / 73 00 72
[email protected] www.perihellas.gr Tel.: ++ 370 / 5 / 2 31 14 54 Fax: ++ 7 / 32 72 / 73 91 16 50 Mexico
www.peri.ro Fax: ++ 370 / 5 / 2 32 19 66 [email protected] PERI Cimbras y Andamios,
35 Latvia [email protected] www.peri.com.tr S.A. de C.V.
30 Slovenia PERI SIA www.peri.lt Cerrada de Tejocotes, Lote
Goran Opaliã s. p. Granita 26 45 Russian Federation 4, Bodega A
technologije in storitve 1057 Riga 40 Morocco PERI GmbH Fracc. San Martin Obispo
Obrežna 137 Tel.: ++371 / 7 13 41 11 PERI S.A. Krasnopresnenskaja C.P.54763 Cuautitlán Izcalli
2000 Maribor Fax: ++371 / 7 13 41 15 Route de Rabat, km. 5 Naberezhnaja 12 Estado de México
Tel.: ++386 /2/ 4 21 52 40 [email protected] Piste de Beni Touzine Hotel Mezhdunarodnaja 2 - Nr. 408 Tel.: ++ 52 / 55 / 58 87 72 30
Fax: ++386 /2/ 4 21 52 41 www.peri-latvija.lv Tanger 123610 Moskau Fax: ++ 52 / 55 / 58 87 71 09
Tel.: ++ 212 / 39 31 75 48 Tel.: ++7 / 0 95/ 2 58 23 49 [email protected]
Fax: ++ 212 / 39 31 75 49 Fax: ++7/ 0 95/ 2 58 23 50 www.peri.com.mx
[email protected] [email protected]
www.peri.ru 495
 Component Catalogue Formwork

Component Catalogue Formwork

© Copyright by PERI GmbH
e 08/2005 10ma Art.Nr.: 791916

PERI GmbH
P. O. Box 12 64
89259 Weissenhorn
Tel.: 0 73 09 / 9 50-0
Fax: 0 73 09 / 9 51-0
[email protected]
www.peri.de
D