Scribd
Upload
59 views1 page

The Ping Utility: Syntax

This document discusses several network communication utilities in Unix, including the ping utility. The ping command sends an echo request to a host on the network to check if it is responding. It is useful for tracking hardware and software problems, determining network status, and testing/managing networks. The syntax is simple, using the ping command followed by a hostname or IP address. An example shows pinging google.com and receiving response times and packet loss statistics.

Uploaded by

rahul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
59 views1 page

The Ping Utility: Syntax

This document discusses several network communication utilities in Unix, including the ping utility. The ping command sends an echo request to a host on the network to check if it is responding. It is useful for tracking hardware and software problems, determining network status, and testing/managing networks. The syntax is simple, using the ping command followed by a hostname or IP address. An example shows pinging google.com and receiving response times and packet loss statistics.

Uploaded by

rahul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

n this chapter, we will discuss in detail about network communication utilities in

Unix. When you work in a distributed environment, you need to communicate with
remote users and you also need to access remote Unix machines.
There are several Unix utilities that help users compute in a networked, distributed
environment. This chapter lists a few of them.

The ping Utility


The ping command sends an echo request to a host available on the network.
Using this command, you can check if your remote host is responding well or not.
The ping command is useful for the following −

 Tracking and isolating hardware and software problems.


 Determining the status of the network and various foreign hosts.
 Testing, measuring, and managing networks.

Syntax

Following is the simple syntax to use the ftp command −


$ping hostname or ip-address
The above command starts printing a response after every second. To come out of
the command, you can terminate it by pressing CNTRL + C keys.

Example

Following is an example to check the availability of a host available on the network


−
$ping google.com
PING google.com (74.125.67.100) 56(84) bytes of data.
64 bytes from 74.125.67.100: icmp_seq = 1 ttl = 54 time = 39.4 ms
64 bytes from 74.125.67.100: icmp_seq = 2 ttl = 54 time = 39.9 ms
64 bytes from 74.125.67.100: icmp_seq = 3 ttl = 54 time = 39.3 ms
64 bytes from 74.125.67.100: icmp_seq = 4 ttl = 54 time = 39.1 ms
64 bytes from 74.125.67.100: icmp_seq = 5 ttl = 54 time = 38.8 ms
--- google.com ping statistics ---
22 packets transmitted, 22 received, 0% packet loss, time 21017ms
rtt min/avg/max/mdev = 38.867/39.334/39.900/0.396 ms
$
If a host does not exist, you will receive the following output −
$ping giiiiiigle.com
ping: unknown host giiiiigle.com
$

You might also like