0% found this document useful (0 votes)
80 views10 pages

Mix Design For Concrete Grade M 25

The document provides a mix design for M25 grade concrete. It specifies a characteristic compressive strength of 25 N/mm2, maximum aggregate size of 20 mm, workability of 0.8, and exposure of mild. Materials specified include PPC cement, fine aggregate with 2.1% water absorption, coarse aggregate with 0.78% water absorption, and a water-cement ratio of 0.44. The mix design calculates 422.73 kg of cement, 565.72 kg of fine aggregate, 709.71 kg of 20 mm coarse aggregate, 473.14 kg of 10 mm coarse aggregate, and 183.63 ltrs of water to make 1 cubic meter of concrete.

Uploaded by

Sushmit Katkale
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
80 views10 pages

Mix Design For Concrete Grade M 25

The document provides a mix design for M25 grade concrete. It specifies a characteristic compressive strength of 25 N/mm2, maximum aggregate size of 20 mm, workability of 0.8, and exposure of mild. Materials specified include PPC cement, fine aggregate with 2.1% water absorption, coarse aggregate with 0.78% water absorption, and a water-cement ratio of 0.44. The mix design calculates 422.73 kg of cement, 565.72 kg of fine aggregate, 709.71 kg of 20 mm coarse aggregate, 473.14 kg of 10 mm coarse aggregate, and 183.63 ltrs of water to make 1 cubic meter of concrete.

Uploaded by

Sushmit Katkale
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 10

Mix Design for Concrete Grade = M 25

C1.Design stipulation:
i Characteristic Compressive strength = 25 N/mm2
ii Maximum size of aggregate = 20 mm
iii Degree of workability = 0.8
iv Degree of quality = Good
v Type of Exposure = Mild

C2. Test data for materials


(i) Cement used = PPC
(ii) Specific gravity of Cement = 3
(iii) Specific gravity
Fine Aggregate = 2.8
Coarse Aggregate = 2.61
(iv) Water absorption
Fine Aggregate = 2.1 %
Coarse Aggregate = 0.78 %
(v) Free Surface Moisture
Fine Aggregate = 2.1 %
Coarse Aggregate
Fine Aggregate confirming the table 4, IS = Nil %
(vi) 383- Zone = 3 Zone

C3.Target mean strength


= 31.60 N/mm2

C4. Selection of Water Cement ratio


Water Cement ratio = 0.44 (From fig. 1, Is 10262)

C7. Determination of Fine & Coarse aggregate


Air entrapped in concrete = 2 % (From Table 3, IS 10262)
Actual quantity of concrete "V" = 0.98 Cum
Materials required for concrete
Grade M 25
Concrete quantity = 1 Cum
Sl.
Material name Quantity Unit
No

1 Cement 422.73 kg
2 Fine Aggregate 565.72 kg
3 Coarse Aggregate 20mm 709.71 kg
4 Coarse Aggregate 10mm 473.14 kg
5 Water 183.63 ltr
6 Slump 75 - 100 mm
7 W/C ratio 0.44
Prepared by,

Sathiyaseelan
+91 8894770272
Grade Std. Deviation w/c Strength w/c Strength

0.42 48 0.49 29
M20 4 26.56 0.43 45 0.50 26
M25 31.56 0.44 43 0.51 25
M30 5 38.20 0.45 40 0.52 24
M35 43.20 0.46 38 0.53 23
M40 48.20 0.47 33 0.54 22
M45 53.20 0.48 31 0.55 21

Nominal w/c=0.60
max. Water
Sand Content
Size of Content
aggregate
10 208 40
20 186 35
40 165 30

Adjusted Required in
Change in Condition % of Sand
Water Content
For Sand Content
Cofirming
to grading
Zone 1
zone- I, 0 zone 3 -3
II, or IV of
IS : 383-
Zone 4
Increase
1970
in
Compacti 3
on
Each 0.05
Factor
increase
or
Decrease -2.4
in free w/c
ratio(std=
Total
0.60) 3 -540.00%

1.2
1
0.8
xis Title

0.6
1.2
1
0.8

Axis Title
0.6
0.4
0.2
0
1
Name Sushmit Katkale
Roll No. 301B031
Concrete Mix Des

1) Design Grade = 45
2) Target Mean Strength

3) W/C Ratio = 0.48

4) Maximun Size of Aggregate

5) Water Content per Cubic metre of Concrete

6) Sand Content per Cubic metre of Concrete

finenes Modulus

Sand Confirming Zone

Compaction Factor

7) Correction in water Content

8) Correction in Sand Content

9) Cement Content

10) Specific Gravity of Cement

11) Specific Gravity


1) Fine Aggregate
2) Coarse Aggregate

F.A 6.488 12) Moisture Content(%)


C.A #REF! 1) Fine Aggregate
2) Coarse Aggregate

F.A 10.38 13) Water absorption(%)


C.A #REF! 1) Fine Aggregate
2) Coarse Aggregate

14) Estimated Air Contain(%)


v 980
(c/Sc) 126.706349206349 15) Volume of Concretem^3)
1/P 3.37837837837838
1/Fa 0.377358490566038
16)) Quantity of Fine Aggregate

17) Quantity of Coarse Aggregate

18) Correction in Qty. of Fine Aggregate

19) Correction in Qty. of coarse Aggregate

20) Correction in Qty. of Water

Sr. No: Material Name


1 Cement Content
2 Water
Fine Aggregate
1) White Sand
3
2) Black Sand
Coarse Aggregate
4 1) Coarse Aggregate(20mm)
2) Coarse Aggregate(10mm Grit)
Slum of Concrete
ete Mix Design You can change this values
Exel Generated values

= 0

= 20

metre of Concrete = 186

etre of Concrete = 35

= 3.5

= 4

0.9

= 191.58

= 2960.00%

= 399.13

= 3.15

= 2.65
= 3.07

Mix Proportions By mass


= 1.25
= 0.85 Water Cement
#REF! 399
0.48 1
= 2
= 0.65

Quantities For 1 Bag of Cement


= 2
Water Cement
= 1 24.0 50

= 519.05 Kg
Quantity for 9 Cube
= #REF! Kg
Water Cement
= 525.54 Kg 8.0 17

e Aggregate = #REF! Kg

= #REF! Litre

Name Quantity(Kg)
ontent 399
r #REF!
egate 526
Sand
263
Sand 263
gregate #REF!
gate(20mm) #REF!
te(10mm Grit) #REF!
oncrete 50-100
ortions By mass
F.A C.A
526 #REF!
1.32 #REF!

r 1 Bag of Cement

F.A C.A
66 #REF!

y for 9 Cube

F.A C.A
22 #REF!

You might also like