Downloaded from www.Manualslib.

com manuals search engine

 Precautions

IMPORTANT

The lightning flash with arrowhead symbol, within CAUTION : TO PREVENT THE RISK OF The exclamation point within an
an equilateral triangle, is intended to alert the user ELECTRIC SHOCK, DO NOT REMOVE equilateral triangle is intended to alert
to the presence of uninsulated dangerous voltage COVER (OR BACK). NO USER the user to the presence fo important-
within the product's enclosure that may be of SERVICEABLE PARTS INSIDE. REFER operating and maintenance(servicing)
sufficient magnitude to constitute a risk of electric SERVICING TO QUALIFIED SERVICE instructions in the literature
shock to persons. PERSONNEL. accompanying the appliance.

These labels can be found on the unit's rear panel. Ces étiquelttes se trousent sur le fond de Pappareil.

Note : This equipment has been tested and found to comply with the limits for a Class CAUTION
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to This product satisfies FCC regulations when shielded cables
provide reasonable protection against harmful interference in a residential installation. and connectors are used to connect the unit to other
This equipment generates, uses and can radiate radio frequency energy and, if not equipment. To prevent electromagnetic interference with
installed and used in accordance with the instructions, may cause harmful interference electric appliances such as radios and televisions, use
to radio communications. However, there is no guarantee that interference will not shielded cables and connectors for connections.
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures: CAUTION
- Reorient or relocate the receiving antenna. • Use of controls or adjustments or performance of procedures
- Increase the separation between the equipment and receiver. other than those specified here may result in hazardous
- Connect the equipment into an outlet on a circuit different from that to which the radiation exposure.
receiver is connected. • The use of Optical instruments with this product will
- Consult the dealer or an experienced radio/TV technician for help. increase eye hazard.

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

CAUTION CAUTION : LASER RADIATION WHEN OPEN.

AVOID EXPOSURE TO BEAM.
This product contains a laser diode of higher class than 1. To ensure continued safety, VORSICHT : LASERS TRAHLUNG, WENN ABDECKUNG
do not remove any covers or attempt to repair. Refer all servicing to qualified GEÖFFENT NIICHT DEM STRALHL
personnel. AUSSETZEN!
The following caution appears on rear of the unit. ADVARSEL : LASERSTRÄLING VED ÃBNING UNDGÃ
UDSÆ TTEL SE FOR STRÃLING.
VARNING : LASERSTRÃL NING NÃR DENNA DEL ÃR
ÖPPNAD BETRAKTA EJ STRÃLEN.
VARO! : AVATTAESSA ALTISTUT LASERSÃTBL
YLLE ÃLÃ KATSO SÃTEESEN

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID

This product is in conformity with the EMC directive
CAUTION EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON LASER
and low-voltage directive.
COVERSHIELD)
This product incorporates copyright protection technology that is protected by method claims of certain U.S Patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be Authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.
Product label concerning product safety standard is pasted in the middle of bottom cover of recorder.

2 Precautions

Downloaded from www.Manualslib.com manuals search engine

 Important Safety
Instructions

• READ THESE INSTRUCTIONS - All the safety • VENTILATION - Do not block any of the
and operating instructions should be read before ventilation openings. Install in accordance with the
the product is operated. manufacturer's instructions.
• KEEP THESE INSTRUCTIONS - The safety and • GROUNDING OR POLARIZATION - Do not
operating instructions should be retained for defeat the safety purpose of the polarized or
future reference. grounding type plug. A polarized plug has two
• HEED ALL WARNINGS - All warnings on the blades with one wider than the other. A grounding
product and in the operating instructions should type plug has two blades and a third grounding
be adhered to. prong. The wide blade or the third prong is
provided for your safety. When the provided plug
• FOLLOW ALL INSTRUCTIONS - All operating does not fit into your oulet, consult an electrician
and use instructions should be followed. for replacement of the obsolete outlet.
• CLEAN ONLY WITH A DAMP CLOTH - Unplug • POWER-CORD PROTECTION - Protect the
this product from the wall outlet before cleaning. power cord from being walked on or pinched
The product should be cleaned only with a particularly at plugs, convenience receptacles,
polishing cloth or a soft dry cloth. Never clean with and the point where they exit from the apparatus.
furniture wax, benzene secticides or other volatile
liquids since they may corrode the cabinet. • LIGHTNING - Unplug this apparatus during
lightning storms or when unused for long periods
• DO NOT USE THIS APPRATUS NEAR WATER of time.
- Do not use this product near water - for
example, near a bathtub, wash bowl, kitchen sink, • SERVICING - Refer all servicing to qualified
or laundry tub; in a wet basement; or near a service personnel. Servicing is required when the
swimming pool; and the like. apparatus has been damaged in any way, such
as power supply cord or plug is damaged, liquid
• ACCESSORIES - Only use the has been spilled over, objects have fallen into the
attachments/accessories specified by the apparatus, the apparatus has been exposed to
manufacturer. rain or moisture, does not operate normally, or
• CART - Use only with a cart, stand, has been dropped.
bracket, or table specified by the • HEAT - Do not install near any heat sources such
manufacturer, or sold with the as radiators, heat registers, stoves, or other
apparatus. When a cart is used, apparatus(including amplifiers) that produce heat.
use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.

Important Safety Instructions 3

Downloaded from www.Manualslib.com manuals search engine
 Table of Contents

Slow Forward ......................................................... 22

Before You Start Frame by Frame Playback
What’s in the box................................................... 6 (DVD/VCD only)................................................. 22
Putting the batteries in the remote control ..... 6 Program Playback (Audio CD only)................. 23
Using the remote control..................................... 6 Selecting Subtitles (DVD only) .......................... 24
Compatible Discs .................................................. 7 Selecting Audio Languages (DVD only)......... 24
Repeating a Title, Chapter
(DVD/Audio CD only) ....................................... 25
Controls & Display A-B Repeat (DVD/Audio CD only) ................... 25
Front Panel ............................................................. 8 ZOOM screen (DVD/HDD only) ....................... 26
Display...................................................................... 9 Switching the Camera Angle (DVD only)....... 26
Rear Panel .............................................................. 10 Direct Search (DVD only) ................................... 27
Remote Controller Unit ........................................ 11
Recording
Connection Basic recording ...................................................... 28
OTR (One touch Timer Recording) ................. 28
Connection for Video Output Terminals ......... 14
Timer Recording.................................................... 29
Connection for Audio Output Terminals ......... 15
Timer review - changing and erasing record
Connection for A/V Input Terminals ................ 15
settings ................................................................. 30
Connection for DV IN and USB IN................... 16
Recording from a DV (Digital Video)
Connection for HDMI Output ............................. 16
camcorder ............................................................ 31
Time Shifted Recording....................................... 31
Getting started Simultaneous recording and playback ........... 32

Turning on and off................................................. 17

Selecting the HDD or DVD for playback and Copying
recording .............................................................. 17
Displaying the disc information on screen Copying the DVD titles from Disc to HDD ..... 33
(OSD) .................................................................... 17 Copying the titles from HDD to Disc................ 34
Copying the files from disc to HDD
(from HDD to Disc)............................................ 34
Basic Playback Copying the files from the USB flash
memory to HDD (or disc) ................................ 35
Playing a DVD disc............................................... 18
Playing a DVD±RW or DVD±R disc ................ 18
Playing an Audio CD ............................................ 18 Editing
Playing a JPEG CD .............................................. 19
Playing MPEG-4 Movie CD ............................... 19 Editing a DVD±RW or DVD±R disc
Playing a program of HDD ................................. 20 Play disc (DVD±RW/DVD±R) ........................... 37
Playing a JPEG in HDD ...................................... 20 Rename disc (DVD±RW/DVD±R) ................... 37
Playing MPEG-4 Movie in HDD........................ 21 Erase optical disc (DVD±RW only) .................. 38
Overwrite disc (DVD±RW only) ........................ 38
Finalize disc (DVD±R only) ................................ 39
Advanced Playback Lock disc (DVD±RW only).................................. 39
Copy All (DVD±RW/DVD±R)............................. 39
Fast Forward/Backward ...................................... 22
Skip Forward/Backward ...................................... 22

4 Table of Contents

Downloaded from www.Manualslib.com manuals search engine

 Table of Contents

Editing a title of DVD±RW or DVD±R

Play title (DVD±RW/DVD±R)............................. 40
Using the Setup Menu
Edit title (DVD±RW/DVD±R).............................. 40 Basic Operations ................................................... 47
Rename title (DVD±RW/DVD±R) .................... 41 Record & Channel Scan ..................................... 47
Erase title (DVD±RW only)................................. 42 Video......................................................................... 50
Overwrite title (DVD±RW only) ......................... 42 Audio......................................................................... 51
Append title (DVD±RW/DVD±R) ...................... 43 Language ................................................................ 51
Copy title (DVD±RW/DVD±R) ........................... 43 Clock ......................................................................... 52
Editing the title of HDD General .................................................................... 52
Play ........................................................................... 44 HDD .......................................................................... 54
Delete ....................................................................... 44
Split ........................................................................... 44
Segment .................................................................. 45 Additional Information
Combine .................................................................. 45 Specifications ......................................................... 55
Change Index Picture .......................................... 45 Troubleshooting..................................................... 56
Rename ................................................................... 45
Lock........................................................................... 46
Unlock....................................................................... 46
Protect ...................................................................... 46
Unprotect ................................................................. 46

Table of Contents 5
Downloaded from www.Manualslib.com manuals search engine
 Before You Start

What's in the box 2

Insert two AAA batteries into
the battery compartment
following the indications
Thank you for buying this product. Please confirm
(+, -) inside the
that the following accessories are in the box when
compartment.
you open it.

Accessories

3 Close the cover.

RF cable

Using the remote control

Audio/Video cable
Keep in mind the following when using the
remote control :
• Make sure that there are no obstacles between
Remote control the remote and the remote sensor on the unit.
• Remote operation may become unreliable if
AAA dry cell batteries strong sunlight or fluorescent light is shining on
the unit's remote sensor.
• Remote controllers for different devices can
interfere with each other. Avoid using remotes for
other equipment located close to this unit.
• Replace the batteries when you notice a fall off in
the operating range of the remote.
Operating instruction
Scart cable (this manual)
NOTE
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
• Don't mix new and old batteries together.
Putting the batteries in the remote • Don't use different kinds of batteries together-although
they may look similar, different batteries may have
control different voltages.
• Make sure that the plus and minus ends of each battery

1
Open the battery compartment match the indications in the battery compartment.
cover on the back of • Remove batteries from equipment that isn't going to be
used for a month or more.
the remote control.
• When disposing of used batteries, please comply with
governmental regulations or environmental public
instruction’s rules that apply in your country or area.

6 BEFROE YOU START

Downloaded from www.Manualslib.com manuals search engine

 Before You Start

Compatible Discs MPEG-4 CD compatibility

Any disc that displays one of the following logos • Also this can play MPEG-4
should play in this system. Other formats, including disc.
DVD-RAM, DVD-ROM, DVD-Audio, SACD and
CD-ROM will not play. JPEG CD compatibility
DVD Video compatibility • JPEG Photo in Discs.

• Single-sided or double-sided DVD Video regions

discs.
• Single layer or dual layer discs. All DVD Video discs carry a region mark on the
• Dolby Digital, DTS, MPEG or case somewhere that indicates which region of the
Linear PCM digital audio. world the disc is compatible with. Your DVD
• MPEG-2 digital video Discs are generally divided recorder also has a region mark, which you can
into one or more titles. Titles may be further find on the rear panel. Discs from incompatible
subdivided into chapters. regions will not play in this recorder. Discs marked
ALL will play in any player.
Audio CD compatibility
CAUTION
• 12cm or 8cm discs.
• Linear PCM digital audio. • If you record a disc using a personal computer, even if it
• CD-Audio, CD-R and CD-RW is recorded in a compatible format, there are cases in
which it may not play because of the settings of the
formatted CDs are divided into application software used to create the disc.
tracks.(This unit can play CD-R • Some of MPEG-4 movies could not be played depending
and CD-RW discs recorded in CD Audio or Video on the encoding methods.
CD format, or Kodak picture CD files.)

DVD-R/RW compatibility
• This unit can play DVD-R/
DVD-RW discs recorded as
DVD video format.
• Also this unit can record the
video and audio signal in
DVD-R/DVD-RW discs.

DVD+R/RW compatibility
• This unit can play DVD+R/
DVD+RW discs recorded as
DVD video format.

• Also this unit can record the

video and audio signal in
DVD+R/DVD+RW discs.

Before You Start 7

Downloaded from www.Manualslib.com manuals search engine
 Controls & Display

Front Panel

1 2 3 4 5 6

7 8 9

1 6
DISC TRAY DV IN
Put a disc to be played in here. Digital input jack for use with a digital video
camcorder. This jack is for connection to DV

2
FL DISPLAY camcorder only. It is not compatible with
Displays operation status. other digital equipments.

7
STANDBY/ON
3
OPEN/CLOSE
To open or close the disc tray. To switch the unit on or into Standby.

8
COMPOSITE VIDEO IN
4
JOG Button (PLAY/PAUSE ( )
ARROW ( )) Connect to Composite Video Output of
Press to start or pause a disc playing. camcorder.
And used to navigate or select an item of

9
menu. AUDIO IN
This button has also alternate functions as Connect to Audio Output of camcorder.
like Stop(Down), Previous(Left)
and Next(Right) Skip.

5
USB IN
Digital input jack for use with a digital
camera, USB memory.

8 Controls & Display

Downloaded from www.Manualslib.com manuals search engine

 Controls & Display

Display

1 2 3 4 5 6 7

8 9 10 11 12 13

1 8
TIMER Recording Indicator ROTATION
Lights when timer recording is on. Rotates when the disc is spinning.

2 9
ANGLE HDD Indicator
Indicates the current disc being played is Indicates the HDD mode.
viewed as multi angle.

10 Illuminates when the current play mode is

This function only works for discs having REPEAT Indicator
scenes recorded at different angles.
under repeat title, chapter, track, A-B

3
DOLBY DIGITAL Indicator respectively.
Indicates Dolby Digital 5.1CH playback.

11
DVD Indicator

4
TITLE Indicator Indicates the DVD mode.
Title number for DVD playback.

12
DTS Indicator

5
CHAPTER Indicator Illuminates when the format of digital audio
Chapter number for DVD playback. output is DTS.

6 13
BILINGUAL Indicator OPERATING Information
Illuminates when receiving a bilingual Indicates title, Chapter and Track number
broadcast. and Time, TV channel.

7
STEREO Indicator
Illuminates when receiving a stereo
broadcast.

Controls & Display 9

Downloaded from www.Manualslib.com manuals search engine
 Controls & Display

Rear Panel

1 2 3 4 5 6 7 8 9 10 11 12

1 7
AC POWER CORD AUDIO OUT
Connect to the wall outlet. Connect to Audio Input of TV.

2 8
DIGITAL AUDIO OUT HDMI OUT (576P)
Connect COAXIAL OUT to Digital Audio HDMI(High Definition Multimedia Interface)
Input (coaxial type) of Audio AMP. transfers the digital video and audio from
Or connect OPTICAL OUT to Digital Audio your DVD Recorder to your TV. Simply
Input (optical type) of Audio AMP. connect your DVD Recorder to your TV with
a single HDMI cable for the best picture and

3
COMPONENT VIDEO OUT sound.
Connect to Component Video Inputs of TV.

9
ANT IN

4
AUDIO IN Connect to external antenna.
Connect to Audio Output of VCR or Set-Top

10
Box. ANT OUT
Connect to Antenna Input of TV.

5
VIDEO IN

11
Connect VIDEO to Composite Video Output EURO AV OUT
of VCR or Set-Top Box. Connect to Euro AV input of TV.
Or connect S-VIDEO to S-Video Output of

12
VCR or Set-Top Box. EURO AV IN/OUT
Connect to Euro AV in/out of AV equipment

6
VIDEO OUT such as VCR, DVD player, etc.
Connect VIDEO to Composite Video Input of
TV or monitor.
Or connect S-VIDEO to S-Video Input of TV
or monitor.
S-Video provides better picture quality than
composite video.

10 Controls & Display

Downloaded from www.Manualslib.com manuals search engine

 Controls & Display

Remote Controller Unit A

A-B
To repeat a certain section during playback.
ADD/CLEAR
To remove the preset program on the timer
recording list.
To add or delete the track No. on the program
playback list of CD.
ANGLE
To view with a different frame angle.
ARROW ( )
To select an item of menu.
AUDIO
To select the audio language or audio channel
when playing a DVD disc.
You can also change the audio channel of the
broadcast.
• If the NICAM broadcast is bilingual, you can
select the language.

• If the NICAM broadcast is stereo, you can switch

between NICAM stereo and Mono audio.

AV IN
To select an external audio and video input to use
for recording.

C
CHANNEL DOWN/UP (-/+)
To select the preset TV channels.

Controls & Display 11

Downloaded from www.Manualslib.com manuals search engine
 Controls & Display

D O
DISPLAY OPEN /CLOSE ( )
To view the Title, Chapter, Track information or To open or close the disc tray.
Subtitle Language, Audio Language. If pressed under STANDBY, power is automatically
turned on.
DVD
To switch to DVD mode.
P
DV/USB
To select a digital A/V input from a DV camcorder PAUSE ( )
or USB flash memory. When you press this button during playback, you
can view the still picture.
E Each time you press this button, you can see one
frame at a time.
EDIT PLAY ( )
To edit a title or chapter of disc. To play the loaded disc or HDD.
ENTER PREV ( )
To select the menu item. To skip to the previous chapter or track.

F PROGRAM
To playback in a specific order.
FILE This button works only when the CD is played
To view the file list. (MPEG-4, MP3, JPEG files) back.

H R
REC (Record)
HDD/DUB
To start recording.
To switch to HDD mode.
To copy the titles from HDD to disc. REPEAT
To select a repeat mode.
M RETURN
To move to a previous menu. When using VCD 2.0
MENU
and SVCD with PBC function, this button works as
To display the contents menu of the loaded DVD a RETURN button.
disc.
MUTE S
To turn on/off audio outputs.
SCAN FWD ( )
N To start forward scanning during playback.

NEXT ( ) SCAN REV ( )

To skip to the next chapter or track. To start reverse scanning during playback.

NUMERIC (0~9) SETUP

To use the number buttons for track/chapter/title To change the initial settings.
selection.

12 Controls & Display

Downloaded from www.Manualslib.com manuals search engine

 Controls & Display

SLOW ( ) Z
To play the disc contents in slow forward.
ZOOM
SORT/PIP
Enlarges DVD or HDD screen image up to 2 times.
To sort the titles of HDD in the order of the title
name or date.
To view the external video while the DVD or HDD
is played back.
STANDBY/ON ( )
Activates the unit POWER ON or into STANDBY.
STOP ( )
To stop a disc or HDD playing.
SUBTITLE
To select the subtitle language.

T
TIMER REC
To set a timer recording.
TIMESHIFT
To store a TV program in the HDD storage cache
temporarily.
TITLE
To display the title menu of the DVD.
TV
To switch to the TV mode.
TV/DVD
To view channels selected by the recorder tuner or
by the TV tuner.
It works only when recorder and TV is connected
by European Scart cable while SCART out setting
is RGB in Setup Menu.
TV MODE
Set up TV type according to type supported by
user’s TV.
Each time you press this button repeatedly, the TV
type will change among NTSC, PAL and
progressive scan/HDMI.
This button works only when the disc tray is open.

Controls & Display 13

Downloaded from www.Manualslib.com manuals search engine
 Connection

Connection for Video Output Terminals

Composite Video (CVBS) Output
The composite video output is supported by most televisions.
The composite video jack on TV is usually yellow and may be labeled video, CVBS, composite.
EURO AV Output
The Euro AV terminal can be connected to the TV equipped with Euro AV connector.
The audio transmitted on the Euro AV is stereo sound.
S-Video Output
The S-Video output can be connected to the TV equipped with an S-Video input.
The S-Video jack on TV may be labeled S-Video, Y/C, S-VHS.
The S-Video provides better picture than the composite video.
Component Video Output
The component video output can be connected to the TV equipped with component input.
The component video jacks on TV may be labeled YUV, Y/Pb/Pr, Y/Cb/Cr and may be
green, blue, red. The component video provides the best picture.
Set “Video Output” to “YCrCb On” from VIDEO SETUP menu.

NOTE
• RF OUT, is labeled TO TV, is signal pass-thru only.
• A S-Video cable is not supplied.

14 Connection

Downloaded from www.Manualslib.com manuals search engine

 Connection

Connection for Audio Output Terminals

You can enjoy the Dolby surround sound by
connecting the digital audio output to the audio
amplifier.
Audio Output
Use audio outputs for connection with your TV.
Digital Audio Output
Use digital audio outputs for connection with
Dolby Digital or DTS decoder. From the Digital
Audio Output menu, select “PCM” or “Bitstream”
according to your decoder.

NOTE
An optical cable and coaxial cable are not supplied.

Connection for A/V Input Terminals

You can record programs from AV system such
as VCR, Satellite receiver or Decoder box.
Audio Input
Connect the Audio Input to the Audio Output of
AV system.
Video Input
Connect the Composite Video or S-Video Input to
the Composite Video or S-Video Output of AV
system.
Or connect the Euro AV IN/OUT to the Euro AV
OUT of AV system.

Connection 15
Downloaded from www.Manualslib.com manuals search engine
 Connection

Connection for DV IN and USB IN

Using the DV IN, it is possible to read digitally the
contents of DV tapes.
DV Input
Connect the DV IN to the DV in/out jack on your
DV camcorder using a DV cable (not supplied).
USB Input
Insert the USB memory in the USB jack of this
recorder.

Connection for HDMI Output

HDMI (High Definition Multimedia Interface)
transfers the digital video and audio from your
recorder to your TV.
Connect the HDMI Output to the HDMI Input of TV
with a single HDMI cable.

16 Connection

Downloaded from www.Manualslib.com manuals search engine

 Getting started

Turning on and off Displaying the disc information

on screen (OSD)
1
Turn on your TV and set the video input
to this recorder. You can display the playback status on TV screen
as follows ; Title, Chapter number, Playing time.

2
Press STANDBY/ON button on the remote

1
controller or the front panel to turn on. Press DISPLAY button during playback.
You can see the on-screen information. Title, Chapter number, Playing time, Audio
If you want to turn off, press STANDBY/ON language and Subtitle appear on TV screen.
button again on the remote controller or the

2
front panel. Press DISPLAY button once more.
You can see the playback status in detail.
Also you can change the subtitle language,
chapter, and so on using , , , ENTER
Selecting the HDD or DVD for button.
playback and recording

1
If you want to switch to the HDD mode,
press HDD/DUB button on the remote
control.

2
If you want to switch to the DVD mode,
press DVD button on the remote control.

3
To turn off the on-screen display, press
DISPLAY button.

Getting started 17
Downloaded from www.Manualslib.com manuals search engine
 Basic Playback

Playing a DVD disc Playing an Audio CD

1 1
Press OPEN/CLOSE button to open the Load an Audio CD.
disc tray. The first song is played back automatically.
Put a disc on the disc tray with logo-printed

2
side up. Press DISPLAY button.
The disc information is displayed on the TV

2
Press OPEN/CLOSE button again to close screen.
the disc tray.
The disc will be loaded automatically.

3 The TV screen shows disc menu.

4
Select the desired item by using , , ,
or 0 to 9 button, then press ENTER or
PLAY button to start playback.

<Audio CD>

Playing a DVD±RW or DVD±R disc

3
Select “TRACK” by using or button,
and press ENTER button.
1
Load a DVD±RW or DVD±R disc.
The menu screen is displayed automatically.

4
Enter the desired track No. by using 0 to 9
button, and press ENTER button.
The selected song is played back.
If you press or button during
playing back, you can hear the next
song or the previous song.

2
Select the desired program by using
or button.

3
Press ENTER or PLAY button to start
playback.

4
Press TITLE or MENU button to return to
the menu screen.

18 Basic Playback

Downloaded from www.Manualslib.com manuals search engine

 Basic Playback

Playing a JPEG CD Playing MPEG-4 Movie CD

1 1
Load a JPEG CD.
Load a MPEG-4 disc.
The directory & file list is displayed on the TV
screen.

2
Press Enter button after selecting the

2
Select the desired file by using or directory of Disc using , button.
button.

3
You can see the thumbnail picture of selected Press Enter button after selecting the
file on the right window. desired movie using , button.
The selected movie is played back.

3
Press ENTER button to start playback.
The JPEG files are played in order NOTE
automatically.
If you press or button during Some of the MPEG-4 movies could not be played
playing back, you can see the next depending on encoding method.
picture or the previous picture.

4
Picture rotation and zoom
You can rotate the picture to the left or right
by using or button.
Also you can enlarge the picture up to 4
times or reduce it up to a quarter by using
or button.

5
To see the file list, press STOP button.
The file list is displayed on the TV screen.

Basic Playback 19
Downloaded from www.Manualslib.com manuals search engine
 Basic Playback

Playing a program of HDD Playing a JPEG in HDD

1 1
Press HDD/DUB button to select the HDD
Press FILE button.
mode.
The program list of HDD appears on screen.

2
Press ENTER button after selecting the
directory of HDD using or button.
The file list of HDD appears on screen.

2
Select the desired program by using
or button in the program list.

3 3
Press PLAY button. Select the desired file by using or
It starts to play the selected program. button.
You can see the thumbnail picture of
selected file on the right window.

4
Press ENTER button to start playback.
The JPEG files are played in order
automatically.
If you press or button during
playing back, you can see the next picture or
the previous picture.

5
Picture rotation and zoom.
You can rotate the picture to the left or right
by using or button.

6
To see the file list, press STOP button.
The file list is displayed on the TV screen.

20 Basic Playback

Downloaded from www.Manualslib.com manuals search engine

 Basic Playback

Playing MPEG-4 Movie in HDD

1 Press FILE button.

2
Press ENTER button after selecting the
directory of HDD using or button.
The program list of HDD appears on screen.

3
Press ENTER button after selecting the
desired movie using , button.

4
To see the file list, press STOP button.
The file list is displayed on the TV screen.

NOTE
Some of the MPEG-4 movies could not be played
depending on encoding method.

Basic Playback 21
Downloaded from www.Manualslib.com manuals search engine
 Advanced Playback

Fast Forward/Backward Slow Forward

Use this function to play the DISC or HDD contents Use this function to play the DISC or HDD contents
in fast forward or fast reverse. in slow forward.
There is no sound during searching.

1
Press SLOW button during play mode.

1
Press or button during play mode. The disc content is played slowly in forward.
Each time you press the button, playback

2
speed changes as below. Press SLOW button.
Each time you press the button, playback
speed changes as below.

3
Press PLAY button to resume normal
playback.

Frame by Frame Playback

(DVD/VCD only)
2
Press PLAY button to resume normal
playback.
1
Press PAUSE button during play mode.
The DVD Recorder pauses the playing
temporarily.
Skip Forward/Backward
2
Press PAUSE button repeatedly.
(DVD/Audio CD only) Each time you press, one frame is displayed
Use this function to move to the next or previous at a time.
chapter for DVD, track for Audio CD.

3
Press PLAY button to resume normal
playback.
1
Press button during play mode.
The DVD Recorder starts playing the
previous chapter or track. NOTE
• There is no sound during viewing Frame playback or Slow

2
Press button during play mode. playback.
The DVD Recorder starts playing the next • Audio CD do not have Frame Playback and Slow
chapter or track. Playback feature.

22 Advanced Playback

Downloaded from www.Manualslib.com manuals search engine

 Advanced Playback

Program Playback (Audio CD only) 6

To delete a song from the program list,
select the song you want to delete by
This feature lets you program the play order of using , , , button, then press
tracks on a disc. ADD/CL button.
The selected song is erased from the
program list.
1
Load an Audio CD.
The first song is played back automatically.
7
To exit the program list, press RETURN
button.

2
Press PROGRAM button.
The track list is displayed on the TV screen.

3
Select the desired song by using or
button in the track list, then press
ADD/CL button.
The selected song is added on the right
program list.

4
Repeat step 3 if you want to select other
songs.

5
Move the cursor to the program list by
pressing button, then press ENTER
button.
It starts playback of a saved program list.

Advanced Playback 23
Downloaded from www.Manualslib.com manuals search engine
 Advanced Playback

Selecting Subtitles (DVD only) Selecting Audio Languages

It is possible to change the subtitle language to a (DVD only)
different language from the one selected at the It is possible to change the audio language to a
initial settings. This operation works only with discs different language from the one selected at the
on which multiple subtitle languages are recorded. initial settings. This operation works only with discs
If the loaded disc supports multiple subtitles, you on which multiple audio languages are recorded.
can select the subtitle language. If the loaded disc supports multiple audio
languages, you can select the audio language.

1
Press SUBTITLE button during playing.

1
The subtitle is displayed on the bottom of Press AUDIO button during playback.
screen. The audio information is displayed on the top
of screen.

2
Each time you press SUBTITLE button,

2
the subtitle language is changed. Each time you press AUDIO button, the
audio language is changed.

3
To turn off the subtitle, select “OFF” by
pressing SUBTITLE button. NOTE
Some discs only allow you to change subtitle or audio
language from the disc menu.

24 Advanced Playback

Downloaded from www.Manualslib.com manuals search engine

 Advanced Playback

Repeating a Title, Chapter A-B Repeat

(DVD/Audio CD only) (DVD/Audio CD only)
It is possible to repeat the chapter/title for DVD or Use this function to repeat the play of a selected
track/disc for Audio CD. segment. This is very useful for studying foreign
languages because it repeats the selected

1
Press REPEAT button during playback. segment until canceled.
The repeat information is displayed on the

1
top of screen. Press A-B/LANG button at the point of
where repeat play is to start.
The starting point of your selected segment
is set up.

2
Press A-B/LANG button again at the point
of where repeat play is to end.
The ending point is set up.
It is played repeatedly from A to B.

3
To cancel the A-B repeating, press
A-B/LANG button once more.
The playing state changes to normal.

2
Each time you press REPEAT button, the
repeat mode is changed as follows.
NOTE
We recommend you set up the desired segment within a
minimum 5 seconds for smooth repeat play.

NOTE
With some DVD discs, there may be times when repeat
playback is not possible.

Advanced Playback 25
Downloaded from www.Manualslib.com manuals search engine
 Advanced Playback

ZOOM screen (DVD/HDD only) Switching the Camera Angle

The zoom function allows you to enlarge DVD or (DVD only)
HDD screen image up to 2 times.
When a DVD contains recorded multiple angles of
a scene, you can select the Angle function.

1
Press ZOOM button during playback.
The picture is zoomed.
1
Press ANGLE button during playing.
Available angles of the current scene will be
displayed on the top of screen.

2
Each time you press ANGLE button, the
angle is changed.

NOTE
• You can only change the angle for DVDs that provide
multiple angles of scenes.
• The angle function will not work on DVD video discs that
do not contain recorded multiple angles.

2
Each time you press ZOOM button, the
zoom mode will be changed :

3
You can move the image by using
, , , button.

4
To cancel the zoom mode, press ZOOM
button repeatedly until the recorder
resume to normal playback.

NOTE
You can’t use this feature when the MPEG-4 movie is
being played.

26 Advanced Playback

Downloaded from www.Manualslib.com manuals search engine

 Advanced Playback

Direct Search (DVD only)

You can select a specific chapter or title to play.

1
Press DISPLAY button twice during
playback.
The playback information appears on TV
screen.

2
Title Search
1 Select “TITLE” by pressing , button,
and press ENTER button.
2 Enter the title number by using numeric 0
to 9 button, and press ENTER button.
It starts to play back from the specified
title.

Chapter Search
1 Select “CHAPTER” by pressing ,
button, and press ENTER button.
2 Enter the chapter number by using
numeric 0 to 9 button, and press ENTER
button.
It starts to play back from the specified
chapter.

Advanced Playback 27
Downloaded from www.Manualslib.com manuals search engine
 Recording

Basic recording 4
Press REC button to start your recording.
Press PAUSE button if you want to stop the
To record TV programs, you should search TV recording for a short while.
channels first. Press REC button to continue recording.

1 5
Press HDD/DUB or DVD button to select Press STOP button to stop your
the HDD(Hard Disk Drive) or a recordable recording.
DVD (DVD±R/DVD±RW) on which you
want to record. NOTE
If you want to record on the HDD, press
• A DVD±R/DVD±RW can record for up to 6 hours, up to
HDD/DUB button. The HDD menu is 49 titles.
displayed on TV screen. • If your source is copy-protected, you will not be able to
record it.

2
If you want to record on DVD, load a
DVD±RW or DVD±R disc with enough free
space for the recording.
● If you load a new blank disc, it asks for

formatting the disc. OTR (One touch Timer Recording)

Press ENTER button after selecting “OK”.

1
● If the DVD menu is displayed on TV screen During basic recording, press REC
automatically, press STOP button twice to button.
stop. Every time you press REC button, the
recording time will increase by 30 minutes.

3
Press AV IN button to choose the A/V It is possible to record for up to 3 hours if
source you want to record. there is enough room on the disc (or HDD)
Every time this button is pressed, the A/V and the record quality is SLP.(or the length of
source is changed : timeshift buffer is set to 360 minutes.)
The DVD recorder will stop automatically
after recording for a specific time.

2
If you want to cancel OTR, press STOP
button.

If you want to record the TV program, select

the TV mode. And choose the station you
want to record by pressing CHANNEL – or
CHANNEL + button.

28 Recording

Downloaded from www.Manualslib.com manuals search engine

 Recording

Timer Recording 5
Select “Quality” by pressing button,
and press ENTER button to bring up the
For timer recording, the clock, date, and stations list.
must be set correctly. Select the Record Quality by using or
If you want to record on DVD, load a DVD±RW or button, and press ENTER button to confirm.
DVD±R disc with enough free space for the

6
recording. Select “Mode” by pressing button,
press ENTER button to bring up the list.

1
Select how often you want to make the
Press TIMER REC button.
recording, for example, once, daily or weekly
by pressing or button, and press
ENTER button to confirm.

7
Select “Date” by pressing button, and
press ENTER button.
Enter the date by using 0 to 9 button, and
press ENTER button to confirm. If you
selected “Weekly” in step 6, press ENTER
button after selecting a day of week by using
or button.

8
Select “Start” by pressing button,

2
Select an unused program by pressing press ENTER button.
or button, then press ENTER button. Enter the Start time by using 0 to 9 button,
and press ENTER button to confirm.

9
Select “End” by pressing button, press
ENTER button.
Enter the End time by using 0 to 9 button,
and press ENTER button to confirm.

10
Select “Title” by pressing button,
press ENTER button.
Enter the title name by using , , ,
button, and press ENTER button to confirm.

3 11 (If “Source”
Press ENTER button. The sub-menu Switch VPS/PDC “ON” or “OFF” by using
appears. , and ENTER button.
Select the signal source by using or is not set to TV channel, this
button, and press ENTER button to confirm. function is not available.)
The VPS/PDC system automatically adjusts

4
Select “Record To” by pressing button, the recording time so that even if a program
and press ENTER button to bring up the is not running to schedule you won’t miss it.
list. For VPS/PDC to work properly, you must
Select HDD for hard disc recording or DVD input the correct announced time and date of
for DVD recording by using or button, the program you want to record. Note that
and press ENTER button to confirm. VPS/PDC may not work with every station.

Recording 29
Downloaded from www.Manualslib.com manuals search engine
 Recording

12 bycorrect. Timer review - changing and

Press ENTER button after selecting “OK”
using button if all the settings are
erasing record settings

13 1
Switch your DVD Recorder off by Press TIMER REC button.
pressing STANDBY/ON button. You can see all the timer programs currently
set.
NOTE
• You can switch your DVD Recorder on again if you want
to set the timer to record another program. Remember to
switch the DVD Recorder off when you have finished.
• To stop a timer recording which has already started,
press STANDBY/ON or STOP button.
• You can pre-program the schedule to record up to 8
programs.
• We recommend you set up the recording time over 5
minutes.

2
Select the program you want to change or
erase by pressing or button.

3
Erasing a setting
Press ADD/CL button to erase.

Changing a setting
Press ENTER button.
Select the details you want to change by
pressing or button, and press ENTER
button.
Change the settings by using , or the
number buttons 0 to 9.
When you have made all the changes, press
ENTER button.

4
Press ENTER button after selecting “OK”
using button if all the settings are
correct.

5 Press TIMER REC button to exit.

30 Recording

Downloaded from www.Manualslib.com manuals search engine

 Recording

Recording from a DV Time Shifted Recording

(Digital Video) camcorder This recorder automatically saves the program on
You can record the contents of DV tape from a DV air in the HDD temporarily, this allows the user to
camcorder via DV IN. manipulate the saved program using functions
Make sure your digital camcorder is connected to such as rewind, fast forward, replay and pause.
DV IN jack on the front panel.

1
Also turn on your DV camcorder and set it to PLAY Press the playback control buttons such
(or VCR) mode. as , , , , , while
watching TV, the Time bar appears on the
bottom of the screen.
1
Press HDD/DUB or DVD button to select
the HDD(Hard Disk Drive) or a recordable
DVD (DVD±R/DVD±RW) on which you
want to record.
If you want to record on DVD, load a
DVD±RW or DVD±R disc with enough free
space for the recording.

2 Press DV/USB button.

3
Find the place on the camcorder tape that
you want to start recording from.
2
Pause
You can use the remote controller for this If you press PAUSE button, the current
recorder to control the camcorder using program is paused. If you press PLAY
PLAY, STOP, PAUSE, , button. button, the program is resumed from that
For best results, press PAUSE button at the point.
point from which you want to record.

4
Press REC button to start your recording.
Press PAUSE button if you want to stop the
3 Fast Forward/Backward
1 Press or button during
recording for a short while. playback.
Press again REC button to continue Whenever you press the button, the
recording. playback speed increases by 3 steps.
2 Press PLAY button to resume normal

5
Press STOP button to stop your
playback.
recording.

NOTE 4 Skip Forward/Backward

1 Press button during playback.
• Depending on the connected camcorder, you may not
be able to control it using the remote control supplied The DVD recorder starts playing the
with this recorder. previous chapter.
• If this recorder does not recognize the DV camcorder,
insert the DV cable again into the DV IN jack after
2 Press button during playback.
pulling it from the DV in jack. The DVD recorder starts playing the next
chapter.

Recording 31
Downloaded from www.Manualslib.com manuals search engine
 Recording

5 Slow Forward
1 Press SLOW button during playback.
Simultaneous recording and
playback
The current program is played slowly in
forward. You can playback a HDD title and record a TV
Whenever you press the button, the slow program on the disc at the same time.
speed is changed by 3 steps. Also you can playback a DVD title and record a TV
program on HDD at the same time.
2 Press PLAY button to resume normal
playback.
1
Playing a HDD title while you record a TV
program on the disc.

6
Recording
1 Press HDD/DUB button during
While the time shift operation records the
program temporarily, the record operation recording.
records the program permanently on HDD so The program list of HDD appears on
you can playback the recorded program at screen.
anytime. 2 Select the desired program by using
1 Press REC button to start recording the or button in the program list.
current program. 3 Press PLAY button to start playing.
2 Press STOP button to stop recording.

2
Playing a DVD title while you record a TV
program on HDD.
NOTE
1 Press DVD button during recording.
• This function is not available in the DVD mode. If you
want to use the time shift recording, press TIMESHIIFT The disc menu appears on screen.
button while watching TV. 2 Select the desired item or the desired title
• If OSD Menu is shown on during Time Shift from A/V
using , , , button.
inputs and from digital TV, OSD Menu could be
recorded together. Therefore please escape from the 3 Press ENTER or PLAY button to start
OSD Menu if you want to record Time Shift period. playing.

32 Recording

Downloaded from www.Manualslib.com manuals search engine

 Copying

2
Use the copying features of this recorder to:
Copying a title from disc to HDD.
• Back up important recordings stored on the HDD
to a DVD. 1 Press DVD button.
• Make a DVD copy of a recording on the HDD to The title menu will show on the TV
play in another player. screen.
• Transfer video from a DVD to the HDD for editing.
2 Press button after selecting the title
• Transfer edited video from the HDD to DVD.
to copy by using or button.
The edit menu will show on the TV
Copyright screen.
Recording equipment should be used only for
lawful copying and you are advised to check
carefully what is lawful copying in the country in
which you are making a copy. Copying of copyright
material such as films or music is unlawful unless
permitted by a legal exception or consented to by
the rightowners.

Copying the DVD titles from Disc 3 Press ENTER button after selecting
to HDD “Copy title” by using or button.
It starts to copy the selected title from
Make sure the DVD disc to copy is inside of the DVD to HDD.
recorder.

1 Copying all titles from disc to HDD.

1 Press DVD button.
The title menu will show on the TV
screen.
2 Press button, and press button.
The edit menu will show on the TV
screen.

3 Press ENTER button after selecting

“Copy All” by using or button.
It starts to copy all titles from disc to HDD.

Copying 33
Downloaded from www.Manualslib.com manuals search engine
 Copying

Copying the titles from HDD to Copying the files from disc to HDD
Disc (from HDD to Disc)
Make sure the recordable DVD Make sure the disc to copy or recordable DVD
(DVD±R/DVD±RW) is inside of recorder. (DVD±R/DVD±RW) is inside of the recorder. You
can copy the MP3 files, JPEG files and MPEG-4

1
Press HDD/DUB button. files from disc to HDD (or from HDD to disc).
The title list of HDD will show on the TV

1
screen. Press FILE button.
The directory & file list will be displyed on the
TV screen.

2
Press ENTER button after selecting the
title to copy by using or button.

2
A mark is put on the selected title. Press EDIT button.
The copy menu will be displayed on the TV

3
Repeat step 2 if you want to select other screen.
titles.

4
Press HDD/DUB button.
It starts to copy the selected titles from HDD
to disc.

3
Press ENTER button after selecting
“copy” using or button.

4
Select the directory of source file to copy
by using , , ENTER button.
(If you want to copy the file of disc, select the
DVD directory. If you want to copy the file of
HDD, select the HDD directory.)
The file list will show on the screen.

34 Copying

Downloaded from www.Manualslib.com manuals search engine

 Copying

5 Copying the files from the USB

Press ADD/CL button after selecting the
file to copy by using or button.
The selected file will be added on the right flash memory to HDD (or disc)
file list.
Make sure the flash memory is inserted into the
USB IN jack.
If you want to copy the files on the disc, load a
recordable DVD (DVD±R/DVD±RW).

1
Press FILE button.
The directory & file list will be displayed on
the TV screen.

6
Repeat step 5 if you want to copy other
files.

7 Press button.

8
Select the directory where you want to
copy the selected files by using , ,
2
Press EDIT button.
ENTER button.
The copy menu will be displayed on the TV
(If you want to copy the files from disc to screen.
HDD, select the subdirectory of HDD.
If you want to copy the files from HDD to
disc, select the DVD directory.)

9
Press REC button.
It starts copying the files from disc to HDD
(from HDD to disc).

10
Press EDIT button to exit after finishing
copying.

3
Press ENTER button after selecting
“Copy” using or button.

4
Press ENTER button after selecting the
USB directory by using or button.

Copying 35
Downloaded from www.Manualslib.com manuals search engine
 Copying

5
Press ADD/CL button after selecting the
file to copy by using or button.
The selected file will be added on the right
file list.

6
Repeat step 5 if you want to copy other
files.

7 Press button.

8
Select the directory where you want to
copy the selected files by using , ,
ENTER button.
(If you want to copy the files on the HDD,
select the subdirectory of HDD.
If you want to copy the files on the disc,
select the DVD directory.)

9
Press REC button.
It starts copying the files from the flash
memory to HDD (or disc).

10
Press EDIT button to exit after finishing
copying.

NOTE
• Don’t use more than 500mA flash memories.
• If this recorder does not recognige the USB flash memory,
insert the USB flash memory again into the USB IN jack
after pulling it from the USB IN jack.

36 Copying

Downloaded from www.Manualslib.com manuals search engine

 Editing

Editing a DVD±RW or DVD±R Rename disc (DVD±RW/DVD±R)

disc
1
Press ENTER button after selecting
“Rename disc” by using or button.

1
Load a DVD±RW or DVD±R disc. The keyboard will show on the screen.
The DVD menu screen is displayed
automatically.

2
Press button to go to the top of the
DVD menu.

3
Press button, the Disc Edit menu will
show on the screen.

2
Select a letter which you want to input by
using , , , button, and press
ENTER button to confirm it.

3
Repeat step 2.
The maximum length of the disc name is up
to 9 characters.
<DVD±RW>

4
The control bars of the bottom line in the
keyboard is for edit command.
If the inputting of letters is finished, press
ENTER button after selecting “OK”.

<DVD±R>

Play disc (DVD±RW/DVD±R)

You can play back the entire disc from the
beginning to the end.

1
Press ENTER button after selecting
“Play” by using or button.
It starts to play back the beginning of the
disc.

Editing 37
Downloaded from www.Manualslib.com manuals search engine
 Editing

Erase optical disc (DVD±RW only) Overwrite disc (DVD±RW only)

1 1
Press ENTER button after selecting Press ENTER button after selecting
“Erase optical disc” by using or “Overwrite disc” by using or button.
button. It will be changed from DVD mode to AV
The pop-up menu will show on the screen. input mode.

2
Press AV IN button to choose the A/V
input you want to record.
Every time this button is pressed, A/V input is
changed :

2
Press ENTER button to erase the
contents of a disc after selecting “Yes” by
using , button.
It takes a few minutes to erase the disc.

NOTE
The Erase function only works on DVD±RW discs.

If you want to record the TV program, select

the TV mode. And choose the station you
want to record by pressing CHANNEL – or
CHANNEL + button.

3
Press REC button to start your recording.
It starts to record from the beginning of the
disc.

4
Press STOP button to stop your
recording.

NOTE
Recorded programs will be erased from the beginning if
overwritten.

38 Editing

Downloaded from www.Manualslib.com manuals search engine

 Editing

Finalize disc (DVD±R only) Lock disc (DVD±RW only)

If you want to make your DVD±R disc compatible You can lock your current disc to prevent further
with other DVD players or recorders, you should editing or recording to the disc.
finalize the disc.

1
Press ENTER button after selecting “Lock

1
Press ENTER button after selecting disc” by using or button.
“Finalize disc” by using or button. It takes 2~3 minutes to lock the disc.
The pop-up menu will show on the screen. If the disc is locked, you can not make any
changes any more except play it back.

2
Press ENTER button to confirm after
selecting “Yes” by using , button.
It takes a few minutes to finalize the disc.

NOTE
• The FINALIZE function only works once in DVD±R disc.
• If a DVD±R has been finalized, you can not record or
edit the DVD±R any more.

2
If you want to unlock the locked disc,
select “Unlock disc” by using or
button.

3
Press ENTER button.
It takes a few minutes to unlock the disc.

Copy All (DVD±RW/DVD±R)

You can copy all titles from DVD to HDD.

1
Press ENTER button after selecting
“Copy All” by using or button.
It starts to copy all titles from DVD to HDD.

Editing 39
Downloaded from www.Manualslib.com manuals search engine
 Editing

Editing a title of DVD±RW Play title (DVD±RW/DVD±R)

or DVD±R You can play back the selected title.

1
Press ENTER button after selecting “Play
1
Insert a recorded DVD±RW or DVD±R disc
on the disc tray. title” by using or button.
The menu screen is displayed automatically. It starts to play back the selected title.

2
Select one title to edit by using or
button.
Edit title (DVD±RW/DVD±R)

3
Press button, the Title Edit menu will
1
Press ENTER button after selecting “Edit
show on the screen. title” by using or button.
It starts to play back and the pop-up menu
will show on the screen.

<DVD±RW>

1-1 Select an available title

Select to choose an available title by
inputting numbers.

1-2 Select an available chapter

Select to choose an available chapter by
inputting numbers.
<DVD±R>
1-3 Play
Control playback by various setting such as
Fast forward, Fast reverse, Slow.

1-4 Chapter marker

You can insert a chapter or delete it.
Press ENTER or button, the pop-up
menu will show on the screen.

40 Editing

Downloaded from www.Manualslib.com manuals search engine

 Editing

1 To insert a new chapter marker,

select “Insert marker” by using
Rename title (DVD±RW/DVD±R)
or button.

1
Press ENTER button after selecting
You can search a scene by using
“Rename title” by using or button.
, or PLAY button.
The keyboard will show on the screen.
Press ENTER button at the point where
you would like to insert a new chapter.

2 To delete a chapter marker, select

“Delete marker” by using or
button.
You can search the chapter by using
or button.
Press ENTER button at the chapter
where you would like to delete.
3 To delete all chapter markers, select
“Delete all markers” by using

2
or button. Select a letter which you want to input by
using , , , button, and press
Press ENTER button to confirm it.
ENTER button to confirm it.

1-5 Hide chapter/Unhide chapter

3
Repeat step 2.
It is a useful function to hide commercials.
The maximum length of the disc name is 9
Select “Hide chapter” by using or
characters.
button, and press ENTER button.
If current chapter is the hidden chapter,

4
“Unhide chapter” is displayed on the menu The control bars of the bottom line in the
instead of “Hide chapter”. In this case, you keyboard is for edit command.
can unhide the chapter by pressing ENTER If the inputting of letters is finished, press
button after selecting “Unhide chapter”. ENTER button after selecting “OK”.

1-6 Index picture

You can change the thumbnail for the
selected title.
Press ENTER button at the point where you
prefer to be the thumbnail.

1-7 Split title (DVD±RW only)

You can divide the current title to 2 titles.
Press ENTER button at the point where you
would like to divide. It takes a few minutes
to divide the title.

1-8 T-Elapsed
You can see the elapsed time.

2
Press STOP button after finishing to edit
the title.
It takes a few minutes to update the disc.

Editing 41
Downloaded from www.Manualslib.com manuals search engine
 Editing

Erase title (DVD±RW only) Overwrite title (DVD±RW only)

1 1
Press ENTER button after selecting Press ENTER button after selecting
“Erase title” by using or button. “Overwrite title” by using or button.
The pop-up menu will show on the screen. It will be changed from DVD mode to AV
input mode.

2
Press AV IN button to choose the A/V
input you want to record.
Every time this button is pressed, A/V input is
changed :

2
Press ENTER button to erase the
contents of a title after selecting “Yes” by
using , button.
It takes a few minutes to erase the title.

NOTE
The Erase function only works on DVD±RW discs.

If you want to record the TV program, select

the TV mode. And choose the station you
want to record by pressing CHANNEL – or
CHANNEL + button.

3
Press REC button to start your recording.
It starts to record from the beginning of the
current title.

4
Press STOP button to stop your
recording.

NOTE
The recorded programs will be erased from the beginning
for recording time.

42 Editing

Downloaded from www.Manualslib.com manuals search engine

 Editing

Append title (DVD±RW/DVD±R) Copy title (DVD±RW/DVD±R)

You can record on the last title continously. If you You can copy a title from DVD to HDD.
do not select the last title this menu will not be

1
displayed on the screen. Press ENTER button after selecting
“Copy title” by using or button.

1
Press ENTER button after selecting It starts to copy a title from DVD to HDD.
“Append title” by using or button.
It will be changed from DVD mode to AV
input mode.

2
Press AV IN button to choose the A/V
input you want to record.
Every time this button is pressed, A/V input is
changed :

If you want to record the TV program, select

the TV mode. And choose the station you
want to record by pressing CHANNEL – or
CHANNEL + button.

3
Press REC button to start your recording.
It starts to record.

4
Press STOP button to stop your
recording.

NOTE
If there is no space on the disc, this menu will not be
displayed on the screen.

Editing 43
Downloaded from www.Manualslib.com manuals search engine
 Editing

Editing the title of HDD Split

You can divide the current title to 2 titles.

1
Press HDD/DUB button to select the HDD

1
mode. Press ENTER button after selecting
The title list of HDD appears on screen. “Split” by using or button.
It starts to play back the current title.

2
Select the title to edit by using or

2
button, and press button. Find the point where you would like to
The edit menu appears on screen. split.
You can search a scene by using , or
PLAY button.

3
Press ENTER button at the point where
you would like to split.
The pop-up menu will show on the screen.

4
Press ENTER button to confirm after
selecting “OK” by using or button.

Play
You can play back the selected title.

1
Press ENTER button after selecting
“Play” by using or button.
It starts to play back the selected title.

Delete

1
Press ENTER button after selecting
“Delete” by using or button.
The pop-up menu will show on the screen.

2
Press ENTER button to delete the title
after selecting “Yes” by using or
button.

44 Editing

Downloaded from www.Manualslib.com manuals search engine

 Editing

Segment Change Index Picture

You can skip the parts you mark when the title is You can change the thumbnail for the selected
played back. title.

1 1
Press ENTER button after selecting Press ENTER button after selecting
“Segment” by using or button. “Change Index Pic” by using or
The title will automatically start playing back. button.
The title will start playing automatically.

2
Find the beginning of a segment where

2
you would like to skip. Press ENTER button at the point where
You can search a scene by using , or you prefer to be the thumbnail.
PLAY button. (You can search a scene by using ,
or PLAY button.)

3
Press ENTER button at the beginning of a The pop-up menu will show on the screen.
segment where you want to skip.

3
Press ENTER button to confirm after

4
Find the end of a segment where you selecting “OK” by using or button.
want to skip, and press ENTER button at
the end of a segment.

Rename
5
If you want to mark more segments,
repeat step 3 & 4.
You can change the name of title.
The marked segments are displayed as the
violet colored bars on the progress bar.
1
Press ENTER button after selecting
“Rename” by using or button.

6 Press STOP button if it is finished. The Keyboard will show on the screen.

2
Press ENTER button to delete the current
NOTE name after selecting “Clear” button on
When the title with segments is copied from HDD to DVD, the Keyboard.
the segments are not copied to DVD.

3
Select a letter which you want to input by
using , , , button, and press
ENTER button to confirm it.

Combine
4
Repeat step 3.
You can combine two titles. The maximum length of the name is upto 12
characters.

1
Press ENTER button after selecting

5
“Combine” by using or button. Press ENTER button after selecting “OK”
button on the keyboard if the inputting of
letters is finished.
2
Select the title to be combined by using
or button, and press ENTER button.
(If you want to cancel, press RETURN NOTE
button.) This function is not available when the preview type in the
setup menu is set to “Dynamic”.

Editing 45
Downloaded from www.Manualslib.com manuals search engine
 Editing

Lock
You can lock the title so that anyone can not play
it.

1
Press ENTER button after selecting
“Lock” by using or button.
The title will be locked.

Unlock
You can unlock the locked title.

1
Press ENTER button after selecting
“Unlock” by using or button.
The password window will be displayed on
TV screen.

2
Enter the password in 4 digits by using 0
to 9 button.

3
Press ENTER button to confirm after
selecting “OK” by using button.
The title will be unlocked.

Protect
You can protect the title from editing.

1
Press ENTER button after selecting
“Protect” by using or button.
The title will be protected. You can play the
protected title, but you can not edit it.

Unprotect
You can unpretect the protected title.

1
Press ENTER button after selecting
“Unprotect” by using or button.
The protected title will be unprotected.

46 Editing

Downloaded from www.Manualslib.com manuals search engine

 Using the Setup Menu

Once the initial settings have been completed, the

DVD recorder can always be operated under the
Record & Channel Scan ( )
same conditions whenever the power is switched
on. These settings are called SETUP data that are
easily modified and stored using the SETUP menu.

Basic Operations
Press SETUP button during stop mode. And use
, , , and ENTER, RETURN button to
navigate and select options. The current setting for
any option is marked with a colored box.

1
AUTO CHAPTER MARKER

1
Press STOP button, if the disc is being When “Auto Chapter Marker” is set to “5
played. min”, chapters are created automatically
within a title at five-minute intervals.

2
To call the SETUP menu, press SETUP Chapters can also be added or removed
button. manually through the Editing features.
For details, see section “Editing a title”.

3
Select the desired item by using or

2
button, then press ENTER button. RECORD QUALITY
The record quality offers 6 quality level :

4
Select the desired sub item by using
, , , and ENTER button. • HQ : High Quality, you can record for up to
If you want to go the previous menu, press 1 hour in a blank disc.
RETURN button. • SP : Standard Play, you can record for up
to 2 hours in a blank disc.

5
Press SETUP button after you have made • SP+ : Extended SP, you can record for up
all settings. to 2 hrs 30 min in a blank disc.
• LP : Long Play, you can record for up to 3
NOTE hours in a blank disc.
Depending on the disc, some setup menu selections may
• EP : Extended Play, you can record for up
not work properly. to 4 hours in a blank disc.
• SLP : Super Long Play, you can record for
up to 6 hours in a blank disc.

Using the Setup Menu 47

Downloaded from www.Manualslib.com manuals search engine
 Using the Setup Menu

3
ANALOG CHANNEL SCAN Editing the channel name
This recorder has a built-in TV tuner for
recording TV programs. 1 Press ENTER button after selecting “Name”
by using or button.
1 Press ENTER button after selecting
“SCAN” by pressing or button. 2 Input letters which you want to input by using
, , , button, and press ENTER button
2 Press ENTER button to confirm after
to confirm it.
selecting “OK” by pressing or
button.
It will search channels automatically.
TV Standard
If the broadcasting is found during auto Set the TV system used for the current channel.
searching, it is stored automatically.
1 Select “Standard” by using or button,
and press ENTER button.
NOTE
2 Select the TV system by using or
• While doing Channel Search, it will erase and replace
button, and press ENTER button.
all previously stored channels.
• This feature is available only when the recorder is set to
the TV mode. Search Type
If the captured signal is bad, you can search the
channel again by frequency or channel number.
4
MODIFY CHANNEL
(If there is no captured channel, this feature 1 Select “Search Type” by using or
is not available.) button, and press ENTER button.

4-1 Press ENTER button after selecting 2 Select “Frequency” or “Channel” by using
“EDIT” by pressing or button. or button, and press ENTER
The information of the current channel will button.
show on the screen. 3 Select “Frequency” or “Channel” by
using button, and press or
button.
It starts to search the broadcasting
automatically.
If the broadcasting is found during
searching, it stops to search.
If you want to stop searching, press
STOP button.

Fine Tuning

4-2 Select the channel you want to modify If the captured signal is not good, you can tune
the channel fine.
by pressing CHANNEL - or CHANNEL +
button. 1 Select “Fine Tuning” by using or button.
2 Tune the channel fine by pressing or
button.
Each time or button is pressed, the
channel frequency decreases or increases by
50KHz.

48 Using the Setup Menu

Downloaded from www.Manualslib.com manuals search engine

 Using the Setup Menu

Decoder 2 Select a preset station to swap using

or button, and press button.
If the current channel is scrambled, requiring a
Canal+ decoder connected to the EURO A/V IN
connector, set this to “On”.

Delete
If you want to delete a captured channel, select
“Delete” by using or button, press ENTER
button.

4-3 Press ENTER button after selecting

“OK” using button if all the settings 3 Select the position to insert it using
are correct. or button, and press button.
4 If you want to swap more presets, repeat
NOTE
step 2 to 3.
This feature is available only when the recorder is set to the
5 Press ENTER button after selecting “OK”
TV mode.
using button if it is finished.

5
CHANNEL SWAPPING NOTE
(If there is no captured channel, this feature
This feature is available only when the recorder is set to the
is not available.) TV mode.
This feature lets you swap the channel
assignments of different programs. This is so

6
that you can group together station presets TIMER RECORDING
which naturally go together. See section “Timer Recording”.
1 Press ENTER button after selecting

7
“SWAP” by pressing or button. COUNTRY SELECTION
Press ENTER button after selecting your
country using or button.

Using the Setup Menu 49

Downloaded from www.Manualslib.com manuals search engine
 Using the Setup Menu

Video ( ) 3
P-SCAN/HDMI OUTPUT
When viewing Progressive Scan TV via
Y/Pb/Pr connector, set to “P-Scan/HDMI”.
When you also watch the TV via HDMI, set
to “P-Scan/HDMI”. (This feature is not
available when “EURO AV output” is set to
RGB.)

4
SCREEN SAVER
If a bright picture does not move for a long
time, the TV may be damaged. If this state is
continued on longer than 5 minutes, the
screen saver works when ON is selected.
The screen saver protects the CRT (Cathode
1
VIDEO OUTPUT FORMAT
Ray Tube) from damage by displaying a
Set up Video Output Format according to moving DVD logo continuously on the screen.
type supported by your TV or monitor.
If your TV is for PAL, set to “PAL”. If your TV
is for NTSC, set to “NTSC”.
NOTE
The monitor screen of a projector or projection TV is easily

2
TV ASPECT RATIO burned out if a static picture is displayed for a long time. Be
careful not to allow the monitor screen to be burned out
If you have a widescreen TV, select the “16:9
when you set the SCREEN SAVER mode to “OFF”.
Wide” setting. The widescreen DVD disc is
shown using the full screen area. When
playing the DVD disc recorded in
conventional format(4:3), the settings on your
TV will determine how the material is
presented. (See the manual that came with
your TV for details on what options are
available).
If you have a conventional TV, choose either
“4:3 Letter Box” or “4:3 Pan Scan”.
In Letter Box mode, the widescreen DVD
disc is shown with black bars at the top and
bottom of the screen. Pan Scan chops the
sides off widescreen material to make it fit
the 4:3 screen (so even though the picture
looks larger on the screen, you are actually
seeing less of the movie).

NOTE
Some disc will not allow you to change the aspect ratio.

50 Using the Setup Menu

Downloaded from www.Manualslib.com manuals search engine

 Using the Setup Menu

Audio ( ) (This menu is not Language ( )

available when a disc is in the
recorder.)

1
OSD LANGUAGE
This item is used to select the language for
On-Screen Display messages that will be
1
ANALOG OUTPUT
(Not available to change) displayed on the TV screen. When your
desired language is selected, all OSD
messages are displayed in the selected
2
DIGITAL (SPDIF) OUTPUT
language.
● RAW (Bit Stream) : The original audio

stream recorded on the disc is outputted

2
AUDIO LANGUAGE
through the digital audio out connector.
● LPCM : The decoded audio stream is
Set this value to the preferred audio
language. If an audio language is selected,
outputted through the digital audio out
whenever you start playing a new disc, the
connector.
selected audio language is played(if the
selected language is contained in the disc).

3
LPCM OUTPUT
You only need to make this setting if you
3
SUBTITLE LANGUAGE
connected this recorder to an AV amplifier (or
Set this value to the preferred subtitle
other component) using the digital audio
language. If a subtitle language is selected,
output. If your AV amplifier (or other
whenever you start playing a new disc, the
connected component) is compatible with
selected subtitle language is played(if the
high sampling rate audio (96KHz), set to
selected language is contained in the disc).
“LPCM 96KHz”, otherwise set to “LPCM 48KHz”.

4
DISC MENU LANGUAGE
Set this value to the preferred disc menu
language. If a disc menu language is
selected, whenever you start playing a new
disc, the selected disc menu language is
played(if the selected language is contained
in the disc).

Using the Setup Menu 51

Downloaded from www.Manualslib.com manuals search engine
 Using the Setup Menu

Clock ( ) General ( )

1 1
Automatic clock setting Parental Lock
Some TV channels broadcast time signals This function is to disable the playing of
together with the program. This recorder can specified DVD discs that are unsuitable for
use these signals to set the clock children. There are a total of 8 levels. If the
automatically. level is 8, the contents of the disc are suitable
for adult. If the level is 1, the contents of the
1 Press ENTER button after selecting
disc are suitable for children.
“Date-Time Setting” by using or
Used to adjust the level of parental lock.
button.
Once selected, whenever you play a disc,
2 Press ENTER button after selecting the selected rating level is compared to the
“Auto”. level on the disc. If the level you selected is
3 Press ENTER button after selecting greater than the level of the disc, you may
“Program” by using button. play the loaded disc. If not, you may not play
the disc. To set appropriate rating level, do
4 Select the preset channel that broadcasts the following instructions.
a clock signal, and press ENTER button.
1 Press ENTER button after selecting
the proper rating level by using
2
Manual clock setting
or button.
If no station in your area are broadcasting
The password window will be displayed
time signals, you can set the clock manually.
on TV screen.
1 Press ENTER button after selecting
2 Enter the current password in 4 digits by
“Date-Time Setting” by using or
using 0 to 9 button, then press ENTER
button.
button.
2 Press ENTER button after selecting If you have not changed the password,
“Manual”. enter 0, 0, 0, 0.
3 Enter the date & time by using 0 to 9 3 Press ENTER button to confirm after
or , , , , ENTER button. selecting “OK” by using button.
Use 0 to 9 , button to change the
value in the highlighted field.
Use , button to move from one field
to another.

52 Using the Setup Menu

Downloaded from www.Manualslib.com manuals search engine

 Using the Setup Menu

2 6
PREVIEW TYPE
CHANGE PASSWORD
You can select the preview type of the title on
1 Press ENTER button after selecting the HDD title list.
“Change Password”.
The password window appears on TV ● Static : It shows the preview with a still
screen. picture.
● Dynamic : It shows the preview with

moving pictures.

7
HDD to DIsc Copy Option
When copying from HDD to DVD, you can
select the copying mode.

● Fit to Disc : The recording quality is

automatically adjusted so that the selected
titles fit on to the space available on the
2 Enter the current password in 4 digits by disc.
using 0 to 9 button, and press button. ● High Speed : The selected titles is copied

3 Enter the new password in 4 digits by at the same recording quality as the
using 0 to 9 button, and press button. original.
● Highest Speed : The selected titles is

4 Re-enter the new password for verify, and copied at the specified recording quality in
press button. real-time. (Note that although you copy at a
5 Press ENTER button after selecting higher quality setting than the original, the
“OK”. copy will not be better quality than the
The password will be changed. original.)

3
FACTORY RESET
Returns the DVD Recorder back to factory
default settings.
1 Press ENTER button after selecting
“Factory Reset” by pressing button.
A pop-up window appears on TV screen.
2 Press ENTER button after selecting
“OK”.

4
EURO AV OUTPUT
Set to “YCbCr” to view in component video
via Y/Cb/Cr connector. When using AV Euro
connector RGB signal, set to “RGB”.

5
DECODER
If you want to watch the scrambled channels,
requiring a Canal+ decoder connected to the
EURO AV IN connector, set this to “ON”.

Using the Setup Menu 53

Downloaded from www.Manualslib.com manuals search engine
 Using the Setup Menu

HDD ( )

1
Timeshift buffer length
When doing the timeshift recording, you can
select the capacity of HDD buffer in which a
TV program is stored temporarily.

2
Timeshift buffer mode.

● Refresh : The content of the buffer is

erased upon changing the TV channel.
● Preserve : The content of the buffer is

maintained though the TV channel is

changed.

3
Hard disc Info
It shows the information on HDD.

4
Space Management

● Automatic : when the HDD is full, the

recorder will overwrite un-protected titles.
● Manual : when the HDD is full, the recorder

does not overwirte and it asks for erasing

some titles to allow further recording.

5
Format HDD
You can erase all programs on HDD.

6
Erase optical disc
You can erase all programs on disc.
(This function is available only when the
recorder is set to the external AV mode or
the TV mode.)

54 Using the Setup Menu

Downloaded from www.Manualslib.com manuals search engine

 Additional Information

Specifications

DVD, CD-DA, CD, CD-R/CD-RW,

Supported disc types
DVD±R/RW, DVD-R/RW
Supported video formats MPEG-1, MPEG-2, MPEG-4, JPEG
TV system PAL / SECAM
Power requirements AC 100 V-240 V, 50/60 Hz
General
Power consumption 45 W
Weight 4.5 kg
Dimensions 420(W) x 44(H) x 336(D) mm
Operating temperature 5°C to 35°C
Operating humidity 10 % to 75 % (no condensation)
Recording format DVD VIDEO
Recording
Recordable media DVD±R, DVD±RW, HDD(160GB)
Programs 8 Programs
Timer Clock Quartz lock (24-hour digital display)
Power off memory Approx. 1 hour 30 min.
AV connector input / output x 1 This connector provides the video and audio
Euro AV connectors
signals for connection to a compatible color
(21-pin connector) AV connector output x 1 TV or monitor.
Y (luminance) 1.0 Vp-p (75 Ω)
S-Video Input / Output level
C (color) 0.286 Vp-p (75 Ω)
input / output
Input x 1, Output x 1 S-VIDEO jack
Video Input / Output level 1.0 Vp-p (75 Ω)
input / output Input x 2, Output x 1 RCA jack
Input/
Component Y: 1.0 Vp-p (75 Ω)
Output Output level (Y, Cb/Pb, Cr/Pr)
video output Cb/Pb, Cr/Pr : 0.7 Vp-p (75 Ω)
Audio Output level 2 Vrms (1 kHz, 0 dB)
input / output Input (L/R) x 2, Output (L/R) x 1 RCA jack
Optical digital output x 1 Optical digital jack
Digital audio output
Coaxial digital output x 1 RCA jack
DV input / output IEEE 1394 standard 4 pin
USB input USB 1.1 4 pin
HDMI output Type A x 1 480p / 576p
Frequency response 4 Hz to 44 kHz (DVD fs: 96 kHz)
S/N ratio 100 dB
Audio characteristics
Dynamic range 95 dB
Total harmonic distortion 0.03 %
Audio/Video cable 1
RF Cable 1
Scart Cable 1
Accessories
Remote control unit 1
"AA" size batteries 2
Operating Instructions 1
Note : The specifications and design of this product are subject to change without notice, due to improvement.

Additional Information 55
Downloaded from www.Manualslib.com manuals search engine
 Additional Information

Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with
this component, check the points below. Sometimes the trouble may lie in another component. Inspect the
other components and electrical appliances being used. If the trouble cannot be rectified after checking the
items below, ask your nearest authorized service center or your dealer to carry out repair work.

Problem Solution
The disc is ejected automatically after • Dirty or damaged disc
loading.
Disc not seated properly in the disc • Align the disc properly.
guide.
• If the region number on a DVD-Video disc does not match the number on the
Incompatible region number.
player, the disc cannot be used.
• Allow time for condensation to evaporate. Avoid using the recorder near an air-
Condensation inside the recorder.
conditioning unit.
Disc is loaded upside down. • Reload the disc with the label side face up.
• Switch the power off once using the front panel STANDBY/ON button and then
Picture playback stops and the
switch on again using the front panel STANDBY/ON button.
operation buttons cannot be used.
• Disconnect the power plug and reinsert it back into the wall.
• Some settings can be changed while a disc is playing, but are not effective
New settings made in the Setup screen
until the disc is stopped then restarted.
menus while a disc is playing are
• This is not a malfunction. Make the same setting when the recorder is stopped.
ineffective.
• When the power is cut due to power failure or by unplugging the power cord,
Settings are canceled.
settings will be canceled.
• Incorrect video connections. Check that connections are correct and that plugs
are inserted fully.
• TV/monitor or AV amplifier settings are incorrect. Check the instruction manual
of the connected equipment.
No picture / No color
• The Component output menu is set to progressive but your TV/monitor is not
compatible with progressive scan.
• Reconnect the recorder to your TV using a composite or S-Video cord and set
the TV to appropriate input.
• The type of the disc is wrong, it's not a DVD±RW or DVD±R disc.
The DVD recorder cannot record. • The disc is recorded fully.
• The DVD±R has been finailized.
Screen is stretched or aspect does not • The TV aspect ratio setting in the Setup menu is incorrect. Set the TV aspect
change. ratio option to match the TV/monitor you’re using.
• This recorder is compatible with Macro-Vision System copy guard. Some discs
Picture disturbance during playback or
include a copy prevention signal, and when this type of disc is played back,
dark.
stripes etc., may appear on some sections of the picture depending on the TV.

56 Additional Information

Downloaded from www.Manualslib.com manuals search engine

 Additional Information

Problem Solution
• The remote control is too far from the recorder, or the angle with the remote
The remote control doesn't seem to sensor is too wide.
work. Use the remote within its operating range.
• The batteries are exhausted. Put in new batteries.
Some DVD discs do not output digital audio.
• Switch your amplifier to the recorder’s analog outputs.
Dirt, dust, etc. on the disc.
• Clean the disc.
Interconnects are not fully inserted into the terminals (or are not connected).
• Check that all interconnects are firmly inserted.
Dirty or oxidized plugs/terminals.
• Clean the plugs/terminals.
No audio, or audio is distorted. Incorrect audio cable connection.
• Check the audio connections.
Recorder’s output is connected to the amplifier's phono (turntable) inputs.
• Connect to any set of inputs except phono.
The disc is paused.
• Press PLAY button to exit the pause mode.
Incorrect amplifier settings.
• Check that the volume is turned up ,that the speakers are on, the input function
set correctly, etc.
Incorrect Audio menu settings.
The analog audio is OK, but there • Make sure that the Digital Audio Out setting is set to LPCM or RAW.
appears to be no digital audio signal. Check that the LPCM or RAW settings are suitable for your amplifier
-check the amp’s instruction manual.
Noticeable difference in DVD and CD • DVDs and CDs use different recording methods. This is not a malfunction.
volume.
• If this unit is connected to a non-DTS compatible amplifier or decoder using a
digital audio cable, please connect to a DTS compatible amplifier or decoder.
If you do not do this, noise will be output if you try and play a DTS disc.
No DTS audio output.
• If this unit is connected to a DTS-compatible amplifier or decoder using a
digital audio cable, check the amplifier settings, and that the cable is properly
connected.

NOTE
• Static electricity or other external influences may cause malfunctioning of this unit. In this case, unplug the power cord and then
plug back in. This will usually reset the unit for proper operation. If this does not correct the problem, please consult your
nearest service center.

Additional Information 57
Downloaded from www.Manualslib.com manuals search engine
Downloaded from www.Manualslib.com manuals search engine
Downloaded from www.Manualslib.com manuals search engine
Downloaded from www.Manualslib.com manuals search engine