HATER

Power Off: To turn the marker off, press and hold the power button until 2. Hold the trigger down; then turn the marker on. Once the LED flashes many
the LED goes through a rainbow power down sequence. Please note that colors, release the trigger.
3. Tap the trigger until the LED turns yellow.
this particular rainbow LED sequence does NOT indicate that you’re
4. Hold down the trigger until the LED goes blank.
entering the programming menu. 5. Tap the trigger 5 times.

PAINTBALL Programming 6. Once the LED flashes many colors, turn the marker off.
The bottom dip switch must be in the OFF position in order to enter the To set the max ROF to 15 bps.
programming menu. If the bottom dip switch is ON, “tournament lock” will 1. Turn the marker off.
“HATRED Ultralite Frame Board” be enabled and the user will be unable to program the marker. 2. Make sure the top dipswitch (dipswitch 1) is in the ON/UP position.
3. Hold the trigger down; then turn the marker on. Once the LED flashes many
Instruction Manual To enter the programming menu, hold the trigger down and THEN turn the colors, release the trigger.
SOFTWARE REVISION 3 marker on. The LED will inform the user that the programming mode has 4. Tap the trigger until the LED turns blue.
5. Hold down the trigger until the LED goes blank.
Features: been accessed by flashing several colors rapidly.
6. Tap the trigger 15 times.
• Designed from the ground up for all DM4/5/C Ultralite Frame, 7. Once the LED flashes many colors, turn the marker off.
Proto Ultralite Frame, DM6, DM7, and DM8 markers. LED Color Setting Default Adjustable Dip Switch Settings:
• The first ever paintball circuit board with a fully integrated Setting Range Switch UP DOWN
wireless transceiver! Purple Fire Mode 1 1-22
• Fully compatible with all SYMBIO wireless products.
1 ROF Cap ON ROF Cap OFF
Green Debounce 5 ms 1-50 ms (top)
• Includes 22 firing modes including fully customizable ramp
modes. Red Dwell 18 ms 5-35 ms 2 Tournament Programming
• Proprietary multi-tasking algorithms continuously monitor all Blue Max ROF 20 cps 10-35 cps (bottom) Lock Mode
trigger and eye events to ensure that all pulled shots register Teal AMB 1 ms 1-60 ms
and are processed. Yellow Eye Delay 4 ms 1-20 ms
• TEN TIMES faster than the top-ranked competitor! This Eye Sensor Operation:
White Wireless 1 1-32
translates to 900,000 more operations per second than When the HATRED Board is powered on, the eyes are enabled by default.
Address To disable the eyes, press and hold the eye button on your marker.
anyone else.
• Fully adjustable ABS features add to the marker’s dwell to Flickering ABS 10 ms 1-20 ms ÆWhen the eyes are disabled (blinking red LED), your ROF will default to
eliminate that pesky first shot drop-off. Purple the user programmed global ROF cap.
• Anti-mechanical bounce (AMB) algorithms solve the problem Flickering Ramp 9 bps 6-15 bps ÆWhen there is an EYE FAULT (blinking blue LED), your ROF will
of physical switch bounce. No need to worry when the refs Green Activation automatically default to 15 cps.
pull that old slow trigger pull trick on your gun. Flickering Ramp Percent 10% 1-20
• A “forced shot” feature allows the user to clear the marker of LED Representation:
Red (10-200%) Solid Blue Eyes on; Paint in breach.
eye faults.
Flickering Reset Defaults n/a n/a Blinking Blue Eyes on w/ blocked/dirty error.
• Instant on feature. After all, you wanna play now! Solid Red Eyes on; No paint in breach.
• Instantaneous battery status.
Blue Blinking Red Eyes disabled.
• Tournament lock feature allows the user to “lock out” the 1.) Pulling and releasing the trigger will allow the user to toggle through Firing Modes:
programming mode in order to meet specific field/tournament the different programming options. (Please note the firing mode order on the back of the HATRED box does not
guidelines. 2.) Once the desired setting/LED color is reached, pull and hold the correspond the actual order.)
Installation: trigger to select that setting. The LED will then go blank. 1. Semi Auto/NPPL – 1 trigger pull = 1 shot fired.
MAKE SURE THE MARKER IS NOT CONNECTED TO AN AIR 3.) Once the LED goes blank, pull the trigger for the desired setting. 2. PSP Mode – The first three shots are semi auto. On the 4th shot,
SOURCE AND DOES NOT HAVE PAINTBALLS IN THE BREACH For example, if the user wishes to set the debounce to 2, he or she the gun will shoot in 3 shot bursts. This burst mode will continue as
DURING INSTALLATION!!!!!! must pull the trigger two times. long as the trigger is being pulled. After a one second delay of
ÆIf the user wants to view their current value for a particular trigger inactivity, the 3 shots semi-auto sequence will restart.
1. Remove the screws that secure the grips. This will expose the setting, he or she need only to continue holding the trigger in after ÆThe global ROF cap must be set to 15 bps to comply with PSP
board. the setting is selected from the menu. The software will then blink rules.
2. Carefully remove the frame from your marker. back the user’s current value for that particular setting. 3. NXL – The first three shots are semi auto. On the 4th shot, the user
3. Unplug the eye and solenoid connectors from the board. 4.) The software will indicate that the new value has successfully been may hold in the trigger and the gun will shoot in full auto until the
4. Remove the two mounting screws and then remove the old entered by blinking the value back to the user then rapidly flashing trigger is released. After a one second delay of trigger inactivity,
circuit board. the LED through a spectrum of colors. the 3 shots semi-auto sequence will restart.
5. Carefully place the new HATRED board into your frame. ÆAs the software blinks back the new setting, the user may abort ÆThe global ROF cap must be set to 15 bps to comply with NXL
Make sure your buttons and microswitch align correctly before this process by simply clicking the trigger once. The new settings rules.
bolting the HATRED board to your frame. will still be saved. 4. Millennium – Ramping mode specifically designed for Europe’s
6. Reattach frame. Be very careful not to pinch any of your 5.) After a setting has been changed, the user may change another Millennium Series.
eye or solenoid wires between the gun body and circuit option or power the gun off to save the settings. 5. Ramping – Uses a linear ramping algorithm to increase your rate of
board! NOTE: All “programming clicks” correspond exactly to their settings. If fire. You can choose when you want your marker to start ramping
7. Plug in your eye and solenoid wires into the HATRED board. you want to cap the ROF at 15, pull the trigger 15 times. If the user sets and how fast your marker will ramp.
8. Install fresh 9v battery. Make sure the positive terminal the value too low (2 cps ROF cap for example), the software will ÆThe ramp deactivation is always 2 bps lower than the ramp
(smaller terminal) is closest to your power and eye buttons! automatically default to the lowest accepted value. The inverse is also activation.
9. Replace grips. true for user inputs which are beyond the adjustable range. ÆEach “programming click” corresponds to a 10% increase in
10. Power on and play! Programming Examples: ramping speed. Eg: 1 click = 10%, 10 clicks = 100%, 20 clicks =
200%
To set the firing mode to PSP mode. ÆThe ramping percentage and ramp activation settings in the
Power: 1. Turn the marker off.
programming menu are GLOBAL settings. Any other firing mode
2. Hold the trigger down; then turn the marker on. Once the LED flashes many
Power On: The HATRED board comes equipped with an Instant On colors, release the trigger. which has a ramping subroutine will use the ramp activation and
feature. Simply press the power button (top button) and your marker will 3. Tap the trigger until the LED turns purple. percentages as dictated by the programming menu.
instantly power on. You will see a flickering GREEN or RED led. The 4. Hold down the trigger until the LED goes blank. 6. Full Automatic – The gun will shoot in full automatic for as long as
GREEN indicates a good battery and the RED means replace the battery 5. Tap the trigger two times. you hold down the trigger.
as soon as possible. Regardless of GREEN/RED battery indication, your 6. Once the LED flashes many colors, turn the marker off. 7. Auto Response – The marker will fire once when the trigger is
marker WILL REGISTER YOUR FIRST TRIGGER PULL! Please be pulled and once when the trigger is released. This is essentially a
careful! To set the eye delay to 5 ms. 100% ramping mode with a 0 bps activation.
1. Turn the marker off.
 8. PSP Style Ramping – The first three pulls are semi auto. On the Each and every HATRED gun board broadcasts that gun’s current rate of The HATRED gun board is warranted free from any and all manufacturing
4th shot, the marker will fire in ramping mode. After a one second fire with every wireless transmission. Simply, the faster you shoot, the defects or software bugs for the lifetime of the product. Warranties are
delay of trigger inactivity, the three shot semi-auto will restart. faster the SYMBIO loader board will load paintballs – an industry first. non-transferable.
9. PSP Style Auto Response - The first three pulls are semi auto. The ROF transmissions allow your loader to infer EXACTLY how fast your
On the 4th shot, the marker will fire in Auto Response mode. After a marker is shooting and load paintballs accordingly. Your SYMBIO will Problems caused by customer negligence are not covered under
one second delay of trigger inactivity, the three shot semi-auto will never starve your marker and simultaneously will never overfeed and warranty. “Negligence” includes, but may not be limited to, using batteries
restart. smash brittle paint. other than a single Alkaline 9V, breaking components off the board, and
10. PSP Breakout Mode – The first trigger pull is full auto then the other improper usage.
marker will convert to PSP mode. The REVISION 2 HATRED gun board will send a wireless LOAD command on
11. Laning Mode – The first three trigger pulls are semi auto; the next every shot fired –and- on every trigger pull. If your eyes are on with no paint in If you need repair or support, please contact first by phone at
three trigger pulls are full auto; then, the marker converts to semi- the breech and you pull the trigger, the HATRED will assume you are trying to 317.354.5201 or email at [email protected] .
automatic. fill up the feedstack and will send a wireless LOAD command in an attempt to HATER PAINTBALL LLC
12. Fast Start Mode - The first three trigger pulls are semi auto; the do so. This feature enables you run your loader dry and then refill without 2752 Michigan Avenue / Unit Four
next 100 trigger pulls are Auto Response; then, the marker converts starving your marker. Kissimmee, Florida 34744
to semi-automatic. Definitions: United States
13. Semi/Auto Response Transition – The first three pulls are semi 317-354-5201 (p)
auto; the gun then converts to Auto Response mode. Debounce – The HATRED’s debounce algorithm assists in eliminating
unwanted shots caused by “trigger noise,” while simultaneously ensuring that 317-203-0719 (f)
14. Semi/Ramping Transition – The first three shots are semi auto; [email protected]
the marker then converts to ramping mode. every pull is read. If the marker has intermittent or continuous “full auto” like
fire, increase the debounce setting. www.haterpaintball.com
15. Semi/Full Auto Transition – The marker will shoot an unlimited
number of shots in semi auto as long as the trigger pulls are all Dwell – Dwell is the amount of time that the solenoid is “charged.” A dwell that
LESS than 8bps. Once 8 bps is achieved, the marker will convert is too low may result in a gun that doesn’t fire, is inconsistent and/or has drop
to full auto. off. If the dwell is set too high, the overall rate of fire will decrease and the
16. Ramping/Semi Transition – For the first 300 pulls, the marker will marker may become less air efficient. The factory default of 18ms should
be in ramping mode; after the 300th pull, the marker will convert to suffice for almost all DYE markers.
semi auto. Eye Delay – The eye delay is the amount of time the gun will pause after
17. Full Auto/Ramping/Semi Transition- The first pull is full auto; the sensing a ball before it will fire. The stock eye delay of 4 ms is a conservative
next 300 pulls are ramping; then the marker will convert to semi setting. On most guns, the Eye Delay can be lowered until the user
auto. experiences chopping. When using an agitated loader, the eye delay should be
18. Semi/Full Auto/Ramping Transition- The first 10 pulls are semi set to 5 ms or higher. The higher the eye delay, the slower the marker and less
auto; the next three pulls are full auto; the marker then locks into chance of paint breakage.
ramping mode. ABS – The Anti-Bolt Stick feature increases the dwell of the marker’s first shot
19. Two Shot Burst – For every trigger pull, the marker will fire two after a period of inactivity. The ABS feature assists in eliminating first shot
paintballs. drop-off. The higher the ABS, the “harder” the marker’s first shot.
20. Three Shot Burst – For every trigger pull, the marker will fire three AMB – Anti-Mechanical Bounce feature assists the user in eliminating
paintballs. mechanical bounce. Mechanical bounce is caused by the marker recoiling.
21. Four Shot Burst – For every trigger pull, the marker will fire four Increasing the AMB will assist in tuning your marker to pass those pesky slow
paintballs. pull tests.
22. Musket Ball Mode – This is essentially a dwell ramp mode. The EXTREMELY IMPORTANT. The AMB software in the HATRED Software
user must hold in the trigger to “charge” their marker. The gun Release 3 is different from any other AMB algorithm on the market. The AMB
actually fires on the trigger release. When the trigger is first pulled value which the user sets is actually the KICK IN TIME for the placement of a
and held down, the software will start at the user set dwell (18 ms AMB window in the firing cycle. While the user sets the initiation value, the
default) minus 10 ms. Over the course of five seconds, the software automatically calculates the correct duration of the window itself. The
software will add 2 ms of dwell up to the user set dwell for every faster the gun’s firing cycle, the lower the AMB time. 25 ms is an ideal time for
second the trigger is continually depressed. After 5 seconds, the most DYE and Proto markers. If your gun has bounce issues, please increase
marker will be fully charged. and decrease your AMB values by 2 ms increments until your AMB window is
ÆIf the user just pulls the trigger and immediately releases, the positioned correctly in your firing cycle and your bounce issues are eliminated.
paintball probably won’t make it out of the barrel; if the user holds A higher AMB value does not mean the gun will bounce less!
the trigger for 3 seconds, the velocity of the paintball will be Note: Setting your AMB value to 1 will disable AMB altogether.
extremely low, etc. Max ROF – This feature allows the user to cap the maximum rate of fire of their
marker. Some leagues, such as the PSP, require that guns not exceed 15.4
Wireless Operation: bps. The Max ROF feature is adjustable from 10-35 bps in 1 bps increments.
The hardware on the HATRED board was developed with two prime concerns: Note: Dip switch 1 must be ON for your ROF cap to be enabled.
overall speed and wireless expandability. Your HATRED board comes IMPORTANT: We highly recommend leaving your Max ROFat 20 cps or below.
equipped with a high-performance wireless transceiver which is fully capable of Anything higher than this CAN blow your solenoid. Hater Paintball simply
an almost unlimited array of wireless applications. The board you just cannot be responsible for damaged solenoids.
purchased is wholly capable of computer and PDA synchronization, wireless Forced Shot – If the eyes are enabled, but the breach is empty, the user may
“intellifeeds,” and statistical transmission and analyses. force a shot by holding in the trigger for approximately one second. This
feature is useful in the event that a ball has been pushed into the detents and is
The HATRED board comes pre-loaded with SYMBIO SYNC loader board unreadable by the eyes. A forced shot will clear the breach and load the next
software. To synchronize your HATRED board with your SYMBIO loader paintball as normal.
board: Ramp Activation – This feature sets your ramp activation for all ramping
1.) Make sure your SYMBIO is fully powered off. Press and continue modes. Your ramping will not kick in until this activation point has been
to hold the SYMBIO loader board’s button in until the LED flashes reached. A lower ramp activation “kicks in” easier than a high activation. Note:
white. Release the button; the LED should now be solid white. The ramp deactivation is always two bps less than the ramp activation.
2.) Enter the programming menu on your HATRED gun board and Ramp Percentage: This applies to all ramping modes and tells your gun how
scroll to the WIRELESS ADDRESS SELECT (white LED). fast to ramp. The higher the setting, the faster your marker will shoot.
3.) Set your HATRED gun board to the desired wireless address. Your Factory Default Reset: To reset all settings back to their factory defaults, go
SYMBIO will pulse to signify acceptance of the change and then into the programming menu and select the flickering blue LED. Click the trigger
enter normal wireless mode. once to reset everything back to its factory default value.
Warranty: