PIPE CONNECTIONS ACC.

DIN 11864 / FORM A

Aseptic-Screw-Connections acc. DIN 11864-1................................................................130
Aseptic-Male Union acc. DIN 11864-1............................................................................131
Aseptic-Female Union acc. DIN 11864-1.........................................................................132
Aseptic-Blind-Male Union acc. DIN 11864-1...................................................................133
Aseptic-Blind-Female Union acc. DIN 11864-1................................................................134
Aseptic-Flange-Connections acc. DIN 11864-2 Incl. O-Ring.............................................135
Aseptic-Flange with Groove acc. DIN 11864-2.................................................................136
Aseptic-Lapped Flange acc. DIN 11864-2.......................................................................137
Aseptic-Blind-Flange with Groove acc. DIN 11864-2........................................................138
Aseptic-Blind-Lapped Flange acc. DIN 11864-2..............................................................139
Aseptic-Clamp-Connections DIN 11864-3.......................................................................140
Aseptic-Grooved Clamp acc. DIN 11864-3......................................................................141
Aseptic-Lapped Clamp acc. DIN 11864-3.......................................................................142
Aseptic-Blind-Grooved Clamp acc. DIN 11864-3.............................................................143
Aseptic-Blind-Lapped Clamp acc. DIN 11864-3...............................................................144
Aseptic-O-Ring acc. DIN 11864 / Form A........................................................................145
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Screw-Connections acc. DIN 11864-1

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic-Screw-Connections acc. DIN 11864-1 incl. O-ring

Valid standards: DIN 11864-1 with weld-on end acc. DIN 11866, Series B (ISO 1127)
Nut acc. DIN 11851
Material: Stnr.-W. 1.4435 BN2 & 1.4301 (Fe < 0.5%) acc. EN 10088-1
EPDM Ethylene-Propylene-Diene rubber
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.4 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B, FDA-Certificate,
Certificate acc. EN 10204-2.2
Option: Electropolishing
Remarks: *All pressures can be used up to 140°C when using suitable elastomers.
Technical contents are subject to change

Dimensions for Aseptic-Screw-Connections acc. DIN 11864-1

Sizes A AD ID L O-Ring *Max pressure Item No.

resistance
DIN 11864-1 with weld-on ends acc. DIN 11866, Reihe B (ISO 1127)
ISO DN 8 38.0 13.5 10.3 76.0 EPDM 40 bar 222.010.008
ISO DN 10 44.0 17.2 14.0 76.0 EPDM 40 bar 222.010.010
ISO DN 15 54.0 21.3 18.1 78.0 EPDM 40 bar 222.010.015
ISO DN 20 63.0 26.9 23.7 78.0 EPDM 40 bar 222.010.020
ISO DN 25 70.0 33.7 29.7 88.0 EPDM 40 bar 222.010.025
ISO DN 32 78.0 42.4 38.4 88.0 EPDM 25 bar 222.010.032
ISO DN 40 92.0 48.3 44.3 90.0 EPDM 25 bar 222.010.040
ISO DN 50 112.0 60.3 56.3 114.0 EPDM 25 bar 222.010.050
ISO DN 65 127.0 76.1 72.1 117.0 EPDM 25 bar 222.010.065
ISO DN 80 148.0 88.9 84.3 122.0 EPDM 25 bar 222.010.080

130 All lengths in millimeters (if not specified differently).

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Male Union acc. DIN 11864-1

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic Male union acc. DIN 11864-1

Valid standards: DIN 11864-1 with weld-on end acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150°C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.4 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change

Dimensions for Aseptic Male Union acc. DIN 11864-1 / Form A

Sizes Threading AD ID L Item No.

DIN 11864-1 with weld-on ends acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 RD 28 x 1/8" 13.5 10.3 41.0 222.011.008
ISO DN 10 RD 34 x 1/8" 17.2 14.0 41.0 222.011.010
ISO DN 15 RD 44 x 1/6" 21.3 18.1 43.0 222.011.015
ISO DN 20 RD 52 x 1/6" 26.9 23.7 43.0 222.011.020
ISO DN 25 RD 58 x 1/6" 33.7 29.7 48.0 222.011.025
ISO DN 32 RD 65 x 1/6" 42.4 38.4 48.0 222.011.032
ISO DN 40 RD 78 x 1/6" 48.3 44.3 49.0 222.011.040
ISO DN 50 RD 95 x 1/6" 60.3 56.3 60.0 222.011.050
ISO DN 65 RD 110 x 1/4" 76.1 72.1 64.0 222.011.065
ISO DN 80 RD 130 x 1/4" 88.9 84.3 64.0 222.011.080

All lengths in millimeters (if not specified differently). 131

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Female Union acc. DIN 11864-1

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic Female union acc. DIN 11864-1

Valid standards: DIN 11864-1 with weld-on end acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150°C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change

Dimensions for Aseptic Female Union acc. DIN 11864-1 / Form A

Sizes A AD ID L Item No.

DIN 11864-1 with weld-on ends acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 21.9 13.5 10.3 39.0 222.012.008
ISO DN 10 27.9 17.2 14.0 39.0 222.012.010
ISO DN 15 35.9 21.3 18.1 40.0 222.012.015
ISO DN 20 42.9 26.9 23.7 41.0 222.012.020
ISO DN 25 48.9 33.7 29.7 47.0 222.012.025
ISO DN 32 54.9 42.4 38.4 47.0 222.012.032
ISO DN 40 66.9 48.3 44.3 48.0 222.012.040
ISO DN 50 84.9 60.3 56.3 62.0 222.012.050
ISO DN 65 98.9 76.1 72.1 61.0 222.012.065
ISO DN 80 118.9 88.9 84.3 68.0 222.012.080

132 All lengths in millimeters (if not specified differently).

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Blind-Male Union acc. DIN 11864-1

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic-Blind-Male union acc. DIN 11864-1

Valid standards: DIN 11864-1 for pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150°C
Version / Surface quality: Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change

Dimensions for Aseptic Blind-Male Union acc. DIN 11864-1 / Form A

Sizes Threading AD SW L Item No.

DIN 11864-1
ISO DN 8 RD 28 x 1/8" 23.0 19.0 24.0 222.013.008
ISO DN 10 RD 34 x 1/8" 28.0 24.0 24.0 222.013.010
ISO DN 15 RD 44 x 1/6" 34.0 30.0 24.0 222.013.015
ISO DN 20 RD 52 x 1/6" 44.0 41.0 24.0 222.013.020
ISO DN 25 RD 58 x 1/6" 53.0 46.0 24.0 222.013.025
ISO DN 32 RD 65 x 1/6" 58.0 50.0 24.0 222.013.032
ISO DN 40 RD 78 x 1/6" 72.0 65.0 24.0 222.013.040
ISO DN 50 RD 95 x 1/6" 87.0 80.0 28.0 222.013.050
ISO DN 65 RD 110 x 1/4" 100.0 95.0 28.0 222.013.065
ISO DN 80 RD 130 x 1/4" 120.0 115.0 30.0 222.013.080
Thread

All lengths in millimeters (if not specified differently). 133

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Blind-Female Union acc. DIN 11864-1

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic-Blind female union acc. DIN 11864-1

Valid standards: DIN 11864-1 for pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150°C
Version / Surface quality: Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change

Dimensions for Aseptic-Blind-Female Union acc. DIN 11864-1 / Form A

Sizes A AD L Item No.

DIN 11864-1
ISO DN 8 21.9 18.0 9.0 222.014.008
ISO DN 10 27.9 24.0 9.0 222.014.010
ISO DN 15 35.9 30.0 10.0 222.014.015
ISO DN 20 42.9 35.0 12.0 222.014.020
ISO DN 25 48.9 41.0 13.0 222.014.025
ISO DN 32 54.9 48.0 13.0 222.014.032
ISO DN 40 66.9 61.0 14.0 222.014.040
ISO DN 50 84.9 79.0 16.0 222.014.050
ISO DN 65 98.9 93.0 16.0 222.014.065
ISO DN 80 118.9 114.0 20.0 222.014.080

134 All lengths in millimeters (if not specified differently).

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Flange-Connections acc. DIN 11864-2
Incl. O-Ring

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic-Flange-Connections acc. DIN 11864-2 incl. O-Ring

Valid standards: DIN 11864-2 with weld-on end acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
EPDM Ethylene-Propylene-Diene rubber
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B, FDA-Certificate
Option: Electropolishing
Remarks: *All pressures can be used up to 140°C when using suitable elastomers.
Torque rating for screws/nuts DN 8 to DN 50: 23 Nm
DN 65 to DN 100: 46 Nm. Technical contents are subject to change

Dimensions for Aseptic-Flange-Connections acc. DIN 11864-2 / Form A

Sizes A AD ID L Screw O-Ring *Max. pressure Item No.

Nut resistance
DIN 11864-2 with weld-on ends acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 54.0 13.5 10.3 80.0 4 x M8 x 30 EPDM 40 bar 222.020.008
ISO DN 10 59.0 17.2 14.0 80.0 4 x M8 x 30 EPDM 40 bar 222.020.010
ISO DN 15 62.0 21.3 18.1 80.0 4 x M8 x 30 EPDM 40 bar 222.020.015
ISO DN 20 69.0 26.9 23.7 80.0 4 x M8 x 30 EPDM 40 bar 222.020.020
ISO DN 25 74.0 33.7 29.7 90.0 4 x M8 x 30 EPDM 40 bar 222.020.025
ISO DN 32 82.0 42.4 38.4 90.0 4 x M8 x 30 EPDM 25 bar 222.020.032
ISO DN 40 88.0 48.3 44.3 90.0 4 x M8 x 30 EPDM 25 bar 222.020.040
ISO DN 50 103.0 60.3 56.3 108.0 4 x M8 x 30 EPDM 25 bar 222.020.050
ISO DN 65 125.0 76.1 72.1 112.0 8 x M10 x 30 EPDM 25 bar 222.020.065
ISO DN 80 137.0 88.9 84.3 116.0 8 x M10 x 35 EPDM 25 bar 222.020.080
ISO DN 100 168.0 114.3 109.7 116.0 8 x M10 x 35 EPDM 10 bar 222.020.100

All lengths in millimeters (if not specified differently). 135

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Flange with Groove acc. DIN 11864-2

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic-Flange with Groove acc. DIN 11864-2

Valid standards: DIN 11864-2 with weld-on end acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150°C
Version / Surface quality: Weld-on ends for orbital-welding
Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change

Dimensions for Aseptic-Flange with Groove acc. DIN 11864-2 / Form A

Sizes A AD ID L S Item No.

DIN 11864-2 with weld-on ends acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 54.0 13.5 10.3 41.5 37.0 222.021.008
ISO DN 10 59.0 17.2 14.0 41.5 42.0 222.021.010
ISO DN 15 62.0 21.3 18.1 41.5 45.0 222.021.015
ISO DN 20 69.0 26.9 23.7 41.5 52.0 222.021.020
ISO DN 25 74.0 33.7 29.7 46.5 57.0 222.021.025
ISO DN 32 82.0 42.4 38.4 46.5 65.0 222.021.032
ISO DN 40 88.0 48.3 44.3 46.5 71.0 222.021.040
ISO DN 50 103.0 60.3 56.3 55.5 85.0 222.021.050
ISO DN 65 125.0 76.1 72.1 57.5 104.0 222.021.065
ISO DN 80 137.0 88.9 84.3 59.5 116.0 222.021.080
ISO DN 100 168.0 114.3 109.7 59.5 146.0 222.021.100

136 All lengths in millimeters (if not specified differently).

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Lapped Flange acc. DIN 11864-2

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic-Lapped Flange acc. DIN 11864-2

Valid standards: DIN 11864-2 with pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150°C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change

Dimensions for Aseptic-Lapped Flange acc. DIN 11864-2 / Form A

Sizes A AD ID L S Item No.

DIN 11864-2 with with pipe connection acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 54.0 13.5 10.3 40.0 37.0 222.022.008
ISO DN 10 59.0 17.2 14.0 40.0 42.0 222.022.010
ISO DN 15 62.0 21.3 18.1 40.0 45.0 222.022.015
ISO DN 20 69.0 26.9 23.7 40.0 52.0 222.022.020
ISO DN 25 74.0 33.7 29.7 45.0 57.0 222.022.025
ISO DN 32 82.0 42.4 38.4 45.0 65.0 222.022.032
ISO DN 40 88.0 48.3 44.3 45.0 71.0 222.022.040
ISO DN 50 103.0 60.3 56.3 54.0 85.0 222.022.050
ISO DN 65 125.0 76.1 72.1 56.0 104.0 222.022.065
ISO DN 80 137.0 88.9 84.3 58.0 116.0 222.022.080
ISO DN 100 168.0 114.3 109.7 58.0 146.0 222.022.100

All lengths in millimeters (if not specified differently). 137

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Blind-Flange with Groove acc. DIN 11864-2

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic Blind-Flange with Groove acc. DIN 11864-2

Valid standards: DIN 11864-2 for pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150°C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change

Dimensions for Aseptic-Blind Flange with Groove acc. DIN 11864-2

Sizes A S L Item No.

DIN 11864-2
ISO DN 8 54.0 37.0 11.5 222.023.008
ISO DN 10 59.0 42.0 11.5 222.023.010
ISO DN 15 62.0 45.0 11.5 222.023.015
ISO DN 20 69.0 52.0 11.5 222.023.020
ISO DN 25 74.0 57.0 11.5 222.023.025
ISO DN 32 82.0 65.0 11.5 222.023.032
ISO DN 40 88.0 71.0 11.5 222.023.040
ISO DN 50 103.0 85.0 11.5 222.023.050
ISO DN 65 125.0 104.0 13.5 222.023.065
ISO DN 80 137.0 116.0 13.5 222.023.080
ISO DN 100 168.0 146.0 15.5 222.023.100

138 All lengths in millimeters (if not specified differently).

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Blind Lapped Flange acc. DIN 11864-2

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic Blind-Lapped Flange acc. DIN 11864-2

Valid standards: DIN 11864-2 for pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150°C
Version / Surface quality: Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change

Dimensions for Aseptic-Blind Lapped Flange acc. DIN 11864-2

Sizes A S L Item No.

DIN 11864-2
ISO DN 8 54.0 37.0 10.0 222.024.008
ISO DN 10 59.0 42.0 10.0 222.024.010
ISO DN 15 62.0 45.0 10.0 222.024.015
ISO DN 20 69.0 52.0 10.0 222.024.020
ISO DN 25 74.0 57.0 10.0 222.024.025
ISO DN 32 82.0 65.0 10.0 222.024.032
ISO DN 40 88.0 71.0 10.0 222.024.040
ISO DN 50 103.0 85.0 10.0 222.024.050
ISO DN 65 125.0 104.0 12.0 222.024.065
ISO DN 80 137.0 116.0 12.0 222.024.080
ISO DN 100 168.0 146.0 14.0 222.024.100

All lengths in millimeters (if not specified differently). 139

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Clamp-Connections acc. DIN 11864-3

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic-Clamp-Connections acc. DIN 11864-3 incl. O-Ring

Valid standards: DIN 11864-3 with pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
EPDM Ethylene-Propylene-Diene rubber
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B, FDA-Certificate
Option: Electropolishing
Remarks: *All pressures can be used up to 140°C when using suitable elastomers.
Torque rating Hexagon-Nut: 5 Nm
Technical contents are subject to change

Dimensions for Aseptic-Clamp-Connections acc. DIN 11864-3 / Form A

Sizes A AD ID Kl L O-Ring *Max. pressure Item No.

resistance
DIN 11864-3 with with pipe connection acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 34.0 13.5 10.3 70.0 76 EPDM 40 bar 222.030.008
ISO DN 10 34.0 17.2 14.0 70.0 76 EPDM 40 bar 222.030.010
ISO DN 15 34.0 21.3 18.1 70.0 78 EPDM 40 bar 222.030.015
ISO DN 20 50.5 26.9 23.7 90.0 78 EPDM 40 bar 222.030.020
ISO DN 25 50.5 33.7 29.7 90.0 88 EPDM 40 bar 222.030.025
ISO DN 32 64.0 42.4 38.4 106.0 88 EPDM 25 bar 222.030.032
ISO DN 40 64.0 48.3 44.3 106.0 90 EPDM 25 bar 222.030.040
ISO DN 50 91.0 60.3 56.3 135.0 114 EPDM 25 bar 222.030.050
ISO DN 65 106.0 76.1 72.1 149.0 117 EPDM 16 bar 222.030.065
ISO DN 80 119.0 88.9 84.3 162.0 122 EPDM 16 bar 222.030.080
ISO DN 100 144.4 114.3 109.7 210.0 130 EPDM 16 bar 222.030.100

140 All lengths in millimeters (if not specified differently).

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Grooved Clamp acc. DIN 11864-3

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic-Grooved Clamp acc. DIN 11864-3

Valid standards: DIN 11864-3 with pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2(Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150°C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change

Dimensions for Aseptic-Grooved Clamp acc. DIN 11864-3 / Form A

Sizes A AD ID L1 L2 Item No.

DIN 11864-3 with pipe connection acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 34.0 13.5 10.3 26.0 39.5 222.031.008
ISO DN 10 34.0 17.2 14.0 26.0 39.5 222.031.010
ISO DN 15 34.0 21.3 18.1 26.0 40.5 222.031.015
ISO DN 20 50.5 26.9 23.7 30.0 40.0 222.031.020
ISO DN 25 50.5 33.7 29.7 30.0 45.5 222.031.025
ISO DN 32 64.0 42.4 38.4 30.0 45.5 222.031.032
ISO DN 40 64.0 48.3 44.3 30.0 46.5 222.031.040
ISO DN 50 91.0 60.3 56.3 40.0 58.5 222.031.050
ISO DN 65 106.0 76.1 72.1 40.0 60.0 222.031.065
ISO DN 80 119.0 88.9 84.3 40.0 62.5 222.031.080
ISO DN 100 144.4 114.3 109.7 40.0 66.5 222.031.100

All lengths in millimeters (if not specified differently). 141

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Lapped Clamp acc. DIN 11864-3

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic-Lapped Clamp acc. DIN 11864-3

Valid standards: DIN 11864-3 with pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150°C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change

Dimensions for Aseptic-Lapped Clamp acc. DIN 11864-3 / Form A

Sizes A AD ID L1 L2 Item No.

DIN 11864-3 with pipe connection acc. DIN 11866, Series B (ISO 1127)
DIN 11864-3 8 34.0 13.5 10.3 26.0 38.0 222.032.008
DIN 11864-3 10 34.0 17.2 14.0 26.0 38.0 222.032.010
DIN 11864-3 15 34.0 21.3 18.1 26.0 39.0 222.032.015
DIN 11864-3 20 50.5 26.9 23.7 30.0 39.0 222.032.020
DIN 11864-3 25 50.5 33.7 29.7 30.0 44.0 222.032.025
DIN 11864-3 32 64.0 42.4 38.4 30.0 44.0 222.032.032
DIN 11864-3 40 64.0 48.3 44.3 30.0 45.0 222.032.040
DIN 11864-3 50 91.0 60.3 56.3 40.0 57.0 222.032.050
DIN 11864-3 65 106.0 76.1 72.1 40.0 58.5 222.032.065
DIN 11864-3 80 119.0 88.9 84.3 40.0 61.0 222.032.080
DIN 11864-3 100 144.4 114.3 109.7 40.0 65.0 222.032.100

142 All lengths in millimeters (if not specified differently).

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Blind-Grooved Clamp acc. DIN 11864-3

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic-Blind-Grooved Clamp with groove acc. DIN 11864-3

Valid standards: DIN 11864-3 for pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150°C
Version / Surface quality: Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change

Dimensions for Aseptic-Blind-Grooved Clamp acc. DIN 11864-3

Sizes A AD L Item No.

DIN 11864-3
ISO DN 8 34.0 25.0 11.5 222.033.008
ISO DN 10 34.0 25.0 11.5 222.033.010
ISO DN 15 34.0 25.0 11.5 222.033.015
ISO DN 20 50.5 42.0 11.5 222.033.020
ISO DN 25 50.5 42.0 11.5 222.033.025
ISO DN 32 64.0 54.0 11.5 222.033.032
ISO DN 40 64.0 54.0 11.5 222.033.040
ISO DN 50 91.0 78.0 11.5 222.033.050
ISO DN 65 106.0 93.0 13.5 222.033.065
ISO DN 80 119.0 104.0 13.5 222.033.080
ISO DN 100 144.4 124.0 15.5 222.033.100

All lengths in millimeters (if not specified differently). 143

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-Blind-Lapped Clamp acc. DIN 11864-3

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic Blind-Lapped Clamp acc. DIN 11864-3

Valid standards: DIN 11864-3 for pipe connection acc. DIN 11866 Series B ISO 1127
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150°C
Version / Surface quality: Ra, internal < 0.8 μm, Ra, external < 1.6 μm
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change

Dimensions for Aseptic-Blind-Lapped Clamp acc. DIN 11864-3

Sizes A AD L Item No.

DIN 11864-3
ISO DN 8 34.0 25.0 11.5 222.034.008
ISO DN 10 34.0 25.0 11.5 222.034.010
ISO DN 15 34.0 25.0 11.5 222.034.015
ISO DN 20 50.5 42.0 11.5 222.034.020
ISO DN 25 50.5 42.0 11.5 222.034.025
ISO DN 32 64.0 54.0 11.5 222.034.032
ISO DN 40 64.0 54.0 11.5 222.034.040
ISO DN 50 91.0 78.0 13.5 222.034.050
ISO DN 65 106.0 93.0 13.5 222.034.065
ISO DN 80 119.0 104.0 13.5 222.034.080
ISO DN 100 144.4 124.0 13.5 222.034.100

144 All lengths in millimeters (if not specified differently).

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]
PIPE CONNECTIONS ACC. DIN 11864 / FORM A
Aseptic-O-Ring acc. DIN 11864 / Form A

Product group: Pipe Connections acc. DIN 11864 / Form A

Description: Aseptic O-Ring acc. DIN 11864 / Form A

Valid standards: DIN 11864 for pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: EPDM Ethylene-Propylene-Diene rubber
Viton® (FEP), Viton® polymerisate made of vinylidene fluorides and hexafluoride propylenes
Permissible sterilization temperature: Viton® (FEP): 150°C, EPDM: 132°C (150°C for a short time)
Version / Surface quality: Surface smooth and nonporous, free of laminar recesses and ridges.
Edges without tears and notches.
Marking: Marking on packing units
Certificates: Incl. Certificate of conformance FDA-21 CFR 177.2600 for gasket materials.
Remarks: Technical contents are subject to change
Viton® is a registered trademark of DuPont Dow Elastomers

Dimensions for Aseptic-O-Ring

Sizes ID S Item No. Item No.

®
Viton /FEP EPDM
DIN 11864 with pipe connection acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 12.0 3.5 222.040.008 222.042.008
ISO DN 10 16.0 3.5 222.040.010 222.042.010
ISO DN 15 20.0 3.5 222.040.015 222.042.015
ISO DN 20 26.0 3.5 222.040.020 222.042.020
ISO DN 25 32.0 5.0 222.040.025 222.042.025
ISO DN 32 40.5 5.0 222.040.032 222.042.032
ISO DN 40 46.5 5.0 222.040.040 222.042.040
ISO DN 50 58.5 5.0 222.040.050 222.042.050
ISO DN 65 73.5 5.0 222.040.065 222.042.065
ISO DN 80 86.5 5.0 222.040.080 222.042.080
ISO DN 100 111.0 5.0 222.040.100 222.042.100

Material resistance: see chapter Tri-Clamp Connections (Page 29)

All lengths in millimeters (if not specified differently). 145

Connectors Verbindungstechnik AG, Zürcherstrasse 53, CH-8317 Tagelswangen, Phone: +41 (0)52 354 68 68, Telefax: +41 (0)52 354 68 60
Catalogue Sterile Components Version CS004, Printed 07/2014, Version 2. More information: www.connectors.ch or email: [email protected]