Scribd
Upload
114 views22 pages

Computation of Various Load Cases For Input To Staad-Pro Model

1. This document provides load case definitions and structural analysis results for the design of de-oiling basins and DAF units. 2. Six load cases are defined - dead loads, live loads, equipment loads, seismic loads in two horizontal and two vertical directions, and wind loads. 3. Analysis results including shear forces, membrane forces, bending moments, and reinforcement requirements are provided from Staad-Pro for plate elements like launder floor slabs and walls. 4. The entire structure was analyzed in Staad-Pro. Manual calculations were done for plate elements based on Staad-Pro results to determine reinforcement.

Uploaded by

sumit_7285
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
114 views22 pages

Computation of Various Load Cases For Input To Staad-Pro Model

1. This document provides load case definitions and structural analysis results for the design of de-oiling basins and DAF units. 2. Six load cases are defined - dead loads, live loads, equipment loads, seismic loads in two horizontal and two vertical directions, and wind loads. 3. Analysis results including shear forces, membrane forces, bending moments, and reinforcement requirements are provided from Staad-Pro for plate elements like launder floor slabs and walls. 4. The entire structure was analyzed in Staad-Pro. Manual calculations were done for plate elements based on Staad-Pro results to determine reinforcement.

Uploaded by

sumit_7285
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 22

Purchaser: Consortium of Contractor:

RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic


VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant:
MECON LIMITED RANCHI BEC, Bhilai

Computation of various Load Cases for input to Staad-Pro model

1) REFERENCE LOAD R1 : All Dead Loads (DL).

Self Weight of all column & beam members & plate elements have been automatically
a)
assigned in Staad-Pro.

b) DL due to stair steps @ 0.25 t/sqm on all waist slabs.

c) DL due to Stair floor finish @ 0.12 t/sqm on all waist slabs.

d) DL due to floor finish on all landings, ladder platforms and pump platform slabs.

e) DL due to ladder pedestal @ 0.14 t/m on beam.

f) DL due to ladder at ladder feet @ 0.2 t each foot for each DAF

g) DL due to handrail, strl. Platform & grating @ 0.3 t/m on wall tops.

2) REFERENCE LOAD R2 : All Live Loads (LL).

a) LL on stair flights, landings, pump & ladder platforms @ 0.4 t/sqm.

b) LL due to dust load on all stair flights, landings, pump & ladder platforms @ 0.05 t/sqm.

c) LL on Flocculator-A/B deck slabs.

d) LL due to dust load on Flocculator-A/B deck slabs.

e) All water loads on floors & walls of all tanks. Water Load
(Mentioned in details in Staad-Pro input) on walls :

3) REFERENCE LOAD R3 : All Equipment Loads (EQL).

a) EQL due to Oil Skimmers @ 0.31 t each.

b) EQL due to Flocculators & Flash Mixers @ 0.3 t each.

c) EQL due to DAF units @ 6 t per leg.

d) EQL due to DAF pumps on beams @ 0.2 t per pump.

4) SEISMIC LOAD : SL(+X), SL(-X), SL(+Z), SL(-Z).

Seismic Load has been defined in accordance with IS:1893-2002 with following considerations:

ZONE 0.16, RF 3, I 1.75, SS 1, ST 1, DM 0.05, DT 3.

5) WIND LOADS : WL(+X), WL(-X), WL(+Z), WL(-Z).

Wind load is declared @ 0.15 t/sqm at 10 m height on all relevant faces of columns, beams and
plates.

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 1 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01 Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant:
MECON LIMITED RANCHI BEC, Bhilai

Various applicable Load Combinations have been used in designing the structure. Refer Staad-
6)
Pro input.

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 2 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01 Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED RANCHI

NOTE: The entire structure including all columns, beams, wall plates, foundation beams and foundation plates have been analyzed and
designed using Staad-Pro. Design outputs including reinforcements for all columns, beams and foundation beams have been directly
obtained from Staad-Pro outputs. All plete elements have been manually calculated in this document based on their respective Staad-
Pro analysis results for reinforcement requirements. The Staad-Pro analysis outputs for all such relevant plate elements are given
below for reference.

Staad-Pro Outputs for all Plate Elements:-

1a) Staad-Pro Output for Launder Floor Slab Plates (150 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SXY Mxy
SX (local) SY (local) Mx MTon- My MTon-
Plate L/C (local) (local) (local) MTon-
N/mm2 N/mm2 m/m m/m
N/mm2 N/mm2 N/mm2 m/m
Max Qx 3072 101 DL+LL 0.026 -0.017 -0.140 -0.080 0.004 -0.015 -0.020 0.022
Min Qx 2919 101 DL+LL -0.049 0.002 -0.156 -0.230 0.023 -0.125 -0.017 -0.003
Max Qy 3075 126 DL+LL+EQL 0.007 0.038 -0.103 -0.082 -0.032 -0.005 -0.058 -0.005
Min Qy 2934 101 DL+LL 0.020 -0.045 -0.117 -0.172 -0.018 -0.032 -0.096 0.040
Max Sx 2930 128 DL+LL+EQL+SL(-X) -0.012 0.001 0.159 -0.087 0.040 -0.013 0.001 -0.001
Min Sx 2927 128 DL+LL+EQL+SL(-X) -0.036 -0.005 -0.207 -0.186 0.048 -0.078 -0.022 -0.031
Max Sy 3101 128 DL+LL+EQL+SL(-X) 0.001 -0.014 -0.127 0.150 0.021 0.009 -0.005 0.004
Min Sy 3088 128 DL+LL+EQL+SL(-X) -0.028 -0.020 -0.157 -0.243 0.006 -0.067 -0.024 -0.034
Max Sxy 2900 128 DL+LL+EQL+SL(-X) -0.009 -0.012 0.015 0.062 0.127 -0.009 -0.009 -0.005
Min Sxy 2932 128 DL+LL+EQL+SL(-X) 0.010 -0.008 -0.036 0.029 -0.147 -0.001 -0.004 0.010
Max Mx 3117 101 DL+LL 0.003 0.003 -0.059 0.028 -0.013 0.029 0.023 0.001
Min Mx 2919 101 DL+LL -0.049 0.002 -0.156 -0.230 0.023 -0.125 -0.017 -0.003
Max My 3067 126 DL+LL+EQL 0.002 0.002 -0.029 0.004 -0.054 0.022 0.028 0.003
Min My 3115 101 DL+LL -0.010 -0.044 -0.121 -0.159 0.025 -0.017 -0.103 -0.027
Max Mxy 3066 126 DL+LL+EQL -0.032 0.021 -0.148 -0.131 0.002 -0.077 -0.042 0.048
Min Mxy 2936 126 DL+LL+EQL -0.024 -0.035 -0.185 -0.175 0.028 -0.057 -0.079 -0.054

1b) Staad-Pro Output for Launder Vertical Wall Plates (150 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SXY Mxy
SX (local) SY (local) Mx MTon- My MTon-
Plate L/C (local) (local) (local) MTon-
N/mm2 N/mm2 m/m m/m
N/mm2 N/mm2 N/mm2 m/m
Max Qx 3072 101 DL+LL 0.026 -0.017 -0.140 -0.080 0.004 -0.015 -0.020 0.022
Min Qx 2919 101 DL+LL -0.049 0.002 -0.156 -0.230 0.023 -0.125 -0.017 -0.003
Max Qy 3075 126 DL+LL+EQL 0.007 0.038 -0.103 -0.082 -0.032 -0.005 -0.058 -0.005
Min Qy 2934 101 DL+LL 0.020 -0.045 -0.117 -0.172 -0.018 -0.032 -0.096 0.040
Max Sx 2930 128 DL+LL+EQL+SL(-X) -0.012 0.001 0.159 -0.087 0.040 -0.013 0.001 -0.001
Min Sx 2927 128 DL+LL+EQL+SL(-X) -0.036 -0.005 -0.207 -0.186 0.048 -0.078 -0.022 -0.031
Max Sy 3101 128 DL+LL+EQL+SL(-X) 0.001 -0.014 -0.127 0.150 0.021 0.009 -0.005 0.004
Min Sy 3088 128 DL+LL+EQL+SL(-X) -0.028 -0.020 -0.157 -0.243 0.006 -0.067 -0.024 -0.034
Max Sxy 2900 128 DL+LL+EQL+SL(-X) -0.009 -0.012 0.015 0.062 0.127 -0.009 -0.009 -0.005
Min Sxy 2932 128 DL+LL+EQL+SL(-X) 0.010 -0.008 -0.036 0.029 -0.147 -0.001 -0.004 0.010
Max Mx 3117 101 DL+LL 0.003 0.003 -0.059 0.028 -0.013 0.029 0.023 0.001
Min Mx 2919 101 DL+LL -0.049 0.002 -0.156 -0.230 0.023 -0.125 -0.017 -0.003
Max My 3067 126 DL+LL+EQL 0.002 0.002 -0.029 0.004 -0.054 0.022 0.028 0.003
Min My 3115 101 DL+LL -0.010 -0.044 -0.121 -0.159 0.025 -0.017 -0.103 -0.027
Max Mxy 3066 126 DL+LL+EQL -0.032 0.021 -0.148 -0.131 0.002 -0.077 -0.042 0.048
Min Mxy 2936 126 DL+LL+EQL -0.024 -0.035 -0.185 -0.175 0.028 -0.057 -0.079 -0.054

2a) Staad-Pro Output for De-Oiling Basin DB80.1A/B Floor Slab Plates (250 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SXY Mxy
SX (local) SY (local) Mx MTon- My MTon-
Plate L/C (local) (local) (local) MTon-
N/mm2 N/mm2 m/m m/m
N/mm2 N/mm2 N/mm2 m/m
Max Qx 3746 128 DL+LL+EQL+SL(-X) 0.338 0.137 0.317 -0.294 -0.212 -0.805 -0.423 -0.067
Min Qx 3964 129 DL+LL+EQL+SL(+Z) -0.339 0.301 0.252 -0.275 0.299 -0.802 -0.442 0.078
Max Qy 3121 130 DL+LL+EQL+SL(-Z) 0.327 0.497 0.213 -0.450 -0.263 -0.854 -0.718 -0.342
Min Qy 3849 129 DL+LL+EQL+SL(+Z) 0.113 -0.619 0.271 -0.499 -0.164 -0.500 -1.054 0.225
Max Sx 3774 130 DL+LL+EQL+SL(-Z) 0.016 -0.010 0.620 -0.234 -0.107 0.156 -0.052 0.009
Min Sx 3389 128 DL+LL+EQL+SL(-X) -0.131 -0.346 -0.315 0.329 -0.194 -0.425 -0.823 -0.057
Max Sy 3673 128 DL+LL+EQL+SL(-X) 0.093 -0.035 -0.058 0.759 0.157 -0.087 0.527 0.121
Min Sy 3849 129 DL+LL+EQL+SL(+Z) 0.113 -0.619 0.271 -0.499 -0.164 -0.500 -1.054 0.225
Max Sxy 3684 128 DL+LL+EQL+SL(-X) -0.007 0.008 0.307 0.235 0.469 -0.018 0.155 0.194
Min Sxy 3458 128 DL+LL+EQL+SL(-X) 0.013 -0.005 0.290 0.228 -0.469 -0.007 0.131 -0.184
Max Mx 3282 101 DL+LL -0.002 -0.001 0.369 0.460 0.023 0.679 0.343 0.021
Min Mx 3905 101 DL+LL -0.236 -0.016 0.325 0.246 -0.080 -1.812 -0.223 -0.041
Max My 3757 109 DL+SL(-Z) -0.041 0.087 0.060 0.482 -0.095 0.215 0.799 -0.177
Min My 3959 101 DL+LL -0.014 -0.233 0.273 0.305 0.087 -0.244 -1.767 -0.210
Max Mxy 3903 101 DL+LL -0.122 0.177 0.250 0.340 -0.023 -0.791 -1.141 0.762
Min Mxy 3958 101 DL+LL -0.171 -0.154 0.360 0.235 0.025 -1.170 -0.830 -0.763

2b) Staad-Pro Output for De-Oiling Basin DB80.1A/B Vertical Wall Plates (400 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SXY Mxy
SX (local) SY (local) Mx MTon- My MTon-
Plate L/C (local) (local) (local) MTon-
N/mm2 N/mm2 m/m m/m
N/mm2 N/mm2 N/mm2 m/m
Max Qx 1572 128 DL+LL+EQL+SL(-X) 0.269 -0.161 0.042 0.041 -0.021 2.730 1.465 -0.654
Min Qx 1566 128 DL+LL+EQL+SL(-X) -0.205 0.119 -1.089 -0.182 0.485 -3.373 -1.159 1.582
Max Qy 1648 128 DL+LL+EQL+SL(-X) -0.052 0.388 0.090 -0.035 -0.045 2.035 2.535 -0.684
Min Qy 1722 128 DL+LL+EQL+SL(-X) 0.237 -0.267 -0.024 0.054 0.079 1.787 3.027 -0.368
Max Sx 2422 128 DL+LL+EQL+SL(-X) 0.000 0.000 0.494 -0.358 0.120 0.000 0.020 0.002
Min Sx 2079 126 DL+LL+EQL -0.034 0.026 -1.336 -0.322 0.650 -1.266 -0.376 0.587
Max Sy 2483 126 DL+LL+EQL 0.000 0.001 -0.041 0.509 0.142 0.004 0.015 -0.001
Min Sy 1888 128 DL+LL+EQL+SL(-X) 0.039 -0.223 0.030 -1.325 0.099 -0.441 -4.182 0.610
Max Sxy 429 126 DL+LL+EQL 0.037 -0.039 -1.253 -0.431 0.825 0.978 0.429 -0.858
Min Sxy 2206 128 DL+LL+EQL+SL(-X) 0.003 -0.001 -0.279 -0.584 -0.731 0.028 0.029 0.012
Max Mx 766 127 DL+LL+EQL+SL(+X) 0.096 0.083 -0.651 0.141 0.209 3.485 -0.261 -0.418
Min Mx 1621 128 DL+LL+EQL+SL(-X) -0.125 0.003 -0.845 0.045 0.353 -3.552 -0.647 1.166

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 3 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED RANCHI
Max My 2524 130 DL+LL+EQL+SL(-Z) -0.010 0.218 -0.079 -0.977 -0.253 0.402 3.771 0.231
Min My 1888 128 DL+LL+EQL+SL(-X) 0.039 -0.223 0.030 -1.325 0.099 -0.441 -4.182 0.610
Max Mxy 870 127 DL+LL+EQL+SL(+X) 0.068 0.207 -0.621 0.129 -0.366 2.386 0.324 1.932
Min Mxy 871 127 DL+LL+EQL+SL(+X) -0.165 0.162 -0.179 -0.590 0.605 1.070 2.499 -2.233

3a) Staad-Pro Output for Flocculators-A/B Floor Slab Plates (250 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SXY Mx My Mxy
SX (local) SY (local)
Plate L/C (local) (local) (local) MTon- MTon- MTon-
N/mm2 N/mm2
N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 5497 130 DL+LL+EQL+SL(-Z) 0.201 0.021 -0.1 0.061 -0.037 -0.678 -0.41 -0.137
Min Qx 5355 127 DL+LL+EQL+SL(+X) -0.502 0.36 -0.322 -0.031 0.073 -1.661 -0.902 0.035
Max Qy 5355 102 DL+LL+SL(+X) -0.498 0.36 -0.323 -0.032 0.073 -1.635 -0.891 0.047
Min Qy 5521 127 DL+LL+EQL+SL(+X) -0.05 -0.641 -0.109 -0.36 -0.187 -1.073 -1.406 -0.24
Max Sx 5355 130 DL+LL+EQL+SL(-Z) -0.124 0.011 0.847 0.31 -0.117 0.234 -0.278 -0.184
Min Sx 5355 108 DL+SL(+Z) -0.227 0.12 -0.579 -0.131 0.016 -1.363 -0.303 -0.168
Max Sy 5521 128 DL+LL+EQL+SL(-X) -0.155 0.145 0.333 0.86 0.265 -0.533 0.709 -0.151
Min Sy 5521 106 DL+SL(+X) 0.037 -0.489 -0.206 -0.518 -0.23 -0.441 -1.159 -0.078
Max Sxy 5341 130 DL+LL+EQL+SL(-Z) 0.009 -0.123 0.343 0.383 0.278 0.071 -0.046 0.295
Min Sxy 5547 128 DL+LL+EQL+SL(-X) -0.029 -0.071 0.407 0.479 -0.296 0.12 -0.297 -0.451
Max Mx 5454 126 DL+LL+EQL 0.031 -0.009 0.161 0.147 -0.013 1.111 0.655 0.025
Min Mx 5355 129 DL+LL+EQL+SL(+Z) -0.405 0.145 -0.41 -0.049 -0.006 -2.06 -0.646 -0.424
Max My 5435 126 DL+LL+EQL -0.012 -0.019 0.152 0.155 0.017 0.689 1.087 -0.035
Min My 5562 130 DL+LL+EQL+SL(-Z) 0.122 -0.423 -0.049 -0.112 0.149 -0.743 -2.045 0.392
Max Mxy 5320 129 DL+LL+EQL+SL(+Z) -0.403 0.256 -0.181 -0.174 0.202 -1.926 -1.181 0.768
Min Mxy 5356 129 DL+LL+EQL+SL(+Z) -0.11 -0.33 -0.138 0.032 -0.185 -1.289 -1.055 -0.801

3b) Staad-Pro Output for Flocculators-A/B Vertical Wall Plates (250 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SX (local) SY (local) SXY Mx My Mxy
Plate L/C (local) (local) (local) MTon- MTon- MTon-
N/mm2 N/mm2 N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 5039 127 DL+LL+EQL+SL(+X) 0.189 -0.121 0.002 -0.255 0.163 0.079 0.714 -0.315
Min Qx 5039 107 DL+SL(-X) -0.160 0.146 -0.056 -0.694 0.242 -0.091 -0.967 0.340
Max Qy 8894 104 DL+LL+SL(+Z) 0.146 0.214 -0.181 -0.062 -0.088 0.775 -0.298 0.216
Min Qy 8875 105 DL+LL+SL(-Z) -0.125 -0.185 -0.141 -0.052 -0.066 -0.696 0.232 -0.219
Max Sx 4527 119 DL+EQL+SL(-X) 0.000 -0.018 0.872 0.187 -0.076 -0.135 0.005 -0.085
Min Sx 4528 127 DL+LL+EQL+SL(+X) -0.058 0.024 -1.251 0.530 -0.192 -0.469 -0.467 -0.061
Max Sy 4512 119 DL+EQL+SL(-X) -0.024 0.009 0.035 0.678 -0.053 -0.046 -0.087 0.079
Min Sy 4509 127 DL+LL+EQL+SL(+X) -0.026 -0.051 0.190 -1.301 -0.174 -0.272 -0.451 -0.034
Max Sxy 4503 127 DL+LL+EQL+SL(+X) -0.054 0.025 -0.833 -0.164 0.513 -0.481 -0.147 0.073
Min Sxy 4515 102 DL+LL+SL(+X) -0.012 -0.030 -0.123 -0.257 -0.524 -0.050 -0.192 -0.018
Max Mx 4277 130 DL+LL+EQL+SL(-Z) 0.060 -0.068 -0.048 0.304 0.080 1.067 0.235 -0.332
Min Mx 4503 129 DL+LL+EQL+SL(+Z) -0.063 0.067 -0.040 0.312 0.062 -1.054 -0.236 0.309
Max My 4283 130 DL+LL+EQL+SL(-Z) 0.006 0.066 0.324 -0.235 -0.005 0.164 1.241 -0.027
Min My 4509 129 DL+LL+EQL+SL(+Z) -0.009 -0.072 0.322 -0.214 0.012 -0.176 -1.228 0.029
Max Mxy 4642 129 DL+LL+EQL+SL(+Z) -0.066 0.051 -0.125 0.021 0.200 -0.721 -0.624 0.529
Min Mxy 4416 130 DL+LL+EQL+SL(-Z) 0.063 -0.047 -0.120 0.010 0.215 0.743 0.618 -0.536

3c) Staad-Pro Output for Flocculators-A/B Baffle Wall Plates (100 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SXY Mx My Mxy
SX (local) SY (local)
Plate L/C (local) (local) (local) MTon- MTon- MTon-
N/mm2 N/mm2
N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 8831 128 DL+LL+EQL+SL(-X) 0.019 -0.006 0.231 0.037 -0.041 0.067 0.011 -0.003
Min Qx 8792 128 DL+LL+EQL+SL(-X) -0.017 -0.005 0.216 0.032 0.036 0.068 0.012 0.004
Max Qy 8822 104 DL+LL+SL(+Z) 0.006 0.014 0.316 0.001 0.148 -0.047 0.005 -0.010
Min Qy 8851 128 DL+LL+EQL+SL(-X) 0.009 -0.014 0.124 -0.014 -0.026 0.049 0.006 -0.001
Max Sx 8801 105 DL+LL+SL(-Z) -0.009 0.002 0.332 0.052 -0.096 -0.052 -0.004 0.005
Min Sx 8825 121 DL+EQL+SL(-Z) -0.002 0.000 -0.173 -0.003 0.004 0.006 0.000 -0.002
Max Sy 8832 128 DL+LL+EQL+SL(-X) -0.004 0.006 0.097 0.090 -0.016 0.008 -0.003 -0.001
Min Sy 8832 106 DL+SL(+X) 0.007 -0.006 -0.064 -0.091 0.041 -0.022 -0.003 0.002
Max Sxy 8822 104 DL+LL+SL(+Z) 0.006 0.014 0.316 0.001 0.148 -0.047 0.005 -0.010
Min Sxy 8801 103 DL+LL+SL(-X) 0.006 0.001 0.314 0.060 -0.097 -0.009 0.002 0.003
Max Mx 8792 128 DL+LL+EQL+SL(-X) -0.017 -0.005 0.216 0.032 0.036 0.068 0.012 0.004
Min Mx 8801 130 DL+LL+EQL+SL(-Z) -0.009 0.002 0.330 0.052 -0.095 -0.052 -0.004 0.005
Max My 8802 128 DL+LL+EQL+SL(-X) -0.013 -0.011 0.160 0.008 0.017 0.058 0.012 0.001
Min My 8841 106 DL+SL(+X) -0.013 -0.001 -0.078 -0.037 -0.036 -0.046 -0.008 -0.001
Max Mxy 8828 128 DL+LL+EQL+SL(-X) 0.010 0.000 0.177 -0.002 -0.006 -0.013 0.001 0.007
Min Mxy 8822 104 DL+LL+SL(+Z) 0.006 0.014 0.316 0.001 0.148 -0.047 0.005 -0.010

3a) Staad-Pro Output for Flash Mixers-A/B Floor Slab Plates (250 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SX (local) SY (local) SXY Mx My Mxy
Plate L/C (local) (local) (local) MTon- MTon- MTon-
N/mm2 N/mm2 N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 5684 102 DL+LL+SL(+X) 0.059 0.011 -0.019 -0.003 -0.080 0.116 0.016 0.059
Min Qx 5698 126 DL+LL+EQL -0.068 0.004 -0.017 -0.052 0.023 -0.223 -0.004 -0.030
Max Qy 5685 127 DL+LL+EQL+SL(+X) -0.044 0.055 0.027 -0.071 0.074 -0.199 0.026 -0.006
Min Qy 5654 127 DL+LL+EQL+SL(+X) -0.008 -0.073 0.050 -0.103 0.009 -0.120 -0.029 -0.089
Max Sx 5668 130 DL+LL+EQL+SL(-Z) -0.017 -0.009 0.251 0.032 -0.036 0.144 -0.025 -0.033
Min Sx 5638 130 DL+LL+EQL+SL(-Z) -0.015 0.006 -0.191 -0.023 -0.053 -0.133 0.038 -0.010
Max Sy 5703 129 DL+LL+EQL+SL(+Z) -0.009 -0.021 0.030 0.233 -0.043 -0.030 0.143 -0.039
Min Sy 5684 128 DL+LL+EQL+SL(-X) -0.056 -0.018 -0.032 -0.166 0.034 -0.104 0.016 0.034
Max Sxy 5716 130 DL+LL+EQL+SL(-Z) -0.012 -0.021 0.044 -0.033 0.149 -0.034 0.005 -0.065
Min Sxy 5688 103 DL+LL+SL(-X) -0.014 -0.004 0.021 0.025 -0.154 0.047 0.055 -0.053
Max Mx 5718 126 DL+LL+EQL 0.018 -0.016 -0.015 0.068 0.004 0.271 0.223 -0.039
Min Mx 5698 127 DL+LL+EQL+SL(+X) -0.066 0.019 0.008 -0.004 0.059 -0.238 -0.085 -0.014
Max My 5640 126 DL+LL+EQL -0.011 0.023 0.074 -0.013 -0.010 0.206 0.302 -0.028
Min My 5705 127 DL+LL+EQL+SL(+X) -0.045 -0.033 -0.022 0.060 -0.009 -0.163 -0.181 -0.069
Max Mxy 5647 130 DL+LL+EQL+SL(-Z) -0.021 0.015 -0.114 -0.064 0.087 -0.046 0.029 0.136
Min Mxy 5672 130 DL+LL+EQL+SL(-Z) 0.018 -0.002 0.001 -0.018 -0.097 0.120 0.187 -0.110

4b) Staad-Pro Output for Flash Mixers-A/B Vertical Wall Plates (250 mm thk.):-

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 4 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED RANCHI
Shear Membrane Bending Moment
SQX SQY SXY Mxy
SX (local) SY (local) Mx MTon- My MTon-
Plate L/C (local) (local) (local) MTon-
N/mm2 N/mm2 m/m m/m
N/mm2 N/mm2 N/mm2 m/m
Max Qx 5215 128 DL+LL+EQL+SL(-X) 0.060 -0.073 -0.180 -0.049 -0.043 0.255 -0.089 -0.053
Min Qx 5211 103 DL+LL+SL(-X) -0.060 0.023 -0.060 -0.029 0.171 -0.427 -0.091 0.132
Max Qy 5196 128 DL+LL+EQL+SL(-X) -0.014 0.133 -0.159 -0.067 -0.070 0.039 0.144 0.177
Min Qy 5215 103 DL+LL+SL(-X) 0.059 -0.073 -0.177 -0.050 -0.042 0.253 -0.093 -0.053
Max Sx 5202 130 DL+LL+EQL+SL(-Z) -0.010 -0.014 0.286 -0.048 -0.012 0.080 -0.108 -0.020
Min Sx 5243 128 DL+LL+EQL+SL(-X) 0.001 0.000 -0.470 0.019 -0.005 -0.001 0.001 -0.005
Max Sy 5240 102 DL+LL+SL(+X) 0.001 -0.001 0.117 0.479 0.142 0.003 -0.005 0.005
Min Sy 5240 119 DL+EQL+SL(-X) 0.001 -0.001 -0.081 -0.724 0.048 -0.002 -0.005 0.005
Max Sxy 5267 128 DL+LL+EQL+SL(-X) 0.001 -0.003 -0.334 -0.318 0.343 0.003 0.007 -0.004
Min Sxy 5212 126 DL+LL+EQL 0.010 -0.003 -0.050 -0.120 -0.266 0.077 0.005 -0.023
Max Mx 5184 128 DL+LL+EQL+SL(-X) 0.035 -0.011 -0.075 0.003 0.047 0.298 0.075 0.043
Min Mx 5211 101 DL+LL -0.051 0.001 -0.098 -0.060 0.203 -0.553 -0.049 0.166
Max My 5186 128 DL+LL+EQL+SL(-X) -0.054 0.015 -0.079 -0.290 0.013 -0.172 0.192 -0.095
Min My 5194 105 DL+LL+SL(-Z) -0.016 -0.035 0.153 -0.214 0.056 -0.006 -0.450 -0.082
Max Mxy 5196 105 DL+LL+SL(-Z) -0.027 0.102 -0.262 -0.020 -0.065 -0.178 0.000 0.245
Min Mxy 5221 101 DL+LL -0.017 -0.045 -0.294 -0.157 0.103 -0.110 -0.175 -0.247

5a) Staad-Pro Output for Flocculators-A/B Deck Slab Plates (100 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SXY Mx My Mxy
SX (local) SY (local)
Plate L/C (local) (local) (local) MTon- MTon- MTon-
N/mm2 N/mm2
N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 5794 101 DL+LL 0.133 0.001 -0.060 -0.084 0.032 -0.546 -0.082 -0.002
Min Qx 5755 126 DL+LL+EQL -0.126 -0.004 -0.035 -0.030 -0.005 -0.524 -0.075 -0.003
Max Qy 5784 101 DL+LL 0.020 0.049 0.014 -0.006 0.064 0.485 0.007 0.001
Min Qy 5765 101 DL+LL 0.020 -0.049 0.021 -0.006 -0.067 0.485 0.007 -0.001
Max Sx 5757 130 DL+LL+EQL+SL(-Z) 0.088 0.008 0.650 0.009 -0.071 -0.429 -0.047 0.011
Min Sx 5728 130 DL+LL+EQL+SL(-Z) 0.097 -0.008 -0.785 -0.130 -0.139 -0.440 -0.051 -0.008
Max Sy 5745 128 DL+LL+EQL+SL(-X) -0.088 -0.008 0.323 0.052 -0.068 -0.413 -0.043 0.008
Min Sy 5805 128 DL+LL+EQL+SL(-X) 0.095 0.010 -0.652 -0.150 0.135 -0.440 -0.051 0.007
Max Sxy 5797 129 DL+LL+EQL+SL(+Z) 0.009 0.000 -0.046 0.004 0.174 0.182 0.005 -0.007
Min Sxy 5749 130 DL+LL+EQL+SL(-Z) 0.009 0.000 -0.043 0.004 -0.177 0.182 0.005 0.007
Max Mx 5736 101 DL+LL 0.023 0.049 -0.182 -0.007 -0.067 0.485 0.007 0.007
Min Mx 5728 101 DL+LL 0.118 -0.012 -0.472 -0.099 -0.082 -0.547 -0.063 -0.010
Max My 5799 101 DL+LL 0.008 0.000 -0.038 0.003 0.092 0.319 0.015 -0.004
Min My 5794 126 DL+LL+EQL 0.133 0.001 -0.061 -0.085 0.032 -0.546 -0.082 -0.003
Max Mxy 5732 126 DL+LL+EQL 0.075 0.006 -0.318 0.002 -0.030 0.070 -0.003 0.018
Min Mxy 5809 126 DL+LL+EQL 0.075 -0.006 -0.312 0.002 0.029 0.070 -0.003 -0.018

5b) Staad-Pro Output for All Waist Slab Plates (175 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SXY Mx My Mxy
SX (local) SY (local)
Plate L/C (local) (local) N/mm2 N/mm2 (local) MTon- MTon- MTon-
N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 7479 127 DL+LL+EQL+SL(+X) 0.644 -0.625 -0.693 -0.255 0.303 1.649 2.112 -1.755
Min Qx 7012 104 DL+LL+SL(+Z) -0.643 0.818 0.304 -0.604 0.345 -2.654 -0.984 0.592
Max Qy 6995 119 DL+EQL+SL(-X) -0.445 0.878 -0.223 -0.742 -0.457 0.200 0.146 -0.799
Min Qy 7062 103 DL+LL+SL(-X) 0.417 -1.116 0.122 -1.344 -0.131 -0.990 -2.361 1.339
Max Sx 7599 129 DL+LL+EQL+SL(+Z) 0.120 -0.343 9.016 2.527 -3.934 -2.529 0.156 0.455
Min Sx 7599 109 DL+SL(-Z) 0.162 0.055 -7.464 -2.150 3.322 2.407 0.173 -0.664
Max Sy 7536 130 DL+LL+EQL+SL(-Z) -0.275 0.078 1.716 9.597 -0.205 -0.266 -3.547 -0.635
Min Sy 7536 108 DL+SL(+Z) 0.171 0.127 -1.575 -8.776 0.393 0.225 2.946 0.459
Max Sxy 6900 128 DL+LL+EQL+SL(-X) -0.021 0.262 -7.284 -2.116 3.346 -0.102 -0.760 0.863
Min Sxy 7599 129 DL+LL+EQL+SL(+Z) 0.120 -0.343 9.016 2.527 -3.934 -2.529 0.156 0.455
Max Mx 7265 118 DL+EQL+SL(+X) 0.339 0.045 -1.035 -1.557 0.593 4.788 1.295 0.438
Min Mx 7265 103 DL+LL+SL(-X) -0.367 -0.032 1.136 1.708 -0.667 -4.726 -1.027 -0.820
Max My 7247 103 DL+LL+SL(-X) 0.165 -0.190 1.002 5.752 0.247 0.567 5.524 -0.576
Min My 7247 118 DL+EQL+SL(+X) -0.062 -0.104 -0.775 -4.544 -0.244 -0.562 -5.151 0.715

Max Mxy 7263 128 DL+LL+EQL+SL(-X) 0.289 -0.724 1.277 3.204 -0.085 -3.205 -4.046 2.633

Min Mxy 7263 106 DL+SL(+X) -0.180 0.376 -1.705 -3.955 0.463 2.997 4.756 -2.412

5c) Staad-Pro Output for All Landing Slab Plates (175 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SXY Mx My Mxy
SX (local) SY (local)
Plate L/C (local) (local) N/mm2 N/mm2 (local) MTon- MTon- MTon-
N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 8544 127 DL+LL+EQL+SL(+X) 9.280 3.162 -4.191 -1.720 -1.113 -0.893 -11.273 -5.698
Min Qx 8534 102 DL+LL+SL(+X) -8.816 3.225 -5.144 -4.005 1.653 0.041 -10.936 5.068
Max Qy 8534 102 DL+LL+SL(+X) -8.816 3.225 -5.144 -4.005 1.653 0.041 -10.936 5.068
Min Qy 8213 129 DL+LL+EQL+SL(+Z) 2.599 -5.026 3.342 0.964 -3.118 0.045 2.067 0.762
Max Sx 8534 119 DL+EQL+SL(-X) 6.563 -2.448 4.748 4.104 -1.632 -0.535 8.387 -3.716
Min Sx 8534 102 DL+LL+SL(+X) -8.816 3.225 -5.144 -4.005 1.653 0.041 -10.936 5.068
Max Sy 8291 130 DL+LL+EQL+SL(-Z) 0.460 3.091 2.527 6.332 1.712 1.615 6.231 -0.498
Min Sy 8073 129 DL+LL+EQL+SL(+Z) 0.299 -3.138 -2.680 -6.653 -0.854 -0.798 -1.626 0.417
Max Sxy 8358 129 DL+LL+EQL+SL(+Z) 0.519 2.614 1.271 2.727 2.825 3.033 -0.152 -1.559
Min Sxy 8213 129 DL+LL+EQL+SL(+Z) 2.599 -5.026 3.342 0.964 -3.118 0.045 2.067 0.762
Max Mx 8544 120 DL+EQL+SL(+Z) -2.304 -0.353 2.427 2.357 1.164 11.830 2.889 2.662
Min Mx 8544 105 DL+LL+SL(-Z) 4.448 1.101 -2.600 -2.605 -1.249 -12.549 -5.402 -3.986
Max My 8544 107 DL+SL(-X) -7.136 -2.415 4.019 1.472 1.028 0.174 8.760 4.374
Min My 8544 127 DL+LL+EQL+SL(+X) 9.280 3.162 -4.191 -1.720 -1.113 -0.893 -11.273 -5.698

Max Mxy 8534 102 DL+LL+SL(+X) -8.816 3.225 -5.144 -4.005 1.653 0.041 -10.936 5.068

Min Mxy 8544 102 DL+LL+SL(+X) 9.280 3.162 -4.202 -1.729 -1.117 -0.894 -11.272 -5.699

5d) Staad-Pro Output for All Ladder Platforms Slab Plates (175 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SXY Mx My Mxy
SX (local) SY (local)
Plate L/C (local) (local) (local) MTon- MTon- MTon-
N/mm2 N/mm2
N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 6249 103 DL+LL+SL(-X) 0.367 -0.143 0.544 0.352 -0.655 0.775 0.657 -0.090
Min Qx 6559 105 DL+LL+SL(-Z) -0.354 0.293 0.221 0.278 0.202 -0.919 -0.203 0.018
CIVIL DESIGN CALCULATION FOR Prep. By: BM
Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 5 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITEDMax
RANCHI
Qy 6352 121 DL+EQL+SL(-Z) -0.228 0.354 -0.325 -0.307 -0.233 0.395 0.770 -0.093
Min Qy 6352 104 DL+LL+SL(+Z) 0.238 -0.412 0.285 0.294 0.235 -0.193 -0.975 0.050
Max Sx 6586 103 DL+LL+SL(-X) -0.018 -0.039 2.102 0.801 -0.113 0.315 0.107 -0.214
Min Sx 6586 118 DL+EQL+SL(+X) -0.098 0.128 -2.032 -0.789 0.110 -0.234 -0.303 0.329
Max Sy 6335 103 DL+LL+SL(-X) -0.033 -0.004 0.880 2.276 0.142 0.110 0.350 -0.216
Min Sy 6335 118 DL+EQL+SL(+X) 0.074 -0.141 -0.865 -2.190 -0.135 -0.289 -0.264 0.370
Max Sxy 6527 103 DL+LL+SL(-X) 0.010 0.036 0.169 0.162 0.849 0.269 0.632 -0.070
Min Sxy 6565 103 DL+LL+SL(-X) -0.035 0.025 0.139 -0.095 -0.843 0.517 0.267 0.160
Max Mx 6529 120 DL+EQL+SL(+Z) 0.191 0.099 0.977 0.309 0.543 0.940 0.500 0.142
Min Mx 6340 104 DL+LL+SL(+Z) -0.196 -0.070 -1.244 -0.093 -0.201 -1.131 -0.352 -0.243
Max My 6308 121 DL+EQL+SL(-Z) -0.094 0.344 -0.238 0.516 0.110 0.456 1.016 0.069
Min My 6308 104 DL+LL+SL(+Z) 0.093 -0.398 0.229 -0.514 -0.087 -0.369 -1.119 -0.250

Max Mxy 6554 102 DL+LL+SL(+X) -0.088 0.152 -1.518 -0.512 0.024 -0.339 -0.350 0.445

Min Mxy 6334 102 DL+LL+SL(+X) -0.030 -0.090 0.067 -0.063 0.396 -0.322 -0.394 -0.450

5e) Staad-Pro Output for DAF Pumps Platform Slab Plates (175 mm thk.):-
Shear Membrane Bending Moment
SQX SQY SXY Mxy
SX (local) SY (local) Mx MTon- My MTon-
Plate L/C (local) (local) (local) MTon-
N/mm2 N/mm2 m/m m/m
N/mm2 N/mm2 N/mm2 m/m
Max Qx 5865 126 DL+LL+EQL 0.103 -0.474 0.149 0.076 -0.076 -0.511 -0.290 0.413
Min Qx 5889 126 DL+LL+EQL -0.250 0.478 0.033 0.209 0.027 0.029 -0.800 -0.043
Max Qy 5889 126 DL+LL+EQL -0.250 0.478 0.033 0.209 0.027 0.029 -0.800 -0.043
Min Qy 5865 126 DL+LL+EQL 0.103 -0.474 0.149 0.076 -0.076 -0.511 -0.290 0.413
Max Sx 5865 126 DL+LL+EQL 0.103 -0.474 0.149 0.076 -0.076 -0.511 -0.290 0.413
Min Sx 5881 134 DL+LL+EQL+WL(-Z) -0.009 0.003 -0.132 -0.110 -0.011 -0.404 0.081 0.003
Max Sy 5889 128 DL+LL+EQL+SL(-X) -0.206 0.406 0.027 0.214 0.024 0.061 -0.590 -0.064
Min Sy 5881 126 DL+LL+EQL 0.005 0.003 -0.127 -0.123 -0.010 -0.398 0.114 0.002
Max Sxy 5888 127 DL+LL+EQL+SL(+X) 0.022 -0.014 -0.064 -0.045 0.040 -0.171 0.092 -0.218
Min Sxy 5865 127 DL+LL+EQL+SL(+X) 0.093 -0.397 0.147 0.080 -0.083 -0.398 -0.158 0.324
Max Mx 5966 126 DL+LL+EQL 0.037 0.008 -0.007 0.001 0.002 0.219 0.086 -0.043
Min Mx 5898 126 DL+LL+EQL -0.024 -0.036 0.063 -0.014 0.034 -0.512 -0.063 0.134
Max My 5992 126 DL+LL+EQL 0.033 0.027 0.001 -0.006 -0.003 0.070 0.219 0.033
Min My 5889 126 DL+LL+EQL -0.250 0.478 0.033 0.209 0.027 0.029 -0.800 -0.043
Max Mxy 5865 126 DL+LL+EQL 0.103 -0.474 0.149 0.076 -0.076 -0.511 -0.290 0.413
Min Mxy 5894 126 DL+LL+EQL -0.007 0.028 -0.076 -0.102 0.029 0.066 -0.201 -0.279

6a) Staad-Pro Output for Fdn. FD1 Plates (Cols. A1, A4, A15, B1, B4, B15) : 2.3 m x 2.3 m x 0.6 m ISOLATED FOOTINGS - 6 NOS.:-
Shear Membrane Bending Moment
SQX SQY SXY Mx My Mxy
Plate L/C (local) (local) SX (local) SY (local) (local) MTon- MTon- MTon-
N/mm2 N/mm2
N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 9401 128 DL+LL+EQL+SL(-X) 1.164 1.102 0.000 0.000 0.000 19.359 14.739 2.636
Min Qx 9082 130 DL+LL+EQL+SL(-Z) -1.154 1.237 0.000 0.000 0.000 15.937 22.091 -5.497
Max Qy 9082 130 DL+LL+EQL+SL(-Z) -1.154 1.237 0.000 0.000 0.000 15.937 22.091 -5.497
Min Qy 9154 129 DL+LL+EQL+SL(+Z) -1.153 -1.235 0.000 0.000 0.000 15.969 22.045 5.539
Max Sx 9437 1 DL -0.008 -0.008 0.000 0.000 0.000 0.184 0.184 -0.098
Min Sx 9437 1 DL -0.008 -0.008 0.000 0.000 0.000 0.184 0.184 -0.098
Max Sy 9437 1 DL -0.008 -0.008 0.000 0.000 0.000 0.184 0.184 -0.098
Min Sy 9437 1 DL -0.008 -0.008 0.000 0.000 0.000 0.184 0.184 -0.098
Max Sxy 9437 1 DL -0.008 -0.008 0.000 0.000 0.000 0.184 0.184 -0.098
Min Sxy 9437 1 DL -0.008 -0.008 0.000 0.000 0.000 0.184 0.184 -0.098
Max Mx 9401 128 DL+LL+EQL+SL(-X) 1.164 1.102 0.000 0.000 0.000 19.359 14.739 2.636
Min Mx 9401 8 SL(+X) -0.349 -0.298 0.000 0.000 0.000 -7.464 -3.653 -2.575
Max My 9082 130 DL+LL+EQL+SL(-Z) -1.154 1.237 0.000 0.000 0.000 15.937 22.091 -5.497
Min My 9082 10 SL(+Z) 0.384 -0.451 0.000 0.000 0.000 -5.317 -10.302 4.993

Max Mxy 9402 129 DL+LL+EQL+SL(+Z) -0.514 0.387 0.000 0.000 0.000 8.533 -0.921 6.779

Min Mxy 9410 130 DL+LL+EQL+SL(-Z) -0.514 -0.388 0.000 0.000 0.000 8.528 -0.910 -6.807

6b) Staad-Pro Output for Fdn. FD2 Plates (Cols. C4, C12, D4, D12) : 3.8 m x 2.3 m x 0.6 m 4-LEGGED COMBINED FOOTING - 1 NO.:-
Bending
Shear Membrane
Moment
SQX SQY SXY Mx My Mxy
SX (local) SY (local)
Plate L/C (local) (local) (local) MTon- MTon- MTon-
N/mm2 N/mm2
N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 9484 128 DL+LL+EQL+SL(-X) 0.103 -0.007 0.000 0.000 0.000 -1.630 -3.161 -0.423
Min Qx 9439 130 DL+LL+EQL+SL(-Z) -0.286 0.111 0.000 0.000 0.000 1.631 1.078 -2.167
Max Qy 9518 128 DL+LL+EQL+SL(-X) 0.085 0.456 0.000 0.000 0.000 0.612 0.509 2.572
Min Qy 9448 128 DL+LL+EQL+SL(-X) 0.084 -0.452 0.000 0.000 0.000 0.606 0.448 -2.530
Max Sx 9537 1 DL 0.006 0.005 0.000 0.000 0.000 -0.072 -0.106 0.014
Min Sx 9537 1 DL 0.006 0.005 0.000 0.000 0.000 -0.072 -0.106 0.014
Max Sy 9537 1 DL 0.006 0.005 0.000 0.000 0.000 -0.072 -0.106 0.014
Min Sy 9537 1 DL 0.006 0.005 0.000 0.000 0.000 -0.072 -0.106 0.014
Max Sxy 9537 1 DL 0.006 0.005 0.000 0.000 0.000 -0.072 -0.106 0.014
Min Sxy 9537 1 DL 0.006 0.005 0.000 0.000 0.000 -0.072 -0.106 0.014
Max Mx 9529 127 DL+LL+EQL+SL(+X) -0.133 -0.055 0.000 0.000 0.000 2.742 0.627 0.616
Min Mx 9532 128 DL+LL+EQL+SL(-X) -0.043 -0.008 0.000 0.000 0.000 -3.169 0.219 1.150
Max My 9478 8 SL(+X) -0.002 0.017 0.000 0.000 0.000 0.036 1.259 0.136
Min My 9478 128 DL+LL+EQL+SL(-X) 0.028 -0.065 0.000 0.000 0.000 0.133 -6.334 -0.438

Max Mxy 9511 129 DL+LL+EQL+SL(+Z) -0.021 0.084 0.000 0.000 0.000 -1.534 -2.530 2.973

Min Mxy 9461 130 DL+LL+EQL+SL(-Z) -0.021 -0.084 0.000 0.000 0.000 -1.550 -2.541 -3.002

6c) Staad-Pro Output for Fdn. FD3 Plates (Cols. D1, D15) : 1.6 m x 1.6 m x 0.4 m ISOLATED FOOTINGS - 2 NOS.:-
Shear Membrane Bending Moment
SQX SQY SX (local) SY (local) SXY Mx My Mxy
Plate L/C (local) (local) (local) MTon- MTon- MTon-
N/mm2 N/mm2 N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 9606 130 DL+LL+EQL+SL(-Z) 0.685 0.738 0.000 0.000 0.000 3.897 6.557 -0.083
Min Qx 9643 127 DL+LL+EQL+SL(+X) -0.909 0.841 0.000 0.000 0.000 8.659 5.298 -1.991
Max Qy 9607 130 DL+LL+EQL+SL(-Z) -0.894 0.900 0.000 0.000 0.000 6.859 7.146 -1.457
Min Qy 9649 129 DL+LL+EQL+SL(+Z) -0.900 -0.904 0.000 0.000 0.000 6.936 7.149 1.472
Max Sx 9663 1 DL -0.010 -0.010 0.000 0.000 0.000 0.126 0.126 -0.069
Min Sx 9663 1 DL -0.010 -0.010 0.000 0.000 0.000 0.126 0.126 -0.069
CIVIL DESIGN CALCULATION FOR Prep. By: BM
Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 6 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITEDMax
RANCHI
Sy 9663 1 DL -0.010 -0.010 0.000 0.000 0.000 0.126 0.126 -0.069
Min Sy 9663 1 DL -0.010 -0.010 0.000 0.000 0.000 0.126 0.126 -0.069
Max Sxy 9663 1 DL -0.010 -0.010 0.000 0.000 0.000 0.126 0.126 -0.069
Min Sxy 9663 1 DL -0.010 -0.010 0.000 0.000 0.000 0.126 0.126 -0.069
Max Mx 9643 127 DL+LL+EQL+SL(+X) -0.909 0.841 0.000 0.000 0.000 8.659 5.298 -1.991
Min Mx 9643 9 SL(-X) 0.406 -0.350 0.000 0.000 0.000 -4.646 -1.871 1.787
Max My 9649 129 DL+LL+EQL+SL(+Z) -0.900 -0.904 0.000 0.000 0.000 6.936 7.149 1.472
Min My 9649 11 SL(-Z) 0.398 0.402 0.000 0.000 0.000 -3.207 -3.397 -1.347

Max Mxy 9648 127 DL+LL+EQL+SL(+X) 0.303 -0.371 0.000 0.000 0.000 0.161 3.521 2.465

Min Mxy 9642 127 DL+LL+EQL+SL(+X) 0.308 0.377 0.000 0.000 0.000 0.179 3.612 -2.418

6d) Staad-Pro Output for Fdn. FD4 Plates (Cols. E7, E9) : 2.95 m x 1.6 m x 0.5 m 2-LEGGED COMBINED FOOTING - 1 NOS.:-
Shear Membrane Bending Moment
SQX SQY SXY Mx My Mxy
SX (local) SY (local)
Plate L/C (local) (local) (local) MTon- MTon- MTon-
N/mm2 N/mm2
N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 9749 9 SL(-X) 0.367 0.131 0.000 0.000 0.000 -6.585 -1.241 -0.958
Min Qx 9749 127 DL+LL+EQL+SL(+X) -0.742 -0.264 0.000 0.000 0.000 12.698 2.531 1.483
Max Qy 9739 127 DL+LL+EQL+SL(+X) -0.614 0.373 0.000 0.000 0.000 10.897 1.734 -2.693
Min Qy 9689 127 DL+LL+EQL+SL(+X) -0.556 -0.339 0.000 0.000 0.000 9.946 1.430 2.447
Max Sx 9763 1 DL -0.015 0.002 0.000 0.000 0.000 0.065 0.072 -0.011
Min Sx 9763 1 DL -0.015 0.002 0.000 0.000 0.000 0.065 0.072 -0.011
Max Sy 9763 1 DL -0.015 0.002 0.000 0.000 0.000 0.065 0.072 -0.011
Min Sy 9763 1 DL -0.015 0.002 0.000 0.000 0.000 0.065 0.072 -0.011
Max Sxy 9763 1 DL -0.015 0.002 0.000 0.000 0.000 0.065 0.072 -0.011
Min Sxy 9763 1 DL -0.015 0.002 0.000 0.000 0.000 0.065 0.072 -0.011
Max Mx 9749 127 DL+LL+EQL+SL(+X) -0.742 -0.264 0.000 0.000 0.000 12.698 2.531 1.483
Min Mx 9749 9 SL(-X) 0.367 0.131 0.000 0.000 0.000 -6.585 -1.241 -0.958
Max My 9749 127 DL+LL+EQL+SL(+X) -0.742 -0.264 0.000 0.000 0.000 12.698 2.531 1.483
Min My 9713 127 DL+LL+EQL+SL(+X) -0.030 -0.033 0.000 0.000 0.000 0.148 -2.833 0.006

Max Mxy 9689 127 DL+LL+EQL+SL(+X) -0.556 -0.339 0.000 0.000 0.000 9.946 1.430 2.447

Min Mxy 9739 127 DL+LL+EQL+SL(+X) -0.614 0.373 0.000 0.000 0.000 10.897 1.734 -2.693

6e) Staad-Pro Output for Fdn. FD5 Plates (Cols. F5, G5, F11, G11) : 2.95 m x 1.6 m x 0.5 m 2-LEGGED COMBINED FOOTINGS - 2 NOS.:-
Shear Membrane Bending Moment
SQX SQY SXY Mx My Mxy
Plate L/C (local) (local) SX (local) SY (local) (local) MTon- MTon- MTon-
N/mm2 N/mm2
N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 9832 129 DL+LL+EQL+SL(+Z) 0.331 -0.456 0.000 0.000 0.000 1.280 7.634 -2.563
Min Qx 9825 129 DL+LL+EQL+SL(+Z) -0.441 -0.764 0.000 0.000 0.000 1.342 13.894 4.205
Max Qy 9914 128 DL+LL+EQL+SL(-X) 0.240 0.823 0.000 0.000 0.000 1.717 11.373 2.529
Min Qy 9824 128 DL+LL+EQL+SL(-X) 0.236 -0.812 0.000 0.000 0.000 1.724 11.503 -2.393
Max Sx 9973 1 DL 0.004 -0.007 0.000 0.000 0.000 -0.008 0.023 0.008
Min Sx 9973 1 DL 0.004 -0.007 0.000 0.000 0.000 -0.008 0.023 0.008
Max Sy 9973 1 DL 0.004 -0.007 0.000 0.000 0.000 -0.008 0.023 0.008
Min Sy 9973 1 DL 0.004 -0.007 0.000 0.000 0.000 -0.008 0.023 0.008
Max Sxy 9973 1 DL 0.004 -0.007 0.000 0.000 0.000 -0.008 0.023 0.008
Min Sxy 9973 1 DL 0.004 -0.007 0.000 0.000 0.000 -0.008 0.023 0.008
Max Mx 9922 128 DL+LL+EQL+SL(-X) 0.190 -0.028 0.000 0.000 0.000 3.290 -1.398 3.733
Min Mx 9868 129 DL+LL+EQL+SL(+Z) -0.072 -0.026 0.000 0.000 0.000 -4.121 0.120 0.275
Max My 9824 129 DL+LL+EQL+SL(+Z) 0.189 -0.639 0.000 0.000 0.000 1.917 14.091 -0.193
Min My 9825 109 DL+SL(-Z) 0.166 0.437 0.000 0.000 0.000 -0.987 -9.325 -3.964

Max Mxy 9925 120 DL+EQL+SL(+Z) -0.128 -0.332 0.000 0.000 0.000 1.369 7.751 4.680

Min Mxy 9815 121 DL+EQL+SL(-Z) -0.128 0.330 0.000 0.000 0.000 1.399 7.695 -4.701

6f) Staad-Pro Output for Fdn. FD6 Plates (Cols. F2, G2, F14, G14) : 1.6 m x 1.6 m x 0.5 m ISOLATED FOOTINGS - 4 NOS.:-
Shear Membrane Bending Moment
SQX SQY SXY Mx My Mxy
SX (local) SY (local)
Plate L/C (local) (local) (local) MTon- MTon- MTon-
N/mm2 N/mm2
N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 10031 128 DL+LL+EQL+SL(-X) 0.755 0.675 0.000 0.000 0.000 11.500 6.113 4.458
Min Qx 10052 118 DL+EQL+SL(+X) -0.779 -0.699 0.000 0.000 0.000 11.712 6.279 4.167
Max Qy 10016 118 DL+EQL+SL(+X) -0.752 0.682 0.000 0.000 0.000 11.074 6.366 -4.010
Min Qy 10052 118 DL+EQL+SL(+X) -0.779 -0.699 0.000 0.000 0.000 11.712 6.279 4.167
Max Sx 10057 1 DL -0.007 -0.007 0.000 0.000 0.000 0.134 0.135 -0.078
Min Sx 10057 1 DL -0.007 -0.007 0.000 0.000 0.000 0.134 0.135 -0.078
Max Sy 10057 1 DL -0.007 -0.007 0.000 0.000 0.000 0.134 0.135 -0.078
Min Sy 10057 1 DL -0.007 -0.007 0.000 0.000 0.000 0.134 0.135 -0.078
Max Sxy 10057 1 DL -0.007 -0.007 0.000 0.000 0.000 0.134 0.135 -0.078
Min Sxy 10057 1 DL -0.007 -0.007 0.000 0.000 0.000 0.134 0.135 -0.078
Max Mx 10052 118 DL+EQL+SL(+X) -0.779 -0.699 0.000 0.000 0.000 11.712 6.279 4.167
Min Mx 10052 103 DL+LL+SL(-X) 0.574 0.489 0.000 0.000 0.000 -9.664 -3.991 -4.432
Max My 10036 129 DL+LL+EQL+SL(+Z) -0.595 -0.621 0.000 0.000 0.000 6.781 8.524 4.419
Min My 10000 104 DL+LL+SL(+Z) 0.373 -0.394 0.000 0.000 0.000 -4.628 -6.066 4.863

Max Mxy 10000 129 DL+LL+EQL+SL(+Z) 0.311 -0.332 0.000 0.000 0.000 -3.965 -5.401 4.896

Min Mxy 10036 130 DL+LL+EQL+SL(-Z) 0.304 0.325 0.000 0.000 0.000 -3.886 -5.310 -4.839

6g) Staad-Pro Output for Fdn. FD7 Plates (Cols.E3, E13, H6, H10, J6, J10) : 1.0 m x 1.0 m x 0.4 m ISOLATED FOOTINGS - 6 NOS.:-
Shear Membrane Bending Moment
SQX SQY SXY Mx My Mxy
SX (local) SY (local)
Plate L/C (local) (local) N/mm2 N/mm2 (local) MTon- MTon- MTon-
N/mm2 N/mm2 N/mm2 m/m m/m m/m
Max Qx 10083 128 DL+LL+EQL+SL(-X) 0.244 -0.199 0.000 0.000 0.000 1.971 0.926 -0.705
Min Qx 10084 129 DL+LL+EQL+SL(+Z) -0.288 -0.313 0.000 0.000 0.000 1.621 2.188 0.788
Max Qy 10064 130 DL+LL+EQL+SL(-Z) -0.277 0.302 0.000 0.000 0.000 1.551 2.137 -0.785
Min Qy 10084 129 DL+LL+EQL+SL(+Z) -0.288 -0.313 0.000 0.000 0.000 1.621 2.188 0.788
Max Sx 10153 1 DL -0.011 -0.011 0.000 0.000 0.000 0.098 0.098 -0.051
Min Sx 10153 1 DL -0.011 -0.011 0.000 0.000 0.000 0.098 0.098 -0.051
Max Sy 10153 1 DL -0.011 -0.011 0.000 0.000 0.000 0.098 0.098 -0.051
Min Sy 10153 1 DL -0.011 -0.011 0.000 0.000 0.000 0.098 0.098 -0.051
Max Sxy 10153 1 DL -0.011 -0.011 0.000 0.000 0.000 0.098 0.098 -0.051

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 7 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITEDMin
RANCHI
Sxy 10153 1 DL -0.011 -0.011 0.000 0.000 0.000 0.098 0.098 -0.051
Max Mx 10083 128 DL+LL+EQL+SL(-X) 0.244 -0.199 0.000 0.000 0.000 1.971 0.926 -0.705
Min Mx 10079 8 SL(+X) -0.111 -0.072 0.000 0.000 0.000 -1.162 -0.262 -0.623
Max My 10084 129 DL+LL+EQL+SL(+Z) -0.288 -0.313 0.000 0.000 0.000 1.621 2.188 0.788
Min My 10084 11 SL(-Z) 0.142 0.163 0.000 0.000 0.000 -0.819 -1.300 -0.662

Max Mxy 10067 130 DL+LL+EQL+SL(-Z) 0.083 -0.058 0.000 0.000 0.000 0.367 -0.219 0.889

Min Mxy 10079 129 DL+LL+EQL+SL(+Z) 0.092 0.068 0.000 0.000 0.000 0.405 -0.162 -0.898

7) Staad-Pro Output of Support Reactions at Node Nos. 3, 9, 15, 43, 44, 45, 68, 69, 92, 93, 120, 121, 122, 123, 172 TO 179, 180, 181, 186, 187 of Superstructure (Signs
are reversed):-
PRIMARY LOAD CASES
L/C NODE FX FY FZ MX MY MZ
1 DL 3 FX -0.093 FY -30.519 FZ -0.087 MX -0.073 MY 0.004 MZ 0.111
1 DL 9 FX -0.072 FY -32.685 FZ 0.001 MX 0.002 MY 0.003 MZ 0.069
1 DL 15 FX -0.08 FY -30.451 FZ 0.089 MX 0.077 MY 0.003 MZ 0.08
1 DL 43 FX 0.014 FY -27.939 FZ -0.093 MX -0.089 MY 0.009 MZ 0.02
1 DL 44 FX 0.121 FY -29.464 FZ -0.014 MX -0.022 MY 0.003 MZ -0.097
1 DL 45 FX 0.037 FY -27.925 FZ 0.076 MX 0.054 MY -0.004 MZ -0.02
1 DL 68 FX 0.044 FY -13.352 FZ -0.034 MX -0.034 MY 0.004 MZ -0.019
1 DL 69 FX 0.057 FY -13.378 FZ 0.023 MX 0.018 MY -0.002 MZ -0.041
1 DL 92 FX 0.055 FY -16.697 FZ -0.038 MX -0.036 MY 0.004 MZ -0.051
1 DL 93 FX 0.064 FY -16.661 FZ 0.028 MX 0.022 MY -0.004 MZ -0.063
1 DL 120 FX 0.113 FY -11.259 FZ -0.018 MX -0.017 MY 0.006 MZ -1.797
1 DL 121 FX 0.113 FY -11.791 FZ 0.011 MX 0.009 MY -0.003 MZ -1.88
1 DL 122 FX 0.03 FY -4.152 FZ -0.022 MX -0.019 MY 0.000 MZ -0.023
1 DL 123 FX 0.034 FY -4.288 FZ 0.021 MX 0.018 MY -0.001 MZ -0.029
1 DL 172 FX -0.117 FY -8.643 FZ 0.031 MX 0.068 MY 0.001 MZ 0.274
1 DL 173 FX -0.111 FY -8.688 FZ -0.007 MX -0.002 MY 0.013 MZ 0.256
1 DL 174 FX -0.099 FY -8.957 FZ 0.017 MX 0.063 MY 0.028 MZ 0.227
1 DL 175 FX -0.108 FY -8.908 FZ 0.007 MX 0.003 MY -0.017 MZ 0.25
1 DL 176 FX -0.043 FY -7.463 FZ -0.019 MX -0.001 MY 0.018 MZ 0.214
1 DL 177 FX -0.035 FY -7.517 FZ 0.027 MX 0.025 MY -0.005 MZ 0.195
1 DL 178 FX -0.023 FY -7.580 FZ 0.031 MX 0.041 MY 0.011 MZ 0.166
1 DL 179 FX -0.031 FY -7.515 FZ -0.024 MX -0.017 MY 0.003 MZ 0.189
1 DL 180 FX -0.006 FY -4.276 FZ -0.012 MX -0.007 MY 0.000 MZ 0.005
1 DL 181 FX -0.005 FY -5.162 FZ 0.012 MX 0.014 MY 0.000 MZ 0.004
1 DL 186 FX 0.006 FY -4.274 FZ -0.012 MX -0.007 MY 0.000 MZ -0.005
1 DL 187 FX 0.005 FY -5.166 FZ 0.012 MX 0.014 MY 0.000 MZ -0.004
2 LL 3 FX -0.01 FY -22.981 FZ -0.011 MX -0.014 MY 0.002 MZ -0.246
2 LL 9 FX 0.014 FY -24.471 FZ -0.006 MX -0.010 MY 0.002 MZ 0.096
2 LL 15 FX -0.004 FY -22.897 FZ 0.003 MX -0.003 MY 0.002 MZ 0.586
2 LL 43 FX -0.01 FY -18.407 FZ -0.011 MX -0.020 MY 0.007 MZ -0.456
2 LL 44 FX 0.021 FY -19.455 FZ -0.014 MX -0.023 MY 0.001 MZ -0.112
2 LL 45 FX 0.002 FY -18.363 FZ -0.007 MX -0.017 MY -0.004 MZ 0.568
2 LL 68 FX 0.005 FY -6.878 FZ -0.003 MX -0.006 MY 0.003 MZ -0.325
2 LL 69 FX 0.012 FY -6.868 FZ -0.006 MX -0.007 MY -0.002 MZ 0.299
2 LL 92 FX 0.032 FY -9.168 FZ -0.003 MX -0.006 MY 0.002 MZ -0.296
2 LL 93 FX 0.036 FY -9.133 FZ -0.006 MX -0.008 MY -0.002 MZ 0.103
2 LL 120 FX 0.01 FY -3.006 FZ -0.009 MX -0.009 MY 0.003 MZ -3.135
2 LL 121 FX 0.008 FY -3.507 FZ 0.002 MX 0.001 MY -0.002 MZ -2.514
2 LL 122 FX 0.009 FY -0.927 FZ -0.006 MX -0.006 MY 0.000 MZ -0.112
2 LL 123 FX 0.011 FY -1.011 FZ 0.005 MX 0.003 MY -0.001 MZ 0.041
2 LL 172 FX -0.06 FY -0.294 FZ 0.022 MX 0.042 MY -0.004 MZ -2.019
2 LL 173 FX -0.06 FY -0.303 FZ -0.016 MX -0.025 MY 0.009 MZ 3.023
2 LL 174 FX -0.052 FY -0.468 FZ 0.002 MX 0.027 MY 0.018 MZ 0.125
2 LL 175 FX -0.057 FY -0.473 FZ 0.004 MX -0.011 MY -0.015 MZ 0.748
2 LL 176 FX -0.055 FY 0.250 FZ 0.005 MX 0.014 MY 0.009 MZ -2.127
2 LL 177 FX -0.055 FY 0.246 FZ -0.003 MX -0.008 MY -0.005 MZ 2.991
2 LL 178 FX -0.046 FY 0.193 FZ 0.004 MX 0.013 MY 0.003 MZ 0.044
2 LL 179 FX -0.05 FY 0.220 FZ -0.002 MX -0.008 MY 0.001 MZ 0.676
2 LL 180 FX 0 FY -1.030 FZ 0.000 MX 0.002 MY 0.000 MZ 0.006
2 LL 181 FX 0 FY -1.529 FZ 0.000 MX 0.002 MY 0.000 MZ 0.005
2 LL 186 FX 0 FY -1.029 FZ 0.000 MX 0.002 MY 0.000 MZ -0.006
2 LL 187 FX 0 FY -1.531 FZ 0.000 MX 0.001 MY 0.000 MZ -0.005
3 EQL 3 FX -0.001 FY -0.211 FZ 0.000 MX 0.000 MY 0.000 MZ 0.044
3 EQL 9 FX 0 FY -0.232 FZ 0.000 MX 0.000 MY 0.000 MZ 0.005
3 EQL 15 FX -0.001 FY -0.210 FZ 0.000 MX 0.000 MY 0.000 MZ 0.028
3 EQL 43 FX -0.001 FY -0.186 FZ 0.000 MX 0.000 MY 0.000 MZ 0.044
3 EQL 44 FX 0 FY -0.213 FZ 0.000 MX 0.000 MY 0.000 MZ -0.002
3 EQL 45 FX -0.001 FY -0.185 FZ 0.000 MX 0.000 MY 0.000 MZ 0.023
3 EQL 68 FX -0.001 FY -0.084 FZ 0.000 MX 0.000 MY 0.000 MZ 0.017
3 EQL 69 FX -0.001 FY -0.083 FZ 0.000 MX 0.000 MY 0.000 MZ 0.005
3 EQL 92 FX -0.001 FY -0.104 FZ 0.000 MX 0.000 MY 0.000 MZ -0.025
3 EQL 93 FX -0.001 FY -0.105 FZ 0.000 MX 0.000 MY 0.000 MZ -0.029
3 EQL 120 FX 0 FY -0.061 FZ 0.000 MX 0.000 MY 0.000 MZ -0.46
3 EQL 121 FX 0 FY -0.063 FZ 0.000 MX 0.000 MY 0.000 MZ -0.535
3 EQL 122 FX 0 FY -0.096 FZ 0.000 MX 0.000 MY 0.000 MZ -0.004
3 EQL 123 FX 0 FY -0.096 FZ 0.000 MX 0.000 MY 0.000 MZ -0.007
3 EQL 172 FX 0.003 FY -5.898 FZ -0.005 MX -0.008 MY 0.001 MZ 0.168
3 EQL 173 FX 0.003 FY -5.897 FZ 0.005 MX 0.008 MY -0.001 MZ 0.169
3 EQL 174 FX 0.005 FY -5.913 FZ 0.001 MX -0.003 MY 0.000 MZ 0.149
3 EQL 175 FX 0.005 FY -5.912 FZ -0.001 MX 0.003 MY 0.000 MZ 0.163
3 EQL 176 FX -0.005 FY -6.029 FZ -0.002 MX -0.006 MY 0.001 MZ 0.164
3 EQL 177 FX -0.004 FY -6.029 FZ 0.002 MX 0.006 MY -0.001 MZ 0.165
3 EQL 178 FX 0 FY -6.019 FZ -0.002 MX -0.006 MY 0.001 MZ 0.144
3 EQL 179 FX 0 FY -6.020 FZ 0.002 MX 0.006 MY -0.001 MZ 0.158
3 EQL 180 FX 0 FY -0.222 FZ 0.002 MX 0.001 MY 0.000 MZ 0
3 EQL 181 FX 0 FY -0.230 FZ -0.002 MX -0.001 MY 0.000 MZ 0
3 EQL 186 FX 0 FY -0.222 FZ 0.002 MX 0.001 MY 0.000 MZ 0
3 EQL 187 FX 0 FY -0.231 FZ -0.002 MX -0.001 MY 0.000 MZ 0
4 WL(+X) 3 FX 1.063 FY 3.175 FZ -0.005 MX -0.014 MY 0.029 MZ 0.001
4 WL(+X) 9 FX 1.19 FY 3.375 FZ -0.012 MX -0.020 MY -0.004 MZ 0.001
4 WL(+X) 15 FX 1.054 FY 3.141 FZ -0.011 MX -0.019 MY -0.038 MZ 0.001

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 8 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED4 RANCHI
WL(+X) 43 FX 1.552 FY 0.601 FZ 0.064 MX 0.061 MY 0.002 MZ 0.001
4 WL(+X) 44 FX 1.335 FY 0.641 FZ 0.013 MX 0.017 MY 0.002 MZ 0.001
4 WL(+X) 45 FX 1.529 FY 0.621 FZ -0.057 MX -0.042 MY -0.012 MZ 0.001
4 WL(+X) 68 FX 0.925 FY -1.681 FZ 0.032 MX 0.033 MY 0.007 MZ 0.001
4 WL(+X) 69 FX 0.913 FY -1.642 FZ -0.021 MX -0.017 MY -0.013 MZ 0.001
4 WL(+X) 92 FX 1.248 FY 1.744 FZ 0.025 MX 0.025 MY 0.010 MZ 0.001
4 WL(+X) 93 FX 1.254 FY 1.771 FZ -0.018 MX -0.013 MY -0.013 MZ 0.001
4 WL(+X) 120 FX 0.802 FY -2.475 FZ 0.007 MX 0.008 MY 0.005 MZ -0.009
4 WL(+X) 121 FX 0.786 FY -3.121 FZ -0.001 MX 0.002 MY -0.003 MZ -0.009
4 WL(+X) 122 FX 0.364 FY -0.010 FZ 0.006 MX 0.007 MY 0.004 MZ 0
4 WL(+X) 123 FX 0.36 FY -0.013 FZ 0.001 MX 0.002 MY -0.004 MZ 0
4 WL(+X) 172 FX 1.632 FY 3.424 FZ -0.137 MX -0.441 MY 0.190 MZ -0.006
4 WL(+X) 173 FX 1.698 FY 3.691 FZ 0.128 MX 0.416 MY -0.200 MZ -0.006
4 WL(+X) 174 FX 1.668 FY 5.076 FZ -0.167 MX -0.466 MY -0.239 MZ -0.012
4 WL(+X) 175 FX 1.728 FY 5.234 FZ 0.161 MX 0.444 MY 0.255 MZ -0.012
4 WL(+X) 176 FX 1.684 FY -4.753 FZ -0.124 MX -0.334 MY -0.014 MZ 0
4 WL(+X) 177 FX 1.753 FY -4.973 FZ 0.114 MX 0.310 MY 0.021 MZ 0
4 WL(+X) 178 FX 1.708 FY -4.213 FZ -0.123 MX -0.331 MY 0.050 MZ -0.008
4 WL(+X) 179 FX 1.772 FY -4.467 FZ 0.114 MX 0.307 MY -0.050 MZ -0.009
4 WL(+X) 180 FX 0.434 FY 1.087 FZ 0.000 MX 0.000 MY 0.002 MZ 0
4 WL(+X) 181 FX 0.434 FY 1.076 FZ 0.000 MX 0.000 MY -0.002 MZ 0
4 WL(+X) 186 FX 0.434 FY -1.087 FZ 0.000 MX 0.000 MY 0.002 MZ 0
4 WL(+X) 187 FX 0.434 FY -1.076 FZ 0.000 MX 0.000 MY -0.002 MZ 0
5 WL(-X) 3 FX -1 FY -2.805 FZ 0.004 MX 0.011 MY -0.029 MZ -1.901
5 WL(-X) 9 FX -1.124 FY -2.974 FZ 0.010 MX 0.016 MY 0.004 MZ -2.039
5 WL(-X) 15 FX -0.993 FY -2.776 FZ 0.009 MX 0.016 MY 0.037 MZ -1.871
5 WL(-X) 43 FX -1.448 FY -0.567 FZ -0.059 MX -0.056 MY -0.003 MZ -2.318
5 WL(-X) 44 FX -1.257 FY -0.596 FZ -0.012 MX -0.016 MY -0.002 MZ -2.162
5 WL(-X) 45 FX -1.429 FY -0.583 FZ 0.052 MX 0.039 MY 0.012 MZ -2.276
5 WL(-X) 68 FX -0.864 FY 1.485 FZ -0.029 MX -0.030 MY -0.008 MZ -1.41
5 WL(-X) 69 FX -0.855 FY 1.452 FZ 0.020 MX 0.016 MY 0.013 MZ -1.387
5 WL(-X) 92 FX -1.165 FY -1.594 FZ -0.023 MX -0.023 MY -0.010 MZ -1.717
5 WL(-X) 93 FX -1.171 FY -1.616 FZ 0.016 MX 0.012 MY 0.012 MZ -1.731
5 WL(-X) 120 FX -0.756 FY 2.207 FZ -0.007 MX -0.007 MY -0.004 MZ -1.731
5 WL(-X) 121 FX -0.742 FY 2.779 FZ 0.001 MX -0.001 MY 0.002 MZ -1.825
5 WL(-X) 122 FX -0.341 FY 0.015 FZ -0.006 MX -0.006 MY -0.003 MZ -0.457
5 WL(-X) 123 FX -0.338 FY 0.021 FZ 0.000 MX -0.001 MY 0.004 MZ -0.453
5 WL(-X) 172 FX -1.548 FY -3.207 FZ 0.121 MX 0.391 MY -0.171 MZ -3.96
5 WL(-X) 173 FX -1.607 FY -3.449 FZ -0.112 MX -0.367 MY 0.179 MZ -4.151
5 WL(-X) 174 FX -1.579 FY -4.673 FZ 0.149 MX 0.414 MY 0.216 MZ -4.114
5 WL(-X) 175 FX -1.633 FY -4.813 FZ -0.143 MX -0.392 MY -0.230 MZ -4.286
5 WL(-X) 176 FX -1.596 FY 4.395 FZ 0.109 MX 0.295 MY 0.011 MZ -3.997
5 WL(-X) 177 FX -1.658 FY 4.591 FZ -0.100 MX -0.272 MY -0.017 MZ -4.191
5 WL(-X) 178 FX -1.616 FY 3.917 FZ 0.108 MX 0.292 MY -0.041 MZ -4.145
5 WL(-X) 179 FX -1.673 FY 4.145 FZ -0.100 MX -0.269 MY 0.041 MZ -4.32
5 WL(-X) 180 FX -0.434 FY -1.087 FZ 0.000 MX 0.000 MY -0.002 MZ -0.553
5 WL(-X) 181 FX -0.434 FY -1.076 FZ 0.000 MX 0.000 MY 0.002 MZ -0.553
5 WL(-X) 186 FX -0.434 FY 1.087 FZ 0.000 MX 0.000 MY -0.002 MZ -0.553
5 WL(-X) 187 FX -0.434 FY 1.076 FZ 0.000 MX 0.000 MY 0.002 MZ -0.553
6 WL(+Z) 3 FX -0.186 FY 4.302 FZ 1.736 MX 3.237 MY 0.021 MZ 1.769
6 WL(+Z) 9 FX 0.001 FY 0.030 FZ 2.582 MX 3.959 MY 0.025 MZ 1.908
6 WL(+Z) 15 FX 0.193 FY -4.235 FZ 1.736 MX 3.237 MY 0.021 MZ 1.745
6 WL(+Z) 43 FX -0.283 FY 4.761 FZ 1.847 MX 3.272 MY 0.048 MZ 2.152
6 WL(+Z) 44 FX 0.001 FY -0.038 FZ 2.580 MX 3.898 MY 0.111 MZ 2.021
6 WL(+Z) 45 FX 0.298 FY -4.760 FZ 1.848 MX 3.273 MY 0.051 MZ 2.117
6 WL(+Z) 68 FX -0.167 FY 3.368 FZ 0.809 MX 1.081 MY 0.008 MZ 1.31
6 WL(+Z) 69 FX 0.175 FY -3.403 FZ 0.808 MX 1.079 MY 0.009 MZ 1.291
6 WL(+Z) 92 FX -0.121 FY 1.998 FZ 0.880 MX 1.182 MY 0.006 MZ 1.599
6 WL(+Z) 93 FX 0.127 FY -2.028 FZ 0.881 MX 1.183 MY 0.007 MZ 1.612
6 WL(+Z) 120 FX -0.018 FY 1.817 FZ 0.847 MX 1.086 MY -0.094 MZ 1.602
6 WL(+Z) 121 FX 0.023 FY -1.673 FZ 0.848 MX 1.086 MY -0.093 MZ 1.686
6 WL(+Z) 122 FX -0.042 FY 1.241 FZ 0.543 MX 0.692 MY 0.009 MZ 0.426
6 WL(+Z) 123 FX 0.045 FY -1.282 FZ 0.542 MX 0.691 MY 0.009 MZ 0.423
6 WL(+Z) 172 FX -0.766 FY 2.747 FZ 1.921 MX 4.703 MY 0.528 MZ 3.721
6 WL(+Z) 173 FX 0.759 FY -2.735 FZ 1.919 MX 4.693 MY 0.535 MZ 3.892
6 WL(+Z) 174 FX -0.056 FY -5.789 FZ 1.935 MX 4.714 MY 0.583 MZ 3.853
6 WL(+Z) 175 FX 0.043 FY 5.732 FZ 1.931 MX 4.703 MY 0.582 MZ 4.008
6 WL(+Z) 176 FX -0.808 FY 5.676 FZ 1.197 MX 2.806 MY 0.665 MZ 3.755
6 WL(+Z) 177 FX 0.8 FY -5.634 FZ 1.191 MX 2.791 MY 0.668 MZ 3.929
6 WL(+Z) 178 FX -0.065 FY -2.593 FZ 1.197 MX 2.806 MY 0.648 MZ 3.882
6 WL(+Z) 179 FX 0.051 FY 2.628 FZ 1.191 MX 2.791 MY 0.654 MZ 4.039
6 WL(+Z) 180 FX 0 FY 1.188 FZ 0.584 MX 0.770 MY -0.001 MZ 0.553
6 WL(+Z) 181 FX 0 FY -1.262 FZ 0.584 MX 0.770 MY -0.001 MZ 0.553
6 WL(+Z) 186 FX 0 FY 1.188 FZ 0.584 MX 0.770 MY 0.001 MZ 0.553
6 WL(+Z) 187 FX 0 FY -1.262 FZ 0.584 MX 0.770 MY 0.001 MZ 0.553
7 WL(-Z) 3 FX 0.186 FY -4.294 FZ -1.735 MX -3.237 MY -0.021 MZ 0.36
7 WL(-Z) 9 FX -0.001 FY -0.048 FZ -2.581 MX -3.959 MY -0.025 MZ -0.005
7 WL(-Z) 15 FX -0.193 FY 4.240 FZ -1.735 MX -3.237 MY -0.021 MZ -0.379
7 WL(-Z) 43 FX 0.283 FY -4.738 FZ -1.847 MX -3.272 MY -0.048 MZ 0.444
7 WL(-Z) 44 FX -0.001 FY 0.019 FZ -2.579 MX -3.898 MY -0.111 MZ -0.005
7 WL(-Z) 45 FX -0.298 FY 4.781 FZ -1.848 MX -3.272 MY -0.051 MZ -0.469
7 WL(-Z) 68 FX 0.167 FY -3.340 FZ -0.809 MX -1.081 MY -0.008 MZ 0.27
7 WL(-Z) 69 FX -0.175 FY 3.430 FZ -0.807 MX -1.079 MY -0.009 MZ -0.285
7 WL(-Z) 92 FX 0.121 FY -2.011 FZ -0.880 MX -1.182 MY -0.006 MZ 0.171
7 WL(-Z) 93 FX -0.127 FY 2.014 FZ -0.881 MX -1.183 MY -0.007 MZ -0.178
7 WL(-Z) 120 FX 0.018 FY -1.819 FZ -0.847 MX -1.086 MY 0.094 MZ 0.347
7 WL(-Z) 121 FX -0.023 FY 1.670 FZ -0.848 MX -1.086 MY 0.093 MZ -0.33
7 WL(-Z) 122 FX 0.042 FY -1.240 FZ -0.543 MX -0.692 MY -0.009 MZ 0.066
7 WL(-Z) 123 FX -0.045 FY 1.281 FZ -0.542 MX -0.691 MY -0.009 MZ -0.07
7 WL(-Z) 172 FX 0.766 FY -2.747 FZ -1.921 MX -4.703 MY -0.528 MZ 2.119
7 WL(-Z) 173 FX -0.759 FY 2.734 FZ -1.919 MX -4.692 MY -0.535 MZ -2.1
7 WL(-Z) 174 FX 0.056 FY 5.788 FZ -1.935 MX -4.713 MY -0.583 MZ 0.261
7 WL(-Z) 175 FX -0.043 FY -5.731 FZ -1.931 MX -4.702 MY -0.582 MZ -0.222
7 WL(-Z) 176 FX 0.808 FY -5.674 FZ -1.197 MX -2.806 MY -0.665 MZ 2.152
7 WL(-Z) 177 FX -0.8 FY 5.633 FZ -1.191 MX -2.791 MY -0.668 MZ -2.132
7 WL(-Z) 178 FX 0.065 FY 2.593 FZ -1.197 MX -2.806 MY -0.648 MZ 0.265
7 WL(-Z) 179 FX -0.051 FY -2.628 FZ -1.191 MX -2.791 MY -0.654 MZ -0.226
7 WL(-Z) 180 FX 0 FY -1.188 FZ -0.584 MX -0.770 MY 0.001 MZ 0
7 WL(-Z) 181 FX 0 FY 1.262 FZ -0.584 MX -0.770 MY 0.001 MZ 0

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 9 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED7 RANCHI
WL(-Z) 186 FX 0 FY -1.188 FZ -0.584 MX -0.770 MY -0.001 MZ 0
7 WL(-Z) 187 FX 0 FY 1.262 FZ -0.584 MX -0.770 MY -0.001 MZ 0
8 SL(+X) 3 FX 3.084 FY 17.643 FZ 0.109 MX 0.207 MY 0.013 MZ -0.36
8 SL(+X) 9 FX 3.431 FY 18.330 FZ 0.156 MX 0.248 MY 0.013 MZ 0.005
8 SL(+X) 15 FX 3.199 FY 17.273 FZ 0.090 MX 0.191 MY 0.013 MZ 0.379
8 SL(+X) 43 FX 5.026 FY 2.932 FZ 0.301 MX 0.341 MY 0.003 MZ -0.444
8 SL(+X) 44 FX 4.025 FY 3.407 FZ 0.136 MX 0.200 MY 0.027 MZ 0.005
8 SL(+X) 45 FX 5.166 FY 2.787 FZ -0.179 MX -0.069 MY 0.016 MZ 0.469
8 SL(+X) 68 FX 2.953 FY -8.870 FZ 0.114 MX 0.117 MY -0.019 MZ -0.27
8 SL(+X) 69 FX 3.043 FY -9.006 FZ -0.083 MX -0.064 MY 0.014 MZ 0.285
8 SL(+X) 92 FX 4.17 FY 7.408 FZ 0.119 MX 0.124 MY 0.041 MZ -0.171
8 SL(+X) 93 FX 4.246 FY 7.608 FZ -0.058 MX -0.031 MY -0.040 MZ 0.178
8 SL(+X) 120 FX 2.332 FY -12.840 FZ -0.001 MX -0.008 MY 0.039 MZ -0.347
8 SL(+X) 121 FX 2.283 FY -15.907 FZ -0.016 MX -0.014 MY -0.006 MZ 0.329
8 SL(+X) 122 FX 1.104 FY 0.235 FZ 0.004 MX 0.001 MY 0.019 MZ -0.066
8 SL(+X) 123 FX 1.13 FY 0.542 FZ 0.004 MX 0.003 MY -0.014 MZ 0.07
8 SL(+X) 172 FX 4.841 FY 13.179 FZ -0.692 MX -2.261 MY 0.881 MZ -2.118
8 SL(+X) 173 FX 5.265 FY 15.169 FZ 0.561 MX 1.837 MY -0.799 MZ 2.099
8 SL(+X) 174 FX 5.113 FY 21.806 FZ -0.844 MX -2.383 MY -0.907 MZ -0.261
8 SL(+X) 175 FX 5.391 FY 22.198 FZ 0.728 MX 1.971 MY 1.152 MZ 0.222
8 SL(+X) 176 FX 5.072 FY -20.252 FZ -0.714 MX -1.913 MY -0.066 MZ -2.151
8 SL(+X) 177 FX 5.515 FY -20.969 FZ 0.470 MX 1.279 MY 0.247 MZ 2.132
8 SL(+X) 178 FX 5.299 FY -17.168 FZ -0.715 MX -1.904 MY 0.438 MZ -0.265
8 SL(+X) 179 FX 5.591 FY -19.099 FZ 0.471 MX 1.270 MY -0.302 MZ 0.226
8 SL(+X) 180 FX 0.19 FY 0.995 FZ 0.059 MX 0.082 MY 0.040 MZ 0
8 SL(+X) 181 FX 0.367 FY 1.260 FZ 0.059 MX 0.082 MY 0.040 MZ 0
8 SL(+X) 186 FX 0.19 FY -0.995 FZ -0.059 MX -0.082 MY 0.040 MZ 0
8 SL(+X) 187 FX 0.367 FY -1.260 FZ -0.059 MX -0.082 MY 0.040 MZ 0
9 SL(-X) 3 FX -3.084 FY -17.643 FZ -0.109 MX -0.207 MY -0.013 MZ -6.379
9 SL(-X) 9 FX -3.431 FY -18.330 FZ -0.156 MX -0.248 MY -0.013 MZ -6.706
9 SL(-X) 15 FX -3.199 FY -17.273 FZ -0.090 MX -0.191 MY -0.013 MZ -6.557
9 SL(-X) 43 FX -5.026 FY -2.932 FZ -0.301 MX -0.341 MY -0.003 MZ -8.033
9 SL(-X) 44 FX -4.025 FY -3.407 FZ -0.136 MX -0.200 MY -0.027 MZ -7.218
9 SL(-X) 45 FX -5.166 FY -2.787 FZ 0.179 MX 0.069 MY -0.016 MZ -8.235
9 SL(-X) 68 FX -2.953 FY 8.870 FZ -0.114 MX -0.117 MY 0.019 MZ -4.857
9 SL(-X) 69 FX -3.043 FY 9.006 FZ 0.083 MX 0.064 MY -0.014 MZ -4.987
9 SL(-X) 92 FX -4.17 FY -7.408 FZ -0.119 MX -0.124 MY -0.041 MZ -5.965
9 SL(-X) 93 FX -4.246 FY -7.608 FZ 0.058 MX 0.031 MY 0.040 MZ -6.101
9 SL(-X) 120 FX -2.332 FY 12.840 FZ 0.001 MX 0.008 MY -0.039 MZ -6.418
9 SL(-X) 121 FX -2.283 FY 15.907 FZ 0.016 MX 0.014 MY 0.006 MZ -6.906
9 SL(-X) 122 FX -1.104 FY -0.235 FZ -0.004 MX -0.001 MY -0.019 MZ -1.525
9 SL(-X) 123 FX -1.13 FY -0.542 FZ -0.004 MX -0.003 MY 0.014 MZ -1.565
9 SL(-X) 172 FX -4.841 FY -13.179 FZ 0.692 MX 2.261 MY -0.881 MZ -13.783
9 SL(-X) 173 FX -5.265 FY -15.169 FZ -0.561 MX -1.837 MY 0.799 MZ -14.96
9 SL(-X) 174 FX -5.113 FY -21.806 FZ 0.844 MX 2.383 MY 0.907 MZ -14.765
9 SL(-X) 175 FX -5.391 FY -22.198 FZ -0.728 MX -1.971 MY -1.152 MZ -15.611
9 SL(-X) 176 FX -5.072 FY 20.252 FZ 0.714 MX 1.913 MY 0.066 MZ -13.952
9 SL(-X) 177 FX -5.515 FY 20.969 FZ -0.470 MX -1.279 MY -0.247 MZ -15.142
9 SL(-X) 178 FX -5.299 FY 17.168 FZ 0.715 MX 1.904 MY -0.438 MZ -14.907
9 SL(-X) 179 FX -5.591 FY 19.099 FZ -0.471 MX -1.270 MY 0.302 MZ -15.764
9 SL(-X) 180 FX -0.19 FY -0.995 FZ -0.059 MX -0.082 MY -0.040 MZ -0.275
9 SL(-X) 181 FX -0.367 FY -1.260 FZ -0.059 MX -0.082 MY -0.040 MZ -0.523
9 SL(-X) 186 FX -0.19 FY 0.995 FZ 0.059 MX 0.082 MY -0.040 MZ -0.275
9 SL(-X) 187 FX -0.367 FY 1.260 FZ 0.059 MX 0.082 MY -0.040 MZ -0.523
10 SL(+Z) 3 FX -1.199 FY 16.711 FZ 5.341 MX 10.791 MY 0.384 MZ 2.344
10 SL(+Z) 9 FX 0.007 FY 0.084 FZ 8.414 MX 13.413 MY 0.348 MZ -0.02
10 SL(+Z) 15 FX 1.222 FY -16.596 FZ 5.341 MX 10.791 MY 0.383 MZ -2.395
10 SL(+Z) 43 FX -1.838 FY 18.627 FZ 4.364 MX 8.639 MY 0.380 MZ 2.891
10 SL(+Z) 44 FX 0.009 FY -0.073 FZ 6.685 MX 10.624 MY 0.467 MZ -0.021
10 SL(+Z) 45 FX 1.879 FY -18.664 FZ 4.364 MX 8.639 MY 0.385 MZ -2.957
10 SL(+Z) 68 FX -1.084 FY 13.025 FZ 1.448 MX 2.139 MY 0.112 MZ 1.753
10 SL(+Z) 69 FX 1.106 FY -13.150 FZ 1.443 MX 2.131 MY 0.114 MZ -1.793
10 SL(+Z) 92 FX -0.681 FY 6.977 FZ 1.907 MX 2.784 MY 0.139 MZ 0.955
10 SL(+Z) 93 FX 0.709 FY -6.903 FZ 1.907 MX 2.784 MY 0.140 MZ -0.989
10 SL(+Z) 120 FX -0.151 FY 6.221 FZ 1.398 MX 1.938 MY -0.068 MZ 1.324
10 SL(+Z) 121 FX 0.162 FY -6.088 FZ 1.400 MX 1.939 MY -0.065 MZ -1.324
10 SL(+Z) 122 FX -0.297 FY 3.389 FZ 0.934 MX 1.273 MY 0.047 MZ 0.424
10 SL(+Z) 123 FX 0.304 FY -3.651 FZ 0.930 MX 1.269 MY 0.046 MZ -0.435
10 SL(+Z) 172 FX -2.407 FY 5.958 FZ 3.815 MX 10.687 MY 1.303 MZ 6.746
10 SL(+Z) 173 FX 2.379 FY -5.863 FZ 3.806 MX 10.645 MY 1.325 MZ -6.671
10 SL(+Z) 174 FX -0.577 FY -16.487 FZ 3.882 MX 10.738 MY 1.594 MZ 1.88
10 SL(+Z) 175 FX 0.528 FY 16.279 FZ 3.865 MX 10.691 MY 1.589 MZ -1.736
10 SL(+Z) 176 FX -2.546 FY 16.600 FZ 1.986 MX 5.845 MY 1.646 MZ 6.852
10 SL(+Z) 177 FX 2.517 FY -16.437 FZ 1.964 MX 5.789 MY 1.658 MZ -6.776
10 SL(+Z) 178 FX -0.618 FY -5.411 FZ 1.987 MX 5.845 MY 1.560 MZ 1.908
10 SL(+Z) 179 FX 0.568 FY 5.540 FZ 1.965 MX 5.789 MY 1.579 MZ -1.764
10 SL(+Z) 180 FX 0.009 FY 0.587 FZ 0.208 MX 0.298 MY -0.004 MZ -0.012
10 SL(+Z) 181 FX -0.009 FY -0.588 FZ 0.207 MX 0.297 MY -0.004 MZ 0.012
10 SL(+Z) 186 FX 0.009 FY 0.564 FZ 0.220 MX 0.315 MY -0.004 MZ -0.012
10 SL(+Z) 187 FX -0.009 FY -0.577 FZ 0.220 MX 0.315 MY -0.004 MZ 0.012
11 SL(-Z) 3 FX 1.199 FY -16.711 FZ -5.341 MX -10.791 MY -0.384 MZ -2.344
11 SL(-Z) 9 FX -0.007 FY -0.084 FZ -8.414 MX -13.413 MY -0.348 MZ 0.02
11 SL(-Z) 15 FX -1.222 FY 16.596 FZ -5.341 MX -10.791 MY -0.383 MZ 2.395
11 SL(-Z) 43 FX 1.838 FY -18.627 FZ -4.364 MX -8.639 MY -0.380 MZ -2.891
11 SL(-Z) 44 FX -0.009 FY 0.073 FZ -6.685 MX -10.624 MY -0.467 MZ 0.021
11 SL(-Z) 45 FX -1.879 FY 18.664 FZ -4.364 MX -8.639 MY -0.385 MZ 2.957
11 SL(-Z) 68 FX 1.084 FY -13.025 FZ -1.448 MX -2.139 MY -0.112 MZ -1.753
11 SL(-Z) 69 FX -1.106 FY 13.150 FZ -1.443 MX -2.131 MY -0.114 MZ 1.793
11 SL(-Z) 92 FX 0.681 FY -6.977 FZ -1.907 MX -2.784 MY -0.139 MZ -0.955
11 SL(-Z) 93 FX -0.709 FY 6.903 FZ -1.907 MX -2.784 MY -0.140 MZ 0.989
11 SL(-Z) 120 FX 0.151 FY -6.221 FZ -1.398 MX -1.938 MY 0.068 MZ -1.324
11 SL(-Z) 121 FX -0.162 FY 6.088 FZ -1.400 MX -1.939 MY 0.065 MZ 1.324
11 SL(-Z) 122 FX 0.297 FY -3.389 FZ -0.934 MX -1.273 MY -0.047 MZ -0.424
11 SL(-Z) 123 FX -0.304 FY 3.651 FZ -0.930 MX -1.269 MY -0.046 MZ 0.435
11 SL(-Z) 172 FX 2.407 FY -5.958 FZ -3.815 MX -10.687 MY -1.303 MZ -6.746
11 SL(-Z) 173 FX -2.379 FY 5.863 FZ -3.806 MX -10.645 MY -1.325 MZ 6.671
11 SL(-Z) 174 FX 0.577 FY 16.487 FZ -3.882 MX -10.738 MY -1.594 MZ -1.88
11 SL(-Z) 175 FX -0.528 FY -16.279 FZ -3.865 MX -10.691 MY -1.589 MZ 1.736
11 SL(-Z) 176 FX 2.546 FY -16.600 FZ -1.986 MX -5.845 MY -1.646 MZ -6.852

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 10 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED11RANCHI
SL(-Z) 177 FX -2.517 FY 16.437 FZ -1.964 MX -5.789 MY -1.658 MZ 6.776
11 SL(-Z) 178 FX 0.618 FY 5.411 FZ -1.987 MX -5.845 MY -1.560 MZ -1.908
11 SL(-Z) 179 FX -0.568 FY -5.540 FZ -1.965 MX -5.789 MY -1.579 MZ 1.764
11 SL(-Z) 180 FX -0.009 FY -0.587 FZ -0.208 MX -0.298 MY 0.004 MZ 0.012
11 SL(-Z) 181 FX 0.009 FY 0.588 FZ -0.207 MX -0.297 MY 0.004 MZ -0.012
11 SL(-Z) 186 FX -0.009 FY -0.564 FZ -0.220 MX -0.315 MY 0.004 MZ 0.012
11 SL(-Z) 187 FX 0.009 FY 0.577 FZ -0.220 MX -0.315 MY 0.004 MZ -0.012
LOAD COMBINATIONS
L/C NODE FX FY FZ MX MY MZ
101 DL+LL 3 FX -0.155 FY -80.251 FZ -0.147 MX -0.130 MY 0.009 MZ 0.232
101 DL+LL 9 FX -0.088 FY -85.734 FZ -0.008 MX -0.013 MY 0.007 MZ 0.111
101 DL+LL 15 FX -0.126 FY -80.023 FZ 0.138 MX 0.111 MY 0.007 MZ 0.163
101 DL+LL 43 FX 0.005 FY -69.520 FZ -0.156 MX -0.163 MY 0.024 MZ 0.095
101 DL+LL 44 FX 0.214 FY -73.378 FZ -0.042 MX -0.067 MY 0.007 MZ -0.149
101 DL+LL 45 FX 0.059 FY -69.433 FZ 0.104 MX 0.055 MY -0.013 MZ 0.005
101 DL+LL 68 FX 0.075 FY -30.345 FZ -0.055 MX -0.060 MY 0.012 MZ -0.002
101 DL+LL 69 FX 0.104 FY -30.368 FZ 0.026 MX 0.016 MY -0.007 MZ -0.054
101 DL+LL 92 FX 0.130 FY -38.797 FZ -0.061 MX -0.062 MY 0.010 MZ -0.114
101 DL+LL 93 FX 0.149 FY -38.690 FZ 0.034 MX 0.022 MY -0.009 MZ -0.139
101 DL+LL 120 FX 0.185 FY -21.397 FZ -0.041 MX -0.039 MY 0.014 MZ -3.386
101 DL+LL 121 FX 0.182 FY -22.947 FZ 0.020 MX 0.015 MY -0.007 MZ -3.623
101 DL+LL 122 FX 0.058 FY -7.619 FZ -0.041 MX -0.038 MY 0.000 MZ -0.041
101 DL+LL 123 FX 0.066 FY -7.948 FZ 0.039 MX 0.032 MY -0.003 MZ -0.054
101 DL+LL 172 FX -0.266 FY -13.405 FZ 0.079 MX 0.165 MY -0.005 MZ 0.662
101 DL+LL 173 FX -0.256 FY -13.487 FZ -0.034 MX -0.041 MY 0.033 MZ 0.638
101 DL+LL 174 FX -0.227 FY -14.139 FZ 0.029 MX 0.136 MY 0.069 MZ 0.565
101 DL+LL 175 FX -0.248 FY -14.072 FZ 0.016 MX -0.012 MY -0.049 MZ 0.62
101 DL+LL 176 FX -0.147 FY -10.819 FZ -0.021 MX 0.019 MY 0.041 MZ 0.567
101 DL+LL 177 FX -0.135 FY -10.906 FZ 0.035 MX 0.025 MY -0.015 MZ 0.541
101 DL+LL 178 FX -0.103 FY -11.081 FZ 0.053 MX 0.081 MY 0.021 MZ 0.465
101 DL+LL 179 FX -0.122 FY -10.943 FZ -0.039 MX -0.036 MY 0.007 MZ 0.519
101 DL+LL 180 FX -0.009 FY -7.960 FZ -0.018 MX -0.008 MY 0.000 MZ 0.007
101 DL+LL 181 FX -0.007 FY -10.036 FZ 0.018 MX 0.023 MY 0.000 MZ 0.006
101 DL+LL 186 FX 0.009 FY -7.954 FZ -0.018 MX -0.008 MY 0.000 MZ -0.008
101 DL+LL 187 FX 0.007 FY -10.045 FZ 0.018 MX 0.023 MY 0.000 MZ -0.006
102 DL+LL+ 3 FX 3.577 FY -43.029 FZ 0.013 MX 0.144 MY 0.023 MZ -7.469
102 DL+LL+ 9 FX 4.047 FY -46.592 FZ 0.182 MX 0.287 MY 0.021 MZ -7.958
102 DL+LL+ 15 FX 3.737 FY -43.291 FZ 0.219 MX 0.318 MY 0.021 MZ -7.738
102 DL+LL+ 43 FX 6.035 FY -52.098 FZ 0.237 MX 0.278 MY 0.023 MZ -9.564
102 DL+LL+ 44 FX 5.002 FY -54.614 FZ 0.130 MX 0.186 MY 0.039 MZ -8.78
102 DL+LL+ 45 FX 6.246 FY -52.202 FZ -0.132 MX -0.039 MY 0.010 MZ -9.878
102 DL+LL+ 68 FX 3.603 FY -34.920 FZ 0.093 MX 0.093 MY -0.013 MZ -5.83
102 DL+LL+ 69 FX 3.735 FY -35.102 FZ -0.079 MX -0.064 MY 0.011 MZ -6.028
102 DL+LL+ 92 FX 5.108 FY -22.147 FZ 0.094 MX 0.099 MY 0.057 MZ -7.249
102 DL+LL+ 93 FX 5.214 FY -21.823 FZ -0.042 MX -0.020 MY -0.056 MZ -7.432
102 DL+LL+ 120 FX 2.946 FY -32.526 FZ -0.035 MX -0.041 MY 0.057 MZ -10.41
102 DL+LL+ 121 FX 2.885 FY -37.445 FZ -0.003 MX -0.005 MY -0.014 MZ -11.186
102 DL+LL+ 122 FX 1.371 FY -5.814 FZ -0.028 MX -0.028 MY 0.023 MZ -1.864
102 DL+LL+ 123 FX 1.409 FY -5.708 FZ 0.035 MX 0.029 MY -0.020 MZ -1.921
102 DL+LL+ 172 FX 5.596 FY 5.091 FZ -0.767 MX -2.582 MY 1.054 MZ -16.01
102 DL+LL+ 173 FX 6.113 FY 7.413 FZ 0.645 MX 2.172 MY -0.932 MZ -17.442
102 DL+LL+ 174 FX 5.954 FY 14.856 FZ -0.990 MX -2.751 MY -1.033 MZ -17.266
102 DL+LL+ 175 FX 6.270 FY 15.380 FZ 0.886 MX 2.356 MY 1.344 MZ -18.237
102 DL+LL+ 176 FX 5.970 FY -32.957 FZ -0.874 MX -2.280 MY -0.046 MZ -16.289
102 DL+LL+ 177 FX 6.509 FY -33.887 FZ 0.592 MX 1.555 MY 0.285 MZ -17.738
102 DL+LL+ 178 FX 6.276 FY -29.467 FZ -0.816 MX -2.220 MY 0.542 MZ -17.515
102 DL+LL+ 179 FX 6.612 FY -31.673 FZ 0.534 MX 1.495 MY -0.357 MZ -18.501
102 DL+LL+ 180 FX 0.221 FY -5.174 FZ 0.056 MX 0.092 MY 0.047 MZ -0.324
102 DL+LL+ 181 FX 0.435 FY -6.517 FZ 0.085 MX 0.117 MY 0.047 MZ -0.623
102 DL+LL+ 186 FX 0.235 FY -7.557 FZ -0.085 MX -0.105 MY 0.047 MZ -0.336
102 DL+LL+ 187 FX 0.446 FY -9.548 FZ -0.057 MX -0.080 MY 0.047 MZ -0.633
103 DL+LL+ 3 FX -3.825 FY -85.373 FZ -0.248 MX -0.353 MY -0.008 MZ 7.841
103 DL+LL+ 9 FX -4.188 FY -90.583 FZ -0.194 MX -0.308 MY -0.010 MZ 8.136
103 DL+LL+ 15 FX -3.939 FY -84.746 FZ 0.003 MX -0.141 MY -0.010 MZ 7.998
103 DL+LL+ 43 FX -6.027 FY -59.134 FZ -0.486 MX -0.540 MY 0.016 MZ 9.716
103 DL+LL+ 44 FX -4.659 FY -62.791 FZ -0.197 MX -0.293 MY -0.027 MZ 8.542
103 DL+LL+ 45 FX -6.152 FY -58.892 FZ 0.298 MX 0.127 MY -0.030 MZ 9.886
103 DL+LL+ 68 FX -3.484 FY -13.633 FZ -0.181 MX -0.188 MY 0.032 MZ 5.826
103 DL+LL+ 69 FX -3.569 FY -13.487 FZ 0.120 MX 0.090 MY -0.022 MZ 5.941
103 DL+LL+ 92 FX -4.900 FY -39.928 FZ -0.192 MX -0.198 MY -0.041 MZ 7.067
103 DL+LL+ 93 FX -4.975 FY -40.081 FZ 0.096 MX 0.055 MY 0.041 MZ 7.21
103 DL+LL+ 120 FX -2.650 FY -1.710 FZ -0.031 MX -0.022 MY -0.036 MZ 4.993
103 DL+LL+ 121 FX -2.594 FY 0.731 FZ 0.035 MX 0.030 MY 0.002 MZ 5.389
103 DL+LL+ 122 FX -1.278 FY -6.377 FZ -0.037 MX -0.032 MY -0.022 MZ 1.797
103 DL+LL+ 123 FX -1.303 FY -7.009 FZ 0.026 MX 0.023 MY 0.015 MZ 1.835
103 DL+LL+ 172 FX -6.021 FY -26.539 FZ 0.894 MX 2.845 MY -1.061 MZ 17.069
103 DL+LL+ 173 FX -6.523 FY -28.992 FZ -0.700 MX -2.238 MY 0.984 MZ 18.462
103 DL+LL+ 174 FX -6.317 FY -37.479 FZ 1.036 MX 2.969 MY 1.144 MZ 18.17
103 DL+LL+ 175 FX -6.667 FY -37.896 FZ -0.860 MX -2.375 MY -1.422 MZ 19.229
103 DL+LL+ 176 FX -6.204 FY 15.647 FZ 0.840 MX 2.310 MY 0.112 MZ 17.196
103 DL+LL+ 177 FX -6.726 FY 16.438 FZ -0.535 MX -1.515 MY -0.308 MZ 18.603
103 DL+LL+ 178 FX -6.441 FY 11.737 FZ 0.900 MX 2.350 MY -0.508 MZ 18.26
103 DL+LL+ 179 FX -6.807 FY 14.164 FZ -0.596 MX -1.553 MY 0.368 MZ 19.332
103 DL+LL+ 180 FX -0.235 FY -7.562 FZ -0.085 MX -0.105 MY -0.047 MZ 0.336
103 DL+LL+ 181 FX -0.446 FY -9.541 FZ -0.057 MX -0.080 MY -0.047 MZ 0.633
103 DL+LL+ 186 FX -0.221 FY -5.169 FZ 0.056 MX 0.092 MY -0.047 MZ 0.324
103 DL+LL+ 187 FX -0.435 FY -6.524 FZ 0.085 MX 0.117 MY -0.047 MZ 0.623
104 DL+LL+ 3 FX -1.563 FY -44.148 FZ 6.292 MX 12.845 MY 0.468 MZ 2.998
104 DL+LL+ 9 FX -0.062 FY -68.486 FZ 10.090 MX 16.085 MY 0.423 MZ 0.066
104 DL+LL+ 15 FX 1.365 FY -83.933 FZ 6.520 MX 13.038 MY 0.465 MZ -2.744
104 DL+LL+ 43 FX -2.202 FY -33.263 FZ 5.113 MX 10.236 MY 0.475 MZ 3.545
104 DL+LL+ 44 FX 0.182 FY -58.790 FZ 7.989 MX 12.695 MY 0.566 MZ -0.144
104 DL+LL+ 45 FX 2.301 FY -77.944 FZ 5.319 MX 10.411 MY 0.452 MZ -3.545
104 DL+LL+ 68 FX -1.241 FY -8.646 FZ 1.694 MX 2.519 MY 0.144 MZ 2.102
104 DL+LL+ 69 FX 1.411 FY -40.074 FZ 1.752 MX 2.571 MY 0.131 MZ -2.195
104 DL+LL+ 92 FX -0.714 FY -22.665 FZ 2.239 MX 3.291 MY 0.175 MZ 1.054
104 DL+LL+ 93 FX 0.970 FY -39.236 FZ 2.316 MX 3.358 MY 0.161 MZ -1.298
104 DL+LL+ 120 FX -0.033 FY -9.652 FZ 1.645 MX 2.294 MY -0.070 MZ -1.12
104 DL+LL+ 121 FX 0.340 FY -25.663 FZ 1.696 MX 2.339 MY -0.084 MZ -4.488

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 11 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED104
RANCHI
DL+LL+ 122 FX -0.310 FY -2.029 FZ 1.088 MX 1.497 MY 0.057 MZ 0.476
104 DL+LL+ 123 FX 0.418 FY -10.740 FZ 1.147 MX 1.549 MY 0.053 MZ -0.564
104 DL+LL+ 172 FX -3.100 FY -3.575 FZ 4.642 MX 12.956 MY 1.559 MZ 8.625
104 DL+LL+ 173 FX 2.649 FY -17.825 FZ 4.539 MX 12.742 MY 1.616 MZ -7.495
104 DL+LL+ 174 FX -0.873 FY -31.096 FZ 4.682 MX 12.995 MY 1.968 MZ 2.708
104 DL+LL+ 175 FX 0.435 FY 8.277 FZ 4.651 MX 12.820 MY 1.868 MZ -1.588
104 DL+LL+ 176 FX -3.172 FY 11.265 FZ 2.366 MX 7.029 MY 2.008 MZ 8.676
104 DL+LL+ 177 FX 2.912 FY -28.449 FZ 2.385 MX 6.967 MY 1.977 MZ -7.699
104 DL+LL+ 178 FX -0.824 FY -15.357 FZ 2.427 MX 7.079 MY 1.889 MZ 2.662
104 DL+LL+ 179 FX 0.584 FY -2.106 FZ 2.327 MX 6.918 MY 1.900 MZ -1.701
104 DL+LL+ 180 FX 0.003 FY -5.663 FZ 0.235 MX 0.351 MY -0.005 MZ -0.008
104 DL+LL+ 181 FX -0.016 FY -8.735 FZ 0.263 MX 0.375 MY -0.005 MZ 0.019
104 DL+LL+ 186 FX 0.017 FY -5.686 FZ 0.250 MX 0.371 MY -0.005 MZ -0.02
104 DL+LL+ 187 FX -0.005 FY -8.729 FZ 0.278 MX 0.396 MY -0.005 MZ 0.01
105 DL+LL+ 3 FX 1.315 FY -84.254 FZ -6.527 MX -13.053 MY -0.453 MZ -2.626
105 DL+LL+ 9 FX -0.079 FY -68.688 FZ -10.102 MX -16.106 MY -0.412 MZ 0.113
105 DL+LL+ 15 FX -1.567 FY -44.103 FZ -6.298 MX -12.860 MY -0.454 MZ 3.005
105 DL+LL+ 43 FX 2.210 FY -77.969 FZ -5.362 MX -10.498 MY -0.436 MZ -3.393
105 DL+LL+ 44 FX 0.160 FY -58.615 FZ -8.056 MX -12.802 MY -0.555 MZ -0.094
105 DL+LL+ 45 FX -2.208 FY -33.149 FZ -5.154 MX -10.322 MY -0.472 MZ 3.553
105 DL+LL+ 68 FX 1.360 FY -39.907 FZ -1.782 MX -2.615 MY -0.125 MZ -2.105
105 DL+LL+ 69 FX -1.245 FY -8.514 FZ -1.710 MX -2.545 MY -0.142 MZ 2.107
105 DL+LL+ 92 FX 0.921 FY -39.410 FZ -2.337 MX -3.390 MY -0.159 MZ -1.237
105 DL+LL+ 93 FX -0.731 FY -22.668 FZ -2.261 MX -3.324 MY -0.176 MZ 1.076
105 DL+LL+ 120 FX 0.330 FY -24.583 FZ -1.711 MX -2.357 MY 0.092 MZ -4.297
105 DL+LL+ 121 FX -0.049 FY -11.052 FZ -1.664 MX -2.314 MY 0.072 MZ -1.31
105 DL+LL+ 122 FX 0.402 FY -10.162 FZ -1.154 MX -1.557 MY -0.056 MZ -0.542
105 DL+LL+ 123 FX -0.312 FY -1.977 FZ -1.085 MX -1.497 MY -0.058 MZ 0.479
105 DL+LL+ 172 FX 2.675 FY -17.874 FZ -4.515 MX -12.692 MY -1.567 MZ -7.565
105 DL+LL+ 173 FX -3.059 FY -3.754 FZ -4.595 MX -12.807 MY -1.564 MZ 8.516
105 DL+LL+ 174 FX 0.510 FY 8.474 FZ -4.636 MX -12.777 MY -1.858 MZ -1.804
105 DL+LL+ 175 FX -0.832 FY -30.792 FZ -4.625 MX -12.839 MY -1.946 MZ 2.58
105 DL+LL+ 176 FX 2.938 FY -28.575 FZ -2.400 MX -6.999 MY -1.943 MZ -7.769
105 DL+LL+ 177 FX -3.129 FY 10.999 FZ -2.329 MX -6.927 MY -2.001 MZ 8.565
105 DL+LL+ 178 FX 0.659 FY -2.372 FZ -2.342 MX -6.949 MY -1.855 MZ -1.918
105 DL+LL+ 179 FX -0.779 FY -15.403 FZ -2.389 MX -6.976 MY -1.889 MZ 2.532
105 DL+LL+ 180 FX -0.017 FY -7.072 FZ -0.263 MX -0.363 MY 0.005 MZ 0.02
105 DL+LL+ 181 FX 0.005 FY -7.323 FZ -0.235 MX -0.338 MY 0.005 MZ -0.01
105 DL+LL+ 186 FX -0.003 FY -7.040 FZ -0.278 MX -0.384 MY 0.005 MZ 0.008
105 DL+LL+ 187 FX 0.016 FY -7.343 FZ -0.250 MX -0.359 MY 0.005 MZ -0.019
106 DL+SL( 3 FX 3.590 FY -15.452 FZ 0.026 MX 0.161 MY 0.021 MZ -7.523
106 DL+SL( 9 FX 4.031 FY -17.226 FZ 0.189 MX 0.300 MY 0.019 MZ -7.964
106 DL+SL( 15 FX 3.742 FY -15.814 FZ 0.215 MX 0.321 MY 0.019 MZ -7.772
106 DL+SL( 43 FX 6.047 FY -30.009 FZ 0.250 MX 0.302 MY 0.014 MZ -9.617
106 DL+SL( 44 FX 4.976 FY -31.268 FZ 0.147 MX 0.213 MY 0.037 MZ -8.778
106 DL+SL( 45 FX 6.244 FY -30.166 FZ -0.124 MX -0.018 MY 0.015 MZ -9.905
106 DL+SL( 68 FX 3.596 FY -26.666 FZ 0.097 MX 0.100 MY -0.017 MZ -5.85
106 DL+SL( 69 FX 3.720 FY -26.860 FZ -0.072 MX -0.056 MY 0.014 MZ -6.034
106 DL+SL( 92 FX 5.069 FY -11.146 FZ 0.098 MX 0.106 MY 0.054 MZ -7.22
106 DL+SL( 93 FX 5.171 FY -10.864 FZ -0.035 MX -0.011 MY -0.053 MZ -7.397
106 DL+SL( 120 FX 2.934 FY -28.918 FZ -0.024 MX -0.030 MY 0.053 MZ -9.858
106 DL+SL( 121 FX 2.875 FY -33.237 FZ -0.005 MX -0.006 MY -0.012 MZ -10.544
106 DL+SL( 122 FX 1.360 FY -4.701 FZ -0.022 MX -0.022 MY 0.023 MZ -1.859
106 DL+SL( 123 FX 1.396 FY -4.495 FZ 0.030 MX 0.025 MY -0.019 MZ -1.913
106 DL+SL( 172 FX 5.668 FY 5.443 FZ -0.794 MX -2.632 MY 1.059 MZ -16.211
106 DL+SL( 173 FX 6.185 FY 7.777 FZ 0.665 MX 2.203 MY -0.942 MZ -17.645
106 DL+SL( 174 FX 6.017 FY 15.419 FZ -0.993 MX -2.784 MY -1.054 MZ -17.445
106 DL+SL( 175 FX 6.339 FY 15.948 FZ 0.882 MX 2.369 MY 1.362 MZ -18.432
106 DL+SL( 176 FX 6.035 FY -33.257 FZ -0.880 MX -2.297 MY -0.057 MZ -16.486
106 DL+SL( 177 FX 6.575 FY -34.182 FZ 0.596 MX 1.565 MY 0.291 MZ -17.936
106 DL+SL( 178 FX 6.331 FY -29.698 FZ -0.820 MX -2.236 MY 0.539 MZ -17.689
106 DL+SL( 179 FX 6.672 FY -31.937 FZ 0.536 MX 1.504 MY -0.358 MZ -18.69
106 DL+SL( 180 FX 0.221 FY -3.938 FZ 0.056 MX 0.090 MY 0.047 MZ -0.324
106 DL+SL( 181 FX 0.435 FY -4.682 FZ 0.086 MX 0.116 MY 0.047 MZ -0.623
106 DL+SL( 186 FX 0.235 FY -6.323 FZ -0.085 MX -0.107 MY 0.047 MZ -0.336
106 DL+SL( 187 FX 0.446 FY -7.711 FZ -0.056 MX -0.082 MY 0.047 MZ -0.633
107 DL+SL( 3 FX -3.813 FY -57.795 FZ -0.235 MX -0.336 MY -0.011 MZ 7.788
107 DL+SL( 9 FX -4.204 FY -61.217 FZ -0.186 MX -0.295 MY -0.012 MZ 8.13
107 DL+SL( 15 FX -3.935 FY -57.269 FZ 0.000 MX -0.137 MY -0.012 MZ 7.964
107 DL+SL( 43 FX -6.015 FY -37.045 FZ -0.473 MX -0.515 MY 0.008 MZ 9.663
107 DL+SL( 44 FX -4.685 FY -39.445 FZ -0.180 MX -0.266 MY -0.029 MZ 8.545
107 DL+SL( 45 FX -6.155 FY -36.855 FZ 0.306 MX 0.148 MY -0.025 MZ 9.858
107 DL+SL( 68 FX -3.490 FY -5.379 FZ -0.177 MX -0.181 MY 0.028 MZ 5.806
107 DL+SL( 69 FX -3.583 FY -5.246 FZ 0.127 MX 0.099 MY -0.019 MZ 5.935
107 DL+SL( 92 FX -4.938 FY -28.926 FZ -0.188 MX -0.191 MY -0.044 MZ 7.096
107 DL+SL( 93 FX -5.018 FY -29.122 FZ 0.103 MX 0.064 MY 0.044 MZ 7.245
107 DL+SL( 120 FX -2.662 FY 1.897 FZ -0.020 MX -0.011 MY -0.040 MZ 5.545
107 DL+SL( 121 FX -2.604 FY 4.939 FZ 0.033 MX 0.029 MY 0.004 MZ 6.031
107 DL+SL( 122 FX -1.289 FY -5.264 FZ -0.030 MX -0.025 MY -0.022 MZ 1.802
107 DL+SL( 123 FX -1.315 FY -5.795 FZ 0.021 MX 0.019 MY 0.016 MZ 1.843
107 DL+SL( 172 FX -5.950 FY -26.187 FZ 0.867 MX 2.795 MY -1.057 MZ 16.868
107 DL+SL( 173 FX -6.451 FY -28.628 FZ -0.681 MX -2.207 MY 0.974 MZ 18.259
107 DL+SL( 174 FX -6.255 FY -36.916 FZ 1.033 MX 2.936 MY 1.122 MZ 17.991
107 DL+SL( 175 FX -6.599 FY -37.328 FZ -0.865 MX -2.362 MY -1.404 MZ 19.033
107 DL+SL( 176 FX -6.138 FY 15.347 FZ 0.834 MX 2.294 MY 0.101 MZ 16.999
107 DL+SL( 177 FX -6.660 FY 16.142 FZ -0.531 MX -1.504 MY -0.302 MZ 18.405
107 DL+SL( 178 FX -6.386 FY 11.506 FZ 0.896 MX 2.334 MY -0.512 MZ 18.087
107 DL+SL( 179 FX -6.747 FY 13.901 FZ -0.593 MX -1.544 MY 0.367 MZ 19.143
107 DL+SL( 180 FX -0.235 FY -6.326 FZ -0.085 MX -0.107 MY -0.047 MZ 0.336
107 DL+SL( 181 FX -0.446 FY -7.706 FZ -0.056 MX -0.082 MY -0.047 MZ 0.633
107 DL+SL( 186 FX -0.221 FY -3.934 FZ 0.056 MX 0.090 MY -0.047 MZ 0.324
107 DL+SL( 187 FX -0.435 FY -4.688 FZ 0.086 MX 0.116 MY -0.047 MZ 0.623
108 DL+SL( 3 FX -1.550 FY -16.571 FZ 6.305 MX 12.861 MY 0.465 MZ 2.945
108 DL+SL( 9 FX -0.078 FY -39.120 FZ 10.098 MX 16.098 MY 0.421 MZ 0.059
108 DL+SL( 15 FX 1.370 FY -56.457 FZ 6.517 MX 13.041 MY 0.463 MZ -2.778
108 DL+SL( 43 FX -2.189 FY -11.174 FZ 5.126 MX 10.260 MY 0.467 MZ 3.492
108 DL+SL( 44 FX 0.156 FY -35.444 FZ 8.006 MX 12.722 MY 0.565 MZ -0.142
108 DL+SL( 45 FX 2.299 FY -55.908 FZ 5.328 MX 10.431 MY 0.457 MZ -3.573
108 DL+SL( 68 FX -1.247 FY -0.392 FZ 1.698 MX 2.527 MY 0.139 MZ 2.081

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 12 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED108
RANCHI
DL+SL( 69 FX 1.396 FY -31.833 FZ 1.759 MX 2.579 MY 0.134 MZ -2.201
108 DL+SL( 92 FX -0.752 FY -11.663 FZ 2.243 MX 3.298 MY 0.172 MZ 1.084
108 DL+SL( 93 FX 0.928 FY -28.277 FZ 2.323 MX 3.367 MY 0.164 MZ -1.263
108 DL+SL( 120 FX -0.046 FY -6.045 FZ 1.656 MX 2.305 MY -0.074 MZ -0.568
108 DL+SL( 121 FX 0.330 FY -21.454 FZ 1.694 MX 2.338 MY -0.082 MZ -3.845
108 DL+SL( 122 FX -0.321 FY -0.916 FZ 1.095 MX 1.504 MY 0.057 MZ 0.481
108 DL+SL( 123 FX 0.406 FY -9.526 FZ 1.142 MX 1.545 MY 0.054 MZ -0.556
108 DL+SL( 172 FX -3.029 FY -3.222 FZ 4.615 MX 12.905 MY 1.564 MZ 8.424
108 DL+SL( 173 FX 2.721 FY -17.461 FZ 4.559 MX 12.772 MY 1.606 MZ -7.698
108 DL+SL( 174 FX -0.811 FY -30.534 FZ 4.679 MX 12.962 MY 1.947 MZ 2.529
108 DL+SL( 175 FX 0.503 FY 8.845 FZ 4.647 MX 12.833 MY 1.886 MZ -1.783
108 DL+SL( 176 FX -3.107 FY 10.965 FZ 2.360 MX 7.013 MY 1.997 MZ 8.479
108 DL+SL( 177 FX 2.978 FY -28.744 FZ 2.389 MX 6.978 MY 1.984 MZ -7.897
108 DL+SL( 178 FX -0.769 FY -15.589 FZ 2.422 MX 7.063 MY 1.885 MZ 2.489
108 DL+SL( 179 FX 0.644 FY -2.370 FZ 2.330 MX 6.927 MY 1.899 MZ -1.89
108 DL+SL( 180 FX 0.004 FY -4.427 FZ 0.235 MX 0.348 MY -0.005 MZ -0.009
108 DL+SL( 181 FX -0.016 FY -6.901 FZ 0.263 MX 0.374 MY -0.005 MZ 0.019
108 DL+SL( 186 FX 0.017 FY -4.451 FZ 0.250 MX 0.369 MY -0.005 MZ -0.02
108 DL+SL( 187 FX -0.005 FY -6.892 FZ 0.278 MX 0.394 MY -0.005 MZ 0.009
109 DL+SL(- 3 FX 1.327 FY -56.676 FZ -6.514 MX -13.037 MY -0.456 MZ -2.679
109 DL+SL(- 9 FX -0.095 FY -39.323 FZ -10.095 MX -16.093 MY -0.414 MZ 0.106
109 DL+SL(- 15 FX -1.562 FY -16.627 FZ -6.302 MX -12.857 MY -0.456 MZ 2.971
109 DL+SL(- 43 FX 2.222 FY -55.880 FZ -5.348 MX -10.473 MY -0.445 MZ -3.445
109 DL+SL(- 44 FX 0.134 FY -35.269 FZ -8.039 MX -12.775 MY -0.556 MZ -0.091
109 DL+SL(- 45 FX -2.210 FY -11.113 FZ -5.145 MX -10.302 MY -0.467 MZ 3.525
109 DL+SL(- 68 FX 1.353 FY -31.653 FZ -1.778 MX -2.608 MY -0.129 MZ -2.126
109 DL+SL(- 69 FX -1.259 FY -0.273 FZ -1.703 MX -2.536 MY -0.139 MZ 2.101
109 DL+SL(- 92 FX 0.883 FY -28.409 FZ -2.333 MX -3.383 MY -0.161 MZ -1.207
109 DL+SL(- 93 FX -0.774 FY -11.709 FZ -2.255 MX -3.315 MY -0.173 MZ 1.111
109 DL+SL(- 120 FX 0.318 FY -20.976 FZ -1.700 MX -2.345 MY 0.088 MZ -3.745
109 DL+SL(- 121 FX -0.059 FY -6.844 FZ -1.666 MX -2.315 MY 0.074 MZ -0.667
109 DL+SL(- 122 FX 0.392 FY -9.049 FZ -1.147 MX -1.551 MY -0.056 MZ -0.537
109 DL+SL(- 123 FX -0.325 FY -0.764 FZ -1.091 MX -1.501 MY -0.057 MZ 0.487
109 DL+SL(- 172 FX 2.747 FY -17.521 FZ -4.541 MX -12.742 MY -1.562 MZ -7.767
109 DL+SL(- 173 FX -2.987 FY -3.390 FZ -4.575 MX -12.777 MY -1.574 MZ 8.313
109 DL+SL(- 174 FX 0.573 FY 9.036 FZ -4.639 MX -12.810 MY -1.879 MZ -1.983
109 DL+SL(- 175 FX -0.763 FY -30.225 FZ -4.630 MX -12.826 MY -1.928 MZ 2.384
109 DL+SL(- 176 FX 3.004 FY -28.876 FZ -2.405 MX -7.015 MY -1.954 MZ -7.966
109 DL+SL(- 177 FX -3.063 FY 10.704 FZ -2.325 MX -6.917 MY -1.995 MZ 8.366
109 DL+SL(- 178 FX 0.714 FY -2.604 FZ -2.347 MX -6.965 MY -1.858 MZ -2.091
109 DL+SL(- 179 FX -0.719 FY -15.666 FZ -2.387 MX -6.967 MY -1.890 MZ 2.343
109 DL+SL(- 180 FX -0.017 FY -5.836 FZ -0.264 MX -0.366 MY 0.005 MZ 0.02
109 DL+SL(- 181 FX 0.005 FY -5.488 FZ -0.234 MX -0.340 MY 0.005 MZ -0.009
109 DL+SL(- 186 FX -0.004 FY -5.805 FZ -0.279 MX -0.387 MY 0.005 MZ 0.009
109 DL+SL(- 187 FX 0.016 FY -5.507 FZ -0.249 MX -0.361 MY 0.005 MZ -0.019
110 DL+LL 3 FX 1.151 FY -60.391 FZ -0.124 MX -0.120 MY 0.042 MZ -2.095
110 DL+LL 9 FX 1.357 FY -64.538 FZ -0.021 MX -0.034 MY 0.000 MZ -2.358
110 DL+LL 15 FX 1.164 FY -60.248 FZ 0.097 MX 0.066 MY -0.040 MZ -2.114
110 DL+LL 43 FX 1.866 FY -54.894 FZ -0.048 MX -0.058 MY 0.022 MZ -2.705
110 DL+LL 44 FX 1.773 FY -57.934 FZ -0.018 MX -0.033 MY 0.008 MZ -2.713
110 DL+LL 45 FX 1.881 FY -54.801 FZ 0.015 MX -0.007 MY -0.025 MZ -2.727
110 DL+LL 68 FX 1.169 FY -26.293 FZ -0.006 MX -0.008 MY 0.018 MZ -1.694
110 DL+LL 69 FX 1.179 FY -26.265 FZ -0.005 MX -0.007 MY -0.021 MZ -1.708
110 DL+LL 92 FX 1.602 FY -28.945 FZ -0.019 MX -0.020 MY 0.020 MZ -2.152
110 DL+LL 93 FX 1.624 FY -28.827 FZ 0.006 MX 0.002 MY -0.023 MZ -2.188
110 DL+LL 120 FX 1.110 FY -20.088 FZ -0.024 MX -0.022 MY 0.017 MZ -4.786
110 DL+LL 121 FX 1.089 FY -22.102 FZ 0.015 MX 0.014 MY -0.009 MZ -5.089
110 DL+LL 122 FX 0.483 FY -6.108 FZ -0.025 MX -0.022 MY 0.005 MZ -0.581
110 DL+LL 123 FX 0.485 FY -6.374 FZ 0.032 MX 0.028 MY -0.007 MZ -0.587
110 DL+LL 172 FX 1.746 FY -6.616 FZ -0.101 MX -0.397 MY 0.225 MZ -4.222
110 DL+LL 173 FX 1.833 FY -6.360 FZ 0.126 MX 0.467 MY -0.213 MZ -4.471
110 DL+LL 174 FX 1.820 FY -5.220 FZ -0.178 MX -0.451 MY -0.232 MZ -4.485
110 DL+LL 175 FX 1.875 FY -4.977 FZ 0.207 MX 0.523 MY 0.267 MZ -4.648
110 DL+LL 176 FX 1.903 FY -14.359 FZ -0.165 MX -0.386 MY 0.015 MZ -4.343
110 DL+LL 177 FX 1.996 FY -14.692 FZ 0.166 MX 0.392 MY 0.014 MZ -4.597
110 DL+LL 178 FX 1.968 FY -13.921 FZ -0.105 MX -0.332 MY 0.077 MZ -4.601
110 DL+LL 179 FX 2.029 FY -14.115 FZ 0.106 MX 0.339 MY -0.054 MZ -4.768
110 DL+LL 180 FX 0.514 FY -5.064 FZ -0.014 MX -0.006 MY 0.002 MZ -0.658
110 DL+LL 181 FX 0.515 FY -6.737 FZ 0.014 MX 0.018 MY -0.002 MZ -0.659
110 DL+LL 186 FX 0.528 FY -7.668 FZ -0.014 MX -0.006 MY 0.002 MZ -0.67
110 DL+LL 187 FX 0.526 FY -9.328 FZ 0.014 MX 0.019 MY -0.002 MZ -0.668
111 DL+LL+ 3 FX -1.324 FY -67.567 FZ -0.112 MX -0.091 MY -0.028 MZ 2.309
111 DL+LL+ 9 FX -1.419 FY -72.156 FZ 0.006 MX 0.009 MY 0.010 MZ 2.379
111 DL+LL+ 15 FX -1.293 FY -67.350 FZ 0.122 MX 0.108 MY 0.050 MZ 2.224
111 DL+LL+ 43 FX -1.734 FY -56.296 FZ -0.195 MX -0.198 MY 0.016 MZ 2.658
111 DL+LL+ 44 FX -1.337 FY -59.418 FZ -0.047 MX -0.073 MY 0.003 MZ 2.306
111 DL+LL+ 45 FX -1.668 FY -56.247 FZ 0.146 MX 0.091 MY 0.004 MZ 2.545
111 DL+LL+ 68 FX -0.977 FY -22.494 FZ -0.078 MX -0.084 MY 0.000 MZ 1.57
111 DL+LL+ 69 FX -0.942 FY -22.551 FZ 0.045 MX 0.032 MY 0.010 MZ 1.505
111 DL+LL+ 92 FX -1.294 FY -32.950 FZ -0.077 MX -0.077 MY -0.004 MZ 1.828
111 DL+LL+ 93 FX -1.285 FY -32.892 FZ 0.047 MX 0.031 MY 0.007 MZ 1.824
111 DL+LL+ 120 FX -0.759 FY -14.469 FZ -0.041 MX -0.040 MY 0.006 MZ -0.786
111 DL+LL+ 121 FX -0.745 FY -15.022 FZ 0.017 MX 0.011 MY -0.003 MZ -0.875
111 DL+LL+ 122 FX -0.363 FY -6.078 FZ -0.040 MX -0.037 MY -0.004 MZ 0.478
111 DL+LL+ 123 FX -0.353 FY -6.334 FZ 0.031 MX 0.024 MY 0.002 MZ 0.464
111 DL+LL+ 172 FX -2.070 FY -14.572 FZ 0.209 MX 0.601 MY -0.209 MZ 4.995
111 DL+LL+ 173 FX -2.133 FY -14.928 FZ -0.162 MX -0.473 MY 0.242 MZ 5.181
111 DL+LL+ 174 FX -2.076 FY -16.919 FZ 0.202 MX 0.605 MY 0.315 MZ 5.076
111 DL+LL+ 175 FX -2.158 FY -17.033 FZ -0.159 MX -0.480 MY -0.315 MZ 5.306
111 DL+LL+ 176 FX -2.032 FY -3.381 FZ 0.114 MX 0.369 MY 0.046 MZ 4.96
111 DL+LL+ 177 FX -2.098 FY -3.215 FZ -0.092 MX -0.306 MY -0.032 MZ 5.148
111 DL+LL+ 178 FX -2.021 FY -4.165 FZ 0.173 MX 0.415 MY -0.032 MZ 5.03
111 DL+LL+ 179 FX -2.105 FY -3.780 FZ -0.151 MX -0.353 MY 0.055 MZ 5.262
111 DL+LL+ 180 FX -0.527 FY -7.672 FZ -0.014 MX -0.006 MY -0.002 MZ 0.67
111 DL+LL+ 181 FX -0.526 FY -9.320 FZ 0.014 MX 0.019 MY 0.002 MZ 0.668
111 DL+LL+ 186 FX -0.514 FY -5.059 FZ -0.014 MX -0.006 MY -0.002 MZ 0.657
111 DL+LL+ 187 FX -0.515 FY -6.744 FZ 0.014 MX 0.018 MY 0.002 MZ 0.659
112 DL+LL+ 3 FX -0.347 FY -59.039 FZ 1.965 MX 3.780 MY 0.033 MZ 0.618
112 DL+LL+ 9 FX -0.070 FY -68.551 FZ 3.092 MX 4.741 MY 0.035 MZ 0.083

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 13 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED112
RANCHI
DL+LL+ 15 FX 0.131 FY -69.099 FZ 2.193 MX 3.973 MY 0.031 MZ -0.324
112 DL+LL+ 43 FX -0.336 FY -49.903 FZ 2.092 MX 3.796 MY 0.077 MZ 0.609
112 DL+LL+ 44 FX 0.173 FY -58.748 FZ 3.062 MX 4.624 MY 0.139 MZ -0.125
112 DL+LL+ 45 FX 0.404 FY -61.259 FZ 2.301 MX 3.972 MY 0.051 MZ -0.559
112 DL+LL+ 68 FX -0.141 FY -20.235 FZ 0.927 MX 1.250 MY 0.019 MZ 0.322
112 DL+LL+ 69 FX 0.293 FY -28.378 FZ 0.990 MX 1.308 MY 0.006 MZ -0.385
112 DL+LL+ 92 FX -0.042 FY -28.640 FZ 1.007 MX 1.369 MY 0.015 MZ 0.114
112 DL+LL+ 93 FX 0.272 FY -33.386 FZ 1.084 MX 1.437 MY 0.001 MZ -0.324
112 DL+LL+ 120 FX 0.126 FY -14.937 FZ 0.984 MX 1.272 MY -0.102 MZ -2.292
112 DL+LL+ 121 FX 0.173 FY -20.365 FZ 1.033 MX 1.316 MY -0.118 MZ -3.294
112 DL+LL+ 122 FX -0.004 FY -4.607 FZ 0.619 MX 0.801 MY 0.011 MZ 0.046
112 DL+LL+ 123 FX 0.107 FY -7.897 FZ 0.681 MX 0.855 MY 0.009 MZ -0.127
112 DL+LL+ 172 FX -1.131 FY -7.428 FZ 2.369 MX 5.776 MY 0.630 MZ 3.072
112 DL+LL+ 173 FX 0.706 FY -14.071 FZ 2.275 MX 5.599 MY 0.668 MZ -2.009
112 DL+LL+ 174 FX -0.249 FY -18.258 FZ 2.345 MX 5.766 MY 0.755 MZ 0.765
112 DL+LL+ 175 FX -0.147 FY -4.379 FZ 2.331 MX 5.634 MY 0.659 MZ 0.23
112 DL+LL+ 176 FX -1.087 FY -1.844 FZ 1.419 MX 3.382 MY 0.831 MZ 3.035
112 DL+LL+ 177 FX 0.852 FY -15.485 FZ 1.458 MX 3.370 MY 0.790 MZ -2.126
112 DL+LL+ 178 FX -0.160 FY -11.976 FZ 1.479 MX 3.432 MY 0.795 MZ 0.69
112 DL+LL+ 179 FX -0.036 FY -5.601 FZ 1.399 MX 3.320 MY 0.790 MZ 0.145
112 DL+LL+ 180 FX -0.007 FY -4.942 FZ 0.686 MX 0.918 MY -0.001 MZ 0.006
112 DL+LL+ 181 FX -0.005 FY -9.543 FZ 0.715 MX 0.943 MY -0.001 MZ 0.005
112 DL+LL+ 186 FX 0.007 FY -4.937 FZ 0.686 MX 0.918 MY 0.001 MZ -0.006
112 DL+LL+ 187 FX 0.005 FY -9.550 FZ 0.714 MX 0.942 MY 0.001 MZ -0.005
113 DL+LL+ 3 FX 0.099 FY -69.354 FZ -2.200 MX -3.988 MY -0.018 MZ -0.247
113 DL+LL+ 9 FX -0.071 FY -68.645 FZ -3.104 MX -4.761 MY -0.024 MZ 0.095
113 DL+LL+ 15 FX -0.333 FY -58.930 FZ -1.972 MX -3.795 MY -0.020 MZ 0.585
113 DL+LL+ 43 FX 0.344 FY -61.301 FZ -2.342 MX -4.057 MY -0.039 MZ -0.457
113 DL+LL+ 44 FX 0.170 FY -58.679 FZ -3.128 MX -4.731 MY -0.127 MZ -0.113
113 DL+LL+ 45 FX -0.310 FY -49.809 FZ -2.134 MX -3.883 MY -0.071 MZ 0.567
113 DL+LL+ 68 FX 0.260 FY -28.284 FZ -1.015 MX -1.345 MY 0.000 MZ -0.326
113 DL+LL+ 69 FX -0.127 FY -20.179 FZ -0.948 MX -1.282 MY -0.017 MZ 0.298
113 DL+LL+ 92 FX 0.249 FY -33.451 FZ -1.105 MX -1.468 MY 0.001 MZ -0.296
113 DL+LL+ 93 FX -0.033 FY -28.536 FZ -1.029 MX -1.402 MY -0.016 MZ 0.102
113 DL+LL+ 120 FX 0.170 FY -19.300 FZ -1.050 MX -1.335 MY 0.124 MZ -3.125
113 DL+LL+ 121 FX 0.118 FY -16.353 FZ -1.001 MX -1.291 MY 0.106 MZ -2.503
113 DL+LL+ 122 FX 0.096 FY -7.584 FZ -0.684 MX -0.861 MY -0.011 MZ -0.113
113 DL+LL+ 123 FX -0.001 FY -4.821 FZ -0.619 MX -0.803 MY -0.013 MZ 0.041
113 DL+LL+ 172 FX 0.706 FY -14.021 FZ -2.242 MX -5.511 MY -0.638 MZ -2.012
113 DL+LL+ 173 FX -1.115 FY -7.508 FZ -2.330 MX -5.664 MY -0.615 MZ 3.03
113 DL+LL+ 174 FX -0.114 FY -4.365 FZ -2.299 MX -5.547 MY -0.644 MZ 0.139
113 DL+LL+ 175 FX -0.250 FY -18.135 FZ -2.304 MX -5.652 MY -0.737 MZ 0.762
113 DL+LL+ 176 FX 0.852 FY -15.464 FZ -1.453 MX -3.352 MY -0.765 MZ -2.128
113 DL+LL+ 177 FX -1.069 FY -1.965 FZ -1.401 MX -3.329 MY -0.814 MZ 2.991
113 DL+LL+ 178 FX -0.005 FY -5.753 FZ -1.394 MX -3.302 MY -0.761 MZ 0.054
113 DL+LL+ 179 FX -0.158 FY -11.907 FZ -1.461 MX -3.378 MY -0.779 MZ 0.687
113 DL+LL+ 180 FX -0.007 FY -7.794 FZ -0.715 MX -0.931 MY 0.001 MZ 0.006
113 DL+LL+ 181 FX -0.005 FY -6.515 FZ -0.686 MX -0.906 MY 0.001 MZ 0.005
113 DL+LL+ 186 FX 0.007 FY -7.789 FZ -0.715 MX -0.931 MY -0.001 MZ -0.006
113 DL+LL+ 187 FX 0.005 FY -6.522 FZ -0.686 MX -0.906 MY -0.001 MZ -0.005
114 DL+WL 3 FX 1.164 FY -32.814 FZ -0.111 MX -0.104 MY 0.039 MZ -2.148
114 DL+WL 9 FX 1.341 FY -35.172 FZ -0.013 MX -0.021 MY -0.002 MZ -2.364
114 DL+WL 15 FX 1.168 FY -32.772 FZ 0.094 MX 0.069 MY -0.042 MZ -2.148
114 DL+WL 43 FX 1.879 FY -32.805 FZ -0.035 MX -0.033 MY 0.013 MZ -2.758
114 DL+WL 44 FX 1.747 FY -34.588 FZ -0.001 MX -0.005 MY 0.006 MZ -2.711
114 DL+WL 45 FX 1.879 FY -32.765 FZ 0.023 MX 0.014 MY -0.020 MZ -2.755
114 DL+WL 68 FX 1.163 FY -18.040 FZ -0.002 MX -0.001 MY 0.014 MZ -1.714
114 DL+WL 69 FX 1.164 FY -18.024 FZ 0.002 MX 0.001 MY -0.018 MZ -1.714
114 DL+WL 92 FX 1.563 FY -17.943 FZ -0.015 MX -0.013 MY 0.018 MZ -2.123
114 DL+WL 93 FX 1.581 FY -17.868 FZ 0.013 MX 0.011 MY -0.020 MZ -2.153
114 DL+WL 120 FX 1.098 FY -16.481 FZ -0.013 MX -0.011 MY 0.012 MZ -4.233
114 DL+WL 121 FX 1.079 FY -17.894 FZ 0.013 MX 0.013 MY -0.007 MZ -4.446
114 DL+WL 122 FX 0.473 FY -4.995 FZ -0.018 MX -0.015 MY 0.005 MZ -0.576
114 DL+WL 123 FX 0.473 FY -5.161 FZ 0.026 MX 0.024 MY -0.006 MZ -0.578
114 DL+WL 172 FX 1.818 FY -6.263 FZ -0.128 MX -0.448 MY 0.230 MZ -4.423
114 DL+WL 173 FX 1.905 FY -5.997 FZ 0.145 MX 0.497 MY -0.224 MZ -4.674
114 DL+WL 174 FX 1.882 FY -4.658 FZ -0.181 MX -0.484 MY -0.253 MZ -4.664
114 DL+WL 175 FX 1.944 FY -4.409 FZ 0.202 MX 0.536 MY 0.285 MZ -4.843
114 DL+WL 176 FX 1.969 FY -14.659 FZ -0.171 MX -0.402 MY 0.004 MZ -4.54
114 DL+WL 177 FX 2.062 FY -14.988 FZ 0.170 MX 0.403 MY 0.020 MZ -4.795
114 DL+WL 178 FX 2.023 FY -14.152 FZ -0.110 MX -0.348 MY 0.073 MZ -4.774
114 DL+WL 179 FX 2.089 FY -14.378 FZ 0.108 MX 0.348 MY -0.056 MZ -4.957
114 DL+WL 180 FX 0.514 FY -3.827 FZ -0.015 MX -0.009 MY 0.002 MZ -0.658
114 DL+WL 181 FX 0.515 FY -4.903 FZ 0.014 MX 0.016 MY -0.002 MZ -0.659
114 DL+WL 186 FX 0.527 FY -6.433 FZ -0.015 MX -0.009 MY 0.002 MZ -0.669
114 DL+WL 187 FX 0.526 FY -7.491 FZ 0.015 MX 0.017 MY -0.002 MZ -0.669
115 DL+WL( 3 FX -1.311 FY -39.989 FZ -0.099 MX -0.075 MY -0.031 MZ 2.256
115 DL+WL( 9 FX -1.436 FY -42.791 FZ 0.014 MX 0.022 MY 0.008 MZ 2.373
115 DL+WL( 15 FX -1.288 FY -39.873 FZ 0.119 MX 0.111 MY 0.048 MZ 2.19
115 DL+WL( 43 FX -1.722 FY -34.207 FZ -0.182 MX -0.174 MY 0.007 MZ 2.605
115 DL+WL( 44 FX -1.363 FY -36.072 FZ -0.030 MX -0.045 MY 0.002 MZ 2.309
115 DL+WL( 45 FX -1.671 FY -34.211 FZ 0.154 MX 0.112 MY 0.009 MZ 2.517
115 DL+WL( 68 FX -0.984 FY -14.240 FZ -0.075 MX -0.076 MY -0.005 MZ 1.55
115 DL+WL( 69 FX -0.957 FY -14.310 FZ 0.052 MX 0.041 MY 0.013 MZ 1.499
115 DL+WL( 92 FX -1.333 FY -21.948 FZ -0.073 MX -0.070 MY -0.006 MZ 1.857
115 DL+WL( 93 FX -1.328 FY -21.932 FZ 0.053 MX 0.040 MY 0.010 MZ 1.859
115 DL+WL( 120 FX -0.771 FY -10.862 FZ -0.030 MX -0.028 MY 0.002 MZ -0.233
115 DL+WL( 121 FX -0.755 FY -10.813 FZ 0.015 MX 0.010 MY -0.001 MZ -0.232
115 DL+WL( 122 FX -0.374 FY -4.965 FZ -0.033 MX -0.031 MY -0.004 MZ 0.483
115 DL+WL( 123 FX -0.366 FY -5.120 FZ 0.025 MX 0.020 MY 0.003 MZ 0.473
115 DL+WL( 172 FX -1.999 FY -14.220 FZ 0.182 MX 0.550 MY -0.204 MZ 4.793
115 DL+WL( 173 FX -2.061 FY -14.564 FZ -0.143 MX -0.442 MY 0.231 MZ 4.978
115 DL+WL( 174 FX -2.014 FY -16.357 FZ 0.199 MX 0.572 MY 0.293 MZ 4.897
115 DL+WL( 175 FX -2.089 FY -16.466 FZ -0.163 MX -0.467 MY -0.296 MZ 5.111
115 DL+WL( 176 FX -1.966 FY -3.681 FZ 0.108 MX 0.352 MY 0.035 MZ 4.763
115 DL+WL( 177 FX -2.032 FY -3.510 FZ -0.088 MX -0.296 MY -0.026 MZ 4.95
115 DL+WL( 178 FX -1.966 FY -4.396 FZ 0.168 MX 0.400 MY -0.036 MZ 4.857
115 DL+WL( 179 FX -2.045 FY -4.044 FZ -0.148 MX -0.343 MY 0.054 MZ 5.073
115 DL+WL( 180 FX -0.527 FY -6.436 FZ -0.014 MX -0.009 MY -0.002 MZ 0.669

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 14 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED115
RANCHI
DL+WL( 181 FX -0.526 FY -7.486 FZ 0.015 MX 0.017 MY 0.002 MZ 0.669
115 DL+WL( 186 FX -0.514 FY -3.824 FZ -0.015 MX -0.009 MY -0.002 MZ 0.658
115 DL+WL( 187 FX -0.515 FY -4.908 FZ 0.014 MX 0.016 MY 0.002 MZ 0.659
116 DL+WL 3 FX -0.334 FY -31.461 FZ 1.978 MX 3.797 MY 0.030 MZ 0.565
116 DL+WL 9 FX -0.086 FY -39.185 FZ 3.100 MX 4.753 MY 0.033 MZ 0.077
116 DL+WL 15 FX 0.136 FY -41.623 FZ 2.190 MX 3.976 MY 0.029 MZ -0.358
116 DL+WL 43 FX -0.324 FY -27.814 FZ 2.106 MX 3.820 MY 0.069 MZ 0.556
116 DL+WL 44 FX 0.147 FY -35.402 FZ 3.079 MX 4.652 MY 0.137 MZ -0.123
116 DL+WL 45 FX 0.402 FY -39.223 FZ 2.309 MX 3.992 MY 0.056 MZ -0.587
116 DL+WL 68 FX -0.147 FY -11.981 FZ 0.930 MX 1.257 MY 0.015 MZ 0.302
116 DL+WL 69 FX 0.278 FY -20.137 FZ 0.997 MX 1.317 MY 0.009 MZ -0.391
116 DL+WL 92 FX -0.080 FY -17.639 FZ 1.011 MX 1.376 MY 0.012 MZ 0.144
116 DL+WL 93 FX 0.229 FY -22.426 FZ 1.091 MX 1.446 MY 0.004 MZ -0.289
116 DL+WL 120 FX 0.114 FY -11.330 FZ 0.995 MX 1.283 MY -0.106 MZ -1.74
116 DL+WL 121 FX 0.163 FY -16.156 FZ 1.031 MX 1.315 MY -0.116 MZ -2.652
116 DL+WL 122 FX -0.014 FY -3.494 FZ 0.625 MX 0.807 MY 0.011 MZ 0.051
116 DL+WL 123 FX 0.094 FY -6.683 FZ 0.675 MX 0.851 MY 0.010 MZ -0.119
116 DL+WL 172 FX -1.060 FY -7.075 FZ 2.342 MX 5.725 MY 0.635 MZ 2.871
116 DL+WL 173 FX 0.778 FY -13.707 FZ 2.295 MX 5.630 MY 0.658 MZ -2.212
116 DL+WL 174 FX -0.187 FY -17.696 FZ 2.342 MX 5.733 MY 0.733 MZ 0.586
116 DL+WL 175 FX -0.078 FY -3.811 FZ 2.326 MX 5.647 MY 0.678 MZ 0.034
116 DL+WL 176 FX -1.021 FY -2.145 FZ 1.414 MX 3.366 MY 0.820 MZ 2.838
116 DL+WL 177 FX 0.918 FY -15.781 FZ 1.462 MX 3.380 MY 0.797 MZ -2.324
116 DL+WL 178 FX -0.105 FY -12.208 FZ 1.474 MX 3.416 MY 0.791 MZ 0.517
116 DL+WL 179 FX 0.024 FY -5.864 FZ 1.401 MX 3.329 MY 0.789 MZ -0.045
116 DL+WL 180 FX -0.007 FY -3.706 FZ 0.686 MX 0.915 MY -0.001 MZ 0.006
116 DL+WL 181 FX -0.005 FY -7.708 FZ 0.715 MX 0.941 MY -0.001 MZ 0.005
116 DL+WL 186 FX 0.007 FY -3.703 FZ 0.686 MX 0.915 MY 0.001 MZ -0.006
116 DL+WL 187 FX 0.005 FY -7.713 FZ 0.715 MX 0.941 MY 0.001 MZ -0.005
117 DL+WL( 3 FX 0.112 FY -41.777 FZ -2.187 MX -3.972 MY -0.021 MZ -0.3
117 DL+WL( 9 FX -0.088 FY -39.279 FZ -3.096 MX -4.748 MY -0.026 MZ 0.089
117 DL+WL( 15 FX -0.328 FY -31.454 FZ -1.975 MX -3.792 MY -0.022 MZ 0.551
117 DL+WL( 43 FX 0.356 FY -39.213 FZ -2.328 MX -4.033 MY -0.047 MZ -0.51
117 DL+WL( 44 FX 0.144 FY -35.333 FZ -3.111 MX -4.703 MY -0.129 MZ -0.11
117 DL+WL( 45 FX -0.313 FY -27.773 FZ -2.126 MX -3.862 MY -0.066 MZ 0.539
117 DL+WL( 68 FX 0.253 FY -20.031 FZ -1.011 MX -1.338 MY -0.005 MZ -0.347
117 DL+WL( 69 FX -0.141 FY -11.937 FZ -0.941 MX -1.273 MY -0.014 MZ 0.292
117 DL+WL( 92 FX 0.211 FY -22.449 FZ -1.101 MX -1.461 MY -0.002 MZ -0.267
117 DL+WL( 93 FX -0.076 FY -17.577 FZ -1.023 MX -1.393 MY -0.013 MZ 0.137
117 DL+WL( 120 FX 0.158 FY -15.693 FZ -1.039 MX -1.323 MY 0.120 MZ -2.573
117 DL+WL( 121 FX 0.108 FY -12.145 FZ -1.004 MX -1.292 MY 0.108 MZ -1.861
117 DL+WL( 122 FX 0.086 FY -6.471 FZ -0.677 MX -0.854 MY -0.011 MZ -0.108
117 DL+WL( 123 FX -0.013 FY -3.607 FZ -0.624 MX -0.808 MY -0.012 MZ 0.049
117 DL+WL( 172 FX 0.778 FY -13.668 FZ -2.269 MX -5.562 MY -0.633 MZ -2.213
117 DL+WL( 173 FX -1.043 FY -7.145 FZ -2.310 MX -5.633 MY -0.626 MZ 2.827
117 DL+WL( 174 FX -0.051 FY -3.803 FZ -2.302 MX -5.580 MY -0.665 MZ -0.04
117 DL+WL( 175 FX -0.182 FY -17.568 FZ -2.309 MX -5.639 MY -0.719 MZ 0.567
117 DL+WL( 176 FX 0.918 FY -15.765 FZ -1.459 MX -3.368 MY -0.776 MZ -2.325
117 DL+WL( 177 FX -1.003 FY -2.260 FZ -1.397 MX -3.318 MY -0.807 MZ 2.793
117 DL+WL( 178 FX 0.050 FY -5.985 FZ -1.399 MX -3.317 MY -0.764 MZ -0.119
117 DL+WL( 179 FX -0.098 FY -12.171 FZ -1.458 MX -3.369 MY -0.780 MZ 0.497
117 DL+WL( 180 FX -0.007 FY -6.558 FZ -0.715 MX -0.933 MY 0.001 MZ 0.006
117 DL+WL( 181 FX -0.006 FY -4.680 FZ -0.686 MX -0.907 MY 0.001 MZ 0.005
117 DL+WL( 186 FX 0.007 FY -6.554 FZ -0.715 MX -0.933 MY -0.001 MZ -0.006
117 DL+WL( 187 FX 0.006 FY -4.685 FZ -0.686 MX -0.907 MY -0.001 MZ -0.005
118 DL+EQL 3 FX 3.589 FY -15.704 FZ 0.026 MX 0.161 MY 0.021 MZ -7.521
118 DL+EQL 9 FX 4.030 FY -17.504 FZ 0.189 MX 0.300 MY 0.019 MZ -7.964
118 DL+EQL 15 FX 3.741 FY -16.067 FZ 0.215 MX 0.321 MY 0.019 MZ -7.77
118 DL+EQL 43 FX 6.047 FY -30.232 FZ 0.250 MX 0.302 MY 0.014 MZ -9.616
118 DL+EQL 44 FX 4.976 FY -31.524 FZ 0.147 MX 0.213 MY 0.037 MZ -8.777
118 DL+EQL 45 FX 6.243 FY -30.388 FZ -0.123 MX -0.018 MY 0.015 MZ -9.904
118 DL+EQL 68 FX 3.596 FY -26.766 FZ 0.097 MX 0.100 MY -0.018 MZ -5.85
118 DL+EQL 69 FX 3.720 FY -26.960 FZ -0.072 MX -0.055 MY 0.014 MZ -6.033
118 DL+EQL 92 FX 5.069 FY -11.270 FZ 0.098 MX 0.106 MY 0.054 MZ -7.219
118 DL+EQL 93 FX 5.171 FY -10.990 FZ -0.035 MX -0.011 MY -0.053 MZ -7.396
118 DL+EQL 120 FX 2.934 FY -28.991 FZ -0.023 MX -0.029 MY 0.053 MZ -9.868
118 DL+EQL 121 FX 2.875 FY -33.313 FZ -0.006 MX -0.006 MY -0.012 MZ -10.554
118 DL+EQL 122 FX 1.360 FY -4.816 FZ -0.021 MX -0.021 MY 0.023 MZ -1.858
118 DL+EQL 123 FX 1.396 FY -4.610 FZ 0.029 MX 0.025 MY -0.019 MZ -1.912
118 DL+EQL 172 FX 5.672 FY -1.634 FZ -0.800 MX -2.642 MY 1.060 MZ -16.218
118 DL+EQL 173 FX 6.189 FY 0.701 FZ 0.671 MX 2.213 MY -0.944 MZ -17.652
118 DL+EQL 174 FX 6.022 FY 8.323 FZ -0.991 MX -2.788 MY -1.055 MZ -17.459
118 DL+EQL 175 FX 6.345 FY 8.853 FZ 0.880 MX 2.373 MY 1.363 MZ -18.447
118 DL+EQL 176 FX 6.030 FY -40.492 FZ -0.882 MX -2.304 MY -0.056 MZ -16.485
118 DL+EQL 177 FX 6.570 FY -41.418 FZ 0.598 MX 1.572 MY 0.290 MZ -17.936
118 DL+EQL 178 FX 6.331 FY -36.921 FZ -0.823 MX -2.243 MY 0.540 MZ -17.699
118 DL+EQL 179 FX 6.672 FY -39.160 FZ 0.539 MX 1.511 MY -0.360 MZ -18.701
118 DL+EQL 180 FX 0.222 FY -4.205 FZ 0.058 MX 0.091 MY 0.047 MZ -0.324
118 DL+EQL 181 FX 0.435 FY -4.959 FZ 0.084 MX 0.114 MY 0.047 MZ -0.623
118 DL+EQL 186 FX 0.235 FY -6.589 FZ -0.083 MX -0.106 MY 0.047 MZ -0.336
118 DL+EQL 187 FX 0.446 FY -7.988 FZ -0.058 MX -0.084 MY 0.047 MZ -0.633
119 DL+EQL 3 FX -3.813 FY -58.048 FZ -0.235 MX -0.336 MY -0.011 MZ 7.789
119 DL+EQL 9 FX -4.205 FY -61.495 FZ -0.186 MX -0.295 MY -0.012 MZ 8.131
119 DL+EQL 15 FX -3.935 FY -57.522 FZ 0.000 MX -0.138 MY -0.012 MZ 7.965
119 DL+EQL 43 FX -6.015 FY -37.268 FZ -0.473 MX -0.515 MY 0.008 MZ 9.664
119 DL+EQL 44 FX -4.686 FY -39.701 FZ -0.180 MX -0.266 MY -0.029 MZ 8.546
119 DL+EQL 45 FX -6.155 FY -37.078 FZ 0.306 MX 0.148 MY -0.025 MZ 9.859
119 DL+EQL 68 FX -3.491 FY -5.479 FZ -0.177 MX -0.181 MY 0.028 MZ 5.807
119 DL+EQL 69 FX -3.584 FY -5.346 FZ 0.127 MX 0.099 MY -0.019 MZ 5.935
119 DL+EQL 92 FX -4.939 FY -29.051 FZ -0.188 MX -0.191 MY -0.044 MZ 7.097
119 DL+EQL 93 FX -5.019 FY -29.248 FZ 0.103 MX 0.064 MY 0.044 MZ 7.246
119 DL+EQL 120 FX -2.662 FY 1.825 FZ -0.020 MX -0.010 MY -0.040 MZ 5.535
119 DL+EQL 121 FX -2.605 FY 4.863 FZ 0.032 MX 0.028 MY 0.004 MZ 6.021
119 DL+EQL 122 FX -1.289 FY -5.380 FZ -0.030 MX -0.025 MY -0.022 MZ 1.803
119 DL+EQL 123 FX -1.316 FY -5.911 FZ 0.021 MX 0.018 MY 0.016 MZ 1.844
119 DL+EQL 172 FX -5.946 FY -33.264 FZ 0.861 MX 2.785 MY -1.055 MZ 16.862
119 DL+EQL 173 FX -6.447 FY -35.705 FZ -0.675 MX -2.197 MY 0.973 MZ 18.253
119 DL+EQL 174 FX -6.249 FY -44.012 FZ 1.035 MX 2.932 MY 1.122 MZ 17.977
119 DL+EQL 175 FX -6.593 FY -44.423 FZ -0.867 MX -2.358 MY -1.403 MZ 19.019

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 15 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED119
RANCHI
DL+EQL 176 FX -6.144 FY 8.112 FZ 0.831 MX 2.287 MY 0.102 MZ 16.999
119 DL+EQL 177 FX -6.665 FY 8.907 FZ -0.529 MX -1.497 MY -0.303 MZ 18.405
119 DL+EQL 178 FX -6.386 FY 4.283 FZ 0.893 MX 2.328 MY -0.511 MZ 18.077
119 DL+EQL 179 FX -6.747 FY 6.677 FZ -0.591 MX -1.537 MY 0.365 MZ 19.132
119 DL+EQL 180 FX -0.234 FY -6.593 FZ -0.083 MX -0.106 MY -0.047 MZ 0.336
119 DL+EQL 181 FX -0.446 FY -7.982 FZ -0.058 MX -0.084 MY -0.047 MZ 0.633
119 DL+EQL 186 FX -0.222 FY -4.200 FZ 0.058 MX 0.091 MY -0.047 MZ 0.324
119 DL+EQL 187 FX -0.435 FY -4.965 FZ 0.084 MX 0.114 MY -0.047 MZ 0.623
120 DL+EQL 3 FX -1.551 FY -16.823 FZ 6.305 MX 12.861 MY 0.465 MZ 2.946
120 DL+EQL 9 FX -0.079 FY -39.399 FZ 10.098 MX 16.098 MY 0.421 MZ 0.06
120 DL+EQL 15 FX 1.369 FY -56.709 FZ 6.517 MX 13.041 MY 0.463 MZ -2.777
120 DL+EQL 43 FX -2.190 FY -11.397 FZ 5.126 MX 10.260 MY 0.467 MZ 3.493
120 DL+EQL 44 FX 0.156 FY -35.700 FZ 8.006 MX 12.722 MY 0.565 MZ -0.141
120 DL+EQL 45 FX 2.298 FY -56.130 FZ 5.328 MX 10.431 MY 0.457 MZ -3.572
120 DL+EQL 68 FX -1.248 FY -0.493 FZ 1.698 MX 2.527 MY 0.139 MZ 2.082
120 DL+EQL 69 FX 1.396 FY -31.933 FZ 1.759 MX 2.579 MY 0.134 MZ -2.2
120 DL+EQL 92 FX -0.752 FY -11.788 FZ 2.243 MX 3.298 MY 0.172 MZ 1.085
120 DL+EQL 93 FX 0.927 FY -28.403 FZ 2.323 MX 3.367 MY 0.164 MZ -1.262
120 DL+EQL 120 FX -0.046 FY -6.118 FZ 1.656 MX 2.305 MY -0.074 MZ -0.578
120 DL+EQL 121 FX 0.330 FY -21.530 FZ 1.693 MX 2.338 MY -0.082 MZ -3.856
120 DL+EQL 122 FX -0.321 FY -1.031 FZ 1.095 MX 1.504 MY 0.057 MZ 0.481
120 DL+EQL 123 FX 0.405 FY -9.642 FZ 1.141 MX 1.545 MY 0.054 MZ -0.556
120 DL+EQL 172 FX -3.025 FY -10.300 FZ 4.609 MX 12.895 MY 1.566 MZ 8.417
120 DL+EQL 173 FX 2.726 FY -24.538 FZ 4.565 MX 12.782 MY 1.604 MZ -7.705
120 DL+EQL 174 FX -0.805 FY -37.629 FZ 4.681 MX 12.957 MY 1.947 MZ 2.515
120 DL+EQL 175 FX 0.509 FY 1.750 FZ 4.645 MX 12.837 MY 1.887 MZ -1.798
120 DL+EQL 176 FX -3.112 FY 3.730 FZ 2.357 MX 7.006 MY 1.998 MZ 8.48
120 DL+EQL 177 FX 2.973 FY -35.979 FZ 2.392 MX 6.985 MY 1.983 MZ -7.897
120 DL+EQL 178 FX -0.769 FY -22.812 FZ 2.420 MX 7.056 MY 1.886 MZ 2.479
120 DL+EQL 179 FX 0.644 FY -9.593 FZ 2.332 MX 6.933 MY 1.897 MZ -1.901
120 DL+EQL 180 FX 0.004 FY -4.694 FZ 0.237 MX 0.350 MY -0.005 MZ -0.009
120 DL+EQL 181 FX -0.016 FY -7.177 FZ 0.261 MX 0.372 MY -0.005 MZ 0.019
120 DL+EQL 186 FX 0.017 FY -4.718 FZ 0.252 MX 0.371 MY -0.005 MZ -0.02
120 DL+EQL 187 FX -0.005 FY -7.169 FZ 0.276 MX 0.393 MY -0.005 MZ 0.01
121 DL+EQL 3 FX 1.326 FY -56.929 FZ -6.514 MX -13.037 MY -0.456 MZ -2.678
121 DL+EQL 9 FX -0.096 FY -39.601 FZ -10.095 MX -16.093 MY -0.414 MZ 0.107
121 DL+EQL 15 FX -1.563 FY -16.879 FZ -6.302 MX -12.857 MY -0.456 MZ 2.972
121 DL+EQL 43 FX 2.221 FY -56.103 FZ -5.349 MX -10.473 MY -0.445 MZ -3.444
121 DL+EQL 44 FX 0.134 FY -35.525 FZ -8.039 MX -12.775 MY -0.556 MZ -0.09
121 DL+EQL 45 FX -2.211 FY -11.336 FZ -5.145 MX -10.301 MY -0.467 MZ 3.526
121 DL+EQL 68 FX 1.353 FY -31.753 FZ -1.778 MX -2.608 MY -0.129 MZ -2.125
121 DL+EQL 69 FX -1.260 FY -0.373 FZ -1.703 MX -2.536 MY -0.139 MZ 2.102
121 DL+EQL 92 FX 0.882 FY -28.533 FZ -2.333 MX -3.383 MY -0.162 MZ -1.206
121 DL+EQL 93 FX -0.775 FY -11.835 FZ -2.255 MX -3.314 MY -0.173 MZ 1.112
121 DL+EQL 120 FX 0.318 FY -21.049 FZ -1.699 MX -2.345 MY 0.088 MZ -3.755
121 DL+EQL 121 FX -0.059 FY -6.920 FZ -1.667 MX -2.315 MY 0.074 MZ -0.678
121 DL+EQL 122 FX 0.392 FY -9.165 FZ -1.147 MX -1.550 MY -0.056 MZ -0.537
121 DL+EQL 123 FX -0.325 FY -0.880 FZ -1.091 MX -1.501 MY -0.057 MZ 0.487
121 DL+EQL 172 FX 2.751 FY -24.598 FZ -4.548 MX -12.752 MY -1.561 MZ -7.773
121 DL+EQL 173 FX -2.983 FY -10.466 FZ -4.569 MX -12.767 MY -1.575 MZ 8.306
121 DL+EQL 174 FX 0.578 FY 1.941 FZ -4.637 MX -12.814 MY -1.879 MZ -1.998
121 DL+EQL 175 FX -0.757 FY -37.319 FZ -4.632 MX -12.822 MY -1.927 MZ 2.37
121 DL+EQL 176 FX 2.998 FY -36.110 FZ -2.408 MX -7.022 MY -1.953 MZ -7.966
121 DL+EQL 177 FX -3.068 FY 3.469 FZ -2.322 MX -6.910 MY -1.996 MZ 8.366
121 DL+EQL 178 FX 0.714 FY -9.827 FZ -2.349 MX -6.971 MY -1.857 MZ -2.101
121 DL+EQL 179 FX -0.719 FY -22.890 FZ -2.384 MX -6.960 MY -1.892 MZ 2.332
121 DL+EQL 180 FX -0.017 FY -6.103 FZ -0.262 MX -0.364 MY 0.005 MZ 0.02
121 DL+EQL 181 FX 0.005 FY -5.764 FZ -0.236 MX -0.342 MY 0.005 MZ -0.01
121 DL+EQL 186 FX -0.004 FY -6.072 FZ -0.277 MX -0.385 MY 0.005 MZ 0.009
121 DL+EQL 187 FX 0.016 FY -5.784 FZ -0.251 MX -0.363 MY 0.005 MZ -0.019
122 DL+EQ 3 FX 1.163 FY -33.067 FZ -0.111 MX -0.104 MY 0.039 MZ -2.147
122 DL+EQ 9 FX 1.340 FY -35.450 FZ -0.013 MX -0.022 MY -0.002 MZ -2.363
122 DL+EQ 15 FX 1.168 FY -33.024 FZ 0.094 MX 0.069 MY -0.042 MZ -2.147
122 DL+EQ 43 FX 1.878 FY -33.028 FZ -0.035 MX -0.033 MY 0.013 MZ -2.757
122 DL+EQ 44 FX 1.747 FY -34.844 FZ -0.001 MX -0.005 MY 0.006 MZ -2.71
122 DL+EQ 45 FX 1.878 FY -32.988 FZ 0.023 MX 0.014 MY -0.020 MZ -2.754
122 DL+EQ 68 FX 1.162 FY -18.140 FZ -0.002 MX -0.001 MY 0.014 MZ -1.714
122 DL+EQ 69 FX 1.164 FY -18.124 FZ 0.002 MX 0.001 MY -0.018 MZ -1.713
122 DL+EQ 92 FX 1.563 FY -18.068 FZ -0.015 MX -0.013 MY 0.017 MZ -2.122
122 DL+EQ 93 FX 1.580 FY -17.993 FZ 0.013 MX 0.011 MY -0.020 MZ -2.152
122 DL+EQ 120 FX 1.098 FY -16.554 FZ -0.013 MX -0.011 MY 0.012 MZ -4.244
122 DL+EQ 121 FX 1.079 FY -17.970 FZ 0.012 MX 0.013 MY -0.007 MZ -4.457
122 DL+EQ 122 FX 0.472 FY -5.110 FZ -0.018 MX -0.015 MY 0.005 MZ -0.576
122 DL+EQ 123 FX 0.472 FY -5.277 FZ 0.026 MX 0.024 MY -0.006 MZ -0.578
122 DL+EQ 172 FX 1.822 FY -13.341 FZ -0.134 MX -0.458 MY 0.231 MZ -4.43
122 DL+EQ 173 FX 1.909 FY -13.073 FZ 0.152 MX 0.507 MY -0.225 MZ -4.681
122 DL+EQ 174 FX 1.888 FY -11.753 FZ -0.179 MX -0.488 MY -0.254 MZ -4.678
122 DL+EQ 175 FX 1.950 FY -11.504 FZ 0.201 MX 0.540 MY 0.285 MZ -4.858
122 DL+EQ 176 FX 1.963 FY -21.894 FZ -0.174 MX -0.409 MY 0.005 MZ -4.54
122 DL+EQ 177 FX 2.056 FY -22.223 FZ 0.172 MX 0.410 MY 0.019 MZ -4.795
122 DL+EQ 178 FX 2.023 FY -21.375 FZ -0.112 MX -0.355 MY 0.074 MZ -4.785
122 DL+EQ 179 FX 2.089 FY -21.602 FZ 0.111 MX 0.355 MY -0.057 MZ -4.968
122 DL+EQ 180 FX 0.514 FY -4.094 FZ -0.013 MX -0.007 MY 0.002 MZ -0.658
122 DL+EQ 181 FX 0.515 FY -5.179 FZ 0.012 MX 0.015 MY -0.002 MZ -0.659
122 DL+EQ 186 FX 0.527 FY -6.699 FZ -0.013 MX -0.007 MY 0.002 MZ -0.669
122 DL+EQ 187 FX 0.526 FY -7.768 FZ 0.013 MX 0.015 MY -0.002 MZ -0.668
123 DL+EQ 3 FX -1.312 FY -40.242 FZ -0.100 MX -0.075 MY -0.031 MZ 2.257
123 DL+EQ 9 FX -1.436 FY -43.069 FZ 0.014 MX 0.022 MY 0.008 MZ 2.374
123 DL+EQ 15 FX -1.289 FY -40.126 FZ 0.119 MX 0.111 MY 0.048 MZ 2.191
123 DL+EQ 43 FX -1.722 FY -34.430 FZ -0.182 MX -0.174 MY 0.007 MZ 2.606
123 DL+EQ 44 FX -1.363 FY -36.328 FZ -0.030 MX -0.045 MY 0.002 MZ 2.309
123 DL+EQ 45 FX -1.671 FY -34.433 FZ 0.154 MX 0.112 MY 0.009 MZ 2.518
123 DL+EQ 68 FX -0.985 FY -14.341 FZ -0.075 MX -0.076 MY -0.005 MZ 1.551
123 DL+EQ 69 FX -0.958 FY -14.410 FZ 0.052 MX 0.041 MY 0.013 MZ 1.5
123 DL+EQ 92 FX -1.333 FY -22.073 FZ -0.073 MX -0.070 MY -0.007 MZ 1.858
123 DL+EQ 93 FX -1.329 FY -22.058 FZ 0.054 MX 0.040 MY 0.010 MZ 1.86
123 DL+EQ 120 FX -0.771 FY -10.935 FZ -0.030 MX -0.028 MY 0.001 MZ -0.244
123 DL+EQ 121 FX -0.755 FY -10.890 FZ 0.015 MX 0.010 MY -0.001 MZ -0.243
123 DL+EQ 122 FX -0.374 FY -5.080 FZ -0.033 MX -0.030 MY -0.004 MZ 0.483

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 16 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED123
RANCHI
DL+EQ 123 FX -0.366 FY -5.236 FZ 0.025 MX 0.020 MY 0.003 MZ 0.473
123 DL+EQ 172 FX -1.995 FY -21.297 FZ 0.176 MX 0.540 MY -0.203 MZ 4.787
123 DL+EQ 173 FX -2.057 FY -21.641 FZ -0.137 MX -0.432 MY 0.230 MZ 4.971
123 DL+EQ 174 FX -2.008 FY -23.452 FZ 0.201 MX 0.568 MY 0.293 MZ 4.883
123 DL+EQ 175 FX -2.084 FY -23.560 FZ -0.165 MX -0.463 MY -0.296 MZ 5.096
123 DL+EQ 176 FX -1.972 FY -10.916 FZ 0.105 MX 0.345 MY 0.036 MZ 4.763
123 DL+EQ 177 FX -2.037 FY -10.746 FZ -0.086 MX -0.289 MY -0.027 MZ 4.949
123 DL+EQ 178 FX -1.967 FY -11.619 FZ 0.165 MX 0.393 MY -0.034 MZ 4.847
123 DL+EQ 179 FX -2.045 FY -11.267 FZ -0.146 MX -0.337 MY 0.052 MZ 5.062
123 DL+EQ 180 FX -0.527 FY -6.703 FZ -0.012 MX -0.007 MY -0.002 MZ 0.669
123 DL+EQ 181 FX -0.526 FY -7.762 FZ 0.013 MX 0.015 MY 0.002 MZ 0.668
123 DL+EQ 186 FX -0.514 FY -4.090 FZ -0.013 MX -0.007 MY -0.002 MZ 0.658
123 DL+EQ 187 FX -0.515 FY -5.185 FZ 0.012 MX 0.015 MY 0.002 MZ 0.659
124 DL+EQ 3 FX -0.335 FY -31.714 FZ 1.978 MX 3.797 MY 0.030 MZ 0.566
124 DL+EQ 9 FX -0.087 FY -39.464 FZ 3.100 MX 4.753 MY 0.033 MZ 0.078
124 DL+EQ 15 FX 0.135 FY -41.876 FZ 2.190 MX 3.976 MY 0.029 MZ -0.357
124 DL+EQ 43 FX -0.324 FY -28.037 FZ 2.106 MX 3.820 MY 0.069 MZ 0.557
124 DL+EQ 44 FX 0.146 FY -35.658 FZ 3.079 MX 4.652 MY 0.137 MZ -0.122
124 DL+EQ 45 FX 0.401 FY -39.445 FZ 2.309 MX 3.992 MY 0.056 MZ -0.585
124 DL+EQ 68 FX -0.148 FY -12.082 FZ 0.930 MX 1.257 MY 0.015 MZ 0.303
124 DL+EQ 69 FX 0.278 FY -20.237 FZ 0.997 MX 1.317 MY 0.009 MZ -0.391
124 DL+EQ 92 FX -0.081 FY -17.763 FZ 1.011 MX 1.376 MY 0.012 MZ 0.145
124 DL+EQ 93 FX 0.229 FY -22.552 FZ 1.091 MX 1.446 MY 0.004 MZ -0.288
124 DL+EQ 120 FX 0.114 FY -11.403 FZ 0.995 MX 1.283 MY -0.106 MZ -1.751
124 DL+EQ 121 FX 0.163 FY -16.232 FZ 1.031 MX 1.315 MY -0.116 MZ -2.663
124 DL+EQ 122 FX -0.015 FY -3.609 FZ 0.626 MX 0.808 MY 0.011 MZ 0.052
124 DL+EQ 123 FX 0.094 FY -6.799 FZ 0.675 MX 0.851 MY 0.010 MZ -0.118
124 DL+EQ 172 FX -1.056 FY -14.152 FZ 2.336 MX 5.715 MY 0.636 MZ 2.865
124 DL+EQ 173 FX 0.782 FY -20.783 FZ 2.301 MX 5.640 MY 0.656 MZ -2.219
124 DL+EQ 174 FX -0.181 FY -24.791 FZ 2.344 MX 5.729 MY 0.733 MZ 0.571
124 DL+EQ 175 FX -0.072 FY -10.906 FZ 2.324 MX 5.651 MY 0.678 MZ 0.02
124 DL+EQ 176 FX -1.026 FY -9.380 FZ 1.411 MX 3.359 MY 0.821 MZ 2.839
124 DL+EQ 177 FX 0.913 FY -23.016 FZ 1.464 MX 3.387 MY 0.796 MZ -2.324
124 DL+EQ 178 FX -0.105 FY -19.431 FZ 1.472 MX 3.410 MY 0.792 MZ 0.507
124 DL+EQ 179 FX 0.024 FY -13.088 FZ 1.404 MX 3.336 MY 0.787 MZ -0.055
124 DL+EQ 180 FX -0.006 FY -3.973 FZ 0.688 MX 0.917 MY -0.001 MZ 0.006
124 DL+EQ 181 FX -0.005 FY -7.985 FZ 0.713 MX 0.939 MY -0.001 MZ 0.005
124 DL+EQ 186 FX 0.006 FY -3.969 FZ 0.688 MX 0.917 MY 0.001 MZ -0.006
124 DL+EQ 187 FX 0.005 FY -7.990 FZ 0.713 MX 0.939 MY 0.001 MZ -0.005
125 DL+EQL 3 FX 0.111 FY -42.029 FZ -2.187 MX -3.972 MY -0.021 MZ -0.299
125 DL+EQL 9 FX -0.088 FY -39.558 FZ -3.096 MX -4.748 MY -0.026 MZ 0.089
125 DL+EQL 15 FX -0.329 FY -31.706 FZ -1.975 MX -3.792 MY -0.022 MZ 0.552
125 DL+EQL 43 FX 0.356 FY -39.435 FZ -2.328 MX -4.033 MY -0.047 MZ -0.509
125 DL+EQL 44 FX 0.143 FY -35.589 FZ -3.111 MX -4.703 MY -0.129 MZ -0.109
125 DL+EQL 45 FX -0.313 FY -27.996 FZ -2.126 MX -3.862 MY -0.066 MZ 0.54
125 DL+EQL 68 FX 0.253 FY -20.131 FZ -1.011 MX -1.338 MY -0.005 MZ -0.346
125 DL+EQL 69 FX -0.142 FY -12.037 FZ -0.941 MX -1.273 MY -0.014 MZ 0.293
125 DL+EQL 92 FX 0.210 FY -22.574 FZ -1.101 MX -1.461 MY -0.002 MZ -0.266
125 DL+EQL 93 FX -0.077 FY -17.702 FZ -1.023 MX -1.393 MY -0.013 MZ 0.138
125 DL+EQL 120 FX 0.158 FY -15.765 FZ -1.038 MX -1.323 MY 0.120 MZ -2.583
125 DL+EQL 121 FX 0.108 FY -12.221 FZ -1.004 MX -1.292 MY 0.108 MZ -1.872
125 DL+EQL 122 FX 0.086 FY -6.586 FZ -0.677 MX -0.854 MY -0.011 MZ -0.107
125 DL+EQL 123 FX -0.014 FY -3.723 FZ -0.625 MX -0.808 MY -0.013 MZ 0.05
125 DL+EQL 172 FX 0.782 FY -20.745 FZ -2.275 MX -5.572 MY -0.632 MZ -2.22
125 DL+EQL 173 FX -1.039 FY -14.221 FZ -2.304 MX -5.623 MY -0.627 MZ 2.82
125 DL+EQL 174 FX -0.046 FY -10.898 FZ -2.300 MX -5.584 MY -0.666 MZ -0.054
125 DL+EQL 175 FX -0.176 FY -24.662 FZ -2.310 MX -5.635 MY -0.718 MZ 0.552
125 DL+EQL 176 FX 0.912 FY -23.000 FZ -1.462 MX -3.375 MY -0.775 MZ -2.324
125 DL+EQL 177 FX -1.008 FY -9.496 FZ -1.394 MX -3.311 MY -0.808 MZ 2.793
125 DL+EQL 178 FX 0.050 FY -13.208 FZ -1.401 MX -3.324 MY -0.763 MZ -0.129
125 DL+EQL 179 FX -0.098 FY -19.395 FZ -1.455 MX -3.362 MY -0.781 MZ 0.487
125 DL+EQL 180 FX -0.006 FY -6.824 FZ -0.713 MX -0.931 MY 0.001 MZ 0.006
125 DL+EQL 181 FX -0.006 FY -4.957 FZ -0.688 MX -0.909 MY 0.001 MZ 0.005
125 DL+EQL 186 FX 0.007 FY -6.820 FZ -0.713 MX -0.931 MY -0.001 MZ -0.006
125 DL+EQL 187 FX 0.006 FY -4.962 FZ -0.688 MX -0.909 MY -0.001 MZ -0.005
126 DL+LL 3 FX -0.156 FY -80.567 FZ -0.147 MX -0.130 MY 0.009 MZ 0.234
126 DL+LL 9 FX -0.089 FY -86.082 FZ -0.008 MX -0.013 MY 0.007 MZ 0.112
126 DL+LL 15 FX -0.127 FY -80.338 FZ 0.139 MX 0.111 MY 0.007 MZ 0.164
126 DL+LL 43 FX 0.004 FY -69.798 FZ -0.156 MX -0.164 MY 0.024 MZ 0.096
126 DL+LL 44 FX 0.213 FY -73.698 FZ -0.042 MX -0.067 MY 0.007 MZ -0.148
126 DL+LL 45 FX 0.058 FY -69.711 FZ 0.104 MX 0.055 MY -0.013 MZ 0.006
126 DL+LL 68 FX 0.074 FY -30.471 FZ -0.055 MX -0.060 MY 0.011 MZ -0.001
126 DL+LL 69 FX 0.103 FY -30.493 FZ 0.026 MX 0.017 MY -0.007 MZ -0.053
126 DL+LL 92 FX 0.129 FY -38.952 FZ -0.061 MX -0.062 MY 0.010 MZ -0.113
126 DL+LL 93 FX 0.149 FY -38.848 FZ 0.034 MX 0.022 MY -0.009 MZ -0.138
126 DL+LL 120 FX 0.185 FY -21.488 FZ -0.041 MX -0.039 MY 0.014 MZ -3.398
126 DL+LL 121 FX 0.182 FY -23.042 FZ 0.019 MX 0.015 MY -0.007 MZ -3.637
126 DL+LL 122 FX 0.057 FY -7.764 FZ -0.040 MX -0.037 MY 0.001 MZ -0.041
126 DL+LL 123 FX 0.066 FY -8.093 FZ 0.038 MX 0.032 MY -0.003 MZ -0.053
126 DL+LL 172 FX -0.261 FY -22.252 FZ 0.072 MX 0.152 MY -0.003 MZ 0.654
126 DL+LL 173 FX -0.251 FY -22.332 FZ -0.027 MX -0.029 MY 0.031 MZ 0.629
126 DL+LL 174 FX -0.220 FY -23.008 FZ 0.031 MX 0.131 MY 0.069 MZ 0.547
126 DL+LL 175 FX -0.241 FY -22.940 FZ 0.014 MX -0.007 MY -0.048 MZ 0.602
126 DL+LL 176 FX -0.153 FY -19.862 FZ -0.025 MX 0.010 MY 0.042 MZ 0.567
126 DL+LL 177 FX -0.142 FY -19.950 FZ 0.039 MX 0.034 MY -0.016 MZ 0.541
126 DL+LL 178 FX -0.103 FY -20.110 FZ 0.050 MX 0.072 MY 0.023 MZ 0.453
126 DL+LL 179 FX -0.122 FY -19.972 FZ -0.036 MX -0.028 MY 0.005 MZ 0.506
126 DL+LL 180 FX -0.008 FY -8.293 FZ -0.015 MX -0.006 MY 0.000 MZ 0.007
126 DL+LL 181 FX -0.006 FY -10.381 FZ 0.015 MX 0.021 MY 0.000 MZ 0.006
126 DL+LL 186 FX 0.009 FY -8.287 FZ -0.015 MX -0.006 MY 0.000 MZ -0.007
126 DL+LL 187 FX 0.006 FY -10.391 FZ 0.015 MX 0.021 MY 0.000 MZ -0.006
127 DL+LL+ 3 FX 3.576 FY -43.282 FZ 0.013 MX 0.144 MY 0.023 MZ -7.468
127 DL+LL+ 9 FX 4.046 FY -46.870 FZ 0.182 MX 0.287 MY 0.021 MZ -7.957
127 DL+LL+ 15 FX 3.737 FY -43.543 FZ 0.219 MX 0.318 MY 0.021 MZ -7.736
127 DL+LL+ 43 FX 6.034 FY -52.320 FZ 0.237 MX 0.278 MY 0.023 MZ -9.563
127 DL+LL+ 44 FX 5.001 FY -54.870 FZ 0.130 MX 0.186 MY 0.039 MZ -8.78
127 DL+LL+ 45 FX 6.245 FY -52.424 FZ -0.132 MX -0.039 MY 0.010 MZ -9.877
127 DL+LL+ 68 FX 3.602 FY -35.020 FZ 0.093 MX 0.093 MY -0.014 MZ -5.829
127 DL+LL+ 69 FX 3.734 FY -35.201 FZ -0.079 MX -0.064 MY 0.011 MZ -6.027

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 17 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED127
RANCHI
DL+LL+ 92 FX 5.107 FY -22.272 FZ 0.094 MX 0.099 MY 0.057 MZ -7.248
127 DL+LL+ 93 FX 5.214 FY -21.949 FZ -0.042 MX -0.020 MY -0.056 MZ -7.431
127 DL+LL+ 120 FX 2.946 FY -32.598 FZ -0.034 MX -0.041 MY 0.057 MZ -10.42
127 DL+LL+ 121 FX 2.885 FY -37.521 FZ -0.003 MX -0.005 MY -0.014 MZ -11.197
127 DL+LL+ 122 FX 1.371 FY -5.929 FZ -0.028 MX -0.028 MY 0.023 MZ -1.863
127 DL+LL+ 123 FX 1.408 FY -5.824 FZ 0.035 MX 0.029 MY -0.020 MZ -1.92
127 DL+LL+ 172 FX 5.600 FY -1.987 FZ -0.773 MX -2.592 MY 1.055 MZ -16.016
127 DL+LL+ 173 FX 6.117 FY 0.337 FZ 0.651 MX 2.182 MY -0.933 MZ -17.449
127 DL+LL+ 174 FX 5.960 FY 7.761 FZ -0.989 MX -2.755 MY -1.033 MZ -17.28
127 DL+LL+ 175 FX 6.276 FY 8.286 FZ 0.885 MX 2.360 MY 1.344 MZ -18.251
127 DL+LL+ 176 FX 5.964 FY -40.192 FZ -0.877 MX -2.287 MY -0.045 MZ -16.288
127 DL+LL+ 177 FX 6.504 FY -41.122 FZ 0.594 MX 1.562 MY 0.284 MZ -17.738
127 DL+LL+ 178 FX 6.276 FY -36.690 FZ -0.818 MX -2.227 MY 0.544 MZ -17.526
127 DL+LL+ 179 FX 6.612 FY -38.897 FZ 0.536 MX 1.501 MY -0.358 MZ -18.511
127 DL+LL+ 180 FX 0.221 FY -5.441 FZ 0.058 MX 0.094 MY 0.047 MZ -0.324
127 DL+LL+ 181 FX 0.435 FY -6.793 FZ 0.083 MX 0.116 MY 0.047 MZ -0.624
127 DL+LL+ 186 FX 0.235 FY -7.824 FZ -0.083 MX -0.103 MY 0.047 MZ -0.336
127 DL+LL+ 187 FX 0.445 FY -9.825 FZ -0.059 MX -0.082 MY 0.047 MZ -0.633
128 DL+LL+ 3 FX -3.826 FY -85.625 FZ -0.248 MX -0.353 MY -0.008 MZ 7.842
128 DL+LL+ 9 FX -4.189 FY -90.861 FZ -0.194 MX -0.308 MY -0.010 MZ 8.137
128 DL+LL+ 15 FX -3.940 FY -84.998 FZ 0.003 MX -0.141 MY -0.010 MZ 8
128 DL+LL+ 43 FX -6.028 FY -59.356 FZ -0.486 MX -0.540 MY 0.016 MZ 9.717
128 DL+LL+ 44 FX -4.660 FY -63.047 FZ -0.197 MX -0.293 MY -0.027 MZ 8.543
128 DL+LL+ 45 FX -6.153 FY -59.114 FZ 0.298 MX 0.128 MY -0.030 MZ 9.887
128 DL+LL+ 68 FX -3.484 FY -13.733 FZ -0.181 MX -0.188 MY 0.032 MZ 5.827
128 DL+LL+ 69 FX -3.569 FY -13.587 FZ 0.120 MX 0.090 MY -0.022 MZ 5.942
128 DL+LL+ 92 FX -4.901 FY -40.052 FZ -0.192 MX -0.198 MY -0.041 MZ 7.068
128 DL+LL+ 93 FX -4.976 FY -40.207 FZ 0.096 MX 0.055 MY 0.041 MZ 7.211
128 DL+LL+ 120 FX -2.650 FY -1.783 FZ -0.031 MX -0.022 MY -0.036 MZ 4.983
128 DL+LL+ 121 FX -2.595 FY 0.655 FZ 0.035 MX 0.029 MY 0.002 MZ 5.378
128 DL+LL+ 122 FX -1.279 FY -6.493 FZ -0.037 MX -0.031 MY -0.022 MZ 1.798
128 DL+LL+ 123 FX -1.303 FY -7.125 FZ 0.026 MX 0.022 MY 0.015 MZ 1.836
128 DL+LL+ 172 FX -6.017 FY -33.617 FZ 0.888 MX 2.835 MY -1.060 MZ 17.063
128 DL+LL+ 173 FX -6.519 FY -36.068 FZ -0.694 MX -2.228 MY 0.983 MZ 18.455
128 DL+LL+ 174 FX -6.312 FY -44.574 FZ 1.038 MX 2.965 MY 1.143 MZ 18.156
128 DL+LL+ 175 FX -6.662 FY -44.990 FZ -0.862 MX -2.371 MY -1.422 MZ 19.215
128 DL+LL+ 176 FX -6.209 FY 8.412 FZ 0.837 MX 2.303 MY 0.112 MZ 17.196
128 DL+LL+ 177 FX -6.731 FY 9.202 FZ -0.533 MX -1.508 MY -0.309 MZ 18.603
128 DL+LL+ 178 FX -6.441 FY 4.514 FZ 0.898 MX 2.343 MY -0.507 MZ 18.25
128 DL+LL+ 179 FX -6.807 FY 6.941 FZ -0.593 MX -1.546 MY 0.367 MZ 19.322
128 DL+LL+ 180 FX -0.235 FY -7.829 FZ -0.083 MX -0.103 MY -0.047 MZ 0.336
128 DL+LL+ 181 FX -0.445 FY -9.817 FZ -0.059 MX -0.082 MY -0.047 MZ 0.633
128 DL+LL+ 186 FX -0.221 FY -5.435 FZ 0.058 MX 0.094 MY -0.047 MZ 0.324
128 DL+LL+ 187 FX -0.435 FY -6.801 FZ 0.083 MX 0.116 MY -0.047 MZ 0.624
129 DL+LL+ 3 FX -1.563 FY -44.401 FZ 6.292 MX 12.845 MY 0.468 MZ 2.999
129 DL+LL+ 9 FX -0.063 FY -68.764 FZ 10.090 MX 16.085 MY 0.423 MZ 0.066
129 DL+LL+ 15 FX 1.364 FY -84.185 FZ 6.520 MX 13.038 MY 0.465 MZ -2.743
129 DL+LL+ 43 FX -2.202 FY -33.485 FZ 5.112 MX 10.236 MY 0.475 MZ 3.546
129 DL+LL+ 44 FX 0.182 FY -59.046 FZ 7.989 MX 12.695 MY 0.566 MZ -0.144
129 DL+LL+ 45 FX 2.301 FY -78.166 FZ 5.320 MX 10.411 MY 0.452 MZ -3.544
129 DL+LL+ 68 FX -1.241 FY -8.747 FZ 1.694 MX 2.519 MY 0.143 MZ 2.103
129 DL+LL+ 69 FX 1.410 FY -40.174 FZ 1.752 MX 2.571 MY 0.131 MZ -2.194
129 DL+LL+ 92 FX -0.714 FY -22.789 FZ 2.239 MX 3.291 MY 0.174 MZ 1.055
129 DL+LL+ 93 FX 0.970 FY -39.362 FZ 2.316 MX 3.358 MY 0.161 MZ -1.297
129 DL+LL+ 120 FX -0.033 FY -9.725 FZ 1.645 MX 2.294 MY -0.070 MZ -1.13
129 DL+LL+ 121 FX 0.340 FY -25.739 FZ 1.696 MX 2.339 MY -0.084 MZ -4.498
129 DL+LL+ 122 FX -0.310 FY -2.144 FZ 1.089 MX 1.498 MY 0.057 MZ 0.476
129 DL+LL+ 123 FX 0.418 FY -10.855 FZ 1.147 MX 1.549 MY 0.053 MZ -0.564
129 DL+LL+ 172 FX -3.096 FY -10.652 FZ 4.635 MX 12.946 MY 1.561 MZ 8.619
129 DL+LL+ 173 FX 2.654 FY -24.901 FZ 4.546 MX 12.752 MY 1.615 MZ -7.502
129 DL+LL+ 174 FX -0.868 FY -38.191 FZ 4.684 MX 12.990 MY 1.968 MZ 2.694
129 DL+LL+ 175 FX 0.440 FY 1.182 FZ 4.650 MX 12.824 MY 1.868 MZ -1.602
129 DL+LL+ 176 FX -3.178 FY 4.030 FZ 2.363 MX 7.022 MY 2.009 MZ 8.677
129 DL+LL+ 177 FX 2.907 FY -35.684 FZ 2.388 MX 6.975 MY 1.976 MZ -7.699
129 DL+LL+ 178 FX -0.824 FY -22.580 FZ 2.425 MX 7.072 MY 1.890 MZ 2.652
129 DL+LL+ 179 FX 0.584 FY -9.329 FZ 2.330 MX 6.924 MY 1.899 MZ -1.711
129 DL+LL+ 180 FX 0.004 FY -5.930 FZ 0.237 MX 0.353 MY -0.005 MZ -0.008
129 DL+LL+ 181 FX -0.015 FY -9.011 FZ 0.261 MX 0.374 MY -0.005 MZ 0.019
129 DL+LL+ 186 FX 0.017 FY -5.953 FZ 0.252 MX 0.373 MY -0.005 MZ -0.02
129 DL+LL+ 187 FX -0.005 FY -9.005 FZ 0.276 MX 0.394 MY -0.005 MZ 0.01
130 DL+LL+ 3 FX 1.314 FY -84.506 FZ -6.527 MX -13.053 MY -0.453 MZ -2.625
130 DL+LL+ 9 FX -0.080 FY -68.967 FZ -10.102 MX -16.106 MY -0.412 MZ 0.113
130 DL+LL+ 15 FX -1.568 FY -44.356 FZ -6.298 MX -12.860 MY -0.454 MZ 3.006
130 DL+LL+ 43 FX 2.209 FY -78.191 FZ -5.362 MX -10.498 MY -0.436 MZ -3.392
130 DL+LL+ 44 FX 0.160 FY -58.871 FZ -8.056 MX -12.802 MY -0.555 MZ -0.093
130 DL+LL+ 45 FX -2.208 FY -33.372 FZ -5.153 MX -10.322 MY -0.472 MZ 3.554
130 DL+LL+ 68 FX 1.359 FY -40.007 FZ -1.782 MX -2.615 MY -0.125 MZ -2.105
130 DL+LL+ 69 FX -1.245 FY -8.614 FZ -1.710 MX -2.544 MY -0.142 MZ 2.108
130 DL+LL+ 92 FX 0.921 FY -39.535 FZ -2.337 MX -3.390 MY -0.159 MZ -1.236
130 DL+LL+ 93 FX -0.732 FY -22.794 FZ -2.261 MX -3.324 MY -0.176 MZ 1.077
130 DL+LL+ 120 FX 0.330 FY -24.656 FZ -1.710 MX -2.356 MY 0.092 MZ -4.307
130 DL+LL+ 121 FX -0.049 FY -11.128 FZ -1.665 MX -2.314 MY 0.072 MZ -1.32
130 DL+LL+ 122 FX 0.402 FY -10.278 FZ -1.154 MX -1.557 MY -0.056 MZ -0.541
130 DL+LL+ 123 FX -0.312 FY -2.093 FZ -1.086 MX -1.497 MY -0.058 MZ 0.479
130 DL+LL+ 172 FX 2.679 FY -24.951 FZ -4.521 MX -12.702 MY -1.566 MZ -7.572
130 DL+LL+ 173 FX -3.055 FY -10.830 FZ -4.588 MX -12.797 MY -1.565 MZ 8.509
130 DL+LL+ 174 FX 0.516 FY 1.378 FZ -4.634 MX -12.781 MY -1.858 MZ -1.819
130 DL+LL+ 175 FX -0.826 FY -37.887 FZ -4.627 MX -12.835 MY -1.946 MZ 2.565
130 DL+LL+ 176 FX 2.933 FY -35.810 FZ -2.402 MX -7.006 MY -1.942 MZ -7.769
130 DL+LL+ 177 FX -3.134 FY 3.764 FZ -2.326 MX -6.920 MY -2.002 MZ 8.565
130 DL+LL+ 178 FX 0.659 FY -9.595 FZ -2.345 MX -6.956 MY -1.853 MZ -1.928
130 DL+LL+ 179 FX -0.779 FY -22.626 FZ -2.387 MX -6.969 MY -1.890 MZ 2.522
130 DL+LL+ 180 FX -0.017 FY -7.339 FZ -0.261 MX -0.362 MY 0.005 MZ 0.02
130 DL+LL+ 181 FX 0.005 FY -7.599 FZ -0.237 MX -0.340 MY 0.005 MZ -0.01
130 DL+LL+ 186 FX -0.004 FY -7.306 FZ -0.276 MX -0.382 MY 0.005 MZ 0.008
130 DL+LL+ 187 FX 0.015 FY -7.620 FZ -0.252 MX -0.361 MY 0.005 MZ -0.019
131 DL+LL 3 FX 1.151 FY -60.644 FZ -0.124 MX -0.121 MY 0.042 MZ -2.094
131 DL+LL 9 FX 1.357 FY -64.816 FZ -0.021 MX -0.034 MY 0.000 MZ -2.357
131 DL+LL 15 FX 1.163 FY -60.501 FZ 0.097 MX 0.066 MY -0.040 MZ -2.113

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 18 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED131
RANCHI
DL+LL 43 FX 1.866 FY -55.117 FZ -0.049 MX -0.058 MY 0.022 MZ -2.704
131 DL+LL 44 FX 1.772 FY -58.190 FZ -0.018 MX -0.033 MY 0.008 MZ -2.712
131 DL+LL 45 FX 1.881 FY -55.024 FZ 0.015 MX -0.006 MY -0.025 MZ -2.726
131 DL+LL 68 FX 1.169 FY -26.394 FZ -0.006 MX -0.008 MY 0.018 MZ -1.693
131 DL+LL 69 FX 1.178 FY -26.365 FZ -0.005 MX -0.007 MY -0.021 MZ -1.707
131 DL+LL 92 FX 1.601 FY -29.069 FZ -0.019 MX -0.020 MY 0.020 MZ -2.151
131 DL+LL 93 FX 1.623 FY -28.953 FZ 0.006 MX 0.002 MY -0.023 MZ -2.187
131 DL+LL 120 FX 1.110 FY -20.161 FZ -0.024 MX -0.022 MY 0.017 MZ -4.796
131 DL+LL 121 FX 1.089 FY -22.178 FZ 0.015 MX 0.014 MY -0.009 MZ -5.1
131 DL+LL 122 FX 0.483 FY -6.223 FZ -0.025 MX -0.022 MY 0.005 MZ -0.581
131 DL+LL 123 FX 0.485 FY -6.490 FZ 0.031 MX 0.028 MY -0.007 MZ -0.586
131 DL+LL 172 FX 1.750 FY -13.693 FZ -0.107 MX -0.407 MY 0.226 MZ -4.229
131 DL+LL 173 FX 1.837 FY -13.437 FZ 0.132 MX 0.476 MY -0.215 MZ -4.478
131 DL+LL 174 FX 1.826 FY -12.315 FZ -0.176 MX -0.455 MY -0.232 MZ -4.499
131 DL+LL 175 FX 1.881 FY -12.072 FZ 0.205 MX 0.527 MY 0.267 MZ -4.662
131 DL+LL 176 FX 1.898 FY -21.594 FZ -0.168 MX -0.393 MY 0.016 MZ -4.343
131 DL+LL 177 FX 1.990 FY -21.928 FZ 0.168 MX 0.399 MY 0.013 MZ -4.597
131 DL+LL 178 FX 1.968 FY -21.144 FZ -0.108 MX -0.339 MY 0.078 MZ -4.611
131 DL+LL 179 FX 2.029 FY -21.338 FZ 0.108 MX 0.346 MY -0.056 MZ -4.778
131 DL+LL 180 FX 0.514 FY -5.330 FZ -0.012 MX -0.005 MY 0.002 MZ -0.658
131 DL+LL 181 FX 0.516 FY -7.013 FZ 0.012 MX 0.017 MY -0.002 MZ -0.659
131 DL+LL 186 FX 0.527 FY -7.934 FZ -0.012 MX -0.005 MY 0.002 MZ -0.669
131 DL+LL 187 FX 0.526 FY -9.604 FZ 0.012 MX 0.017 MY -0.002 MZ -0.668
132 DL+LL+ 3 FX -1.325 FY -67.820 FZ -0.112 MX -0.091 MY -0.028 MZ 2.31
132 DL+LL+ 9 FX -1.420 FY -72.435 FZ 0.006 MX 0.009 MY 0.010 MZ 2.38
132 DL+LL+ 15 FX -1.293 FY -67.602 FZ 0.122 MX 0.108 MY 0.050 MZ 2.225
132 DL+LL+ 43 FX -1.735 FY -56.518 FZ -0.195 MX -0.198 MY 0.016 MZ 2.659
132 DL+LL+ 44 FX -1.338 FY -59.674 FZ -0.047 MX -0.073 MY 0.003 MZ 2.307
132 DL+LL+ 45 FX -1.669 FY -56.469 FZ 0.146 MX 0.091 MY 0.004 MZ 2.546
132 DL+LL+ 68 FX -0.978 FY -22.594 FZ -0.079 MX -0.084 MY -0.001 MZ 1.571
132 DL+LL+ 69 FX -0.943 FY -22.651 FZ 0.045 MX 0.032 MY 0.011 MZ 1.506
132 DL+LL+ 92 FX -1.295 FY -33.074 FZ -0.077 MX -0.077 MY -0.004 MZ 1.829
132 DL+LL+ 93 FX -1.286 FY -33.018 FZ 0.047 MX 0.031 MY 0.007 MZ 1.825
132 DL+LL+ 120 FX -0.759 FY -14.542 FZ -0.041 MX -0.039 MY 0.006 MZ -0.796
132 DL+LL+ 121 FX -0.745 FY -15.098 FZ 0.017 MX 0.011 MY -0.003 MZ -0.886
132 DL+LL+ 122 FX -0.364 FY -6.193 FZ -0.040 MX -0.037 MY -0.004 MZ 0.478
132 DL+LL+ 123 FX -0.353 FY -6.449 FZ 0.030 MX 0.024 MY 0.002 MZ 0.465
132 DL+LL+ 172 FX -2.066 FY -21.650 FZ 0.203 MX 0.591 MY -0.208 MZ 4.988
132 DL+LL+ 173 FX -2.129 FY -22.004 FZ -0.156 MX -0.463 MY 0.240 MZ 5.174
132 DL+LL+ 174 FX -2.071 FY -24.014 FZ 0.203 MX 0.601 MY 0.314 MZ 5.062
132 DL+LL+ 175 FX -2.152 FY -24.128 FZ -0.161 MX -0.476 MY -0.314 MZ 5.292
132 DL+LL+ 176 FX -2.037 FY -10.616 FZ 0.111 MX 0.362 MY 0.047 MZ 4.96
132 DL+LL+ 177 FX -2.103 FY -10.450 FZ -0.090 MX -0.299 MY -0.033 MZ 5.148
132 DL+LL+ 178 FX -2.021 FY -11.388 FZ 0.170 MX 0.408 MY -0.031 MZ 5.02
132 DL+LL+ 179 FX -2.105 FY -11.003 FZ -0.149 MX -0.346 MY 0.054 MZ 5.252
132 DL+LL+ 180 FX -0.527 FY -7.939 FZ -0.012 MX -0.005 MY -0.002 MZ 0.669
132 DL+LL+ 181 FX -0.526 FY -9.596 FZ 0.012 MX 0.017 MY 0.002 MZ 0.668
132 DL+LL+ 186 FX -0.514 FY -5.325 FZ -0.012 MX -0.005 MY -0.002 MZ 0.658
132 DL+LL+ 187 FX -0.516 FY -7.021 FZ 0.012 MX 0.016 MY 0.002 MZ 0.659
133 DL+LL 3 FX -0.348 FY -59.292 FZ 1.965 MX 3.780 MY 0.033 MZ 0.619
133 DL+LL 9 FX -0.071 FY -68.829 FZ 3.092 MX 4.741 MY 0.035 MZ 0.084
133 DL+LL 15 FX 0.130 FY -69.352 FZ 2.193 MX 3.973 MY 0.031 MZ -0.323
133 DL+LL 43 FX -0.336 FY -50.125 FZ 2.092 MX 3.796 MY 0.077 MZ 0.61
133 DL+LL 44 FX 0.172 FY -59.004 FZ 3.062 MX 4.624 MY 0.139 MZ -0.124
133 DL+LL 45 FX 0.404 FY -61.482 FZ 2.301 MX 3.972 MY 0.051 MZ -0.558
133 DL+LL 68 FX -0.141 FY -20.336 FZ 0.927 MX 1.250 MY 0.019 MZ 0.323
133 DL+LL 69 FX 0.292 FY -28.478 FZ 0.990 MX 1.308 MY 0.006 MZ -0.384
133 DL+LL 92 FX -0.042 FY -28.765 FZ 1.007 MX 1.369 MY 0.015 MZ 0.115
133 DL+LL 93 FX 0.272 FY -33.512 FZ 1.084 MX 1.437 MY 0.001 MZ -0.323
133 DL+LL 120 FX 0.126 FY -15.010 FZ 0.984 MX 1.272 MY -0.102 MZ -2.303
133 DL+LL 121 FX 0.173 FY -20.441 FZ 1.033 MX 1.315 MY -0.118 MZ -3.305
133 DL+LL 122 FX -0.004 FY -4.722 FZ 0.619 MX 0.801 MY 0.011 MZ 0.047
133 DL+LL 123 FX 0.106 FY -8.012 FZ 0.680 MX 0.855 MY 0.009 MZ -0.126
133 DL+LL 172 FX -1.127 FY -14.505 FZ 2.363 MX 5.766 MY 0.632 MZ 3.066
133 DL+LL 173 FX 0.710 FY -21.147 FZ 2.281 MX 5.609 MY 0.667 MZ -2.016
133 DL+LL 174 FX -0.244 FY -25.353 FZ 2.347 MX 5.761 MY 0.754 MZ 0.75
133 DL+LL 175 FX -0.141 FY -11.474 FZ 2.329 MX 5.638 MY 0.660 MZ 0.215
133 DL+LL 176 FX -1.092 FY -9.079 FZ 1.417 MX 3.375 MY 0.832 MZ 3.036
133 DL+LL 177 FX 0.847 FY -22.721 FZ 1.460 MX 3.377 MY 0.790 MZ -2.126
133 DL+LL 178 FX -0.160 FY -19.200 FZ 1.477 MX 3.425 MY 0.796 MZ 0.68
133 DL+LL 179 FX -0.036 FY -12.824 FZ 1.401 MX 3.327 MY 0.789 MZ 0.134
133 DL+LL 180 FX -0.007 FY -5.209 FZ 0.688 MX 0.920 MY -0.001 MZ 0.006
133 DL+LL 181 FX -0.005 FY -9.819 FZ 0.713 MX 0.941 MY -0.001 MZ 0.004
133 DL+LL 186 FX 0.007 FY -5.204 FZ 0.688 MX 0.920 MY 0.001 MZ -0.006
133 DL+LL 187 FX 0.005 FY -9.827 FZ 0.712 MX 0.941 MY 0.001 MZ -0.004
134 DL+LL+ 3 FX 0.098 FY -69.607 FZ -2.200 MX -3.989 MY -0.018 MZ -0.246
134 DL+LL+ 9 FX -0.072 FY -68.923 FZ -3.104 MX -4.761 MY -0.024 MZ 0.096
134 DL+LL+ 15 FX -0.333 FY -59.183 FZ -1.972 MX -3.795 MY -0.020 MZ 0.586
134 DL+LL+ 43 FX 0.343 FY -61.524 FZ -2.342 MX -4.057 MY -0.039 MZ -0.456
134 DL+LL+ 44 FX 0.169 FY -58.935 FZ -3.128 MX -4.731 MY -0.127 MZ -0.112
134 DL+LL+ 45 FX -0.311 FY -50.032 FZ -2.134 MX -3.883 MY -0.071 MZ 0.568
134 DL+LL+ 68 FX 0.259 FY -28.385 FZ -1.015 MX -1.345 MY -0.001 MZ -0.325
134 DL+LL+ 69 FX -0.127 FY -20.279 FZ -0.948 MX -1.281 MY -0.017 MZ 0.299
134 DL+LL+ 92 FX 0.249 FY -33.575 FZ -1.105 MX -1.468 MY 0.001 MZ -0.296
134 DL+LL+ 93 FX -0.034 FY -28.662 FZ -1.029 MX -1.402 MY -0.016 MZ 0.103
134 DL+LL+ 120 FX 0.170 FY -19.373 FZ -1.049 MX -1.334 MY 0.124 MZ -3.135
134 DL+LL+ 121 FX 0.118 FY -16.429 FZ -1.002 MX -1.291 MY 0.106 MZ -2.514
134 DL+LL+ 122 FX 0.096 FY -7.699 FZ -0.684 MX -0.860 MY -0.011 MZ -0.112
134 DL+LL+ 123 FX -0.001 FY -4.937 FZ -0.619 MX -0.804 MY -0.013 MZ 0.041
134 DL+LL+ 172 FX 0.710 FY -21.098 FZ -2.248 MX -5.521 MY -0.636 MZ -2.019
134 DL+LL+ 173 FX -1.111 FY -14.585 FZ -2.324 MX -5.654 MY -0.617 MZ 3.023
134 DL+LL+ 174 FX -0.108 FY -11.460 FZ -2.297 MX -5.551 MY -0.644 MZ 0.125
134 DL+LL+ 175 FX -0.245 FY -25.230 FZ -2.306 MX -5.648 MY -0.737 MZ 0.748
134 DL+LL+ 176 FX 0.846 FY -22.699 FZ -1.456 MX -3.359 MY -0.764 MZ -2.127
134 DL+LL+ 177 FX -1.074 FY -9.200 FZ -1.398 MX -3.322 MY -0.815 MZ 2.991
134 DL+LL+ 178 FX -0.005 FY -12.976 FZ -1.397 MX -3.309 MY -0.759 MZ 0.044
134 DL+LL+ 179 FX -0.158 FY -19.131 FZ -1.458 MX -3.371 MY -0.780 MZ 0.676
134 DL+LL+ 180 FX -0.007 FY -8.061 FZ -0.713 MX -0.929 MY 0.001 MZ 0.006
134 DL+LL+ 181 FX -0.005 FY -6.791 FZ -0.688 MX -0.907 MY 0.001 MZ 0.005

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 19 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED134
RANCHI
DL+LL+ 186 FX 0.007 FY -8.055 FZ -0.713 MX -0.929 MY -0.001 MZ -0.006
134 DL+LL+ 187 FX 0.005 FY -6.799 FZ -0.688 MX -0.907 MY -0.001 MZ -0.005

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 20 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED RANCHI
GENERAL DESIGN PARAMETERS (FOR UNCRACKED SECTION ACCORDING TO IS:3370(PART-II)-2009):-

Permissible Bending Tensile Stress in concrete ( σ ct ) = 2.0 N/mm2 (Table-1)


Permissible Direct Tensile stress in concrete ( t ) = 1.5 N/mm2 (Table-1)
Permissible Direct Tensile stress in steel = 130 N/mm2 (Table-2)
Permissible Bending tensile stress in steel = 130 N/mm2 (Table-2)
Concrete Grade = M30 Steel Grade = Fe 500

σcbc = 10 N/mm2 σst = 275 N/mm2 m = 9.33

k= mσcbc / (mσcbc +σst )= 0.25

j= (1- k/3 ) = 0.92

R= 0.5 x σcbc j k = 1.16

DESIGN OF LAUNDER BOTTOM SLAB (150 mm THK.):-

Thk. = 150 mm Clear Cover = 25 mm Reinf. Dia. = 8 mm Along Longer Span


8 mm Along Shorter Span

For Uncracked Section, according to IS:3370(Part-II)-2009:- Longer Span is along Y-Direction, Shorter Span is along X-Direction.

Refer Staad Output for Launder Floor Plates …


Plate L/C SQX(N/mm2) SQY(N/mm2) MX MTon-m/m MY MTon-m/m MXY MTon-m/m SX(N/mm2) SY(N/mm2) SXY(N/mm2)
3117 101 DL+LL 0.003 0.003 0.029 0.023 0.001 -0.059 0.028 -0.013
2919 101 DL+LL -0.049 0.002 -0.125 -0.017 -0.003 -0.156 -0.230 0.023
3067 126 DL+LL+EQL 0.002 0.002 0.022 0.028 0.003 -0.029 0.004 -0.054
3115 101 DL+LL -0.010 -0.044 -0.017 -0.103 -0.027 -0.121 -0.159 0.025

For My Moment Along Longer Span For Mx Moment Along Shorter Span

b= 1000 mm b= 1000 mm
d eff = 113.00 mm d eff = 121.00 mm
Reinf.Dia. = 8 mm Reinf.Dia. = 8 mm
Design Moment= 0.069 tm/m Design Moment= 0.083 tm/m
Ast reqd. = Ast reqd. =
[ M/(σst . j . d)] 51.06 mm2/m on Tension Face [ M/(σst . j . d)] 57.86 mm2/m on Tension Face
pt= 0.05 % pt= 0.05 %
Ast provided = 201.06 mm2/m on Tension Face Ast provided = 201.06 mm2/m on Tension Face
pt Provided = 0.18 % pt Provided = 0.17 %

For Sy Force For Sx Force


Max. Sy Force = 2800.00 N/m Max. Sx Force = -2900.00 N/m
Ast = 10.18 mm2/m Ast = 10.55 mm2/m
This area of reinf. is to be distributed equally on two faces. This area of reinf. is to be distributed equally on two faces.
Per face Ast = 5.09 mm2/m for axial tension only Per face Ast = 5.27 mm2/m for axial tension only

Total Ast reqd. per face = 56.15 mm2/m Total Ast reqd. per face = 63.14 mm2/m
Min. Total Ast provided. per face = 201.06 mm2/m Along Y-Direction Min. Total Ast provided. per face = 201.06 mm2/m Along X-Direction
Min. Total pt provided. per face = 0.18 % Along Y-Direction Min. Total pt provided. per face = 0.17 % Along X-Direction

Hence, Provide… Hence, Provide…


At BOTTOM Along Longer Span At TOP Along Longer Span At BOTTOM Along Shorter Span At TOP Along Shorter Span
Bar Dia provided (mm) 8 Bar Dia provided 8 Bar Dia provided (mm) 8 Bar Dia provided (mm) 8
Bar Spacing provided (mm) 250 Bar Spacing provided 250 Bar Spacing provided (mm) 250 Bar Spacing provided (mm) 250
Ast provided (mm /m)
2
201.06 Ast provided 201.06 Ast provided (mm /m)
2 201.06 Ast provided (mm /m)
2 201.06

PROVIDE REINFT. ALONG SHORTER SPAN ON OUTER LAYERS AT TOP & BOTTOM.

Check for Shear


Refer Staad Output for Launder Floor Plates …
SQX (local) SQY (local)
Vmax = N/mm2 Plate L/C
0.033 N/mm2 N/mm2
Ʈv = 0.01 N/mm 2
3072 101 DL+LL 0.026 -0.017
Min. pt Provided = 0.17 % 2919 101 DL+LL -0.049 0.002
Ʈc = 0.33 N/mm2 Hence, SAFE 3075 126 DL+LL+EQL 0.007 0.038
Refer Tables 19 & 20 of IS:456-2000 and Table 61 of SP-16 for Ʈc & Ʈc-max. 2934 101 DL+LL 0.020 -0.045

DESIGN OF LAUNDER VERTICAL WALLS (150 mm THK.):-

Thk. = 150 mm Clear Cover = 25 mm Reinf. Dia. = 8 mm Along Vertical Direction


8 mm Along Horizontal Direction

For Uncracked Section, according to IS:3370(Part-II)-2009:- Vertical Span is along Y-Direction, Horizontal Span is along X-Direction.

Refer Staad Output for Launder Vertical Wall Plates …


Plate L/C SQX(N/mm2) SQY(N/mm2) MX MTon-m/m MY MTon-m/m MXY MTon-m/m SX(N/mm2) SY(N/mm2) SXY(N/mm2)
2790 103 DL+LL+SL(-X 0.025 -0.008 0.089 0.027 -0.022 0.186 0.09 -0.125
2990 103 DL+LL+SL(-X -0.025 0.016 -0.089 -0.023 0.024 0.189 0.087 -0.126
2783 103 DL+LL+SL(-X -0.019 -0.024 0.014 0.084 0.005 0.001 0.104 0.101
2983 103 DL+LL+SL(-X 0.025 0.025 -0.014 -0.082 -0.006 0.005 0.11 0.099

For My Moment Along Vertical Direction For Mx Moment Along Horizontal Direction

b= 1000 mm b= 1000 mm
d eff = 121.00 mm d eff = 113.00 mm
Reinf.Dia. = 8 mm Reinf.Dia. = 8 mm
Design Moment= 0.070 tm/m Design Moment= 0.074 tm/m
Ast req=[ M/(σst . Ast req=[ M/(σst . j .
j . d)] 52.05 mm2/m on Tension Face d)] 55.15 mm2/m on Tension Face
pt= 0.04 % pt= 0.05 %
Ast provided = 201.06 mm2/m on Tension Face Ast provided = 201.06 mm2/m on Tension Face

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 21 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20
Purchaser: Consortium of Contractor:
RASHTRIYA ISPAT NIGAM LIMITED HPFM, a.s., Czech Republic
VISAKHAPATNAM STEEL PLANT INDIA HPIL, Kolkata
Consultant: BEC, Bhilai
MECON LIMITED RANCHI
pt Provided = 0.17 % pt Provided = 0.18 %

For Sy Force For Sx Force


Max. Sy Force= 13750.00 N/m Max. Sx Force= 23625.00 N/m
Ast= 50.00 mm2/m Ast= 85.91 mm2/m
This area of reinf. is to be distributed equally on two faces. This area of reinf. is to be distributed equally on two faces.
Per face Ast= 25.00 mm2/m for axial tension only Per face Ast= 42.95 mm2/m for axial tension only

Total Ast reqd. per face = 77.05 mm2/m Total Ast reqd. per face= 98.10 mm2/m
Min. Total Ast provided per face = 201.06 mm2/m Along Vertical Direction Min. Total Ast provided per face = 201.06 mm2/m Along Horz. Direction
Min. Total pt provided. per face = 0.17 % Along Vertical Direction Min. Total pt provided. per face = 0.18 % Along Horz. Direction

Hence, Provide… Hence, Provide…


On INSIDE Face VERTICALLY On OUTSIDE Face VERTICALLY On INSIDE Face HORZONTALLY On OUTSIDE Face HORZONTALLY
Bar Dia provided (mm) 8 Bar Dia provided (mm) 8 Bar Dia provided (mm) 8 Bar Dia provided (mm) 8
Bar Spacing provided (mm) 250 Bar Spacing provided (mm) 250 Bar Spacing provided (mm) 250 Bar Spacing provided (mm) 250
Ast provided (mm2/m) 201.06 Ast provided (mm2/m) 201.06 Ast provided (mm2/m) 201.06 Ast provided (mm2/m) 201.06

PROVIDE REINFT. ALONG VERTICAL DIRECTION ON OUTER LAYERS ON INSIDE & OUTSIDE FACES.

Check for Shear


Refer Staad Output for Launder Vertical Wall Plates …
SQX (local) SQY (local)
Vmax = N/mm2 Plate L/C
0.027 N/mm2 N/mm2
Ʈv = 0.01 N/mm2 2813 103 DL+LL+SL(-X) 0.029 -0.011
Min. pt Provided = 0.17 % 2990 103 DL+LL+SL(-X) -0.025 0.016
Ʈc = 0.29 N/mm2 Hence, SAFE 3034 101 DL+LL -0.006 0.032
Refer Tables 19 & 20 of IS:456-2000 and Table 61 of SP-16 for Ʈc & Ʈc-max. 2783 103 DL+LL+SL(-X) -0.019 -0.024

CIVIL DESIGN CALCULATION FOR Prep. By: BM


Checked By: SC
DE-OILING BASIN DB80.1A/B DAF80.1A/B Page 22 Appd By: SC
VSP / COB5 / CCP / HPFM / DE / 35 / CD / 5021 R01
Date:06.10.20

You might also like