Scribd
Upload
90 views1 page

OPF Exercise 1 PDF

Uploaded by

ashraf-84
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
90 views1 page

OPF Exercise 1 PDF

Uploaded by

ashraf-84
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Optimal Power Flow Example 1

1. Load Project OPFExample2

2. Run Load Flow:


 Observe T2 and Cable1 loading and Bus4 voltage.
 Record system real and reactive power losses and power grid power factor.

3. Set OPF Study Case:


 Objective: Minimize Real Power and Reactive Power Losses.
 LTC Control: T1 & T2.
 AVR Control: U1 V = 100 % & Gen1 V between [98%, 102%].
 Bus Voltage Constraint: Bus3 V and Bus4 V between [98%, 103%].
 Branch Flow Constraint: T2 & Cable1 100% constraint.

4. Run OPF:
 Observe T2 & Cable1 loading, Bus4 voltage, power factor at the power grid bus.
 Record system real and reactive power losses.
 Check T1 & T2 LTC settings and Gen1 AVR setting.

5. Compare Load Flow and OPF results.


 Reduction in system real power and reactive power losses.
 Improvement in power factor at the power grid bus.

ETAP Workshop Notes ©1996-2009 Operation Technology, Inc. Page 1 of 1

You might also like