Scribd
Upload
98 views1 page

510607F3 Spec - Sheet Rev1 PDF

Uploaded by

Alberto Milla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views1 page

510607F3 Spec - Sheet Rev1 PDF

Uploaded by

Alberto Milla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Desktop Class

Spinpoint F3
Capacity 160GB 250GB 320GB 500GB 750GB 1TB
8MB HD164GJ HD254GJ HD324HJ
Model 16MB HD163GJ HD253GJ HD323HJ HD502HJ
32MB HD754JJ HD103SJ

FEATURES
• MAX.500GB Formatted Capacity Per Disk • Environment friendly product with RoHS compliance
• Serial ATA 3.0Gbps Interface Support • Improved performance with dual-ARM based firmware
• Improved recording stability over temperature with PMR • ATA S.M.A.R.T. Compliant
• Advanced dynamic FOD control for best data integrity • ATA Automatic Acoustic Management Feature
• Intelligent compensation of external disturbance • ATA 48-bit Address Feature
• SATA Native Command Queuing Feature • ATA Device Configuration Overlay Feature
• Device Initiated SATA Power Management • NoiseGuard™
• Rotational vibration sensor(Optional) • SilentSeek™

DRIVE CONFIGURATION ENVIRONMENTAL SPECIFICATIONS


Interface Serial ATA 3.0Gbps Temperature
Buffer DRAM Size2 8 / 16 / 32 Operating 0 ~ 60 °C
Byte per Sector 512 bytes Non-operating -40 ~ 70 °C
Rotational Speed 7,200 RPM Humidity (non-condensing)
Operating 5 ~ 90 %
PERFORMANCE SPECIFICATIONS Non-operating 5 ~ 95 %
Average Seek time (typical) 8.9 ms Linear Shock (1/2 sine pulse)
Average Latency 4.14 ms Operating (2.0ms) 70 G
Data Transfer Rate Non-operating (2.0ms) 300 G
Media to/from Buffer (Max.) 250 MB/sec
Buffer to/from Host (Max.) 300 MB/sec Altitude (relative to sea level)
160~500GB 750GB/1TB Operating -300 to 3,000 m
Drive Ready Time (typical) 8 sec 11 sec Non-operating -300 to 12,000 m

RELIABILITY SPECIFICATIONS PHYSICAL DIMENSION


Non-recoverable Read Error 1 sector in 1015bits Height (Max.) 26.1 mm
Start/Stop Cycles 50,000 Width 101.5 mm
Length 147.0 mm
ACOUSTICS3 160~500GB 750GB/1TB
160~500GB 750GB/1TB Weight (Typ.) 475 g 625 g
Idle(Typ.) 2.5 Bel 2.7 Bel
Performance Seek (Typ.) 2.8 Bel 2.9 Bel

POWER REQUIREMENTS
Voltage +5V±5%, +12V±10% * Note : Design and specifications are subject to change without prior notice.
1.1MB = 1,000,000 Bytes, 1GB=1,000,000,000 Bytes
Capacity1 160~500GB 750GB/1TB 2. A small portion of the 8/16/32MB buffer memory is reserved for
firmware use
3 Average value with a high performance cover.
Spin-up Current (Max.) 2.0A 2.2A 4 Random seek with 30% duty cycle.(Average value)

Seek (typical)4 5.4W 6.7W


Read/Write (typical) 5.8W 7.2W
Idle (typical) 4.8W 6.3W
Standby (typical) 1W 1W
Sleep (typical) 1W 1W

3.5" HDD product specification Rev 1.0


Match with product manual Rev 01

You might also like